FCC ID: 2A65X-AX90 AX1800 WiFi 6 Dual Band Wireless USB Adapter

X3 Quick installatin Guide Wireless USB Adapter 1 Hardware Installation 2 Driver lnstallatin nis completed, a. After the hardware installati and opens the Realtek cognizes disk. Select lfit desnt ppup automaticall openthe deskpthiscomputer"

tpenthe Realtek dubleclick disk the cmputerautmatically and penthe windows folder. and hedecony s,pwindows10 sysms V1.0 WindWS Readme.txt b. Dubleclick driver interface tpenW1fiAutoinstllSetup.exe, click Install the to install and click After about one minute, the n tcmpletethe installati will clseautomatically in the installation interface, Wf1Autall Reodytofo,tall Setup15nov,reyton......4Instal ooyo<

Click Install to:,ntn.JeE Ftabboo E Troubleshooting CD, the setup wizard After inseing the Driver What shuldI do?

1. Please pen"Cmputer", and find the "B-lmk trunit

' autorun.exe"

2. Make SUthecmputeris configured can use aplay. devices does ntpop up. CDDubleclickn tautplaymediandall I can't use the wireless USB N adapter. After I install the driver, What shuldI do?

1. Try antherUSB prtnthe cmputer. 2. Make sure your computer uninstall the other driver desnot have a similar If s driver. again adapter and plug in the wireless The p;ct,,e prod,ct sebesuteactual

;,to

@NPleaseclose firewallrsecurity protensoftware before inst 3 Wireless Click and select Select Receiver the wireless network yurWi-Fo network the namefthe wireless iconinthe lower right corner netwrktbecnnected. and enter the Wi-Fi passwowhenprompted of the computer FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

FCC ID: 2A65X-AX90 LABEL AND LOCATION

(Size: L0.8.0cm x 0.8cm) Label Location _____________________________________________________________________________________________________

Shenzhenshichengyishunkejiyouxiangongsi Agent Authorization Company: Shenzhenshichengyishunkejiyouxiangongsi Address: Shenzhenshifutianqu huaqiangbeijiedao fuqiangshequ zhenhualu55haoshibida gongyidasha nengyuan6ceng605, Shenzhen Guangdong, China, 518000 Product Name: AX1800 WiFi 6 Dual Band Wireless USB Adapter Trade Mark: N/A Model Number(s): AX90 FCC ID: 2A65X-AX90 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Zhiwei Fang Title:

Manager Company: Shenzhenshichengyishunkejiyouxiangongsi Date: 2022-06-14

Shenzhenshichengyishunkejiyouxiangongsi Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022-06-14 Subject; Request for Confidentiality FCC ID: 2A65X-AX90 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

Schematic Diagram Block Diagram Operational Description BOM Software Security Requirements External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name / Title: Zhiwei Fang / Manager Company: Shenzhenshichengyishunkejiyouxiangongsi Address: Shenzhenshifutianqu huaqiangbeijiedao fuqiangshequ zhenhualu55haoshibida gongyidasha nengyuan6ceng605, Shenzhen Guangdong, China, 518000 Phone: +86 13510688603 Fax: /

E-Mail: szsrx168@163.com

Shenzhenshichengyishunkejiyouxiangongsi FCC Software Configuration Control Declaration Date: June 16, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: AX1800 WiFi 6 Dual Band Wireless USB Adapter / AX90 Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Zhiwei Fang Title: Manager Signature of applicant Date: 2022/06/16 FCC Software Configuration Control Declaration Rev1.1