FCC ID: 2A4RT-ZD81 Dash Camera

D1 - 3 C hannel 4K Dash Camera 4K+1080P/4K+2K/4K+1080P+1080 P Instruction Manua l Please read this manual carefully before using this product Notic e Content Thanks for ordering D1 3 Channel 4K Dash Camera. 01 Package Lists ....................................................................01 Please read this manual before using the camera. If the damage is caused by failure to follow the instruc-

tion, the warranty will be voided. 1. Please use the original power cable coming with the package. Do not connect this dash cam with the non charger, the unmatched charger or voltage converter may damage battery of dash cam, even causes danger-

ous. 2. Do not try to open the cover or disassemble the i n te r n a l b a t te r y b y yo u r s e l f w i t h o u t p ro f e s s i o n a l instruction. 3. Do not put the product into the re. 4. Do not use the product if it has become wet, or do not touch the charger with wet hands. 5. Please insert a micro SD card over class 10 that is compatible with the SDXC standard. The storage is minimum support 512MB, max to 256GB. 6. For the rst time use, please insert the SD card before 02 Product Diagram..............................................................02 03 Installation........................................................................04 04 Product Specication.....................................................05 1.Power On/Off..............................................................05 2.Video Recording Mode............................................05 3.Photo Mode................................................................05 4. Video Playback Mode..............................................05 5.Menu Setting..............................................................06 6. Parking Mode Instruction........................................12 7.WIFI and App Instruction.........................................12 8.GPS Instruction..........................................................13 9.Transport les to PC..................................................14 powering the dash cam, and format the SD card on 05 Tech Specs........................................................................1 5 camera or PC. 06 Warranty............................................................................15 01Package Lists 02 Product Diagram 1. LED indicator 2. Display 9.Reset Button 10.Power Button 3. Magnetic suction cup 11.Up Button Up/Lock/Switch/WiFi 4. Inside camera 12. OK Button Conrm/Video 5. IR light 6.Type-C port 7.TF card slot 1 3 . D o w n B u t to n S c ro l l d o w n / S w i tc h Cameras/Audio 14. M Button Menu/Mode Switch/Picture 8. Rear camera/Earphone 15. Front Camera port 16. Mic 01 02 Resolution Icon Function Explanation 03 Installation Install Front Camer a Power Button turn on/off screen Up Button scroll up/lock/

WiFi Ok Button conrm/video Down Button scroll down/switc camera/audio h M Button menu/mode switch

/photo mode 1.Press 2 seconds to power on/off 2.When the device is on, short-press to turn on/off the screen 1. On Menu/playback page, short-press to scroll up 2. On video recording mode, short-press the button to lock/unlock video 3. On video recording mode/playback page, long-press to turn on/off WiFi 4. On playback page, short-press to fast backward the video 1.Menu/Video playback: short-press to conrm the selection 2. Video mode: short-press to start/stop recordin g 1. Menu/video playback: short-press to scroll down 2. On video recording mode/video playback:

short-press to switch the cameras/front/inside/rear/front+inside/front

+ rear/front+inside+rear 3. On video recording mode: long-press to turn on/ off audio 4. On video playback: short-press to fast forward the video 1. When stop recording, short-press to enter/exit the menu setting 2.When stop recording, long-press to switch the video recording mode/playback page 3.Video recording modeshort-press to take photo 4.Video play back mode: short press to set up the video or back to previous step 1. Connect the device with suction cup, then install i t on windshield and make sure the dash cam will not distract drivers' view. 2. Connect the device with cigarette lighter for power supply, and hide the rest cable into the edge of car. 3 . S t a r t t h e e n g i n e o f c a r , t h e d e v i c e w i l l b e p o w e r e d o n automatically. Instal l Rear Camera 1. Connect the device and rear camera with the cable. 2. Stick the rear view camera to the rear window with 3M glue, and hide the rest cable into the edge of car. Note:

1. The rear view camera is not waterproof, please do not install it outside the car. 2. The length of rear camera cable is about 6 meters. The red wire on extended cable can be connected to the reversing lamp positive,then dash cam will be switched to the rear camera when reversing the car. 03 04 04 Product Specication 1.Power On/Of f Power on: The device will automatically enter video recording or connect the device to car mode when press the Power Button charger. Power off: Long press and hold the power button until the screen being off. 2.Video Recording Mode Insert the micro SD card into the card slot, and power on the device, the dash cam will be on recording mode, and the icon will turn . Press the button to stop recording, the on the display will stop blinking and disappear. Press button again, and the recording mode will be restarted. Press / to select the le and press button to play the video or picture. Short press button to set the videos. Click to delete current video/all videos, click to lock current/all, and click to unlock current/all. The locked video won't be overwritten, unless it is unlocked. 3.Photo Mode On recording mode, press button to take photos. 4. Video Playback Mode 5.Menu Setting Press button to enter vide to stop recording, long press o playback page. The left list will show the videos and pictures chronologically. Icon on upper left represents video le, and is picture le. The letter at the end of les name represents the cameras, A represents the recording videos of front camera, B represents inside camera, and C is the le of rear camera . 05 06 Resolution Exposure The cameras can be selected by switching the resolution. Please note that only the selected camera will record the videos, the non-

selected camera wont record. Resolution Icon FP S Camera Recording time with 128G SD Card Default Duration: 3mins 3840 x 2160P 2560 x 1440P 1920 x1080P Front + Inside + Rear UHD P30 QHD P30 FHD P30 30FPS 30FPS 30FPS Front Fron t Front 2160P+1440 P UHD+QHD 24FPS Front+Inside 2160P+1080P UHDP30+FHD P30 30FPS Front+Inside 1440P+1080P QHDP30+FHD P30 30FPS Front+Inside 1080P+1080P FHD P30+FHD P30 30FPS Front+Inside 2160P+1080P+1080P UHD+FHD+FHD 24FPS Front+Inside+Rear 1440P+1080P+1080P QHD+FHD+FHD 30FPS Front+Inside+Rear 1080P+1080P+1080P FHD+FHD+FH D 30FPS Front+Inside+Rear Front + Rear 3840 x2160P 2560 x1440P 1920 x1080P UHD P30 QHD P30 FHD P30 30FPS 30FPS 30FPS Front Front Front 2160P+1440 P UHD+QHD 24FPS Front+Rear 10h 21h 30h 13h 8h 15h 18h 14h 9h 10h 10h 21h 30h 13h Loop Recording To set the recording duration of each video, if the memory card is full, the new video will overwrite the earliest videos automatically. Options: Off/1min/3mins/5mins/10mins System Default: 3 min Set the exposure level as desired, causes the video become dark or bright. Options: -2.0 -5/3 -4/3 -1 -2/3 -1/3 +0.0 +1/3 +2/3

+1 +4/3 +5/3 +2.0 System Default: +0.0 WD R WDR can make the dash cam shoot the details clearly in the darker or brighter situation, and expand the shooting range. Options: On/Off System Default: On Screen Save r This function enables the screen to auto-off, but the dash cam is still on recording. Options: Off/1min/2mins/5mins/10mins System Default: Off Parking Guard When select parking guard, please connect the step down-line rst. In parking mode, the dash cam continuously buffers video and saves a parking recording when motion is detected within the dash cam's eld of view. Options: Off/Time lapse video/Parking Guard System Default: Off G Sensor When the G-sensor detects signicant or sudden movement , (such as an impact or collision) it will trigger an event recording. You can adjust the sensitivity, so minor incidents and bumps won't trigger an event recording. Options: Low/ Medium/ High System Default: Low 07 08 Frequenc y To set or reset the frequency of the AC power to reduce interference of uorescent lights (In the USA and Canada, set it to 60Hz). Options: 50Hz/60Hz System Default: 60Hz Rear Image Rotation Mirror Flip the image of rear view camera. Options: On/Off System Default: On Inside image Rotatio n Mirror Flip the image of inside camera. Options: On/Off System Default: On 2.4G/5 G Switch Wi transmission speed to 2.4G or 5G. Options: 2.4G/5G System Default: 5G Audio Recording Options: On/Off System Default: On Keypad Sound Options: On/Off System Default: On Language Options: English/Japanese/Russian/Simplied Chinese/Traditional Chinese/Italian/German/Portuguese/Spanish/French System Default: English Tim e To set up the Date/Month/Year, and select 12-hour clock and 24-

hour clock. WiFi The WiFi function is designed for connecting the dash cam wireless with your smartphone to access the recordings and function settings of your dash cam. Options: On/Off System Default: Off Night Scene Infrared LED lights of inside camera Auto/On/Off System Default: Auto 09 10 Speed Unit Options: KM/HMP/H System Default: KM/H Daylight Saving Options: On/Off System Default: Off GPS The GPS of this machine is a live tracking record and storage, including the recording of speed, time, mileage, and other state information when the car is moving, then output the information via the interface. Options: On/Off System Default: On Time Zone 24 Time zones all over the world, you can select the time zones according to your country's location. System Default: GMT+08:00 Format When formatting the card, all les will be erased. Upload all les you would like to save to your PC BEFORE you start to format the card. Options: Yes/NO Default Setting Reset all settings to factory preset. Please set it carefully, the original personalized setting parameters will not exist after setting. Options: Yes/NO Versio n Click to check the device version. 11 6.Parking Mode Instructio n The parking mode function is required to connect the step-down line. The step-down line is not included in the package, please purchase it separately if you need it. Parking mode defaults OFF. Parking mode ON. 1. If selecting parking guard option, the icon in the status bar will show P , then disconnect the ACC to power off the dash cam. Once collision occurs, the device will be turned on to record videos, then it will be turned off automatically after the motion or collision ends. 2. If selecting time-lapse option, the icon in the video recording status bar is " ". After disconnecting ACC, the device keeps recording. Video resolution will automatically jump to 1080P, recording time-lapse of 2FPS per second. 7.WiFi and App Instruction Download App and connect WiFi 1. Download APP Witcam Pro from App store or Google Play. WITCAM PRO APP downloaded via below address or scanning QR code :

https://play.google.com/store/apps/details?id

=com.zj.witcampro 2.Long Press or short press to enter system and open WiFi, it will show SSID name and password in the led display, SSID

(Witcam Pro App

) name: ZD81_CARDV684e05ca6d3c 3.Open WIFI on mobile phone, and nd SSID name (default password is 12345678), input password, then connect WiFi of the dash cam. 4.Open Witcam Pro in the mobile phone, click and add the device , it will connect to dash camera. The device can be set via the app like taking photos, recording or sharing videos. 12 App Instruction k to start/ stop recording, when recording stop, click 1. Clic t enter the memory card of dash cam and checking or downloadin videos, photos or Emergency recording; Click to set up th functions of dash cam. 2.After disconnect the WiFi of dash cam, then enter the album of o g e Witcam Pro to playback, share or edit the download videos. Note:

When connect the WiFi of Witcam Pro , the internet of phone will be cut off. Please disconnect the Witcam Pro WiFi if you need to use internet function of the phone. The WiFi signal range is about10 meters. It will disconnect from your smartphone if it is over the range

. 8.GPS Instruction The built-in GPS can record the driving trace and show the tracking on mobile phone or PC. On mobile phone: Download recording videos from Witcam Pro , disconnect the App WiFi, then connect the internet, enter Witcam Pro to play the video, it will show the GPS trace. On PC: Transport the videos to PC and play on GPS player

. Download Witcam Pro PC:

http://www.ligoor.com/app/witcam/witcampc.html 9.Transport les to PC Connect the dashcam and PC via USB. The dash cam will turn on automatically, and the screen will display "Mass Storage" and "PC Camera". Select "Mass Storage" option, the dash cam can be read as a storage disk on the computer

. Follow the instructions on the computer, watch or save the videos/

photos you need. 13

(Witcam Pro PC) 14 05 Tech Specs Function U CP Sensor Display Video Format Video Code Video Mode Photo Format Recording Time Parking Mode G-sensor G-sensor Lock WDR ADA S Night Vision GPS WiFi Languages Storage USB Interface Operation System Power Storage temperature Working temperature View Angle Parameter Nt98529 Sony IMX335(Front )Sony IMX307(Inside)Sony IMX307(Rear) 3.2inch IPS, MIPI 820*RGB*320 MP4 H.265 Loop Recording JPEG Off/1min/3mins/5mins/10mins 24 hours Off/Low/Medium/ High Support Support Not Support IR LED Support Support Warning: Changes or modifications not expressly approved by the party responsi-

ble for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that inter-

ference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following English/French/Spanish/Portuguese/German/Italian measures:

Simplied Chinese/Traditional Chinese/Russian/Japanese. 256G( More than Class 10 ) Type-C Windows XP/Win7/Win10/Mac OS DC 5V 2 A

-30---70

-20---60 Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 165(Front )+165(Inside)+170(Rear) Consult the dealer or an experienced radio/TV technician for help. 06 FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 15 16 between the radiator & your body.

Shenzhen Zhijun Technology Co., Ltd Section 2.911(d)(5)(i) Certification Equipment Type Company name: Shenzhen Zhijun Technology Co., Ltd Address: 802, Building E5, Juyin Technology Industrial Park, No. 1, Ganli Road, Jihua Street, Longgang District, Shenzhen, China Product Name: Dash Camera FCC ID: 2A4RT-ZD81 Model(s): ZD81, ZD01, ZD02, ZD03, ZD05, ZD83, ZD60, ZD59, ZD82, ZD85, ZD87, ZD88, ZD89, ZD61, ZD62 2.911(d)(5)(i) Equipment Type We, [Shenzhen Zhijun Technology Co., Ltd] certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name: Frank Lin Date: 2023-03-22 Title and Company name: manager/ Shenzhen Zhijun Technology Co., Ltd NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Shenzhen Zhijun Technology Co., Ltd Section 2.911(d)(5)(ii) Certification Applicant (Covered List) Company name: Shenzhen Zhijun Technology Co., Ltd Address: 802, Building E5, Juyin Technology Industrial Park, No. 1, Ganli Road, Jihua Street, Longgang District, Shenzhen, China Product Name: Dash Camera FCC ID: 2A4RT-ZD81 Model(s): ZD81, ZD01, ZD02, ZD03, ZD05, ZD83, ZD60, ZD59, ZD82, ZD85, ZD87, ZD88, ZD89, ZD61, ZD62 2.911(d)(5)(ii) Applicant filing We, [Shenzhen Zhijun Technology Co., Ltd] certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Frank Lin Date: 2023-03-22 Title and Company name: manager/ Shenzhen Zhijun Technology Co., Ltd NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.2

Shenzhen Zhijun Technology Co., Ltd Section 2.911(d)(7) USA Agent for Service of Process Company name: Shenzhen Zhijun Technology Co., Ltd Address: 802, Building ES, Juyin Technology Industrial Park, No. 1, Ganli Road, Jihua Street, Longgang District, Shenzhen Product Name: Dash Camera FCC ID: 2A4RT-ZD81 Model(s): ZD81, ZD01,ZD02,2D03,Z005, ZD83,Z060,Z059,Z082, ZD8&5, ZD87, ZD88, ZD89, ZD61, ZD62 2.911(d)(7) USA Designated Agent for Service of Process We, [Shenzhen Zhijun Technology Co., Ltd] (the applicant) designate [Wilson Tech Service LLC] TE' for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Applicant Company name: Wilson Tech Service LLC Company name: Shenzhen Zhijun Technology Co., Ltd Address: 1312 17th Street Suite 692, Denver, Address: 802, Building E5, Juyin CO, 80202, US Technology Industrial Park, No. 1, Ganli Road, Jihua Street, Longgang District, Shenzhen FRN Code: 0033402033 FCC ID Number: 2A4RT-ZD81 Contact Name: Wilson Cheung Contact Name: Frank Lin Telephone No: +1-716-965-5112 Telephone No: 15012568816 Email: Wilson.Cheung.FDA@gmail.com Email: frank@bepocam.cn 2.911 (d)(7)USA Agent v1.2 Forandon ghd ) Wilson Tec pix or Signature:

Title: Manager Peace reccccecccccoscccosocessoveesesecoosecese Date: 2023-03-10 Authorized Signature(s) NOTE 14: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www federalregister.covidocuments/2023/02/06/2022-28263/protectina-against-nation al-security-threats-to-the-communications-su -chain-through-the 2.911 (d)(7)USA Agent v1.2

Shenzhen Zhijun Technology Co., Ltd Agent Authorization Letter

(2023-03-22) RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, authorize Micom Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. This agreement expires one year from the current date. Sincerely, Frank Lin/manager Company Name: Shenzhen Zhijun Technology Co., Ltd Address: 802, Building E5, Juyin Technology Industrial Park, No. 1, Ganli Road, Jihua Street, Longgang District, Shenzhen, China

Shenzhen Zhijun Technology Co., Ltd Declaration on Model Differences We, Shenzhen Zhijun Technology Co., Ltd 802, Building E5, Juyin Technology Industrial Park, No. 1, Ganli Road, Jihua Street, Longgang District, Shenzhen, China Declare that the following product(s):

FCC ID: 2A4RT-ZD81 Product Name: Dash Camera Model No.: ZD81, ZD01, ZD02, ZD03, ZD05, ZD83, ZD60, ZD59, ZD82, ZD85, ZD87, ZD88, ZD89, ZD61, ZD62 Utilize the identical circuit design, PCB layout, shielding and interface with (ZD81), only the model number different. Therefore this application can be regarded as identical in performance to the submitted test sample. The manufacturer would take all the responsibilities for the above product(s). For and on behalf of Authorized person Name: Frank Lin Position: manager Date of issue: 2023-03-22

*I hereby declare that I am entitled to sign on behalf of the applicant and that the information supplied is correct and complete.

Shenzhen Zhijun Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A4RT-ZD81 Date: 2023-03-22 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description SW SECURITY DESCRIPTION Parts List Tune up In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Frank Lin Title: manager

Shenzhen Zhijun Technology Co., Ltd FCC Software Configuration Control Declaration Date: March 22, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Dash Camera/ ZD81, ZD01, ZD02, ZD03, ZD05, ZD83, ZD60, ZD59, ZD82, ZD85, ZD87, ZD88, ZD89, ZD61, ZD62 Regarding FCC Country Code Selection guidelines identified in KDB 594280 v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Frank Lin Title: manager Signature of applicant Date: 2023-03-22 FCC Software Configuration Control Declaration Rev1.1