all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 631.75 KiB | September 09 2004 | |||
1 | Cover Letter(s) | September 09 2004 | ||||||
1 | External Photos | September 09 2004 | ||||||
1 | Internal Photos | September 09 2004 | ||||||
1 | ID Label/Location Info | September 09 2004 | ||||||
1 | Cover Letter(s) | September 09 2004 | ||||||
1 | Test Report | September 09 2004 | ||||||
1 | Test Setup Photos | September 09 2004 |
1 | Users Manual | Users Manual | 631.75 KiB | September 09 2004 |
Read/Write Devices 5 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-1 Read/Write Devices 5.1 Introduction 5.1.1 SLG with RS 232 Serial Interface Application area The SLG with the RS 232 serial interface represents the communication in-
terface between practically any superordinate computer systems/PCs and the mobile data storage unit (MDS). In accordance with customer-specific requirements, the following variants are available:
Design and functions S SLG D10 ANT D5 S SLG D11 ANT D5 S SLG D12 A robust housing and the high degree of protection (IP65) permit deployment in the most severe industrial environments. The SLG is connected via a serial interface (RS 232) of the PC, which per-
mits communication with PCs or external PLCs. Commands and the data to be written or read are converted via a modulator/demodulator circuit. The amount of data that can be transferred between SLG and MDS depends on the following factors. S The speed at which the MDS moves through the SLGs transmission win-
dow (antenna) S The length of the transmission window Use of the C++ library permits the SLG to be programmed quickly using ap-
plications under Windows 9x/2000 and NT 4.0. Table 5-1 Table providing an overview of the SLG with an RS 232 serial interface SLG Type Working di-
stance Sa
(depending on MDS) Limit di-
stance Sa
(depen-
dent on the MDS) Temperature range
(during opera-
tion) SLG dimensions
(L x W x H) in mm Antenna di-
mensions
(L x W x H) in mm Protec-
tion rating SLG D10 ANT D5 0 to 380 mm 450 mm SLG D11 ANT D5 0 to 240 mm 300 mm SLG D12 0 to 120 mm 150 mm 20 to +55 C 20 to +70 C 20 to +70 C 320 x 145 x 100 340 x 325 x 38 160 x 80 x 40 340 x 325 x 38 160 x 80 x 40 IP65 IP65 IP65 Definition of IP65 Protection against penetration of dust (i.e. dust-proof) Full protection against touch Protection against water jet 5-2 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices Configuration SLG MDS
(via RS 232) C library MDWAPI
(The library permits the use of several serial interfaces at the same time) 6GT2 080-2AA10
(MOBY Software) Spacing kit 6GT2 690-0AB00
(accessories) PC RS 232 connecting cable 6GT2 691-0BH50
(6GT2 691-0BN20) MOBY wide-range power pack 6GT2 494-0AA00 SLG D10 ANT D5 6GT2 601-0AA00 SLG D12 6GT2 601-0AB00 24 V connecting cable 6GT2 491-1HH50 Label / Transponder Figure 5-1 SLG MDS configuration via RS 232 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-3 Read/Write Devices Programming of the SLG D 10, SLG D 11, and SLG D 12 Communication at the serial interface between the SLG and the superordinate computer system (host) takes place by means of an asynchronous 8-bit binary protocol. The frames are secured by means of a CRC 16. Can be run on PC models as of the Pentium 2 processor with a serial inter-
face and a Windows 9x/2000/NT 4.0 operating system. The SLG is connected to a serial interface of the computer. Users work with the PC interfaces COM 1 and/or COM 2; 8 interfaces can be run with addi-
tional hardware. A 32-bit library (MDWAPI for Windows 9x/2000 and NT 4.0) and a pro-
gramming guide are available to the user for programming (Software MOBY CD). For computers that do not run under Windows (e.g. UNIX), the commu-
nication specification is described in the programming guide (MDWAPI). Parameter defaults The configuration parameters are described in the programming guide
(MDWAPI). Table 5-2 Ordering data for the MOBY software MOBY Software Order No. 6GT2 080-2AA10 Note on MOBY software and licensing When you purchase an ASM or SLG interface module, this does not include software or documentation. TheSoftware MOBY CD-ROM, which con-
tains all the available FBs/FCs for SIMATIC, C libraries for Windows, demo programs, etc., can be ordered additionally. The CD-ROM also includes the complete set of MOBY documentation (Ger-
man, English, and in some cases French) in PDF format. When you purchase an ASM or SLG interface module, the price for use of the software including documentation on the Software MOBY CD-ROM is included. The pur-
chaser obtains the right to make copies (duplication license) as needed for customer applications or system development for the plant. The enclosed contract also applies to the use of software products for a one-off charge. 5-4 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices 5.1.2 SLG with RS 422 for SIMATIC S7 and PROFIBUS-DPV1 Application area The SLG D1xS provides inductive communication with the mobile data sto-
rage units (MDSs) and the serial link to the interface modules (ASMs). Various SLGs for short, medium, and long distances to the MDS are avai-
lable to meet customer requirements. Design and func-
tions S SLG D10S ANT D5 S SLG D11S ANT D5 S SLG D12S A robust housing and the high degree of protection (IP65) permit deployment in the most severe industrial environments. The SLG executes commands received from the interface module. These commands and the data to be read or written are converted via an appropriate modulator/demodulator circuit. Communication between MDS and the SLG takes place via inductive alter-
nating fields. The amount of data that can be transferred between SLG and MDS depends on the following factors. S The speed at which the MDS moves through the transmission window of the SLGs antenna S The length of the transmission window S The MDS type Table 5-3 Table providing an overview of the SLG with an RS 422 interface SLG Type Working di-
stance Sa
(depending on MDS) Limit di-
stance Sa
(depen-
dent on the MDS) Temperature range
(during opera-
tion) SLG dimensions
(L x W x H) in mm Antenna di-
mensions
(L x W x H) in mm Protec-
tion rating SLG D10S ANT D5 0 to 380 mm 450 mm SLG D11S ANT D5 SLG D12S1 0 to 240 mm 300 mm 0 to 120 mm 150 mm 20 to +55 C 20 to +70 C 20 to +70 C 320 x 145 x 100 340 x 325 x 38 160 x 80 x 40 340 x 325 x 38 160 x 80 x 40 IP65 IP65 IP65 1 Integrated antenna Definition of IP65 Protection against penetration of dust (i.e. dust-proof) Full protection against touch Protection against water jet MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-5 Read/Write Devices 5.1.3 Troubleshooting What should you do if nothing works?
1. Check the supply voltage directly on the SLG connector using a measur-
ing instrument. 2. Check the cabling to the PC Do the SLG and PC have the same physical interface?
Is the polarity of the connecting cable correct (RS 232)?
(RxD of the SLG must be connected to TxD of the PC and vice versa) Is the cable shield applied correctly?
Error messages Error messages are described in the programming guide (MDWAPI). SLG range too low If the SLG range is too low, check:
The power supply unit/switched-mode power supply unit (see Sec-
tion 3.4 on electrical interference) Whether there are monitors or other sources of interference in the vi-
cinity (see Section 3.4) Whether there is metal in the immediate vicinity (see Section 3.3) To attain optimal read/write distances for the ANT D 5, a metal plate is required at a distance of 100 mm (see Table 3-8 and 3-9). 5-6 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices 5.2 SLG D10 ANT D5 Application area The SLG D10 ANT D5 is a high-performance read/write device with a serial interface and a separate antenna, designed specifically for storage, logistics, and distribution applications. It is designed for a range of up to 600 mm (de-
pending on the label). The read/write device has an RS 232 serial interface
(RS 422 interface on request), which permits communication with PCs or external PLCs. For simple and rapid programming there is a C library available to the user that can be used under Windows 9x, 2000, and NT. The SLG D10 ANT D5 is multitag capable. Figure 5-2 Read/write device SLG D10 ANT D5 Ordering data Table 5-4 Ordering data for the SLG D10 ANT D5 Read/write device SLG D10 ANT D5 with an RS 232 serial interface for standard PCs, with a separate antenna Accessories:
Spacer kit for ANT D5 MOBY wide-range power pack Cables and connectors Order No. 6GT2 601-0AA00 6GT2 690-0AB00 6GT2 494-0AA00 See Section 3.6 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-7 Read/Write Devices Technical data Table 5-5 Technical data of the SLG D10 ANT D5 Inductive interface to MDS Transmission frequency Supported transponders Serial interface to user Transmission protocol Data transmission speed Data backup Output power SLG - MDS read/write distances Software functions Programming Multitag Anti-collision speed Power supply Current consumption 13.56 MHz Transponder in accordance with ISO 15693 (e.g. I-Code, Tag-it, my-d) RS 232 (RS 422 on request) Asynchronous 8 bit 9600 bps to 115.2 kbps
(adjustable) CRC 16 4 W Typically 450 mm (see field data)1 MDS: Read, write, initialize, access rights, multitag Windows 9x, 2000, and NT, with available 32-bit DLL Yes Approx. 20 labels/s identifiable in parallel 24 VDC 5%
Operation Transient making current 0.9 A 2.8 A/50 ms Line length, SLG PC With RS 232 With RS 422 Antenna line length Digital inputs/outputs Housing Dimensions (in mm) 30 m 300 m 3.60 m None For antenna [L x W x H]
For electronic components Antenna SLG housing Antenna SLG housing 340 x 325 x 38 320 x 145 x 100 (without connector) Black Anthracite Plastic ASA Aluminum
[L x W x H]
