User Manual Important Safety Tips This product is recommended for use by persons over 12 years of age. This product is for indoor use only, do not place in direct sunlight area. It is recommended to be placed in a dry and ventilated place at room temperature. Before charging, please keep the charger dry/please make sure the charger is dry. If there are water drops, please dry with a soft cloth. Please wipe the charger regularly with a dry cloth to prevent stain deposits. This product is a dedicated charger for the Y2087 and is only recommended for use on theY2087. Oclean will not responsible for any consequences if used on third party products. Toothbrush Charging Instruction Before charging, please dry the toothbrush and place it on the wireless charger first. Then place this charger on a smooth surface. Finally connect the USB plug to the USB cable of the charger. You can judge the charging status by the indicator light on the wireless charger. /Charging status can be judged by th eindicator light on the wireless charger. The indicator light on the base will flash when power is on. Place the bottom of the toothbrush on the indication area on the wireless charger, if it is not charging, the indicator light will not turn on. When there is a foreign object on the wireless charger or when charging is not normal, the indicator light will flash rapidly. When charging is normal, the indicator light will turn on like a breathing display. The wireless charger can fully charge the toothbrush in about 3.5 hours under normal conditions, and you can judge the power level by the battery ratio shown on the Oclean electric toothbrush display. Attention Placement and Use of The Wireless Charging Base When placing the wireless charger, be sure to place it face up and place the toothbrush within the indicated circle of the wireless charging base. When using the wireless charger, make sure that the charging base is free of metallic foreign objects and that the charger is dry. Lay flat when charging, please do not place metal other than toothbrush on the charging base. Please do not place the toothbrush on the wireless charger for a long time to charge repeatedly. After fully charged, please remove the toothbrush from the wireless charging base in time, and please charge it when the toothbrush reminds you that the power is low/when the toothbrush indicates low power status. If you need more detailed information on the use of the product, you can follow Oclean public number. Thank you very much for using Oclean Wireless Charger. Instruction for Use First Time Use Please install the silicone cover for the charging stand on the surface of the wireless charger and plug the USB cable of the charging stand into the USB jack of the charger or electronic device. Just place the Y2087 in the slot in the middle of the silicone sleeve and the handle shows charging. 1. Do not disassemble, hit, squeeze or put into the fire 2. Do not place in high temperature environment 3. Prohibit the use of the product after immersion in water 4. Prohibit the placement of any metal outside the toothbrush on the charger 5. If the product is overheated when charging, please immediately unplug the power and stop using Important Tips for Charging This product uses wireless charging mechanism, it is recommended to place this product on the wireless charger only when charging is required/needed. When charging is not required/needed, please place the toothbrush elsewhere. (As shown in the picture) Placing the toothbrush on the energized wireless charging base for a long time may lead to premature decay of the built-in battery and affect the usage experience. Clean The Charger Before cleaning the charger, be sure to unplug it from the outlet and it is recommended to use a dry soft cloth to wipe the surface of the wireless charger. After cleaning, you need to/please wait until the charger is thoroughly dry before putting it into use. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. The instructions for class III appliances shall state that it must only be supplied at safety Extra low voltage corresponding to the marking on the appliance. Product Specifications Product Name: Wireless Charger Model: WP01 Output Power: 1.5W Input: 5V/1A Work temperature-20-40 EU Regulatory Hereby, Shenzhen Yunding Information Technology Co., Ltd. declares that this device WP01 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10),This product is allowed to be used in all EU member states. Frequency Bands and Power Frequency bands 110-205kHz. Maximum radio-frequency power transmitted in the frequency bands in which the radio equipment operates: The maximum power for all bands is less than the highest limit value specified in the related Harmonized Standard. The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows : 61.42dBuA /m at 3 m. FCC Statement This equipment has been tested and found to comply with the limits for a WPC device, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. CAUTION: Changes or modifications not expressly approvedby the party responsible for compliance could void the users authority to operate the product. NOTE: This equipment has been tested and found to comply with the limits for a wireless power charger, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 15cm between the radiator and your body The device has been evaluated to meet general RF exposure requirement. IC Statement This device complies with (s)/receiver(s) that comply with Innovation, Science and Economic Development Canada'slicence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage;
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. CAN ICES-001(B) / NMB-001(B)