FCC ID: 2ANMU-WP33PRO Smart Phone

202, Building A2, Silicon Valley Power Intelligent Terminal Industrial Park, No. 20, Dafu Industrial Zone, Kukeng Community, Guanlan Street, Longhua District, Shenzhen China WP33 Pro WP33 Pro Contents English German Franais Italiano Espaol 01 10 17 24 31 38 45 52 Vent holes Receiver Light sensor Front camera Touch screen MIC Type-c WP33 Pro 22000 33 Rear main camera night vision camera Speaker sound hole SIM card flash Custom Key night vision light Volume +

Volume -

Macro camera Power button +

fingerprint This device complies with part 15 of the FCC Rules . Operation is subject to the condition that this desvice does not cause harmful interferene Any changes or modifications not expressly approved by the party responsible for compliance could void the uers authority to operate the equipment. NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to Part 15 of the FCC Rules . These limits are designed to provide reasonable protection against harmful interference in a residential installation . This equipment generates , uses and can radiate radio frequency energy and , if not installed and used in accordance with the instructions , may cause harmful interference to radio communications . However , there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct the interference by one or more of the following measures:

FCC ID : 2ANMU-WP33PRO Entlftungslcher Empfnger Lichtsensor Vordere Kamera Berhrungssensitiver Bildschirm MIC Typ-c 10 WP33 Pro 22000 33 11 Rckseite Hauptkamera Nachtsichtkamera Lautsprecher Schallloch SIM Karte Blitz Benutzerdefinierter Schlssel Nachtsichtlicht Lautstrke +

Lautstrke -

Makrokamera Ein-/Aus-Taste +

Fingerabdruck 12 EN62209-1:2016 ; EN 62209-2:2010 ; EN 62479:2010;

EN 50360:2017:EN 50566:2017;

14

17 WP33 Pro 22000 33 18

19 EN62209-1:2016 ; EN 62209-2:2010 ; EN 62479:2010;

EN 50360:2017:EN 50566:2017;

21 Trous d'aration Capteur de l umire Camra frontale Destinataire cran tactile micro Type-c 24 WP33 Pro 22000 33 25 Arrire camra principale camra de vision nocturne trou sonore du haut-parleur Carte SIM Flash Cl personnalise lumire de vision nocturne Volume +

Volume +

Camra macro Bouton d'alimentation +

empreinte digitale 26

EN62209-1:2016 ; EN 62209-2:2010 ; EN 62479:2010;

EN 50360:2017:EN 50566:2017;

28 c 31 C WP33 Pro 22000 33 32 SIM

33 EN62209-1:2016 ; EN 62209-2:2010 ; EN 62479:2010;

EN 50360:2017:EN 50566:2017;

35 Fori di sfiato Ricevitore Sensore di luce Fotocamera frontale Touch screen MIC Tipo-c 38 WP33 Pro 22000 33 39 Parte posteriore fotocamera principale telecamera per la visione notturna buca dell'

altoparlante Carta SIM Flash Chiave personalizzata luce per la visione notturna Volume -

Fotocamera macro Pulsante di accensione +

impronta digitale 40 EN62209-1:2016 ; EN 62209-2:2010 ; EN 62479:2010;

EN 50360:2017:EN 50566:2017;

42 Agujeros de ventilacin Receptor Sensor de luz Cmara frontal Pantalla tctil MICRFONO Tipo-c 45 WP33 Pro 22000 33 46 Trasero cmara principal cmara de visin nocturna orificio de sonido del altavoz Tarjeta SIM Flash Clave personalizada luz de visin nocturna Volumen +

Volumen -

Cmara macrotello Botn de encendido +

huella dactilar 47 EN62209-1:2016 ; EN 62209-2:2010 ; EN 62479:2010;

EN 50360:2017:EN 50566:2017;

49 52 WP33 Pro 22000 33 53

54 EN62209-1:2016 ; EN 62209-2:2010 ; EN 62479:2010;

EN 50360:2017:EN 50566:2017;