Color Material Connector Antenna (can be connected to the SLG) Mounting of SLG Mounting of antenna Ambient temperature in operation in transit and storage TNC connector 4 M6 screws 4 M5 screws 20 C to +55 C 25 C to +70 C 5-8 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices Table 5-5 Technical data of the SLG D10 ANT D5 Protection rating in accordance with EN 60529 SLG and antenna Shock in accordance with EN 60721-3-7 Class 7M2 Total shock response spectrum type II Vibration in accordance with EN 60721-3-7 Class 7M2 Weight, approx. SLG Antenna Certifications IP65 30 g 1 g (9 to 200 Hz)/
1.5 g (200 to 500 Hz) 3500 g 1000 g Radio EN 300 330 CE Safe for pacemakers 1 To ensure optimal field data in a metallic environment, the ANT D5 is calibrated at the factory at a distance of 100 mm from metal. Caution The antenna cable is prepared in advance. If the cable is changed, the war-
ranty and CE marking become invalid. MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-9 Read/Write Devices Field data Table 5-6 Field data of the SLG D10 ANT D5 Transmission window Limit distance (Sg) Working distance (Sa) Max. 450 mm
(dependent on transponder) 0 to 380 mm
(dependent on transponder) Length of the transmission window (Ld) Width of the transmission window (W) Minimum distance from ANT D5 to ANT D5 320 mm 128 mm 2 m Ld 1 At Sa, min the transmission window increases 1 Sa, min. Sa, max. Transmission window ANT D5 Spacing kit Top view Sg Sg Sa 100 Side view Metal plate Figure 5-3 Transmission window with the SLG D10 ANT D5 5-10 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Metal-free space Metal-free space with flush mounting a = 150 mm Metal a Read/Write Devices a a a FCC information h = 100 mm (non-metallic spacers) Figure 5-4 Metal-free space for the SLG D10 ANT D5 Made in Germany SIEMENS MOBY D SLG D10 FCC ID NXW-MOBYD-SLGD10 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Caution Any changes or modifications not expressly approved by the party responsi-
ble for compliance could void the users authority to operate the equipment. MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-11 Read/Write Devices Definition of the distance D D D Distance D 2 m Figure 5-5 Distance D: SLG D10 ANT D5 5-12 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices Dimensions
(in mm) 10 A Minimal bending radius: 20 mm Cable length 3.5 m Anti-kink protection bendable in all directions 4 x 5.5 1 0 9 2 0 2 3 0 4 3 7 125 145 View A 100 300 325 60 31 7 25 52,5 25 Note:
The SLG must be grounded using the grounding screw provided. 1 Figure 5-6 Dimensioned drawing of the SLG D10 ANT D5 Note In order to ensure optimal field data in surroundings where there is metal as well, the ANT D5 is calibrated at the factory at a distance of 100 mm from metal. MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-13 Read/Write Devices Spacing kit for the MOBY D ANT D5 Table 5-7 Ordering data for the spacing kit MOBY D ANT D5 Spacing kit for the ANT D5 made of aluminum with plastic spacers including fixing screws Individual parts Aluminum plate 380 x 380 x 2 Plastic bolts 100 x 20 Countersunk head screws M5 x 12 Cylinder head screws M5 x 15 Washer for M5 Spring lock washer for M5 Order No. 6GT2 690-0AB00 Quantity 1 4 4 4 4 4 Aluminum plate:
10 R 6 9 0 0 3 0 8 2 0 4 3 0 8 3 T = 2 Plastic bolts:
20 100 M5 x 20 Figure 5-7 Dimensioned drawing for the spacing kit for the MOBY D ANT D5 5-14 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices 4 5 6 2 1 3 Figure 5-8 Mounting diagram for spacer kit Holes for ANT D5 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-15 Read/Write Devices 5.3 SLG D11 ANT D5 Application area The SLG D11 ANT D5 is a medium-performance read/write device with a serial interface and a separate antenna, designed specifically for storage, logi-
stics, and distribution applications. It is designed for a range of up to 300 mm
(depending on the label). The read/write device has an RS 232 serial interface (RS 422 interface on request), which permits communication with PCs or external PLCs. For simple and rapid programming there is a C library available to the user that can be used under Windows 9x, 2000, and NT. The SLG D11 ANT D5 is multitag capable. Figure 5-9 Read/write device SLG D11 ANT D5 Ordering data Table 5-8 Ordering data for the SLG D11 ANT D5 Read/write device SLG D11 ANT D5 with an RS 232 serial interface for standard PCs, with a separate antenna Accessories:
ANT D5 spacer kit MOBY wide-range power pack Cable and connector Order No. 6GT2 601-0AC00 6GT2 690-0AB00 6GT2 494-0AA00 See Section 3.6 5-16 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices Technical data Table 5-9 Technical data of the SLG D11 ANT D5 Inductive interface to MDS Transmission frequency Supported transponders Serial interface to user Transmission protocol Data transmission speed Data backup Output power SLG - MDS read/write distances Software functions Programming Multitag Anti-collision speed Power supply Nominal value Permissible range Current consumption Operation Transient making current Line length, SLG PC With RS 232 Antenna line length Digital inputs/outputs Housing Dimensions (in mm) 13.56 MHz Transponder in accordance with ISO 15693
