FCC ID: 2AUJC-SA-003 Zigbee OnOff Controller

Samsung SmartThings Ask, Alexa, discover my devices."

Amazon Smart Home Samsung SmartThings FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). the party Any Changes or modifications not expressly approved by responsible for compliance could void the user's authority to operate the equipment. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:

The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with

. minimum distance 20cm between the radiator and your body. FCC ID:2AUJC-SA-003

Report No.: TB-FCC168879 Page: 5 of 8 Appendix EUT Internal Photographs Photo 7 Internal of EUT Photo 8 Appearance of PCB FCC ID: 2AUJC-SA-003 TB-RF-074-1.0 Report No.: TB-FCC168879 Page: 6 of 8 Photo 9 Appearance of PCB Photo 10 Appearance of PCB Zigbee ANT. FCC ID: 2AUJC-SA-003 TB-RF-074-1.0

Report No.: TB-FCC168879 Page: 3 of 8 Appendix EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID: 2AUJC-SA-003 TB-RF-074-1.0 Report No.: TB-FCC168879 Page: 4 of 8 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID: 2AUJC-SA-003 TB-RF-074-1.0

Appendix FCC ID Label Report No.: TB-FCC168879 Page: 1 of 8 FCCID:2AUJC-SA-003 Model:SA-003-Zigbee This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference that may cause undesired operation. interference received, including 30mm 30mm FCC ID: 2AUJC-SA-003 TB-RF-074-1.0 Report No.: TB-FCC168879 Page: 2 of 8 Appendix ID Label Location ID LOCATION FCC ID: 2AUJC-SA-003 TB-RF-074-1.0

ShenZhen ZYtec Co., Ltd. Declaration concerning Antenna Specification It is hereby declared that the product Model No.: SA-003-Zigbee FCC ID: 2AUJC-SA-003 fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for internal antenna type(s) described below:

Model No. of antenna: N/A Type of antenna:

1dBi PCB Antenna Gain of the antenna:

Frequency range:

1dBi 2405-2480 MHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name:ShenZhen ZYtec Co., Ltd. Address: 8512, 5th Floor, Building 8, Banlihuahui, 32 Tongsha Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China shenZhen City:

ZIP / Postal code:

Country:

China Place: Wengang Jiang/ EE Date: 2019-10-17 Signature:

version01