FCC ID: 2ACR9-TWIST Flic Twist with BLE

User Manual Flic Twist Contents Description and main features Getting started Connecting your Twist Bluetooth connection Sticking your Twist Cleaning the adhesive Changing the battery Factory reset Problems Compliance Handling the battery Safety usage guidelines Warranty Notice 1 2 3 4 5 6 7 8 9 9 10 11 12 13 Description and main features Flic Twist its simple and intuitive, wildly configurable and can be placed anywhere. Push and Rotate are easy to use and understand. Unlock advanced modes by pushing and rotating at the same time. Main Features 1. Smart Dimming Smart Dimming adapts intelligently to vivid color scenes or different volume settings. It adjusts each parameter individually, maintaining the relative differences between devices. 2. Advanced Dimming Advanced Dimming is a flexible dimming journey with custom triggers along the way. When rotating you can adjust brightness, color, or saturation simultaneously. Sequence the lights and even add events. 3. Scene Blender Flic Twist's innovative Scene Blender mode allows you to preset up to 4 different light scenes and blend seamlessly between them. 1 Getting started To get started make sure that you have:

1. 2. 3. 4. 5. An iOS or Android device with at least Bluetooth 4.0+

Active internet connection The Flic app, available on the App Store or Google Play A Flic Hub, Flic Hub LR or Flic Hub Mini (Flic Hub) A Flic Twist (Twist) For the up-to-date requirements and further information visit https://flic.io/start 2 Connecting your Twist 1. Plug in the Hub LR / Mini. Open the Flic App, create an account or login. Add or connect to your Flic Hub Follow the setup guide in the app to add your Twist. Now you are ready to set up your first actions. 2. Make sure Bluetooth is activated on your phone. 3. 4. 5. 6. 7. Do not held Flic Twist in hand when normal operating and please keep a separated distance at least 20cm. 3 Bluetooth Connection When setting the Twist up, make sure to connect to your Flic Hub using the Flic App in order to be able to add the Twist. Make sure that the Flic Twist is within Bluetooth range of the Flic Hub. The range is up to 50m (150ft), but can vary greatly depending on the environment. 4 Sticking your Twist Each Twist comes with a reusable adhesive sticker, pre-attached to the back. Simply peel off the protective layer and stick your Twist on any clean surface. If you want to change the position of your Twist, twist the button to the right in order to exert horizontal force which makes it easier to remove the adhesive from the surface. Note: consider that the adhesive is super strong before you stick it to any surface. Removing the adhesive might damage the surface attached. The Twist can also be mounted on the wall. Use the included magnetic wall mount and screw it. 5 Cleaning the adhesive If the adhesive starts to lose its stickiness then you can clean it. 1. Carefully wash the adhesive with water. 2. Give it a rub and repeat the wash. 3. Leave it to air-dry and it will return to full stickiness. The Twist is not waterproof. Do not expose it to rinsing water, submerge or attempt to use it underwater as this will result in irreversible damage that is outside the scope of the Shortcut Labs AB warranty. Do not apply solvents, chemicals, or abrasive cleaning products as this will damage the adhesive. 6 Changing the battery Flic Twist comes with two replaceable AAA batteries that last up to 2 years. To change the battery you will need to follow these steps:

1. Open the battery hatch by inserting a small, flat-headed screwdriver into the slot and gently bend upwards. 2. 3. Remove the old battery Place two new AAA batteries into the battery slots. Make sure to check the polarity with the printing inside the battery hatch. Dont mix used and new batteries. 4. Close the battery hatch. Note: Please dispose of old batteries according to local regulations. 7 Factory reset If, for any reason, you must perform a factory reset, perform the following steps:

1. Remove the battery, see the page Changing the battery. 2. 3. Within 5 seconds push and hold the button for 10 seconds. Insert the battery. This will remove all pairings and return the Twist to factory default. 8 Problems If you have any issues setting up or using the Flic products that are not answered here, please read FAQs at https://start.flic.io/faq Alternatively, you can contact us via https://flic.io/support Compliance Shortcut Labs declaration of conformity is available at https://flic.io/doc For full compliance, list visit https://flic.io/compliance Flic Twist is certified as FCC, IC, CE, AUS, R-NZ and WEEE, Prop 65 RoHS, REACH compliant. 9 Handling the battery The Twist has been designed with replaceable AAA batteries that last up to two years. Twist also supports rechargeable AAA batteries. The AAA battery contains a composition of alkaline, lithium or Ni-MH. For this reason, improper handling of the battery could lead to distortion, leakage, overheating, explosion or fire, causing personal injury. Please observe the following instructions to prevent accidents. Never swallow, heat, expose to open flame, moisture or liquid. Never attempt to disassemble, reverse the polarity or short circuit. Keep away from children and pets. Never charge non-rechargeable batteries. When disposing of used batteries please remove the battery in advance. If not possible, then dispose of the entire product in a waste bin for electronics as per the WEEE directive. Battery disposal may be regulated by national or local regulations, as such please follow applicable guidelines. 10 Safety usage guidelines The Twist is not a toy. It contains small parts and accessories that present a choking hazard. As such it is not suitable for children or pets. General

-Do not attempt to service the product.

-Do not use the product in temperatures below -10C or above +40 C.

-Clean with a damp cloth only. Do not submerge and do not use chemical or abrasive cleaning products. Flic specific

-Battery life will be shortened with heavy usage and/or use in extreme conditions.

-Flic Twist is not waterproof. Do not submerge or use in overly moist environments as this will result in irreversible damage that is outside the scope of the Shortcut Labs AB warranty. 11 Warranty Shortcut Labs AB warrants that your Flic hardware product (the product) will be free from defects in materials and workmanship for a period of 24 months from the date of delivery to the original retail purchaser

(the warranty period). repair or replace it with a new or refurbished product or If a defect in the product arises within the warranty period, Shortcut Labs will, at its sole option and subject to applicable laws:

(1) component; or

(2) product. refund the original purchase price upon return of the defective This warranty does not apply to products you purchase from unauthorized resellers, or where the instructions for use and activation of the product are not complied with or where the product is damaged as a result of abuse, accident, modification, moisture or other causes beyond our reasonable control. Note: Battery usage is regarded as normal wear and tear and is therefore not covered by the 24 month warranty. For detailed warranty information visit:

https://flic.io/warranty-and-return-policy 12 Notice Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/ TV technician for help. Caution Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)

(2) this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. Radio Frequency (RF) Exposure Warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Canada, Industry Canada (IC) Notices This device complies with Industry Canadas license-exempt RSSs. Operation is subject to the following two conditions:

(1)

(2) this device may not cause interference; and this device must accept any interference, including interference that may cause undesired operation of the device. Canada, avis d'Industry Canada (IC) Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1)

(2) susceptible d'en compromettre le fonctionnement. l'appareil ne doit pas produire de brouillage, et l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner that the potential for human contact during normal operation is minimized. This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions (antennas are greater than 20 cm from a person's body). Informations concernant l'exposition aux frquences radio (RF) La puissance de sortie mise par lappareil de sans fil est infrieure la limite d'exposition aux frquences radio d'Industrie Canada (IC). Utilisez lappareil de sans fil de faon minimiser les contacts humains lors du fonctionnement normal. Ce priphrique a galement t valu et dmontr conforme aux limites d'exposition aux RF d'IC dans des conditions d'exposition des appareils mobiles (antennes suprieures 20 cm partir du corps d'une personne). 13 Join us! https://community.flic.io/

Share your ideas with other Flic users and keep up to date with the latest news and happenings from the Flic team. Shortcut Labs AB, Drottning Kristinas Vg 41, 11428, Stockholm, Sweden 14

10010 20 3040 :

0 50 60 70 80 f=]

a oe oO. oO

oO ay 10 20 30 4 eae wu Ob 02, O \Ov OS 09 OZ 08 OB QOL 9! Oz 0 iT | cleat 02 0 OF 0s 09 Fat Hi Oz 0 oO Us 09 on uidlygiaifuyelivalivstiustunl \otttuil C UK cad &

FCC ID: 2ACR9 - TWIST IC: 12180A - TWIST Designed in Sweden Made in Malaysia Model/Medle:

Flic Twist

C5266091_X24_Ed.2 Shortcut Labs AB Attestation Statements TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules for covered telecommunications equipment and video surveillance equipment produced by entities identified on the Commissions Covered List1, which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) that prohibit equipment authorization Applicant Company name: Shortcut Labs AB Grantee code:

FCC ID:

Contact Name:

Address:

Telephone No:

Fax No:

Email:

i. 2ACR9 2ACR9-TWIST Amir Sharifat Drottning Kristinas Vag 41, 11428 Stockholm, Sweden

+46 735 06 03 93

amir@shortcutlabs.com

[Shortcut Labs AB] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification.

[Shortcut Labs AB] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing covered equipment. The applicant must sign this certification. ii.

[Shortcut Labs AB] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing covered equipment. Date: 2023/05/22 Applicants Name: Amir Sharifat Title: COO Signature 1 The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist 1/1

C5266091_X10_Ed.2 Shortcut Labs AB Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2ACR9-TWIST To Whom It May Concern, Date: 2023/04/10 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info L o n g - T e r m Confidentiality S h o r t - T e r m Confidentiality NOTE 2 Yes Yes Yes Yes Yes Yes Operational Description Yes Cover Letter(s) SDR Software / Security Info NOTE 1: Long-Term Conden3ality may be permi;ed under special condi3ons (See II. LONG-TERM CONFIDENTIALITY, Sec3on 3 of KDB 726920, use last in force) NOTE 2: Short-Term Conden3ality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description that are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitors an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. 1/1 C5266091_X10_Ed.2 It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those documents will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Amir Sharifat Title: COO 1/1

C5266091_X8_Ed.1 Shortcut Labs AB Letter of Authorization Company:

Shortcut Labs AB Address:

Drottning Kristinas Vag 41, 11428 Stockholm, Sweden Product Name:

Flic Twist Model Number: Flic Twist FCC Identifier:

2ACR9-TWIST We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Amir Sharifat Date: 2023/05/22 Title: COO Signature of applicant:

1/1

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6564209.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case JOC Australia Inc US Agent for Service of Process LETTER OF ATTESTATION TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process:

Company Name: JOC Australia Inc Physical U.S. Company Address: 18351 Colima Road Ste 585 Rowland Heights,California,91748 United States of America Agent contact name/Title : Benjamin. Smith / Vice President Agent Email Address: sales@jocinc.org/calvinsui001@gmail.com Tel No.: +1(626) 217 4778 FRN No.: 0033379421 This letter is to confirm that the US Agent for Service of Process accepts responsibility to act as a local representative on behalf of (Shortcut Labs AB). The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. Flic Twist with BLE Applicant:

Company name: Shortcut Labs AB Product Description:

Grantee code:

FCC ID:

Contact Name:

Address:

Telephone No:

Email:

2ACR9 2ACR9-TWIST Amir Sharifat Drottning Kristinas Vag 41, 11428 Stockholm, Sweden

+46 735 06 03 93 amir@shortcutlabs.com The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. Date: 2023/05/22 Applicants Name: Amir Sharifat Title: COO Signature US Agent for Service of Processs Name:

Benjamin.Smith Title: Vice President Signature 1/1