(e.g. I-Code, Tag-it, my-d) RS 232 (RS 422 on request) Asynchronous 8 bit 9600 bps to 38.4 kbps
(adjustable) CRC 16 1 W Typically 300 mm (see field data)1 MDS: Read, write, initialize, access rights, multitag Windows 9x, 2000, and NT, with available 32-bit DLL Yes Approx. 20 labels/s identifiable in parallel 24 VDC 20 to 30 VDC 150 mA 600 mA 30 m 3.60 m None For antenna [L x W x H]
For electronic components Antenna SLG housing Antenna SLG housing 340 x 325 x 38 160 x 80 x 40 (without connector) Black Anthracite Plastic ASA Plastic (PA 12)
[L x W x H]
Color Material Connector Antenna (can be connected to the SLG) Mounting of SLG Mounting of antenna TNC connector 2 M5 screws 4 M5 screws MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-17 Read/Write Devices Table 5-9 Technical data of the SLG D11 ANT D5 Ambient temperature in operation in transit and storage Protection rating in accordance with EN 60529 SLG and antenna Shock in accordance with EN 60721-3-7 Class 7M2 Total shock reply spectrum type II Vibration in accordance with EN 60721-3-7 Class 7M2 Weight, approx. SLG Antenna Certifications 25 C to +70 C 25 C to +70 C IP65 30 g 1 g (9 to 200 Hz)/
1.5 g (200 to 500 Hz) 600 g 1000 g Radio EN 300 330 CE Safe for pacemakers 1 To ensure optimal field data in a metallic environment, the ANT D5 is calibrated at the factory at a distance of 100 mm from metal. Caution The antenna cable is prepared in advance. If the cable is changed, the war-
ranty and CE marking become invalid. 5-18 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices Field data Table 5-10 Field data of the SLG D11 ANT D5 Transmission window Limit distance (Sg) Working distance (Sa) Max. 300 mm
(dependent on transponder) 0 to 240 mm
(dependent on transponder) Length of the transmission window (Ld) Width of the transmission window (W) Minimum distance from ANT D5 to ANT D5 300 mm 120 mm 2 m Ld 1 At Sa, min the transmission window increases 1 Sa, min. Sa, max. Transmission window ANT D5 Spacing kit Top view Sg Sg Sa 100 Side view Metal plate Figure 5-10 Transmission window with the SLG D11 ANT D5 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-19 Read/Write Devices Metal-free space Metal-free space with flush mounting a = 150 mm Metal a a a a FCC information h = 100 mm (non-metallic spacers) Figure 5-11 Metal-free space for the SLG D11 ANT D5 Made in Germany SIEMENS MOBY D SLG D11 FCC ID NXW-MOBYD-SLGD11 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Caution Any changes or modifications not expressly approved by the party responsi-
ble for compliance could void the users authority to operate the equipment. 5-20 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices Definition of the distance D D D Distance D 2 m Figure 5-12 Distance D: SLG D11 ANT D5 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-21 Read/Write Devices Dimensions
(in mm) 5 0 6 1 0 4 6 2 100 Ferrite Cable length 3.5 m Minimal bending radius: 20 mm 4 x 5,5 Anti-kink protection bendable in all directions 5.5 5 A 12 33 80 View A 0 4 3 300 325 1 3 7 Figure 5-13 Dimensioned drawing of the SLG D11 ANT D5 Note In order to ensure optimal field data in surroundings where there is metal as well, the ANT D5 is calibrated at the factory at a distance of 100 mm from metal. MOBY D ANT D5 spacer kit see Chapter 5.2 5-22 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices 5.4 SLG D12 Application area The SLG D12 is a medium-performance read/write device with a serial inter-
face and an integrated antenna, designed for a range of up to 150 mm. The read/write device has an RS 232 serial interface (RS 422 interface on re-
quest), which permits communication with PCs or external PLCs. For simple and rapid programming there is a C library available to the user that can be used under Windows 9x, 2000, and NT. The SLG D12 is multitag capable. Figure 5-14 Read/write device SLG D12 Ordering data Table 5-11 Ordering data for the SLG D12 Read/write device SLG D12 With an RS 232 serial interface for standard PCs, with an integrated antenna Accessories:
MOBY wide-range power pack Cables and connectors Order No. 6GT2 601-0AB00 6GT2 494-0AA00 See Section 3.6 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-23 Read/Write Devices Technical data Table 5-12 Technical data of the SLG D12 Inductive interface to MDS Transmission frequency Supported transponders Serial interface to user Transmission protocol Data transmission speed Data backup 13.56 MHz Transponder in accordance with ISO 15693
(e.g. I-Code, Tag-it, my-d) RS 232 (RS 422 on request) Asynchronous 8 bit 9600 bps to 38.4 kbps
(adjustable) CRC 16 SLG - MDS read/write distances Typically 150 mm (see field data) Software functions Programming Multitag Anti-collision speed Power supply Nominal value Permissible range Current consumption Operation Transient making current Line length, SLG PC With RS 232 Digital inputs/outputs Housing Dimensions (L x B x H) in mm, without connector Color Material Mounting Ambient temperature in operation in transit and storage Protection rating in accordance with EN 60529 Shock in accordance with EN 60721-3-7 Class 7 M2 Total shock reply spectrum type II Vibration in accordance with EN 60721-3-7 Class 7M2 MDS: Read, write, initialize, access rights, multitag Windows 9x, 2000, and NT, with avai-
lable 32-bit DLL Yes Approx. 20 labels/s identifiable in pa-
rallel 24 VDC 20 to 30 VDC 150 mA 600 mA 30 m None 160 x 80 x 40 Anthracite Plastic (PA 12) 2 M5 screws 25 C to +70 C 25 C to +70 C IP65 30 g 1 g (9 to 200 Hz)/
1.5 g (200 to 500 Hz) 5-24 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices Table 5-12 Technical data of the SLG D12 Weight, approx. Certifications 500 g Radio EN 300 330 CE Safe for pacemakers Field data Table 5-13 Field data SLG D12 Limit distance (Sg) Working distance (Sa) Length of the transmission window (Ld) Width of the transmission window (W) Minimum distance from SLG D12 to SLG D12 Max. 150 mm
(dependent on transponder) 0 to 120 mm
(dependent on transponder) 120 mm 48 mm 500 mm Transmission window Transmission window Transponder Side view SLG D12 Standard Configuration:
lengthwise x-axis (Lx) Top view 1 1 At Sa, min the transmission window can be enlarged in comparison to the standard configuration Figure 5-15 Transmission window of the SLG D12 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-25 Read/Write Devices Metal-free space Metal h h = Physical height of the SLG = 40 mm b b a a FCC information Metal a, b = Metal-free distances = 50 mm Figure 5-16 Metal-free space of SLG D12 Made in Germany SIEMENS MOBY D SLG D12 FCC ID NXW-MOBYD-SLGD12 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Caution Any changes or modifications not expressly approved by the party responsi-
ble for compliance could void the users authority to operate the equipment. 5-26 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices Definition of distance D D D Distance D 0.5 m Figure 5-17 Distance D: SLG D12 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-27 Read/Write Devices Dimensions
(in mm) 5 40 80 X Y A 70 90 160 5.5 5 View A 26 12 33 Figure 5-18 Dimensioned drawing of the SLG D12 5-28 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices 5.5 SLG D10S ANT D5 Application area The SLG D10S ANT D5 is a high-performance read/write device with a se-
rial interface and a separate antenna, designed specifically for storage, logi-
stics, and distribution applications. It is designed for a range of up to 600 mm
(depending on the label). The read/write device has an RS 422 serial inter-
face, which permits communication via interface modules (ASM 452, ASM 473 und ASM 475) to the SIMATIC S7 or PROFIBUS-DPV1. FC 45 is available to the user for simple and rapid programming. Due to the high degree of protection (IP65) and the use of high-quality mate-
rials, the SLG D10S ANT D5 ensures trouble-free use even under the most extreme industrial conditions. Figure 5-19 Read/write device SLG D10S ANT D5 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-29 Read/Write Devices Ordering data Table 5-14 Ordering data for the SLG D10S ANT D5 Read/write device SLG D10S ANT D5 With an RS 422 serial interface for connecting to an ASM 452, ASM 473, and ASM 475, with separate antenna Accessories:
ANT D5 spacer kit MOBY wide-range power pack Cables and connectors Order No. 6GT2 602-0AA00 6GT2 690-0AB00 6GT2 494-0AA00 See Section 3.6 Technical data Table 5-15 Technical data of the SLG D10S ANT D5 Inductive interface to MDS Transmission frequency Supported transponders Serial interface to user Transmission protocol Data transmission speed Data backup Output power SLG-MDS read/write distances Software functions 13.56 MHz I-Code1
(e. g. MDS D139, MDS D160) S S Transponder in accordance with ISO 15693
(e. g. I-Code SLI, Tag-it HFI, my-d SRF 55V10P) RS 422 Asynchronous 8 bit 19.2 bps to 115.2 kbps
(ASM-dependent) CRC 16 4 W Typically 450 mm (see field data)1 Read, write, initialize MDS The command Repeat is not permissible. The user has a maximum buffer of 256 bytes in the SLG for pipelining. Hence, a command string can only con-
tain as many individual commands as such that the sum of the header and user data fields lengths of the individual mes-
sages does not exceed this value. The FC 45 limits the length of the user data fields to 233 bytes per individual mes-
sage. Programming Transmission protocol Multitag Power supply FC 45 3964 R in preparation 24 VDC + 5%
5-30 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices Table 5-15 Technical data of the SLG D10S ANT D5 Current consumption Operation Transient making current Line length (SLG SIMATIC S7) With RS 422 Antenna line length Digital inputs/outputs Housing Dimensions (in mm) 0.9 A 2.8 A/50 ms 300 m 3.60 m None For antenna [L x W x H]
For electronic components
[L x W x H]
340 x 325 x 38 320 x 145 x 100 (without connector) Color Material Connector Antenna SLG housing Antenna SLG housing Black Anthracite Plastic ASA Aluminum Antenna (can be connected to the SLG) Mounting of SLG Mounting of antenna Ambient temperature in operation in transit and storage Protection rating in accordance with EN 60529 SLG and antenna Shock in accordance with EN 60721-3-7 Class 7M2 Total shock response spectrum type II Vibration in accordance with EN 60721-3-7 Class 7M2 Weight, approx. SLG Antenna Certifications TNC connector 4 M6 screws 4 M5 screws 20 C to +55 C 25 C to +70 C IP65 30 g 1 g (9 to 200 Hz)/
1.5 g (200 to 500 Hz) 3500 g 1000 g Radio EN 300 330 CE Safe for pacemakers 1 To ensure optimal field data in a metallic environment, the ANT D5 is calibrated at the factory at a distance of 100 mm from metal. MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-31 Read/Write Devices Caution The antenna cable is prepared in advance. If the cable is changed, the war-
ranty and CE marking become invalid. Note After the ANT D5 antenna is removed from the SLG and connected again
(screwed on), an init_run must be executed. 5-32 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices Field data Table 5-16 Field data of the SLG D10S ANT D5 Transmission window Limit distance (Sg) Working distance (Sa) Max. 450 mm
(dependent on transponder) 0 to 380 mm
(dependent on transponder) Length of the transmission window (Ld) Width of the transmission window (W) Minimum distance from ANT D5 to ANT D5 320 mm 128 mm 2 m Ld 1 At Sa, min the transmission window increases 1 Sa, min. Sa, max. Transmission window ANT D5 Spacing kit Top view Sg Sg Sa 100 Side view Metal plate Figure 5-20 Transmission window with the SLG D10S ANT D5 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-33 Read/Write Devices Metal-free space Metal-free space with flush mounting a = 150 mm Metal a a a a FCC information h = 100 mm (non-metallic spacers) Figure 5-21 Metal-free space for the SLG D10S ANT D5 Made in Germany SIEMENS MOBY D SLG D10S FCC ID NXW-MOBYD-SLGD10 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Caution Any changes or modifications not expressly approved by the party responsi-
ble for compliance could void the users authority to operate the equipment. 5-34 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices Definition of the distance D D D Distance D 2 m Figure 5-22 Distance D: SLG D10S ANT D5 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-35 Read/Write Devices Dimensions
(in mm) 10 Cable length 3.5 m A Minimal bending radius: 20 mm 4 x 5.5 Anti-kink protection bendable in all directions 1 0 2 3 0 9 2 7 125 145 View A 100 60 31 7 25 52,5 25 0 4 3 300 325 Note:
The SLG must be grounded using the grounding screw provided. 1 Figure 5-23 Dimensioned drawing of the SLG D10S ANT D5 Note In order to ensure optimal field data in surroundings where there is metal as well, the ANT D5 is calibrated at the factory at a distance of 100 mm from metal. MOBY D ANT D5 spacer kit see Chapter 5.2 5-36 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices 5.6 SLG D11S ANT D5 Application area The SLG D11 ANT D5 is a medium-performance read/write device with a serial interface and a separate antenna, designed specifically for storage, logi-
stics, and distribution applications. It is designed for a range of up to 300 mm
(depending on the label). The read/write device has an RS 422, serial interface, which permits commu-
nication via interface modules (ASM 452, ASM 473 und ASM 475) to the SIMATIC S7 or PROFIBUS-DPV1. FC 45 is available to the user for simple and rapid programming. A robust housing and the high degree of protection (IP65) permit deployment in the most severe industrial environments. Figure 5-24 Read/write device SLG D11S ANT D5 Ordering information Table 5-17 SLG D11S ANT D5 ordering information Read/write device SLG D11S ANT D5 With an RS 422 serial interface for connecting to an ASM 452, ASM 473 and ASM 475, with separate antenna Accessories:
Spacer kit for ANT D5 MOBY DC 24 V wide-range power pack Cables and connectors Order No. 6GT2 602-0AC00 6GT2 690-0AB00 6GT2 494-0AA00 See Section 3.6 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-37 Read/Write Devices Technical data Table 5-18 SLG D11S ANT D5 technical data Inductive interface to MDS Transmission frequency Supported transponders Serial interface to user Transmission protocol Data transmission speed Data backup Output power SLG MDS read/write distances Software functions Programming Transmission protocol Multitag Power supply Operation Permissible range Current consumption Operation Transient making current Line length (SLG SIMATIC S 7) With RS 422 Antenna line length Digital inputs/outputs S 13.56 MHz I-Code1
(e. g. MDS D139, MDS D160) S Transponder in accordance with ISO 15693
(e. g. I-Code SLI, Tag-it HFI, my-d SRF 55V10P) RS 422 Asynchronous 8 bit 19.2 kBaud CRC 16 1 W Typically 300 mm (see field data)1 MDS read, write, initialize Command strings are not permitted. The Repeat command has not been implemented. The greatest possible length of the user data field in a command is 233 bytes. FC 45 3964 R No 24 VDC 20 V to 30 VDC 150 mA 600 mA 300 m 3.60 m None 5-38 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices Table 5-18 SLG D11S ANT D5 technical data Housing Dimensions (in mm) For antenna [L x W x H]
for the electronics
[L x B x H]
Antenna SLG housing Antenna SLG housing 340 x 325 x 38 160 x 80 x 40 (without connector) Black Anthracite Plastic ASA Plastic (PA 12) Color Material Connector Antenna (can be connected to the SLG) TNC connector Mounting of SLG Mounting of antenna Ambient temperature in operation in transport and storage Protection rating in accordance with EN 60529 SLG and antenna Shock in accordance with EN 60721-3-7 Class 7M2 Total shock reply spectrum type II Vibration in accordance with EN 60721-3-7 Class 7M2 Weight, approx. SLG Antenna Certifications 2 M5 screws 4 M5 screws 25 C to +70 C 25 C to +70 C IP65 30 g 1 g (9 to 200 Hz)/
1.5 g (200 to 500 Hz) Approx. 600 g Approx. 1000 g Radio EN 300 330 CE Safe for pacemakers 1 To ensure optimal field data in a metallic environment, the ANT D5 is calibrated at the factory at a distance of 100 mm from metal. Field data Table 5-19 SLG D11S ANT D5 field data Limit distance (Sg) Working distance (Sa) Max. 300 mm
(dependent on transponder) 0 to 240 mm
(dependent on transponder) Length of the transmission window (Ld) 300 mm MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-39 Read/Write Devices Table 5-19 SLG D11S ANT D5 field data Width of the transmission window (W) Minimum distance from ANT D5 to ANT D5 120 mm 2 m Transmission window Ld 1 At Sa, min the transmission window increases 1 Sa, min. Sa, max. Transmission window ANT D5 Spacing kit Top view Sg Sg Sa 100 Side view Metal plate Figure 5-25 SLG D11S ANT D5 transmission window 5-40 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Metal-free space Metal-free space with flush mounting a = 150 mm Metal a Read/Write Devices a a a FCC information h = 100 mm (non-metallic spacers) Figure 5-26 SLG D11S ANT D5 metal-free space Made in Germany SIEMENS MOBY D SLG D11S FCC ID NXW-MOBYD-SLGD11 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Caution Any changes or modifications not expressly approved by the party responsi-
ble for compliance could void the users authority to operate the equipment. MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-41 Read/Write Devices Definition of the distance D D D Distance D 2 m Figure 5-27 Distance D: SLG D11S ANT D5 5-42 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices Dimensions (in mm) 100 Ferrite Cable length 3.5 m Minimal bending radius: 20 mm 4 x 5.5 Anti-kink protection bendable in all directions 0 4 3 5 0 6 1 0 4 6 2 5.5 5 A 12 33 80 View A 300 325 1 3 7 Figure 5-28 SLG D11S ANT D5 dimensioned drawing Note In order to ensure optimal field data in surroundings where there is metal as well, the ANT D5 is calibrated at the factory at a distance of 100 mm from metal. MOBY D ANT D5 spacer kit See Chapter 5.2 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-43 Read/Write Devices 5.7 SLG D12S Application area The SLG D12 is a medium-performance read/write device with a serial inter-
face and an integrated antenna, designed for a range of up to 150 mm (depen-
ding upon the label). The read/write device has an RS 422 serial interface, which permits communication via interface modules (ASM 452, ASM 473 und ASM 475) to the SIMATIC S7 or PROFIBUS-DP-V1. FC 45 is available to the user for simple and rapid programming. A robust housing and the high degree of protection (IP65) permit deployment in the most severe industrial environments. Figure 5-29 SLG D12S read/write device Ordering information Table 5-20 SLG D12S ordering information SLG D12S read/write device With an RS 422 serial interface for connecting to an ASM 452, ASM 473 und ASM 475, with integrated antenna Accessories:
MOBY DC 24 V wide-range power pack Cables and Connectors Order No. 6GT2 602-0AB00 6GT2 494-0AA00 See Section 3.6 5-44 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices Technical data Table 5-21 SLG D12S technical data Inductive interface to MDS Transmission frequency Supported transponders Serial interface to user Transmission protocol Data transmission speed Data backup Output power S 13.56 MHz I-Code1
(e. g. MDS D139, MDS D160) S Transponder in accordance with ISO 15693
(e. g. I-Code SLI, Tag-it HFI, my-d SRF 55V10P) RS 422 Asynchronous 8 bit 19.2 kBaud CRC 16 1 W SLG MDS read/write distances Typically 150 mm (see field data) Software functions Programming Transmission protocol Multitag Power supply Operation Permissible range Current consumption Operation Transient making current Line length (SLG SIMATIC S 7) With RS 422 Digital inputs/outputs Housing Dimensions (L x B x H) in mm, without connectors Color Material Mounting Ambient temperature in operation in transit and storage MDS read, write, initialize Command strings are not permitted. The Repeat command has not been im-
plemented. The greatest possible length of the user data field in a command is 233 bytes. FC 45 3964 R No 24 VDC 20 V to 30 VDC 150 mA 600 mA 300 m None 160 x 80 x 40 Anthracite Plastic (PA 12) 2 M5 screws 25 C to +70 C 25 C to +70 C MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-45 Read/Write Devices Table 5-21 SLG D12S technical data Protection rating in accordance with EN 60529 Shock in accordance with EN 60721-3-7 Class 7 M2 Total shock response spectrum Type II Vibration in accordance with EN 60721-3-7 Class 7M2 Weight, approx. Certifications IP65 30 g 1 g (9 to 200 Hz)/
1.5 g (200 to 500 Hz) 600 g Radio EN 300 330 CE Safe for pacemakers Field data Table 5-22 SLG D12S field data Limit distance (Sg) Working distance (Sa) Max. 150 mm
(dependent on transponder) 0 to 120 mm
(dependent on transponder) Length of the transmission window (Ld) Width of the transmission window (W) Minimal distance from SLG D12S to SLG D12S 120 mm 48 mm 500 mm 5-46 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices Transmission window Transmission window Transponder Side view SLG D12S Standard Configuration:
lengthwise x-axis (Lx) Top view 1 1 At Sa, min the transmission window can be enlarged in comparison to the standard configuration Figure 5-30 Transmission window of the SLG D12S MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-47 Read/Write Devices Metal-free space Metal h h = Physical height of the SLG = 40 mm b b a a FCC information Metal a, b = Metal-free distances = 50 mm Figure 5-31 SLG D12S metal-free space Made in Germany SIEMENS MOBY D SLG D12S FCC ID NXW-MOBYD-SLGD12 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Caution Any changes or modifications not expressly approved by the party responsi-
ble for compliance could void the users authority to operate the equipment. 5-48 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 Read/Write Devices Definition of the Distance D D D Distance D 0.5 m Figure 5-32 Distance D: SLG D12S MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618 5-49 Read/Write Devices Dimensions (in mm) 5 40 80 X Y A 70 90 160 5.5 5 View A 26 12 33 Figure 5-33 Dimensioned drawing SLG D12S 5-50 MOBY D Configuration, Installation and Service Manual
(4) J31069-D0147-U001-A3-7618
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2004-09-09 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2004-09-09
|
||||
1 | Applicant's complete, legal business name |
Siemens AG
|
||||
1 | FCC Registration Number (FRN) |
0006191076
|
||||
1 | Physical Address |
Gleiwitzer Str. 555
|
||||
1 |
Nuernberg, N/A 90475
|
|||||
1 |
Germany
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
s******@phoenix-testlab.de
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
NXW
|
||||
1 | Equipment Product Code |
MOBYD-SLGD10
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
T******** E******** S******
|
||||
1 | Title |
Manager, Compliance Engineering
|
||||
1 | Telephone Number |
00499********
|
||||
1 | Fax Number |
00499********
|
||||
1 |
t******@siemens.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Senton GmbH
|
||||
1 | Name |
J**** R********
|
||||
1 | Physical Address |
Aeussere Fruehlingstrasse 45
|
||||
1 |
Straubing, D-94315
|
|||||
1 |
Germany
|
|||||
1 | Telephone Number |
+49 9********
|
||||
1 | Fax Number |
+49 9********
|
||||
1 |
j******@senton.de
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Senton GmbH
|
||||
1 | Name |
J******** R****
|
||||
1 | Physical Address |
Aeussere Fruehlingstrasse 45
|
||||
1 |
Straubing, D-94315
|
|||||
1 |
Germany
|
|||||
1 | Telephone Number |
+49 9********
|
||||
1 | Fax Number |
+49 9********
|
||||
1 |
j******@senton.de
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Tag Reader System | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | This device approved only for use with the antennas documented in the filing. This device is designed for professional use only. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
TUV SUD Product Service GmbH PS-EMC-STR
|
||||
1 | Name |
R****** H******
|
||||
1 | Telephone Number |
49-09********
|
||||
1 | Fax Number |
49-09********
|
||||
1 |
r******@tuev-sued.de
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 13.56000000 | 13.56000000 | 0.0100000000 % |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC