FCC ID: 2ANMU-C35SPUT Smart Phone

C35 Manufacturer Address:202, Building A2, Silicon Valley Power Intelligent Terminal Industrial Park, No. 20, Dafu Industrial Zone, Kukeng Community, Guanlan Street, Longhua District, ShenzhenChina Light Sensing+

Distance Sensing Quick Charger TYPE-C SIM card pin C35 horn hole MIC hole ash cato Sub camera Power key Fingerprint Scanner FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. FCC/IC RF Radiation Exposure and SAR Statements The Smart Phone C35 has been tested for body-worn Specific Absorption Rate(SAR) compliance. The FCC/IC has established detailed SAR requirements and has established that these requirements. RF Exposure Information The radio module has been evaluated under FCC Bulletin C95.1 and IEEE 1528 and found to be compliant to RF Exposure from radio frequency devices. This model meets the applicable government requirements for exposure to radio frequency waves. The highest reported SAR level for usage near the body

(10mm) is 0.714 W/kg, Body simultaneous transmission is 1.125W/kg at the same time.SAR level for usage near the Head is 1.125 W/kg and Head simultaneous transmission is 1.514 W/kg SAR level for usage near the Hotspot is 0.714 W/kg and Hotspot simultaneous transmission is 1.125 W/kg

Label location Size:40*20mm Smart Phone FCC ID: 2ANMU-C35SPUT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD FCC Software Configuration Control Declaration Date: August 28, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Smart Phone / C35 , C35 S, C35 Pro, C35 Ultra Regarding FCC Country Code Selection guidelines identified in KDB 594280 D01 Software Configuration Control v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Gaolei Yan Date: 2023/8/28 Title: Manager Signatureof applicant FCC Software Configuration Control Declaration Rev1.1

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD U.S. Agent Designation for Service of Process

(Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA ATTENTION: FCC Certification Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Baihetian Innovative Solutions FRN: 0033401605 Contact Name: Kenneth Young Street Address: 6837 Chase Rd City/Province/Zip: Dearborn, MI 48126 Telephone No: 313-395-3113 Email: ken.young@baihetiansolutions.com This letter is to confirm that we (the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature:

Date: 2023-08-22 Signed by (Printed Name/Title):

The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Grantee Code: 2ANMU FCC ID : 2ANMU-C35SPUT Contact Name: Gaolei Yan Street Address: A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA SHENZHEN China Telephone No: 0755-61156588 Email: okygl2011@163.com Applicant Signature:

Date: 2023-08-22 Signed by (Printed Name/Title): Gaolei Yan /Manager

Report NoBCTC2307919155E Tune up procedure Tune up procedure shall be over the power range or at specific operating power levels. 1. It must provide an operational voltage to turn on the device and on one certain channel in service mode by means of company proprietary software. 2. Base station simulator (CMW500) measures the Mobile phone device specific RF characteristics. 3. The maximum gains of each individual device are adjusted until the target value met. Mode GSM GPRS 850 1Txslot GPRS 850 2Txslots GPRS 850 3Txslots GPRS 850 4Txslots EGPRS 850 1Txslot EGPRS 850 2Txslots EGPRS 850 3Txslots EGPRS 850 4Txslots Tuneup Power GSM 850 32.0 dBm1.0 32.0 dBm1.0 30.0 dBm1.0 27.5 dBm1.0 25.5 dBm1.0 32.0 dBm1.0 30.0 dBm1.0 27.5 dBm1.0 25.5 dBm1.0 Tuneup Power GSM 1900 29.0 dBm1.0 29.0 dBm1.0 26.5 dBm1.0 24.5 dBm1.0 22.5 dBm1.0 24.5 dBm1.0 22.5 dBm1.0 20.5 dBm1.0 18.5 dBm1.0 Mode RMC 12.2kbps HSDPA HSUPA WCDMA Band II WCDMA Band IV WCDMA Band V 22.0dBm 1.0 21.5dBm 1.0 21.5dBm 1.0 22.0dBm 1.0 22.0dBm 1.0 22.0dBm 1.0 22.0dBm 1.0 22.0dBm 1.0 22.0dBm 1.0 Mode QPSK 16QAM Mode QPSK 16QAM Tuneup Power LTE Band 2 23.0dBm 1.0 23.0dBm 1.0 LTE Band 4 23.0dBm 1.0 23.0dBm 1.0 LTE Band 5 23.0dBm 1.0 23.0dBm 1.0 Tuneup Power LTE Band 7 22.5dBm 1.0 22.5dBm 1.0 LTE Band 12 23.5dBm 1.0 23.5dBm 1.0 LTE Band 17 23.5dBm 1.0 23.5dBm 1.0 Report NoBCTC2307919155E Tuneup Power 802.11b 802.11g 802.11n(HT20) 802.11n(HT40) 802.11a 802.11n(HT20) 802.11n(HT40) 802.11ac(HT20) 802.11ac(HT40) 802.11ac(HT80) 802.11a 802.11n(HT20) 802.11n(HT40) 802.11ac(HT20) 802.11ac(HT40) 802.11ac(HT80) GFSK Pi/4QPSK 8DPSK GFSK 13.0 dBm1.0 11.0 dBm1.0 10.0 dBm1.0 9.5 dBm1.0 10.0 dBm1.0 8.5 dBm1.0 7.5 dBm1.0 8.5 dBm1.0 7.5 dBm1.0 7.0 dBm1.0 10.5 dBm1.0 9.0 dBm1.0 8.0 dBm1.0 9.0 dBm1.0 8.5 dBm1.0 7.0 dBm1.0

-2.0 dBm1.0

-0.5 dBm1.0

-0.5 dBm1.0

-1.5 dBm1.0 WLAN 2.4G WLAN 5.1G WLAN 5.8G Bluetooth BLE(1M) Then these appropriate gain settings are stored in each device individually. The user has no possibility to change these settings later on, and during manufacturing each device will be individual calibrated. The measurement is done in fully calibrated setup, which is based on a CMW500 base station simulator. Furthermore, the highest power level is verified afterwards in a call measurement on three channels (low, middle and high).