Bluetooth Headset Airo True Wireless Stereo Earbuds User Manual Product Diagram How to use Right Microphone LED Multifunction Button Left Fully charge the earbuds along with the charging case before the first use. Pairing earbuds to phone for the first time Open the charging case and take earbuds out, earbuds will turn on automatically in 3s. You will hear from the left earbud Power on, left channel, right earbud: Power on, right channel. Power on, right channe Enable Bluetooth on your device and select GoNovate Airo. You will hear "connected" once paired successfully. GoNovate Airo Charging Port Power on, left channe
*The earbuds turn off automatically when you put them back into the charging case. To manually power on: hold the buttons for 3 seconds, power off: hold for 5 seconds. www.gonovate.com 1 Charging Case Charging Case's LED Indicator Status Pairing earbuds to phone after pairing successfully once Take the earbuds out from the charging case, they will connect with your phone automatically. Use left earbud individually as a mono earbud Only the left earbud can be used individually as a mono earbud. Paring step is the same except only the left earbud is taken out from the box. The right earbud CANNOT pair to a device individually. Charging Dock White light Micro USB Port Charging time Fully charge earbuds: 1 hour Fully charge case: 1-2 hour
*Note: Please do not charge higher than 5V/2A, doing so may damage the charging case. Charging Fully charged Flash 3x every 2 seconds Solid white Flashing Shut off Charging Case Charging Earbuds Check battery level: Press button on case once flash 1x: <25% power flash 2x: 26-50% power flash 3x: 51-75% power flash 4x: 76-100% power Button support@gonovate.com gonovate.com facebook.com/gonovate
@gonovate 4 5 6 Made in China 2 3 FAQ Control Functions LED Indicator Status Left Earbud Right Earbud Take earbuds out of case Automatic Tap either button once Tap either button once Tap either button once Hold button for 2 Second N/A Tap twice Tap twice N/A Hold button for 2 Seconds N/A Tap 3 times Tap 3 times N/A Hold button for 5 seconds Make sure earbuds are powered off.Hold each button for 20 seconds Power On Pairing Play/Pause Answer Call Hang up Reject Call Next song Previous song Activate Siri Volume +
Volume -
Power Off Manual Reset 7 Function Power on Pairing Left Earbud LED Right Earbud LED Left Earbud Voice Right Earbud Voice Flash green 3 times Power on,Left Channel Power on,Right Channel Flash red and green alternately Pairing Sucessful LED Off Connected Low Battery Charging Fully Charge Power off Manual Reset Solid red Solid green then LED OFF Flash red 3 times Chime Sound Power off The LEDS will shift from flashing green 3 times -
Flash red and green alternately-
Flashing red twice Q1 Cant get earbuds to pair A1 Quick Reset a. Put the earbuds back to the charging case and take them out again. b. Enable Bluetooth on your device and select GoNovate Airo. You will hear "connected" once paired successfully. Manual Reset a. Remove/delete all Bluetooth profiles on your phone b. Power off earbuds by holding each button for 5 seconds c. Power on earbuds by holding each button for 3 seconds until LED flash green or hear:Power on d. Earbuds will enter pairing mode automatically, wait for the left earbud LED to flash red and green e. Enable Bluetooth on your device and select GoNovate Airo. You will hear "connected" once paired successfully. Q2 Powering off 1 earbud will turn off the other as well?
A2 When the right earbud connects with the left earbud, they form 1 system. Shutting down 1 earbud will shut down the whole system/both earbuds. Q3 Can I pair earbuds to 2 devices simultaneously?
A3 No, currently the earbuds do not support multipoint technology. They will pair to 1 device at a time. To pair earbuds with a new device, turn off Bluetooth on previously paired device first. Important Safety Information Warranty Handle earbuds and case with care. They contain sensitive electronic components, including batteries, and can be damaged or cause injury if dropped, burned, punctured, crushed, disassembled, or if exposed to excessive hear or liquid. Don't use damaged earbuds or case. Batteries Do not take earbuds/case apart, you may damage the batteries, which could cause overheating and injury. Hearing Loss Do not listen at high volume levels for long periods; it may permanently damage your hearing. Driving Hazard Use of earbuds while operating a vehicle is not recommended and is illegal in some areas. Check and obey the applicable laws and regulations on the use of earphones while operating a vehicle. Choking Hazard Keep earbuds away from small children. Earbuds may present a choking hazard or cause other injury to small children. GoNovate products are covered by GoNovate parts and labor warranty for 12 months from date of purchases. If the device becomes defective, please email: support@gonovate.com to launch warranty claim. Please note we can only provide after sales services for products that are sold by GoNovate or GoNovate authorized retailer and distributor. If you have purchased your unit from a different place, please contact that seller for return and warranty issues. The following are excluded from GoNovate warranty cover:
Devices purchased as 2nd hand, used or from unauthorized sellers Damage resulted from misuse or abusive action Damage resulted from chemical, fire, radioactive substance, posion, liquid Damage caused to any 3rd party/person/object and beyond Package Contents GoNovate Airo x1 Charging Case x1 Charging Cable x1 Eartips x4 User Manual x1 Warranty Card x1 Support For support and troubleshooting information, email to:
support@gonovate.com 8 9 10 11 12 13 14 FCC ID: 2ALJI-G1618 FCC WARNING:
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter