FCC ID: 2AVG9-TEC0X Cooling Magnetic Wireless Charger

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6786017.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case TECOl-8 20230722 100g 85x110 mm Cooling Magnetic Wireless Charger Product Diagram User Instruction 2. Attach clamp to car vent User Manual 1. Connect the air vent clamp to the device;

Step 1: Loose the nut to make the hook stretch out the right length

'a and place the hook clip on car's vent Wireless Charging Area TYPE-C Input 1

* Only fits for iPhone 12/13/14 series or smart phones with MagSafe cases. Note: For best perfonnance and safety, please read this manual carefully before using the product. Model: TEC01, TEC02 3. Connected Power To Charger 4.Charging your iPhone Please fit the product with the back of your iPhone, it will charge your iPhone automatically via the built-in magnetic wireless charging, Max to be lOW. Precautions Please carefully recommendations handle your charger and accessori use the warranty will help you effectively service. es, the following f,._,--

p \ ,.]! ,, \

;: ,II l that will corrode the circuit. minerals product as soon as possible stored due to emagnetization. is wet, please dry the the data or use a soft cloth to wipe it clean.losing If the equipment Please keep the equipment dry. Rain, moisture and various liquid may contain W hen charging, please select the regular 5V/2A, 9V/2A chargers. Do not use any damaged chargers. Please do not attempt to charge the equipment with exposed or case broken, and do not charge the equipment that are incompatible with this product. Do not store the equipment in a cold place. Otherwise, if temperature rises to normal temperatue, appliance. moisture will pent up inside it and damage the electric Do not attempt to open the equipment, or related will damage equipment modification unauthorized charging wireless dis-assembly functions. or Use the Type-C cable packed in the box to connect the device and the car charger. Tips:

W hen using this product, power. To achieve fast please make sure that the product is connected to the charging, QC2.0/3.0 car charger is required

l~

,\5

*Under normal charging Note:

l}

conditions, the charger and mobile phone could be slightly charging hot; the temperature

(such as playingvideo) may rise if the mobile phone is working while

*Please stop charging your phone when the charger is over-heating. Please try when over-heating. Our product will automatically it again when it's cooling down. stop charging Do not throw, tap or shake the equipment;

rough handling board and the mechanical structure of the equipment will damage the internal circuit Use the clean and moist soft cloth to clean the surface of the equipment. Do not use or store the equipment in dustyordlrty places. Some components adsorbed onto this product. other items with magnetic due to demagnetization. of this product are magnetic and metal materials may be Please do not use bank cards, credit cards or any near the product so as to avoid losing the data stored 4 5 6 7 nut 1.Unscrew 2.Place nut around ball head, insert into socket 3.Tighten nut clockwise Step2: Tighten balde until the grip securely locks onto your car's vent the nut so that the hook retracts to catch the vent 2 3 Specifications:

Input 5V/3A, 9V/2.22A Wireless Output

(SW), (7.5W), (lOW) Fits Below Supports (Not Included) Charging Efficiency ;;,.so%

Ball Diameter: 16.80.3mm Product Size

(2l 58.5'43.8 mm In the box:

;)];';;,:y

User manual Xl Charger Xl AirVentClamp Xl USB-Atolype-C Cable Xl

(("'HS Made in China FCC Statement with Part 15 of the FCC Rules. Operation is subject lo the two conditions:

This device complies following

(l)This

(2)This may cause undesired 2. Changes or modifications compliance Note:This digital provide dev,ce,pursuanl protection reasonable equipment device may not cause harmful device must accept any interference operation. interference received, including interference that approved to operate could void the user's authority not expressly the equipment. by the party responsib le for has been tested and found to comply with the Iitsfor a class B lo Part 15 of the FCC Rules. These limits harmful interference against are designed lo in a residential installation generates uses and can radiate and used in accordance This equipmenf installed to radio communications.However,lhere in a particular or television the user is encouraged measures this equipmemt can be determined installation.if reception,which is no guarantee to try to correct does cause harmful by turning the interference radio frequence with the 1nslructions,may cause Iha! interference interference will not occur energy and,if not harmful to radio interference the equipment off and on, by one or more of 1he following or relocate Reorient Increase the separation Connect the equipment the receiving antenna between the equipment on a circuit into an autlet and receiver different from that to which the receiver is connected. Consult the dealer o an experienced radio/TV technician for help. The device has been evaluated to meet requirement,This equipment should be install minumum distance of 20 cm between the radiator and y general RF exposure ed and operated with a our body.

Model:TECO1 f m FCC ID:2AVG9-TECOX ia i TECO1LF IQR (Top of lower cover) 2.40mm 2.99mm 10.55mm. 16.99 mm. a WUUUUM TECO1F 2/88 (Bottom of lower cover) ER TYPE C OBA F Note that the TYPE C port faces down

Shenzhen Yostand Technology Co., Ltd. 2023-08-31 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize DongGuan Anci Electronic Technology Co., Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Joy Zhang Vice President Shenzhen Yostand Technology Co., Ltd. Room 701, Building 1, Jiuzhou Industrial Park, No.10, 19th Tongguan Road, Tianliao Community, Yutang Street,Guangming District, Shenzhen, Guangdong, China

Shenzhen Yostand Technology Co., Ltd. 2023-08-31 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2AVG9-TEC0X)

[Shenzhen Yostand Technology Co., Ltd.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Joy Zhang Vice President Shenzhen Yostand Technology Co., Ltd. Room 701, Building 1, Jiuzhou Industrial Park, No.10, 19th Tongguan Road, Tianliao Community, Yutang Street,Guangming District, Shenzhen, Guangdong, China Shenzhen Yostand Technology Co., Ltd. 2023-08-31 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for(FCC ID: 2AVG9-TEC0X )

[Shenzhen Yostand Technology Co., Ltd. ] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Joy Zhang Vice President Shenzhen Yostand Technology Co., Ltd. Room 701, Building 1, Jiuzhou Industrial Park, No.10, 19th Tongguan Road, Tianliao Community, Yutang Street,Guangming District, Shenzhen, Guangdong, China

Discrepancy declaration Date:2023-08-31 Our company states that the main model of our products is TEC01, and TEC02 is series model. The series model is consistent with the main model in RF module,antenna, PCB layout, schematics and use of components, the main differences are the model name and appearance. In appearance, the TEC02 has one less plastic base compared to the TEC01, and the rest are the same. Sincerely, Signature:

Contact name: Joy Zhang Contact company:Shenzhen Yostand Technology Co., Ltd. Address:Room 701, Building 1, Jiuzhou Industrial Park, No.10, 19th Tongguan Road, Tianliao Community, Yutang Street,Guangming District, Shenzhen, Guangdong, China

Shenzhen Yostand Technology Co., Ltd. 2023-08-31 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (EUT Name: Cooling Magnetic Wireless Charger /Model: TEC01, TEC02 /FCC ID: 2AVG9-TEC0X) To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Block Diagram ,Operational Description,Schematics ) required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Joy Zhang Vice President Shenzhen Yostand Technology Co., Ltd. Room 701, Building 1, Jiuzhou Industrial Park, No.10, 19th Tongguan Road, Tianliao Community, Yutang Street,Guangming District, Shenzhen, Guangdong, China

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6786009.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Attestation Statements

(2023-9-1) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for (FCC ID: 2AVG9-TECOX Grantee FRN: 0029070554)

(Shenzhen Yostand Technology Co., Ltd.), the undersigned, hereby authorize (Lucky Cowboy Global Services, LLC) to act as our designated U.S. agent for service of process,( Shenzhen Yostand Technology Co., Ltd.) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment.

(Lucky Cowboy Global Services, LLC) accepts the responsibility to act as designated U.S. agent for service of process. Applicant Information Company name: Shenzhen Yostand Technology Co., Ltd. Contact Name: Joy Zhang Address: Room 701, Building 1, Jiuzhou Industrial Park, No.10, 19th Tongguan Road, Tianliao Community,Yutang Street, Guangming District, ShenzhenGuangdong, China Telephone No: +86755 23693752 Email: zy@esorun.com Signature

[Joy Zhang]

U.S. Agent Information:

Company Name: Lucky Cowboy Global Services, LLC Address: 2213 S. Braeswood Blvd. #12E Houston, TX 77030 USA FRN: 0033510934 Contact Name: Louie Liu Telephone No: +1 (713) 992-3369 Email: info@luckycowboyglobalservices.com Signature

[Louie Liu]

Shenzhen Yostand Technology Co., Ltd. 2023/07/18 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: 2AVG9-TEC0X To Whom It May Concern:

This letter is to ascertain that, Product: TEC01 has been the units used for conducting FCC compliance testing, and it meets 680106 D01 RF Exposure Wireless Charging App v03 Clause 5(b) all 6 conditions. Power transfer frequency is less that 1 MHz 1 Reply Yes, Power transfer frequency is less that 1 MHz ;

2 Reply Yes, Output power from each primary coil is less than or equal to 15 watts. Output power from each primary coil is less than or equal to 15 watts. 3 The max output power is 10W. The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. Reply No, EUT has only one coil. 4 Reply Yes, The client device needs to be in contact with the transmitter base, and Client device is placed directly in contact with the transmitter. 5 the contact distance is less than 10mm. Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). Reply Yes, EUT is mobile device 6 The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Reply Yes, RF Exposure Evaluation report test result meets this Limt.Please refer to the RF exposure Evaluation report. If you have any question or concerns, pls. contact us. Sincerely, Joy Zhang Manager Shenzhen Yostand Technology Co., Ltd. Room 701, Building 1, Jiuzhou Industrial Park, No.10, 19th Tongguan Road, Tianliao Community, Yutang Street,Guangming District, Shenzhen, Guangdong, China