SLX-D SLX-D Digital Wireless PRELIMINARY USER GUIDE 2020 Shure Incorporated 00000000 (Preliminary Draft) Printed in China IMPORTANT SAFETY INSTRUCTIONS 1. READ these instructions. 2. KEEP these instructions. 3. HEED all warnings. 4. FOLLOW all instructions. 5. DO NOT use this apparatus near water. 6. CLEAN ONLY with dry cloth. 7. DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in accordance with the manufacturers instructions. 8. DO NOT install near any heat sources such as open flames, radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place any open flame sources on the product. 9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. ONLY USE attachments/accessories specified by the manufacturer. 12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. UNPLUG this apparatus during lightning storms or when unused for long periods of time. 14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the apparatus. 16. The MAINS plug or an appliance coupler shall remain readily operable. 17. The airborne noise of the Apparatus does not exceed 70dB (A). 18. Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection. 19. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 20. Do not attempt to modify this product. Doing so could result in personal injury and/or product failure. 21. Operate this product within its specified operating temperature range. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and mainte-
nance instructions in the literature accompanying this unit. WARNING Battery packs may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble, heat above 140F (60C), or incinerate. Follow instructions from manufacturer Only use Shure charger to recharge Shure rechargeable batteries WARNING: Danger of explosion if battery incorrectly replaced. Replace only with same or equivalent type. Never put batteries in mouth. If swallowed, contact your physician or local poison control center Do not short circuit; may cause burns or catch fire Do not charge or use battery packs other than Shure rechargeable batteries Dispose of battery packs properly. Check with local vendor for proper disposal of used battery packs. Batteries (battery pack or batteries installed) shall not be exposed to exces-
sive heat such as sunshine, fire or the like Important Product Information LICENSING INFORMATION Licensing: A ministerial license to operate this equipment may be required in cer-
tain areas. Consult your national authority for possible requirements. Changes or modifications not expressly approved by Shure Incorporated could void your au-
thority to operate the equipment. Licensing of Shure wireless microphone equip-
ment is the users responsibility, and licensability depends on the users classifi-
cation and application, and on the selected frequency. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies. Australia Warning for Wireless This device operates under an ACMA class licence and must comply with all the conditions of that licence including operating frequencies. Before 31 December 2014, this device will comply if it is operated in the 520-820 MHz frequency band. WARNING: After 31 December 2014, in order to comply, this device must not be operated in the 694-820 MHz band. Canada Warning for Wireless This device operates on a no-protection, no-interference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio licence is required. For further details, consult Innovation, Science and Economic Development Canadas document Client Procedures Circular CPC-2-1-28, Voluntary Licensing of Licence-Exempt Low-Power Radio Apparatus in the TV Bands. Ce dispositif fonctionne selon un rgime de non-brouillage et de non-protection. Si lutilisateur devait chercher obtenir une certaine protection contre dautres services radio fonctionnant dans les mmes bandes de tlvision, une licence ra-
dio serait requise. Pour en savoir plus, veuillez consulter la Circulaire des proc-
dures concernant les clients CPC-2-1-28, Dlivrance de licences sur une base volontaire pour les appareils radio de faible puissance exempts de licence et ex-
ploits dans les bandes de tlvision dInnovation, Sciences et Dveloppement conomique Canada. receiver 1 IR exit sync push IR receiver 2 exit sync exit sync push push SLXD
System Components All systems include:
Rack mounting hardware
-wave antennas (2) Power supply AA batteries (2) SLXD4 or SLXD4D receiver Guitar system includes:
" to mini 4-pin guitar cable SLXD1 bodypack transmitter Vocal system includes:
Microphone clip SLXD2 handheld transmitter with microphone cartridge
(choice of SM58, SM86, Beta 58A, Beta 87A, or Beta 87C) Lavalier, Headworn, and Instrument systems include bodypack transmitter () and one of the following:
WL93 miniature lavalier microphone WL183/WL185/ML4 lavalier microphone SM35 headset microphone Beta 98H/C instrument microphone MX153 earset headworn microphone Combo system includes:
Handheld transmitter with SM58 microphone head WL185 Set Up the Receiver 1. Attach the included antennas to the back of the receiver. 3. Connect the audio output to an amplifier or mixer. antenna B antenna A inst / aux 45 2. Connect the power supply to the receiver and plug the cord into an AC power source. 15V 0.6A power 4. Press the power button on the receiver. Use the menu to set the system to microphone (mic) or instrument (line) level as appropriate. IR exit sync push Install Transmitter Batteries Bodypack:
1. Push the tab up and open the battery door to access the battery compartment 2. Place a Shure SB903 Li-ion rechargeable battery or 2 AA batteries in the compartment 3. Close the battery door Handheld:
1. Turn the battery cover clockwise to access the battery compartment 2. Lift the battery door to open the battery compartment 3. Place a Shure SB903 Li-ion rechargeable battery or 2 AA batteries in the compartment 4. Replace the battery cover and turn it counterclockwise to secure it 1 antenna Bantenna Ainst / auxantenna Bantenna Ainst / auxantenna Binst / aux12V OUT150 mA12V OUT150 mA15V 0.6AlinemicULXD4www.shure.compowermic / lineinst / auxantenna . Bantenna . A150 mA What are Groups and Channels?
To minimize interference, Shure wireless systems organize the RF band into predefined groups and channels. A group is a set of compatible frequencies within a frequency band. A single frequency within a group is a channel. Tune a receiver and transmitter to the best available channel within its group to set up your system. To ensure compatibility, all receivers in the same band should be set to the same group. You can configure this manually, or use the Guided Frequency Setup to walk you through the process of finding an optimal configuration. For best results, use a network switch when connecting 3 or more receivers. Important! To avoid interference, before you begin:
Turn off all transmitters for the systems you are setting up. This prevents them from interfering with the frequency scan. Turn on the following devices so they are operating as they would be during the presentation or performance. This will allow the scan to detect and avoid any interference from these devices:
Configured wireless systems or devices Computers Large LED panels Effects processors CD players Using the Guided Frequency Setup Set up a new system:
1. Push the control knob and select 1. Frequency Setup
> 1.1 Guided Frequency Setup. 2. Select Initialize My System and push the control knob to continue. 3. Turn off all transmitters you plan to use with your system. 4. Select start scan. 5. After the scan is done, push the control knob to assign frequencies to the receiver. 6. Turn on the transmitter you plan to use with this receiver. LDMT DMSDQ SLXD
7. Align the infrared (IR) ports on the transmitter and receiver, and push the sync button. Add a new receiver to your system:
1. Push the control knob and select Frequency Setup > Guided Frequency Setup. 2. Select Add Receiver to My System. 3. To change the group, rotate the control knob to select G:, push to select, rotate to change the number, push again to confirm. 4. Select start scan. 5. After the scan completes, push the control knob to apply the receiver channel. 6. Turn on the transmitter you plan to use with this receiver. 7. Align the infrared (IR) port on the transmitter with that on the receiver, and push the sync button. 8. Once the sync is complete, the system is ready for use. Manual Frequency Selection To manually adjust group, channel or frequency:
1. Select 1. Frequency Setup > 1.4 Manual Frequency Setup from the receiver menu. 2. Use the control knob to select and adjust the group
(G), channel (C), or frequency (MHz). 3. Select apply and push the control knob to save. Sound Check and Gain Adjustment Navigate to the receiver's Gain screen to test the transmitter at performance levels. Adjust the gain to keep the audio indicator within the horizontal bracket above the bar. Reduce the gain if there is audible distortion of the audio. IR IR Port exit sync push GAIN AUDIO 12 dB 8. Once the sync is complete, the system is ready for use. 2 Frequencies for European Countries G51 470-534 MHz Country Code Code de Pays Codice di paese Cdigo de pas Lnder-Krzel A, B, BG, CH, CY, CZ, D, DK, EST, F FIN, GB, GR, H, HR, I, IRL, IS, L, LT M, N, NL, P, PL, RO, S, SK, SLO, TR All other countries Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information. H51 534-598 MHz Country Code Code de Pays Codice di paese Cdigo de pas Lnder-Krzel A, B, BG, CH, CY, CZ, D, EST F, GB, GR, H, I, IS, L, LT NL, P, PL, S, SK, SLO DK, FIN, M, N HR, E, IRL, LV, RO, TR All other countries Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich 534 - 598 MHz*
534 - 598 MHz*
534 - 598 MHz*
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information. K51 606-670 MHz Country Code Code de Pays Codice di paese Cdigo de pas Lnder-Krzel A, B, BG, CH, CY, CZ, D, EST F, GB, GR, H, I, IS, L, LT NL, P, PL, S, SK, SLO RO DK, E, FIN, HR, IRL, LV, M, N, TR All other countries Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich 606 - 670 MHz*
606 - 670 MHz*
606 - 670 MHz*
646 - 647; 654 - 655; 662 - 663 MHz*
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information. L52 632-694 MHz Country Code Code de Pays Codice di paese Cdigo de pas Lnder-Krzel A, B, BG, CH, CY, CZ, D, DK, EST, F FIN, GB, GR, H, HR, I, IRL, IS, L, LT M, N, NL, P, PL, RO, S, SK, SLO, TR All other countries Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information. P51 710-782 MHz Country Code Code de Pays Codice di paese Cdigo de pas Lnder-Krzel A, B, BG, CH, CY, CZ, D, EST, F, GB GR, H, I, IS, L, LT, NL, P, PL, S, SK, SLO RO DK, E, FIN, HR, IRL, LV, M, N, TR All other countries Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich 710 - 782 MHz*
710 - 782 MHz*
718 - 719; 726 - 727; 734 - 743; 750 - 751; 758 - 759 MHz*
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information. Q51 794-806 MHz Country Code Code de Pays Codice di paese Cdigo de pas Lnder-Krzel A, B, BG, CH, CY, CZ, D, DK, E, EST F, FIN, GB, GR, H, HR, I, IRL, IS, L, LT LV, M, N, NL, P, PL, S, SK, SLO, TR All other countries Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information. R51 800-810 MHz Country Code Code de Pays Codice di paese Cdigo de pas Lnder-Krzel N A, B, BG, CH, CY, CZ, D, DK, E, EST F, FIN, GB, GR, H, HR, I, IRL, IS, L, LT LV, M, N, NL, P, PL, S, SK, SLO, TR All other countries Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich 800 - 810 MHz*
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information. S50 823-832 MHz, 863-865 MHz Country Code Code de Pays Codice di paese Cdigo de pas Lnder-Krzel D A, B, BG, CH, CY, CZ, D, DK, EST, F FIN, GB, GR, H, HR, I, IRL, IS, L, LT M, N, NL, P, PL, RO, S, SK, SLO, TR 863 - 865 MHz All other countries Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich license free
EU: license free
SLXD1 Dipole Antenna Antenna Gain Frequency Bands G58 G59 G60 G61 Bands G62 H55 H56 H57 J52 J53 J54 Bands K59 L55 L56 L57 L58 L59 Bands M55 P53 Q51 JB Bands S50 X51 2.8 2.7 2.6 2.1 2.7 510MHz 530MHz 630MHz 750MHz 930MHz SLXD2
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information. Dipole Antenna Antenna Gain Frequency V51 174-216 MHz Country Code Code de Pays Codice di paese Cdigo de pas Lnder-Krzel A, B, BG, CH, CY, CZ, D, DK, E, EST F, FIN, GB, GR, H, HR, I, IRL, IS, L, LT Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich
Bands G58 G59 G60 G61 Bands G62 H55 H56 H57 Bands J52 J53 J54 Bands K59 L55 L56 L57 L58 L59 Bands M55 P53 Q51 JB Bands S50 X51 2.2 1.2 0.1
-0.8 0.4
-0.9 510MHz 530MHz 570MHz 690MHz 710MHz 930MHz Hereby, Shure Incorporated declares that the radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.shure.com/europe/compliance Authorized European representative:
Shure Europe GmbH Headquarters Europe, Middle East & Africa Department: EMEA Approval Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone: +49-7262-92 49 0 Fax: +49-7262-92 49 11 4 Email: EMEAsupport@shure.de Information to the user This device complies with part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device operates on frequencies shared with other devices. Consult the Federal Communications Commission White Space Database Administration website to de-
termine available channels in your area prior to operation. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est con-
forme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. Lappareil ne doit pas produire de brouillage;
2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Country Code Code de Pays Codice di paese Cdigo de pas Lnder-Krzel LV, M, N, NL, P, PL, S, SK, SLO, TR All other countries Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information. Z17 1492-1525 MHz Country Code Code de Pays Codice di paese Cdigo de pas Lnder-Krzel A, B, BG, CH, CY, CZ, D, DK, E, EST F, FIN, GB, GR, H, HR, I, IRL, IS, L, LT LV, M, N, NL, P, PL, S, SK, SLO, TR This Wireless microphone operates on the range of 1492-1525 MHz. Should be used INDOORS ONLY.
Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich
All other countries
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information. Z18 1785-1805 MHz Country Code Code de Pays Codice di paese Cdigo de pas Lnder-Krzel A, B, BG, CH, CY, CZ, D, DK, E, EST F, FIN, GB, GR, H, HR, I, IRL, IS, L, LT LV, M , N, NL, P, PL, S, SK, SLO, TR All other countries Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information. Certifications Certified under FCC Part 15 and FCC Part 74. Certified by ISED in Canada under RSS-102 and RSS-210. CAN ICES-3 (B)/NMB-3 (B) Approved under the Declaration of Conformity (DoC) provision of FCC Part 15. These transmitters have been tested and found to comply with international radiation exposure limits set forth for an uncontrolled environment. This equipment is in direct contact with the body of the user under normal operating conditions. These transmit-
ters must not be co-located or operating in conjunction with any other antenna or transmitter. FCC ID: DD4SLXD1G58, DD4SLXD1H55, DD4SLXD1J52, DD4SLXD2G58, DD4SLXD2H55, DD4SLXD2J52. IC: 616A-SLXD1G58, 616A-SLXD1H55, 616A-SLXD1J52, 616A-SLXD2G58, 616A-SLXD1H55, 616A-SLXD1J52 . Meets essential requirements of the following European Directives:
WEEE Directive 2012/19/EU, as amended by 2008/34/EC RoHS Directive EU 2015/863 Note: Please follow your regional recycling scheme for batteries and electronic waste This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking. Europe, Middle East, Africa:
UK Importer PT. GOSHEN SWARA INDONESIA Kompleks Harco Mangga Dua Blok L No. 35 Jakarta Pusat I.16.GSI31.00501.0211