FCC ID: 2A3DP-W225 3-IN-1 Wireless Charging Station

3 IN 1 Fast Wireless Charger User manual English operation may damage he electronic components on the main board of the wireless charger or shorten the service life. A It is strongly recommended to use DC adapter power supply with output voltage and current of 5V3A, 9V2.5A and 12V2A to power this product. If the DC adapter higher than 12V3A is used for a long time to supply power to the wireless charger, the operating temperature may be overheated or the service life of the product may be shortened. This product can charge any mobile phone with wireless charging function, such as Apple phone/Android phone/Apple headset/Apple watch. Including but not limited to the following device list:

- Samsung Galaxy $10/S10Plus/S10e/ Note 10S7/S7 Edge

- Samsung GalaxyS8/S8Plus/Note8- Samsung Galaxy Z Fold35G

- Galaxy Z Flip35G/ Galaxy S21/S21+5G

- Huawei Mate Series P Series Nova Series

- iPhone 11/11 pro /11 ProMax / XS / XS Max/ XR/ X/8/8Plus

- More smart phones compatible with QI wireless charge.

- Apple Air-pods 2/ Air-pods 3/ Air Pods-Pro.

- Apple Watch series. Not available for Android watch series Please note that:

1.The Watch Wireless Charging Area supports Apple Watch only. Android watches not available. 2. Please remove your phone case before charging if the thickness >Smm. 3.It is recommended to use certified QC 3.0 adapter to power this product. 4.When this product is used to charge the mobile phone/watch/Apple headset at the same time or if you want to charge the mobile phone quickly, you need to use the QC3.0 charging adapter. 5.Make sure to disconnect the device from power when cleaning. Product Specifi Product Name: 3-IN-1 Wir Model: YNW225 Product Color: Black/White/Grey tior:

s Charger Product Material: Engineering plastics (ABS). Product Weight 160g Output for Mobile Phone: 5W /7.5W/ 10W/ 15W Output for Watch: 2-3W Output for Air pods: 5W Power input: 5V 3A/ 9V 2.5A/12V 2A USB-Type C cable length: Around 1.0M Packing List for YNW225V1: Wireless charger *1,power cord 1, instruction *1, USB-Type C cable for 1 meter Packing List for YNW225V2: Wireless charger *1,QC3.0 DC Adaptor, power cord *1,instruction *1,USB-Type C cable for 1 meter Please read the important safety statement before using this device !

=Do not store the equipment in a high temperature environment, including strong sunlight or other forms of heat. Do not place the equipment in fire or other overheated environment. This product may be damaged and personal injury may be caused by baking or temperature higher than 212 F (100 C).

*Do not use DC power supply exceeding 12V 3A to power this product.

*Do not expose the wireless charger to rain and snow.

+Non-professional personnel shouldn't repair, modify or disassemble this product. If you have any questions, please contact the manufacturer.

+When the wireless charger is connected to the power supply, place themobile phone in the charging area for charging for less than one second, then quickly remove the mobile phone, then quickly place the mobile phone in the charging area and then quickly remove the mobile phone. Such repeated and quickly 6.It is normal and safe to hear a humming noise when very close to the charger It means that this wireless charger is adjusting its temperature to achieve a more efficient charging speed 7.|f your device cannot be charged to 100%, it may be due to high ambient temperature. It is recommended to charge your device at normal temperature. This product has automatic temperature control function, which can protect your device during charging. Charging operation instructions Step1:Plug the Type-C into the wireless charger interface and USB interface into the DC adaptor. These three indicators corresponding to the mobile phone/watch/

headset are all green. If the mobile phone/watch/headset is not placed in the charging position, the indicator light will go off after 5 seconds. Step2:Put the mobile phone/APPLE Watch/AIR-Pods on the corresponding charging area, and the corresponding indicators green light will light up, indicating that the wireless charger is charging the corresponding device, and these charging indicator light will go out after 5 seconds. Q&A If the indicator does not flash after the phone or watch is placed in the charging area, and the phone or watch does not display charging, please follow the steps below. 1.First, please confirm whether your mobile phone/watch/headset has wireless charging function. Confirm whether the Power supply adapter can output V3A or 9V1.5-2.5A or 12V/1.5A, otherwise the Power supply needs to be replaced with QC3.0 power adapter 2.Check whether the USB-Type-C power cord is damaged. Test with other USB cables, if it is damaged, replace the power Cable. 3.Check whether the protective cover of mobile phone/watch/headset has metal objects. If yes, please remove the protective cover and then Put it in the charging area again for charging. W225 Wireless Charging Station Wireless Charging Station 1.875A Please Note:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits

{for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ina particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different rom that to which the receiver is connected.

= Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement FCC ID: 2430P-W225

Shenzhen Chenxing Electronic Technology Co,Ltd. PRODUCT SPECIFICATION FOR APPROVAL CUSTOMER Weigaoyu PRODUCT NAME Power Transmitter for Apple Watch PART No. PRODUCT SPEC DATE VERSION Inductance Spec: 7.7uH10%

Shielding spec: KP24.5*2.6mm soft shielding with rubber Silk covered wire spec: 2 UEW/155 0.08*24*13Ts Segment Length: 9mm Double side Type: 3M 9448A Magnet Spec: 7.8*2mm Electroplating with Zinc April 12, 2023 REV1.0 Revision REV 1.0 Modified Content first release Principle Xue Lei Date Note 2023-04-12 PREPARED BY CHECKED BY APPROVED BY Authorized signature &

company chop Company Name: Shenzhen Chenxing Electronic Technology Co., Ltd Factory address: 5th floor, Building 1, Xinkecheng Science and Technology Industrial Park, No. 51 Dabao Road, Xin'an Street, Bao'an District, Shenzhen 1 Shenzhen Chenxing Electronic Technology Co,Ltd. Product size SPECIFICATION Shielding Outer Diameter Max (A) Shielding Thickness (B) Shielding Outer Diameter Min (C) Shielding Inner Diameter(D) Inner Hole Outer Diameter(E) Shielding Cylinder Height (F) Inner Hole Inner Diameter (H) Pin Length (I) 250.5mm 2.60.2mm 23.70.4mm 210.5mm 13.5 0.2mm 2.3 0.25mm 7.70.4mm 3.00.2mm Segment Length (J) Magnet Spec Adhesive Tape 9mm 2mm 7.8*2.00.1mm 3M 9448A Company Name: Shenzhen Chenxing Electronic Technology Co., Ltd Factory address: 5th floor, Building 1, Xinkecheng Science and Technology Industrial Park, No. 51 Dabao Road, Xin'an Street, Bao'an District, Shenzhen 2 Shenzhen Chenxing Electronic Technology Co,Ltd. schematic diagram Winding parameters TERMINAL WIRE Turns Winding Direction silk covered wire S F 0.08*24P 13Ts CCW Electrical characteristics ITEM TEMPERATURE:2510C, TERMINAL SPECIFICATION RELATIVE HUMIDITY:6520%

TEST FREQUENCY TEST EQUIPMENTS IND. S-F 7.7uH10%

100KHz/1.0V LCZ METER 1062B Company Name: Shenzhen Chenxing Electronic Technology Co., Ltd Factory address: 5th floor, Building 1, Xinkecheng Science and Technology Industrial Park, No. 51 Dabao Road, Xin'an Street, Bao'an District, Shenzhen 3

Shenzhen Younuo Intelligent Electronic Technology Co., Ltd DateAug. 21, 2023 Product Model Number: 3-IN-1 Wireless Charging Station FCC ID2A3DP-W225 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:

Testing Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By:

Contact Listed on FCC Wesbite Title: Manager Email: pengdawood@163.com Telephone: +86 13923738053 On behalf of: Shenzhen Younuo Intelligent Electronic Technology Co., Ltd Effective Date: April 2, 2020 Revision Date:

QSF 7.6.4-8 Agent Authorization Letter Template Revision: 0 Page 1 of 1

Shenzhen Younuo Intelligent Electronic Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A3DP-W225 To Whom It May Concern, Date: August 21, 2023 Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: ZhenJun Pi Title: Manager

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6755264.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case US Age ent for Se ervice of P Process L LETTER OF F ATTEST TATION TO:

Office Feder 7435 Colum e of Enginee ral Commun 5 Oakland Mi mbia, MD 21 1046 ering Techno ications Com lls Road ology mmission US A Agent for Se ervice of Pr rocess:

Comp FRN:0 Addre Telep Email EIN:9 pany Name:

0033489683 ess: 1312 17 phone No: (9 l:market@clf 98-1720547 CLF Import a and Export L Limited 7th Street #6 949) 254-256 fimportexpor 692Denver 65 rt.com r, CO 80202, United State es This l a loca letter is to co al representa onfirm that t ative on beha the US Agent alf ofShenzhe t for Service en Younuo In of Process a ntelligent Ele accepts resp ectronic Tech onsibility to hnology Co., act as Ltd. The U outlin 2.9 US Agent fo ned in the FC 11. r Service of CC Equipmen Process is a nt Authorizat aware of and tion Program d agrees to c

, Report and comply with d Order FCC the require 22-84, and c ments clause Appl Comp Produ Grant FCC I Conta Addre Shenz Telep Email icant:

pany name:S uct Descriptio tee code:2A3 ID:2A3DP-W act Name:Zh ess: 2/F, Bui zhen Guang phone No: +8 l:pengdawoo Shenzhen Yo on: 3-IN-1 W 3DP W225 henJun Pi lding, NO.20 Dong 8613923738 m od@163.com 053 unuo Intellig Wireless Char gent Electron rging Station nic Technolog gy Co., Ltd 070JinCheng Road, Ho Yi Community,

, Shajing Tow wn baoan Di strict, The A Equip Applicant is pment Autho aware of a rization Prog nd agrees to gram, Report o comply w t and Order F ith the requ FCC 22-84, a uirements ou and clause utlined in the 2.911. e FCC This Agreement t is valid un ntil (Perman nently valid d). Date Appl e: 2023/08/

icants Nam

/21 me:ZhenJun Pi US Ag gent for Se rvice of Pro ocesss Nam me:

Title Signa

:Project Ma ature anager Title:

Signa ature 1/1

Shenzhen Younuo Intelligent Electronic Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-8-21 FCC ID: 2A3DP-W225 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing Shenzhen Younuo Intelligent Electronic Technology Co., Ltd certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing Shenzhen Younuo Intelligent Electronic Technology Co., Ltd certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Applicant: Shenzhen Younuo Intelligent Electronic Technology Co., Ltd Address: 2/F, Building, NO.2070JinCheng Road, Ho Yi Community, Shajing Town baoan District, Shenzhen Guang Dong Contact Person: Zhenjun Pi Tel.: +86 13923738053 Email: pengdawood@163.com Sincerely, Signature: