all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manuals | photos |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual 1 | Users Manual | 1.21 MiB | July 02 2008 | |||
1 |
|
User Manual 2 | Users Manual | 43.37 KiB | July 02 2008 | |||
1 |
|
Internal Photos | Internal Photos | 957.42 KiB | July 02 2008 | |||
1 |
|
External Photos | External Photos | 420.99 KiB | July 02 2008 | |||
1 | Cover Letter(s) | July 02 2008 | ||||||
1 | Block Diagram | Block Diagram | February 07 2008 | confidential | ||||
1 | Cover Letter(s) | July 02 2008 | ||||||
1 | Cover Letter(s) | July 02 2008 | ||||||
1 | Cover Letter(s) | July 02 2008 | ||||||
1 | Description | Operational Description | February 07 2008 | confidential | ||||
1 | ID Label/Location Info | July 02 2008 | ||||||
1 | ID Label/Location Info | July 02 2008 | ||||||
1 | Parts List | Parts List/Tune Up Info | February 07 2008 | confidential | ||||
1 | RF Exposure Info | July 02 2008 | ||||||
1 | Schematics | Schematics | February 07 2008 | confidential | ||||
1 | Test Report | July 02 2008 | ||||||
1 | Test Setup Photos | July 02 2008 | ||||||
1 | Tune Up | Parts List/Tune Up Info | February 07 2008 | confidential |
1 | User Manual 1 | Users Manual | 1.21 MiB | July 02 2008 |
Wireless Microphones ULX WIRELESS MICROPHONE SYSTEMS ULX USER GUIDE ULTRA-WIDE BAND FREQUENCY AGILE UHF SYSTEMS 2007, Shure Incorporated 27EN8732F (Rev. 9) Printed in U.S.A. CONTENTS ULX SYSTEM COMPONENTS ..................................................................................................................3 ULXS4 STANDARD RECEIVER FEATURES AND CONTROLS .......................................................................4 Front Panel ......................................................................................................................................................4 Rear Panel .......................................................................................................................................................4 ULXP4 PROFESSIONAL RECEIVER FEATURES AND CONTROLS ...............................................................5 Front Panel ......................................................................................................................................................5 Rear Panel .......................................................................................................................................................5 SINGLE SYSTEM SETUP .......................................................................................................................6 Receiver Connections ........................................................................................................................................6 TIPS FOR ACHIEVING OPTIMUM PERFORMANCE ...................................................................................7 Turning the Receiver On ..........................................................................................................................7 Scanning for the Next Open Channel ...................................................................................................................7 Changing the Receiver Group Setting ..................................................................................................................8 Changing the Receiver Channel Setting ...............................................................................................................8 Adjusting the Receiver Display Contrast ...............................................................................................................9 ULX1 TRANSMITTER FEATURES AND CONTROLS ..................................................................................9 ULX2 TRANSMITTER FEATURES AND CONTROLS .................................................................................10 TRANSMITTER SETUP ........................................................................................................................11 Transmitter Battery Installation .........................................................................................................................11 ULX1 Bodypack Connections ............................................................................................................................11 Turning the Transmitter On ...............................................................................................................................11 Checking Transmitter Battery Power ..................................................................................................................12 ULX1 Bodypack Transmitter Attenuation Settings ...................................................................................12 Setting the Transmitter Operating Frequency ..........................................................................................12 SYSTEM OPERATION ...........................................................................................................................14 Transmitter Gain Adjustment ............................................................................................................................14 Locking Transmitter Frequency Settings ............................................................................................................15 Unlocking Transmitter Frequency Settings .........................................................................................................15 Locking the Power On/Off Switch ......................................................................................................................16 Unlocking the Power On/Off Switch ...................................................................................................................16 ADVANCED PROGRAMMING MODE (ULXP4 MODELS ONLY) Scanning Frequency Groups .........................17 Adjusting the Receiver Squelch Setting .............................................................................................................17 Locking the Receiver .......................................................................................................................................18 Unlocking the Receiver ....................................................................................................................................18 MASTER LIST ......................................................................................................................................19 RECEIVER INSTALLATION ...................................................................................................................19 Table Mounting the ULXS4 Standard Receiver ...................................................................................................19 Rack Mounting a ULXP4 Professional Receiver ..................................................................................................19 Rack Mounting Dual ULXP4 Receivers ..............................................................................................................20 SPECIFICATIONS ................................................................................................................................21 CERTIFICATION ..................................................................................................................................23 REPLACEMENT PARTS ........................................................................................................................23 FURNISHED ACCESSORIES .................................................................................................................23 OPTIONAL ACCESSORIES ....................................................................................................................24 BATTERY LIFE ....................................................................................................................................24 TROUBLESHOOTING ...........................................................................................................................25 LICENSING INFORMATION ..................................................................................................................26 LIMITED TWO-YEAR WARRANTY ..........................................................................................................26 DECLARATION OF CONFORMITY ..........................................................................................................27 2 ULX SYSTEM COMPONENTS ULX1 ULX2 ULXS4 ULXP4 FIGURE 1 or a and a Each Shure ULX Wireless System includes the following components, as shown in Figure 1:
ULX1 Body-Pack Transmitter with a lavalier microphone, instrument adapter cable, or headworn microphone ULX2 Hand-Held Microphone Transmitter with an interchangeable Shure microphone head ULXS4 Standard Diversity Receiver ULXP4 Professional Diversity Receiver with rack-mounting hardware ULXP4D Dual Professional Diversity Receivers with rack-mounting hardware and center link brackets or a or a 3 ULXS4 STANDARD RECEIVER FEATURES AND CONTROLS FRONT PANEL FIGURE 2 RF Indicator. Glows green to indicate presence of received Radio Frequency (RF) signal. 1. 2. TX Audio Level Indicators. Indicate transmitted (TX) audio signal strength. Green indicates normal operation. Amber indicates approaching overload condition. Red indicates excessive audio levels. 3. Receiving Antenna Indicator. Appears on the left or right side of the display, depending on which antenna is receiving the strongest RF signal. 4. GROUP Display. Indicates the pre-selected compatible Frequency Group number in which the system is operating. 5. CHANNEL Display. Indicates the current Channel number within the Frequency Group. 6. Transmitter Battery Life Indicator. Displays the remaining transmitter battery life when the transmitter is turned on. 7. SCAN Indicator. Appears when Scan Channel Mode is active. 8. TV Channel/Volume Level Indicator. Shows volume level and UHF TV channel in small digits (U.S. only). 9. MODE Button. Press this button to step through the display menu. 10. SET Button. Saves the altered setting. 11. Button. Press this button to increase or decrease the Volume level, Group/Channel settings or the display contrast level. 12. Power On/Off Switch. Turns the receiver on and off. REAR PANEL 13. 14. 15. 16. 17. Power Connector. Accepts power from the supplied AC adapter, or from any ltered 1418 Vdc (550 mA minimum) supply. It also accepts dc power from a Shure UA844 Antenna Distribution System. Output Connector (XLR balanced Low Z). Provides balanced lowimpedance mic level or line level output. Mic/Line Switch. Selects output of XLR balanced Low Z connector. It can be set for microphone (27 dBV) or line level (+4.3 dBV). The Mic/Line switch does not affect the output of the unbalanced 1/4 inch phone jack. Output Connector (High Z Unbalanced 1/4 inch Phone Jack). Provides unbalanced high impedance auxiliary level output. Antenna Input Connectors. BNCtype connectors provide connection to the supplied antennas. They also provide 12 Vdc output power for use with remotely located antennas. 4 ULXP4 PROFESSIONAL RECEIVER FEATURES AND CONTROLS FRONT PANEL FIGURE 3 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. Receiving Antenna Indicators. One of these amber LEDs will glow , depending on which antenna is receiving the stron-
gest Radio Frequency (RF) signal. SQUELCH Indicator. Appears when the Squelch Level Mode is selected. SCAN Indicator. Appears when the receiver is scanning for an open Group or Channel. Volume Level Warning Indicator. Indicates a discrepancy between the Volume control knob position and the previously locked Volume Level setting. TV Channel Display. Indicates the UHF TV channel in which the system is operating (U.S. only). Transmitter Battery Life Indicator. Displays the remaining transmitter battery life when the transmitter is turned on. Volume Lock Indicator. Appears after the Volume level setting has been locked. RF Level Indicators. Indicate received RF signal strength. TX Audio Level Indicators. Indicate transmitted (TX) audio signal strength. Green indicates normal operation. Amber indicates approaching overload condition. Red indicates excessive audio levels. GROUP Display. Indicates the pre-selected Frequency Group number in which the system is operating. CHANNEL Display. Indicates the current Channel number within the Frequency Group. FREQUENCY Display. Indicates the current frequency in megahertz (MHz). Frequency Lock Indicator. Appears when the Frequency has been locked. MODE Button. Press this button to step through the display menu. SET Button. Saves the altered setting. Display Control Knob. Rotate this knob to change the Group/Channel settings, the Squelch setting, or to scan a Group or Channel. Level Control. Adjusts the receiver audio output level to match the required input levels of a mixer or ampli er. Nor-
mally, this control is set fully clockwise. Power On/Off Switch. Turns the receiver on and off. REAR PANEL 19. 20. 21. 22. 23. Power Connector. Accepts power from the supplied AC adapter, or from any ltered 1418 Vdc (550 mA minimum) supply. It also accepts DC power from a Shure UA844 Antenna Distribution System. Output Connector (XLR balanced Low Z). Provides balanced lowimpedance mic level or line level output. Mic/Line Switch. Selects output of XLR balanced Low Z connector. It can be set for microphone (27 dBV) or line level
(+4.3 dBV). This switch does not affect the output of the unbalanced 1/4 inch phone jack. Output Connector (High Z Unbalanced 1/4 inch Phone Jack). Provides unbalanced high impedance auxiliary level output. Antenna Input Connectors. BNCtype connectors provide connection to the supplied antennas. They also provide 12 Vdc output power for use with remotely located antennas. 5 SINGLE SYSTEM SETUP RECEIVER CONNECTIONS NOTE:
If you are installing multiple ULXP4 Professional systems, or systems with multiple ULXP4 receiv-
ers, refer also to the Advanced Programming section of this manual. 1. Plug the dc power supply into the power connector on the back of the receiver, as shown in Figure 4. Connect the other end of the power supply into an electrical outlet. 2. Attach the two antennas to the ANTENNA connectors, as shown in Figure 5. The ULXS4 is supplied with 1/4 wave antennas; the ULXP4 is supplied with 1/2 wave antennas. FIGURE 4 ULXS4 ULXP4 3. Connect audio cable(s) (not supplied) from the audio output(s) to the audio input(s) of your audio system, mixer and/or ampli er, as shown in Figure 6. FIGURE 5 ULXP4 ULXS4 FIGURE 6 6 4. If the receiver XLR output is used, make sure the MIC/LINE switch setting matches the input requirements of the mixer or ampli er, as shown in Figure 7. The Mic/Line switch does not affect the output of the unbalanced 1/4 inch phone jack. MIC LINE FIGURE 7 TIPS FOR ACHIEVING OPTIMUM PERFORMANCE Maintain a line of sight between the transmitter and receiver antennas. Avoid placing transmitter and receiver where metal or other dense materials may be present. Avoid placing the receiver near computers or other RF generating equipment such as CD players, DAT machines, and digital signal processors. Avoid placing the receiver in the bottom of an equipment rack unless the antennas are remotely located. Point the receiver antenna tips away from each other at a 45 angle, and keep them away from large metal objects. Do not obstruct the receiver antennas. Use the proper cable when remotely locating receiver antennas. For best performance, use Shure UA825 or UA850 low loss coaxial antenna cable, or 50 ohm low loss cable such as RG-8U. For remote antenna placement, use Shure UA820 1/2 Wave Antenna and UA830 Active Remote Antenna Kits, along with Shure UA844 Antenna Distribution System. Mount diversity antennas at least 1/4 wave apart. This can be achieved by remote placement of one or both 1/2 wave antennas using Shure UA825, UA850, or UA8100 low loss coaxial cable and a Shure UA830 Active Remote Antenna Kit in conjunction with a Shure Antenna Distribution System. For multiple system installations, use the Shure UA844 Antenna/Power Distribution System. Try to maintain a distance of at least 5 meters (15 ft) between the transmitter and receiver. TURNING THE RECEIVER ON NOTE:
