all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User guide | Users Manual | 2.64 MiB | January 05 2018 | |||
1 | Cover Letter(s) | January 05 2018 | ||||||
1 | Cover Letter(s) | January 05 2018 | ||||||
1 | External Photos | native | January 05 2018 | |||||
1 | External Photos | native | January 05 2018 | |||||
1 | External Photos | native | January 05 2018 | |||||
1 | External Photos | native | January 05 2018 | |||||
1 | External Photos | native | January 05 2018 | |||||
1 | ID Label/Location Info | January 05 2018 | ||||||
1 | ID Label/Location Info | native | January 05 2018 | |||||
1 | Cover Letter(s) | January 05 2018 | ||||||
1 | Attestation Statements | January 05 2018 |
1 | User guide | Users Manual | 2.64 MiB | January 05 2018 |
Metadata MDA-5 Class B AIS Transceiver /Splitter Installation & Operation Manual Thank you for buying this AIS Class B transceiver. This product has been engineered to offer you the highest level of performance and durability and we hope that it will provide many years of reliable service. We constantly strive to achieve the highest possible quality standards, should you encounter any problems with this product, please contact your dealer who will be pleased to offer whatever assistance you require. Table of figures Figure 1 Items included with the product.................................... 6 Figure 2 AIS transceiver overview.............................................. 8 Figure 3 Electrical connections to the AIS transceiver ............. 10 Figure 4 Typical installation configuration ................................ 11 Figure 5 AIS transceiver dimensions........................................ 14 Figure 6 AIS transceiver mounting ........................................... 15 Figure 7 GPS antenna mounting.............................................. 16 Figure 8 Position of the GPS antenna connector ..................... 17 Figure 9 Position of the VHF antenna connector...................... 18 Figure 10 Earthing the AIS transceiver..................................... 19 Figure 11 VHF antenna and earth stud connection.................. 20 Figure 12 Position of the VHF radio connector......................... 21 Figure 13 Connecting an external switch ................................. 23 Figure 14 Connecting to the NMEA0183 data port................... 24 Figure 15 Connecting the power supply................................... 26 Figure 16 Indicator location on the AIS transceiver unit........... 30 Table of contents 1 - Notices ................................................................................ 1 1.1 - Safety warnings.................................................................. 1 1.2 - General notices .................................................................. 1 2 - About your AIS class B transceiver ................................. 4 2.1 - About AIS ........................................................................... 4 2.2 - Static and dynamic vessel data.......................................... 4 2.3 - Important information for US customers ............................ 5 2.4 - What's in the box?.............................................................. 6 3 - Installation ........................................................................ 11 3.1 - Preparing for Installation .................................................. 11 3.2 - Installation procedures ..................................................... 13 4 - Configuring your AIS transceiver................................... 27 4.1 - Switching on your AIS transceiver for the first time.......... 27 4.2 - Configuring your AIS transceiver ..................................... 27 4.3 - Introduction to proAIS2 .................................................... 28 4.4 - Installing proAIS2 ............................................................ 28 4.5 - Configuration using proAIS2 ............................................ 28 5 - Operation .......................................................................... 29 5.1 - Using the AIS transceiver................................................. 29 5.2 - Switch functions ............................................................... 29 5.3 - Using proAIS2 with your AIS transceiver ......................... 29 5.4 - Indicator functions ........................................................... 30 6 - Troubleshooting............................................................... 32 7 - Specifications................................................................... 33 Notices 1
!
1.1
!
!
Notices When reading this manual please pay attention to warnings marked with the warning triangle shown on the left. These are important messages for safety, installation and usage of the product. Safety warnings This equipment must be installed in accordance with the instructions provided in this manual. This AIS transceiver is an aid to navigation and must not be relied upon to provide accurate navigation information. AIS is not a replacement for vigilant human lookouts and other navigation aids such as RADAR. The performance of the transceiver may be seriously impaired if not installed as instructed in the user manual, or due to other factors such as weather and or nearby transmitting devices. Compatibility with other systems may vary and is reliant on the third party systems recognising the standard outputs from the transceiver. The manufacturer reserves the right to update and change these specifications at any time and without notice. General notices Do not install this equipment in a flammable atmosphere such as in an engine room or near to fuel tanks.
!
1.2 Position source All marine Automatic Identification System (AIS) transceivers utilise a satellite based location system such as the Global Positioning Satellite (GPS) network. The accuracy of a GPS position fix is variable and is affected by factors such as the antenna positioning, how many satellites are used to determine a position and how long satellite information has been received for. Compass safe distance The compass safe distance of this unit is 0.2m or greater for 0.3 deviation. RF emissions notice Caution: The AIS transceiver generates and radiates radio frequency electromagnetic energy. This equipment must be installed and operated according to the instructions contained in this manual. Failure to do so can result in personal injury and / or AIS transceiver malfunction. Caution: Never operate the AIS transceiver unless it is connected to a VHF antenna. Page 1 Notices To maximise performance and minimise human exposure to radio frequency electromagnetic energy you must make sure that the antenna is mounted at least 1.5 metres away from the AIS transceiver and is connected to the AIS transceiver before power is applied. The system has a Maximum Permissible Exposure (MPE) radius of 1.5m. This has been determined assuming the maximum power of the AIS transceiver and using antennas with a maximum gain of 3dBi.The antenna should be mounted 3.5m above the deck in order to meet RF exposure requirements. Higher gain antennas will require a greater MPE radius. Do not operate the unit when anyone is within the MPE radius of the antenna (unless they are shielded from the antenna field by a grounded metallic barrier). The antenna should not be co-located or operated in conjunction with any other transmitting antenna. The required antenna impedance is 50 Ohms. Warranty This product is supplied with standard warranty as defined in the accompanying warranty information.
!
Any attempt to tamper with or damage this product will invalidate the warranty. Disposal of this product and packaging Please dispose of the AIS transceiver in accordance with the European WEEE Directive or with the applicable local regulations for disposal of electrical equipment. Every effort has been made to ensure the packaging for this product is recyclable. Please dispose of the packaging in an environmentally friendly manner. Accuracy of this manual The AIS transceiver may be upgraded from time to time and future versions of the AIS transceiver may therefore not correspond exactly with this manual. Information contained in this manual is liable to change without notice. The manufacturer of this product disclaims any liability for consequences arising from omissions or inaccuracies in this manual and any other documentation provided with this product. Radio Equipment Directive The manufacturer of this product declares that this product is in compliance with the essential requirements and other provisions of the Radio Equipment Directive 2014/53/EU and as such displays the CE mark. The RED declaration of conformity is provided as part of this documentation pack. The declaration of conformity is provided with the product document pack. Page 2 Notices FCC notice This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
!
WARNING: It is a violation of the rules of the Federal Communications Commission to input an MMSI that has not been properly assigned to the end user, or to otherwise input any inaccurate data in this device. Industry Canada notice This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
1. 2. L'appareil ne doit pas produire de brouillage, et L'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le Fonctionnement. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Page 3 About your AIS class B transceiver About your AIS class B transceiver About AIS 2 2.1 The marine Automatic Identification System (AIS) is a location and vessel information reporting system. It allows vessels equipped with AIS to automatically and dynamically share and regularly update their position, speed, course and other information such as vessel identity with similarly equipped vessels. Position is derived from the Global Navigation Satellite System (GNSS) and communication between vessels is by Very High Frequency (VHF) digital transmissions. There are a number of types of AIS device as follows:
Class A transceivers. These are similar to class B transceivers, but are designed to be fitted to large vessels such as cargo ships and large passenger vessels. Class A transceivers transmit at a higher VHF signal power than class B transceivers and therefore can be received by more distant vessels. They also transmit Class A transceivers are mandatory on all vessels over 300 gross tonnes on international voyages and certain types of passenger vessels under SOLAS regulations. Class B transceivers. Similar to class A transceivers in many ways, but are normally lower cost due to the less stringent performance requirements. Class B transceivers transmit at a lower power and at a lower reporting rate than class A transceivers. AIS base stations. AIS base stations are used by Vessel Traffic Systems to monitor and control the transmissions of AIS transceivers. Aids to Navigation (AtoN) transceivers. AtoNs are transceivers mounted on buoys or other hazards to shipping which transmit details of their location to the surrounding vessels. AIS receivers. AIS receivers will generally receive transmissions from class A transceivers, class B transceivers, AtoNs and AIS base stations but do not transmit any information about the vessel on which they are installed. Static and dynamic vessel data This product is an AIS Class B transceiver. 2.2 There are two categories of information transmitted by an AIS transceiver: static and dynamic data. The vessel's dynamic data, which includes location, speed over ground (SOG) and course over ground (COG), is calculated automatically using the internal GPS receiver. Static data is information about the vessel which must be programmed into the AIS transceiver. This includes:
Maritime Mobile Service Identity (MMSI) Vessel name Vessel call sign (if available) Vessel type Vessel dimensions Page 4 About your AIS class B transceiver In most countries the operation of an AIS transceiver is included under the vessel's marine VHF licence provisions. The vessel on to which the AIS unit is to be installed must therefore possess a current VHF radiotelephone licence which lists the AIS system, vessel Call Sign and MMSI number.
!
An MMSI number is required in order for the AIS transceiver to operate. Please contact the relevant authority in your country for more information. Important information for US customers 2.3 There are specific laws in the USA regarding the configuration of AIS class B transceivers. If you are a US resident and intend to use your AIS class B transceiver in US waters, you should make sure that your retailer has configured your product prior to supplying it to you. If your AIS transceiver has not been pre-configured please contact your dealer for details of how to have it configured.
!
In the United States of America, the MMSI and static data must only be entered by a competent installer. The end user of the equipment is not authorised to enter their own vessel data. Page 5 About your AIS class B transceiver 2.4 What's in the box?
Figure 1 shows the items included with your AIS transceiver purchase. The following sections give a brief overview of each item. Please ensure all items are present and if any of the items are not present contact your dealer. Class B AIS transceiver Power and data cable GPS antenna Quick start guide Warranty information Product CD Product manual Fixings kit Figure 1 Items included with the product Accessory cable Page 6 About your AIS class B transceiver Support tools CD The CD supplied with the package contains the following:
-
proAIS2 software tool necessary to configure the AIS transceiver. Please refer to section 4 for details of the configuration process and how to use the proAIS2 tool.
- USB drivers required to connect to the AIS transceiver via USB.
- Alternative language versions of this manual. Quick start guide The quick start guide gives a handy one page reference for the installation process. Product manual This document is the product manual and should be read thoroughly prior to any attempt to install or use the AIS transceiver. Fixing Kit Four fixing screws are provided with the product for mounting of the AIS transceiver. Please refer to section 3.2 for details of how to mount the AIS transceiver. Also provided are a M5 nut and shake proof washer to be used for the Earthing point stud. AIS transceiver unit Figure 2 shows an overview of the AIS transceiver unit. The AIS transceiver has an indicator which provides information to the user about the status of the AIS transceiver. Please refer to section 5.4 for more details of indicator functions. Power, data and USB cable The power and data cable connects to the AIS transceiver and enables connection to power, NMEA0183, external silent mode switch and USB. Accessory cable A VHF radio connection cable is provided with the product. The cable has a PL-259 connector on either end and requires a SO-239 connector on your VHF radio. If your radio does not have a SO-239 connector please contact your dealer for details of suitable adapters.. Page 7 About your AIS class B transceiver Mounting holes Indicator light NMEA 2000 Power and data Figure 2 AIS transceiver overview VHF radio VHF antenna GNSS antenna Page 8 About your AIS class B transceiver Electrical connections The AIS transceiver has the following electrical connections:
Power supply USB for connection to a PC or Mac External switch input for silent mode control NMEA2000 port for connection to NMEA2000 compatible equipment Two independent NMEA0183 data ports for connection to chart plotters and other NMEA0183 compatible equipment Page 9 In addition there are three other connections for the VHF antenna, VHF Radio input and a GNSS antenna. Figure 3 shows an overview of the electrical connections to the AIS transceiver. About your AIS class B transceiver AIS Class B transceiver Power in Switch NMEA0183 device Chartplotter USB NMEA 2000 Figure 3 Electrical connections to the AIS transceiver Page 10 Installation Installation Preparing for Installation 3 3.1 Figure 4 shows a typical installation configuration for the AIS transceiver. Please take the time to familiarise yourself with the system elements and their connections prior to attempting installation. GPS antenna VHF antenna VHF radio Earth bond AIS Class B transceiver Chartplotter Power in Switch USB NMEA 2000 NMEA0183 device Figure 4 Typical installation configuration Page 11 Installation In addition to the items provided with your AIS transceiver the following items will be required for installation:
VHF antenna Connection to a suitable VHF antenna will be required for the AIS transceiver to operate. A standard marine band VHF antenna such as that used with VHF voice radios will be sufficient. Please take note of the warnings in section 1 regarding the use of antennas. Alternatively, if you wish to use an existing VHF antenna, antenna splitter products are available which allow the existing antenna to be used with two radio devices, such as a VHF voice radio and the AIS transceiver. GNSS antenna The transceiver is shipped with a GNSS Antenna an 10m of cable. If this cable is not sufficient to reach between the desired GNSS antenna location and the transceiver you will need an extension cable. (Contact your dealer for details.) Optional switch A switch can be connected to the transceiver to enable and disable 'silent mode' (see section 3.2). A latching toggle switch is required to use this feature. VHF antenna cable Please check that the VHF antenna you intend to use has sufficient cable to reach between the VHF antenna and the AIS transceiver unit. If it is not sufficient you will need an extension cable. Please contact your dealer for details of suitable products. For reference the VHF antenna connector type on the AIS transceiver unit is SO 239, and is intended to mate with a PL 259 connector. VHF Radio Connector Cable This cable is used to connect the VHF radio to the AIS transceiver. If you have an existing VHF voice radio connected directly to the VHF antenna, you can disconnect the VHF radio from the VHF antenna and connect them both to the relevant connectors on the ASIS transceiver. Power and data cable The AIS transceiver unit is supplied with a two metre long power and data cable as an accessory. If you require longer cables to reach your power supply, please ensure the cables are capable of carrying currents of up to 2A peak and 200mA on average. Means of connecting the cables together will also be required. The use of ScotchlokTM connectors is recommended for this purpose. Chart plotter To display received AIS messages as other vessels on your chart plotter, you will need to connect your AIS transceiver to your chart plotter. Please refer to the user manual supplied with your chart plotter for details of how to connect and configure your chart plotter for use with AIS devices. For general guidance your chart plotter should be configured to accept NMEA data at 38400 baud (sometimes referred to as 'NMEA HS' in the plotter configuration menu). You may also need to enable the display of AIS targets in the chart options. Alternatively if you use an NMEA2000 network on your vessel it is possible to connect the AIS transceiver to the NMEA2000 network via a suitable cable. Please refer to your dealer for details of NMEA2000 cables. Page 12 Installation Installation procedures Connection to a PC or Mac If you choose to use a PC or Mac with suitable charting software to display received AIS messages as other vessels, this can be accomplished by connecting the USB connector on the supplied power and data cable. 3.2 Before beginning installation of your AIS transceiver, please ensure you have the necessary additional items as detailed in section 3.1. It is strongly recommended that you read all of the instructions in this manual prior to installation. If after reading this manual you are unsure about any element of the installation process please contact your dealer for advice. The following sections explain the installation process step by step for each of the main elements of the system. Step 1 - Installing the AIS transceiver Please note the following guidelines when selecting a location for your AIS transceiver:
The AIS transceiver must be fitted in a location where it is at least 0.2m from a compass or any magnetic device. There should be adequate space around the AIS transceiver for routing of cables. See Figure 5 for details of the AIS transceiver dimensions. The ambient temperature around the AIS transceiver should be maintained between -25C and +55C. The AIS transceiver should not be located in a flammable or hazardous atmosphere such as in an engine room or near to fuel tanks. The AIS transceiver is fully waterproof to ingress protection rating IPx7, however it is recommended that the AIS transceiver is not subjected to extended periods of exposure to spray or submersion. It is recommended that the AIS transceiver is installed in a 'below decks' environment. It is acceptable to mount the AIS transceiver either vertically or horizontally. The product is supplied with four self tapping screws for attachment of the AIS transceiver to a suitable surface. Please refer to Figure 6 for guidance. The AIS transceiver should be mounted in a location where the indicator is readily visible as this provides important information on the status of the AIS transceiver. Page 13 122 mm m m 3 1 1 m m 3 3 1 172 mm Figure 5 AIS transceiver dimensions Installation Page 14 Installation Figure 6 AIS transceiver mounting Page 15 Installation Step 2 - Installing the GNSS antenna For mounting of the GNSS antenna you will require a one inch 14 TPI thread pole. You should ensure the GNSS antenna has a good clear view of the entire sky. It is not recommended that the GNSS antenna is mounted up a mast where the motion of the vessel will cause the antenna to swing and potentially reduce the accuracy of the GNSS position. Do not mount your antenna in the direct path of a radar transmitter. Feed the ten metre long cable attached to the GNSS antenna cable through the pole and screw the antenna onto the pole mount as shown in Figure 7. Route the cable to your AIS transceiver unit, adding any necessary extension cables. Connect the cable from the GNSS antenna to the GNSS connector on the AIS transceiver as shown in Figure 8. Figure 7 GPS antenna mounting Page 16 Installation Figure 8 Position of the GPS antenna connector GNSS antenna Page 17 Step 3 - Connecting the VHF antenna Route the cable from the VHF antenna to the AIS transceiver and connect to the VHF connector on the AIS transceiver as shown in Figure 9. A standard marine band VHF antenna or AIS antenna should be used with the AIS transceiver. The connector type on the AIS transceiver is SO239. Your chosen VHF antenna requires a PL259 connector to mate with this. If your VHF antenna does not use this type of connector please contact your dealer for details of available adaptors. Installation Figure 9 Position of the VHF antenna connector VHF antenna Page 18 Installation Step 4 - Earthing the AIS Transceiver A M5 earthing connection point stud is provided adjacent to the VHF antenna connector. There is also a M5 nut and shake-proof washer provided in the fixing kit to allow connection to the earthing connection point as indicated in Figure 10. Earth connecton point stud Figure 10 Earthing the AIS transceiver
!
This product must be connected to protective ground via the earth connection point. It is essential that the earth connection point is used in all installations, regardless of what other equipment is connected. The earth connection point must be bonded to protective earth using as short a connection as possible. It is also strongly recommended that a surge arrestor is included in-line with your VHF antenna. The correct earthing arrangement is shown in Figure 11. Page 19 Installation
!
This product MUST be connected to protected earth via the earth connection point. VHF antenna and earth stud connection Figure 11 Step 5 - Connecting the VHF radio. Using the VHF radio accessory cable provided with this product, route the cable from the VHF radio to the AIS transceiver and connect to the AIS transceiver as shown in Figure XX. If the cable supplied is not long enough, please contact your dealer for details of suitable extension cables. Page 20 Installation A standard marine band VHF voice radio should be used with the AIS transceiver. The AIS transceiver is DSC compatible. Figure 12 Position of the VHF radio connector VHF radio Page 21 Installation Step 6 - Connecting the accessory cable An accessory cable is supplied with the product to provide connections to power, the external switch, the NMEA0183 data ports and USB. The cable has a pre-moulded connector at one end which should be connected to the connector on the unit marked 'PWR/DATA'. The other end of the cable has eight colour coded bare wires ready for connection and a USB connector for use with a PC or Mac. The table below in Figure 1 lists the function of each colour coded wire for reference. Wire colour Description Function Red Black Green Orange Brown Blue Purple Yellow Power in +
Power in -
Switch input-
Switch input+
NMEA0183 port 1 TX+
NMEA0183 port 1 TX-
NMEA0183 port 2 RX+
NMEA0183 port 2 RX-
Table 1 Colour coding of wires in the accessory cable Power supply connections External switch connection for silent mode High speed NMEA0183 output (38,400baud) intended for connection to chart plotters Low speed NMEA0183 input (4,800baud) intended for connection to other NMEA0183 compatible sensors for multiplexing of data to the chart plotter
!
Please check your wiring very carefully before applying power to the product. Failure to wire the product correctly could result in permanent damage. Page 22 Installation Step 7 - Connecting an external switch A toggle switch can be connected to the AIS transceiver to provide remote control of silent mode. Connect the toggle switch between the light green and orange wires as shown in Figure 13. Connection of an external switch to toggle silent mode is optional and not essential for normal operation of the product. Do not connect a voltage source across the switch inputs as this may damage the transceiver.
!
Red Black Green Orange Brown Blue Purple Yellow Power in +
Power in Switch input +
Switch input Transmit +
Transmit Receive +
Receive USB NMEA0183 38,400 Baud NMEA0183 4,800 Baud Figure 13 Connecting an external switch Page 23 Installation Step 8 - Connecting to NMEA0183 compatible equipment The two independent NMEA0183 data ports provide connection to your chart plotter and other NMEA0183 compatible equipment. Each port consists of two wires colour coded as shown in the table in Figure 14 and in the diagram in Figure 14. Connect the wires to the appropriate connections on your NMEA0183 compatible equipment. Please refer to your equipment manual for more information. The AIS transceiver has a high speed output port which operates at 38,400baud and a low speed input port which operates at 4,800baud. The high speed port is intended primarily to connect to a chart plotter, while the low speed port is intended to connect to other NMEA0183 devices. A multiplexing feature is provided, which means any messages which are received via the low speed port are automatically transmitted via the high speed port. This is particularly useful when using a chart plotter having only a single NMEA0183 port. An additional sensor such as a gyro-compass can be connected to the AIS transceiver via the low speed port and the AIS transceiver can be connected via the high speed port to the chart plotter resulting in the chart plotter receiving both AIS information and heading information simultaneously. Please ensure your equipment is configured to use the correct baud rate for the port it is connected to. Red Black Green Orange Brown Blue Purple Yellow Power in +
Power in Switch input +
Switch input Transmit +
Transmit Receive +
Receive USB NMEA0183 38,400 Baud NMEA0183 4,800 Baud Figure 14 Connecting to the NMEA0183 data port Page 24 Installation Step 7- Connection to an NMEA2000 network (optional) The AIS transceiver can be connected to an NMEA2000 network by a suitable NMEA2000 network cable available from your local dealer. If your vessel has an NMEA2000 network please refer to the relevant documentation for your NMEA2000 equipment. Once connected, and with your chart plotter also connected to your NMEA2000 network you will be able to receive AIS targets on your chart plotter. Step 8 - USB Connection (optional) The AIS transceiver is supplied with a USB port for connection to a computer. The USB connector can be connected directly to the USB port on the computer via the supplied USB cable. To enable connection of the AIS transceiver to a computer the USB drivers must first be installed. This is done automatically when installing proAIS2 or by using Windows update. Driver installation is typically not required for use with OSX.
!
If the USB connection is removed from the computer during use you must reset the connection before further use. To reset the connection, disconnect then reapply power to the AIS before closing and relaunching any computer applications using the USB connection. Finally, reconnect the USB cable between the computer and the AIS transceiver. Page 25 Step 9 - Connecting to a power supply The AIS transceiver requires a 12V or 24V power supply typically provided by the vessel's battery. It is recommended that crimped and soldered lugs are used to connect the AIS transceiver to the power source. It is recommended that the power supply is connected via a suitable circuit breaker and/or 3A fuse block. 1. Connect the red wire to a 12V or 24V power supply positive terminal. 2. Connect the black wire to the supply negative terminal. Installation Red Black Green Orange Brown Blue Purple Yellow Power in +
Power in Switch input +
Switch input Transmit +
Transmit Receive +
Receive USB NMEA0183 38,400 Baud NMEA0183 4,800 Baud Figure 15 Connecting the power supply Page 26 Configuring your AIS transceiver Configuring your AIS transceiver Switching on your AIS transceiver for the first time 4 Until correctly configured your AIS class B transceiver will only receive AIS messages and will not transmit AIS messages. 4.1 A few seconds after power is applied to the AIS transceiver, the status indicator will flash red then after a few seconds will go amber. The amber condition continues until the tranceiver has aquired a GNSS fix and transmitted an AIS position report. This could take up to 2 minutes. When the first AIS position report has been transmitted by the transceiver the indicator will turn green. Table 2 shows the functions of the four indicator colours. Indicator Green Amber Red Blue Table 2 Indicator functions Function Unit is powered up and operating normally Unit is in a 'transmit timeout' period Unit has experienced an error Silent mode is activated Configuring your AIS transceiver 4.2 There are two potential ways in which your AIS transceiver can be configured:
1. Configuration in advance by your dealer or installer. If your AIS transceiver has been configured for you by your dealer or installer you can proceed to section 5. 2. Configuration using proAIS2 Providing it is acceptable to do so under your local legislation it is possible to configure your AIS transceiver yourself using the proAIS2 software provided with the product.
!!
US Customers only: It is a violation of the rules of the Federal Communications Commission for the end user to programme the vessel data. The vessel data must only be programmed by a competent installer. If your AIS transceiver has not been pre-configured for you please refer to your dealer for advice on how to have the AIS transceiver configured by a competent installer. Page 27 Configuring your AIS transceiver Installing proAIS2 Introduction to proAIS2 Insert the CD into your PC or Mac then locate and run the setup.exe file on the CD and then follow the on-screen prompts. If a security warning appears, click 'Install' to continue with the installation. 4.3 Included in the CD supplied with your product is a software tool called 'proAIS2'. proAIS2 provides the facility to configure, monitor and diagnose issues with your AIS transceiver. proAIS2 can provide assistance when ensuring that a satisfactory GPS signal is being received. It can also display alarm messages generated by the transceiver regarding poor VHF antenna quality or that the power being supplied is outside the range specified for operation. proAIS2 can also be used to activate 'silent mode' which disables AIS transmissions. Section 4.4 provides instructions on how to install proAIS2. Section 4.5 provides instructions on how to configure the AIS transceiver using proAIS2. Further help on how to use the features of proAIS2 can be found in the 'Help menu within the proAIS2 tool. proAIS2 is designed to be installed and used with a PC or Mac connected to the AIS transceiver via USB using the supplied USB cable. 4.4 1. 2. 3. Once installation is complete, proAIS2 will launch automatically and a start menu folder and shortcut will be created for future use. 4.5 For configuration purposes only, it is possible to power the AIS transceiver via its USB connection. This is useful if you wish to configure your AIS transceiver away from the vessel power supply. The AIS transceiver will not transmit any data or acquire a GPS position fix whilst powered by USB. You will require the following information in order to configure your AIS transceiver:
MMSI Vessel name Vessel type Call sign Vessel dimensions and position of your GPS antenna installation. For further assistance in configuring your AIS transceiver please refer to the Help menu within proAIS2. Configuration using proAIS2
!
Please ensure that you enter all vessel data accurately. Failure to do so could result in other vessels failing to identify your vessel correctly. The vessel MMSI can only be programmed once using proAIS2, please take care to programme your MMSI correctly. If you need to change the MMSI for any reason, please contact your dealer who will arrange to have the MMSI reset. Page 28 Operation Operation Using the AIS transceiver 5 5.1 Once the unit has been configured it is ready for use. Providing other vessels with AIS transceivers installed are within radio range of your vessel you should see their details appear on your chart plotter or PC. These vessels will also be able to see your vessel on their chart plotter or PC. It may take up to six minutes for your full vessel details to be visible to others. Specific details of how to configure your chart plotter to make use of the AIS transceiver features will be given in your chart plotter manual. If you are using charting software running on a PC, please refer to the instructions provided with your chart plotting software for details of how to configure it to display AIS information. 5.2 When connected to the AIS transceiver following the instructions in section 3.2 an external switch provides the ability to set the AIS transceiver into 'silent mode'. In silent mode the transmission of your own vessel position ceases, whilst the reception of other vessel's AIS position continues. You should use silent mode if you do not wish your vessel data to be received by other AIS devices. When silent mode is active the blue indicator will be illuminated. Switch functions
!
When silent mode is active other vessels will not be able to receive your vessel information on their AIS devices. Your navigational safety may be compromised as a result. Using proAIS2 with your AIS transceiver 5.3 The proAIS2 tool has a range of features to help monitor the performance of your AIS transceiver. To use the full range of features your AIS transceiver must be installed as described in section 3 and connected to a PC running the proAIS2 application. Follow the instructions provided in the help menu within proAIS2. Page 29 Indicator functions 5.4 The AIS transceiver includes a coloured indicator as shown in Figure 16. The state of the indicator provides information regarding the status of the AIS transceiver. Indicator light Operation Figure 16 Indicator location on the AIS transceiver unit Page 30 Operation The meaning of typical indicator configurations is shown in the table below and Figure 16 shows the orientation of the AIS transceiver. Green indicator only The AIS transceiver is powered up, has a position fix and has transmitted at least one vessel information report. Red indicator only The AIS transceiver has detected a system error. The likely causes of this are detailed in the troubleshooting guide in section 6. Diagnostic messages displayed in proAIS2 may also help troubleshoot the cause of the error. Blue indicator When silent mode is activated using the optional silent mode switch the blue indicator is illuminated to show that the transmitter is disabled. Amber indicator only The AIS transceiver is in 'transmit timeout' mode. This can be for a number of reasons:
The unit has only recently been powered on and is obtaining a position fix prior to transmitting its first vessel information report. (This process can take several minutes). Position fix has been lost. The AIS transceiver will attempt to regain position fix for 30 minutes before entering an error state. The AIS radio channels are exceptionally busy so there is currently no available timeslot for transmission. The unit has been in silent mode and after deactivating silent mode this amber indicator will illuminate until the first AIS message has been sent The AIS transceiver has been commanded by the local authority (via an AIS base station) to cease transmissions. Page 31 Troubleshooting 6 Troubleshooting Issue Possible cause and remedy No data is being received by the chart plotter No indicators are illuminated The Red 'error' indicator is illuminated Check that the power supply is connected correctly. Check that the power supply is a 12V or 24V supply. Check that the connections to the chart plotter are correct. Check that the power supply is connected correctly. Check that the power supply is a 12V or 24V supply. The unit may not have a valid MMSI. Check that the AIS transceiver is correctly configured with a valid MMSI. The VHF antenna may be faulty. Please check the connection to the VHF antenna and that the VHF antenna is not damaged. The red indicator may illuminate briefly if the power supply is interrupted or the VHF antenna characteristics are briefly affected. No GPS position fix can be obtained. Please check the transceiver is located where the internal GPS antenna has a clear sky view or that an external GPS antenna is properly connected and installed. Review the GPS signal strength graph available in proAIS2. The power supply is close to exceeding the allowable limits. Check that the power supply is within the range 9.6V to 31.2V. If none of the above correct the error condition please contact your dealer for advice. Check for error and alarm messages in proAIS2 My MMSI is being received by other vessels but my vessel name is not shown on their chart plotter or PC Some older AIS devices and chart plotters do not process the specific class B AIS message which provides the vessel name (message 24). This is not a fault of your AIS transceiver. Software upgrades are available for many older chart plotters which will correct this issue. The other vessel should update its AIS unit and/or chart plotting software to receive AIS message 24. If the guidance given in the table above does not rectify the problem you are experiencing, please contact your dealer for further assistance. Page 32 Specifications 7 Specifications Parameter Dimensions Weight Power Value 173 x 128 x 53 mm (L x W x H) 365g DC (9.6V - 31.2V) Average power consumption 220mA at 12VDC Peak current rating 2.5A GPS Receiver (AIS Internal) 50 channel IEC 61108-1 compliant Electrical Interfaces USB NMEA0183 38,400kBaud output NMEA0183 4,800kBaud input NMEA2000 LEN=1 VHF antenna connector (SO-239) VHF radio connector (SO-239) External GPS antenna connector (TNC) USB type A plug NMEA2000 standard connector 12 way power input / NMEA0183/External switch Connectors Page 33 VHF Transceiver Transmitter x 1 Receiver x 2 (Receivers time shared between AIS and DSC) Frequency: 156.025 to 162.025 MHz in 25 kHz steps Output Power Channel Bandwidth Channel Step Modulation Modes Bit rate 37dBm 1.5 dB 25kHz 25kHz 25kHz GMSK (AIS, TX and RX) 25kHz AFSK (DSC, RX only) 9600 b/s 50 ppm (GMSK) 1200 b/s 30 ppm (FSK) RX Sensitivity Better than -107dBm at 20% PER Co-channel 10dB Adjacent channel 70dB IMD 65dB Blocking 86dB Environmental Water resistant to IPx7 & IPx6 Indicators Operating temperature: -25C to +55C Tested to IEC 60945 'Exposed' category Power, TX timeout, error, silent mode status Specifications Page 34 Specifications Page 35 If you encounter problems during the installation or operation of this product, or your SI-TEX product requires repair service, please contact Sitex Customer Service. The contact numbers and e-mail address for Sitex Customer Service are:
Customer Service SI-TEX Main Oce...+1-631-996-2690 SI-TEX Fax.....+1-631-996-2693 SI-TEX Service E-mail address: service@si-tex.com SI-TEX Customer Support E-mail address: customerservice@si-tex.com Main Address:
SI-TEX Marine Electronics 25 Enterprise Zone Drive, Ste 2 Riverhead, NY 11901 Technical Support is available from 9:00 AM to 5:00 PM Eastern Standard Time, Monday through Friday. 201-0850:1
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-05-01 | 156.025 ~ 162.025 | AIS - Automatic Identification Systems | Change in identification of presently authorized equipment. Original FCC ID: UYW-428-0002 Grant Date: 04/27/2018 |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2018-05-01
|
||||
1 | Applicant's complete, legal business name |
SI-TEX Marine Electronics
|
||||
1 | FCC Registration Number (FRN) |
0025380973
|
||||
1 | Physical Address |
25 Enterprise Zone Drive, Ste 2
|
||||
1 |
Riverhead, New York 11901
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@tuv-sud.co.uk
|
||||
1 | TCB Scope |
B3: Maritime & Aviation Radio Services equipment in 47 CFR parts 80 & 87
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2ALU7
|
||||
1 | Equipment Product Code |
4280013
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
A******** J******** S********
|
||||
1 | Title |
VICE PRESIDENT
|
||||
1 | Telephone Number |
631-9********
|
||||
1 | Fax Number |
631-9********
|
||||
1 |
a******@si-tex.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/28/2018 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | AIS - Automatic Identification Systems | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Marine Class B AIS Transceiver | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Change in identification of presently authorized equipment. Original FCC ID: UYW-428-0002 Grant Date: 04/27/2018 | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | This device operates on AIS 1 Channel 87 (161.975 MHz) and AIS 2 Channel 88B (162.025 MHz) with remote frequency assignment capability. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
TUV SUD Product Service
|
||||
1 | Name |
M**** J********
|
||||
1 | Telephone Number |
00-44********
|
||||
1 | Fax Number |
00-44********
|
||||
1 |
m******@tuv-sud.co.uk
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 80 | CS | 156.02500000 | 162.02500000 | 5.3460000 | 4.0900000000 ppm | 16K0GXW |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC