FCC ID: 2AKM6-T5 Smart Watch

FCC Caution. two conditions:

This device complies with part 15 of the FCC Rules. Operation is subject to the following

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver measures:

is connected.

-Consult the dealer or an experienced radio/TV technician for help. This Smart Phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. Thestandards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue for front of face and 4.0 W/kg averaged over 10 gram of tissue for wrist. Device types: T5 (FCC ID: 2AKM6-T5) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for Front of face is 1.383W/kg(separation distance is 10mm) and when properly worn on the Wrist is 2.035W/kg(separation distance is 0mm). The use of belt clips, holsters and similar accessories should not contain metallic components 25 in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

FCC Label W: 6mm Smart Watch L Model name: T5 FCC ID: 2AKM6-T5 L: 10mm Note:The label is silk-screen on the sample L

Shenzhen YQT Electronic Technology Co.,Ltd Agent Authorization Company: Shenzhen YQT Electronic Technology Co.,Ltd Address: F5, Bldg4, Hua Feng No.1 Science & Technology Zone, Xixiang, Bao'an, Shenzhen, China Product Name: Smart Watch Model Number(s): T5, Q1, Q2, Q5, Q6, Q6S, Q7S, Q9, Q11, Q11S, Q11CW, Q12, Q12G, Q12B, Q12CW, Q12W, Q12T, Q13, Q13W, Q15, Q15F, Q16, Q17, Q18, Q18F, Q19, Q19F, Q19CW, Q19-XZ6, Q19-360, Q20, Q21, Q22, Q23, Q25, Q26, Q27, Q28, Q29, Q30, Q31, Q50, Q523, Q523-1.22, Q528, Q529, Q750, Q610S, Q60, Q60S, Q49, Q68, Q72, Q86, T3, T5S, T6, T8, T8W, T8L, T10, T10S, T10-360, T11, T12, T13, T15, T16, T17, T18, T19, T20, T27,T28, T29, T30, T31, T32, T33, T35, T36, W02S, A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, Q13Z, Z1, S20 Product Description: Smart Watch FCC ID: 2AKM6-T5 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Chen ka man Title:

Manager Company: Shenzhen YQT Electronic Technology Co.,Ltd Date: 2021.01.12

Shenzhen YQT Electronic Technology Co.,Ltd Authorization Letter We,

(the approval holder) Company name Addresss Shenzhen YQT Electronic Technology Co.,Ltd F5, Bldg4, Hua Feng No.1 Science & Technology Zone, Xixiang, Bao'an, Shenzhen, China declare that the following representative (agent):

Name (person) Bovey Yang Company name Shenzhen STS Test Services Co., Ltd. Addresss 1/F., Building B, Zhuoke Science Park, No.190,Chongqing Road, Fuyong Street, Baoan District, Shenzhen, Guangdong,China City Shenzhen China Country to act on our behalf on all matters concerning the application and documents submitted to Nemko for product certification below Product Description Smart Watch Type or Model(s) T5, Q1, Q2, Q5, Q6, Q6S, Q7S, Q9, Q11, Q11S, Q11CW, Q12, Q12G, Q12B, Q12CW, Q12W, Q12T, Q13, Q13W, Q15, Q15F, Q16, Q17, Q18, Q18F, Q19, Q19F, Q19CW, Q19-XZ6, Q19-360, Q20, Q21, Q22, Q23, Q25, Q26, Q27, Q28, Q29, Q30, Q31, Q50, Q523, Q523-1.22, Q528, Q529, Q750, Q610S, Q60, Q60S, Q49, Q68, Q72, Q86, T3, T5S, T6, T8, T8W, T8L, T10, T10S, T10-360, T11, T12, T13, T15, T16, T17, T18, T19, T20, T27,T28, T29, T30, T31, T32, T33, T35, T36, W02S, A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, Q13Z, Z1, S20 Brand Name YQT 2AKM6-T5 FCC ID Attestation:

Country:

Date:

Name:

(this must be a person) Function:

Signature:

(or official company stamp) China 2021/01/12 Chen ka man Manager

Shenzhen YQT Electronic Technology Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021.01.18 Subject; Request for Confidentiality FCC ID: 2AKM6-T5 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Tune-up Procedure Part List External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Chen ka man Title: Manager

Differences Description We Shenzhen YQT Electronic Technology Co.,Ltd state:

Product Smart Watch Model Name T5, Q1, Q2, Q5, Q6, Q6S, Q7S, Q9, Q11, Q11S, Q11CW, Q12, Q12G, Q12B, Q12CW, Q12W, Q12T, Q13, Q13W, Q15, Q15F, Q16, Q17, Q18, Q18F, Q19, Q19F, Q19CW, Q19-XZ6, Q19-360, Q20, Q21, Q22, Q23, Q25, Q26, Q27, Q28, Q29, Q30, Q31, Q50, Q523, Q523-1.22, Q528, Q529, Q750, Q610S, Q60, Q60S, Q49, Q68, Q72, Q86, T3, T5S, T6, T8, T8W, T8L, T10, T10S, T10-360, T11, T12, T13, T15, T16, T17, T18, T19, T20, T27,T28, T29, T30, T31, T32, T33, T35, T36, W02S, A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, Q13Z, Z1, S20 Trade Name: YQT FCC ID: 2AKM6-T5 The electrical circuit design, layout, components used and internal wiring for above models are identical, Only difference in model names and appearance. Signatory Date 2021.01.12 Signature Name: Chen ka man Title: Manager Company: Shenzhen YQT Electronic Technology Co.,Ltd Address: F5, Bldg4, Hua Feng No.1 Science & Technology Zone, Xixiang, Bao'an, Shenzhen, China