FCC ID: 2A4HW-ET924 Electronic Cabinet Lock

Electronic Cabinet Lock / ET924 Note: Please install batteries and set up key cards before installing the lock to cabinet. Video about how to set up admin card and guest cards: https://youtu.be/

WyEsZhTCQVc Features:

1. The cabinet wooden door should not exceed 1.2 inches thick 2. Multiple Unlock Mode: Single Unlock Mode, Dual Unlock Mode 3. 4 x AAA 1.5V batteries required 4. The batteries can last 8-12 months under normal use 5. The sound alarm will alert when the batteries power is low 6. The lock cannot be locked (keep open) if it is in low power status. 7. 1 admin card and up to 12 guest cards can be set up on this lock kit. Operation Instructions 1. Reset Install 4 x AAA 1.5V Batteries. Press the reset button shortly until single-beep sounds. 2. Select Unlock Mode (Single Mode is 1-card-swipe to unlock. Dual Mode is 2-card-swipes to unlock)

(1)Press the reset button shortly until you hear single-beep sounds. it is set in Single Mode.

(2)Press the reset button until you hear double-beep sounds, it is set in Dual Mode. 3. Set Up Admin Card After resetting the lock, swipe a RFID card / tag. This first card / tag is configured as the admin card. 4. Set Up Guest Cards Swipe the admin card and then swipe new cards one by one. These cards are added as guest cards. 5. Delete Cards You can reset the lock if you want to delete the admin card and all guest cards. 6. Low Voltage Alarm It requires 4x AAA 1.5V Batteries to power on. In low battery power status, when you swipe the card to unlock, the voice alarm will alert (you can hear 8 beeps). And the lock cannot be locked (keep open). Please replace the batteries to make the lock work again. Package Includes:

1x Lock Body, 1x Latch, 1 set x Screws, 1 set x RFID Card/Tag, 1x Icon, 2x double-sided tape If you have any question, please feel free to contact us by email: support@etekjoy.com FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

jini ii 8 qi 00 10 20 30 40 a9. 904 30 40 50 60 70 go 90100 19 2 tidlinaliniihiuliny Nias ) 10 Hilti oo, Meare gana joni ir ri EAT TTT A wu OL OZ O OF OS 09 OL 08 06 QQL.01 Oz OF Of Oy 0S 09 02 08 06 ITHAPUTA AGATE ATOPEATUNLAATATUELTAGETTELATTAATTE TT ATTRVERTE TNT

Shenzhen Yitequ Technology Co., Ltd. Agent Authorization Company: Shenzhen Yitequ Technology Co., Ltd. Address: Unit 1 APT 102, Building 701, Tairanguangchang, Binhedadao 9309, Futian, Shenzhen, Guangdong, China Product Name: Electronic Cabinet Lock Model Number(s): ET924 Product Description: Electronic Cabinet Lock We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Weixian Ye Title:

Manager Company: Shenzhen Yitequ Technology Co., Ltd. Date: 2022/03/22

Shenzhen Yitequ Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A4HW-ET924 Date: 2022/03/22 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Weixian Ye Title: Manager