FCC ID: 2A6UYWX001 Painter Light Control Box

User Manual Painter Light WL001 Thank you for purchasing our products. This product is suitable for home decoration, leisure and entertainment, and other occasions. Packing List Painter Light x 1 Adapter x 1 User Manual x 1 Product Specification Power input: DC5V 4A Light source: red light: 620-625nM, green light: 525-530nM, blue light: 455-460nM, warm white: 2800-3000K Light Coverage area (10 cm from the wall ) : 3.5 * 2m Control mode: Control box and APP Ambient temperature: indoor room temperature Adapter waterproof: IP44 Product net weight: 863g Product size: light box 301 * 45 * 80 mm, control box 100 * 65 * 17 mm Product Description 1 Adapter 2 Control box 3 Painter light 4 Light effect DC 5V jack Reset hole Microphone Timer indictor Power indicator Music rhythm button Mode key Timer button Power button Type-C port 1 Type-C port 2 Operation steps 1. Plugged in, connected to the control box and painter light. At this point, the power indicator will always be blue light after power on. 2. Press the power button to turn on/off the painter light. 3. Press the mode key, you can change the lighting effect, a total of five light effects.

#1 rainbow color

#2 red, green, blue and red

#3 aurora color

#4 lavender sea

#5 warm white light 4. Press the music rhythm button to change the music rhythm mode, a total of four modes.

#1 breathing mode

#2 running light mode, low sensitivity

#3 running light mode, high sensitivity

#4 jumping mode 5. Press the timer button to enable or disable the "timer shutdown" function.

(1) After opening, the timer indicator will always be blue, nd it will automatically shut down after 30 minutes by default.

(2) APP adjustable timing time. 6. Reset hole, long press this button light flashes three times, keep the light on and then release, restore factory settings. Of course, you can also download the Woohlab APP on your mobile phone and control the painter light through the APP. Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference received, including interference that may cause undesired operation. interference, and (2) this device must accept any NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The distance between user and products should be no less than 20cm. FCC ID:2A6UYWX001

DATE : 2022-06-20 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Actas Agent On our behalf, | appoint Jason Wu of Global United Technology Services Co., Ltd.and No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China to act as our agent in the preparation of this application for equipment certification. | certify that submitted documents properly describe the device or system for which equipment certification is sought. | also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Shenzhenshixianzhuokejiyouxiangongsi and Room 201, Building A, Qianwan Road 1, Qianhai Shenzhen-Hong Kong Cooperation Zone, Shenzhen, China Signature: Cae a Name: Steven YANG Title: General Manager Company: Shenzhenshixianzhuokejiyouxiangongsi

Shenzhenshixianzhuokejiyouxiangongsi DATE : 2022-06-20 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ECC ID: 2A6BUYWX001 Product Name: Painter Light Control Box Request for Confidentiality To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. i<j Schematic Diagram

| Block Diagram x| Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

| External Photos

(<| Test Setup Photos p< Internal Photos

(xi User Manual

(|For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 DO1. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Signature: S a ae Name: Steven YANG Title: General Manager Company: Shenzhenshixianzhuokejiyouxiangongsi

Differences Declaration To whom concern, We company Shenzhenshixianzhuokejiyouxiangongsi hereby declares:

The product models WX001, WX002, WX003, WX00S, WxX006, WX007, WX008, WX009, WX010 are identical in the same PCB layout, interior structure and electrical circuits, The differences are housing appearance, size, color and model name for commercial purpose. Authorized signature: Sey, | fon Name: Steven YANG Date: 2022-06-20