FCC ID: 2AV5BL160X Smart Desktop Terminal

L16XX Smart Desk Terminal User Guid L1600:

15.6 Touch Screen L1601:

15.6 Touch Screen+

10.1Display screen L1602:

15.6 Touch Screen+

15.6Display screen 1. Contents Checklist Please check the components after unpacking. If any one of them is missing, or if there is a page missing from the product manual,ect., please contact the dealer. Name L1600 AC Power Adapter AC Power cable 2. Product Description L1600 Qty. 1 1 1 L1601 increased accessories L1602 increased accessories 3.Installtion DC port: Connect Power Adapter Type-C port: Connect USB device. USB Port: Connect USB device. Uart Port: Connect Uart device. Lan Port:Connect Internet. DK Port:Connect Cash Box. SD: Micro SD Card SAM: mini SAM Card Headphone Jack:3.5 Headphone 4. Instruction Power ON/OFF Power on: Press and hold the Power button for three seconds until the main screen displays normally. Power off: Press and hold the Power button for three seconds until the shutdown menu appears, tap Shutdown, and then shutting...appears. The terminal will be turned off after a few seconds. 5. Specification Operation System: Android 12 CPU: Qcta-core,2.0GHz processor Memory: 2GB RAM + 16GB Flash Memory (2GB RAM + 16GB optional) Main Display: 15.6 inch,resolution:1920*1080, multi-touch capacitive touch screen L1601 Secondary Display: 10.1 inch,resolution:800*1280 L1602 Secondary Display: 15.6 inch,resolution:1920*1080 Audio: Built-in speaker/Built-in MIC Camera: 5 mega-pixel auto-focusing camera Wireless Communication: Support Wi-Fi2.4/5G,Blutooth 5.0 Peripheral Ports 1 Type-C port 4 USB TypeA ports 1 3.5 Headphone port 1 Micro SD Card port 1 Mini SAM Card port 1 DC port 1 UART port 1 DK port 1 LAN port 1 Pogo PortSupport D135 6. Cautions of Installation and Usage 1Avoid exposing the terminal in hot, humid, dusty or strong electromagnetic environment. 2Do not violently vibrate, shake or beat the product. 3Do not plug/unplug any units of the product when it is power on, otherwise it may damage the internal circuit. 4Do not maintain the terminal if you are non-professional Trademark notice:

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Zolon Technology Limited is under license. Other trademarks and trade names are those of their respective owners. FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can FCC Caution:

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. ISED Notice This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1) 2) this device may not cause interference, and this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

1) 2) l'appareil ne doit pas produire de brouillage, et l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps qu'aucune autre antenne oumetteur.Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre leradiateur et votre corps. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Le dispositif a tutilis pour la construction de la bande 5150 5250 MHz pour la consommation de matriel pour rduire le potentiel pour les systmes de tlvision mobiles. FCC Suppliers Declaration of Conformity Smart Desktop Terminal / L1600, L1601, L1602, This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party: PAX Technology, Inc. 8880 Freedom Crossing Trail, Building 400, 3rd Floor Suite 300, Jacksonville , Florida, 32256 Help-desk 1 877-859-0099

Confirmation Letter Shenzhen Zolon Technology Co., Ltd. WE, Shenzhen Zolon Technology Co., Ltd. The product: Smart Desktop Terminal And model No.: L1600, L1601, L1602 FCC ID: 2AV5BL160X We declare that the software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a master. This includes restrictions on transmissions for beacons and support for ad-hoc peer-to-peer modes. Best Regards Company Name: Shenzhen Zolon Technology Co., Ltd. Contact Name: Jenna Tan Title of Person: Certification Supervisor Address: 401, Building 3, Shenzhen Software Park, Maling Community, Yuehai Street, Nanshan District Shenzhen Guangdong 518057 China Date: 10/25/2023

Shenzhen Zolon Technology Co., Ltd. Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject:

Request for Confidentiality FCC ID:

To Whom It May Concern:

2AV5BL160X Pursuant to the provisions of Sections 0.457 and 0.459 of the 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Software Security Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: Shenzhen Zolon Technology Co., Ltd. Contact Name: Jenna Tan Title of Person: Certification Supervisor Address: 401, Building 3, Shenzhen Software Park, Maling Community, Yuehai Street, Nanshan District Shenzhen Guangdong 518057 China Date: 12/07/2023