56 CE Warning 1.Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 2.Adapter shall be installed near the equipment and shall be easily accessible. 3.The operating temperature of the EUT cant exceed 25 and shouldnt be lower than 0. 4.The plug considered as disconnect device of adapter. 5.The device complies with RF specifications when the device used at 20cm from your body. 6.The product shall be connected to a Type C interface/ USB interface of version USB2.0 or higher. 7.The band 5150-5350MHz indoor use only. Hereby, SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD declares that this product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU. This product is allowed to be used in all EU member states. Frequency band Max. output power(dBm) BLE EDR WiFi 5G WiFi GSM 900 DCS 1800

-2.09 (EIRP)

-0.18 (EIRP) 13.28 (EIRP) 14.28 (EIRP) 32.92 (conducted) 29.80 (conducted) WCDMA Band I 22.88 (conducted) WCDMA Band VIII 23.08 (conducted) LTE Band 1 LTE Band 3 LTE Band 7 LTE Band 8 LTE Band 20 LTE Band 28 LTE Band 34 LTE Band 38 LTE Band 40 5G NR N1 5G NR N3 NFC 22.08 (conducted) 21.15 (conducted) 21.81 (conducted) 22.08 (conducted) 21.62 (conducted) 24.84(conducted) 23.29(conducted) 22.41(conducted) 21.54 (conducted) 22.11(conducted) 22.69(conducted)

-52.51 dBuA/m@10m FCC Warning 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Absorption Rate (SAR) information:

This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This device was tested for typical body-worn operations with the back of the device kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a appropriate separation distance between the user's body and the back of the device. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Use only the supplied or an approved antenna.

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO., LTD

(2023-12-26) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize (BTF Testing Lab (Shenzhen) Co., Ltd. ) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Printed Name of Authorized Applicant Contact: ___ Gaolei Yan _________________________________ Signature of Authorized Applicant Contact:

____ Title of Authorized Applicant Contact:

__ Manager __________________________________ Date:

___ 2023-12.26_______________________________

(SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD)

(2023-12-26) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2ANMU-WP33PRO)

[SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD ] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

(Applicant signature)

(Applicant printed name) Gaolei Yan

(SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD)

(2023-12-26) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID:2ANMU-WP33PRO)

[SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD ] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely,

(Applicant signature)

(Applicant printed name) Gaolei Yan

SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD

(2023-12-26) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Smart Phone / WP33 Pro, WP33, WP33 S, SP33 Ultra, WP33 TITAN AND 2ANMU-WP33PRO) To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Schematic Diagram Block Diagram/BOM/Operational Description/software security requirement/ tune up procedure ) required to be submitted with this application be permanently withheld from public review. SPECIFY REASON FOR REQUEST (i.e. the above documents are company proprietary information that could never get into the possession of your competition). Please contact me if there is any information you may need. Sincerely, Printed Name of Authorized Applicant Contact: ___ Gaolei Yan _________________________________ Signature of Authorized Applicant Contact:

____ Title of Authorized Applicant Contact:

__ Manager __________________________________ Date:

___ 2023-12.26_______________________________

(SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD) U.S. Agent Designation for Service of Process

(Applicant and U.S. Agent are Separate Parties) TO:

Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Baihetian Innovative Solutions FRN: 0033401605 Contact Name: Kenneth Young Street Address: 6837 Chase Rd City/Province/Zip: Dearborn, MI 48126 Telephone No: 313-395-3113 Email: ken.young@baihetiansolutions.com This letter is to confirm that we (the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature:

Date: Feb 20, 2023 Signed by (Printed Name/Title): Kenneth Young/ Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD Grantee Code: 2ANMU Contact Name: Gaolei Yan Street Address: A2 2F BUILDING ENET NEW INDUSTRIAL PARK, DAFU INDUSTRIAL ZONE, GUANLAN, LONGHUA City/Province/Zip: SHENZHEN,China Telephone No: 0755-61156588 Email: okygl2011@163.com FRN:0026810242 Applicant Signature:

Date:2023.2.20 Signed by (Printed Name/Title): Gaolei Yan/ Manager