FCC ID: 2AV5BK2220 Integrated Smart Terminal

Quick Setup Guide K2220 Integrated Smart Terminal Shenzhen Zolon Technology Co., Ltd. 1 1. Checklist Congratulations on receiving your Zolon Technology terminal. We do hope you enjoy it! The box you have just opened should contain the following items:

1 x K2220 Integrated Smart Terminal 1 x AC Power Cable 1 x External Antenna 4 x Backup Screws 2. Product Description Figure 1: front view 2 Figure 2: Back view Figure 3: Bottom view 3 Figure 4: view from all sides 3. Installation 1) Elys Display 22 Type-C port: Connect PC Type-A: Connect USB device. AC Power: Connect AC Cable. RJ45: Connect network cableSupport POE(opt) SD card: Please insert the SD card into the SD card slot according to the direction. 2) Installation 1Orient the AC power plug in the proper direction and insert it into the power port. 4 2Insert the Ethernet cable into the RJ45 Ethernet port until the retaining clip clicks into place. 3After all cables are plugged into their ports, the interface baffle can be installed after orienting it as indicated in the figure. Note that cables can be routed outside from the openings at the side of the baffle. 5 4Fix the interface baffle in place by screwing the hand-screw clamps in place as indicated in the figure above. 5After the interface baffle is fixed in place, insert the external antenna through the hole indicated in the above figure and then screw it in place. 6 6Press the power button to turn on the device for three seconds until the main screen displays normally 4. Instructions Power ON/OFF Power on: Press and hold the Power button (on the back) for three seconds until the main screen displays normally. Power off: Press and hold the Power button (on the back) for three seconds 7 until the shutdown menuappears, tap Shutdown, and then shutting...appears. The terminal will be turned off after a fewseconds. 5. Specification Operation System: Android 11 CPU: Quad-core,2.0GHz processor Memory: 4GB RAM + 64GB Flash Memory Display: 21.5 inch,resolution:1920*1080, multi-touch capacitive touch screen Audio: Built-in dual speaker Wireless Communication: Support Wi-Fi2.4/5G,Bluetooth 5.0 Peripheral Ports: 2*Type-A host ports,1*RJ45,1*SD Card ,1*HDMI OUT,1*Type-C OTG,1*AC Power ports 6. General Usage Tips Avoid placing this product in direct sunlight for extended periods, nor in environments with excessively high temperature, moisture or dust. Only qualified personnel should repair this product. Do not plug/unplug any units of the product when it is power on, otherwise it may damage the internal circuit. 7. Important Safety Warning We recommend you only use power adaptors supplied by Zolon Technology. If you must use 3rd party supplier accessories, please ensure specifications meet exactly those recommended for our products, which must comply with international and local regulations & standards. Non-compatible power supplies, chargers or batteries could cause fires or even explosions, and will invalidate any product warranty. 8 8. Environmental Parameters Working EnvironmentTemperature:-1050(14122) Storage EnvironmentTemperature:-2070(-4158)

(non-charging) Humidity5%95% (non-condensing) 9. Icons Dispose in a professional recycling manner Class II equipment For indoor use only Energy efficiency marking AC voltage DC voltage Trademark notice:

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Zolon Technology Limited is under license. Other trademarks and trade names are those of their respective owners. FCC Regulations:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 9 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution:

10 Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &

your body. ISED Notice This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. 11 Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

1) l'appareil ne doit pas produire de brouillage, et 2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. Cet appareil et son antenne ne doivent pas tre situs ou fonctionner en conjonction avec une autre antenne ou un autre metteur, exception faites des radios intgres qui ont t testes. The County Code Selection feature is disabled for products marketed in the US/ Canada. La fonction de slection de l'indicatif du pays est dsactive pour les produits commercialiss aux tats-Unis et au Canada. Radiation Exposure Statement:

12 This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:

Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Le dispositif a tutilis pour la construction de la bande 5150 5250 MHz pour la consommation de matriel pour rduire le potentiel pour les systmes de tlvision mobiles. Shenzhen Zolon Technology Co., Ltd. Manufacturer: Shenzhen Zolon Technology Co.,Ltd. 13 Address: Room 701, Jinke Company Office Building, No.8 Qiongyu Road, Science and Technology Park, Yuehai Street, Nanshan District, Shenzhen, Guangdong, China. Tel: +86 755 86727847 Website: www.szzolon.com Zolon continually invests to maintain its high quality products up to date with the latest certifications, therefore a comprehensive list can be requested via the website's contact form or on downloadable product brochures. 14

Quick Setup Guide K2160 Integrated Smart Terminal Shenzhen Zolon Technology Co., Ltd. 1 1. Checklist Congratulations on receiving your Zolon Technology terminal. We do hope you enjoy it! The box you have just opened should contain the following items:

1 x K2160 Integrated Smart Terminal 1 x AC Power Cable 1 x External Antenna 4 x Backup Screws 2. Product Description Figure 1: front view 2 Figure 2: Back view Figure 3: Bottom view 3 Figure 4: view from all sides 3. Installation 1) Elys Display 16 Type-C port: Connect PC Type-A: Connect USB device. AC Power: Connect AC Cable. RJ45: Connect network cableSupport POE(opt) SD card: Please insert the SD card into the SD card slot according to the direction. 2) Installation 1Orient the AC power plug in the proper direction and insert it into the power port. 4 2Insert the Ethernet cable into the RJ45 Ethernet port until the retaining clip clicks into place. 5 3After all cables are plugged into their ports, the interface baffle can be installed after orienting it as indicated in the figure. Note that cables can be routed outside from the openings at the side of the baffle. 4Fix the interface baffle in place by screwing the hand-screw clamps in place as indicated in the figure above. 5After the interface baffle is fixed in place, insert the external antenna through the hole indicated in the above figure and 6 then screw it in place. 6Press the power button to turn on the device for three seconds until the main screen displays normally 4. Instructions 7 Power ON/OFF Power on: Press and hold the Power button (on the back) for three seconds until the main screen displays normally. Power off: Press and hold the Power button (on the back) for three seconds until the shutdown menuappears, tap Shutdown, and then shutting...appears. The terminal will be turned off after a fewseconds. 5. Specification Operation System: Android 11 CPU: Quad-core,2.0GHz processor Memory: 2GB RAM + 32GB Flash Memory Display: 15.6 inch,resolution:1920*1080, multi-touch capacitive touch screen Audio: Built-in dual speaker Wireless Communication: Support Wi-Fi2.4/5G,Bluetooth 5.0 Peripheral Ports: 2*Type-A host ports,1*RJ45,1*SD Card,1*HDMI OUT, 1*Type-C OTG1*AC Power ports 7. General Usage Tips Avoid placing this product in direct sunlight for extended periods, nor in environments with excessively high temperature, moisture or dust. 8 Only qualified personnel should repair this product. Do not plug/unplug any units of the product when it is power on, otherwise it may damage the internal circuit. 8. Important Safety Warning We recommend you only use power adaptors supplied by Zolon Technology. If you must use 3rd party supplier accessories, please ensure specifications meet exactly those recommended for our products, which must comply with international and local regulations & standards. Non-

compatible power supplies, chargers or batteries could cause fires or even explosions, and will invalidate any product warranty. 9. Environmental Parameters Working EnvironmentTemperature:-1050(14122) Storage EnvironmentTemperature:-2070(-4158) (non-

charging) Humidity5%95% (non-condensing) 10. Icons 9 Dispose in a professional recycling manner Class II equipment For indoor use only Energy efficiency marking AC voltage DC voltage Trademark notice:

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Zolon Technology Limited is under license. Other trademarks and trade names are those of their respective owners. FCC Regulations:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause 10 harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution:

11 Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &

your body. ISED Notice This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. 12 Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

1) l'appareil ne doit pas produire de brouillage, et 2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. Cet appareil et son antenne ne doivent pas tre situs ou fonctionner en conjonction avec une autre antenne ou un autre metteur, exception faites des radios intgres qui ont t testes. The County Code Selection feature is disabled for products marketed in the US/ Canada. La fonction de slection de l'indicatif du pays est dsactive pour les produits commercialiss aux tats-Unis et au Canada. Radiation Exposure Statement:

13 This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:

Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Le dispositif a tutilis pour la construction de la bande 5150 5250 MHz pour la consommation de matriel pour rduire le potentiel pour les systmes de tlvision mobiles. Shenzhen Zolon Technology Co., Ltd. Manufacturer: Shenzhen Zolon Technology Co.,Ltd. 14 Address: Room 701, Jinke Company Office Building, No.8 Qiongyu Road, Science and Technology Park, Yuehai Street, Nanshan District, Shenzhen, Guangdong, China. Tel: +86 755 86727847 Website: www.szzolon.com Zolon continually invests to maintain its high quality products up to date with the latest certifications, therefore a comprehensive list can be requested via the website's contact form or on downloadable product brochures. 15

Shenzhen Zolon Technology Co., Ltd. 401, Building 3, Shenzhen Software Park, Maling Community, Yuehai Street, Nanshan District, Shenzhen City, Guangdong Province, P.R.C Date: October 7, 2023 DTS-UNII Device Declaration Letter To whom it may concern, We have declared below featured for FCC equipment authorization, Device FCC ID: 2AV5BK2220

(1) DFS Device --

Master Client without radar detection capability Client with Radar detection capability , N/A

(2) Active / Passive Scanning , ad-hoc mode access point capability Frequency Band

(MHz) Active Scanning

(the device can transmit a probe

(beacon)) Yes , Yes , Yes , Yes , No No No No passive scanning

(where the device is can listen only with no probes) No No No No Yes , Yes , Yes , Yes , Ad Hoc Mode or WIFI Direct capability Access point capability Yes , Yes , Yes , Yes , No No No No Yes , Yes , Yes , Yes , No No No No 5150-5250 5250-5350 5470-5725 5725-5850 Country code selection ability -

(3) No If yes, please explain how it was implemented: (please also help to provide detail of options for each country selection) Yes ,

(4) Meet 15.202 requirement -

Please check below:

Yes, No, A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. For client devices that have software configuration control to operate in different modes (active scanning

(5) in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Shenzhen Zolon Technology Co., Ltd. 401, Building 3, Shenzhen Software Park, Maling Community, Yuehai Street, Nanshan District, Shenzhen City, Guangdong Province, P.R.C No Apply, (If apply, please help to provide explanation on it was implement, and how software Apply, was controlled)

. _______________ Contact Person: Jenna Tan Telephone Number: 86-755-86727847 Fax Number: 86-755-86155423 Email: certmng@szzolon.com

Shenzhen Zolon Technology Co., Ltd. 401, Building 3, Shenzhen Software Park, Maling Community, Yuehai Street, Nanshan District, Shenzhen City, Guangdong Province, P.R.C Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: October 7, 2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID:

Shenzhen Zolon Technology Co., Ltd. certifies that the equipment for which authorization is sought is not 2.903 of the FCC rules. Sincerely, _______________ Contact Person: Jenna Tan Telephone Number: 86-755-86727847 Fax Number: 86-755-86155423 Email: certmng@szzolon.com Rev 1/26/2023 Shenzhen Zolon Technology Co., Ltd. 401, Building 3, Shenzhen Software Park, Maling Community, Yuehai Street, Nanshan District, Shenzhen City, Guangdong Province, P.R.C Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: October 7, 2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID:

Shenzhen Zolon Technology Co., Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or Sincerely, ________________________ Contact Person: Jenna Tan Telephone Number: 86-755-86727847 Fax Number: 86-755-86155423 Email: certmng@szzolon.com Rev 1/26/2023

Shenzhen Zolon Technology Co., Ltd. 401, Building 3, Shenzhen Software Park, Maling Community, Yuehai Street, Nanshan District, Shenzhen City, Guangdong Province, P.R.C Date: October 7, 2023 Declaration We, Shenzhen Zolon Technology Co., Ltd. declare that the device, FCC ID: 2AV5BK2220, does not support any non-US channels in all the operational mode(s). All non-US frequencies, US 2.4G channel 12-13 and Country code selection are disabled through proprietary software and are not user changeable. Should you have any question or comment regarding this matter, please do not hesitate to contact me. Sincerely yours, _______________ Contact Person: Jenna Tan Telephone Number: 86-755-86727847 Fax Number: 86-755-86155423 Email: certmng@szzolon.com