FCC ID: 2AOKI-WFM63BUWM1 WF-M63B-UWM1

WIFI Module: WF-M63B-UWM1 CMIIT 1D:2023AP16843 FCC ID: 2AOKI-WFM63BUWM1 FO) B BRA RAR A PRA) SiChuan Al-Link Technology Co., Ltd.

Sichuan AI-Link Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12-28-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AOKI-WFM63BUWM1 Sichuan AI-Link Technology Co., Ltd. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Caixia Hu Rev 1/26/2023 Sichuan AI-Link Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12-28-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AOKI-WFM63BUWM1 Sichuan AI-Link Technology Co., Ltd. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely, Caixia Hu Rev 1/26/2023

Sichuan AI-Link Technology Co., Ltd. Confidentiality Letter Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Confidentiality Request regarding application for certification of FCC ID:

2AOKI-WFM63BUWM1 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Circuit Schematic Operation Description Software Security Information File Name Block Diagram Circuit Schematic Operation Description Software Security Information The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for a period of 180 days:

File Name User Manual External Photos Internal Photos Test Setup Photos Antenna Test Setup Photos Exhibit Type User Manual External Photos Internal Photos Test Setup Photos Antenna Test Setup Photos Clients Signature:

Caixia Hu Date: 2024.01.04 Rev 11/20/07

Sichuan AI-Link Technology Co., Ltd. U-NII-DTS Declaration Letter To whom it may concern :

We have declared below featured for FCC equipment authorization, Device FCC ID: 2AOKI-WFM63BUWM1

(1) DFS Device --

Master

, Client with Radar detection capability , Client without radar detection capability , N/A

(2) Active / Passive Scanning , adhoc mode access point capability Frequency Band

(MHz) 5180-5240 5260-5320 5500-5700 5745-5825 Active Scanning

(the device can transmit a probe

(beacon)) Yes , Yes , Yes , Yes , No No No No Passive scanning

(where the device is can listen only with no probes) Yes , Yes , Yes , Yes , No No No No Ad Hoc Mode or WIFI Direct capability Access point capability Yes , Yes , Yes , Yes , No No No No Yes , Yes , Yes , Yes , No No No No

(3) If yes, pls explain how it was implemented : (pls also help to provide detail of options for each country selection) Country code selection ability -

Yes , No

(4) pls check below :

Meet 15.202 requirement -

Yes , No , A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. For client devices that have software configuration control to operate in different modes (active scanning in

(5) some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply ,

(If apply , pls help to provide explanation on it was implement , and how software was controlled) Clients Signature:

Caixia Hu Date: 2024.1.10

Sichuan AI-Link Technology Co., Ltd. SDoC Attestation Letter To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID: 2AOKI-WFM63BUWM1 Product Description: WIFI Module Type Designation: WF-M63B-UWM1 Trademark: AILINK To Whom It May Concern:

Has been the units used for conducting FCC compliance testing, the SDoC part will be tested by EMTEK (SHENZHEN) CO., LTD. If you have any question or concerns, pls. contact us. Clients Signature:

Caixia Hu Date: 2023.12.28

Sichuan AI-Link Technology Co., Ltd. Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: 2AOKI-WFM63BUWM1 Items to be covered by Single modular transmitters. 1. The modular transmitter must have its own RF shielding. Answer from applicant Yes 2. 3. 4. 5. 6. 7. 8. The modular transmitter must have buffered modulation/data inputs (if such the module will comply with Part 15 inputs are provided) to ensure that requirements under conditions of excessive data rates or over-modulation. The modular transmitter must have its own power supply regulation. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(b)(c). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable). The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number in accordance with 15.212 (a)(1)(vi)(A) / (B). The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment there are very strict operational and timing authorization. For example, requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. Section 15.247 are required to address RF Exposure compliance. Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. In addition, spread spectrum transmitters operating under Yes Yes Yes Yes Yes Yes Yes Note: A limited modular approval (LMA) may be granted for single modular transmitters that comply partially with the requirements above. Name and surname of applicant (or authorized representative): Caixia Hu Signature:

Date: 2024.1.10

Sichuan AI-Link Technology Co., Ltd. POA Letter Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA FCC Application for FCC ID: 2AOKI-WFM63BUWM1 To Whom It May Concern:

We, the undersigned, hereby authorize Lisa Wang at EMTEK (SHENZHEN) CO., LTD. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK (SHENZHEN) CO., LTD. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Clients Signature:

Caixia Hu Date: 2023.12.28

Sichuan AI-Link Technology Co., Ltd. Anzhou, Industrial park, Mianyang, Sichuan, China Date: 2023.12.28 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AOKI-WFM63BUWM1 FRN: 0027073196 US Agent Attestation Statement / Part 2.911(d)(7) Sichuan AI-Link Technology Co., Ltd. certifies, that as of 2023.12.28, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2AOKI-WFM63BUWM1. Sichuan AI-Link Technology Co., Ltd., accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of Sichuan AI-

Link Technology Co., Ltd. for FCC ID: 2AOKI-WFM63BUWM1. Designated Agent Information:

Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: Support@FCCUSAgent.com Sincerely, Company:

Sichuan AI-Link Technology Co., Ltd. Designated Agent: FCC US Agent, LLC Company Representative: Caixia Hu Designated Agent Representative: Tim Payne Signature:

Signature: