FP Wireless System Featuring a comprehensive selection of system configurations with key wireless audio technologies and components, FP Wireless provides the ability to cap-
ture crystal-clear audio with confidence. With simple and flexible components, including a portable receiver and XLR plug-on transmitter, it has never been easier for audio to be captured in the demanding and dynamic videography and electronic field production (EFP) environments. FP1 Bodypack Transmitter Lightweight, durable hous-
ing; for use with TA4F-
connection microphones including lavaliers and headsets FP2 Handheld Transmitter Lightweight, durable housing; available with either the legendary Shure SM58 cardioid dynamic wireless cap-
sule or with the VP68 condenser omnidirec-
tional capsule; compat-
ible with all Shure wire-
less capsules FP3 Plug-On Transmitter Durable metal housing, ergonomically designed for comfortable grip;
XLR connectivity allows for use with any wired dynamic XLR microphone FP5 Portable Receiver Lightweight, durable housing, suitable for mounting on camera or person, diversity anten-
nas, output via TA3F cable to either XLR or 1/8 connectors. Features Audio Reference Companding for crystal-clear audio Automatic Frequency Selection locates an open frequency at the touch of a button Automatic Transmitter Setup instantly syncs the transmitter to the receiver frequency Up to 12 compatible systems simultaneously All components powered by 2 AA batteries no power cord required Transmitter gain attenuation control manages input level Furnished Accessories Micrphone Clip (FP2) Plug-on Transmitter Belt Clip and Protective Skin (FP3) Camera Shoe Mount (FP5) TA3F-to-XLRm Audio Cable TA3F-to-3.5mm Dual-mono Audio Cable 1 Quickstart Install Batteries FP1 - FP5 FP2 FP3 Power up the FP5 Receiver Group scan for open frequencies Power up the transmitter Sync transmitter and receiver FP1 2 FP5 FP5 Receiver Power LED Green Yellow Red Flashing red on power up RF LED FP1 1 2 PGXD FP2 3 5 PGX1 3 FP3 6 3 1 2 1 2 4 7 5 Transmitter Controls and Connectors Indicator LED Power on Low battery alert Critical low battery, replace immediately Battery dead Illuminates when successfully synced to a transmitter (or manually tuned to a transmitter's frequency) Power Button Press and hold to power on or off. Infrared (IR) port Sends infrared beam to synchronize frequencies. TA3M Jack Use with TA3F cable for audio out. Audio Output Gain Adjust audio output level to devices such as cameras or recorders. LCD Screen Displays current settings for GROUP and CHANNEL and battery life. Scan Button Group scan: Push and hold (3 sec.) to find an open group and channel. Channel scan: Push and release to find an open channel in the current group. Sync button Align receiver and transmitter and press sync. Blue IR LED indicates successful sync. Note: Press sync and scan buttons to manually enter group and chan-
nel numbers Antennas Two antennas for diversity reception. Ready Controls locked IR transmission in progress Battery power low Batteries dead (transmitter cannot be turned on until batteries are changed) Transmitter and receive incompatible; contact your Shure reseller Green Flashing green Flashing red Solid red Flashing red on startup Rapic flashing red after synchronization Power Button Press and hold to power on or off. Infrared (IR) Port Receives infrared beam to synchronize frequencies. When using multiple systems, only one transmitter IR port should be exposed at a time. 4-Pin Microphone Input Jack Use with with a TA4F connector for a lavalier or headset microphone. Audio Input Gain Adjusts audio level. XLR Connection (FP3 only) Plug into an XLR microphone or the output of an audio device. Audio Input Level Indicator (FP3 only) Red Yellow Green 3 Signal clip Nominal peak Audio present Adjusting Gain FP1 and FP3 Perform a sound check. Use the audio gain control located on the side (FP1) or front (FP3) of the unit to adjust the gain up (+) or down () until desired level is reached. FP3 only: Adjust so the audio input level indicator flickers yellow at peak sound levels. i c m 0 B d 0 1
i c m 0 B d 0 1
FP3 FP1 Single System Setup 1. Perform a group scan:
Press and hold the scan button for 3 seconds. After the scan com-
pletes, the new group and channel is automatically activated and saved. 2. Synchronize the transmitter:
Align the transmitter and receiver infrared (IR) ports and press the sync button. After a successful sync, the transmitter LED momentarily flashes and the blue RF LED illuminates. Manual Group and Channel Selection
(receiver only) Important: Most single-system applications do not require manual group or channel settings--use an automatic frequency scan instead. However, it may be useful for some applications, such as to tune to and record au-
dio directly from a microphone in a compatible wireless installation. To set the group:
1. Press the scan and sync buttons simultaneously. The GROUP display flashes. 2. Press the sync button to change the group number. 3. Press scan to accept the selected group. 4. Press scan again to save and exit. 5. If desired, perform a channel scan to select an open channel in that group. To set the channel:
1. Press the scan and sync buttons simultaneously. The GROUP display flashes. 2. Press scan to move to the channel setting. The CHANNEL number flashes. 3. Press the sync button to advance to the desired channel number. 4. Press scan to save and exit. Note: Remember to sync the transmitter to the receiver. FP2 The handheld transmitter normally does not require adjustment and should be left at 0dB for most appli-
cations. Only use the 10dB setting for loud singing or other high SPL applica-
tions if there is noticable distortion. PGXD Access the gain adjustment switch by unscrewing the head of the microphone. Use the tip of a pen or a small screwdriver to move the switch:
10dB: Use only if audio distorts due to high SPL levels. FP2 0dB: For normal use. BIAS AUDIO 0dB
-10dB AUDIO 0dB
-10dB Multiple System Setup Use the following steps to ensure the best performance when using mul-
tiple wireless systems at the same location. 1. Turn all receivers on and all transmitters off. Note: Turn on any other digital equipment that could cause interfer-
ence during the performance so it will be detected during the frequen-
cy scans in the following steps. 2. Perform a group scan using the first receiver by pressing and holding the scan button for 3 seconds. 3. Turn on the first transmitter and sync it to the receiver. For each additional system:
1. Manually set the group number to match the first receiver (see Manual Group and Channel Selection). 2. Perform a channel scan by pressing the scan button. 3. Sync the transmitter to the receiver. Important: After syncing each transmitter, leave it on so that scans from the other receivers do not select that channel. Be sure only one transmit-
ter IR port is exposed when synchronizing each system. Automatic Frequency Scan If you experience RF interference, switch to a new channel using the channel or group scan. Channel scan: Press the scan button on the receiver. Switches to new channel in the same group. Group scan: Press and hold the scan button for 3 seconds. Finds a new group and selects an open channel in that group. (Do not use in multiple system setups unless all systems are moved to the same group.) Locking and Unlocking the Transmitter Locking the transmitter prevents accidental changes during performances. To lock the controls: With the transmitter off, hold the power button down until the green LED flashes (~5 seconds) To unlock the controls: With the transmitter on, hold the power button down until the green LED flashes (~5 seconds) 4 Troubleshooting Issue No sound or faint sound Indicator Status Transmitter power light on, receiver blue RF LED off Transmitter power light on, receiver blue RF LED on Receiver power LED off, red, or blinking red Transmitter power LED red or flashing red Transmitter power LED off Distortion or unwanted noise bursts N/A Distortion increases gradually Cannot turn transmitter or receiver on Transmitter or receiver power LED red Power LED flashing red Solution Sync the transmitter to the receiver Move closer to and maintain line-of-sight with the transmitter. Move away from metal surfaces and digital equipment. Verify all sound system connections Adjust gain settings on the transmitter and receiver. Make sure the handheld transmitter gain is at the 0dB setting. Insert fresh batteries or power on the receiver Replace transmitter batteries If indicator continues flashing red after batteries are replaced, the transmitter and receiver may belong to incompatible frequency bands. Contact your Shure reseller for assistance. Turn on transmitter Make sure the +/- indicators on batteries match the transmitter terminals Insert fresh batteries Remove nearby sources of RF interference (CD players, computers, digital effects, in-ear monitor systems, etc.) Change receiver and transmitter to a different frequency Reduce transmitter gain Replace transmitter batteries If using multiple systems, change the frequency of one of the active systems Replace batteries Replace batteries Tips for Improving System Performance Maintain a line-of-sight between transmitter and receiver Avoid proximity to metal surfaces and digital equipment that could cause RF interference, such as computers, LCD screens, and other audio electronics. Furnished Accessories Micrphone clip (FP2) Plug-on Transmitter belt clip and protective skin (FP3) Camera Shoe Mount (FP5) TA3F-to-XLRm audio cable TA3F-to-3.5mm dual-mono audio cable WA371 AFP301 AFP511 WA451 WA461 5 SPECIFICATIONS Working Range Line of Sight Tonekey Audio Frequency Response Total Harmonic Distortion Ref. 38 kHz deviation with 1 kHz tone Dynamic Range Operating Temperature Range 100 m (300 ft) Note: Actual range depends on RF signal absorp-
tion, reflection and interference. 32.768 kHz 4515000 Hz Note: Dependent on microphone type
<0.5%, typical
>100 dB, A-weighted
-18C (0F) to +50C (122F) Note: Battery characteristics may limit this range. FP1 Gain Adjustment Range Input Impedance RF Output Power Pin Assignments TA4M Dimensions Weight Housing Power Requirements Battery Life FP2 Maximum Input Level Gain Adjustment Range RF Output Power Dimensions Weight Housing Power Requirements Battery Life 10 +20dBV 1 M 1030 mW varies by region 1:
2:
3:
4:
ground (cable shield)
+ 5 V Bias audio Tied through active load to ground (On instru-
ment adapter cable, pin 4 floats) 108 mm x 64 mm x 19 mm (H x W x D) 81 g (3 oz.), without batteries Molded polycarbonate case LR6 AA batteries, 1.5 V up to 12 hours (alkaline)
+2dBV 8dBV at 10 dB gain setting:
at 0 dB gain setting:
10 dB 1030 mW varies by region 254 mm X 51 mm dia. (10 X 2in.) 290 g (10.2oz.) (without batteries) Molded PC/ABS handle and battery cup LR6 AA batteries, 1.5 V up to 12 hours (alkaline) FP3 Gain Adjustment Range Input Impedance RF Output Power Dimensions Weight Housing Power Requirements Battery Life FP5 Dimensions Weight Housing Sensitivity Power Requirements Battery Life 10 +20dBV 1 M 1030 mW varies by region 99 mm x 66 mm x 23 mm (H x W x D) 207 g (7.3 oz.), without batteries Molded polycarbonate case LR6 AA batteries, 1.5 V up to 12 hours (alkaline) 108 mm X 64 mm X 19 mm (H x W x D) 81 g (3 oz. Molded polycarbonate case
-108 dBm for 12 dB SINAD, typical LR6 AA batteries, 1.5 V up to 12 hours (alkaline) Audio Output (UR5) Type Configuration Pin Assignments Maximum Audio Output Level Ref. 38 kHz deviation with 1 kHz tone Impedance TA3F Impedance balanced 1=ground, 2=hot, 3=cold 13dBV (into 600 load) 200 Frequency Range and Transmitter Output Level NOTE: This Radio apparatus may be capable of operating on some frequencies not authorized in your region. Please contact your national authority to obtain information on authorized frequencies for wireless microphone products in your region. Range BAND 470 - 494 MHz G4 470 - 494 MHz G4E 494 - 518 MHz G5 494 - 518 MHz G5E 518 - 542 MHz H5 518 - 542 MHz H5E 572 - 596 MHz J3 606 - 630 MHz K3E 638 - 662 MHz L4 638 - 662 MHz L4CN 638 - 662 MHz L4E 702 - 726 MHz P4 702 - 726 MHz P4CN 736 - 754 MHz Q24 794 - 806 MHz R13 794 - 806 MHz R19 800 - 820 MHz R5 806 - 810 MHz JB 838 - 865 MHz S6 925 - 932 MHz X4
* Conductive into 50 ohms 6 Transmitter output*
30 mW 10 mW 30 mW 10 mW 30 mW 10 mW 30 mW 10 mW 30 mW 30 mW 30 mW 30 mW 30 mW 30 mW 20 mW 10 mW 20 mW 10 mW 10 mW 10 mW Certifications FP1, FP2, FP3, FP5 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Meets requirements of the following standards: EN 300 422 Parts 1 and 2, EN 301 489 Parts 1 and 9, EN60065. Meets essential requirements of the following European Directives:
R&TTE Directive 99/5/EC WEEE Directive 2002/96/EC, as amended by 2008/34/EC RoHS Directive 2002/95/EC, as amended by 2008/35/EC Note: Please follow your regional recycling scheme for electronic waste FP5 Approved under the Declaration of Conformity (DoC) provision of FCC Part 15. Certified by IC in Canada under RSS-123 and RSS-102. IC: 616A-FP5L, 616A-FP5M, 616A-FP5A, 616A-FP5B, 616A-FP5C LICENSING INFORMATION Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements. Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless microphone equipment is the users responsibility, and licens-
ability depends on the users classification and application, and on the selected frequency. Shure strongly urges the user to contact the appropri-
ate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies. Note: EMC conformance testing is based on the use of supplied and rec-
ommended cable types. The use of other cable types may degrade EMC performance. Changes or modifications not expressly approved by the manufac-
turer could void the users authority to operate the equipment. WARNING: Danger of explosion if battery incorrectly replaced. Operate only with Shure compatible batteries. WARNING: Battery packs shall not be exposed to excessive heat such as sunshine, fire, or the like. FP1, FP2, FP3 Type Accepted under FCC Parts 74. FCC: DD4FP3L, DD4FP3M, DD4FP3A, DD4FP3B, DD4FP3C, DD4SLX1G4, DD4SLX1G5, DD4SLX1, DD4SLX2G4, DD4SLX2G5, DD4SLX2. Certified by IC in Canada under RSS-123 and RSS-102. IC: 616A-FP3L, 616A-FP3M, 616A-FP3A, 616A-FP3B, 616A-FP3C, 616A-SLX1G4, 616A-SLX1G5, 616A-SLX1, 616A-SLX2G4, 616A-SLX2G5, 616A-SLX2. This device complies with Industry Canada licence-exempt RSS standard(s). Operation of this device is subject to the following two condi-
tions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouil-
lage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolec-
trique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. The CE Declaration of Conformity can be obtained from Shure Incorporated or any of its European representatives. For contact informa-
tion please visit www.shure.com The CE Declaration of Conformity can be obtained from: www.shure.com/
europe/compliance Authorized European representative:
Shure Europe GmbH Headquarters Europe, Middle East & Africa Department: EMEA Approval Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone: 49-7262-92 49 0 Fax: 49-7262-92 49 11 4 Email: info@shure.de Information to the user This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 7 8