AI-LINK WF-M601-UWS3 WiFi Module Features Supported WLAN Standards IEEE Std. 802.11b IEEE Std. 802.11g IEEE Std. 802.11n Chip Solution MTK MT7601UN/B Size 33.0mm*40.0mm*6.0mm Model Overview Module Name Installation Supported Standards Data Rate(max) Band Antenna Interface WF-M601-UWS3 Plugin IEEE 802.11b/g/n 150Mbps 2.4 GHz Integral Note 5V power supply Sichuan AI-Link Technology Co.,Ltd Add: Anzhou,Industrial park,Mianyang,Sichuan Web: http://www.changhong.com Tel: +86-13881190925 WF-M601-UWS3 WiFi Module Feedback of customers Confirmation We accept the specification after Confirmed Customer name Customer signature Confirmation Date Please feed back this paper and first paper after your signature by the address,thanks!
ADD Anzhou,Industrial park,Mianyang,Sichuan Factory Sichuan AI-Link Technology Co.,Ltd. Approved Checked Designed Product WiFi Module Bai Lang Ding Shuang Peng Feng Jie Model WF-M601-UWS3 Date 2018-10-30 Sichuan AI-Link Technology Co., Ltd. page 2 of 16 WF-M601-UWS3 WiFi Module Record of Modification No V1.0 Date of modification 20181030 Main content of modification Initial Release Reason of modification Serial number of modification Confirm Feng Jie Sichuan AI-Link Technology Co., Ltd. page 3 of 16 WF-M601-UWS3 WiFi Module 1. Brief description:
WIFI MODULE WF-M601-UWS3 is based on MTK MT7601UN/B complied with IEEE 802.11b/g/n standard from 2.4GHz-2.5GHz.Supported for 150Mbps high speed wireless network connection. 2. Block diagram:(N/A) 3. Package outline and Mounting:(units:mm) Top View Bottom View NOTE:General tolerance 0.2mm unless otherwise stated Sichuan AI-Link Technology Co., Ltd. page 4 of 16 4. Pin Definition:
Pin 1 2 3 4 5 6 WF-M601-UWS3 WiFi Module Description Symbol VCC-5V
+5V DC Power Supply Input USB Data DM USB Data DP Connected to Ground UDM UDP GND WLAN_DE V_WAKE Wake Up RST Reset the WLAN 5. Product Pictures Pin Definition TOP VIEW BOTTOM VIEW Silk Introduction:
1.The characters is the version of PCB in the red box;
2.The characters is PCB flame retardant in the green box;
3.The characters is the manufacture date of PCB in the yellow box;
Sichuan AI-Link Technology Co., Ltd. page 5 of 16 6. Key Materials Item Category MPN 1 2 3 IC PCB Crystal Oscillator MT7601UN/B Description 40-QFN JUI7.820.0409-1 FR-4,2LAY E3SB40E00001BE 40M WF-M601-UWS3 WiFi Module Note MFR MTK Sunlord IQPCB SHPCB JWT Hosonic ACX 7. General Requirements:
No. 7-1 7-2 7-3 7-4 7-5 7-6 Feature Operation Voltage Current Consumption Operation Temperature Antenna Type USB Storage Temperature Description 3.3V+/-0.3 210mA @TX HT40 MCS7 15dBm 242mA @TX CCK 11M 19dBm 0C to +60C Integral antenna High Speed USB 2.0 Interface
-40C to +125C Sichuan AI-Link Technology Co., Ltd. page 6 of 16 8. RF Characteristics:
8-1 IEEE 802.11b Section:
Items Specification Mode Channel Data rate TX Characteristics EIRP Power 1. Power Levels(Calibrated) 1) 2. Spectrum Mask @ target power 1) fc +/-11MHz to +/-22MHz 2) fc > +/-22MHz 3 Constellation Error(EVM)@ target power 1) 1Mbps 2) 2Mbps 3) 5.5Mbps 4) 11Mbps 4. Frequency Error RX Characteristics 5 Minimum Input Level Sensitivity(each chain) 1) 1Mbps (FER 8%) 2) 2Mbps (FER 8%) 3) 5.5Mbps (FER 8%) 4) 11Mbps (FER 8%) 6 Maximum Input Level (FER 8%) WF-M601-UWS3 WiFi Module Contents IEEE802.11b CCK CH1 to CH13 1, 2, 5.5, 11Mbps Min. Typ. Max. Unit Remark 15.5 17
-
-
-
-
-
-
-10 Min.
-
-
-
-
-10
-
-
-
-
-
-5 Typ.
-
18.5
-30
-50
-10
-10
-10
-10 10 Max.
-83
-80
-79
-76
-
dBm dBr dBr dB dB dB dB ppm Unit dBm dBm dBm dBm dBm Sichuan AI-Link Technology Co., Ltd. page 7 of 16 8-2 IEEE 802.11g Section:
Items Specification Mode Channel Data rate TX Characteristics EIRP Power 1. Power Levels 1) 2. Spectrum Mask @ target power 1) at fc +/-11MHz 2) at fc +/-20MHz 3) at fc > +/-30MHz 3 Constellation Error(EVM)@ target power 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 4 Frequency Error RX Characteristics 5 Minimum Input Level Sensitivity(each chain) 1) 6Mbps (PER 10%) 2) 9Mbps (PER 10%) 3) 12Mbps (PER 10%) 4) 18Mbps (PER 10%) 5) 24Mbps (PER 10%) 6) 36Mbps (PER 10%) 7) 48Mbps (PER 10%) 8) 54Mbps (PER 10%) 6 Maximum Input Level (PER 10%) WF-M601-UWS3 WiFi Module Contents IEEE802.11g OFDM CH1 to CH13 Min. 6, 9, 12, 18, 24, 36, 48, 54Mbps Typ. Max. Unit Remark 13.5 15 16.5 dBm
-
-
-
-
-
-
-
-
-
-
-
-10 Min.
-
-
-
-
-
-
-
-
-20
-
-
-
-
-
-
-
-
-
-
-5 Typ.
-
-20
-28
-40
-5
-8
-10
-13
-16
-19
-22
-25 10 Max.
-85
-84
-82
-80
-77
-73
-69
-65
-
dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm Sichuan AI-Link Technology Co., Ltd. page 8 of 16 8-3 IEEE 802.11n HT20 Section:
Items Specification Mode Channel Data rate (MCS index) TX Characteristics EIRP Power 2. Power Levels 1) 3. Spectrum Mask @target power 1) at fc +/-11MHz 2) at fc +/-20MHz 3) at fc > +/-30MHz 4. Constellation Error(EVM)@ target power 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 5. Frequency Error RX Characteristics 6. Minimum Input Level Sensitivity(each chain) 1) MCS0 (PER 10%) 2) MCS1 (PER 10%) 3) MCS2 (PER 10%) 4) MCS3 (PER 10%) 5) MCS4 (PER 10%) 6) MCS5 (PER 10%) 7) MCS6 (PER 10%) 8) MCS7 (PER 10%) 7. Maximum Input Level (PER 10%) WF-M601-UWS3 WiFi Module Contents IEEE802.11n HT20 @ 2.4GHz OFDM CH1 to CH13 MCS0/1/2/3/4/5/6/7/8/9/10/11/12/13/14/15 Remark Min. Min. 12.5
-
-
-
-
-
-
-
-
-
-
-
-10 Min.
-
-
-
-
-
-
-
-
-20 Typ. Typ. 14
-
-
-
-
-
-
-
-
-
-
-
Typ.
-
Max. Max. 15.5
-20
-28
-45
-5
-10
-13
-16
-19
-22
-25
-28 10 Max.
-82
-79
-77
-74
-70
-66
-65
-64
-
Unit Unit dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm Sichuan AI-Link Technology Co., Ltd. page 9 of 16 8-4 IEEE 802.11n HT40 Section:
Items Specification Mode Channel Data rate (MCS index) TX Characteristics EIRP Power 1. Power Levels (Calibrated) 1) 2. Spectrum Mask @target power 1) at fc +/-22MHz 2) at fc +/-40MHz 3) at fc > +/-60MHz 3. Constellation Error(EVM)@target power 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity(each chain) 1) MCS0 (PER 10%) 2) MCS1 (PER 10%) 3) MCS2 (PER 10%) 4) MCS3 (PER 10%) 5) MCS4 (PER 10%) 6) MCS5 (PER 10%) 7) MCS6 (PER 10%) 8) MCS7 (PER 10%) 6. Maximum Input Level(PER 10%) WF-M601-UWS3 WiFi Module Contents IEEE802.11n HT40 @ 2.4GHz OFDM CH3 to CH11 MCS0/1/2/3/4/5/6/7/8/9/10/11/12/13/14/15 Remark Min. Min. 12.5
-
-
-
-
-
-
-
-
-
-
-
-10 Min. Typ. Typ. 14
-
-
-
-
-
-
-
-
-
-
-5 Typ.
-
-20
-
Max. Max. 15.5
-20
-28
-45
-5
-10
-13
-16
-19
-22
-25
-28 10 Max.
-79
-76
-74
-71
-67
-63
-62
-61
-
Unit Unit dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm Sichuan AI-Link Technology Co., Ltd. page 10 of 16 WF-M601-UWS3 WiFi Module 9. Software Requirements The driver supports the following operating systems: Linux, Microsoft Windows XP, Vista and Win7. Mfg. software tool version is MT7601 USB QA V1.0.9.0 or later. 10. Refelow Standard Condition 11. Mechanical, Environmental and Reliability Tests Test Items 4-1 Drop test 4-2 Vibration test 4-3 Impact test Test Conditions The packed samples within 100Kg can be tested Drop height:
Face Side: 800/600/450mm Edge line: 600/450/350mm Drop time: 1 each Face and edge. X-Y-Z direction, first Frequency changing from 10Hz to 30Hz to 10Hz
,amplitude 0.75mm, 5 times vibrations, then frequency Changing from 30Hz to 55 Hz to 30 Hz, amplitude 0.15mm, 5 time vibration. Impact acceleration:
50m/sec2;
Impact duration: 16ms Impact times: 1000. Qty 1xBox 3 3 Criteria Condition After drop test, the outer box and inner box will been not visual inspection. appearance broken by test, After the Appearance, Power EVM and Frequency error shall be satisfied with the specification. test, After the Appearance, Power EVM and Frequency error shall be satisfied with the specification. Sichuan AI-Link Technology Co., Ltd. page 11 of 16 4-4 4-5 4-6 4-7 4-8 4-9 Soldering ability test Soldering temperature:
2355 Soldering duration:
20.5S Humidity test Leave samples in 403, 93% RH @ 96 hours High temperature load life test Thermostat cabinet temperature: 555 Applied voltage:
110% rated voltage Working duration: 200 hour
(Supply Voltage Cycle 23h power on, 1h power off) High temperature load test Temperature: 555 Samples work for 16 hours Low temperature storage test Leave the samples in
-253@24 hours Low temperature load test 4-10 Temperature circle test 4-11 Continuous TP test 4-12 ESD Leave samples in
-153@ 2 hours, samples function shall be normal, the let samples work for 1 hour One cycle duration
-103 @3H 403 @3H Total cycle: 10x Twice cycle duration
-103@4H
+603@4H,
+25@2H@2H Discharge voltage: 2kV C: 150pF Discharge resistance330 Positive10 times 1 time for each second WF-M601-UWS3 USB WiFi Module the soldered area must be 1. After soldering, covered by a smooth bright solder layer, some deficiencies such as a small amount of the pinhole, not wetting are allowed, but the deficiencies can not be in the same place 2. At least 90% of soldered area shall be covered continuously by the soldering material. Leave samples in standard test condition for 2 hours then test, the Appearance, Power, EVM and Frequency error functional parameter shall be satisfied with the test specification. 3 3 60 After test, leave samples in standard condition for 1 hour and test, Power, EVM and Frequency error shall be satisfied with the test specification. 3 3 3 3 3 3 After test, the Appearance, Power, EVM and Frequency error shall be Satisfied with the test specification. Leave samples in standard test condition for 2 hours then test, the Appearance, Power, EVM and Frequency error shall be satisfied with the test specification. test, After leave the samples in standard condition and tested the Appearance, Power, EVM and Frequency error shall be satisfied with the test specification. test, leave the samples in standard After condition and tested Power EVM and Frequency error shall be qualified and all the characters shall be satisfied with the test specification. During test, There will not been appeared signal disconnection or interruption between DUT and AP. The products can recoverable smoothly after ESD test. Sichuan AI-Link Technology Co., Ltd. page 12 of 16 12.Package 1Tray Dimensions WF-M601-UWS3 WiFi Module 2the Direction of Product in Tray Notes:
1.Dimensions of the case:472mm*365mm*150mm;
2.30PCS Products per tray,and total 900PCS Products per case;
Sichuan AI-Link Technology Co., Ltd. page 13 of 16 WF-M601-UWS3 WiFi Module FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator
&your body OEM INTEGRATION INSTRUCTIONS:
This device is intended only for OEM integrators under the following conditions:
The module must be installed in the host equipment such that 20 cm is maintained between the antenna and users, and the transmitter module may not be co-located with any other transmitter or antenna. The module shall be only used with the internal on-board antenna that has been originally tested and certified with this module. External antennas are not supported. As long as these 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). The end-product may need Verification testing, Declaration of Conformity testing, a Permissive Class II Change or new Certification. Please involve a FCC certification specialist in order to determine what will be exactly applicable for the end-product. Validity of using the module certification:
In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. In such cases, please involve a FCC certification specialist in order to determine if a Permissive Class II Change or new Certification is required. Sichuan AI-Link Technology Co., Ltd. page 14 of 16 WF-M601-UWS3 WiFi Module Upgrade Firmware:
The software provided for firmware upgrade will not be capable to affect any RF parameters as certified for the FCC for this module, in order to prevent compliance issues. End product labeling:
This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID: 2AOKI-WFM601UWS3. Information that must be placed in the end user manual:
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may IC Statement This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
cause undesired operation of the device. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. 1,This modular complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be collocated or operating in conjunction with antenna or transmitter. If the IC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module IC number: 23460-WFM601UWS3 Or Contains IC number: 23460-WFM601UWS3 when the module is installed inside another device. 2,The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and user. 2) The transmitter module may not be co-located with any other transmitter or antenna. Module Antenna Type: Integral Antenna, ANT Gain: 2dBi 3,This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Le prsent appareil est conforme aux CNR d'Industrie Canada applicable aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement Cet quipement est conforme aux limites d'exposition aux rayonnements ISED dfinies pour un environnement non control. Cet quipement doit tre install et utilis avec un minimum de distance de 20cm entre le radiateur et n'importe quelle partie de votre corps. Sichuan AI-Link Technology Co., Ltd. page 15 of 16 WF-M601-UWS3 WiFi Module CE Statement Herby,Sichuan AI-Link Technology Co., Ltd.declares that this WiFi ModuleWF-M601-
UWS3 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product allowed to be used in all EU member states. Use the WiFi Module in the environment with the temperature between 0 and 60 Operation Frequency: 2412MHz~2472MHz (802.11b/802.11g/802.11n(HT20)) 2422MHz~2462MHz (802.11n(HT40)) Max output power: 0.0515W ManufacturerSichuan AI-Link Technology Co., Ltd. AddressAnzhou, Industrial park, Mianyang, Sichuan, China Tel: +86- 0816-2438701 Fax: +86- 0816-2438701 E-mail: caixia.hu@changhong.com Sichuan AI-Link Technology Co., Ltd. page 1 of 16 6