all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Exhibit D Users Manual per 2 1033 c3 | Users Manual | 2.82 MiB | ||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Exhibit B Operational Description per 2 1033 c 4 5 6 7 8 9 13 | Operational Description | February 21 2019 | confidential | ||||
1 2 | Exhibit B Schematics per 2 1033 c10 | Schematics | February 21 2019 | confidential | ||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | Test Report | |||||||
1 2 | Misc Tune Up Procedure Exhibits | Parts List/Tune Up Info | February 21 2019 | confidential | ||||
1 2 | OET Tracking 381569 Procedure | Operational Description | February 21 2019 | confidential | ||||
1 2 | RF Exposure Info |
1 2 | Exhibit D Users Manual per 2 1033 c3 | Users Manual | 2.82 MiB |
PSM1000 For Placement Only Personal Monitor Wireless System Guide de lutilisation du systme de retour personnel Personal Monitor System Bedienungsanleitung Gua del usuario del sistema de monitoreo personal Guida alluso del sistema di monitoraggio personale Manual do Usurio do Sistema de Monitorao Pessoal 2010 Shure Incorporated Printed in U.S.A. 27A14811 (Rev. 1) IMPORTANT SAFETY INSTRUCTIONS 1. READ these instructions. 2. KEEP these instructions. 3. HEED all warnings. 4. FOLLOW all instructions. 5. DO NOT use this apparatus near water. 6. CLEAN ONLY with dry cloth. 7. DO NOT block any ventilation openings. Install in accordance with the manufacturers instructions. 8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli ers) that produce heat. 9. DO NOT defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet. 10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. ONLY USE attachments/accessories speci ed by the manufacturer. 12. 13. UNPLUG this apparatus during lightning storms or when unused for long periods of time. 14. REFER all servicing to quali ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects lled with liquids, such as vases, on the appara-
tus. 16. The MAINS plug or an appliance coupler shall remain readily oper-
able. 17. The airborne noise of the Apparatus does not exceed 70dB (A). 18. Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection. 19. To reduce the risk of re or electric shock, do not expose this ap-
paratus to rain or moisture. 20. Do not attempt to modify this product. Doing so could result in personal injury and/or product failure. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. USE only with a cart, stand, tripod, bracket, or table speci-
ed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. Keep the microphone dry and avoid exposure to extreme temperatures Keinen extremen Krften aussetzen und nicht am Kabel ziehen, da dies zu WARNING!
DAMAGE. LISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING USE AS LOW A VOLUME AS POSSIBLE. Over exposure to excessive sound levels can damage your ears resulting in permanent noise-
induced hearing loss (NIHL). Please use the following guidelines established by the Occupational Safety Health Administration (OSHA) on maximum time exposure to sound pressure levels before hearing damage occurs. 90 dB SPL at 8 hours 110 dB SPL at hour 95 dB SPL at 4 hours 115 dB SPL at 15 minutes 100 dB SPL at 2 hours 105 dB SPL at 1 hour 120 dB SPL Avoid or damage may occur SAFETY PRECAUTIONS The possible results of incorrect use are marked by one of the two symbols
- WARNING AND CAUTION - depending on the imminence of the danger and the severity of the damage. WARNING: Ignoring these warnings may cause severe injury or death as a result of incorrect operation. CAUTION: Ignoring these cautions may cause moderate injury or prop-
erty damage as a result of incorrect operation. WARNING If water or other foreign objects enter the inside of the device, fire or electric shock may result. Do not attempt to modify this product. Doing so could result in personal injury and/or product failure. WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm CAUTION Never disassemble or modify the device, as failures may result. Do not subject to extreme force and do not pull on the cable or failures may result. and humidity. ADVERTENCIA POSIBLE. EL ESCUCHAR REPRODUCCIONES DE AUDIO A NIVELES EXCESIVOS DE VOLUMEN PUEDE CAUSAR DAOS PERMANENTES AL OIDO. USE EL VOLUMEN MAS BAJO La exposicin prolongada a niveles sonoros excesivamente intensos puede daar los odos y causar una prdida permanente del odo causada por ruidos. Respete los lineamientos dados a continuacin, los cuales fueron establecidos por la Administracin de Salud y Seguridad Ocupacional (OSHA) de los EE.UU. e indican el tiempo mximo que puede escucharse un nivel determinado de presin sonora (SPL) antes de producirse daos al odo. 90 dB SPL por 8 horas 110 dB SPL por 1/2 hora 95 dB SPL por 4 horas 115 dB SPL por 15 minutos 100 dB SPL por 2 horas 105 dB SPL por 1 hora 120 dB SPL Evtese por completo, puesto que puede causar daos inmediatos PRECAUCIONES DE SEGURIDAD Los posibles resultados del uso incorrecto de este producto se denotan por medio de uno de dos smbolos - ADVERTENCIA y PRECAUCION - segn la inminencia del peligro y el grado de severidad de los daos. ADVERTENCIA: Si se pasan por alto estas advertencias se podra causar lesiones graves o mortales como resultado del uso incorrecto. PRECAUCION: Si se pasan por alto estas precauciones se podra causar lesiones moderadas y daos a la propiedad como resultado del uso incorrecto. ADVERTENCIA Si el agua u otros objetos extraos penetran el dispositivo, se podra causar un incendio o sacudidas elctricas. No intente modificar este producto. Hacerlo podra causar lesiones personales y/o la falla del producto. PRECAUCION Nunca desarme ni modifique el dispositivo, ya que esto podra causar fallas. No someta el aparato a fuerzas extremas ni tire de su cable, ya que esto Mantenga el micrfono seco y evite exponer el aparato a niveles extremos de podra causar fallas. temperatura y humedad. ACHTUNG!
MGLICHST GERINGE LAUTSTRKEPEGEL VERWENDEN. Lngerfristiges Hren bei bermigen Schallpegeln kann zu Hrschden und zu permanentem, durch Lrm verursachten Gehrverlust fhren. Bitte orientieren Sie sich an den folgenden von der Occupational Safety Health Administration (OSHA; US-
Arbeitsschutzbehrde) erstellten Richtlinien fr die maximale zeitliche Belastung durch Schalldruckpegel, bevor es zu Hrschden kommt. bei 90 dB Schalldruckpegel max. 8 Stunden bei 110 dB Schalldruckpegel max. Stunde bei 95 dB Schalldruckpegel max. 4 Stunden bei 115 dB Schalldruckpegel max. 15 Minuten bei 100 dB Schalldruckpegel max. 2 Stunden bei 105 dB Schalldruckpegel max. 1 Stunde 120 dB Schalldruckpegel vermeiden; ansonsten knnen Schden auftreten SICHERHEITSVORKEHRUNGEN Die mglichen Folgen des fehlerhaften Gebrauchs, die durch eines der beiden Symbole - ACHTUNG und VORSICHT - markiert sind, hngen von der Unmittelbarkeit der bevorstehenden Gefahr und des Schweregrads der Beschdigung ab. ACHTUNG: Die Nichtbeachtung dieser Warnhinweise kann schwere oder tdliche Verletzungen infolge des fehlerhaften Gebrauchs verursachen. VORSICHT: Die Nichtbeachtung dieser Vorsichtshinweise kann mittel-
schwere Verletzungen oder Sachschden infolge des fehlerhaften Gebrauchs verursachen. ACHTUNG Falls Wasser oder andere Fremdstoffe/-krper in das Gert gelangen, kann es zu Brnden oder Stromschlgen kommen. Nicht versuchen, dieses Produkt zu modifizieren. Ansonsten knnte es zu Verletzungen und/oder zum Produktausfall kommen. VORSICHT Das Gert nie auseinanderbauen oder modifizieren, da dies zu Ausfllen fhren kann. Ausfllen fhren kann. Das Mikrofon trocken halten und keinen extremen Temperaturen oder extremer Luftfeuchtigkeit aussetzen. AVERTISSEMENT !
L'COUTE AUDIO UN VOLUME SONORE EXCESSIF PEUT CAUSER DES LSIONS AUDITIVES PERMANENTES. RGLER LE VOLUME LE PLUS BAS POSSIBLE. Une surexposition des volumes sonores excessifs peut causer des lsions aux oreilles entranant une perte auditive permanente due au bruit. Se conformer aux directives ci-dessous, tablies par l'Occupational Safety Health Administration (OSHA) pour les limites de dure d'exposition aux pressions acoustiques (SPL) avant de risquer des lsions auditives. SPL de 90 dB pendant 8 heures SPL de 110 dB pen-
dant 1/2 heure SPL de 95 dB pendant 4 heures SPL de 115 dB pendant 15 minutes SPL de 100 dB pendant 2 heures SPL de 120 dB viter : risque de lsions auditives SPL de 105 dB pendant 1 heure PRCAUTIONS DE SCURIT Les rsultats possibles d'une utilisation incorrecte sont signals par l'un des deux symboles - AVERTISSEMENT et ATTENTION - selon l'imminence du danger et la svrit des dommages. AVERTISSEMENT : L'ignorance de ces avertissements peut causer des blessures graves ou la mort suite une utilisation incorrecte. ATTENTION: L'ignorance de ces mises en garde peut causer des bles-
sures modres ou des dgts matriels suite une utilisation incorrecte. AVERTISSEMENT Si de l'eau ou autres matriaux trangers pntrent dans l'appareil, il y a risque d'incendie ou de choc lectrique. Ne pas essayer de modifier ce produit. Une telle opration est susceptible d'entraner des blessures ou la dfaillance du produit. ATTENTION Ne jamais dsassembler ou modifier cet appareil sous peine de provoquer des dfaillances. Ne pas soumettre le cble des forces extrmes et ne pas tirer dessus sous peine de provoquer des dfaillances. Maintenir le microphone sec et viter de l'exposer des tempratures extrmes et l'humidit. iii
(OSHA)
(). 90 8 110 1/2 95 4 115 15 100 2 105 1 120
. AVVERTENZA L'ASCOLTO A VOLUME ECCESSIVAMENTE ELEVATO PU DANNEGGIARE L'UDITO IN MODO PERMANENTE. MANTENETE IL VOLUME AL PI BASSO LIVELLO POSSIBILE. La sovraesposizione a livelli sonori eccessivi pu danneggiare l'udito provocando una perdita di udito permanente causata dal rumore. Si consiglia di attenersi alle seguenti direttive stabilite dalla OSHA (Occupational Safety Health Administration) sul tempo massimo di esposizione a vari livelli di pressione sonora (SPL), oltre il quale si rischia di causare lesioni all'apparato uditivo. 90 dB di SPL per 8 ore 110 dB di SPL per mezz'ora 95 dB di SPL per 4 ore 115 dB di SPL per 15 minuti 100 dB SPL per 2 ore 105 dB di SPL per 1 ora 120 dB di SPL Evitate l'esposizione per non rischiare di danneggiare l'udito PRECAUZIONI DI SICUREZZA I possibili effetti di un uso errato sono contrassegnati da uno dei due simboli
- AVVERTIMENTO E ATTENZIONE a seconda dell'incombenza del peri-
colo e della gravit del danno. AVVERTIMENTO: come conseguenza di un funzionamento errato, ignorare questi messaggi pu comportare lesioni personali gravi o mortali. ATTENZIONE: come conseguenza di un funzionamento errato, ignorare questi messaggi pu comportare lesioni personali di media gravit o danni alla cose. AVVERTIMENTO:
L'eventuale introduzione di acqua o di altri corpi estranei nel dispositivo pu dare luogo Non tentate di modificare il prodotto. Tale operazione pu causare infortuni e/o il guasto allo sviluppo di incendi o a folgorazione. del prodotto stesso. ATTENZIONE Per evitare di provocare possibili danni, non smontate n modificate il dispositivo. Per evitare di provocare possibili danni, non applicate una forza estrema sul cavo e Mantenete il prodotto asciutto e non esponetelo a temperature estreme ed all'umidit. non tiratelo. ATENO!
OUVIR O SOM COM VOLUME MUITO ALTO PODE CAUSAR DANOS PERMANENTES AUDIO. USE O VOLUME MAIS BAIXO POSSVEL. A exposio a sons excessivamente altos pode danificar os ouvidos e resultar em perda permanente da audio devido ao rudo. Siga as recomendaes estipuladas pela Administrao de Sade e Segurana do Trabalho dos E.U.A. (U.S. Occupational Safety Health Administration-OSHA) sobre o mximo tempo de exposio a determinados nveis de presso sonora (SPL) a fim de evitar danos audio. 100 dB SPL por 2 horas 105 dB SPL por 1 hora 95 dB SPL por 4 horas 115 dB SPL por 15 minutos 90 dB SPL por 8 horas 110 dB SPL por hora MEDIDAS DE SEGURANA Os possveis resultados do uso incorreto so marcados por um de dois smbolos
- ATENO e CUIDADO - dependendo da iminncia do perigo e da severidade do dano. Evite ou poder ocorrer dano 120 dB SPL TENO: No seguir esses avisos de ateno pode causar leso grave ou morte em conseqncia da operao incorreta. CUIDADO: No seguir esses avisos de cuidado pode causar leso mod-
erada ou danos propriedade em conseqncia da operao incorreta. ATENO Incndio ou choque eltrico pode ocorrer caso gua ou objetos estranhos entrem no dispositivo No tente modificar este produto. pois pode resultar em leso pessoal e/ou falha do produto. No desmonte ou modifique o dispositivo uma vez que pode resultar em falhas. No sujeite fora demasiada e no puxe o cabo pois pode resultar em falhas. Mantenha o microfone seco e evite expor a temperaturas extremas e umidade. CUIDADO iv PSM1000 The PSM1000 Personal Monitor System from Shure brings personal monitoring to its most advanced level yet. The full-rack, dual-channel, networked trans-
mitter is ideally suited for the demands of elite-level professional touring and installation applications, and the diversity bodypack receiver delivers pristine RF signal and audio quality. Networkability over Ethernet connection enables remote control of transmitter functions and comprehensive frequency coordination via Wireless Workbench software. Features Advanced Setup and Operation Visual display of scan plotting in a rich graphical environment Remote control of transmitter settings Directly update firmware with WWB through software update Touring-Grade Performance Full rack, dual channel transmitter in a rugged, professional chassis Twin-antenna diversity bodypack virtually eliminates drop-outs from RF mute enable/disable RF output power adjustments Aux/line level Audio input level Channel/device name edit Internal power supply with IEC in/out ports enables easy power chaining CueMode allows monitoring of different stage mixes and storing of up to Precision front-end RF filtering reduces RF interference for a cleaner, 20 separate channels on one bodypack for quick and easy reference. stronger RF signal, fewer dropouts, and less audible artifacts. interference in the rack Backwards compatibility with PSM900 receivers for simplified inventory management Components P10T: Rack mount Transmitter P10R: Bodypack Receiver Two 1/2 Wave Antennas AA Batteries (2) Two Antenna Cables IEC Power Cable and IEC Extension Cable Ethernet Network Cable Wireless Workbench Software Zippered Bag Rack mount supplies 2 antenna hole plugs 4 rack mount screws with washers L R 1 Quickstart Instructions Rack mount Transmitter 1. Connect to a power outlet using the supplied power cable. 2. Attach the supplied antennas to the ANTENNA OUT BNC connectors. 3. Connect the audio source, such as the output of a mixer, to the audio inputs. You can use both input jacks or choose either one for a mono source. 4. Switch off RF and power on. 5. For mono (one input), access the AUDIO menu and select MONO. 6. Set the input sensitivity to match the source by selecting AUDIO
> INPUT from the LCD configuration menu: AUX10dBV or LINE+4dBu. 7. Adjust the audio source level so that, for the average input sig-
nal level, the top two yellow LEDs flicker and the lower LEDs are solid. If the red clip LED illuminates and a warning appears on the LCD, the inputs are overdriven. Decrease the level by entering the AUDIO menu and using the control wheel to change the input sensitivity to +4 dBu. If the signal level is too low, change the input sensitivity to 10 dBV. Pay no attention to these, they are placeholders...new illustra-
tions to follow... Bodypack Open by pressing the latches on both sides and pulling. Insert the bat-
teries or battery pack and attach antennas. Turn on using the volume knob. The battery light illuminates. fix polarity of battery Home Screen on Bpack.. Scan and Sync 1. On the bodypack, press the scan button. The display flashes SYNC NOW.... 2. Align the IR windows on the bodypack and rack unit, and press the sync button on the transmitter. The IR window on the transmitter illuminates. Press the sync button again. The rack unit level LEDs flash, and it displays SYNC SUCCESS. 3. Turn the RF switch on. The blue RF LED illuminates on the bodypack to indicate that it is detecting the transmitter. The bodypack also displays the RF signal strength (RF). 4. IMPORTANT: Turn bodypack volume down before plugging in earphones. 5. Insert the earphones and slowly turn up the volume. AA new illustration to follow 2 P10T Rack Mount Transmitter L R Front Panel Controls Sync Window Align bodypack IR window with sync window on TX. RF Switch Mutes RF output. For setting up multiple systems or adjusting settings without transmitting unwanted RF or audio signals. Audio Indicators Use the control wheel to adjust the audio so that, for the average input signal level, the top two yellow LEDs flicker and the lower LEDs are solid. Press the enter button to save the value, exit to cancel. The red clip LED indicates the inputs are over driven. Reduce the level at the audio source or change the input sensitivity of the rack unit from the AUDIO>INPUT menu. Status Display and Controls Use the navigation buttons to access the configuration menu. Push the control wheel to move the cursor to the next item. Turn the control wheel to change a parameterthe enter button flashes. Press it to save the value. Press the exit button to cancel changes and return to the previous menu. Headphone Monitoring The monitor control adjusts signal output to the 3.5 mm headphone jack. Push button to toggle between transmitters. Monitor clip LED indicates headphone audio is clipping. Power Switch Turns the unit on and off. Power switch and front panel can be locked from the utilities menu. supply AC power to another device. Unswitched. Rear Panel Connectors Primary Side Switch Primary power switch, only front power switch can be locked from utilities menu. Power AC mains power input, IEC Connector 100-240 Vac. AC mains power pass-through Use with an IEC extension cable to Antenna (BNC) port Attach supplied antennas. If you are rack mounting, use a front panel or remote mounting kit from Shure. LOOP OUT Sends audio signal going into the transmitter to another device. See LOOP Applications. Audio Inputs Connect to balanced or unbalanced outputs. Use either Ethernet Jack Accepts an RJ-45 jack for Ethernet network interface. Two port Ethernet switch for networking multiple units. connector for mono input. Accepts XLR or 6.35 mm (1/4) TRS photos for placement only new illustrations to come... 3 Menu Structure and Navigation The home menu screen displays a summary of transmitter parameters and available menu choices. Depending on configuration, the home screen will display the following information:
New illustration to come... Menu Navigation RADIO G CH 888.888MHz RF POWER Custom Load Clear Next Transmitter Parameters
- Audio channel name
- Frequency setting
- Group and Channel
- Network Icon
-Lock Icon
- RF Power Level
- Audio Level
- Mix -mono or stereo
- Aux/Line in
- Submenus
- TV Channel Radio - RF Settings RADIO - Displays RF settings G - Sets the group number - a set of compatible frequency channels CH - Sets the channel number - within the group 888.888MHz - Frequency selection; adjustable in increments of 1MHz or kHz RF POWER - Select from 10, 50, or 100 mW (varies by region) Custom - For creating custom frequency groups Load - Searches network for custom groups and loads devices found Clear - Clears custom groups Next - Displays channel and frequency of groups AUDIO INPUT MODE LEVEL Line Aux stereo/mix mono PTP Audio Settings INPUT - Sets nominal input level LINE +4 dBu - line level AUX 10dBV - aux level MODE - Selects monitor mode LEVEL - Adjusts output level STEREO/MX - Transmits both channels MONO - Transmits a mono signal to bodypack POINT TO POINT - Set up P10T for point to point wireless audio
(see Point to Point section of guide) 4 UTIL CHANNEL NAME DISPLAY High Med Low Brightness Disp. Invert Contrast LOCK Power Switch Front Panel NETWORK DEVICE SETUP Mode Automatic Reset Manual IP SUB MAC Find All Flash All Flash Show Info Back MORE Product ID Serial Number Reset All Restores all values to factory defaults FW Update Updates Firmware of Receiver SYNC Lock V Lim Lim Val Hi Boost Mode Bal Mx Bal St Spectrum Sync Scan Deploy Cursor Zoom Sync Retry OK Front Panel and Power Switch - Turn control wheel to select off or locked. Utility Settings CHANNEL NAME - Changes the name on the LCD display (this name is uploaded to the bodypack with sync) Use control wheel to change letters. DISPLAY - Changes the display format Brightness - Adjusts brightness to high, medium or low Disp. Invert - Inverts display Contrast - Changes the display contrast LOCK - Locks power switch and front panel controls. NETWORK - Network set-up displays all networked and linked devices DEVICE - Turn control wheel to change device ID name SETUP - MODE - Set TX to manual or automatic Automatic - Automatic - press flashing Enter button Manual - Manually adjust IP, Subnet, MAC - view only Reset - Resets all devices to factory default and deletes all previous settings FIND ALL - Displays all devices on network Show - Flashes LEDS of all devices on network Info - Displays TX information Back - Returns to previous screen MORE - Displays product ID, resets and current firmware Product ID - Displays Product serial number Reset All - Restores all values on all devices on the network to factory default settings FW Update - Sends updated firmware to receiver Sync Settings RX SETUP - These settings are sent to the bodypack during a sync (when the sync direction is from the transmitter). The default NO CHANGE parameter will not change the bodypack settings. Use control knob and exit/
enter buttons to change these settings. LOCK - Lock bodypack V LIMIT - Volume limit on/off LIM VAL - Volume limit value HIBOOST - High frequency boost MODE - Stereo (ST) or MixMode (MX) BAL MX - CH. 1 (L) and CH. 2 (R) mix for MixMode BAL ST - Left (L) and right (R) balance for stereo mode Spectrum After running a full spectrum scan on the RX, the RF data can be viewed in Sync Scan and deployed from the TX. Deploy - Sends open frequencies to available TX Cursor - Control cursor with control wheel to select open frequencies Zoom - Turn control wheel to zoom into graphic Retry - Retry at a different time OK - Successful sync of TX and RX 5 P10R Bodypack Receiver Audio Settings AUDIO MODE HIBOOST V Limit Gain Stereo MixMode Selects monitor mode STEREO MIXMODE High-frequency EQ boost OFF flat 4 dB
+4 dB @ 10 kHz 2 dB
+2 dB @ 10 kHz ON Limits volume level Value 39: analogous to volume knob position (for example, 5 is equal to the 5th dot on the volume knob) Hi mode increases gain by 10 dB HI/Standard Bodypack Receiver Power Switch and Volume Control Turns the bodypack on and off and adjusts earphone volume. 3.5 mm Earphone Jack Insert earphones here. Scan Button Press the scan button to find an available frequency. Press and hold for two seconds to find the group with the most available channels. IR Window For transmitting settings between bodypack and rack unit. Battery Compartment Requires 2 AA batteries or rechargeable battery. Open by pressing the latches on both sides and pulling. Menu buttons Use in conjunction with the buttons to access the con-
figuration menus. Buttons Use to adjust the audio mix (in MixMode only), or in con-
junction with the menu buttons to change settings. LCD Screen Displays current settings and menus. Tri-Color Battery LED illuminates green, amber, or red to indicate bat-
tery power. When red, change batteries immediately. Blue RF LED Indicates the bodypack is receiving a signal from the transmitter. Detachable Antennas SMA Connector
*Removable AA Adapter P10R is shipped with an adapter which can be removed to accommodate a Shure rechargeable battery pack.
*Note: to remove adapter, open door and slide adapter out. To replace, place adapter in place and press, there will be an audible click when seated. RF Settings RADIO G CH 888.888MHz Squelch Full SCAN RF Pad 6 Sets the group number Sets the channel number Manual frequency selection Adjust squelch setting Performs spectrum scan and displays open frequen-
cies in a graphical interface Attenuates antenna signals in 3 dB increments Utilities and Display Settings UTILITIES CUEMODE DISPLAY CONTRAST LOCK PANEL BATTERY RESTORE Battery Life*
Battery Indicator Enters CueMode (to exit, press enter and select EXIT CUEMODE) Changes the display format Changes the display contrast Locks all controls except power and volume. To un-
lock, press exit, select OFF, and press enter. Displays the following: Minutes Left, Temperature, Status, Cycle Count, and Health Returns receiver to factory default settings. Tri-Color Battery LED Approximate Hours Remaining Li-
ION Alkaline Volume Level 8 Alkaline Volume Level 6 Alkaline Volume Level 4 Green Green Green Green Amber 57 34 33 22 1 2-3 22 12 11 1-
1 1 1 7-8 6-7 4-6 2-4 1-2
*Test specs using Energizer brand AA Alkaline batteries:
Receiver (RX) Settings:
Output driving Shure SE425 earphones Corresponding SPL @ Ear: ~115 dB SPL Note: SPL at ear will vary with fit and earphones HIBOOST - OFF V. LIMIT - OFF Transmitter (TX) Settings:
Audio Input: pink noise* @ +8.7 dBV Transmitter Input mode: LINE Transmitter Input level: -9 dB
*Pink Noise is a signal with a frequency spectrum such that the power spec-
tral density is inversely proportional to the frequency. In pink noise, each octave carries an equal amount of noise power. Note: Using lower-impedance earphones, different battery types and higher gain settings in a PSM system may cause the receiver battery life to be dif-
ferent than specified. Multiple System Setup When setting up multiple systems, designate a single bodypack to scan for available frequencies and download them to all the rack units. The bodypack must be from the same frequency band as all the transmitters. 1. Power on all the rack units. Turn off the RF. (This prevents them from interfering with the frequency scan.) Note: Turn on all other wireless or digital devices as they would be dur-
ing the performance or presentation (so the scan will detect and avoid any interferance they generate). 2. Use the bodypack to scan for a group by pressing and holding the scan button for two seconds. The bodypack displays the group and the num-
ber of available channels, and flashes SYNC NOW.... Important: Note the number of available channels. If you have more rack units than available channels, eliminate potential sources of interfer-
ence and try again, or call Shure Applications for assistance. 3. Sync the bodypack with the first rack unit by aligning the IR windows and pressing sync. 4. Press scan again on the bodypack to find the next available frequency. 5. Sync the bodypack with the next rack unit. 6. Repeat with all the rack units. 7. Sync each performers bodypack to its respective rack unit by aligning the IR windows and pressing snyc. DO NOT press scan on the bodypacks. 8. Turn on the RF on all rack units. The systems are ready to use. MixMode for Multiple Systems Configure each system for MixMode. From the mixing console, send a mix of the whole band to input 2 of the first transmitter. Connect the LOOP OUT R output to the CH. 2 IN input of the next transmitter. Continue the chain with all the transmitters. Next, create solo mixes for each performer. Send each mix to input 1 of the transmitter for that performer. CueMode CueMode allows you to upload the name and frequency settings from mul-
tiple rack units and store them as a list on a single bodypack. You can then, at any time, scroll through that list to hear the audio mix from each transmit-
ter, just as each performer does during a show. CueMode lists are retained even if CueMode is exited, the bodypack is turned off, or batteries are removed. Note: Set the channel frequency and assign display names for each trans-
mitter before creating your CueMode list. Adding Transmitters to the CueMode List Note: The transmitter must be from the same frequency band as the bodypack. 1. Open the battery door and press the enter button. 2. From the main menu, scroll to UTILITIES and press enter. Select CueMode and press enter again. 3. Align IR windows and press sync on the rack unit. The LCD displays SYNC SUCCESS after frequency and name data are uploaded to the CueMode list. It also displays the CueMode number for that transmitter and the total number of transmitters. 4. Repeat the above step for each transmitter. Note: Syncing while in CueMode does not change any of the settings on the bodypack. Auditioning Mixes 1. Enter CueMode from the UTILITIES menu. 2. Use the buttons to scroll through your CueMode list to hear the mixes. Exiting CueMode Exit CueMode by pressing enter and selecting EXIT CUEMODE. Managing CueMode Mixes While in Cue Mode, you can access the following menu by pressing enter:
REPLACE MIX Select and press sync on a rack unit to upload new data for the current mix (for example, if you have changed the transmitter frequency). DELETE MIX Removes the selected mix. DELETE ALL Removes all mixes. EXIT CUEMODE Exits CueMode and returns the bodypack to the previous frequency setting. Frequency Scan The scan feature analyzes the RF environment for interference to identify available frequencies. The PSM1000 has three frequency scan modes:
Channel Scan Press the scan button on the bodypack. Finds the first available channel. Group Scan Press and hold the scan button for two seconds. Finds the group with the greatest number of available channels. (Each group contains a set of frequencies that are compatible when operating multiple systems in the same environment.) Full Scan From the bodypack menu select, Radio>Full Scan. Press Scan to initiate a full scan. Press Spectrum Scan to view full results in a graphical display. Note: follow these steps when doing a full scan:
1.)Turn on all TX's 2.) Turn off all wireless microphone transmitters 3.) Never do a scan near a transmitter in the same frequency band Sync The PSM1000 transfers settings in either direction: from the bodypack to the rack unit, or from the rack unit to the bodypack. Downloading settings from the bodypack: First press the scan button on the bodypack. Then align the IR windows and press the sync button on the rack unit while the bodypack display is flashing SYNC NOW.... The level LEDs flash on the rack unit. Sending settings to the bodypack: Align the IR windows and press the sync button on the rack unit. The blue LED on the bodypack flashes. Press sync again to transfer settings. Note: When properly aligned the IR window on the transmitter illuminates 7 Custom Groups This feature allows you to create your own groups of frequencies. Creating new groups... Menu: Radio > Custom 1. Turn the Control wheel to select a custom group number (U1, U2, U3, etc.) 2. Push the Control wheel to move to the Channel parameter and turn it to select a channel (01, 02, 03, etc.) 3. Push the Control wheel to move to the Freq parameter and select a frequency for that channel. 4. Push the NEXT menu key to select a frequency for the next chan-
nel in that group. Load deploys groups over network 5. 6. Clear deletes all custom groups. MixMode Some performers need to hear more of their own voice or instrument, while others want to hear more of the band. With MixMode, the performer creates their own mix using the balance control ( buttons) on the bodypack. To use MixMode, send a solo mix of the performer to the CH. 1 IN input on the transmitter, and send a band mix to the CH. 2 IN input. Set the performers bodypack for MixMode. The bodypack combines the two signals and sends them to both earphones, while the balance control on the bodypack adjusts the relative levels for each. LOOP Applications Use LOOP OUT L (left) and R (right) outputs to send a copy of the audio signal going into the transmitter to other devices. Following are a few of the many applications for these outputs. Note: The input level control and the input pad do not affect the LOOP OUT signals. Stereo for Multiple Systems Send one stereo signal from the mixing console to the inputs on the first transmitter, then connect the LOOP outputs to the inputs on the next trans-
mitter. Repeat for all transmitters to form a chain. Floor Monitors Send the audio from the LOOP outputs to on stage loudspeakers. The bodypack and the on stage monitors receive the same audio signals. Squelch Squelch mutes audio output from the bodypack when the RF signal be-
come noisy. While squelch is activated, the blue LED on the bodypack turns off. For most installations, squelch does not need adjustment, and it keeps the performer from hearing hiss or noise bursts if the RF signal becomes com-
promised. However, in congested RF environments or in close proximity to sources of RF interference (such as large LED video panels), the squelch may need to be lowered to prevent excessive audio dropouts. With lower squelch settings, the performer may hear more noise or hiss, but will experi-
ence fewer audio dropouts. Note: Before lowering squelch, first try to eliminate the problem by find-
ing the best set of frequencies for your installation and removing potential sources of interference. Caution: Turning off or lowering the squelch setting can increase the noise level and cause discomfort to the performer:
Do not lower the squelch setting unless absolutely necessary. Turn earphone volume to the lowest setting before adjusting squelch. Do not change the squelch setting during a performance. Turn up the transmitter setting to make noise or hiss less noticeable. Squelch Settings HIGH (NORMAL) Default factory setting. MID LOW PILOT ONLY NO SQUELCH Moderately decreases the signal-to-noise ratio required to squelch the receiver. Greatly decreases the noise squelch threshold. Turns off noise squelch leaving only pilot squelch on. Symbol appears in display window Turns off noise and pilot tone squelch. (Sometimes used as a debugging tool by monitor engineers or RF coordinators to listen to the RF environment.) Symbol appears in display window Point-to-Point Wireless Audio PTP mode can be used to allow a P10T to transmit to a UHFR receiver. This allows a transmitter and receiver set-up where both units are racked and powered by AC. Recording Devices To record a performance, connect the LOOP outputs to the inputs of a re-
cording device. L R 8 UR4S Wireless Receiver with Audio Reference Conpanding sync OL A B ENTER EXIT push RF Audio XX YYY-ZZZ MHz Navigate Control Monitor POWER OFF push Monitor Clip For more information visit:
www.shure.com/americas/products/personal-monitor-systems Ethernet Connection Networking Transmitters Basic Network Each transmitter has an RJ-45 port on the back for connecting to other transmitters over an Ethernet network. Networking transmitters allows you to automatically set channels for all the transmitters with a single group scan command. Connect transmitter to an Ethernet router with DHCP service. Use Ethernet switches to extend the network for larger installations. Use the transmitters default network setting
(Util > Network > Mode = Automatic). Accessing the Network with a Computer You can also control and monitor all networked units through the Shure Wireless Workbench software. If you want to use the Wireless Workbench software, connect your computer to the network and install the software from the CD that came with the transmitter. Make sure your computer is configured for DHCP (from Control Panel, click Network Connections. Double-click on Local Area Connection. Select Internet Protocol
(TCP/IP) and click Properties. Select Obtain IP address automatically and Obtain DNS server address automatically and click OK). NOTE: Some security software or firewall settings on your computer can prevent you from connecting to the transmitter. If using firewall software, allow connections on port 2201. Static IP Addressing The transmitter also supports static IP addressing. Assign your own IP addresses ( Util > Network > Mode = Manual). NOTE: Dual transmitters use a single IP address, which may be set through either LCD interface. Network Parameters NOTE:
The transmitter reboots after you press ENTER to accept network parameter changes These settings affect both transmitters (the dual transmitter is treated as a single network device). Set the Transmitter Network Mode Menu: Util > Network 1. Push the Control wheel to move the cursor to the Mode 2. Turn the Control wheel to set the transmitter to one of the parameter. following values:
Automatic: use this setting when connecting the transmit-
ter to a DHCP server. Manual: allows you to set the transmitter to a specific IP address or subnet. IP Address and Subnet Menu: Util > Network NOTE: To change these settings, the network mode must be set to Manual. 1. Push the Control wheel to move the cursor to any of the following parameters:
IP (IP address) Sub (Subnet mask) 2. Turn the Control wheel to change the value. Router with DHCP Computer Router with DHCP and switches Computer Switch Switch Transmitters default network setting P10T P10T P10T Device ID Assists in identifying transmitters through the Wireless Workbench Software (has no effect on network identification). Menu: Util > Network 1. Push the Control wheel to move the cursor to the DevID 2. Turn the Control wheel to set the transmitter to change the parameter. value. Shure Wireless Workbench Software Shure Wireless Workbench software includes a variety of useful tools for installing and managing multiple wireless systems. Instructions on using the Wireless Workbench software are available in the online help files after you install the software. 9 Spectrum Scan Use this feature to scan the full RF spectrum for potential sources of inter-
ference and deploy open frequencies to all transmitters on the network. A graphical representation of the scan data may be viewed on both the trans-
mitter and receiver. This allows you to scroll through the graph to reveal details about the frequency and strength of the interfering signals. Scanning and Deploying Frequencies 1. Turn off RF on all transmitters. Collect the scan data. From the bodypack receiver MAIN MENU, select RADIO > FULL SCAN > RUN SCAN 2. The receiver displays SPECTRUM SCAN and scans the full spectrum. 3. Load the scan data from the bodypack receiver to the rack transmit-
ter. Align the IR windows and press Sync > Spectrum > SyncScan 4. The transmitter displays the scan data as a graph and gives options for viewing and deploying. Search network for devices. From the rack transmitter Sync > Spectrum menu, press Deploy. The rack transmitter searches the network for all available transmitters. 5. Choose a group. Use the control wheel to select from the available groups. The number of open frequencies for each group is displayed next to Open Frequencies:
6. Deploy frequencies. Press the flashing enter button to deploy frequen-
cies to all channels. The LEDs flash on all affected channels. Viewing Spectrum Data From the Bodypack Receiver MAIN MENU > RADIO > FULL SCAN > SPECTRUM Adjust the cursor position using the keys. Press enter to zoom in at the cursor position. Press exit to zoom out. Press scan to display frequency and power of signal at the cursor position. From the Rack Transmitter Sync > Spectrum Adjust the cursor position by pressing Cursor and using the control wheel. Frequency and power of signal at the cursor position is displayed at the top of the screen. Press Zoom and use the control wheel to zoom in and out. Automatic Frequency Selection Follow these steps to use the channel scan and group scan features on the transmitter. Before you begin Turn all RF off. Mute all inputs on mixing devices connected to the Install the transmitters and power them on. transmitter. Turn off the RF transmission on the transmitters for the systems you are setting up. Turn on potential sources of interference such as other wireless systems or devices, computers, CD players, large LED panels, effects processors, and digital rack equipment so they are operating as they would be during the presentation or performance. Individual Transmitter 1. On receiver, select Scan to find an open channel. 2. Sync receiver to transmitter by aligning it with IR port and pressing sync button. Networked Transmitters With networked transmitters, you can take advantage of the group scan feature to set group and channel settings for all the transmitters at the same time. Perform a group scan from any receiver 1. Press and hold scan button for 2 seconds to initiate scan. 2. Sync scan results to any transmitter on the network via the 3. Follow the transmitter instructions to deploy frequencies to all networked transmitters 4. Sync receivers with the transmitters carrying the IR port. desired mix. NOTE: The group scan feature only works for transmitters in the same frequency band. For example, if you did a group scan on a G10 band transmitter, all G10 band transmitters would be set up, but not J8 band transmitters. Multiple TransmittersNot Networked If your transmitters are not networked (or in different bands), the group scan cannot automatically set their group and channel settings. However, you can still take advantage of the group scan feature to find the group with the most open channels and the channel scan feature to find open channels in that group. Find the group with the most open channels Perform a group scan following the steps from the Multiple System Setup section in the user guide for setting up multiple transmitters which are not networked. NOTE: Transmitters in different bands (G10, J8, etc.) do not need to be set to the same group. 10 Connecting the PSM1000 via Ethernet to an AMX or Crestron system. Message Types The Control system can send two (2) types of command messages, as follows:
SET - The SET command is sent from the control system to the Shure device to change the value of a parameter. This is used to SET the parameter to a specific value. Once a SET command is sent, the Shure device will send back a REPORT string with the current resultant setting. GET - The GET command gets the current value of a parameter. Once a GET command is sent, the Shure device will send back a REPORT string with the current setting. The Shure device can send a response with one (1) type of response mes-
sage, as follows:
REPORT - The REPORT string reports the current value for a parameter. The REPORT string is sent from the Shure device to the Control system in response to a SET or GET command. The REPORT string is also sent when the value of the parameter is changed on the Shure device. All messages sent and received are ASCII characters. Each message begins with a < followed by a space. Each message ends with a space followed by an >. Each message is terminated by a carriage return and line feed (CRLF). The control system may need to enter the hex value of this, which is equiva-
lent to 0x0D0A. Please see the control system user guide for specific infor-
mation on how to enter this. If the message is a channel parameter, the parameter string must be pre-
ceded by the number of the channel. If the message is a box parameter, there should be no channel number in the string. Example Messages This section contains example messages. Example Messages for Channel Parameters
< GET 1 FREQUENCY >/0d/0a
< REPORT 1 FREQUENCY 578000 >/0d/0a Example Messages for Box Parameters
< SET DEVICE_NAME Shure >/0d/0a
< REPORT DEVICE_NAME Shure >/0d/0a View Transmitter Name Set Channel Name Get Channel Name Set Audio Level View Audio Level Set Transmitter Group & Channel View Transmitter Group & Channel Set Transmitter Frequency View Transmitter Frequency Set RF Tx Level View RF Tx Level Set RF Mute View RF Mute Set Audio Tx Mode View Audio Tx Mode Set Audio Input Line Level View Audio Input Line Level Set Metering Rate View Metering Rate Audio Meter Level Command
< GET DEVICE_NAME >/0d/0a
< SET x CHAN_NAME vvvvvvvv >/0d/0a
< GET x CHAN_NAME >/0d/0a
< SET x AUDIO_IN_LVL vvvv >/0d/0a
< GET x AUDIO_IN_LVL >/0d/0a
< SET x GROUP_CHAN gg,cc >/0d/0a
< GET x GROUP_CHAN >/0d/0a
< SET x FREQUENCY vvvvvvvvvvv >/0d/0a
< GET x FREQUENCY >/0d/0a
< SET x RF_TX_LVL vvvvvv >/0d/0a
< GET x RF_TX_LVL >/0d/0a
< SET x RF_MUTE vvvv >/0d/0a 1 = mute, 0 = unmute
< GET x RF_MUTE >/0d/0a 1 = mute, 0 = unmute
< SET x AUDIO_TX_MODE vvvv >/0d/0a 1 = mono, 2 = point to point, 3 = stereo
< GET x AUDIO_TX_MODE >/0d/0a
< SET x AUDIO_IN_LINE_LVL vvvv >/0d/0a 0 = off (Aux), 1 = on (Line)
< GET x AUDIO_IN_LINE_LVL >/0d/0a
< SET x METER_RATE vvvvvvvvvvv >/0d/0a 0 = off, value in milliseconds
< GET x METER_RATE >/0d/0a N/A Response
< REPORT DEVICE_NAME vvvvvvvv >/0d/0a
< REPORT x CHAN _NAME vvvvvvvv >/0d/0a
< REPORT CHAN _NAME vvvvvvvv >/0d/0a
< REPORT x AUDIO_IN_LVL vvvv >/0d/0a
< REPORT x AUDIO_IN_LVL vvvv >/0d/0a
< REPORT x FREQUENCY vvvvvvvvvvv >/0d/0a
< REPORT x GROUP_CHAN gg,ccvvv >/0d/0a
< REPORT x GROUP_CHAN gg,cc >/0d/0a
< REPORT x FREQUENCY vvvvvvvvvvv >/0d/0a
< REPORT x GROUP_CHAN --,--vvv >/0d/0a
< REPORT x FREQUENCY vvvvvvvvvvv >/0d/0a
< REPORT x RF_TX_LVL vvvvvv >/0d/0a
< REPORT x RF_TX_LVL vvvvvv >/0d/0a
< REPORT x RF_MUTE vvvv >/0d/0a 1 = mute, 0 = unmute
< REPORT x RF_MUTE vvvv >/0d/0a 1 = mute, 0 = unmute
< REPORT x AUDIO_TX_MODE vvvv >/0d/0a 1 = mono, 2 = point to point, 3 = stereo
< REPORT x AUDIO_TX_MODE vvvv >/0d/0a 1 = mono, 2 = point to point, 3 = stereo
< REPORT x AUDIO_IN_LINE_LVL vvvv >/0d/0a 0 = off (Aux), 1 = on (Line)
< REPORT x AUDIO_IN_LINE_LVL vvvv >/0d/0a 0 = off (Aux), 1 = on (Line)
< REPORT x METER_RATE vvvvvvvvvvv >/0d/0a 0 = off, value in milliseconds
< REPORT x METER_RATE vvvvvvvvvvv >/0d/0a 0 = off, value in milliseconds
< REPORT x AUDIO_IN_LVL_L vvvvvvvvvvv >/0d/0a
< REPORT x AUDIO_IN_LVL_R vvvvvvvvvvv >/0d/0a 11 SPECIFICATIONS PSM1000 RF Carrier Range 470952 MHz Note: varies by region Compatible Frequencies Per band: 49 Tuning Bandwidth US: 7280 MHz varies by region Operating Range (environment dependent) 90 m (300 ft) Audio Frequency Response 35 Hz15 kHz Signal-To-Noise Ratio (A-Weighted) 90 dB (typical) Total Harmonic Distortion (ref. 34 kHz deviation
@1 kHz)
<0.5% (typical) Companding Patented Shure Audio Reference Companding Spurious Rejection (ref. 12dB SINAD)
>80 dB (typical) Frequency Stability 2.5 ppm MPX Pilot Tone 19 kHz (0.3 kHz) Modulation FM*, MPX Stereo
* 34 kHz deviation (nominal) Operating Temperature
-18C+57C P10R Tri-Band Filtering 3 dB at 30.5 MHz from the center frequency of each band Active RF Gain Control 31 dB Adjusts RF sensitivity to provide more RF dynamic range RF Sensitivity (at 20 dB SINAD) 2.2 V Image Rejection
>90 dB Adjacent Channel Rejection
>70 dB Squelch Threshold 22 dB SINAD (3 dB) (default setting) Intermodulation Attenuation
>70 dB Blocking
>80 dB Audio Output Power (1kHz @ <1% distortion, peak power, @32) 100 mW per output Minimum Load Impedance 9.5 High Boost Selectable: +2 dB , +4 dB @ 10 kHz Volume Limiter Selectable: 39 Limits volume adjustment knob. Selected value analogous to volume knob increment. Net Weight 186 g (with batteries) Dimensions 99 mm X 66 mm X 23 mm Battery Life 46 hours (continuous use) AA Batteries P10T RF Output Power Selectable: 10, 50, 100 mW (+20 dBm) varies by region RF Output Impedance 50 (typical) Net Weight 850 g Dimensions 483 mm X 343 mm X 44 mm Power Requirement Input: 100-240V AC, 50/60 Hz, 0.5A max (5.5 max outlet loaded) Output: 100-240V AC, 5A max, unswitched Audio Input Connector Type Combination XLR and 6.35 mm (1/4) TRS Polarity XLR: Non-inverting (pin 2 positive with respect to pin 3) 6.35 mm (1/4) TRS: Tip positive with respect to ring Configuration Electronically balanced Impedance 70.2 k (actual) Nominal Input Level switchable switchable: +4 dBu, 10 dBV Maximum Input Level
+4 dBu: +29.2 dBu 10 dBV: +12.2 dBu Pin Assignments XLR: 1=ground, 2=hot, 3=cold 6.35 mm (1/4) TRS: Tip=hot, Ring=cold, Sleeve=ground Phantom Power Protection up to 60 V DC Audio Output Connector Type 6.35 mm (1/4) TRS Configuration Electronically balanced Impedance Connected directly to inputs 12 BAND RANGE G10 G10E H8Z J8 J8E 470-542 518-582 554-626 COUNTRY US, IA UK, EU, Peru NZ, Korea US, IA EMEA Output Power (mW) 10/50/100 10/50 10/50 10/50/100 10/50 K10E 596-668 UK, EU, Australia 10/50 Shure Rechargeable SB900 The SB900 is a rechargeable Lithium-ion battery with a capacity of 1450 mAh. Dimensions 17.5mm
(.67 in.) L8 L8E L9E L10 P8 Q21 Q22E Q23 R26 R27 A24 X1 626-698 670-742 670-742 710-790 710-787 750-822 750-806 794-806 794-806 779-788 797-806 944-952 US, IA, Aus Emea 10/50/100 10/50 China HK EU China EU HK Taiwan Thailand/EMEA Japan 10/50 10/20 10/50 10/50 10/50 10/20 6/10 10/50 6/10 US 10/50/100 NOTE:
This Radio equipment is intended for use in musical professional entertainment and similar applications. This Radio apparatus may be capable of operating on some frequencies not authorized in your region. Please contact your national authority to obtain information on authorized frequencies and RF power levels for wireless microphone products. 50.4mm
(1.98 in.) 31.8mm
(1.25 in.) Note: Place battery into charger, slotted side down with Shure logo facing down, warnings facing up. CAUTION: Danger of explosion if battery incorrectly replaced. Replace only with the same or equivalent type WARNING: Battery packs shall not be exposed to excessive heat such as Sunshine, fire or the like. Battery Packs may explode or release toxic materials Never put batteries in mouth. If swallowed, contact your physician or local poison control center. Do not short circuit; may cause burns or catch fire Do not charge or use battery packs with other than specified Shure products Dispose of battery packs properly. Check with local vendor for proper disposal of used battery packs. Use this battery charger only with the Shure Model PS50 series power supply. This equipment is intended to be used in professional audio applications EMC conformance is based on the use of supplied and recommended cable types. The use of other cable types may degrade EMC performance. Use this battery charger only with the Shure charging modules and battery packs for which it is designed. Use with other than the specified modules and battery packs may increase the risk of fire or explosion. Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate this equipment. Specifications Charge Temperature:
Constant Charge Voltage:
Constant Charge Current:
Nominal Voltage:
Rated Capacity:
0C to 45C (recommended) 4.2V +/-0.05V 750 mAh 3.7V 1450 mAh For more information on batteries and chargers visit: www.shure.com 13 INFORMATION TO USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These lim-
its are designed to provide reasonable protection against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be de-
termined by turning the equipment off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
Relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer. Note: EMC conformance testing is based on the use of supplied and recommended cable types. The use of other cable types may degrade EMC performance. Changes or modifications not expressly ap-
proved by the manufacturer could void the users authority to operate the equipment. Declaration of Conformity EU Declaration of Conformity is available at: www.shure.com ACCESSORIES AND PARTS CERTIFICATION Furnished Accessories P10R Antenna P10T, P10R This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est con-
forme la norme NMB-003 du Canada. Meets requirements of EMC standards EN 300 422 Parts 1 and 2 and EN 301 489 Parts 1 and 9. UA700 UA710 UA720 UA730 UA740 UA820G10 UA820J8 UA820K1 UA820L8 UA820LCH UA820P8 UA820Q2 UA820X UA820H8 95A9023 95A2313 53A8612 53A8611 53B8443 90AR8100 90B8977 PA821SWB PA421SWB PA805SWB HA-8089 UA860SWB UA802 UA806 UA825 UA850 UA8100 P10T Certified under FCC Parts 74. (FCC ID:
DD4P10TA, DD4P10TB, DD4P10TC, DD4P10TD, DD4P10TJ). Certified by IC in Canada under RSS-123 and RSS-102. (IC: 616A-P10TA, 616A-P10TB, 616A-P10TC, 616A-P10TD). Meets essential requirements of European R&TTE Directive 99/5/EC, eligible to bear the CE mark. Meets UL 60065 and CSA C22.2 No. 60065 P10R Approved under the Declaration of Conformity
(DoC) provision of FCC Part 15. Certified in Canada by IC to RSS-123. (IC: 616A-P10RA, 616A-P10RB, 616A-P10RC, 616A-P10RD). Operation of this device is subject to the follow-
ing two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The CE Declaration of Conformity can be ob-
tained from Shure Incorporated or any of its European representatives. For contact infor-
mation please visit www.shure.com The CE Declaration of Conformity can be obtained from:
Authorized European representative:
Shure Europe GmbH Headquarters Europe, Middle East & Africa Department: EMEA Approval Wannenacker Str. 28 D-74078 Heilbronn, Germany Phone: +49 7131 72 14 0 Fax: +49 7131 72 14 14 Email: EMEAsupport@shure.de LICENSING INFORMATION Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements. Changes or modifications not ex-
pressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless microphone equip-
ment is the users responsibility, and licensability depends on the users classification and ap-
plication, and on the selected frequency. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies. 470530 MHz 540626 MHz 596692 MHz 670830 MHz 830952 MHz 470542 MHz 554-626 MHz 596-668 MHz 626-698 MHz 670-742 MHz 710-790 MHz 750-822 MHz 944-952 MHz 518-582 MHz P10T Antenna Front Mount Antenna Cable Zipper Bag Rack mount Bracket, Long Rack mount Bracket, Short Link Bar Hardware Kit (Rack mounting Screws) Bumper Kit Optional Accessories 8-to-1 antenna combiner for better RF performance 4-to-1 antenna combiner with power dis-
tribution to 4 transmitters (better RF per-
formance and eliminates need for external power supply) Passive Directional Antenna Helical Antenna Passive Omnidirectional Antenna Coaxial Cable, BNC-BNC, RG58C/U type, 50 Ohm, 2 ft length (0.6 m) Coaxial Cable, BNC-BNC, RG58C/U type, 50 Ohm, 6 ft length (2 m) Coaxial Cable, BNC-BNC, RG8X/U type, 50 Ohm, 25 ft length (7.5 m) Coaxial Cable, BNC-BNC, RG8X/U type, 50 Ohm, 50 ft length (15 m) Coaxial Cable, BNC-BNC, RG213/U Type, 50 Ohm, 100 ft length (30 m) 14 i
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-02-28 | 952.85 ~ 956.25 | TLD - Licensed LPAS Device | Original Equipment |
2 | 2011-03-22 | 944 ~ 952 | TNB - Licensed Non-Broadcast Station Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2019-02-28
|
||||
1 2 |
2011-03-22
|
|||||
1 2 | Applicant's complete, legal business name |
Shure Incorporated
|
||||
1 2 | FCC Registration Number (FRN) |
0012570552
|
||||
1 2 | Physical Address |
5800 W. Touhy Ave
|
||||
1 2 |
Niles, Illinois 60714-4608
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
d******@elitetest.com
|
||||
1 2 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
DD4
|
||||
1 2 | Equipment Product Code |
P10TJ
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
C******** K********
|
||||
1 2 | Title |
EMC Project Engineer
|
||||
1 2 | Telephone Number |
847-6********
|
||||
1 2 | Fax Number |
847-6********
|
||||
1 2 |
k******@shure.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Shure Incorporated
|
||||
1 2 | Name |
D****** P****
|
||||
1 2 | Physical Address |
5800 W. Touhy Ave
|
||||
1 2 |
Niles, Illinois 60714
|
|||||
1 2 |
United States
|
|||||
1 2 | Telephone Number |
84760********
|
||||
1 2 |
p******@shure.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | TLD - Licensed LPAS Device | ||||
1 2 | TNB - Licensed Non-Broadcast Station Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Personal Monitor System Dual-Channel Transmitter | ||||
1 2 | Personal monitor system dual-channel transmitter | |||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output Power listed is Conducted. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Shure Incorporated
|
||||
1 2 |
Elite Electronic Engineering Inc.
|
|||||
1 2 | Name |
T******** B********
|
||||
1 2 |
K**** H******
|
|||||
1 2 | Telephone Number |
847-6********
|
||||
1 2 |
630-4******** Extension:
|
|||||
1 2 | Fax Number |
847-6********
|
||||
1 2 |
630-4********
|
|||||
1 2 |
b******@shure.com
|
|||||
1 2 |
k******@elitetest.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 74H | BD M4 | 941.5 | 952 | 0.1 | 2.5 ppm | 126KF3E | |||||||||||||||||||||||||||||||||
1 | 2 | 74H | BD M4 | 952.85 | 956.25 | 0.1 | 2.5 ppm | 126KF3E | |||||||||||||||||||||||||||||||||
1 | 3 | 74H | BD M4 | 956.45 | 959.85 | 0.1 | 2.5 ppm | 126KF3E | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 74 | BD M4 | 944.00000000 | 952.00000000 | 0.1000000 | 2.5000000000 ppm | 126KF3E |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC