FCC ID: 2A4QK-SW06 SMART WATCH

SW06 Smart Watch User Manual Please refer to this manual before using the product. V1.0 Notes:

1.The company reserves the right to modify the contents of this manual without any further notification. It is normal that some functions may vary in differentsoftwareversions. 2.Please charge the smart watchwith configured chargerfor no less than 2 hours before use. 3.Please install and connect to suggested App and set personal informationbefore use. Please refer to below guidance and use the smart watch properly. 01 Wearing method Please wear the device on your wrist horizontally, about one finger from the carpal and adjust to a comfortable position. Below picture for reference. Note: Please wear the device a bit tighter when making heart rate testing. power button workout mode button 02 Download App and Pairing 1.Long press the power button to turn on the device, slide down from main interface, open setting- App Download, and use the mobile phone to scan the code. Or you can also scan below QR code or search for GloryFit in App store. 2. Open the App and BT, search and select the corresponding device on App as guided. Notes:

1.Please keep BT on during paring to ensure successful connection. 2.Please long press power button 3s to reboot the device if couldnt find the device during paring. Or choose reset on the device and search the device again. 03 Operation a.Shortcut Setting Page: Swipe down from homepage. b.Message: Swipe up from homepage. c.Main Menu: Swipe right from homepage. d.Function Shortcut Interface: Swipe left from homepage. e.Watch Dial Setting: Long press dial for 3s and slide left or right to choose. f.Power ON/OFF: Long press power button for 3s to power on; From home page, long press power button 3s, and tap to power off. g.Return Previous Menu/ Screen On or Off: Press power button. h.Sports Shortcut key: Press the below side button to quickly switch to training interface. 04 Functions Training:

13 sports modes Running, Walking, Cycling, Climbing, Spinning Bike, Yoga, Skipping, Gymnastic, Badminton, Ping-pong, Boating, Sit-ups and Free training. Sports records are visible on the App. Pedometer:

Record daily steps, distance, and calories. Historical data are visible on the App. Heart Rate Monitor:

Click and show real-time heart rate. Auto test open on App. Intermittent automatic detection generate histogram, interval unit is 10 minutes. Historical data and analysis are visible on the App. Blood Oxygen Monitor:

Test the blood pressure. Historical data and analysis are visible on the App.

(Data cannot be used for medical purpose) Weather:

After connected with App, Show daily weather and next 4 days weather forecast. Sleep Monitor:

Record daily sleep time and deep or light sleep duration. History records are visible on the App. BT Music Control:

Remote control the music player of mobile phone, Play/

Pause/ Switch to previous or next song. Message:

Notifications push sync, show 8 latest messages on watch. Turn on/off SMS reminder and SNS App reminder on App. More:

Find Phone, Stopwatch, Timer. Settings:

Power off/ Reset/ Brightness

/Dial / App download/ About the watch. 05 Other functions Sedentary reminder, alarm clock reminder, low battery reminder, incoming call reminder, find watch, find hand Machine, online dial/custom dial, 12/24 time system, unit setting, wrist light up Screen, menstrual cycle reminder, goal achieve-

ment reminder. 06 Charging 1. Connect the charging cable to the charging port of the watch and make sure that the metal pins are fully connected. If the charging cable cannot be connected to the magnetic metal contacts of the watch, please turn the charging cable over to reconnect and charge. 2. Please use 5V 1A charging adapter to charge the watch. Note: If the smart watch cannot be turned on after a long period of non-use, or the smart watch cannot be charged, please check whether the charging metal pins of the watch are blocked by dirt, please clean it up and make sure the connection is good. 07 Warranty 1. When this product is in normal use, if it is caused by manufacturing, material, design, etc. Product quality problems from the beginning, from the date of purchase, the motherboard is guaranteed for free within one year.The battery and charger are guaranteed for half a year. 2. The free warranty is not provided for failures caused by the user's personal reasons, as follows:

1). Failure caused by unauthorized disassembly or modification of the watch. 2). Failure caused by accidental fall during use. 3), all man-made damages or due to the third party's fault, misuse (such as: water in the host, external shock Cracks, scratches on peripheral components, etc.) are not covered by the warranty. 3. When the user repairs the product, please contact us for warranty service. 4. All functions of the product are based on physical objects. Tips:

1. In order to ensure the waterproof performance of the product, please do not remove the screws on the back cover of the watch without authoriza-

tion,or soak in hot water, hot tea and other corrosive liquids. 2. This product contains lithium batteries. When recycling the product, please be sure to put it in the designated battery recycling point. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and

this device must accept any interference received, including interference that may cause undesired operation.

Warranty Certificate Client Info Product Type Vendor

(Stamp) Client Name Contact Info Vendors Contact Purchase Date Product IMEI Code Clients Address Vendors Address

Shenzhenshixinhaikejifazhanyouxiangongsi Agent Authorization Company: Shenzhenshixinhaikejifazhanyouxiangongsi Address: 3701, Block C, Building 1, Star River Legend Garden Phase I, Minzhi Street Longtang Community, Shenzhen Guangdong Province 518000 CN Product Name: SMART WATCH Model Number(s): SW06 Product Description: SMART WATCH We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2022-02-24 Name:

Wuzhao Huang Company: Shenzhenshixinhaikejifazhanyouxiangongsi

Shenzhenshixinhaikejifazhanyouxiangongsi Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022-02-24 Subject; Request for Confidentiality FCC ID: 2A4QK-SW06 To Whom It May Concern, Pursuant to the provisions of the Commission's rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market.

& Schematic Diagram Block Diagram LC] Parts List

&] Operational Description _] Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos C] Internal Photos User Manual C] For 45 days, pursuant to Public Notice DA 04-1705. OR

(0 For 180 days pursuant to KDB 726920 DO1. Itis our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Wypzhew H ue Sincerely Shenzhenshixinhaikejifazhanyouxiangongsi Contact person: Wuzhao Huang

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5712753.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case RF EXPOSURE EVALUATION 1. PRODUCT INFORMATION Product Description SMART WATCH Test Model SW06 FCC ID 2A4QK-SW06 2. EVALUATION METHOD According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances 50 mm are determined by:

[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] [f(GHz)] 3.0 for 1-g SAR and 7.5 for 10-g extremity SAR. Where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation 3. CALCULATION BLE Pt=4.714dBm=2.96mW The value of the Maximum output power Pt is referred to the test report of the CFR47 15.247. The result for RF exposure evaluation SAR=(2.96mW /5mm) .[2.480(GHz)]=0.93<3.0 for 1-g SAR and 7.5 for 10-g extremity SAR. 4. CONCLUSION The SAR evaluation is not required.