FCC ID: 2A496-IPCAM010 Mini Camera

HD Mini Camera User Manual 1. Download and install APP IOS Device supports searching " Hope Way " in App Store to download and install " Hope Way ";

Way 1:

Way 2:

Android /IOS Device scan the QR code to download " Hope Way ".

(Android / IOS) 2. Login:

Register by email Quick login by Face book / Twitter / Line account. 3. Introduction of LED indicator :

Charging : When charging, the red light is on; When full charged, red light is off.The camera turns on automatically when charging Hot spot mode: Turning on the camera, blue & green lights are on, after 10 secs the green light is off, wait for 10 secs, the green light is flashing, now you may start to connect the camera hot spot mode on mobile phone Wlan. WIFI mode: The blue light is on, the green light is flashing, after 10 secs the green light is off, wait for 20 secs, the blue & green light are constant on, now the camera is under WIFI mode. Reset: Press & Hold the reset hole till the blue and green light are off, release and then the blue light is on , wait few secs the green light is flashing, now you may start with the hot spot mode connection. 4. Introduction of Button Operations:

Reset : If you met any connecting or password problems , please restart Restart : If the camera dies and all buttons not function, please reset the camera. the camera. 5. Four Working Mode :

1 No WIFI No TF Card : (Hot spot mode) 2 No WIFI with TF Card : (App connection not required) 3 With WIFI No TF Card : (WIFI mode) 4 With WIFI with TF Card: (WIFI mode) 6. Hot spot mode connection 1 Turn on camera: Press ON/OFF to turn on the camera, the blue

& green lights are on, after 10 secs the green light is off , wait for 10 secs, and the blue light is on, the green light flashes slowly. 2 Go to the mobile phone WLAN setting , search and connect the Wi-Fi which named IP-NNNNNNNNNNN. 3 Open "Hope Way ", pull down to refresh, the camera is online. 7. WIFI mode connection (Remote live video watching ) Way1:

After connecting the hot spot mode, it will ask you whether to connect WIFI ? Click yes and connecting the WIFI. Way2:

camera. When camera is online under hot spot mode , click [ Set ] --- Create Password --- Network --- Choose your WIFI from below options and input corresponding password, wait 3-5 minutes for rebooting the When the camera blue and green indicator lights are both on, go to app to pull down to refresh, then the camera is online. 8. App Introduction 1 :

Camera Set 1 2 Cloud service see 16.Cloud storage service 3 Motion Detection Alarm (see 12.Motion Detection Set) 4 Motion Detection Event 5 Recording files playback (see 10. Playback video records ) 6 Device 7 Library ( Photos and videos ) 8 Account Setting ( see 15. Account set) 9. App Introduction 2 :

Recording 1 2 3 4 5 6 7 8 9 Full Screen Image Rotate Image Turn on / off audio 10 Snapshot Turn on / off camera blue and green indicator light Turn on Auto Night Vision / turn off Night Vision Resolution (Standard /High definition ) Four Camera View see14.Four camera image Set Motion Detection Zone (see 12.Motion Detection Set) 10. Library :

Snapshots & Manually Video recording files are saved in Library 11. TF Card recording :

1 Please use a original C10 (8G - 256G) TF card , after connecting the camera hot spot mode, insert the TF card , when it shows the capacity , the camera starts recording. 2 Turn on the audio , recording the video and audio at the same time. When the audio is on, there might be some environment noise in playback files. 12. Motion Detection Set:

1 When the camera connected under WIFI mode ,Click " Settings

" - " Alarm" -Alarm on / off 2 Alarm on / off ( Clear alarm history) 3 Motion Detection Area :

13. Password Set :

When first connecting the camera , you need to set a password. If you forget the password , please reset the camera , then set a new password. 14. Four camera image :

then step to four view. Please firstly connect and bond four cameras on app under WIFI mode, 15. Account set :

Note :

camera model. The Pop-up alert, sound and vibration are not functions of this mini 16. Cloud storage service:

The cloud purchase service only work when camera is under wifi mode. 17. Device Share:

1 2 Please connect the camera with WIFI & bond the device Go to set - share device - search ID (which you want to share with) - set the permission- confirm 18. Specifications:

Resolution Video Format Visual Angle Motion Detection IR LED Battery Life 1080P Mp4/ MKV 150 degree 6 meters 4 3-4 Hours Compressed Format H.264 Storage Temperature

-20-80 degree centigrade Operating Temperature

-10-60 degree centigrade Operation Humidity 15-85%RH Recordings Storage TF card / Cloud Compatible System Android / IOS phone 19. Warm Tips :

When connecting the hot spot mode, please first check the indicator light, when the blue light is on, the green light is flashing , then step to app to connect. When connecting the WIFI mode, please first check the indicator light, when the blue light and green light are both on, step to app to pull down and refresh, then the camera is online. If the indicator light is correct , but the camera is offline , please go to mobile phone WLAN to check the WIFI, if the wifi not connected, please connect your wifi manually and go back to camera app to refresh, the camera will be online. 20. Remote Add WIFI connected camera :

One camera had connected under WIFI mode, people in other places may add the camera by scanning the QR. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be u sed in portable exposure condition without restriction

C5266091_X10_Ed.2 shenzhenshi huayulong dianzikejiyouxiangongsi Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date:

2022.03.03 Subject: Request for Confidentiality FCC ID: 2A496-IPCAM010 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, 1/1 C5266091_X10_Ed.2 Signature:

Name: Jason Xie Title: CEO 1/1

C5266091_X8_Ed.1 Letter of Authorization shenzhenshi huayulong dianzikejiyouxiangongsi Company: shenzhenshi huayulong dianzikejiyouxiangongsi Address: A1502 Tower A xinghe world yabao 1st road bantian street shenzhen longgang Guangdong Product Name: Mini Camera Model Number: ICD-CXYLG- IPCAM010 CXY-IPCAM001 New - CXY-

IPCAM001 ICD-CXY- IPCAM008 ICD-CXYLG- IPCAM008 CXYLG-

IPCAM009 ICD-CXYLG-IPCAM011 ICD-CXYLG-IPCAM012ICD-CXYLG-

IPCAM013 ICD-CXYLG-IPCAM014 ICD-CXYLG-IPCAM015 CXYLG-

IPCAM010 CXYLG-IPCAM011 CXYLG-IPCAM012 CXYLG-IPCAM013 CXYLG-IPCAM014CXYLG-IPCAM015 FCC Identifier: 2A496- IPCAM010 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Jason xie Title: CEO Date: 2022.03.03 Signature of applicant:

1/1 C5266091_X8_Ed.1 1/1

shenzhenshi huayulong dianzikejiyouxiangongsi Model Difference Product description: Mini Camera Model name: CXY-IPCAM001New - CXY- IPCAM001ICD-CXY-

IPCAM008ICD-CXYLG- IPCAM008CXYLG- IPCAM009ICD-CXYLG-

IPCAM011ICD-CXYLG-IPCAM012ICD-CXYLG-IPCAM013ICD-

CXYLG-IPCAM014ICD-CXYLG-IPCAM015CXYLG-IPCAM010CXYLG-

IPCAM011CXYLG-IPCAM012CXYLG-IPCAM013CXYLG-IPCAM014 CXYLG-IPCAM015 Trade Name: CUSFLYX FCC ID: 2A496- IPCAM010 All the model are the same circuit and RF module, only for model name. Regards Sincerely Clients signature:

Clients name / title : Jason xie (CEO) Contact information / address: A1502 Tower A xinghe world yabao 1st road bantian street shenzhen longgang Guangdong