MXCW Quick Setup More Information Available Online A comprehensive online user guide is available at pubs.shure.com. Microflex Complete Wireless Getting Started System access point (MXCWAPT) setup 1. Connect the access point to a Power over Ethernet (PoE) source to turn on the device. Wireless microphone devices (MXCW640) setup 1. Insert the Shure SB930 rechargeable battery and connect the MXC400 series microphone. 2. If prompted, select the operating region on the menu for RF coordination
(some model variations). 2. Press the power button on the bottom of the device. 3. Wait while the access point scans the area. 3. Wait while the microphone device searches for the default access point network (00). 4. The best Wi-Fi channel is automatically selected. 2017 Shure Incorporated 1/8 PoEMXCWAPTMXCW640Access point setupMicrophone unit setup00SB930MXC400Choose RegionTest the audioPoEMXCWAPTMXCW640Access point setupMicrophone unit setup00SB930MXC400Choose RegionTest the audioPoEMXCWAPTMXCW640Access point setupMicrophone unit setup00SB930MXC400Choose RegionTest the audioPoEMXCWAPTMXCW640Access point setupMicrophone unit setup00SB930MXC400Choose RegionTest the audioPoEMXCWAPTMXCW640Access point setupMicrophone unit setup00SB930MXC400Choose RegionTest the audioPoEMXCWAPTMXCW640Access point setupMicrophone unit setup00SB930MXC400Choose RegionTest the audioPoEMXCWAPTMXCW640Access point setupMicrophone unit setup00SB930MXC400Choose RegionTest the audioSearching... MXCW Quick Setup Shure Incorporated 4. The devices are ready when the LEDs briefly flash green and the touchscreen displays the home-screen. 2. Speak into the microphone to check the audio. Perform a Soundcheck 1. On one of the microphone devices, press the the microphone. speak button to activate 3. Listen to the sound check on the other devices' loudspeakers or head-
phone jacks. 4. For more information, visit pubs.shure.com for the full user guide. Device Installation and Positioning Visit to the online user guide for detailed templates, best practices, and in-
structions to install the device in a variety of ways:
Junction box Walls Microphone stand Ceiling tile Open the Web Application The web application provides system setup, live device monitoring, and meeting controls from a computer or tablet. 1. Connect a computer or tablet to the access point network and subnet. 2. Find the access point IP address:
2/8 2017/11/17 PoEMXCWAPTMXCW640Access point setupMicrophone unit setup00SB930MXC400Choose RegionTest the audioPoEMXCWAPTMXCW640Access point setupMicrophone unit setup00SB930MXC400Choose RegionTest the audioPoEMXCWAPTMXCW640Access point setupMicrophone unit setup00SB930MXC400Choose RegionTest the audioPoEMXCWAPTMXCW640Access point setupMicrophone unit setup00SB930MXC400Choose RegionTest the audioPoEMXCWAPTMXCW640Access point setupMicrophone unit setup00SB930MXC400Choose RegionTest the audio MXCW Quick Setup Shure Incorporated On the hardware: On the access point menu, scroll down to the IP address screen. From the computer: Use the Shure Device Discovery app to view and access devices on the network. Download the app for free from shure.com. 3. Open the device in a browser. 2017/11/17 3/8 IP ADDRESS192.254.115.222MXCWAPTMXCWAPT-a64ee5MXCWAPT-a64ee5.local169.254.115.222DanteYes MXCW Quick Setup Shure Incorporated 4. Sign into the application as the admin. Default System Settings MXCW is designed for plug-and-play operation with default settings. Default system settings:
Maximum System Size 125 wireless microphone devices Wireless Network Name (SSID) 00 Default meeting settings:
Microflex Complete Wireless Specifications Automatic (push to speak) No queue when the list is full Meeting Mode Maximum Total Speakers 8 Maximum Delegate Speakers 8 Important Product Information Safety Information IMPORTANT SAFETY INSTRUCTIONS 1. READ these instructions. 2. KEEP these instructions. 3. HEED all warnings. 4. FOLLOW all instructions. 5. DO NOT use this apparatus near water. 6. CLEAN ONLY with dry cloth. 4/8 2017/11/17 MXCW Quick Setup Shure Incorporated 7. DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in accordance with the manufacturers instructions. 8. DO NOT install near any heat sources such as open flames, radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place any open flame sources on the product. 9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. ONLY USE attachments/accessories specified by the manufacturer. 12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. UNPLUG this apparatus during lightning storms or when unused for long periods of time. 14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the apparatus. 16. The MAINS plug or an appliance coupler shall remain readily operable. 17. The airborne noise of the Apparatus does not exceed 70dB (A). 18. Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection. 19. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 20. Do not attempt to modify this product. Doing so could result in personal injury and/or product failure. 21. Operate this product within its specified operating temperature range. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel. The safety certifications do not apply when the operating voltage is changed from the factory setting. SAFETY PRECAUTIONS The possible results of incorrect use are marked by one of the two symbols"WARNING" and "CAUTION"depending on the imminence of the danger and the severity of the damage. WARNING: Ignoring these warnings may cause severe injury or death as a result of incorrect operation. CAUTION: Ignoring these cautions may cause moderate injury or property damage as a result of incorrect operation. WARNING LISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE. USE AS LOW A VOLUME AS POSSIBLE. Over ex-
posure to excessive sound levels can damage your ears resulting in permanent noise-induced hearing loss (NIHL). Please use the following guidelines established by the Occupational Safety Health Administration (OSHA) on maximum time exposure to sound pressure levels before hearing damage occurs. 90 dB SPL at 8 hours 110 dB SPL at hour 95 dB SPL at 4 hours 115 dB SPL at 15 minutes 100 dB SPL at 2 hours 105 dB SPL at 1 hour 120 dB SPL Avoid or damage may occur WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Note: Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC, INMETRO). WARNING 2017/11/17 Battery packs may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble, heat above 140F (60C), or incinerate. 5/8 MXCW Quick Setup Shure Incorporated Follow instructions from manufacturer Only use Shure charger to recharge Shure rechargeable batteries WARNING: Danger of explosion if battery incorrectly replaced. Replace only with same or equivalent type. Warning: Before charging, make sure the product is at room temperature, between 0 to 45C (32 to 113F). Never put batteries in mouth. If swallowed, contact your physician or local poison control center Do not short circuit; may cause burns or catch fire Do not charge or use battery packs other than Shure rechargeable batteries Dispose of battery packs properly. Check with local vendor for proper disposal of used battery packs. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like 1. 2. 3. 4. Important Product Information The equipment is intended to be used in professional audio applications. Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate this equipment. Note: This device is not intended to be connected directly to a public internet network. EMC conformance to Environment E2: Commercial and Light Industrial. Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC performance. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Information to the user This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. This device complies with Industry Canada licence-exempt RSS standard(s). Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. MXCWAPT WLAN Specifications 802.11g 2.4 GHz OFDM RF Output Power 18.2 dBm (EIRP) 6/8 Antenna Information Type = Custom, soldered to PCB Gain = +4.38dBi at 2.4 GHz Gain = +6dBi at 5 GHz 2017/11/17 MXCW Quick Setup Shure Incorporated 802.11a OFDM 5.15 - 5.35 GHz, 5.47 - 5725 GHz RF Output Power 21.6 dBm (EIRP) MXCW640 WLAN Specifications:
802.11g 2.4 GHz OFDM RF Output Power 16.2 dBm (EIRP) 5.15 - 5.35 GHz, 5.47 - 5725 GHz RF Output Power 19.1 dBm (EIRP) 802.11a OFDM Japanese Radio Law and Japanese Telecommunications Business Law Compliance. This device is granted pursuant to the Japanese Radio Law () and the Japanese Telecommunications Business Law (). This device should not be modified (otherwise the granted designation number will become invalid). 5GHz W52 W53 W56 3 W52 W53 W56 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 5,180 MHz 5,200 MHz 5,220 MHz 5,240 MHz 5,260 MHz 5,280 MHz 5,300 MHz 5,320 MHz 5,500 MHz 5,520 MHz 5,540 MHz 5,560 MHz 5,580 MHz 5,600 MHz 5,620 MHz 5,640 MHz 5,660 MHz 5,680 MHz 5,700 MHz W52 W53 1. 2. 2017/11/17 7/8 MXCW Quick Setup Shure Incorporated 3. Shure http://www.shure.co.jp 2.4GHz DS-SS FH-SS 40m 2,400MHz 2,483.5MHz Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carater primario Este produto est homologado pela ANATEL, de acordo com os procedimentos regulamen-
tados pela Resoluo 242/2000, e atende aos requisitos tcnicos aplicados. Para maiores informaes, consulte o site da ANATEL - http://www.anatel.gov.br Environmentally friendly disposal Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances. Certifications Hereby, Shure Incorporated declares that the radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.shure.com/eu-
rope/compliance Authorized European representative:
Shure Europe GmbH Headquarters Europe, Middle East & Africa Department: EMEA Approval Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone: +49-7262-92 49 0 Fax: +49-7262-92 49 11 4 Email: EMEAsupport@shure.de Note: See the label located on the bottom side of the charger enclosure for the FCC marking, the CE marking, the RCM marking, and the electrical rat-
ings. Trademarks Audinate, the Audinate logo and Dante are trademarks of Audinate Pty Ltd. Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: +1-847-600-2000 Email: info@shure.com 8/8