FCC ID: 2A8KU-YS03 SMART DENTAL CAMERA

WIFI Smart dental camera

(YS-03) 1YSLCAM Scan the QR code above to download and install "YSLCAM"

1.IOS APP Store IOS system users directly jump to the APP Store to download and install 2.Android Android users can download through the options at home and abroad

, There are some mobile phones, when using

"App Store", it is recommended to use the general download mode when downloading, which is more convenient than the official download method. APP GPS, When downloading the APP, the permissions for mobile phone reminders and GPS positioning need to be turned on, otherwise you will not be able to connect. 2 The steps of using the product are as follows l 3

, Press and hold the power button for 3 seconds, The lens light flashes to indicate that the device is turned on,Not connected to the phone. l WIFI MD_VO_******

,12345678 The default password "12345678", Connect the device WIFI "MD_VO_*****", After the connection is successful, the light of the lens is always on. l After the connection is successful, the real-time video will be displayed. It can record video, take pictures, share, check the power of the device,Online password modification and other operations. l ,

, WIFI , 12345678 When the device is turned on, press the WIFI button four times in rapid succession.

"12345678", which will take effect after restarting the device. You can reset it to the default password If you forget your password and cannot connect, l 3 Press and hold the power button for 3 seconds to turn off the device. 4 Indicator light status l white light flashing

Charging status/power-on disconnected status l White light is always on

Fully charged/connected state 5 Button Basic Function l 1 WIFI /

Press and hold in the power-on state (to control WIFI on/off)

. Trou b l es hooti ng 1.APP GPS. When downloading the APP, the permissions for reminders and GPS positioning need to be turned on. 2.WIFI,

,WiFi

. When turning on the WIFI button, set it up close to the phone and within a range where the devices WiFi signal is strong. 3.,

(30). When the monitor is connected to the camera, it is normal for the device to be unable to access the Internet after connecting to the hotspot. The device hotspot is only to help connect.Connect and watch the pictures captured by the device from a limited distance (empty space within 30 meters). 4.,

,. When used in a no-light environment, when turning on the video recording function, it needs to be used with the device light source at the same time for the best effect. 5., 10. In case of insufficient power, the red indicator of the light source button will flash for 10 seconds as a reminder.

. This product is mainly a single point one-to-one connection, and cannot connect multiple devices at the same time. 6.

,,. The memory card must be formatted before use for the first time. It is recommended to format it once a week to maintain optimal use. 7. If the connection fails, please repeat the above instructions. FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

connected. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is Consult the dealer or an experienced radio/TV technician for help.

Appendix ID Label SMART DENTAL CAMERA FCC ID: 2A8KU-YS03 Model:YS03 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2A8KU-YS03 TB-RF-074-1.0 Appendix ID Label Location FCC ID: 2A8KU-YS03 TB-RF-074-1.0

Shenzhen Yusin Technology Co., LTD Rm. 309, Bldg. 2, Zhangkeng Youpin Cultural and Creative Park. Longhua Dist.,Shenzhen Guangdong.China , Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-3-12 To whom it may concern:

We. Shenzhen Yusin Technology Co:, LTD, hereby certify that the equipment for which authorization is sought FCC ID:2A8KU-YSO3@ is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (httos://www.foc.gov/supplychain/coverediist) m, we confirm the above and that we are aware of the application requirements as an entity producing covered equipment. By signing this for listed under 2.911(b) and (d)(5) and (6). tion provided in this letter is based on the referenced rule parts of Title 47 of the CFR as The informa well as KDB 986446 D01. Sincerely,

Shenzhen Yusin Technology Co., LTD Add: Rm. 309, Bldg. 2, Zhangkeng Youpin Cultural and Creative Park, Longhua Dist, Shenzhen, Guangdong, China Date: 2024-3-]2 FCC ID: 2A8KU-YS03 Dear Sir/Madam, We, Shenzhen Yusin Technology Co., LTD Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only appearance is different for these model:

Product name: SMART DENTAL CAMERA Model no.: YS03, YSO3A, YS03B Sincerely, Name/Title : Yuhui Li/PM iG hwi Uj Company: Shenzhen Yusin Technology Co., LTD Address: Rm. 3049, Bldg..2Zhangkeng Youpin Cultural and Creative Phone: 1351086 Fax:

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2024-3-12>

ules (47 C.F.R.) and Pursuant to Paragraphs 0.457 and 0.459 of the Commission's R ts confidentiality for Section 552(b)(4) of the Freedom of Information Act, we reques the following products:

FCC ID Model name 2A8KU-YS03 YS03 For the product stated above, we request that the following information be held confidential;

Long-Term | Short-Term T Short-Term Confidentiality Confidentiality _ Confidentiality Days |

Exhibits T External Photos 1 Internal Photos ao Block Diagram Schematics [

_Test Setup Photos | L. User's Manual | |

"Parts List | _|

1

Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. ion short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device.

f you have any questions, please feel free to contact me at the address shown below. Company: Shenzhen Yusin Technology Co., LTD Address: Rm. 304, Bldg. 2, Zhangkeng Youpin Cultural and Creative Park, Longhua Dist.,Shenzhen, Guangdong, China Phone: 13510861084 Fax: O755-23086658 E-Mail: finance@yusin.cn

Shenzhen Yusin Technology Co., LTD Rm. 309, Bldg. 2, Zhangkeng Youpin Cultural and Creative Park, Longhua Dist. ,Shenzhen, Guangdong ,China Date: 2024-3-12 FCC ID: 2A8KU-YSO3 Model Number: YSO3 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Shenzhen Yusin Technology Co., LTD, declare that this EUT FCC ID: 2A8KU-YSO3 doesnt have Ad Hoc mode function on non-US/Canada frequencies. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Shenzhen Yusin Technology Co., LTD Rm. 309, Bldg. 2, Zhangkeng Youpin Cultural and Creative Park, Longhua Dist., Shenzhen, Guangdong,China Sincerely, . oT Ny

> + a, a x

m . /

>, ; c

> i i" / i>

Park, Longhua Dist.,Shenzhen, Guangdong,China a 13510861084 O755-23086658 finance@yusin.cn

Shenzhen Yusin Technology Co., LTD

, ' > F, :

Rm. 309, Bldg. 2, Zhangkeng Youpin Cultural and Creative Park. Longhua Dist..Shenzhe Guangdong,China _ Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-3-12 To whom it may concern We. Shenzhen Yusin Technology Co., LTD the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2A8KU-YSO3. including the signing of all documents related to these matters Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. gning this application form, we agree to Eurofins current valid General Terms and Conditions which can be viewed on following website By si

(AGB),Testing and Certification Regulations (PZO) www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, in benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. cluding FCC Name/Title : Yuhui Li/PM Yw hi L Company: Shenzhen Yusin Technology Co., LTP Address: Rm. 204, Bldg. 2, Zhangkeng Youpin Cultural and Creative Park, Longhua Dist. Shenzhen, Guangdong, China Phone: 13510861084 Pax O755-23086658 E-Mail: 2 finance@yusin.cn ie ae Te ee

48. [model] US_Agent_2.911(4\7)-U, VOS Soh Shenzhen Yusin Technology Co., LTD Rm. 309, Bldg. 2, Zhangkeng Youpin Cultural and Creative Park, Longhua Dist..Shenzhen, Guangdong.China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-3-12 U.S. Agent Designation Shenzhen Yusin Technology Co.. LTD acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought FOC ID2ZA8KU-YSO3 Name and company of US. agent ACT Lab LLC Physical U.S. address of agent 3280 East 59th Street Long Beach, CA 90805 United States FRN of U.S. agent 0033465568 Email address of U.S. agent: shuber@act-lab.com ACT Lab LLC acknowledges their obligation to accept service of process on behalf of Shenzhen Yusin Technology Co., LTD. Shenzhen Yusin Technology Co., LTD with the FRN 0032823304 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 DO1. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Signature Scott Huber Senior Technical Director ACT Lab LLC