all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Exhibit D Users Manual per 2 1033 b3 | Users Manual | 2.56 MiB | April 08 2015 | |||
1 2 |
|
Cover Letter Detailing the reason for the filing. | Cover Letter(s) | 138.22 KiB | December 11 2020 / December 18 2020 | |||
1 2 |
|
Cover Letter Requesting Confidentiality | Cover Letter(s) | 92.98 KiB | December 11 2020 / December 18 2020 | |||
1 2 | Exhibit B Schematics Mic | Schematics | December 11 2020 | confidential | ||||
1 2 | Exhibit B Schematics RF | Schematics | December 11 2020 | confidential | ||||
1 2 |
|
Exhibit E Test Measurement Report per 2 1033 c14 | Test Report | 4.18 MiB | December 11 2020 / December 18 2020 | |||
1 2 | Misc Parts List Exhibits Mic | Parts List/Tune Up Info | December 11 2020 | confidential | ||||
1 2 | Misc Parts List Exhibits RF | Parts List/Tune Up Info | December 11 2020 | confidential | ||||
1 2 | Misc Parts List Exhibits audio | Parts List/Tune Up Info | December 11 2020 | confidential | ||||
1 2 | ID Label/Location Info | April 08 2015 | ||||||
1 2 | External Photos | April 08 2015 | ||||||
1 2 | Internal Photos | April 08 2015 | ||||||
1 2 | Test Setup Photos | April 08 2015 | ||||||
1 2 | Test Report | April 08 2015 |
1 2 | Exhibit D Users Manual per 2 1033 b3 | Users Manual | 2.56 MiB | April 08 2015 |
WIRELESS SYSTEM ULX-D USER GUIDE ULX-D Digital Wireless Microphone System ULX-D Digital Wireless-systemen Systme de microphone sans fil numrique ULX-D Digitales drahtloses Mikrofonsystem ULX-D Sistema de micrfonos inalmbricos digitales ULX-D Sistema radiomicrofonico digitale ULX-D Sistema de Microfone Sem Fio Digital ULX-D ULX-D Digital Wireless-systemen ULX-D ULX-D ULX-D ULX-D ULX-D Sistem Mikrofon Nirkabel Digital ULX-D 2014 Shure Incorporated 27A 27230 (Rev. 1) Country Code Code de Pays Codice di paese Cdigo de pas Lnder-Krzel A, B, BG, CH, CY, CZ, D, EST F, GB, GR, H, I, IS, L, LT NL, P, PL, S, SK, SLO DK, FIN, M, N HR, E, IRL, LV, RO, TR All other countries A, B, BG, CH, CY, CZ, D, EST F, GB, GR, H, I, IS, L, LT NL, P, PL, S, SK, SLO DK, FIN, M, N HR, E, IRL, LV, RO, TR All other countries A, B, BG, CH, CY, CZ, D, EST F, GB, GR, H, I, IS, L, LT NL, P, PL, S, SK, SLO RO DK, E, FIN, HR, IRL, LV, M, N, TR All other countries A, B, BG, CH, CY, CZ, D, EST, F, GB, GR, H, I, IS, L, LT, NL, P, PL, S, SK, SLO RO DK, E, FIN, HR, IRL, LV, M, N, TR All other countries N A, B, BG, CH, CY, CZ, D, DK, E, EST F, FIN, GB, GR, H, HR, I, IRL, IS, L, LT LV, M, N, NL, P, PL, S, SK, SLO, TR All other countries ULXD-G51 470 - 534 MHz, max. 20 mW ULXD-H51 534 - 598 MHz, max. 20 mW ULXD-K51 606 - 670 MHz, max. 20 mW ULXD-P51 710 - 782 MHz, max. 20 mW ULXD-R51 800 - 810 MHz, max. 20 mW Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich 470 - 534 MHz *
470 - 534 MHz *
470 - 534 MHz *
*
*
*
534 - 598 MHz *
534 - 598 MHz *
534 - 598 MHz *
*
*
*
606 - 670 MHz *
606 - 670 MHz *
606 - 670 MHz *
646-647;654-655;662-663 MHz*
*
*
710 - 782 MHz *
710 - 782 MHz *
718-719; 726-727; 734-743;
750-751; 758-759 MHz*
*
*
800 - 810 MHz*
*
*
*
*
*
*
*
*
*
*
NOTE: This Radio equipment is intended for use in musical professional entertain-
ment and similar applications. This Radio apparatus may be capable of operating on some frequencies not authorized in your region. Please contact your national authority to obtain information on authorized frequencies and RF power levels for wireless microphone products. REMARQUE : Ce matriel radio est prvu pour une utilisation en spectacles musi-
caux professionnels et applications similaires. Il est possible que cet appareil radio soit capable de fonctionner sur certaines frquences non autorises localement. Se mettre en rapport avec les autorits comptentes pour obtenir les informations sur les frquences et niveaux de puissance HF autoriss pour les systmes de microphones sans fil. HINWEIS: Diese Funkausrstung ist zum Gebrauch bei professionellen Musikveranstaltungen und hnlichen Anwendungen vorgesehen. Dieses Gert kann mglicherweise auf einigen Funkfrequenzen arbeiten, die in Ihrem Gebiet nicht zugelassen sind. Wenden Sie sich bitte an die zustndige Behrde, um Informationen ber zugelassene Frequenzen und erlaubte Sendeleistungen fr drahtlose Mikrofonprodukte zu erhalten. NOTA: Este equipo de radio est destinado para uso en presentaciones musicales profesionales y usos similares. Este aparato de radio puede ser capaz de funcionar en algunas frecuencias no autorizadas en su regin. Por favor comunquese con las autoridades nacionales para informacin sobre las frecuencias autorizadas y los niveles de potencia de radiofrecuencia para micrfonos inalmbricos. NOTA: questo apparecchio radio concepito per l'intrattenimento musicale a livello professionale ed applicazioni simili. Questo apparecchio radio pu essere in grado di funzionare a frequenze non autorizzate nel Paese in cui si trova l'utente. Rivolgetevi alle autorit competenti per ottenere le informazioni relative alle fre-
quenze ed ai livelli di potenza RF autorizzati nella vostra regione per i prodotti radiomicrofonici. OPMERKING: Deze radioapparatuur is bedoeld voor gebruik bij professionele muzikale amusementsproducties en soortgelijke toepassingen. Dit radioapparaat kan mogelijk werken op bepaalde frequenties die niet zijn toegestaan in uw regio. Raadpleeg de autoriteiten in uw land voor informatie over goedgekeurde frequen-
ties en RF-vermogensniveaus voor draadloze microfoons. IMPORTANT SAFETY INSTRUCTIONS 1. READ these instructions. 2. KEEP these instructions. 3. HEED all warnings. 4. FOLLOW all instructions. 5. DO NOT use this apparatus near water. 6. CLEAN ONLY with dry cloth. 7. DO NOT block any ventilation openings. Allow sufficient distances for adequate ventila-
8. DO NOT install near any heat sources such as open flames, radiators, heat registers, tion and install in accordance with the manufacturers instructions. stoves, or other apparatus (including amplifiers) that produce heat. Do not place any open flame sources on the product. 9. DO NOT defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replace-
ment of the obsolete outlet. 10. PROTECT the power cord from being walked on or pinched, particularly at plugs, conve-
nience receptacles, and the point where they exit from the apparatus. 11. ONLY USE attachments/accessories specified by the manufacturer. 12. USE only with a cart, stand, tripod, bracket, or table specified by the manu-
facturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. periods of time. 13. UNPLUG this apparatus during lightning storms or when unused for long CONSIGNES DE SCURIT IMPORTANTES 1. LIRE ces consignes. 2. CONSERVER ces consignes. 3. OBSERVER tous les avertissements. 4. SUIVRE toutes les consignes. 5. NE PAS utiliser cet appareil proximit de l'eau. 6. NETTOYER UNIQUEMENT avec un chiffon sec. 7. NE PAS obstruer les ouvertures de ventilation. Laisser des distances suffisantes pour 8. NE PAS installer proximit d'une source de chaleur telle qu'une flamme nue, un 9. NE PAS dtriorer la scurit de la fiche polarise ou de la fiche de terre. Une fiche permettre une ventilation adquate et effectuer l'installation en respectant les instructions du fabricant. radiateur, une bouche de chaleur, un pole ou d'autres appareils (dont les amplificateurs) produisant de la chaleur. Ne placer aucune source flamme nue sur le produit. polarise comporte deux lames dont l'une est plus large que l'autre. Une fiche de terre comporte deux lames et une troisime broche de mise la terre. La lame la plus large ou la troisime broche assure la scurit de l'utilisateur. Si la fiche fournie ne s'adapte pas la prise lectrique, demander un lectricien de remplacer la prise hors normes. 10. PROTGER le cordon d'alimentation afin que personne ne marche dessus et que rien ne le pince, en particulier au niveau des fiches, des prises de courant et du point de sortie de l'appareil. 11. UTILISER UNIQUEMENT les accessoires spcifis par le fabricant. 12. UTILISER uniquement avec un chariot, un pied, un trpied, un support ou une table spcifi par le fabricant ou vendu avec l'appareil. Si un chariot est utilis, dplacer l'ensemble chariot-appareil avec prcaution afin de ne pas le renverser, ce qui pourrait entraner des blessures. 14. REFER all servicing to qualified service personnel. Servicing is required when the ap-
paratus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the apparatus. 16. The MAINS plug or an appliance coupler shall remain readily operable. 17. The airborne noise of the Apparatus does not exceed 70dB (A). 18. Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a 19. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or 20. Do not attempt to modify this product. Doing so could result in personal injury and/or 21. Operate this product within its specified operating temperature range. protective earthing connection. moisture. product failure. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and mainte-
nance instructions in the literature accompanying this unit. WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. 13. DBRANCHER l'appareil pendant les orages ou quand il ne sera pas utilis pendant longtemps. 14. CONFIER toute rparation du personnel qualifi. Des rparations sont ncessaires si l'appareil est endommag d'une faon quelconque, par exemple : cordon ou prise d'alimentation endommag, liquide renvers ou objet tomb l'intrieur de l'appareil, exposition de l'appareil la pluie ou l'humidit, appareil qui ne marche pas normale-
ment ou que l'on a fait tomber. 15. NE PAS exposer cet appareil aux gouttures et aux claboussements. NE PAS poser des objets contenant de l'eau, comme des vases, sur l'appareil. 16. La prise SECTEUR ou un coupleur dappareil lectrique doit rester facilement utilisable. 17. Le bruit arien de l'appareil ne dpasse pas 70 dB (A). 18. L'appareil de construction de CLASSE I doit tre raccord une prise SECTEUR dote 19. Pour rduire les risques d'incendie ou de choc lectrique, ne pas exposer cet appareil 20. Ne pas essayer de modifier ce produit. Cela risque de causer des blessures et/ou la 21. Utiliser ce produit dans sa plage de tempratures de fonctionnement spcifie. d'une protection par mise la terre. la pluie ou l'humidit. dfaillance du produit. Ce symbole indique la prsence d'une tension dangereuse dans l'appareil constituant un risque de choc lectrique. Ce symbole indique que la documentation fournie avec l'appareil con-
tient des instructions d'utilisation et d'entretien importantes. 3 WICHTIGE SICHERHEITSHINWEISE 1. Diese Hinweise LESEN. 2. Diese Hinweise AUFBEWAHREN. 3. Alle Warnungen BEACHTEN. 4. Alle Hinweise BEFOLGEN. 5. Dieses Gert NICHT in Wassernhe VERWENDEN. 6. NUR mit einem sauberen Tuch REINIGEN. 7. KEINE Lftungsffnungen verdecken. Hinreichende Abstnde fr ausreichende Belftung vorsehen und gem den Anweisungen des Herstellers installieren. 8. NICHT in der Nhe von Wrmequellen wie zum Beispiel offenen Flammen, Heizkrpern, Wrmespeichern, fen oder anderen Hitze erzeugenden Gerten (einschlielich Verstrkern) installieren. Keine Quellen von offenen Flammen auf dem Produkt platzieren. 9. Die Schutzfunktion des Schukosteckers NICHT umgehen. Ein Schukostecker verfgt ber zwei Steckerzinken sowie Schutzleiter. Bei dieser Steckerausfhrung dienen die Schutzleiter Ihrer Sicherheit. Wenn der mitgelieferte Stecker nicht in die Steckdose passt, einen Elektriker mit dem Austauschen der veralteten Steckdose beauftragen. 10. VERHINDERN, dass das Netzkabel gequetscht oder darauf getreten wird, insbesondere im Bereich der Stecker, Netzsteckdosen und an der Austrittsstelle vom Gert. 11. NUR das vom Hersteller angegebene Zubehr und entsprechende Zusatzgerte verwenden. 12. NUR in Verbindung mit einem vom Hersteller angegebenen oder mit dem Gert verkauften Transportwagen, Stand, Stativ, Trger oder Tisch verwenden. Wenn ein Transportwagen verwendet wird, beim Verschieben der Transportwagen/Gerte-Einheit vorsichtig vorgehen, um Verletzungen durch Umkippen zu verhten. HERAUSZIEHEN. 13. Bei Gewitter oder wenn das Gert lange Zeit nicht benutzt wird, das Netzkabel 14. ALLE Reparatur- und Wartungsarbeiten von qualifiziertem Kundendienstpersonal durchfhren lassen. Kundendienst ist erforderlich, wenn das Gert auf irgendwelche Weise beschdigt wurde, z. B. wenn das Netzkabel oder der Netzstecker beschdigt wurden, wenn Flssigkeiten in das Gert verschttet wurden oder Fremdkrper hineinfielen, wenn das Gert Regen oder Feuchtigkeit ausgesetzt war, nicht normal funktioniert oder fallen gelassen wurde. 15. Dieses Gert vor Tropf- und Spritzwasser SCHTZEN. KEINE mit Wasser gefllten Gegenstnde wie zum Beispiel Vasen auf das Gert STELLEN. 16. Der Netzstecker oder eine Gertesteckverbindung muss leicht zu bettigen sein. 17. Der Luftschall des Gerts berschreitet 70 dB (A) nicht. 18. Das Gert mit Bauweise der KLASSE I muss mit einem Schukostecker mit Schutzleiter in eine Netzsteckdose mit Schutzleiter eingesteckt werden. 19. Dieses Gert darf nicht Regen oder Feuchtigkeit ausgesetzt werden, um das Risiko von Brnden oder Stromschlgen zu verringern. 20. Nicht versuchen, dieses Produkt zu modifizieren. Ansonsten knnte es zu Verletzungen und/oder zum Produktausfall kommen. 21. Dieses Produkt muss innerhalb des vorgeschriebenen Temperaturbereichs betrieben werden. Dieses Symbol zeigt an, dass gefhrliche Spannungswerte, die ein Stromschlagrisiko darstellen, innerhalb dieses Gerts auftreten. Dieses Symbol zeigt an, dass das diesem Gert beiliegende Handbuch wichtige Betriebs- und Wartungsanweisungen enthlt. INSTRUCCIONES IMPORTANTES DE SEGURIDAD 1. LEA estas instrucciones. 2. CONSERVE estas instrucciones. 3. PRESTE ATENCION a todas las advertencias. 4. SIGA todas las instrucciones. 5. NO utilice este aparato cerca del agua. 6. LIMPIE UNICAMENTE con un trapo seco. 7. NO obstruya ninguna de las aberturas de ventilacin. Deje espacio suficiente para proporcionar ventilacin adecuada e instale los equipos segn las instrucciones del fabricante. 8. NO instale el aparato cerca de fuentes de calor tales como llamas descubiertas, radiad-
ores, registros de calefaccin, estufas u otros aparatos (incluyendo amplificadores) que produzcan calor. No coloque artculos con llamas descubiertas en el producto. 9. NO anule la funcin de seguridad del enchufe polarizado o con clavija de puesta a tierra. Un enchufe polarizado tiene dos patas, una ms ancha que la otra. Un enchufe con pu-
esta a tierra tiene dos patas y una tercera clavija con puesta a tierra. La pata ms ancha o la tercera clavija se proporciona para su seguridad. Si el tomacorriente no es del tipo apropiado para el enchufe, consulte a un electricista para que sustituya el tomacorriente de estilo anticuado. 10. PROTEJA el cable elctrico para evitar que personas lo pisen o estrujen, particularmente en sus enchufes, en los tomacorrientes y en el punto en el cual sale del aparato. 11. UTILICE nicamente los accesorios especificados por el fabricante. 12. UTILICE nicamente con un carro, pedestal, trpode, escuadra o mesa del tipo especificado por el fabricante o vendido con el aparato. Si se usa un carro, el mismo debe moverse con sumo cuidado para evitar que se vuelque con el aparato. ISTRUZIONI IMPORTANTI PER LA SICUREZZA 1. LEGGETE queste istruzioni. 2. CONSERVATELE. 3. OSSERVATE tutte le avvertenze. 4. SEGUITE tutte le istruzioni. 5. NON usate questo apparecchio vicino all'acqua. 6. PULITE l'apparecchio SOLO con un panno asciutto. 7. NON ostruite alcuna apertura per l'aria di raffreddamento. Consentite distanze sufficienti per un'adeguata ventilazione e installate l'apparecchio seguendo le istruzioni del costrut-
tore. 8. NON installate l'apparecchio accanto a fonti di calore, quali fiamme libere, radiatori, aper-
ture per l'efflusso di aria calda, forni o altri apparecchi (amplificatori inclusi) che generano calore. Non esponete il prodotto a fonti di calore non controllate. 9. NON modificate la spina polarizzata o con spinotto di protezione per non alterarne la funzione di sicurezza. Una spina polarizzata dotata di due lame, una pi ampia dell'altra. Una spina con spinotto dotata di due lame e di un terzo polo di messa a terra. La lama pi ampia ed il terzo polo hanno lo scopo di tutelare la vostra incolumit. Se la spina in dotazione non si adatta alla presa di corrente, rivolgetevi ad un elettricista per far eseguire le modifiche necessarie. denza di spine, prese di corrente e punto di uscita dall'apparecchio. specificati dal costruttore. specificati dal produttore o venduti unitamente all'apparecchio stesso. Se us-
ate un carrello, fate attenzione quando lo spostate con l'apparecchio collocato su di esso, per evitare infortuni causati da un eventuale ribaltamento del carrello stesso. 10. EVITATE di calpestare il cavo di alimentazione o di comprimerlo, specie in corrispon-
11. USATE ESCLUSIVAMENTE i dispositivi di collegamento e gli accessori 12. USATE l'apparecchio solo con carrelli, sostegni, treppiedi, staffe o tavoli 4 13. DESENCHUFE el aparato durante las tormentas elctricas, o si no va a ser utilizado por 14. TODA reparacin debe ser llevada a cabo por tcnicos calificados. El aparato requiere un lapso prolongado. reparacin si ha sufrido cualquier tipo de dao, incluyendo los daos al cordn o enchufe elctrico, si se derrama lquido sobre el aparato o si caen objetos en su interior, si ha sido expuesto a la lluvia o la humedad, si no funciona de modo normal, o si se ha cado. 15. NO exponga este aparato a chorros o salpicaduras de lquidos. NO coloque objetos llenos con lquido, tales como floreros, sobre el aparato. 16. El enchufe de alimentacin o un acoplador para otros aparatos deber permanecer en buenas condiciones de funcionamiento. 17. El nivel de ruido transmitido por el aire del aparato no excede de 70 dB(A). 18. Los aparatos de fabricacin CLASE I debern conectarse a un tomacorriente de ALI-
19. Para reducir el riesgo de causar un incendio o sacudidas elctricas, no exponga este 20. No intente modificar este producto. Hacerlo podra causar lesiones personales y/o la falla 21. Utilice este producto nicamente dentro de la gama de temperaturas de funcionamiento MENTACION con clavija de puesta a tierra protectora. aparato a la lluvia ni a humedad. del producto. especificadas. Este smbolo indica que la unidad contiene niveles de voltaje peligrosos que representan un riesgo de choques elctricos. Este smbolo indica que la literatura que acompaa a esta unidad con-
tiene instrucciones importantes de funcionamiento y mantenimiento. 13. Durante i temporali o in caso di inutilizzo prolungato dell'apparecchio, SCOLLEGATELO dalla presa di corrente. 14. Per qualsiasi intervento, RIVOLGETEVI a personale di assistenza qualificato. neces-
sario intervenire sull'apparecchio ogniqualvolta stato danneggiato, in qualsiasi modo;
ad esempio la spina o il cavo di alimentazione sono danneggiati, si versato liquido sull'apparecchio o sono caduti oggetti su di esso, l'apparecchio stato esposto alla piog-
gia o all'umidit, non funziona normalmente o caduto. sull'apparecchio oggetti pieni di liquidi, ad esempio vasi da fiori. utilizzabile. 15. NON esponete l'apparecchio a sgocciolamenti o spruzzi. NON appoggiate 16. La spina ELETTRICA o l'accoppiatore per elettrodomestici deve restare prontamente 17. Il rumore aereo dell'apparecchio non supera i 70 dB (A). 18. L'apparecchio appartenente alla CLASSE I deve essere collegato ad una presa elettrica 19. Per ridurre il rischio di incendio o folgorazione, non esponete questo apparecchio alla 20. Non tentate di modificare il prodotto. Tale operazione pu causare infortuni e/o il guasto 21. Utilizzate questo prodotto entro la gamma di temperatura operativa specificata. dotata di messa a terra di protezione. pioggia o all'umidit. del prodotto stesso. Questo simbolo indica la presenza di alta tensione all'interno dell'apparecchio, che comporta il rischio di folgorazione. Questo simbolo indica la presenza di istruzioni importanti per l'uso e la manutenzione nella documentazione in dotazione all'apparecchio. IMPORTANTES INSTRUES DE SEGURANA 1. LEIA estas instrues. 2. GUARDE estas instrues. 3. PRESTE ATENO a todas as instrues. 4. SIGA todas as instrues. 5. NO use este aparelho perto de gua. 6. LIMPE SOMENTE com um pano seco. 7. NO bloqueie nenhuma das aberturas de ventilao. Deixe distncias suficientes para 8. NO instale prximo de nenhuma fonte de calor, tais como fogo aceso, radiadores, ventilao adequada e instale de acordo com as instrues do fabricante. bocais de aquecimento, fornos ou outros aparelhos que produzam calor (inclusive ampli-
ficadores). No coloque fontes de chamas sobre o produto. aterramento. Um conector polarizado possui duas lminas com uma mais larga do que a outra. Um conector com pino de aterramento possui duas lminas e um terceiro pino de aterramento. fornecida uma lmina mais larga ou o terceiro pino para a sua segurana. Se por acaso o conector no se encaixar na tomada, chame um eletricista para substituir a tomada obsoleta. 10. PROTEJA o cabo de alimentao, evitando que seja pisado ou que enrosque, especial-
mente nos conectores, nas tomadas eltricas de emprego geral e no ponto onde elas saem do aparelho. 9. NO inutilize as caractersticas de segurana do conector polarizado ou com pino de 11. USE SOMENTE acessrios/apetrechos especificados pelo fabricante. 12. USE somente com um carrinho, pedestal, trip, suporte ou mesa espe-
cificados pelo fabricante ou vendidos com o aparelho. Quando utilizar um carrinho, tenha cuidado ao movimentar o conjunto aparelho/carrinho para evitar danos com a queda do mesmo. 13. DESLIGUE este aparelho da tomada eltrica durante tempestades com relmpagos ou 14. DEIXE toda a manuteno sob a responsabilidade de uma equipe de manuteno quando no seja utilizado por longo perodo. qualificada. necessrio realizar a manuteno quando por algum motivo o aparelho tiver sido danificado de alguma forma, como por exemplo por dano do cabo de alimen-
tao eltrica ou do seu conector, por derramamento de lquido ou queda de objetos no aparelho, se o aparelho tiver sido exposto chuva ou umidade, no esteja operando normalmente ou tenha sofrido queda. lquidos, tais como vasos, sobre o aparelho. para operao. 15. NO exponha o aparelho a respingos ou goteiras. NO coloque objetos cheios de 16. O plugue MAINS (rede eltrica) ou um acoplador de aparelho deve estar sempre pronto 17. O rudo areo do Aparelho no ultrapassa 70 dB (A). 18. O aparelho com construo CLASSE I deve estar conectado tomada da rede eltrica 19. Para reduzir o risco de incndio ou choque eltrico, no exponha este aparelho chuva 20. No tente alterar este produto. Isso poder resultar em leso pessoal e/ou falha do 21. Opere este produto dentro da faixa de temperatura de operao especificada. com ligao terra. ou umidade. produto. Este smbolo indica que existe nesta unidade tenso perigosa que apresenta risco de choque eltrico. Este smbolo indica que existem instrues operao e manuteno importantes na literatura que acompanha esta unidade. BELANGRIJKE VEILIGHEIDSINSTRUCTIES 1. LEES deze instructies. 2. BEWAAR deze instructies. 3. NEEM alle waarschuwingen in acht. 4. VOLG alle instructies op. 5. GEBRUIK dit apparaat NIET in de buurt van water. 6. REINIG UITSLUITEND met een droge doek. 7. DICHT GEEN ventilatieopeningen AF. Zorg dat er voldoende afstand wordt gehouden voor adequate ventilatie. Installeer het product volgens de instructies van de fabrikant. 8. Plaats het apparaat NIET in de buurt van warmtebronnen, zoals vuur, radiatoren, warmteroosters, kachels of andere apparaten (waaronder versterkers) die warmte genereren. Plaats geen vuurbronnen in de buurt van het product. 9. Zorg ervoor dat de beveiliging van de gepolariseerde stekker of randaardestekker INTACT blijft. Een gepolariseerde stekker heeft twee pennen waarbij er n breder is dan de andere. Een randaardestekker heeft twee pennen en een extra aardaansluiting. De breedste pen en de aardaansluiting zijn bedoeld om uw veiligheid te garanderen. Als de meegeleverde stekker niet in de contactdoos past, vraag een elektricien dan om de verouderde contactdoos te vervangen. en uitgangen en op de plaats waar deze het apparaat verlaten. 10. BESCHERM het netsnoer tegen erop lopen of afknelling, vooral in de buurt van stekkers 11. GEBRUIK UITSLUITEND door de fabrikant gespecificeerde hulpstukken/accessoires. 12. GEBRUIK het apparaat UITSLUITEND in combinatie met een door de fabrikant gespecificeerde wagen, standaard, driepoot, beugel of tafel of met een meegeleverde ondersteuning. Wees bij gebruik van een wagen voorzichtig tijdens verplaatsingen van de wagen/apparaat-combinatie om letsel door omkantelen te voorkomen. 13. HAAL de stekker van dit apparaat uit de contactdoos tijdens onweer/bliksem of wanneer het lange tijd niet wordt gebruikt. 14. Laat onderhoud altijd UITVOEREN door bevoegd servicepersoneel. Onderhoud moet worden uitgevoerd wanneer het apparaat op enigerlei wijze is beschadigd, bijvoorbeeld beschadiging van netsnoer of stekker, vloeistof of voorwerpen in het apparaat zijn terechtgekomen, het apparaat is blootgesteld aan regen of vocht, niet naar behoren werkt of is gevallen. 15. STEL het apparaat NIET bloot aan druppelend en rondspattend vocht. PLAATS GEEN voorwerpen gevuld met vloeistof, bijvoorbeeld een vaas, op het apparaat. 16. De NETSTEKKER of een koppelstuk van het apparaat moet klaar voor gebruik zijn. 17. Het door het apparaat verspreide geluid mag niet meer zijn dan 70 dB(A). 18. Apparaten van een KLASSE I-constructie moeten worden aangesloten op een 19. Stel dit apparaat niet bloot aan regen of vocht om het risico op brand of elektrische 20. Probeer dit product niet te wijzigen. Anders kan lichamelijk letsel optreden en/of het 21. Gebruik dit product binnen de gespecificeerde bedrijfstemperaturen. WANDCONTACTDOOS met beschermende aardaansluiting. schokken te verminderen. product defect raken. Dit symbool geeft aan dat in deze eenheid een gevaarlijk spanning aan-
wezig is met het risico op een elektrische schok. Dit symbool geeft aan dat in de documentatie bij deze eenheid belangri-
jke bedienings- en onderhoudsinstructies zijn opgenomen. 1. . 2. . 3. . 4. . 5. . 6. . 7. . ,
,
. 8.
, , , ( ),
. . 9. .
, .
, , .
,
. 10. , ,
, . 11. ,
. 12. , , ,
,
. ,
. 13. 14. .
- , ,
,
- ,
, .
, , . 15. . 16. . 17. 70 (A). 18. I 19. , 20. . () 21. .
,
, .
,
. 5 1. . 2. . 3. . 4. . 5. . 6. . 7. . 8. , , , , ()
. . 9. .
, . 10. ,
. 11. / . 12. , , ,
. ,
. 13. . 6 14. .
, ,
,
. 15. . 16. MAINS . 17. 70dB . 18. CLASS I MAINS 19. . 20. . 21. .
!
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. /
12.
!
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. /
12. 13. 14. 15. 16. 17. 70dB (A) 18. I 19. 20. /
21. 13. 14. 15. 16. 17. 70dB (A) 18. I 19. 20. /
21. PETUNJUK PENTING KESELAMATAN 1. BACA petunjuk ini. 2. SIMPAN petunjuk ini. 3. PATUHI semua peringatan. 4. IKUTI semua petunjuk. 5. JANGAN gunakan perangkat ini dekat dengan air. 6. CUKUP DIBERSIHKAN dengan kain lap kering. 7. JANGAN halangi semua bukaan ventilasi. Biarkan jarak yang cukup dengan lubang 8. JANGAN pasang dekat dengan sumber panas seperti radiator, kisi-kisi tungku pemanas, udara yang cukup dan pasang sesuai petunjuk pabrik. kompor, atau perangkat lain (termasuk amplifier) yang menghasilkan panas. Jangan taruh sumber api terbuka pada produk ini. 9. JANGAN gagalkan tujuan keamanan steker terpolarisasi atau jenis pembumian. Steker terpolarisasi memiliki dua bilah di mana bilah yang satu lebih lebar dari yang lain. Steker jenis pembumian memiliki dua bilah dan tonjolan pembumian ketiga. Bilah yang lebih lebar atau tonjolan ketiga disediakan untuk keselamatan Anda. Jika steker yang dise-
diakan tidak cocok dengan stopkontak Anda, hubungi petugas listrik untuk penggantian stopkontak yang sudah lama itu. 10. LINDUNGI kabel listrik agar aman dari injakan atau jepitan, terutama pada steker, stop-
kontak terbuka, dan titik yang menonjol dari perangkat itu. 11. HANYA GUNAKAN kelengkapan/aksesoris yang ditetapkan pabrik. 12. GUNAKAN hanya dengan kereta dorong, penyangga, tripod, braket atau meja yang ditetapkan oleh pabrikan, atau yang dijual bersama perangkat tersebut. Bila menggunakan kereta dorong, gunakan secara hati-hati ketika memindahkan secara bersama-sama kereta dorong/perangkat tersebut untuk menghindari cedera karena perangkat terguling. 13. CABUT perangkat ini selama petir atau bila tidak digunakan untuk waktu yang lama. 14. SERAHKAN semua servis ke petugas ahli. Servis diperlukan apabila perangkat tersebut sudah rusak dalam cara apapun, seperti kabel catu daya atau steker rusak, cairan ter-
tumpah atau ada benda yang jatuh ke dalam perangkat, perangkat sudah terpapar hujan atau lembab, tidak bekerja normal, atau perangkat pernah jatuh. yang penuh dengan cairan, seperti pot bunga di atas perangkat tersebut. 15. JANGAN paparkan perangkat dengan tetesan dan percikan. JANGAN letakkan benda 16. Steker INDUK atau tusuk kontak harus tetap siap digunakan. 17. Kebisingan Perangkat ini yang bersumber dari udara tidak melebihi 70dB (A). 18. Perangkat dengan konstruksi KELAS I harus dihubungkan ke stopkontak soket INDUK 19. Untuk mengurangi resiko kebakaran atau sengatan listrik, jangan paparkan perangkat ini 20. Jangan coba-coba memodifikasi produk ini. Melakukannya dapat menyebabkan cedera 21. Jalankan produk ini di dalam jarak suhu kerja yang ditetapkan. dengan sambungan pembumian untuk pengaman. dengan hujan atau lembab. diri dan/atau kerusakan produk. Simbol ini menunjukkan bahwa voltase yang berbahaya menimbulkan resiko atau sengatan yang ada di dalam unit ini. Lambang ini menunjukkan bahwa terdapat petunjuk kerja dan pemeli-
haraan penting pada bacaan yang melengkapi unit ini. 7 Quickstart Instructions Instructions de mise en oeuvre rapide Kurzanleitung Instrucciones de arranque rpido Istruzioni di avviamento rapido Instrues para Incio Rpido Petunjuk Memulai Cepat 1 2 a 45 150 mA line mic line mic line mic line mic A a 1-G: 01CH:03 TxOn 2-G: 01CH:06 TxOn 3-G: 01CH:08 TxOn 4-G: 01CH:12 TxOn sync EXIT ENTER EXIT SCAN SCAN control audio gain OL RF A B OL push b GROUP SCAN sync ENTER EXIT SCAN control audio gain OL RF A B OL push b line mic line mic line mic line mic power c line mic line mic line mic line mic Select RX TO SCAN 1 Receiver 2 Receiver 3 Receiver CHANNEL SCAN CROUP SCAN EXIT SCAN EXIT SCAN 3 a b 95A15842 AA SB900 SCAN COMPLETE GROUP: 01 OPEN FREQ: 70 RX CHAN FOUND: 4
!
! ! ! ! ! !!!
!
!!! !
!
! ! !!!!!
!!
!
!
!
!
Deploy Completed 4 of 4 Channels Set SYNC TX NOW c on ULXD2 on 4 a audio gain OL RF A B OL RX1 sync U L X D 2 o n 65A15224 b RX1 audio gain OL RF A B OL RX2 audio gain OL RF A B OL RX3 audio gain OL RF A B OL RX4 RF A B OL audio gain power OL ULXD4Q Digital Wireless Receiver control push ENTER EXIT SCAN
<15 cm (6 in.) ULXD4 Digital Wireless Receiver 8 sync onno2DXLUonULXD1ULXD1ULXD2 ULXD Dual and Quad 900 MHz Full Manual Online This is the quick-reference version of the user guide. For information on the following topics, visit www.shure.com to download the comprehensive manual:
High Density mode Frequency Diversity Audio Summing Encryption Dante digital audio Multiple systems setup RF and hardware presets Networking details Warning Messages AMX and Crestron connections Firmware updates Troubleshooting Product specifications and wiring diagrams Compatible frequencies chart LICENSING INFORMATION Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements. Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless microphone equip-
ment is the users responsibility, and licensability depends on the users classification and application, and on the selected frequency. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies. Information to the user This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada licence-exempt RSS standard(s). Operation of this device is subject to the following two conditions: (1) this de-
vice may not cause interference, and (2) this device must accept any interfer-
ence, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. WARNING: Danger of explosion if battery incorrectly replaced. Operate only with Shure compatible batteries. Note: Use only with the included power supply or a Shure-approved equivalent. WARNING Battery packs may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble, heat above 140F (60C), or incinerate. Follow instructions from manufacturer Only use Shure charger to recharge Shure rechargeable batteries WARNING: Danger of explosion if battery incorrectly replaced. Replace only with same or equivalent type. poison control center Never put batteries in mouth. If swallowed, contact your physician or local Do not short circuit; may cause burns or catch fire Do not charge or use battery packs other than Shure rechargeable batteries Dispose of battery packs properly. Check with local vendor for proper disposal of used battery packs. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like 9 General Description Shure ULX-D Digital Wireless offers uncompromising audio quality and RF performance, with intelligent, encryption-enabled hardware, flexible re-
ceiver options, and advanced rechargeability options for professional sound reinforcement. A breakthrough in wireless audio quality, Shure digital processing enables ULX-D to deliver the purest reproduction of source material ever available in a wireless system, with a wide selection of trusted Shure microphones to choose from. Extended 20 Hz 20 KHz frequency range and totally flat response captures every detail with clarity, presence, and incredibly accurate low end and transient response. At greater than 120 dB, ULX-D delivers wide dynamic range for excellent signal-to-noise performance. For added convenience, pro-
prietary Shure Gain Ranging optimizes the systems dynamic range for any input source, eliminating the need for transmitter gain adjustments. In RF performance, ULX-D sets the bar for spectral efficiency and signal stability. The intermodulation performance of ULX-D is an incredible advance-
ment in wireless performance, enabling a dramatic increase in the number of simultaneous active transmitters on one TV channel. Rock-solid RF signal with no audio artifacts extends over the entire 100-meter line-of-sight range, even using standard dipole antennas. For applications where secure transmission is required, ULX-D offers Advanced Encryption Standard (AES) 256-bit en-
crypted signal for unbreachable privacy. For scalability and modular flexibility, ULX-D receivers come in dual and quad channel versions providing rack-ready conveniences such as RF cascade, in-
ternal power supply, audio output channel summing, and DANTE digital net-
working, which delivers multi-channel audio over Ethernet. All receivers offer High-Density mode for closer-range applications where high channel counts are needed, greatly increasing the amount of simultaneous channels possible over one frequency band. Advanced Lithium-ion rechargeability provides extended transmitter battery life over alkaline batteries, battery life metering in hours and minutes accurate to within 15 minutes, and detailed tracking of battery health status. Combined with the suite of features and benefits ULX-D Digital Wireless Systems offer, the ULXD4D and ULXD4Q receivers are truly generations ahead of any other digital receivers in their class, and bring a new level of per-
formance to professional sound reinforcement. Dual and Quad Receiver Models The ULXD4 receiver is available in dual channel and quad channel models. Both models share the same feature set and functionality, but differ in the number of channels available and the number of audio outputs. The descriptions and procedures in this guide are applicable to either the dual or the quad receiver. ULXD4D Dual Receiver Supports 2 channels of wireless audio. 1 2 ULXD4Q Quad Receiver Supports 4 channels of wireless audio. 1 2 3 4 ULXD4D Digital Wireless Receiver IR control push ENTER EXIT SCAN RX1 audio gain OL RF A B OL RX2 audio gain OL RF A B OL power ULXD4Q Digital Wireless Receiver IR control push ENTER EXIT SCAN RX1 audio gain OL RF A B OL RX2 audio gain OL RF A B OL RX3 audio gain OL RF A B OL RX4 RF A B OL audio gain power OL B Secondary Primary output 2 output 1 A line mic line mic 2 1 B output 4 output 3 output 2 output 1 A Secondary Primary line mic line mic line mic line mic 4 3 2 1 10 Receiver ULXD4Q Digital Wireless Receiver 1 IR 2 3 4 Front Panel Infrared (IR) Sync Window Sends IR signal to the transmitter for sync. Network Icon Illuminates when the receiver is connected with other Shure devices on the network. IP Address must be valid to enable networked control. Encryption Icon Illuminates when AES-256 encryption is activated. LCD Panel Displays settings and parameters. Scan Button Press to find the best channel or group. Menu Navigation Buttons Use to navigate and select parameter menus. Control Wheel Push to select a channel or menu item Turn to scroll through menu items or to edit a parameter value Channel Select Button Press to select a channel. Sync Button Press the sync button while the receiver and transmitter IR windows are aligned to transfer settings from the receiver to the transmitter. RF Diversity LEDs Indicate antenna status:
Blue = normal RF signal between the receiver and transmitter Red = interference detected Off = No RF connection between the receiver and transmitter Note: the receiver will not output audio unless one blue LED is illuminated. 6 ENTER EXIT SCAN 5 control push 7 8 10 12 RX1 RF A B audio gain OL SEL OL RX2 RF A B SEL OL audio gain OL RX3 RF A B SEL OL audio gain OL RX4 RF A B SEL OL audio gain power OL sync sync sync sync 9 11 13 14 RF Signal Strength LEDs Indicate the RF signal strength from the transmitter:
Amber = Normal (-90 to -70 dBm) Red = Overload (greater than -25 dBm) Audio LEDs Description Overload/ limiter Indicate average and peak audio levels:
Audio Signal Level
-0.1 dBFS
-6 dBFS
-12 dBFS
-20 dBFS
-30 dBFS
-40 dBFS LED Red (6) Yellow (5) Yellow (4) Green (3) Green (2) Green (1) Note: In Frequency Diversity mode, simultaneous blinking of the red and yellow audio LEDs indicates that diversity audio has been routed to this channel. Signal Present Normal peaks Gain Buttons Press the gain buttons on the front of the receiver to incrementally ad-
just gain from -18 to +42 dB. Power Switch Powers the unit on or off. B output 4 output 3 output 2 output 1 A Secondary Primary line mic line mic line mic line mic 1 2 3 4 5 4 5 6 7 8 9 4 5 4 5 3 2 Back Panel AC Power Input IEC Connector, 100 - 240 V AC. RF Antenna Diversity Input Jack (2) For antenna A and antenna B. RF Cascade Jack (2) Passes the RF signal from Antenna A and Antenna B to one additional receiver. Mic/Line Switch (one per channel) Applies a 30 dB pad in mic position. Balanced XLR Audio Output (one per channel) Connect to a mic or line level input. Network Status LED (Green) One per network port. Off = no link On = network link Flashing = network link active Ethernet/Dante Network Secondary Port Connect to an Ethernet network to enable remote device control via WWB6 software. Also carries Dante digital audio and control signals for audio distribution, monitoring, and recording - see Dante Network topic. Network Speed LED (Amber) One per network port. Off = 10/100 Mbps On = 1 Gbps Ethernet/Dante Network Primary Port Connect to an Ethernet network to enable remote de-
vice control via WWB6 software. Also carries Dante digital audio and control signals for audio distribution, monitoring, and recording - see Dante Network topic. 11 Receiver Home Screen The home screen displays the following information for each receiver channel:
Group and Channel Transmitter Status: NoTx or TxOn, battery icon/remaining battery life Press the SEL button to access a chan-
nel menu screen. 1 G:01 CH:01 TxOn 2 G:01 CH:02 TxOn 3 G:01 CH:03 TxOn 4 G:01 CH:04 TxOn Receiver Output Level The following table describes the typical total system gain from the audio input to the receiver outputs:
Receiver Output Gain Output Jack XLR (line setting) XLR (mic setting)
*This setting matches a typical wired SM58 audio signal level. System Gain (gain control = 0dB)
+24 dB
-6 dB*
Transmitters Power LED Green = unit is powered on Red = low battery or battery error (see Troubleshooting) Amber = power switch is disabled On/Off Switch Powers the unit on or off. SMA Connector Connection point for RF antenna. LCD Display:
View menu screens and settings. Press any control button to activate the backlight. Infrared (IR) Port Align with the receiver IR port during an IR Sync for automated transmitter programming. Menu Navigation Buttons Use to navigate through parameter menus and change values. Acts as a 'back' button to return to previous menus or pa-
rameters without confirming a value change Enters menu screens and confirms parameter changes Use to scroll through menu screens and to change param-
eter values exit enter Battery Compartment Requires Shure SB900 rechargeable battery or 2 AA batteries. AA Battery Adapter Handheld: rotate and store in the battery compartment to use a Shure SB900 battery Bodypack: remove to accommodate a Shure SB900 battery Bodypack Antenna For RF signal transmission. ULXD1 ULXD2 on Integrated Antenna For RF signal transmission. Microphone Cartridge See Optional Accessories for a list of compatible cartridges. TA4M Input Jack Connects to a 4-Pin Mini Connector (TA4F) microphone or instrument cable. Locking Controls and Settings Use the LOCK feature to prevent accidental or unauthorized changes to the hardware. Receiver Menu path: DEVICE UTILITIES > LOCK Use the control wheel to select and lock any of the following receiver functions. MENU: All menu paths are inaccessible GAIN: Gain adjustment is locked POWER: Power switch is disabled SCN/SYC: Cannot perform a Scan and Sync Tip: To unlock, press the EXIT button, turn the control wheel to select UNLOCKED, and then press ENTER to save. 12 Transmitter Menu path: UTILITY > LOCK Use the transmitter controls to select and lock any of the following transmitter functions. MENU LOCK: All menu paths are inaccessible. POWER LOCK: Power switch is disabled Quick-Lock Option: To turn on the transmitter with its power and menu navi-
gation buttons locked, press and hold the button during power-on until the locked message is displayed. Tip: To unlock the MENU LOCK, press the ENTER button 4 times to pass through the following screens: UTILITY > LOCK > MENU UNLOCK To unlock the POWER LOCK, set the power switch to the off position, then press and hold the button while resetting the power switch to the on position. Menu Screens Receiver Channel TV Channel Displays the TV channel that contains the tuned frequency. High Density Mode Icon Displayed when High Density mode is enabled. Transmitter Status The following text or icons report transmitter status to the receiver screen:
Receiver Information Use DEVICE UTILITIES > HOME INFO to change the home screen display. Display Icon Gain Setting 18 to +42 dB, or Mute. Mic. Offset Indicator Indicates offset gain is added to the transmitter. Transmitter Settings The following information cycles when a transmitter is tuned to the re-
ceiver's frequency:
Transmitter Type Input Pad (Bodypack only) RF Power Level Transmitter Lock Status Transmitter Mute Status Battery Runtime Indicator Shure SB900 battery: runtime is displayed in minutes remaining. AA batteries: runtime is displayed with a 5-bar indicator. Transmitter 1 2 x 3 4 5 6 9 8 7 Transmitter Information Scroll at the home screen to change the display Power Lock Indicator Indicates power switch is disabled Transmitter Audio Muted Indicator Displayed when the transmitter audio is set to off using the MUTE MODE feature. KEEP KEYS. Encrypting Multiple Transmitters to a Single Receiver Multiple transmitters can share the same encryption key, allowing them access to a single receiver. Use this method if you have multiple instruments or wish to use a combination of handheld and bodypack transmitters. 1. From the receiver menu: DEVICE UTILITIES > ENCRYPTION > ON (Manual) >
2. Press ENTER. 3. Perform an IR Sync to share the encryption key with the first transmitter. 4. Turn off the transmitter and perform an IR Sync to share the key additional transmitters. Caution! Make sure only one transmitter is turned on during an IR sync or a performance to avoid causing cross interference between transmitters. Transmitter Status Bodypack input is attenuated 12 dB Offset gain is added to the transmitter 1 mW RF power level 10 mW RF power level 20 mW RF power level Menu is locked Power is locked Displayed when the transmitter audio is set to off using the MUTE MODE feature No RF connection between a receiver and transmitter or transmitter OFF Lo Nm Hi M P TxMuted
-No Tx-
Battery Runtime Indicator Shure SB900 battery: runtime is displayed in hours:minutes remaining AA Batteries: runtime is displayed with a 5-bar indicator Menu Lock Indicator Indicates menu navigation buttons are disabled Mic. Offset Displays microphone offset gain value RF Power Displays RF power setting Bodypack Input Pad The input signal is attenuated 12 dB Encryption Icon Indicates encryption is enabled on the receiver and has been transferred to the transmitter from a sync Regenerating Encryption Keys Periodically regenerating the encryption key maintains security for transmitters and receivers that are paired for extended periods. 1. From the receiver menu: DEVICE UTILITIES > ENCRYPTION > ON (Manual) >
2. Press ENTER. 3. Perform an IR Sync to share the encryption key with the first transmitter. 4. Turn off the transmitter and perform an IR Sync to share the key additional REGENERATE KEYS. transmitters. Caution! Make sure only one transmitter is turned on during an IR sync or a performance to avoid causing cross interference between transmitters. Removing Encryption 1. From the receiver menu: DEVICE UTILITIES ENCRYPTION OFF 2. Press ENTER. 3. IR Sync the transmitter and receiver to clear the encryption key. Note: If multiple transmitters are encrypted to a single receiver, each transmit-
ter must be IR synced to clear the encryption key. 13 Audio Signal Encryption When encryption is enabled, the receiver generates a unique encryption key which is shared with a the transmitter during an IR sync. Transmitters and receivers that share an encryption key form a protected audio path, preventing unauthorized access from other receivers. Encrypting a Single Transmitter to a Single Receiver 1. From the receiver menu: DEVICE UTILITIES > ENCRYPTION > ON (Auto) 2. Press ENTER. 3. Perform an IR Sync to share the encryption key with the selected transmitter. ULXD Specifications Working Range 100 m (330 ft) Note: Actual range depends on RF signal absorption, reflection and interference. Audio Frequency Response 20 20 kHz (1 dB) ULXD1 ULXD2 Note: Dependent on microphone type Audio Dynamic Range System Gain @ +10
>120 dB, A-weighted, typical System Audio Polarity Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output. Operating Temperature Range
-18C (0F) to 50C (122F) Note: Battery characteristics may limit this range. Housing ULXD4D/ULXD4Q Steel; Extruded aluminum ULXD1 Cast aluminum ULXD2 Machined aluminum ULXD4 Power Requirements ULXD4D 100 to 240 V AC, 50-60 Hz, 0.26 A max. ULXD4Q 100 to 240 V AC, 50-60 Hz, 0.32 Amax. Battery Type Shure SB900 Rechargeable Li-Ion or LR6 AA batteries 1.5 V Battery Runtime
@ 10 mW Shure SB900
>11 hours alkaline 11 hours Band G50 G51 G52 H50 H51 H52 J50 K51 L50 L51 P51 R51 JB (Tx only) AB (Rx and Tx) Q51 X50 X51 X52 X53 X54 Frequency Range ( MHz) 470 to 534 470 to 534 479 to 534 534 to 598 534 to 598 534 to 565 572 to 636 606 to 670 632 to 696 632 to 696 710 to 782 800 to 810 806 to 810 770 to 810 794 to 806 925 to 932 925 to 937.5 902 to 928 (All America's except Brazil) 902 to 907.500, 915 to 928 (Brazil) 915 to 928
(Australia) Power ( mW)
(Lo/Nm/Hi) 1/10/20 1/10/20 1/10 1/10/20 1/10/20 1/10 1/10/20 1/10 1/10/20 1/10/20 1/10/20 1/10/20 1/10
'A' Band (770-805): 1/10/20
'B' Band (806-809): 1/10 1/10/20 1/10 10 0.25/10/20 0.25/10/20 0.25/10/20 Certifications ULXD1, ULXD2, ULXD4D, ULXD4Q This product meets the Essential Requirements of all relevant European direc-
tives and is eligible for CE marking. ULXD1, ULXD2 Certified under FCC Part 74. Certified by IC in Canada under RSS-123 and RSS-102. IC: 616A-ULXD1 G50, 616A-ULXD1 H50, 616A-ULXD1 J50, 616A-ULXD1 L50; 616A-ULXD2 G50, 616A-ULXD2 H50, 616A-ULXD2 J50, 616A-ULXD2 L50. FCC: DD4ULXD1G50, DD4ULXD1H50, DD4ULXD1J50, DD4ULXD1L50;
DD4ULXD2G50, DD4ULXD2H50, DD4ULXD2J50, DD4ULXD2L50. Certified under FCC Part 15. Certified by IC in Canada under RSS-102 and RSS-210. IC: 616A-ULXD1X52, 616A-ULXD2X52 FCC: DD4ULXD1X52, DD4ULXD2X52 ULXD4D, ULXD4Q Approved under the Declaration of Conformity (DoC) provision of FCC Part 15. Certified by IC in Canada under RSS-210. IC: 616A-ULXD4D G50, 616A-ULXD4D J50, 616A-ULXD4D L50;
616A-ULXD4Q G50, 616A-ULXD4Q J50, 616A-ULXD4Q L50. Conforms to electrical safety requirements based on IEC 60065. 14 The CE Declaration of Conformity can be obtained from: www.shure.com/
europe/compliance Authorized European representative:
Shure Europe GmbH Headquarters Europe, Middle East & Africa Department: EMEA Approval Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone: 49-7262-92 49 0 Fax: 49-7262-92 49 11 4 Email: EMEAsupport@shure.de Australia Warning for Wireless This device operates under an ACMA class licence and must comply with all the conditions of that licence including operating frequencies. Before 31 December 2014, this device will comply if it is operated in the 520-820 MHz frequency band. WARNING: After 31 December 2014, in order to comply, this device must not be operated in the 694-820 MHz band.
1 2 | Cover Letter Detailing the reason for the filing. | Cover Letter(s) | 138.22 KiB | December 11 2020 / December 18 2020 |
October 26, 2020 Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, Illinois 60515-1082 To Whom It May Concern, SUBJECT: Class II Permissive Change FCC ID: DD4QLXD2X52 Pursuant to KDB178919 D01 v06 section III(D), the Shure Incorporated wireless microphone transmitter FCC ID:DD4QLXD2X52 is substituting a part on the PCB (amplifier chip) due to a part discontinuation. The replacement part has the same basic function as the old part and no change in radio parameters has occurred. New test data was generated in order to verify that there were no significant changes in the radio parameters. The new data meets requirements set out in 47 CFR Section 15.247. Sincerely, Craig Kozokar, Project Engineer Global Compliance Shure Incorporated
1 2 | Cover Letter Requesting Confidentiality | Cover Letter(s) | 92.98 KiB | December 11 2020 / December 18 2020 |
October 19, 2020 Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, Illinois 60515-1082 SUBJECT: REQUEST FOR NON-DISCLOSURE FOR FCC ID: DD4QLXD2X52 To Whom It May Concern, Pursuant to 47 CFR Section 0.459, Shure Incorporated hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application for FCC ID # DD4QLXD2X52 a. Schematic Diagrams b. Operational Description c. Block Diagram d. Parts List e. Tune Up Procedure Above materials contain trade secrets, proprietary and technical information which would customarily be guarded from competitors under 47 CFR section 0.457(d)(2). Disclosure or publication of any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. Shure Incorporated understands that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. Sincerely, Craig Kozokar, Project Engineer Global Compliance Shure Incorporated
1 2 | Exhibit E Test Measurement Report per 2 1033 c14 | Test Report | 4.18 MiB | December 11 2020 / December 18 2020 |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-12-18 | 902.4 ~ 927.6 | DTS - Digital Transmission System | Class II Permissive Change |
2 | 2015-08-04 | 902.4 ~ 927.6 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2020-12-18
|
||||
1 2 |
2015-08-04
|
|||||
1 2 | Applicant's complete, legal business name |
Shure Incorporated
|
||||
1 2 | FCC Registration Number (FRN) |
0012570552
|
||||
1 2 | Physical Address |
5800 W. Touhy Ave
|
||||
1 2 |
Niles, IL
|
|||||
1 2 |
Niles, Illinois 60714-4608
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
r******@elitetest.com
|
||||
1 2 |
d******@elitetest.com
|
|||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
DD4
|
||||
1 2 | Equipment Product Code |
QLXD2X52
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
C**** K********
|
||||
1 2 | Title |
EMC Project Engineer
|
||||
1 2 | Telephone Number |
847-6********
|
||||
1 2 | Fax Number |
847-6********
|
||||
1 2 |
k******@shure.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Shure Incorporated
|
||||
1 2 | Name |
J****** C****
|
||||
1 2 | Physical Address |
5800 W. Touhy Ave.
|
||||
1 2 |
Niles, Illinois 60714
|
|||||
1 2 |
United States
|
|||||
1 2 | Telephone Number |
84760********
|
||||
1 2 |
c******@shure.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Handheld Transmitter | ||||
1 2 | Wireless Microphone Transmitter | |||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Class II Permissive Change | ||||
1 2 | Original Equipment | |||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power output listed is conducted. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. Class II permissive change as indicated in this filing. | ||||
1 2 | Power output listed is conducted. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Shure Incorporated
|
||||
1 2 |
Elite Electronic Engineering Inc.
|
|||||
1 2 | Name |
M******** K******
|
||||
1 2 |
K****** H****
|
|||||
1 2 | Telephone Number |
847-6********
|
||||
1 2 |
630-4******** Extension:
|
|||||
1 2 | Fax Number |
630-4********
|
||||
1 2 |
k******@shure.com
|
|||||
1 2 |
k******@elitetest.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 902.40000000 | 927.60000000 | 0.0100000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 902.40000000 | 927.60000000 | 0.0100000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC