|
app
s
|
Applicant Information
|
|
|
1 2 3
|
Effective |
2024-04-29
|
|
1 2 3
|
Applicant's complete, legal business name |
Sichuan AI-Link Technology Co.,Ltd.
|
|
1 2 3
|
FCC Registration Number (FRN) |
0027073196
|
|
1 2 3
|
Physical Address |
Anzhou, Industrial park
|
|
1 2 3
|
Mianyang, Sichuan, N/A
|
|
1 2 3
|
China
|
|
|
app
s
|
TCB Information
|
|
1 2 3
|
TCB Application Email Address |
e******@applus.com
|
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3
|
Grantee Code |
2AOKI
|
|
1 2 3
|
Equipment Product Code |
AL7663BWGA
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3
|
Name |
C****** H******
|
|
1 2 3
|
Title |
Engineer
|
|
1 2 3
|
Telephone Number |
+86- ********
|
|
1 2 3
|
Fax Number |
+86- ********
|
|
1 2 3
|
E-mail |
c******@ailinkiot.com
|
|
|
app
s
|
Technical Contact
|
|
1 2 3
|
Firm Name |
Sichuan AI-Link Technology Co.,Ltd.
|
|
1 2 3
|
Name |
D****** Q******
|
|
1 2 3
|
Physical Address |
Sichuan
|
|
1 2 3
|
China
|
|
1 2 3
|
Telephone Number |
15983********
|
|
1 2 3
|
E-mail |
d******@ailinkiot.com
|
|
|
app
s
|
Non Technical Contact
|
|
1 2 3
|
Firm Name |
Sichuan AI-Link Technology Co.,Ltd.
|
|
1 2 3
|
Name |
D******** Q******
|
|
1 2 3
|
Physical Address |
Sichuan
|
|
1 2 3
|
China
|
|
1 2 3
|
Telephone Number |
15983********
|
|
1 2 3
|
E-mail |
d******@ailinkiot.com
|
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/25/2024 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 | Equipment Class | DTS - Digital Transmission System |
| 1 2 3 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WIFI Module |
| 1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 | Purpose / Application is for | Original Equipment |
| 1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 | Grant Comments | Single Modular Approval. Output power listed is maximum conducted power. The device is a 2x2 MIMO as is described in the filing. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The device contains 20MHz and 40MHz signal bandwidth modes. |
| 1 2 3 | Single Modular Approval. Output power listed is maximum combined conducted power. The device is a 2x2 MIMO as is described in the filing. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection.This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The device contains 20MHz, 40MHz and 80MHz signal bandwidth modes. |
| 1 2 3 | CC
Single Modular Approval. Output power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| 1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3
|
Firm Name |
CVC Testing Technology (Shenzhen) Co., Ltd.
|
|
1 2 3
|
Name |
W******** L******
|
|
1 2 3
|
Telephone Number |
0086-********
|
|
1 2 3
|
E-mail |
l******@cvc.org.cn
|
|