SIMATIC NET S7-CPs fr Industrial Ethernet Handbuch Teil B7 (Vorabversion 11.2005) Netzbergang IWLAN/PB Link PN IO 6GK1417-5AB00 ab Ausgabestand 1 (Firmware-Stand V 1.0) LED-Anzeigen C-PLUG Spannungsversorgung Anschluss an PROFIBUS:
9-polige Sub-D-Buchse Antenne:
Anschluss an Ind. Wireless Lan Produkthinweise Produkthinweise Produktbezeichnungen In dieser Beschreibung finden Sie Informationen zum Produkt S IWLAN/PB Link PN IO Bestell-Nr.: 6GK1417-5AB00 In Papierform beiliegende Produktinformation Hinweis Smtliche Hinweise in der Produktinformation, die dem hier beschriebenen Gert beiliegt, sind gltig und unbedingt zu beachten. B7-2 Netzbergang IWLAN/PB Link PN IO fr Industrial Ethernet / Handbuch Teil B9 Ausgabe 1/2005 C79000-G8900-C200-01_vorabversion_01 Inhalt Inhalt Inhalt - Teil A S7-CPs - allgemeine Informationen
. siehe allgemeiner Teil Hinweis Beachten Sie bitte den hier genannten Teil A des Handbuches; dieser gehrt ebenfalls zur Beschreibung des CPs / Link. Unter anderem finden Sie dort die Er-
klrung der verwendeten Sicherheitshinweise, die Literaturhinweise sowie weitere Informationen, die fr alle S7-CPs / IE/PB Link fr Industrial Ethernet gelten. Zum vorliegenden Teil B des Handbuches gehrt folgender Ausgabestand des All-
gemeinen Teiles A: ab 12/2004 Sie knnen den aktuellen Allgemeinen Teil A auch ber Internet beziehen:
http://www4.ad.siemens.de/view/cs/de/8777865 Inhalt - Teil B7 1 Aufbau
. 2 Montage und Inbetriebsetzung
. 2.1 2.1.1 2.2 So gehen sie vor Spannungsversorgung
. C-PLUG (Configuration Plug)
. 3 Technische Daten
. B7-4 B7-5 B7-5 B7-9 B7-10 B7-11 Netzbergang IWLAN/PB Link PN IO fr Industrial Ethernet / Handbuch Teil B9 Ausgabe 1/2005 C79000-G8900-C200-01_vorabversion_01 B7-3 1 Aufbau 1 Aufbau LED-Anzeigen Reset-Button C-PLUG Anschluss an PROFIBUS:
9-polige Sub-D-Buchse Antenne:
Anschluss an Ind. Wireless Lan Bild 1-1 Spannungsversorgung Das IWLAN/PB Link PN IO entspricht dem Gehuse des Power Rail Booster. Es wird auf eine 15mm oder 7,5 mm Standard-Normprofilschiene aufgeschnappt. ber einen Anschlussstecker werden entweder eine Antenne fr RCoax oder eine Antenne fr ein IWLAN-Funkfeld angeschlossen. Mit Schutzart IP20 ist das IWLAN/PB Link PN IO fr die Montage im Schaltschrank geeignet. Die Anschlsse und Anzeigeelemente befinden sich ausschlielich auf der Front-
seite; der optional einsetzbare C-PLUG befinden sich unter einer Abdeckung ebenfalls auf der Frontseite. Weitere konstruktive Merkmale:
S lfterloser Betrieb;
S eine R-SMA-Schnittstelle fr den Anschluss von Antennen;
S 9-polige SUB-D-Buchse zum Anschluss des IWLAN/PB Link PN IO an PROFIBUS;
S eine 4-polige Klemmleiste fr den Anschluss einer redundanten externen Ver-
sorgungsspannung von DC 24 V;
S LED-Anzeigen;
Achtung Der Austausch des C-PLUG darf nur im spannungslosen Zustand erfolgen!
B7-4 Netzbergang IWLAN/PB Link PN IO fr Industrial Ethernet / Handbuch Teil B9 Ausgabe 1/2005 C79000-G8900-C200-01_vorabversion_01 2 Montage und Inbetriebsetzung 2 Montage und Inbetriebsetzung 2.1 So gehen sie vor Gehen Sie gem der folgenden Darstellung vor; beachten sie bitte die zustzli-
chen Hinweise in diesem Kapitel. Die Montage und die Projektierung knnen zu-
nchst unabhngig voneinander durchgefhrt werden. Montage:
Projektierung: (siehe auch Kap. 4):
Montieren Sie IWLAN/PB Link PN IO auf einer Hutschiene Schlieen Sie die Stromversor-
gung an. bernehmen Sie die im PRESET-PLUG projektierten Voreinstellungen wie in Kap.2.2 beschrieben. Schlieen Sie das Gert an PROFIBUS und ber die Antenne an WLAN an. Schalten Sie die Stromversor-
gung ein. Installieren Sie auf einem PG/PC die Projektiersoftware STEP 7 Einsatz als PROFINET IO-Device und als Netzbergang siehe Kap.4.2 Konfigurieren Sie das IW-
LAN/PB Link PN IO als IO-Device an einem PN-
IO-System
(Proxy mit angeschlosse-
nem DP-Mastersystem) Einsatz nur als Netzbergang siehe Kap.4.1 Konfigurieren Sie IWLAN/
PB Link PN IO als S7-300 Station mit HW Konfig. Weisen Sie dem IWLAN/
PB Link PN IO einen Ge-
rtenamen zu. Weisen Sie dem IWLAN/
PB Link PN IO eine IP-
Adresse zu. Laden bzw. aktualisieren Sie die Datenbasis (Projektierung) des zugehrigen PROFINET IO-Controllers Laden Sie die Datenbasis (Pro-
jektierung) von STEP 7 aus in das IWLAN/PB Link PN IO. Netzbergang IWLAN/PB Link PN IO fr Industrial Ethernet / Handbuch Teil B9 Ausgabe 1/2005 C79000-G8900-C200-01_vorabversion_01 B7-5 2 Montage und Inbetriebsetzung LED-Anzeigen Reset-Button C-PLUG /
PRESET PLUG Anschluss an PROFIBUS:
9-polige Sub-D-Buchse Antenne:
Anschluss an Ind. Wireless Lan Spannungsversorgung Bild 2-1 Achtung Wichtige Hinweise zu Montage und Betrieb:
S Die Montage muss so erfolgen, da die oberen und unteren Lftungsschlitze der Baugruppe nicht verdeckt werden und eine gute Durchlftung mglich ist. Hinweis Der PROFIBUS-Anschluss kann auch bei eingeschalteter Vesorgungsspannung vorgenommen werden. Hinweis Die Anforderungen nach EN61000-4-5, Surge Prfung auf Spannungsversor-
gungsleitungen, werden nur erfllt bei Einsatz eines Blitzductor VT AD 24V Art. Nr. 918 402 . Hersteller:
DEHN+SHNE GmbH+Co.KG Hans Dehn Str.1 Postfach 1640 D-92306 Neu-
markt B7-6 Netzbergang IWLAN/PB Link PN IO fr Industrial Ethernet / Handbuch Teil B9 Ausgabe 1/2005 C79000-G8900-C200-01_vorabversion_01 2 Montage und Inbetriebsetzung
Warnung Das Produkt IWLAN/PB Link PN IO muss in ein Gehuse oder einen Schalt-
schrank eingebaut werden. Im Geltungsbereich der ATEX 100a (EN 50021) mu dieses Gehuse mindestens IP54 nach EN 60529 entsprechen. WARNUNG DAS GERT DARF NUR DANN AN DIE SPANNUNGSVERSORGUNG ANGE-
SCHLOSSEN ODER VON IHR GETRENNT WERDEN, WENN EINE EXPLO-
SIONSGEFAHR MIT SICHERHEIT AUSGESCHLOSSEN WERDEN KANN. Netzbergang IWLAN/PB Link PN IO fr Industrial Ethernet / Handbuch Teil B9 Ausgabe 1/2005 C79000-G8900-C200-01_vorabversion_01 B7-7 2 Montage und Inbetriebsetzung Erdungs -/Massekonzept Die Erdung erfolgt ber die Hutschiene. PG/PC -Anschlu Sie knnen das PG zur Projektierung wie folgt anschlieen:
S ber Industrial Wireless LAN (empfohlen) Fr eine Projektierung ber Industrial Wireless LAN muss das IWLAN/PB Link PN IO zuvor mit einer IP-Adresse versorgt werden. Beachten Sie hierzu bitte die Anleitung zur erstmaligen Adressierung im Kapitel 4. S ber PROFIBUS Fr eine Projektierung ber PROFIBUS muss das IWLAN/PB Link PN IO zuvor mit der PROFIBUS-Adresse versorgt werden. Beachten Sie hierzu bitte die Anleitung zur Adressierung im Kapitel 4. Baugruppenzubehr Das fr den Anschlu von IWLAN/PB Link PN IO an ein Industrial Wireless LAN und PROFIBUS LAN bentigte Zubehr (Stromversorgung) ist gesondert zu be-
stellen. Ebenfalls separat bestellbar ist das optional einsetzbare C-PLUG. Ausfhrliche Informationen und Bestelldaten finden Sie im Katalog IK PI. B7-8 Netzbergang IWLAN/PB Link PN IO fr Industrial Ethernet / Handbuch Teil B9 Ausgabe 1/2005 C79000-G8900-C200-01_vorabversion_01 2 Montage und Inbetriebsetzung 2.1.1 Spannungsversorgung
Warnung Das Gert IWLAN/PB Link PN IO ist fr den Betrieb mit Sicherheitskleinspannung ausgelegt. Entsprechend drfen an die Versorgungsanschlsse nur Sicherheits-
kleinspannungen (SELV) nach IEC950/EN60950/ VDE0805 angeschlossen wer-
den. Das Netzteil fr die Versorgung des IWLAN/PB Link PN IO muss NEC Class 2 entsprechen (Spannungsbereich 20,4-28,8 V, Strombedarf 300 mA). Das Gert darf nur mit einer Stromversorgungseinheit versorgt werden, die die Anforderungen der Klasse 2 fr Stromversorgungen der National Electrical Code,table 11 (b) erfllt. Bei einem Aufbau mit redundanter Stromversorgung
(zwei getrennte Stromversorgungen) mssen beide Stromversorgungen mit ihrer Leistung insgesamt diese Anforderungen erfllen. Ausnahmen:
S Die Versorgung durch PELV (entsprechend VDE 0100-410) ist ebenfalls zuls-
sig, sofern die erzeugte Nennspannung die Spannungsgrenzen 25 V AC oder 60 V DC nicht berschreitet. S Die Versorgung durch SELV-Stromquelle (entsprechend IEC 60950) oder PELV-Stromquelle (entsprechend VDE 0100-410) ohne begrenzte Leistung ist ebenfalls zulssig, sofern geeignete Brandschutzmanahmen getroffen werden durch:
- Einbau in einen Schrank oder ein geeignetes Gehuse
- Einbau in einen entsprechend ausgestatteten, geschlossenen Betriebsraum Der Anschluss der Spannungsversorgung erfolgt ber einen 4-poligen steckbaren Klemmenblock. Die Spannungsversorgung ist redundant anschliebar. Beide Ein-
gnge sind entkoppelt. Es besteht keine Lastverteilung. Bei redundanter Einspei-
sung versorgt das Netzteil mit der hheren Ausgangsspannung das IWLAN/
PB Link PN IO alleine. Die Spannungsversorgung ist hochohmig mit dem Gehuse verbunden, um einen erdfreien Aufbau zu ermglichen. L1+:
M:
L2+:
M:
+24V DC Masse 24V DC
+24V DC Masse 24V DC Bild 2-2 Spannungsversorgung Netzbergang IWLAN/PB Link PN IO fr Industrial Ethernet / Handbuch Teil B9 Ausgabe 1/2005 C79000-G8900-C200-01_vorabversion_01 B7-9 2 Montage und Inbetriebsetzung 2.2 Inbetriebsetzung mit dem PRESET-PLUG bersicht Der PRESET-PLUG dient dazu, WLAN-Gerten wie APs, ECMs oder IWLAN/
PB-Links auf einfachste Weise eine definierte Voreinstellung zu geben. Der PRESET-PLUG wird zunchst in einem SCALANCEW mit den gewnschten WLAN Parametern konfiguriert und anschlieend fr die Inbetriebnahme in den C-PLUG Steckplatz des Zielgertes gesteckt. Diese Vorgehensweise ist insbesondere bei der Inbetriebnahme vieler gleich para-
metrierter WLAN-Clients von Vorteil, da dann nicht jeder Client manuell parame-
triert werden muss. Achtung Der PRESET-PLUG ist nur fr die Inbetriebnahme vorgesehen. Der WLAN Be-
trieb mit gestecktem PRESET-PLUG ist nicht mglich. PRESET -PLUG konfigurieren Zur Konfiguration eines PRESET-PLUG bentigen Sie ein Gert vom Typ SCALANCE W788. Sie knnen mit der beschriebenen Vorgehensweise sowohl einen PRESET-PLUG neu konfigurieren als auch eine bestehende Konfiguration ndern. Gehen Sie so vor:
Schritt Vorgehen 1. 2. 3. 4. 5. 6. 7. Stecken Sie einen neuen oder bereits konfigurierten PRESET-PLUG in den C-PLUG Steckplatz des ausgeschalteten SCALANCE W. Schalten Sie das Gert ein. ffnen Sie das Web Interface des SCALANCE W. Im Web Interface werden die aktuellen Einstellungen des PRESET-PLUG angezeigt (bei bereits bestehen-
der Konfiguration). Sie knnen nun die Parameter ndern. Stellen Sie alle Parameter so ein, wie Sie fr die Voreinstellung der Zielgerte bentigt werden. Whlen Sie zuerst, ob das Zielgert als AP oder Client arbeiten soll. Wenn Sie alle Parameter eingestellt haben, ffnen Sie das Menu System "
C-PLUG und whlen die Funktion Create PRESET-PLUG. Whlen sie den Gertetyp des Zielgertes aus, fr welchen dieser PRESET-
PLUG gedacht ist. B7-10 Netzbergang IWLAN/PB Link PN IO fr Industrial Ethernet / Handbuch Teil B9 Ausgabe 1/2005 C79000-G8900-C200-01_vorabversion_01 2 Montage und Inbetriebsetzung Schritt 8. 9. Vorgehen Schlieen Sie die Konfiguration mit der Schaltflche Modify ab. Der PRESET-PLUG ist damit erstellt. Schalten Sie das SCALANCE W aus und entnehmen Sie den PRESET-
PLUG. Der so erstellte PRESET-PLUG funktioniert nur bei dem von Ihnen gewhlten Ge-
rtetyp. Zielgert mit PRESET-PLUG In Betrieb nehmen Die Preset Funktion des PRESET-PLUGs funktioniert nur, wenn der PRESET-
PLUG zuvor fr das zu parametrierende Gert erzeugt wurde. Gehen sie so vor:
Schritt Vorgehen 1. 2. 3. 4. 5. Schalten Sie zuerst das Zielgert aus Stecken Sie den PRESET-PLUG in den C-PLUG Steckplatz. Schalten Sie das Zielgert ein. Es blinken verschiedene LEDs als Zeichen dass ein PRESET-PLUG erkannt wurde. Das genaue LED Bild fr die PRESET-PLUG Funktion knnen Sie der LED Beschreibung des Gerts entnehmen. Bettigen Sie den Reset-Taster neben dem C-PLUG Steckplatz. Die Voreinstellungen des PRESET-PLUGs werden jetzt auf das Gert kopiert und dort gespeichert. Ist dies erfolgreich geschehen, ndert sich der Zustand der LEDs von Blinken auf Dauerlicht. Schalten Sie nun das Zielgert aus und entnehmen Sie den PRESET-PLUG. Mit dem nchsten Einschalten luft das Zielgert mit den vom PRESET-PLUG bertragenen Parametern an. Allgemeine Hinweise S IP-Parameter bleiben unverndert Um eine Verdopplung von IP Adressen zu vermeiden, werden die IP Parameter durch anwenden des PRESET-PLUGs nicht verndert sondern bleiben erhal-
ten. S WLAN Interface ist deaktiviert Ist der PRESET-PLUG gesteckt, wird das WLAN Interface des Gerts deakti-
viert. Der WLAN Betrieb mit gestecktem PRESET-PLUG ist nicht mglich. Netzbergang IWLAN/PB Link PN IO fr Industrial Ethernet / Handbuch Teil B9 Ausgabe 1/2005 C79000-G8900-C200-01_vorabversion_01 B7-11 2 Montage und Inbetriebsetzung 2.3 C-PLUG (Configuration Plug) Wechselmedium C-Plug als Alternative zum Flash-Speicher Das IWLAN/PB Link PN IO besitzt zur Aufnahme der Projektierdaten einen inter-
nen Flash-Speicher. Optional kann das Gert mit einem C-PLUG Wechselme-
dium (Configuration Plug) betrieben werden. Das IWLAN/PB Link PN IO kann mit oder ohne C-PLUG betrieben werden. Der vorhandene Flash-Speicher wird nur dann genutzt, wenn kein C-PLUG gesteckt ist. Wenn ein C-PLUG gesteckt ist, werden die Projektierdaten immer auf diesem ge-
speichert. Dadurch wird der Ersatzteilfall vereinfacht. Durch einfachen C-PLUG Austausch knnen alle Daten ohne Programmiergert in ein Ersatzgert bernom-
men werden. Achtung S Wenn ein C-PLUG gesteckt ist, der keine fr das IWLAN/PB Link PN IO gl-
tige Formatierung oder keine gltigen Daten besitzt, luft das IWLAN/
PB Link PN IO nicht an! Gertezustand: STOP mit Fehler. Sie mssen in diesem Fall den C-PLUG neu formatieren (mittels NCM-
Diagnose) oder durch ein C-PLUG mit gltigen Daten ersetzen. S Der C-PLUG darf nur im spannungslosen Zustand gesteckt oder entnommen werden !
Bild 2-3 C-PLUG in das IWLAN/PB Link PN IO einsetzen und C-PLUG mit Hilfe eines Schraubendre-
hers aus dem IWLAN/PB Link PN IO entnehmen B7-12 Netzbergang IWLAN/PB Link PN IO fr Industrial Ethernet / Handbuch Teil B9 Ausgabe 1/2005 C79000-G8900-C200-01_vorabversion_01 2 Montage und Inbetriebsetzung Tabelle 2-1 Betriebsverhalten beim C-PLUG Einbau Vorgang / Status Verhalten bei Datenbernahme Ergebnis nach Anlauf Auslieferungszustand (nach Konfiguration mit PRESET-PLUG) - Betrieb ohne C-PLUG S Flash-Speicher leer S kein C-PLUG gesteckt. Das IE/PB Link PN IO luft mit den auf den Flash-Speicher bertrage-
nen Projektierdaten. 1) Projektierdaten werden aus dem STEP 7-Projekt bernommen. Hier-
bei ist zu unterscheiden:
S Einsatz nur als Netzbergang:
Projektierdaten werden ber die Ladefunktion von STEP 7 ber-
tragen. S Einsatz als PROFINET IO-De-
vice: Projektierdaten werden vom PROFINET IO-Controller bertragen. Baugruppe wird im Auslieferungszustand (nach Konfiguration mit PRESET-PLUG) mit C-PLUG be-
stckt S Flash-Speicher leer S Leeres C-PLUG wird Das IE/PB Link PN IO luft mit den auf den C-PLUG bertragenen Pro-
jektierdaten. 1) Projektierdaten werden aus dem STEP 7-Projekt bernommen. Hier-
bei ist zu unterscheiden:
S Einsatz als PROFINET IO-De-
vice: Projektierdaten werden vom PROFINET IO-Controller bertragen. S Einsatz nur als Netzbergang:
Projektierdaten werden ber die Ladefunktion von STEP 7 ber-
tragen. Ergebnis nach Anlauf:
Das IE/PB Link PN IO luft mit den auf dem C-PLUG gespeicherten Projektierdaten. Das IE/PB Link PN IO luft mit den auf dem C-PLUG vorhandenen Projektierdaten. 1) gesteckt. S Flash-Speicher leer S C-PLUG mit Projektier-
daten wird gesteckt. Voraussetzung: Projek-
tierdaten mssen fr das IE/PB Link PN IO gltig sein 2) Netzbergang IWLAN/PB Link PN IO fr Industrial Ethernet / Handbuch Teil B9 Ausgabe 1/2005 C79000-G8900-C200-01_vorabversion_01 B7-13 2 Montage und Inbetriebsetzung Tabelle 2-1 Betriebsverhalten beim C-PLUG Einbau, Fortsetzung Vorgang / Status Verhalten bei Datenbernahme Ergebnis nach Anlauf Baugruppe wird im Betriebszustand mit C-PLUG bestckt S Flash-Speicher mit Pro-
jektierung S Leeres C-PLUG wird gesteckt. Beim Anlauf des IE/PB Link PN IO werden die Projektierdaten vom Flash-Speicher auf den C-PLUG geladen Die Projektierdaten im Flash-Spei-
cher werden gelscht. S Flash-Speicher mit Pro-
jektierung S C-PLUG mit Projektier-
daten wird gesteckt Voraussetzung: Projek-
tierdaten mssen fr das IE/PB Link PN IO gltig sein 2) sein 2) Sofern der C-PLUG fr das IE/PB Link PN IO gltige Projektierdaten enthlt, werden diese Projektierda-
ten verwendet; die Daten im Flash-
Speicher werden ignoriert. Beim nchsten Anlauf wird der in-
terne Flash-Speicher gelscht. Das IE/PB Link PN IO luft mit den vom Flash-Speicher auf das C-
PLUG bernommenen Projektierda-
ten. 1) Ergebnis:
Das IE/PB Link PN IO luft mit den auf dem C-PLUG gespeicherten Projektierdaten. 1) 1) Anmerkung zum Einsatz als PROFINET IO-Device: nur der Gertename wird remanent im C-PLUG gespeichert; Projektierdaten werden bei jedem neuen Hochlauf vom PROFINET IO-Controller bertragen und im temporren Speicher abgelegt. 2) Hinweis: Sofern der C-PLUG fr das IE/PB Link PN IO keine gltigen Projektierdaten enthlt, luft das Gert nicht an! Bitte verwenden sie in diesem Fall NCM-Diagnose zur weiteren Klrung und ggf. zur For-
matierung des C-PLUG. B7-14 Netzbergang IWLAN/PB Link PN IO fr Industrial Ethernet / Handbuch Teil B9 Ausgabe 1/2005 C79000-G8900-C200-01_vorabversion_01 3 Technische Daten 3 Technische Daten Datenbertragung / Untersttzte ber-
tragungsgeschwindigkeiten S bertragungsrate Funk S Untersttzte Standards Funk S PROFIBUS Maximale Stromaufnahme an der PRO-
FIBUS-Schnittstelle beim Anschluss von Netzkomponenten (beispielsweise opti-
sche Netzkomponenten) Schnittstellen Industrial Wireless LAN Anschluss an PROFIBUS Versorgungsspannung 1..54 Mbit/s 802.11a, 802.11b, 802.11g 9,6 kbit/s, 19,2 kbit/s, 45,45 kbit/s, 93,75 kbit/s 187,5 kbit/s, 500 kbit/s, 1,5 Mbit/s, 3 Mbit/s 6 Mbit/s, 12 Mbit/s 100 mA bei 5V R-SMA-Antennenbuchsen 9-polige Sub-D-Buchse 2 Einspeisungen fr DC +20,4 V bis 28,8 V Die Versorgungsspannung ist galvanisch getrennt; es besteht hochohmige Verbindung (>700k) mit der Kontaktfeder zur Montage des Gehuses auf der Hutschiene). Stromaufnahme S aus DC 24 V extern Verlustleistung Zul. Umgebungsbedingungen S Betriebstemperatur S Transport-/Lagertemperatur S Relative Feuchte max. S Betriebshhe Konstruktiver Aufbau Baugruppenformat:
S Mae (B x H x T) in mm S Gewicht etwa ca. 0,3 A (typisch bei 24 V) 6,5 W 0 C bis +60 C
-40 C bis +70 C 95% bei +25 C bis 2000 m ber NN Kompaktbaugruppe 90 x 132 x 75 300 g Darberhinaus gelten fr das IWLAN/PB Link PN IO smtliche in /1/ S7-300 Bau-
gruppendaten: Referenzhandbuch im Kapitel Allgemeine technische Daten aufge-
listeten Angaben zu S Elektromagnetischer Vertrglichkeit;
S Transport- und Lagerbedingungen;
S Mechanischen und klimatischen Umgebungsbedingungen;
S Isolationsprfungen, Schutzklasse und Schutzgrad. Ausnahme: Die Abmessungen der Baugruppe und die Montage entsprechen nicht den Angaben zu SIMATIC S7-300. Netzbergang IWLAN/PB Link PN IO fr Industrial Ethernet / Handbuch Teil B9 Ausgabe 1/2005 C79000-G8900-C200-01_vorabversion_01 B7-15 SIMATIC NET S7-CPs for Industrial Ethernet Manual Part B7 (Preliminary Version 11.2005) IWLAN/PB Link PN IO Gateway 6GK1417-5AB00 as of version 1 (firmware version V 1.0) LED displays C-PLUG Power supply Attachment to PROFIBUS:
9-pin D-sub female connector Antenna:
Attachment to Ind. Wireless LAN Notes on the Product Notes on the Product Product Names:
This description contains information on the product S IWLAN/PB Link PN IO order no.: 6GK1417-5AB00 Product Information Accompanying the Product Note All the notices in the Product Information Bulletin shipped with this device are valid and must be adhered to. 2 IWLAN/PB Link PN IO Gateway for Industrial Ethernet / Manual Part B9 Release 1/2005 C79000-G8976-C200-01_vorabversion_01 Contents Contents Contents - Part A S7-CPs - General information
. see general part Note Please remember that Part A of the manual also belongs to the description of the CP / Link. Among other things, it contains explanations of the safety notices, the references, and general information that applies to all S7 CPs / IE/PB Link for Industrial Ethernet. The general Part A: as of 12/2004 belongs to this Part B You can download the current general Part A from the Internet:
http://www4.ad.siemens.de/view/cs/en/8777865 Contents - Part B 1 Construction
. 2 Installation and Commissioning
. 2.1 2.1.1 2.2 How to... Power Supply
. C-PLUG (Configuration Plug)
. 3 FCC Approval
. 3 Technical Specifications
. IWLAN/PB Link PN IO Gateway for Industrial Ethernet / Manual Part B9 Release 1/2005 C79000-G8976-C200-01_vorabversion_01 4 5 5 9 10 11 12 3 1 Construction 1 Construction LED displays Reset button C-PLUG Figure 1-1 Power supply Attachment to PROFIBUS:
9-pin D-sub female connector Antenna:
Attachment to Ind. Wireless LAN The housing of the IWLAN/PB Link PN IO corresponds to that of the Power Rail Booster. It is clipped onto a 15 mm or 7.5 mm standard mounting rail. Either an antenna for RCoax or an antenna for an IWLAN wireless link is attached over a connector. With degree of protection IP20, the IWLAN/PB Link PN IO is suitable for installation in a cabinet. The connectors and display elements are located exclusively on the front panel, the optional C-PLUG is located behind a cover also on the front panel. Other design features:
S No fan necessary S R-SMA interface for connecting antennas;
S 9-pin D-sub female connector for attaching the IWLAN/PB Link PNIO to PROFIBUS S 4-pin terminal block for connecting a redundant external DC 24 V power supply;
S LED displays Notice If you replace the C-PLUG, make sure that the power supply is off!
4 IWLAN/PB Link PN IO Gateway for Industrial Ethernet / Manual Part B9 Release 1/2005 C79000-G8976-C200-01_vorabversion_01 2 Installation and Commissioning 2 Installation and Commissioning 2.1 How to... Follow the steps as shown in the graphic below; please make sure you read the supplementary notes in this section. Installation and configuration can initially be considered as independent procedures. Installation:
Configuration: (see also Chapter 4):
Install the IWLAN/PB Link PN IO on a standard mounting rail Connect to the power supply. Connect the device to PROFIBUS and to the WLAN over the antenna. Insert the PRESET PLUG. Switch the power supply on. Install the SIMATIC STEP 7 configuration software on a PG/PC. Use as a PROFINET IO device and as gateway See Section 4.2 Configure the IWLAN/PB Link PN IO as an IO device in a PN IO system
(proxy with attached DP master system) Use as a gateway only See Section 4.1 Configure the IWLAN/PB Link PN IO as an S7-300 station with HW Config. Assign a device name to the IWLAN/PB Link PN IO. Download or update the database (configuration) of the corresponding PROFINET IO controller Assign an IP address to the IWLAN/PB Link PN IO. Download the database
(configuration) from STEP 7 to the IWLAN/PB Link PN IO. IWLAN/PB Link PN IO Gateway for Industrial Ethernet / Manual Part B9 Release 1/2005 C79000-G8976-C200-01_vorabversion_01 5 2 Installation and Commissioning LED displays Reset button C-PLUG Power supply Figure 2-1 Notice Attachment to PROFIBUS:
9-pin D-sub female connector Antenna:
Attachment to Ind. Wireless LAN Important notes on installation and operation:
S The module must be installed so that its upper and lower ventilation slits are not covered, allowing adequate ventilation. Note You can connect to PROFIBUS even with the power switched on. Note The requirements of EN61000-4-5, surge test on power supply lines, are met only when using a Blitzductor VT AD 24V type no. 918 402 . Manufacturer:
DEHN+SHNE GmbH+Co.KG Hans Dehn Str.1 Postfach 1640 D-92306 Neumarkt, Germany 6 IWLAN/PB Link PN IO Gateway for Industrial Ethernet / Manual Part B9 Release 1/2005 C79000-G8976-C200-01_vorabversion_01 2 Installation and Commissioning
Warning The IWLAN/PB Link PN IO product must be installed in an enclosure or switchgear cabinet. Where ATEX 100a (EN 50021) applies, this enclosure must meet at least IP54 in compliance with EN 60529. WARNING THE DEVICE MAY ONLY BE CONNECTED TO THE POWER SUPPLY OR DISCONNECTED FROM IT WHEN THE RISK OF EXPLOSION CAN BE EXCLUDED WITH CERTAINTY. IWLAN/PB Link PN IO Gateway for Industrial Ethernet / Manual Part B9 Release 1/2005 C79000-G8976-C200-01_vorabversion_01 7 2 Installation and Commissioning Ground/Chassis Ground Concept The device is grounded over the mounting rail. PG/PC Connection You can connect the PG when configuring the CP as follows:
S over Industrial Wireless LAN (recommended) You can only configure the IWLAN/PB Link PN IO over wireless LAN after it has been assigned its IP address. Please follow the instructions for initial addressing in Section 4. S over PROFIBUS You can only configure the IWLAN/PB Link PN IO over PROFIBUS after it has been assigned its PROFIBUS address. Please follow the instructions for addressing in Section 4. Module Accessories The accessories required to connect the IWLAN/PB Link PN IO to a wireless LAN and PROFIBUS LAN (power supply) must be ordered separately. The optional C-PLUG can also be ordered separately. For more detailed information and ordering data, refer to the Catalog IK PI. 8 IWLAN/PB Link PN IO Gateway for Industrial Ethernet / Manual Part B9 Release 1/2005 C79000-G8976-C200-01_vorabversion_01 2 Installation and Commissioning 2.1.1 Power Supply
Warning The IWLAN/PB Link PN IO is designed for operation with safety extra-low voltage
(SELV). This means that only safety extra-low voltages (SELV) complying with IEC950/EN60950/ VDE0805 may be connected to the power supply terminals. The power supply unit to supply the IWLAN/PB Link PN IO must comply with NEC Class 2 (voltage range 20.4 - 28.8 V, current requirement 300 mA). The device must only be supplied by a power supply unit that complies with the requirements of class 2 for power supply units National Electrical Code, Table 11
(b). If the power supply is installed redundantly (two separate power supplies), the total power of both power supplies together must meet these requirements. Exceptions:
S Supply with PELV (complying with VDE 0100-410) is also permitted as long as the generated rated voltage does not exceed the voltage limits 25 V AC or 60 V DC. S Supply by a SELV power source (complying with IEC 60950) or PELV power source (complying with VDE 0100-410) without restricted power is also permitted as long as suitable fire prevention measures are taken by:
installing in cabinet or suitable enclosure installing in suitably equipped, closed room The power supply is connected over a 4-pin plug-in terminal block. The power supply can be connected redundantly. The two inputs are isolated. There is no load sharing. When the supply is redundant, the power source with the higher output voltage supplies the IWLAN/PB Link PN IO alone. The power supply is connected to the housing over a high resistance to allow ungrounded installation. L1+:
M:
L2+:
M:
+24 V DC Chassis 24 V DC
+24 V DC Chassis 24 V DC Figure 2-2 Power Supply IWLAN/PB Link PN IO Gateway for Industrial Ethernet / Manual Part B9 Release 1/2005 C79000-G8976-C200-01_vorabversion_01 9 2 Installation and Commissioning 2.2 C-PLUG (Configuration Plug) C-Plug Removable Memory Medium As an Alternative to Flash Memory The IWLAN/PB Link PN IO has an internal flash memory for storage of the project engineering data. As an option, the device can be operated with a C-PLUG
(configuration plug) removable memory medium. The IWLAN/PB Link PN IO can be operated with or without a C-PLUG. The existing flash memory is then only used when no C-PLUG is inserted. If a C-PLUG is inserted, the project engineering data is always stored on it. This simplifies replacement of modules. By simply exchanging the C-PLUG, all the data can be transferred to the replacement module. Notice S If a C-PLUG is inserted, that does not contain valid formatting or no valid data for the IWLAN/PB Link PN IO will not start up! Device status: STOP with error. In this case, you must reformat the C-PLUG (with NCM diagnostics) or replace it with a C-PLUG containing valid data. S The C-PLUG may only be inserted for removed when the power is turned off!
Figure 2-3 Fitting a C-PLUG in the IWLAN/PB Link PN IO and Removing a C-PLUG from the IE/PB Link PN IO using a Screwdriver 10 IWLAN/PB Link PN IO Gateway for Industrial Ethernet / Manual Part B9 Release 1/2005 C79000-G8976-C200-01_vorabversion_01 3 FCC Approval 3 FCC Approval This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions:
1. 2. this device my not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. Notice Changes or modifications made to this equipment not expressly approved by SIEMENS may void the FCC authorization to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
S Reorient or relocate the receiving antenna. S Increase the separation between the equipment and receiver. S Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Notice FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IWLAN/PB Link PN IO Gateway for Industrial Ethernet / Manual Part B9 Release 1/2005 C79000-G8976-C200-01_vorabversion_01 11 4 Technical Specifications 4 Technical Specifications Data transmission / supported transmission rate S Transmission rate wireless S Supported standards wireless S PROFIBUS Maximum current consumption on the PROFIBUS interface with network components connected (for example, optical network components) Interfaces Industrial wireless LAN Attachment to PROFIBUS Power supply 1 to 54 Mbps 802.11a, 802.11b, 802.11g 9.6 Kbps, 19.2 Kbps, 45.45 Kbps, 93.75 Kbps 187.5 Kbps, 500 Kbps, 1.5 Mbps, 3 Mbps 6 Mbps, 12 Mbps 100 mA at 5V R-SMA antenna sockets 9-pin D-sub female connector 2 inputs for DC +20.4 V to 28.8 V The power supply is electrically isolated; there is a high-resistance connection (>700 k) with contact springs for mounting the housing on the rail). Current consumption S from external 24 V DC Power loss Permitted ambient conditions S Operating temperature S Transportation/storage temperature S Relative humidity max. S Altitude Design Module format:
S Dimensions (W x H x D) in mm S Weight approx. Approx. 0.3 A (typical at 24 V) 6.5 W 0 C to +60 C
-40 C to +70 C 95% at +25 C up to 2000 m above sea level Compact module 90 x 132 x 75 300 g In addition to this, all the information in /1/ S7-300 Module Data: Reference Manual in the section General Technical Specification on the topics listed below applies to the IWLAN/PB Link PN IO S Electromagnetic compatibility S Transportation and storage conditions S Mechanical and climatic ambient conditions S Insulation tests, class of protection and degree of protection Exception: The dimensions of the module and installation do not match the information relating to the SIMATIC S7-300. 12 IWLAN/PB Link PN IO Gateway for Industrial Ethernet / Manual Part B9 Release 1/2005 C79000-G8976-C200-01_vorabversion_01