These instructions assume no other wireless microphone systems are in use. CAUTION: DO NOT TURN ON THE TRANSMITTER BEFORE POWERING UP THE RECEIVER. TURNING THE TRANSMITTER ON FIRST WILL INTERFERE WITH THE RECEIVERS FREQUENCY SCAN-
NING FUNCTION. Turn the receiver on by pressing the power On/Off switch. The default Group 1 Channel 1 setting will appear on the receiver display, as shown in Figure 8. SCANNING FOR THE NEXT OPEN CHANNEL 1. To enter the Scan Mode, press the MODE button on the receiver once. SCAN CHANNEL will ash on the display, as shown in Figure 9. FIGURE 8 FIGURE 9 7 2. Press the buttons (ULXS4) or rotate the control knob (ULXP4) clockwise one quarter turn. The next open Chan-
nel number will appear on the display, as shown in Figure 10. FIGURE 10 NOTE:
If NO appears on the display, the receiver has not detected an open Channel in the current Group. Change the Group according to the instructions on the following page. After changing the Group, repeat Steps 1 and 2 above. 3. To tune the receiver to the new Channel, press the SET button. The display will return to the default mode, as shown in Figure 11. FIGURE 11 UNLESS THE RECEIVER IS MOVED TO A DIFFERENT LOCATION, THIS PROCEDURE DOES NOT NEED TO BE REPEATED. PROCEED TO TRANSMITTER SETUP SECTION. THE RECEIVER IS NOW READY TO USE. CHANGING THE RECEIVER GROUP SETTING 1. Press the MODE button twice. The word GROUP will ash on the display, as shown in Figure 12. FIGURE 12 2. Press the buttons (ULXS4) or rotate the control knob (ULXP4). The new frequency Group number will appear on the display, as shown in Figure 13. FIGURE 13 3. To tune the receiver to the new Group, press the SET button. The display will advance to the Change Channel mode. Press the MODE button once more to return to the default mode. NOTE:
The receiver always defaults to the rst Channel in any new Group. CHANGING THE RECEIVER CHANNEL SETTING 1. Press the MODE button three times. The word CHANNEL will ash on the display, as shown in Figure 14. FIGURE 14 2. Press the buttons (ULXS4) or rotate the control knob (ULXP4). The new Channel number will appear on the display, as shown in Figure 15. 3. To save the new Channel, press the SET button. The receiver will then return to the default mode. FIGURE 15 8 ADJUSTING THE RECEIVER DISPLAY CONTRAST 1. Press the MODE button for two seconds. LCD will appear on the display, as shown in Figure 16. FIGURE 16 2. Press the buttons (ULXS4) or rotate the control knob (ULXP4) to increase or decrease display contrast, as shown in Figure 17. 3. To save the new Contrast setting, press the SET button. The display will return to the default mode. To return to the default mode without changing the display contrast setting, press the MODE button. ULX1 TRANSMITTER FEATURES AND CONTROLS FIGURE 17 FIGURE 18 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Antenna. A exible 1/4 wave antenna is permanently attached to the top of the ULX1 transmitter. Input Connector. This TA4F miniature four-pin connector mates with a variety of Shure lavalier, instrument and headset microphones and cables. Power ON/OFF Switch. Turns transmitter power on and off. Power/Battery LED. When the Power switch is in the ON position, this LED will glow green, indicating that the trans-
mitter is on. This LED will turn red when the battery is low. Refer to the Checking the Transmitter Battery Power paragraph. Display Window. Displays Group and Channel setting, battery power level, and PEAK indicator. Battery Level Icon. Indicates amount of battery life remaining. PEAK Icon. This icon appears when audio input signal overloads the transmitter. The icon is displayed for 2 seconds after the input overload is detected. GROUP Display. Indicates the frequency Group number in which the transmitter is operating. CHANNEL Display. Indicates the current Channel number within the frequency Group. MODE Button. Selects Group or Channel mode. 9 11. 12. 13. 14. 15. SET Button. Changes Group or Channel setting. Audio Gain Control. Changes the audio level sensitivity to accommodate various sound sources (e.g. loud singing, soft speaking, or musical instrument). Refer to Transmitter Gain Adjustment on Page 14. Input Attenuation Switch. Selects either 0 dB or 20 dB attenuation. Use the 0 dB position for voice and low output instruments. Use the 20 dB pad position for high output instruments such as electric guitars with active electronics. Belt Clip. Allows the transmitter to be worn on a belt, waistband, or guitar strap. Battery Compartment Cover. Hinged cover opens to provide access to 9V battery. ULX2 TRANSMITTER FEATURES AND CONTROLS FIGURE 19 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Indicates amount of battery life remaining. Indicates the current Channel number within the frequency Group. Indicates the frequency Group number in which the transmitter is operating. Displays Group and Channel setting, battery power level, and PEAK indicator. This icon appears when the input signal overloads the transmitter. The icon is displayed for 2 seconds Protects the microphone cartridge and helps reduce breath sounds and wind noise. The grilles of the various Grille. microphone heads differ in appearance. Display Window. Battery Level Icon. PEAK Icon. after input overload is detected. GROUP Display. CHANNEL Display. MODE Button. SET Button. Power/Battery LED. When the Power switch is in the ON position, this LED will glow green, indicating that the trans-
mitter is on. This LED will turn red when the battery is low. Refer to the Checking the Transmitter Battery Power paragraph. Power ON/OFF Switch. Audio Gain Control. soft speaking). Refer to Transmitter Gain Adjustment on Page 14. 9 V Battery. Battery Cover. Changes the audio level sensitivity to accommodate various sound sources (e.g. loud singing or Selects Group or Channel mode. Changes Group or Channel setting. Provides power to the transmitter and microphone. Unscrews to expose battery and Gain control. Turns the transmitter on and off. 10 TRANSMITTER SETUP TRANSMITTER BATTERY INSTALLATION 1. Open the battery cover and insert a fresh 9V alkaline or lithium battery, as shown in Figure 20. ULX1 BODYPACK CONNECTIONS FIGURE 20 1. If you are using a Bodypack system with a Shure lavalier microphone or instrument adapter, plug the microphone cable or instrument adapter cable into the transmitter input connector, as shown in Figure 21. NOTE:
The wiring of the input connector on the transmitter is designed for Shure microphones. TURNING THE TRANSMITTER ON FIGURE 21 NOTE:
DO NOT turn on the transmitter before powering up the receiver. Once the receiver has located an open frequency, turn the transmitter on and set it to that receiver frequency. Turning the transmit-
ter on rst will interfere with the receivers frequency scanning function. 1. Slide the transmitter ON/OFF switch to the ON position, as shown in Figure 22. The power LED will momentarily glow red, then change to a steady green. The default frequency setting (Channel 1, Group 1) will appear on the display. FIGURE 22 11 CHECKING TRANSMITTER BATTERY POWER With the transmitter turned on, observe the Battery Level icon on the display. The number of shaded bars on the icon indicate the approximate amount of battery life remaining, as shown in Figure 23. NOTE:
Stated battery life is based on a 9V alkaline battery. For details on other battery types, refer to the Battery Life paragraph, or go to the Shure web site at www.shure.com and refer to the FAQ sec-
tion. Once the empty battery icon appears, the tone key turns off and the receiver will mute. ULX1 BODYPACK TRANSMITTER ATTENUATION SETTINGS If using a lavalier microphone, make sure the Attenuator switch is in the 0 dB position. If using an instrument adapter cable, slide the Attenuator switch to the 20 dB position. Refer to Figure 24. FIGURE 23 SETTING THE TRANSMITTER OPERATING FREQUENCY 1. Note the Group number and Channel number on the receiver display. Press and hold the MODE button until only the Group number is visible on the transmitter display, as shown in Figure 25. FIGURE 24 2. 3. If necessary, press the transmitter SET button to advance the Group number until it matches the Group number on the receiver display. Press the transmitter MODE button again to select the new Group setting and move to the Channel selection mode. The Group number will disappear, and only the Channel number will be visible. Refer to Figure 26. FIGURE 25 FIGURE 26 12 4. Press the SET button to advance to the desired Channel number, as shown in Figure 27. 5. To reverse the direction of the Group or Channel search, hold down the SET button and press the MODE button. See Figure 28. FIGURE 27 6. Press the MODE button again to select the new Channel setting. FrCh will appear brie y on the display, indicating that the frequency has changed. Then the new Group and Channel settings will appear. Refer to Figure 29. FIGURE 28 7. Make sure the transmitter Group and Channel settings match the receiver Group and Channel settings, as shown in Figure 30. If using the Bodypack transmitter, clip it to your belt, waistband, or guitar strap. ULXS4 ULXP4 FIGURE 29 FIGURE 30 THE TRANSMITTER IS NOW READY TO USE. FOR MULTIPLE SYSTEM INSTALLATIONS, LEAVE THE TRANSMITTER ON, RETURN TO THE BASIC RECEIVER PROGRAMMING, AND REPEAT THE SETUP PROCEDURE FOR EACH SYSTEM. 13 SYSTEM OPERATION Speak into the microphone or play your instrument. If your audio system is properly set and functioning, you should hear the sound of your voice or instrument coming through the loudspeakers. The LEDs on the receiver should also illuminate. The top TX AUDIO LED is red and should only illuminate momentarily when you speak loudly or play your instrument loudly. Refer to Figure 31. ULXS4 ULXP4 TRANSMITTER GAIN ADJUSTMENT If necessary, adjust the transmitter gain with the supplied screwdriver, as shown in Figure 32, until only the green and yellow Audio LEDs on the receiver illuminate when you speak into the microphone or play your instrument. The red LED should only illuminate momentarily when you speak loudly or play your instrument loudly. FIGURE 31 FIGURE 32 14 LOCKING TRANSMITTER FREQUENCY SETTINGS 1. 2. 3. Refer to Figure 33. Slide the transmitter power switch to the OFF position and wait for the display light to turn off. Hold down the SET button. Slide the power switch back to the ON position. Fr L will appear on the transmitter display, indicating that the fre-
quency setting is locked. The locked frequency Group and Channel will then appear. ULX1 3 1 2 ULX2 1 2 4 5 3 4 5 UNLOCKING TRANSMITTER FREQUENCY SETTINGS FIGURE 33 1. 2. 3. Refer to Figure 34. Slide the transmitter power switch to the OFF position and wait for the display light to turn off. Hold down the SET button. Slide the power switch back to the ON position. Fr UL will appear on the transmitter display, indicating that the frequency setting is unlocked. The current frequency Group and Channel will then appear. ULX1 3 1 2 ULX2 1 2 4 5 3 4 5 FIGURE 34 15 LOCKING THE POWER ON/OFF SWITCH 1. 2. Turn the transmitter on by sliding the power switch to the ON position. While holding down the SET button, press and hold the MODE button for four seconds. Po L will appear on the dis-
play. See Figure 35. This display indicates that the Power On/Off switch is locked. The transmitter will remain on, even when the power ON/OFF switch is moved to the OFF position. NOTE:
Make sure both buttons are depressed when trying to lock the transmitter. ULX1 ULX2 1 2 3 1 2 3 UNLOCKING THE POWER ON/OFF SWITCH FIGURE 35 1. 2. Verify that the power transmitter ON/OFF switch is in the ON position. While holding down the transmitter SET button, press and hold the MODE button for four seconds. Po UL will ap-
pear on the display. See Figure 36. This display indicates that the Power On/Off switch is unlocked. The transmitter will then return to normal operating mode. NOTE:
Make sure both buttons are depressed when trying to unlock the transmitter. ULX1 ULX2 1 2 3 1 2 3 FIGURE 36 16 ADVANCED PROGRAMMING MODE (ULXP4 MODELS ONLY) SCANNING FREQUENCY GROUPS 1. Hold down the receiver SET button and press the MODE button once. The words GROUP and SCAN will ash on the display. Refer to Figure 37. 2. To begin scanning, rotate the control knob one quarter turn clockwise, as shown in Figure 38. The receiver will au-
tomatically begin scanning each Channel in all Groups. This may take up to two minutes, and the word BUSY will appear on the display. FIGURE 37 3. When all Groups have been scanned, the Group with the most open Channels will appear on the display, as shown in Figure 39. FIGURE 38 4. To tune the receiver to the new Group, press the SET button. An open Channel in this Group will automatically be scanned and saved in the background. The display will then return to the default mode, as shown in Figure 40. If you choose not to accept the receivers recommended Group, rotate the control knob to the right to scroll through the list of scanned groups. FIGURE 39 FIGURE 40 ADJUSTING THE RECEIVER SQUELCH SETTING The receiver squelch control is factory preset for optimum performance. Normally, no further adjustment is required. How-
ever, it is possible to adjust the squelch control to improve either signal quality or increase system range. NOTE:
Increasing the Squelch level causes the receiver to demand a higher quality signal (less noise be-
fore muting), but it reduces operating range. Decreasing the Squelch level allows a lower quality signal through (more noise before muting), but extends the operating range. 1. Hold down the receiver SET button and press the MODE button twice. SQLCH will ash on the display, as shown in Figure 41. FIGURE 41 17 2. Rotate the control knob. The new Squelch setting will appear on the display, as shown in Figure 42. 3. To accept the new Squelch value, press the SET button. The display will then return to the Default Mode, press FIGURE 42 the MODE button again. LOCKING THE RECEIVER You can lock the ULXP4 receiver frequency and output level to prevent unauthorized or accidental changes to the settings. To access the Lock functions, proceed as follows:
1. Hold down the receiver SET button and press the MODE button three times. Loc will appear on the receiver display. See Figure 43. 2. Rotate the control knob until one or both of the lock icons ashes on the receiver display, as shown in Figure 44. FIGURE 43 3. To activate the ashing lock icon(s), press the SET button. The display will return to the default mode and the lock icon will appear on all display screens. See Figure 44. FIGURE 44 UNLOCKING THE RECEIVER To unlock the ULXP4 receiver frequency and output level settings, hold down the SET button and rotate the control knob one quarter turn left-right-left. The lock icon(s) will disappear, indicating that the receiver is unlocked. See Figure 45. FIGURE 45 NOTE:
If the volume control knob has been set to a level higher than the locked level, the output level will remain locked and the Volume Level warning indicator will ash on the receiver display. See Figure 46. Rotate the volume control knob counterclockwise until the Volume Level warning indi-
cator stops ashing. This will unlock the output level setting. FIGURE 46 FIGURE 47 18 MASTER LIST The Master List is a comprehensive index of all system frequencies offered in the 554590 MHz band, in 25 kHz incre-
ments. To enter or exit the Master List, press and hold the SET button on either the transmitter or receiver for approximately 10 seconds. RECEIVER INSTALLATION TABLE MOUNTING THE ULXS4 STANDARD RECEIVER To mount a ULXS4 Standard receiver on a table or other horizontal surface, attach the four adhesive bumpers to the bottom corners of the receiver and place the receiver on the mounting surface. See Figure 47. NOTE:
The ULXS4 can also be rack mounted, using one of the Rack Mount Kits listed on page 24. RACK MOUNTING A ULXP4 PROFESSIONAL RECEIVER FIGURE 48 Align the supplied rack-mount brackets over the holes on each side of the receiver, as shown in Figure 49. Fasten the brackets to the receiver by installing the eight screws supplied with the mounting brackets. 1. 2. CAUTION: DO NOT OVERTIGHTEN THE SCREWS. DOING SO MAY DAMAGE THE PRINTED CIRCUIT BOARDS. 1/4 IN. FIGURE 49 Slide the receiver into an 19-inch audio equipment rack Secure the rack-mount brackets to the rack using the four supplied screws. If you are not front mounting the antennas, insert the plastic plugs into the bracket holes.
, as shown in Figure 50. 3. 4. 5. NOTE:
Frontmounting the antennas requires the UA600 Front Mount Antenna Kit listed on page 24. FIGURE 50 19 RACK MOUNTING DUAL ULXP4 RECEIVERS 1. 2. Align the receivers side by side so that the front panels both face the same direction. Place the supplied straddle bars in the recesses on the top and bottom of the receivers, so that the bars overlap both receivers. Refer to Figure 51. 1/4 IN. FIGURE 51 3. 4. Secure the straddle bars to the receivers using the supplied screws. CAUTION: Do not overtighten the screws. Doing so may damage the printed circuit boards. Position the rack-mount brackets over the holes in the sides of each receiver, as shown in Figure 52. 5. Secure the brackets to the receivers with the supplied screws. 1/4 IN. 6. 7. Slide the linked receivers into a 19-inch audio equipment rack, as shown in Secure the brackets to the rack using all four of the supplied screws. Figure 53. FIGURE 52 NOTE:
To front mount or combine antennas, use the optional accessories. FIGURE 53 20 SPECIFICATIONS NOTE:
For a list of compatible frequencies that are usable in your area, refer to the supplied frequency supplement. RF Carrier Frequency Range 470.000 to 952.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is used). Refer to the frequency supplement supplied with the system. Effective Range 100 m (300 ft.) under optimal conditions NOTE:
Actual working range depends on RF signal absorption, re ection, and interference Audio Frequency Response 25 to 15,000 Hz, 2 dB NOTE:
Overall system frequency response depends on the microphone element. Transmitter Audio Polarity Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive volt-
age on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output Transmitter Gain Adjustment Range ULX1, ULX2: 25 dB Receiver Audio Output Level (38 kHz deviation, 1 kHz tone) XLR connector (into 600 ohm load): +3.9 dBV (line), 17 dBV (mic) 1/4 inch connector (into 3000 ohm load): 2 dBV Impedance ULX1 (input): 1 Megohm ULXS4, ULXP4 (output): 50 ohms at line level; 2000 ohms at mic level Modulation 38 kHz deviation compressor-expander system with pre- and de-emphasis. RF Power Output ULX1, ULX2: 30 mW maximum (ULX2-G3: 40mW) Dynamic Range
>100 dB, A-weighted RF Sensitivity 1.26 V for 12 dB SINAD (typical) Image Rejection 80 dB typical Spurious Rejection 75 dB typical Ultimate Quieting (reference 38 kHz deviation)
>105 dB, A-weighted System Distortion (reference 38 kHz deviation, 1 kHz modulation) 0.3% total harmonic distortion, typical Power Requirements ULX1, ULX2: 9V alkaline battery; 8.4 V Nicad optional ULXS4, ULXP4: 14 - 18 Vdc (negative ground), 550 mA Battery Life 8 to 9 hours (with 9V alkaline battery) Operating Temperature Range
- 20 to 49 C (- 4 to 120 F) NOTE: Battery characteristics may limit this range. Overall Dimensions ULX1: 96.5 mm H x 67 mm W x 26.7 mm D (3.86 x 2.68 x 1.10 in.) ULX2/SM58: 228.6 L x 51 mm Dia. (9 x 2 in) ULX2/BETA 58: 220.9 mm L x 51 mm Dia. (8.7 x 2 in.) ULX2/SM86: 213 mm L x 49 mm Dia. (8.4 in x 1.9 in) ULX2/87, ULX2/BETA 87: 223.5 mm L x 51 mm Dia. (8.8 x 2 in.) ULX4S: 43 mm H x 214 mm W x 163 mm D (1.72 in. x 8.56 in. x 6.52 in.) ULX4P: 43 mm H x 214 mm W x 172 mm D (1.72 in. x 8.56 in. x 6.88 in.) 21 Net Weight ULX1: 79 g (2.8 oz.) without battery ULX2/58, ULX2/BETA 58: 289 g (10.2 oz.) without battery ULX2/SM86: 251 g (8.8 oz.) without battery ULX2/87, ULX2/BETA 87: 258 g (9.1 oz.) without battery ULXS4: 1049 g (2 lbs, 5 oz.) ULXP4: 1105 g (2 lbs, 7 oz.) MICROPHONE ELEMENT 2 4 3 1 2 4 3 1 ULX1 MIC JACK BOARD 500 27 pF
+5 V 20K 500 27 pF AUDIO GROUND NOTE: LAVALIER MIC TIES PINS 3 AND 4 TOGETHER; THE GUITAR CABLE DOES NOT. ULX1 TRANSMITTER INPUT (FIGURE 54) Connector:
Input Con guration:
Actual Impedance:
Maximum Input Level:
FIGURE 54 TA4F Unbalanced, active 18 k with lavalier microphone 1 M with instrument cable 10 Vpp (12 dBV) for 1% THD at minimum gain setting using 1 kHz signal. TA4F Connector Pin Assignments:
Pin 1: Tied to Ground Pin 2: Tied to +5 V Pin 3: Tied to Audio Pin 4: Tied thru 20k Resistor to Ground. (On instrument adapter cable, Pin 4 oats) Voltage for Remote Power:
+5 V supplied to microphone cartridge ULX1 TRANSMITTER OUTPUT Actual Impedance:
Nominal Output Level:
Maximum Output Level:
Pin Assignments:
ULX2 TRANSMITTER INPUT Input Con guration:
Actual Impedance:
50 20 mW 30 mW Shell = Ground Center = Signal Unbalanced, active 20 k Maximum Input Level:
10 Vpp (12 dBV) for 1% THD at minimum gain setting using 1 kHz signal. ULX2 TRANSMITTER OUTPUT Actual Impedance:
Nominal Output Level:
Maximum Output Level: ULX1, ULX2: 30 mW maximum (ULX2-G3: 40mW) Pin Assignments:
Shell = Ground Center = Signal 50 20 mW ULXS4 AND ULXP4 RECEIVER INPUT Connector:
Connector Type:
Actual Impedance:
Antenna BNC 50 Power Input IEC 320 Nominal Input Level:
Maximum Input Level:
Pin Assignments:
Voltage for Remote Power:
95 to 30 dBm
+6 dBm (20 dBm recommended) Shell = Ground Center = Signal 12 Vdc, 150 mA maximum 15 Vdc 18 Vdc IEC Standard ULXS4 AND ULXP4 RECEIVER OUTPUT Connector:
Output Con guration:
Actual Impedance:
Nominal Input Level:
Pin Assignments:
High Z Audio Unbalanced (1/4 in.) 3 k Tip = Hot Ring/ Sleeve = Gnd Low Z Audio*
Balanced (XLR) 22 1 = Ground Voltage/Current/Phantom Power Protection?
*Output Level: Microphone Level = Line Level 20 dB Yes 2 = Hot 3 = Cold Yes 22 CERTIFICATION O682 ULX1,ULX2 Transmitters: Type Accepted under FCC Part 74 and 90. Certi ed by IC in Canada under RSS-123 and RSS-102. Conforms to European ETSI standards EN-300 422, Parts 1 and 2, and ETS 301 489, Parts 1 and 9. ULX4S, ULX4P Receivers: Authorized under the Declaration of Conformity provision of FCC Part 15A. Certi ed by IC in Canada under RSS-123. Conforms to European ETSI standards ETS 301 489, Parts 1 and 9. The Shure Models ULX1 and ULX2 Transmitters meet the essential requirements of the European R&TTE Directive 99/5/EC and are eligible to carry the CE marking. The Shure Models ULXS4 and ULXP4 Receivers meet the essential requirements of the European R&TTE Directive 99/5/EC and are eligible to carry the CE marking. Conforms to Australian EMC requirements and is eligible for CTick marking. PS40 Power Supply: Conforms to safety standard UL1310. Canada/CSA 22 2 No. 223. PS40AR Power Supply: Conforms to safety standard IEC60065. Certi ed TV Rheinland, Argentina, S.A. No. RA2681022. PS40AZ Power Supply: Conforms to safety standard AS/NZS60065:2003 (Q050515) PS40E Power Supply: Conforms to safety standard EN 60950. PS40UK Power Supply: Conforms to safety standard EN 60950 and BS 7002. REPLACEMENT PARTS Part #
AC Adapter (120 VAC, 60 Hz) . PS40 AC Adapter (220 VAC, 50 Hz) . PS40AR AC Adapter (230 VAC, 50/60 Hz) . PS40AZ AC Adapter (230 VAC, 50/60 Hz, Europlug) . PS40E AC Adapter (230 VAC, 50/60 Hz, UK) . PS40UK AC Adapter (100 VAC, 50/60 Hz) . PS40J SM58 Cartridge with Grille (ULX2/58) . RPW112 BETA 58A Cartridge with Grille (ULX2/BETA 58) . RPW118 SM86 Cartridge with Grille (ULX2/SM86) . RPW114 SM87A Cartridge with Grille (ULX2/87) . RPW116 BETA 87A Cartridge with Grille (ULX2/BETA 87A) . RPW120 BETA 87C Cartridge with Grille (ULX2/BETA 87C) . RPW122 Matte Silver Grille for SM58 . RK143G Matte Silver Grille for SM86 . RPM266 Matte Silver Grille for BETA 58A . RK265G Matte Silver Grille for BETA 87A . RK312 Matte Silver Grille for BETA 87C . RK312 Black Grille for SM87A . RK214G Black Grille for BETA 58A . RPM323G Black Grille for BETA 87A and BETA 87C . RPM324G Belt Clip . 44A8013A 1/4-Wave Antenna (470 - 752 MHz) . 95A8699 1/4-Wave Antenna (774 - 952 MHz) . 95B8699 1/2-Wave Antenna (774 - 865 MHz) . 95F8783 1/2-Wave Antenna (662 - 698 MHz) . 95C8783 1/2-Wave Antenna (554 - 590 MHz) . 95D8783 1/2-Wave Antenna (746 - 784 MHz) . 95E8783 1/2-Wave Antenna (470 - 530 MHz) . 95T9279 1/2-Wave Antenna (944 - 952 MHz) . 95V9279 FURNISHED ACCESSORIES Model #
Microphone Stand Adapter (ULX2). WA371 Grip/Switch Cover (ULX2) . WA555 Zipper Bag (ULX1) . 26A13 Zipper Bag (ULX2) . 26A14 Screwdriver . 80A498 OPTIONAL ACCESSORIES Model #
Passive Antenna Splitter/Combiner Kit . UA221 UHF Line Ampli er . UA830WB UHF Powered Directional Antenna . UA870WB UHF Antenna Power Distribution Ampli er (U.S.A.) . UA844SWB UHF Antenna Power Distribution Ampli er (Europe) . UA844E 23 UHF Antenna Power Distribution Ampli er (UK) . UA844UK 1/4 Wave Antenna (774952 MHz) . UA400A 1/4 Wave antenna (470-752 MHz) . UA400B 1/2 Wave Antenna (774865 MHz) . UA820A 1/2 Wave Antenna (662698 MHz) . UA820C 1/2 Wave Antenna (554590 MHz) . UA820D 1/2 Wave Antenna (746784 MHz) . UA820E 1/2 Wave Antenna (944-952 MHz) . UA820X 1/2 Wave Antenna (470-530 MHz) . UA820G 33 m (100 ft.) BNCBNC cable . UA8100 1.8 m (6 ft.) BNCBNC cable . UA806 Antenna Rack Panel . UA440 Front Mount Antenna Kit (Includes 2 cables and 2 bulkhead adapters) . UA600 Remote Antenna Bracket with BNC Bulkhead Adapter . UA505 Rack Mount Kit for Single Receiver . UA506 Rack Mount Kit for Two Receivers . UA507 Angled Receiver Stand for Ampli er Mounting . WA595 Carrying Case . WA610 Microphone Adapter Cable (XLR) . WA310 BATTERY LIFE Shure recommends using only 9V alkaline or lithium batteries with ULX1 and ULX2 transmitters. Typical life expectancies for the most common types of 9V batteries are listed in the tables below. For detailed information on battery performance, contact your dealer or the Shure Service Department at 1-800-516-2525 (7:30 am to 4:00 pm, Central Standard Time). In Europe, call 49-7131-72140; other international users call Shure in the U.S.A. at 847-600-2000. NOTE:
NOTE:
Batteries stored for more than a year or stored in excessively hot environments may experience a higher failure rate. When using rechargeable batteries, do not use any battery with a fully-charged rating of greater than 9v, for example, 9.6V ULX Transmitters use a DC-to-DC converter, which require a minimum 6 V to operate. It the battery does not provide this thresh-
old voltage, the transmitter will not operate. NON-CHARGEABLE BATTERY Typical Battery Life with ULX TYPE Lithium Alkaline Carbon-Zinc Transmitters 21 hours 8 hours 5 hours RE-CHARGEABLE BATTERY Typical Battery Life with ULX TYPE Ni-Cd Ni-MH Transmitters 2 hours 2.5 hours RECOMMENDED FOR USE WITH ULX TRANSMITTERS?
Yes Yes No RECOMMENDED FOR USE WITH ULX TRANSMITTERS?
No No 24 TROUBLESHOOTING The following table lists some common problems and their solutions. If you are unable to solve a problem, contact your dealer or the Shure Service Department at 1-800-516-2525 (7:30 am to 4:00 pm, Central Standard Time). In Europe, call 49-7131-72140; other international users call Shure in the U.S.A. at 847-600-2000. PROBLEM INDICATOR STATUS RECEIVER ULXS4 ULX4P TRANSMITTER ULX1 ULX2 SOLUTIONS No sound No sound or faint PROBLEM Sound level from the receiver is different from that of a cabled guitar or microphone. Sound level is differ-
ent when you change guitars. Distortion increases gradually. Slide transmitter POWER switch to ON. Make sure battery is inserted properly (+/ battery termi-
nals must match transmitter terminals). Insert fresh battery. Make sure receiver AC adapter is securely plugged into electrical outlet and into DC input connector on rear panel of receiver. Make sure AC electrical outlet works and supplies proper voltage. Make sure receiver is plugged in and the Power switch is in the ON position Make sure transmitter and receiver are set to same frequency Extend receiver antennas so that they point away from each other at a 45 angle from vertical. Move receiver away from nearby metal objects. Remove obstructions and maintain line of sight between transmitter and receiver. Move transmitter closer to receiver. Increase transmitter gain until the Audio Peak icon on the Transmitter ashes on loud peaks. Turn up receiver volume control Check cable connection between receiver and ampli er or mixer. INDICATOR STATUS RECEIVER ULXS4 ULX4P TRANSMITTER ULX1 ULX2 SOLUTIONS Adjust transmitter gain as necessary. Adjust receiver volume as necessary. Adjust transmitter gain to compensate for differences when you change between guitar output levels. Replace transmitter battery. 25 Bursts of noise, dis-
tortion, or other radio performance. Momentary loss of sound as transmit-
ter is moved around performing area
(dropouts) Receiver or Transmit-
ter LCD displays E000 or F000 or similar code instead of the group and channel. If noise occurs when transmitter is turned off, locate and remove nearby RF sources, such as other wireless systems, signals interrupt CB radios, etc. Change the wireless systems operating frequency. Reposition receiver and perform walk-through test. If audio moved around dropouts persist, mark dead spots and avoid them during performing area performance. (drop-
outs). To enter or Receiver or transmitter is in Master List mode. exit the Master List, press and hold the SET button for approximately 10 seconds or until the display changes. LICENSING INFORMATION Changes or modi cations not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless microphone equipment is the users responsibility, and licensability depends on the users clas-
si cation and application, and on the selected frequency. Shure strongly urges the user to contact the appropriate telecom-
munications authority concerning proper licensing, and before choosing and ordering frequencies. IMPORTANT!
NOTE:
THIS EQUIPMENT MAY BE CAPABLE OF OPERATING ON SOME FREQUENCIES NOT AUTHORIZED IN YOUR REGION. PLEASE CONTACT YOUR NATIONAL AUTHORITY TO OBTAIN INFORMATION ON AUTHORIZED FREQUENCIES FOR WIRELESS MICROPHONE PRODUCTS IN YOUR REGION. Frequency Range of ULX Series: 554 MHz865 MHz Licensing: A ministerial license may be required to operate this equipment in certain areas. Consult your national authority for possible requirements. 26 We, of EU DECLARATION OF CONFORMITY Shure Incorporated 5800 Touhy Avenue Niles, Illinois, 60714-4608 U.S.A. Phone: (847) 600-2000 Web: www.Shure.com Declare under our sole responsibility that the following product Description: Body Pack and Handheld UHF Transmitters Model: ULX1, ULX2 Model: ULXS4, ULXP4, ULXP4D Description: UHF Receivers Model: PS40E, PS40UK Description: AC/DC Power Adapter conforms to the essential requirements and other relevant previsions of the R&TTE Directive
(1999/5/EC). The products comply with the following product family, harmonized or national standards:
EN 301 489-1 V1.4.1 (2002-08) EN 301 489-9 V1.2.1 (2002-08) EN 300 422-1 V1.2.2 (2000-08) EN 300 422-2 V1.1.1 (2000-08) In addition, the PS40E and PS40UK products comply with the following product family, harmonized or national standard;
EN60065 EN61000-3-2:2000 Amendment A1:1998; A2:1998; A14:2000 EN 61000-3-3 Amendment A1:2001 The technical documentation is kept at:
Shure Incorporated, Corporate Quality Engineering Division SHURE Europe GmbH, EMEA Approval Manufacturer: Shure Incorporated Signed: __________________________________ Date: 18 January 2005 Name and Title: Craig Kozokar, EMC Project Engineer, Corporate Quality Engineering Divis European Representative: SHURE Europe GmbH Signed: __________________________________ Date: 18 January 2005 Name and Title: Wolfgang Bilz, Dipl. Ing. (FH), EMEA Approval SHURE Europe GmbH Headquarters Europe, Middle East & Africa Wannencker Str. 28 D-74078 Heilbronn, Germany Phone: +49 - (0)7131 - 7214 - 0 Fax:
+49 - (0)7131 - 7214 - 14 27 United States:
Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Europe, Middle East, Africa:
Shure Europe GmbH Wannenckestr. 28, 74078 Heilbronn, Germany Phone: 847-600-2000 Fax: 847-600-1212 Email: info@shure.com Phone: 49-7131-72140 Fax: 49-7131-721414 Email: info@shure.de www.shure.com 2008 Shure Incorporated Asia, Pacific:
Shure Asia Limited Unit 301, 3rd Floor Citicorp Centre 18, Whitfield Road Causeway Bay, Hong Kong Phone: 852-2893-4290 Fax: 852-2893-4055 Email: info@shure.com.hk Canada, Latin America, Caribbean:
Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: 847-600-2000 Fax: 847-600-6446 Email: international@shure.com
1 | User Manual 2 | Users Manual | 43.37 KiB | July 02 2008 |
ULX USER GUIDE SUPPLEMENT:
G3 PUBLIC SAFETY RESTRICTIONS CAUTION: PUBLIC SAFETY RESTRICTIONS Avoid the following groups, channels, and frequency ranges as speci ed for each listed metro region. NOTE: This information is known to be accurate at the time of printing but is subject to change. Check the Shure website for the latest public safety frequency and channel information:
http://www.shure.com/ProAudio/TechLibrary/WirelessFrequencyFinder/index.htm Metro Region Groups, Showing Channels to Avoid G4 G5 G6 G7 G8 G9 G10 1-6, 12 1-5, 9-13 1-5, 11 1-5, 9-11 1-5, 9-13 G1 G2 Boston, MA Ch. 1-8 Chicago, IL, NW Indiana, Ch. 1-8 Cleveland, OH Ch. 1-8 Dallas-Fort Worth, TX Detroit, MI 1-8 1-8 1-8 G3 1-8 1-8 1-8 1-11 1-11 12 7-12 1-8 1-8 9-13 6-13 1-10 1-10 11 9-11 6-11 6-11 Houston, TX Ch. 8-16 13-15 14 12-14 12-16 Los Angeles, CA Ch. 1-8 1-8 1-6, 12 1-5, 9-13 1-5, 11 1-5, 9-11 1-5, 9-13 Miami, FL Ch. 1-8 1-6 1-5 1-5 1-5 Ch. 1-8 1-8 1-12 1-13 1-11 1-11 8-16 20-24 20-24 20-24 22-25 22-25 New York, NY
- Northeastern New Jersey Philadelphia, PA New Jersey San Francisco Oakland, CA Washington, Pittsburgh, PA Ch. 1-8 8-16 1-6, 16-19 1-5, 15-19 1-5, 15-19 1-5, 17-19 Ch. 8-16 1-8 12-15 9-14 11-14 9-16 D.C., Maryland, Ch. 8-16 8-16 13-19 14-19 12-19 Virginia 12-16, 17-19 1-8 1-8 9-13 6-13 14-17 1-5 1-13 1-5, 18-21 9-17 14-21 Frequency
(Mhz) to Avoid TV Channels to Avoid 470-476, 482-488 470-476, 476-482 470-476, 476-482 14, 16 14, 15 14, 15 482-488 16 476-482, 482-488 15, 16 488-494 17 470-476, 482-488, 506-512 14, 16, 20 470-476 14 470-476, 476-482, 482-488 500-506, 506-512 470-476, 494-500 482-488, 488-494 488-494, 494-500 14, 15, 16 19, 20 14, 18 16, 17 17,18 RF CARRIER FREQUENCY RANGE 470.000 to 952.000 MHz (available frequencies depend on the applicable regulations in the country where the system is used). Refer to the frequency supplement supplied with the system. ACCESSORIES Furnished with ULXS4:
Furnished with ULXP4:
UA400B UA820G 1/4 Wave Antenna (470-752Mhz) 1/2 Wave Antenna (470-530Mhz) COMPLIANCE INFORMATION Type accepted under FCC Part 74, FCC ID DD4ULX2G3. Type accepted under FCC Part 74, FCC ID DD4ULX1G3. 2007 Shure Incorporated 27A8895 (Rev. 1) Printed in USA INTER-GROUP AVAILABILITY: ULX G3 470-506 MHZ Please read the Caution: Public Safety Restriction on Page 1. The following table describes compatible Frequencies and Channels available within each group. 2 3 4 5 6 7 l Group 1 TV 14 and 17 e n n a h C TV 15 and 18 TV 16 and 19 470.275 470.725 471.450 471.925 473.900 474.375 475.150 475.650 488.275 488.725 489.450 489.925 491.900 492.375 493.150 493.650 476.275 476.725 477.450 477.925 479.900 480.375 481.150 481.650 494.275 494.725 495.450 495.925 497.900 498.375 499.150 499.650 482.275 482.725 483.450 483.925 485.900 486.375 487.150 487.650 500.275 500.725 501.450 501.925 503.900 504.375 505.150 505.650 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 M1 and J1 bands fully available 470.150 471.025 472.375 473.050 474.150 M1 and J1 bands fully available 470.475 471.800 473.400 474.225 475.725 J1 and G3 bands fully available 470.375 472.200 472.850 473.775 474.325 M1 and G3 bands fully available 470.175 471.425 472.400 473.725 474.225 475.700 476.625 478.700 479.500 479.975 481.475 485.300 491.450 492.350 493.650 494.600 496.100 497.200 499.075 501.200 501.725 502.575 504.975 505.475 478.675 479.350 480.550 482.025 482.650 484.250 485.000 486.175 492.500 495.525 496.025 497.150 497.775 499.225 502.125 502.650 503.600 504.225 505.325 476.800 477.875 478.600 480.050 481.000 482.600 490.525 492.675 493.400 494.500 495.275 496.900 497.375 498.900 500.675 501.575 503.675 504.725 505.550 477.800 479.250 480.000 482.775 483.800 486.650 489.125 490.300 490.875 492.850 493.600 495.950 497.125 499.350 500.100 502.225 503.725 504.875 505.475 8 full G3 spectrum available 470.450 470.925 471.725 473.850 475.350 476.400 479.250 481.525 483.375 484.150 485.450 486.100 487.000 489.600 490.100 490.900 493.475 495.300 498.075 498.950 499.425 502.050 503.325 504.100 505.725 9 full G3 spectrum available 470.325 470.800 471.600 473.725 475.225 476.275 479.125 481.400 483.250 484.025 485.325 485.975 486.875 489.475 489.975 490.775 493.350 495.175 497.950 498.825 499.300 501.925 503.200 503.975 505.600 10 full G3 spectrum available 470.600 471.075 471.875 474.000 475.500 476.550 479.400 481.675 483.525 484.300 485.600 486.250 487.150 489.750 490.250 491.050 493.625 495.450 498.225 499.100 499.575 502.200 503.475 504.250 505.875 2 ULX WIRELESS SYSTEM USER GUIDE SUPPLEMENT 27A8895 (Rev. 1)
1 | Internal Photos | Internal Photos | 957.42 KiB | July 02 2008 |
Company: Shure, Inc. Model: ULX1-G3 FCC ID: DD4ULX1G3 Date: 10-17-07 Photo Description: Back cover removed Company: Shure, Inc. Model: ULX1-G3 FCC ID: DD4ULX1G3 Date: 10-17-07 Photo Description: Audio board removed Company: Shure, Inc. Model: ULX1-G3 FCC ID: DD4ULX1G3 Date: 10-17-07 Photo Description: RF board side 1 Company: Shure, Inc. Model: ULX1-G3 FCC ID: DD4ULX1G3 Date: 10-17-07 Photo Description: RF board side 1 with shield removed Company: Shure, Inc. Model: ULX1-G3 FCC ID: DD4ULX1G3 Date: 10-17-07 Photo Description: RF board side 2 Company: Shure, Inc. Model: ULX1-G3 FCC ID: DD4ULX1G3 Date: 10-17-07 Photo Description: Audio board side 1 Company: Shure, Inc. Model: ULX1-G3 FCC ID: DD4ULX1G3 Date: 10-17-07 Photo Description: Audio board side 2 Company: Shure, Inc. Model: ULX1-G3 FCC ID: DD4ULX1G3 Date: 10-17-07 Photo Description: Audio input board side 1 Company: Shure, Inc. Model: ULX1-G3 FCC ID: DD4ULX1G3 Date: 10-17-07 Photo Description: Audio input board side 2 Company: Shure, Inc. Model: ULX1-G3 FCC ID: DD4ULX1G3 Date: 10-17-07 Photo Description: Inside covers
1 | External Photos | External Photos | 420.99 KiB | July 02 2008 |
Company: Shure, Inc. Model: ULX1-G3 FCC ID: DD4ULX1G3 Date: 10-17-07 Photo Description: Front of unit Company: Shure, Inc. Model: ULX1-G3 FCC ID: DD4ULX1G3 Date: 10-17-07 Photo Description: Back of unit Company: Shure, Inc. Model: ULX1-G3 FCC ID: DD4ULX1G3 Date: 10-17-07 Photo Description: Bottom of unit Company: Shure, Inc. Model: ULX1-G3 FCC ID: DD4ULX1G3 Date: 10-17-07 Photo Description: Top of unit Company: Shure, Inc. Model: ULX1-G3 FCC ID: DD4ULX1G3 Date: 10-17-07 Photo Description: Side of unit
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2008-02-07 | 470.125 ~ 505.875 | TBF - Licensed Broadcast Transmitter Held to Face | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2008-02-07
|
||||
1 | Applicant's complete, legal business name |
Shure Incorporated
|
||||
1 | FCC Registration Number (FRN) |
0012570552
|
||||
1 | Physical Address |
5800 W. Touhy Ave
|
||||
1 |
Niles, IL
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
H******@atcb.com
|
||||
1 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
DD4
|
||||
1 | Equipment Product Code |
ULX1G3
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
C****** K********
|
||||
1 | Title |
EMC Project Engineer
|
||||
1 | Telephone Number |
847-6********
|
||||
1 | Fax Number |
847-6********
|
||||
1 |
k******@shure.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
DLS Electronics
|
||||
1 | Name |
A******** R********
|
||||
1 | Physical Address |
1250 Peterson Drive
|
||||
1 |
Wheeling, Illinois 60090
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
847-5********
|
||||
1 | Fax Number |
847-5********
|
||||
1 |
a******@dlsemc.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | TBF - Licensed Broadcast Transmitter Held to Face | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Microphone Transmitter | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power Output Conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
DLS Electronic Systems, Inc.
|
||||
1 | Name |
W**** S********
|
||||
1 | Telephone Number |
847-5********
|
||||
1 | Fax Number |
847-5********
|
||||
1 |
b******@dlsemc.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 74.861 | M4 | 470.12500000 | 505.87500000 | 0.0260000 | 0.0050000000 % | 120KF3E |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC