| all | frequencies |
|
|
|
|
|
exhibits | applications |
|---|---|---|---|---|---|---|---|---|
| manuals | ||||||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 2 3 |
|
4112880 AirPrime Hardware Integration Guide v1 - Review A | Users Manual | 257.44 KiB | December 12 2012 | |||
| 1 2 3 |
|
FCC statement | Users Manual | 156.01 KiB | April 05 2015 | |||
| 1 2 3 |
|
Getting Started Guide | Users Manual | 1.15 MiB | April 05 2015 | |||
| 1 2 3 |
|
TempConfidential 4112880 AirPrime Hardware Integration Guide v2 | Users Manual | 257.50 KiB | October 02 2013 | |||
| 1 2 3 |
|
Warranty, Safety and Regulatory information | Users Manual | 464.72 KiB | April 05 2015 | |||
| 1 2 3 | Cover Letter(s) | |||||||
| 1 2 3 | Cover Letter(s) | |||||||
| 1 2 3 | External Photos | |||||||
| 1 2 3 | ID Label/Location Info | |||||||
| 1 2 3 | ID Label/Location Info | |||||||
| 1 2 3 | Cover Letter(s) | |||||||
| 1 2 3 | Internal Photos | |||||||
| 1 2 3 | ID Label/Location Info | |||||||
| 1 2 3 | RF Exposure Info | |||||||
| 1 2 3 | RF Exposure Info | |||||||
| 1 2 3 | RF Exposure Info | |||||||
| 1 2 3 | RF Exposure Info | |||||||
| 1 2 3 |
|
User Manual Draft Letter | Cover Letter(s) | 103.49 KiB | ||||
| 1 2 3 | ID Label/Location Info | |||||||
| 1 2 3 | ID Label/Location Info | |||||||
| 1 2 3 | Cover Letter(s) | |||||||
| 1 2 3 | Cover Letter(s) | |||||||
| 1 2 3 | External Photos | |||||||
| 1 2 3 | Attestation Statements | December 12 2012 | ||||||
| 1 2 3 | External Photos | December 12 2012 | ||||||
| 1 2 3 | Cover Letter(s) | December 12 2012 | ||||||
| 1 2 3 | ID Label/Location Info | December 12 2012 | ||||||
| 1 2 3 | RF Exposure Info | December 12 2012 | ||||||
| 1 2 3 | RF Exposure Info | October 02 2013 | ||||||
| 1 2 3 | Internal Photos | December 12 2012 | ||||||
| 1 2 3 | Test Report | December 12 2012 | ||||||
| 1 2 3 | Test Report | October 02 2013 | ||||||
| 1 2 3 | Test Report | December 12 2012 | ||||||
| 1 2 3 | Test Report | October 02 2013 | ||||||
| 1 2 3 | Test Report | December 12 2012 | ||||||
| 1 2 3 | Test Report | October 02 2013 | ||||||
| 1 2 3 | Test Report | December 12 2012 | ||||||
| 1 2 3 | Test Report | October 02 2013 | ||||||
| 1 2 3 | Test Report | |||||||
| 1 2 3 | Test Setup Photos | December 12 2012 |
| 1 2 3 | 4112880 AirPrime Hardware Integration Guide v1 - Review A | Users Manual | 257.44 KiB | December 12 2012 |
AirPrime EM7355 Hardware Integration Guide 4112880 Rev 1 Distribution under NDA only Contents subject to change Important Notice Safety and Hazards Limitation of Liability Preface Due to the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Sierra Wireless modem are used in a normal manner with a well-constructed network, the Sierra Wireless modem should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Sierra Wireless accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Sierra Wireless modem, or for failure of the Sierra Wireless modem to transmit or receive such data. Do not operate the Sierra Wireless modem in areas where blasting is in progress, where explosive atmospheres may be present, near medical equipment, near life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the Sierra Wireless modem MUST BE POWERED OFF. The Sierra Wireless modem can transmit signals that could interfere with this equipment. Do not operate the Sierra Wireless modem in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the Sierra Wireless modem MUST BE POWERED OFF. When operating, the Sierra Wireless modem can transmit signals that could interfere with various onboard systems. Note: Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open. Sierra Wireless modems may be used at this time. The driver or operator of any vehicle should not operate the Sierra Wireless modem while in control of a vehicle. Doing so will detract from the driver or operator's control and operation of that vehicle. In some states and provinces, operating such communications devices while in control of a vehicle is an offence. The information in this manual is subject to change without notice and does not represent a commitment on the part of Sierra Wireless. SIERRA WIRELESS AND ITS AFFILIATES SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUE OR ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE ANY SIERRA WIRELESS PRODUCT, EVEN IF SIERRA WIRELESS AND/OR ITS AFFILIATES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR THEY ARE FORESEEABLE OR FOR CLAIMS BY ANY THIRD PARTY. Notwithstanding the foregoing, in no event shall Sierra Wireless and/or its affiliates aggregate liability arising under or in connection with the Sierra Wireless product, regardless of the number of events, occurrences, or claims giving rise to liability, be in excess of the price paid by the purchaser for the Sierra Wireless product. Rev 1 Dec.12 Proprietary and Confidential - Contents subject to change 3 Hardware Integration Guide Patents Copyright Trademarks Contact Information This product may contain technology developed by or for Sierra Wireless Inc. This product includes technology licensed from QUALCOMM. This product is manufactured or sold by Sierra Wireless Inc. or its affiliates under one or more patents licensed from InterDigital Group. 2012 Sierra Wireless. All rights reserved. AirCard is a registered trademark of Sierra Wireless. Sierra Wireless, AirPrime, Watcher, and the Sierra Wireless logo are trademarks of Sierra Wireless. Windows is a registered trademark of Microsoft Corporation. QUALCOMM is a registered trademark of QUALCOMM Incorporated. Used under license. Other trademarks are the property of their respective owners. Sales Desk:
Post:
1-604-232-1488 8:00 AM to 5:00 PM Pacific Time sales@sierrawireless.com Phone:
Hours:
E-mail:
Sierra Wireless 13811 Wireless Way Richmond, BC Canada V6V 3A4 Technical support:
RMA support:
Fax:
Web:
support@sierrawireless.com repairs@sierrawireless.com 1-604-231-1109 www.sierrawireless.com Consult our website for up-to-date product descriptions, documentation, application notes, firmware upgrades, troubleshooting tips, and press releases:
Revision History www.sierrawireless.com Revision number Release date Changes 1 December 2012 FCC / IC certification 4 Proprietary and Confidential - Contents subject to change 4112880 Contents Introduction . 7 Accessories . 7 Required connectors . 7 Power . 9 Power supply . 9 Module power states . 9 RF Specifications . 11 RF connections . 12 Shielding . 12 Antenna and cabling . 13 Ground connection. 14 Interference and sensitivity. 14 Interference from other wireless devices . 14 Host-generated RF interference . 14 Device-generated RF interference . 15 Methods to mitigate decreased Rx performance . 15 Radiated Spurious Emissions (RSE) . 15 Radiated sensitivity measurement . 16 Regulatory Compliance and Industry Certifications . 17 Important notice . 17 Safety and hazards . 17 Important compliance information for North American users . 18 Acronyms . 21 Index . 27 Rev 1 Dec.12 Proprietary and Confidential - Contents subject to change 5 Hardware Integration Guide 6 Proprietary and Confidential - Contents subject to change 4112880 1: Introduction 1 The Sierra Wireless EM7355 Embedded Module is an M.2 modem that provides LTE, DC-HSPA+, HSPA+, HSDPA, HSUPA, WCDMA, GSM, GPRS, EDGE, CDMA, and GNSS connectivity for notebook, ultrabook, and tablet computers over several radio frequency bands. The device also supports 2G / 3G roaming. Accessories A hardware development kit is available for AirPrime M.2 modules. The kit contains hardware components for evaluating and developing with the module, including:
Other accessories Development board Cables Antennas For over-the-air LTE testing, ensure that suitable antennas are used. Required connectors Table 1-1 describes the connectors used to integrate the EM7355 Embedded Module into your host device. Table 1-1: Required host-module connectors Connector type Description RF cables
Mate with M.2-spec connectors
Three connector jacks EDGE (67 pin)
Slot B compatible Per the M.2 standard (PCI Express NGFF
(M.2) Electromechanical Specification Revision 0.7), a generic 75 pin position EDGE connector on the motherboard uses a mechanical key to mate with the 67 pin notched module connector.
Manufacturers include LOTES (part #APCI0018-P001A01), Kyocera, JAE, Tyco, and Longwell. SIM
Industry-standard connector. Rev 1 Dec.12 Proprietary and Confidential - Contents subject to change 7 Hardware Integration Guide 8 Proprietary and Confidential - Contents subject to change 4112880 2: Power 2 Power supply The host provides power to the EM7355 through multiple power and ground pins. The host must provide safe and continuous power (via battery or a regulated power supply) at all times; the module does not have an independent power supply, or protection circuits to guard against electrical issues. For detailed pinout and voltage / current requirements of this module, see the AirPrime EM7355 Product Technical Specification &
Customer Design Guidelines. Module power states The module has five power states, as described in Table 2-1. Table 2-1: Module power states State Details Normal
(Default state) Low power
(Airplane mode)
Module is active Default state. Occurs when VCC is first applied, Full_Card_Power_Off# is deasserted (pulled high), and W_DISABLE#1 is deasserted Module is capable of placing / receiving calls, or establishing data connections on the wireless network Current consumption is affected by several factors, including:
Radio band being used
Transmit power
Receive gain settings
Data rate Module is active Module enters this state:
Under host interface control:
Host issues AT+CFUN=0 ([1] AT Command Set for User Equipment (UE)
(Release 6) (Doc# 3GPP TS 27.007))), or Host asserts W_DISABLE#1, after AT!PCOFFEN=0 has been issued.
Automatically, when critical temperature or voltage trigger limits have been reached)) d e r e w o p s i e l u d o M d e r e w o p s i t s o H e v i t c a e c a f r e t n i B S U d e l b a n e F R Rev 1 Dec.12 Proprietary and Confidential - Contents subject to change 9 Hardware Integration Guide Table 2-1: Module power states (Continued) State Details Sleep Off
Normal state of module between calls or data connections Module cycles between wake (polling the network) and sleep, at network provider-
determined interval. Host keeps module powered off by asserting Full_Card_Power_Off# (signal pulled low or left floating) Module draws minimal current See Full_Card_Power_Off# and RESET# on page 41 for more information. d e r e w o p s i e l u d o M d e r e w o p s i t s o H e v i t c a e c a f r e t n i B S U d e l b a n e F R Disconnected Host power source is disconnected from the module and all voltages associated with the module are at 0 V. 10 Proprietary and Confidential - Contents subject to change 4112880 3: RF Specifications 3 The EM7355 operates on the frequency bands listed below. Table 3-1: LTE frequency band support Band Frequencies Band 2 Band 4 (AWS) Band 5 Band 13 Band 17 Band 25 Tx: 18501910 MHz Rx: 19301990 MHz Tx: 17101755 MHz Rx: 21102155 MHz Tx: 824849 MHz Rx: 869894 MHz Tx: 777787 MHz Rx: 746756 MHz Tx: 704716 MHz Rx: 734746 MHz Tx: 18501915 MHz Rx: 19301995 MHz Table 3-2: WCDMA frequency band support1 Band Frequencies Band 1 WCDMA 2100 Band 2 WCDMA 1900 Tx: 19201980 MHz Rx: 21102170 MHz Tx: 18501910 MHz Rx: 19301990 MHz Band 4 AWS 1700/2100 Tx: 17101755 MHz Rx: 21102155 MHz Band 5 WCDMA 850 Band 8 WCDMA 900 Tx: 824849 MHz Rx: 869894 MHz Tx: 880915 MHz Rx: 925960 MHz 1. WCDMA channel spacing is 5 MHz, but this can be adjusted to optimize performance in a particular deployment scenario. Table 3-3: GSM frequency band support Band Frequencies GSM 850 EGSM 900 Tx: 824849 MHz Rx: 869894 MHz Tx: 880915 MHz Rx: 925960 MHz Rev 1 Dec.12 Proprietary and Confidential - Contents subject to change 11 Hardware Integration Guide Table 3-3: GSM frequency band support (Continued) Band Frequencies GSM 1800 GSM 1900 Tx: 17101785 MHz Rx: 18051880 MHz Tx: 18501910 MHz Rx: 19301990 MHz Table 3-4: CDMA frequency band support Band Frequencies Band Class 0
(Cellular 800 MHz) Tx: 824849 MHz Rx: 869894 MHz Band Class 1
(PCS) Tx: 18501910 MHz Rx: 19301990 MHz Band Class 10
(Secondary 800 MHz)1 Tx: 816824 MHz Rx: 861869 MHz 1. BC10 subclasses 2 and 3 (system designator C and D) are sup-
ported Table 3-5: GNSS frequency band support Band Frequencies Narrow-band GPS Rx: 1575.42 MHz Wide-band GPS + GLONASS Rx: 15651606 MHz RF connections When attaching antennas to the module:
Use any of the following (or compatible) 2x2 mm RF receptacle connectors to attach antennas to the modules connection points
Match coaxial connections between the module and the antenna to 50 .
Minimize RF cable losses to the antenna; the recommended maximum cable
loss for antenna cabling is 0.5 dB. To ensure best thermal performance, if possible use the mounting hole to attach (ground) the device to a metal chassis. Note: If the antenna connection is shorted or open, the modem will not sustain permanent damage. Shielding The module is fully shielded to protect against EMI and must not be removed. 12 Proprietary and Confidential - Contents subject to change 4112880 RF Specifications Antenna and cabling When selecting the antenna and cable, it is critical to RF performance to match antenna gain and cable loss. Choosing the correct antenna and cabling When matching antennas and cabling:
The antenna (and associated circuitry) should have a nominal impedance of 50 with a return loss of better than 10 dB across each frequency band of operation. The system gain value affects both radiated power and regulatory (FCC, IC, CE, etc.) test results. Designing custom antennas Consider the following points when designing custom antennas:
A skilled RF engineer should do the development to ensure that the RF performance is maintained. If both UMTS and CDMA modules will be installed in the same platform, you may want to develop separate antennas for maximum performance. Determining the antennas location When deciding where to put the antennas:
Antenna location may affect RF performance. Although the module is shielded to prevent interference in most applications, the placement of the antenna is still very important if the host device is insufficiently shielded, high levels of broadband or spurious noise can degrade the modules perfor-
mance. Connecting cables between the module and the antenna must have 50 impedance. If the impedance of the module is mismatched, RF performance is reduced significantly. Antenna cables should be routed, if possible, away from noise sources
(switching power supplies, LCD assemblies, etc.). If the cables are near the noise sources, the noise may be coupled into the RF cable and into the antenna. Disabling the diversity antenna
For LTE / UMTS bands, use the AT command !RXDEN=0 to disable receive diversity or !RXDEN=1 to enable receive diversity. For CDMA bands, use the AT command !DIVERSITY to enable or disable receive diversity.
Note: A diversity antenna is used to improve connection quality and reliability through redundancy. Because two antennas may experience difference interference effects (signal distortion, delay, etc.), when one antenna receives a degraded signal, the other may not be similarly affected. Rev 1 Dec.12 Proprietary and Confidential - Contents subject to change 13 Hardware Integration Guide Ground connection When connecting the module to system ground:
Prevent noise leakage by establishing a very good ground connection to the module through the host connector. Connect to system ground using the modules mounting hole.
Minimize ground noise leakage into the RF. Depending on the host board design, noise could potentially be coupled to the module from the host board. This is mainly an issue for host designs that have signals traveling along the length of the module, or circuitry operating at both ends of the module interconnects. Interference and sensitivity Several interference sources can affect the modules RF performance
(RF desense). Common sources include power supply noise and device-
generated RF. RF desense can be addressed through a combination of mitigation techniques
(Methods to mitigate decreased Rx performance on page 15) and radiated sensitivity measurement (Radiated sensitivity measurement on page 16). Note: The EM7355 is based on ZIF (Zero Intermediate Frequency) technologies. When performing EMC (Electromagnetic Compatibility) tests, there are no IF (Intermediate Frequency) components from the module to consider. Interference from other wireless devices Wireless devices operating inside the host device can cause interference that affects the module. To determine the most suitable locations for antennas on your host device, evaluate each wireless devices radio system, considering the following:
Any harmonics, sub-harmonics, or cross-products of signals generated by wireless devices that fall in the modules Rx range may cause spurious response, resulting in decreased Rx performance. The Tx power and corresponding broadband noise of other wireless devices may overload or increase the noise floor of the modules receiver, resulting in Rx desense.
The severity of this interference depends on the closeness of the other antennas to the modules antenna. To determine suitable locations for each wireless devices antenna, thoroughly evaluate your host devices design. Host-generated RF interference All electronic computing devices generate RF interference that can negatively affect the receive sensitivity of the module. 14 Proprietary and Confidential - Contents subject to change 4112880 RF Specifications Display panel and display drivers Switching-mode power supplies Proximity of host electronics to the antenna in wireless devices can contribute to decreased Rx performance. Components that are most likely to cause this include:
Microprocessor and memory
Device-generated RF interference The module can cause interference with other devices. Wireless devices such as AirPrime embedded modules transmit in bursts (pulse transients) for set durations
(RF burst frequencies). Hearing aids and speakers convert these burst frequencies into audible frequencies, resulting in audible noise. Methods to mitigate decreased Rx performance It is important to investigate sources of localized interference early in the design cycle. To reduce the effect of device-generated RF on Rx performance:
Put the antenna as far as possible from sources of interference. The drawback is that the module may be less convenient to use. Shield the host device. The module itself is well shielded to avoid external interference. However, the antenna cannot be shielded for obvious reasons. In most instances, it is necessary to employ shielding on the components of the host device (such as the main processor and parallel bus) that have the highest RF emissions. Filter out unwanted high-order harmonic energy by using discrete filtering on low frequency lines. Form shielding layers around high-speed clock traces by using multi-layer PCBs. Route antenna cables away from noise sources.
Radiated Spurious Emissions (RSE) When designing an antenna for use with AirPrime embedded modules, the host device with an AirPrime embedded module must satisfy the radiated spurious emission (RSE) test cases described in:
(CDMA) Refer to CDMA standards for receive-only mode, and local regulatory bodies for transmit mode (transmitter is operating). CE/ETSI EN 301 908 (WCDMA), test numbers 5.3.1 (Radiated Emissions
(UE)) CE/ETSI EN 301 511 (GSM), test 5.2.16 (Radiated Spurious Emissions - MS allocated a channel). This test uses the procedure and requirement outlined in 3GPP 51.010 (GSM) section 12.2.1 of the same test name.
Note that antenna impedance affects radiated emissions, which must be compared against the conducted 50-ohm emissions baseline. (AirPrime embedded modules meet the 50-ohm conducted emissions requirement.) Rev 1 Dec.12 Proprietary and Confidential - Contents subject to change 15 Hardware Integration Guide Note: GSM spurious emissions are most likely to have RSE issues, but in general, RSE requirements must be met on all models with user-designed antennas. Radiated sensitivity measurement A wireless host device contains many noise sources that contribute to a reduction in Rx performance. To determine the extent of any receiver performance desensitization due to self-
generated noise in the host device, over-the-air (OTA) or radiated testing is required. This testing can be performed by Sierra Wireless or you can use your own OTA test chamber for in-house testing. 16 Proprietary and Confidential - Contents subject to change 4112880 4: Regulatory Compliance and Industry Certifications 4 This module is designed to meet, and upon commercial release, will meet the requirements of the following regulatory bodies and regulations, where applicable:
Federal Communications Commission (FCC) of the United States The Certification and Engineering Bureau of Industry Canada
(IC) The National Communications Commission (NCC) of Taiwan, Republic of China
Upon commercial release, the following industry certifications will have been obtained, where applicable:
GCF-CC (For Verizon 2G / 3G approval)
PTCRB CDG2 Additional certifications may be obtained upon customer request contact your Sierra Wireless account representative for details. Additional testing and certification may be required for the end product with an embedded EM7355 modem and are the responsibility of the OEM. Sierra Wireless offers professional services-based assistance to OEMs with the testing and certification process, if required. Important notice Because of the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Sierra Wireless modem are used in a normal manner with a well-
constructed network, the Sierra Wireless modem should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Sierra Wireless and its affiliates accept no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Sierra Wireless modem, or for failure of the Sierra Wireless modem to transmit or receive such data. Safety and hazards Do not operate your EM7355 modem:
In areas where blasting is in progress Rev 1 Dec.12 Proprietary and Confidential - Contents subject to change 17 Hardware Integration Guide
Where explosive atmospheres may be present including refuelling points, fuel
depots, and chemical plants Near medical equipment, life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the EM7355 modem MUST BE POWERED OFF. Otherwise, the EM7355 modem can transmit signals that could interfere with this equipment. In an aircraft, the EM7355 modem MUST BE POWERED OFF. Otherwise, the EM7355 modem can transmit signals that could interfere with various onboard systems and may be dangerous to the operation of the aircraft or disrupt the cellular network. Use of a cellular phone in an aircraft is illegal in some jurisdictions. Failure to observe this instruction may lead to suspension or denial of cellular telephone services to the offender, or legal action or both. Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open. The EM7355 modem may be used normally at this time. Important compliance information for North American users Note: Details are preliminary and subject to change. The EM7355 modem has been granted modular approval for mobile applications. Integrators may use the EM7355 modem in their final products without additional FCC / IC (Industry Canada) certification if they meet the following conditions. Otherwise, additional FCC / IC approvals must be obtained. 1. At least 20 cm separation distance between the antenna and the users body must be maintained at all times. 2. To comply with FCC / IC regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed:
6.5 dBi in Cellular band 3.0 dBi in PCS band 3.0 dBi in LTE Band 2 6.0 dBi in LTE Band 4 6.5 dBi in LTE Band 5 9.0 dBi in LTE Band 13 (Note: LTE Band 13 is not permitted in Canada.) 9.0 dBi in LTE Band 17 (Note: LTE Band 17 is not permitted in Canada.) 3.0 dBi in LTE Band 25 3. The EM7355 modem may transmit simultaneously with other collocated radio transmitters within a host device, provided the following conditions are met:
Each collocated radio transmitter has been certfied by FCC / IC for mobile application. At least 20 cm separation distance between the antennas of the collocated transmitters and the users body must be maintained at all times. 18 Proprietary and Confidential - Contents subject to change 4112880 Regulatory Compliance and Industry Certifications The output power and antenna gain must not exceed the limits and configu-
rations stipulated in the following table. Device Technology Band Frequency
(MHz) EM7355 Embedded Module LTE UMTS 2 4 5 13 17 25 2 4 5 GSM 850 18501910 17101755 824849 777787 704716 18501915 18501910 17101755 824849 824849 CDMA 1900 18501910 BC0 BC1 824849 18501910 BC10 816823.975 Collocated transmitters1 WLAN WiMAX BT 24002500 51505850 23002400 25002700 33003800 24002500 Maximum conducted power
(dBm) 24 24 24 24 24 24 24 24 24 33 30 25 25 25 29 29 29 29 29 15 Maximum antenna gain
(dBi) 3 6 3 6 6 3 3 6 3 3 3 3 3 3 5.0 5.0 5.0 5.0 5.0 5.0 1. Valid collocated transmitter combinations: WLAN+BT; WiMAX+BT.
(WLAN+WiMAX+BT is not permitted.) 4. A label must be affixed to the outside of the end product into which the EM7355 modem is incorporated, with a statement similar to the following:
This device contains FCC ID: N7NEM7355 Contains transmitter module IC: 2417C-EM7355 where 2417C-EM7355 is the modules certification number. 5. A user manual with the end product must clearly indicate the operating requirements and conditions that must be observed to ensure compliance with current FCC / IC RF exposure guidelines. Rev 1 Dec.12 Proprietary and Confidential - Contents subject to change 19 Hardware Integration Guide The end product with an embedded EM7355 modem may also need to pass the FCC Part 15 unintentional emission testing requirements and be properly authorized per FCC Part 15. Note: If this module is intended for use in a portable device, you are responsible for separate approval to satisfy the SAR requirements of FCC Part 2.1093 and IC RSS-102. 20 Proprietary and Confidential - Contents subject to change 4112880 5: Acronyms 5 Table 5-1: Acronyms and definitions Acronym or term Definition 1xEV-DO Single Carrier (1X) EVolution Data Only. A high-speed standard for cellular packet data communications. Supports Internet connections with data rates up to 3.1 Mbps (downlink from the network) and 1.8 Mbps (uplink to the network). Average data rates are roughly: for Rev. A: 600 1300 kbps (downlink from the network) and 300 400 kbps (uplink to the network); for Rev. 0: 400 700 kbps (downlink from the network) and 40 80 kbps (uplink to the network). Actual speed depends on the network conditions. Compare to 1X. 1X 3GPP 8PSK AGC A-GPS A-GNSS API BER BLER bluetooth CAIT CDG CDMA CQI COM CS CW Single Carrier (1X) Radio Transmission Technology. A high-speed standard for cellular packet data communications. Supports Internet connections with data rates up to 153 kbps (simultaneously in each directiondownlink and uplink). Actual speed depends on the network conditions. Compare to 1xEV-DO. 3rd Generation Partnership Project Octagonal Phase Shift Keying Automatic Gain Control Assisted GPS Assisted GNSS Application Programming Interface Bit Error Rate A measure of receive sensitivity Block Error Rate Wireless protocol for data exchange over short distances CDMA Air Interface Tool CDMA Development Groupa consortium of companies that develop and promote the products and services for CDMA wireless systems. Code Division Multiple Access. A wideband spread spectrum technique used in digital cellular, personal communications services, and other wireless networks. Wide channels (1.25 MHz) are obtained through spread spectrum transmissions, thus allowing many active users to share the same channel. Each user is assigned a unique digital code, which differentiates the individual conversations on the same channel. Channel Quality Indication Communication port Circuit-switched Continuous waveform Rev 1 Dec.12 Proprietary and Confidential - Contents subject to change21 Hardware Integration Guide Table 5-1: Acronyms and definitions (Continued) Acronym or term Definition dB Decibel = 10 x log10 (P1 / P2) P1 is calculated power; P2 is reference power Decibel = 20 x log10 (V1 / V2) V1 is calculated voltage, V2 is reference voltage dBm DC-HSPA+
DCS DL DUN DRX DSM DUT EDGE eHRPD EIRP EMC EMI ERP ESD FCC FDMA FER firmware FOTA FOV A logarithmic (base 10) measure of relative power (dB for decibels); relative to milliwatts (m). A dBm value will be 30 units (1000 times) larger (less negative) than a dBW value, because of the difference in scale (milliwatts vs. watts). Dual Carrier HSPA+
Digital Cellular System A cellular communication infrastructure that uses the 1.8 GHz radio spectrum. Downlink (network to mobile) Dial-Up Networking Discontinuous Reception Distributed Shared Memory Device Under Test Enhanced Data rates for GSM Evolution Evolved High Rate Packet Data Enhances traditional 1xEV-DO to enable LTE to CDMA handover. Effective (or Equivalent) Isotropic Radiated Power Electromagnetic Compatibility Electromagnetic Interference Effective Radiated Power Electrostatic Discharge Federal Communications Commission The U.S. federal agency that is responsible for interstate and foreign communications. The FCC regulates commercial and private radio spectrum management, sets rates for communications services, determines standards for equipment, and controls broadcast licensing. Consult www.fcc.gov. Frequency Division Multiple Access Frame Error Rate A measure of receive sensitivity. Software stored in ROM or EEPROM; essential programs that remain even when the system is turned off. Firmware is easier to change than hardware but more permanent than software stored on disk. Firmware Over The Air Technology used to download firmware upgrades directly from the service provider, over the air. Field Of View 22 Proprietary and Confidential - Contents subject to change 4112880 Acronyms Table 5-1: Acronyms and definitions (Continued) Acronym or term Definition FSN Factory Serial NumberA unique serial number assigned to the mini card during manufacturing. GCF GLONASS Global Certification Forum Global Navigation Satellite System A Russian system that uses a series of 24 satellites in middle circular orbit to provide navigational data. GMSK GNSS GPRS GPS GSM Host HSDPA HSPA+
HSUPA Hz IC IF IMEI IMS inrush current inter-RAT IOT IS IS-2000 IS-95 LED LHCP LNA Gaussian Minimum Shift Keying modulation Global Navigation Satellite Systems (GPS plus GLONASS) General Packet Radio Service Global Positioning System An American system that uses a series of 24 satellites in middle circular orbit to provide navigational data. Global System for Mobile Communications The device into which an embedded module is integrated High Speed Downlink Packet Access Enhanced HSPA, as defined in 3GPP Release 7 and beyond High Speed Uplink Packet Access Hertz = 1 cycle / second Industry Canada Intermediate Frequency International Mobile Equipment Identity IP Multimedia Subsystem Architectural framework for delivering IP multimedia services. Peak current drawn when a device is connected or powered on Radio Access Technology Interoperability Testing Interim Standard. After receiving industry consensus, the TIA forwards the standard to ANSI for approval. 3G radio standards for voice and data (CDMA only) 2G radio standards targeted for voice (cdmaONE) Light Emitting Diode. A semiconductor diode that emits visible or infrared light. Left-Hand Circular Polarized Low Noise Amplifier Rev 1 Dec.12 Proprietary and Confidential - Contents subject to change23 Hardware Integration Guide Table 5-1: Acronyms and definitions (Continued) Acronym or term Definition LPM LPT LTE Low Power Mode Line Print Terminal Long Term Evolutiona high-performance air interface for cellular mobile communication systems. MCS MHz MEID MIMO NAS / AS NC NIC NMEA OEM OFDMA OMA DM OTA PA packet PCB PCS PDN PMI PSS PST PTCRB QAM QMI Modulation and Coding Scheme Megahertz = 10e6 Hz Mobile Equipment Identifier The unique second-generation serial number assigned to the minicard for use on the wireless network. Multiple Input Multiple Outputwireless antenna technology that uses multiple antennas at both transmitter and receiver side. This improves performance. Network Access Server No Connect Network Interface Card National Marine Electronics Association Original Equipment Manufacturera company that manufactures a product and sells it to a reseller. Orthogonal Frequency Division Multiple Access Open Mobile Alliance Device Management A device management protocol. Over the air (or radiated through the antenna) Power Amplifier A short, fixed-length block of data, including a header, that is transmitted as a unit in a communications network. Printed Circuit Board Personal Communication System A cellular communication infrastructure that uses the 1.9 GHz radio spectrum. Packet Data Network Pre-coding Matrix Index Primary synchronisation signal Product Support Tools PCS Type Certification Review Board Quadrature Amplitude Modulation. This form of modulation uses amplitude, frequency, and phase to transfer data on the carrier wave. Qualcomm MSM/Modem Interface 24 Proprietary and Confidential - Contents subject to change 4112880 Table 5-1: Acronyms and definitions (Continued) Acronyms Quality of Service Acronym or term Definition QOS QPSK QPST RAT RF RI roaming Ring Indicator Radio Frequency Quadrature Phase-Shift Keying Qualcomm Product Support Tools Radio Access Technology A cellular subscriber is in an area where service is obtained from a cellular service provider that is not the subscribers provider. Radiated Spurious Emissions Received Signal Strength Indication RSE RSSI SDK SED Sensitivity
(Audio) Sensitivity (RF) Measure of lowest power signal at the receiver input that can provide a prescribed Measure of lowest power signal that the receiver can measure. Software Development Kit Smart Error Detection BER / BLER / SNR value at the receiver output. SG SIB SIM SIMO SISO SKU SMS S/N SNR SOF SSS An LTE signaling interface for SMS (SMS over SGs) System Information Block Subscriber Identity Module. Also referred to as USIM or UICC. Single Input Multiple Outputsmart antenna technology that uses a single antenna at the transmitter side and multiple antennas at the receiver side. This improves performance and security. Single Input Single Outputantenna technology that uses a single antenna at both the transmitter side and the receiver side. Stock Keeping Unitidentifies an inventory item: a unique code, consisting of numbers or letters and numbers, assigned to a product by a retailer for purposes of identification and inventory control. Short Message Service. A feature that allows users of a wireless device on a wireless network to receive or transmit short electronic alphanumeric messages (up to 160 characters, depending on the service provider). Signal-to-noise (ratio) Signal-to-Noise Ratio Start of Frame A USB function. Secondary synchronisation signal. Rev 1 Dec.12 Proprietary and Confidential - Contents subject to change25 Hardware Integration Guide Table 5-1: Acronyms and definitions (Continued) Acronym or term Definition SUPL TIA/EIA Secure User Plane Location Telecommunications Industry Association / Electronics Industry Association. A standards setting trade organization, whose members provide communications and information technology products, systems, distribution services and professional services in the United States and around the world. Consult www.tiaonline.org. TIS TRP UDK UE UICC UL UMTS USB USIM VCC VSWR WAN WCDMA WLAN ZIF Total Isotropic Sensitivity Total Radiated Power Universal Development Kit (for PCI Express Mini Cards) User Equipment Universal Integrated Circuit Card (Also referred to as a SIM card.) Uplink (mobile to network) Universal Mobile Telecommunications System Universal Serial Bus Universal Subscriber Identity Module (UMTS) Supply voltage Voltage Standing Wave Ratio Wide Area Network Wideband Code Division Multiple Access (also referred to as UMTS) Wireless Local Area Network Zero Intermediate Frequency 26 Proprietary and Confidential - Contents subject to change 4112880 Index A accessories, 7 acronyms and definitions, 21 26 antenna connection considerations, 12 custom, design, 13 diversity antenna, disabling, 13 limit, matching coaxial connections, 12 location, considerations, 13 matching, considerations, 13 maximum cable loss, 12 routing, 13 approvals, regulatory and industry, 17 B bands supported, RF CDMA, 12 GSM, 11, 12 LTE, 11 WCDMA, 11 C cable loss antenna, maximum, 12 CDMA frequency band support, 12 connection grounding, 14 connectors, required host-module, 7 D desense. See RF diversity antenna disabling, 13 E EDGE connector, required, 7 F filtering, RF desense, 15 frequency band support CDMA, 12 GSM, 11, 12 LTE, 11 WCDMA, 11 G gain maximum, 18 grounding connection considerations, 14 GSM frequency band support, 11, 12 I impedance moduleantenna, 13 industry approvals, 17 interference device generated, 15 host-generated, 14 wireless devices, 14 L LTE frequency band support, 11 N noise leakage, minimizing, 14 P PCB multi-layer, shielding for RF desense, 15 R radiated sensitivity measurement, 16 radiated spurious emissions, 15 regulatory approvals, 17 regulatory information, 17 20 FCC, 18 limitation of liability, 17 safety and hazards, 17 Rev 1 Dec.12 Proprietary and Confidential - Contents subject to change 27 Hardware Integration Guide RF antenna cable loss, maximum, 12 antenna connection, considerations, 12 connectors, required, 7 desense device-generated, 14 harmonic energy, filtering, 15 mitigation suggestions, 15 shielding suggestions, 15 interference other devices, 15 wireless devices, 14 RF bands supported CDMA, 12 GSM, 11, 12 LTE, 11 WCDMA, 11 RF specifications, 11 16 RSE, 15 S sensitivity radiated measurement, overview, 16 shielding module, compliance, 12 reducing RF desense, 15 SIM connector, required, 7 specifications RF, 11 16 W WCDMA frequency band support, 11 Z ZIF (Zero Intermediate Frequency), 14 28 Proprietary and Confidential - Contents subject to change 4112880
| 1 2 3 | FCC statement | Users Manual | 156.01 KiB | April 05 2015 |
FCC Radio Frequency (RF) Exposure Information This device has been evaluated to, and shown to be compliant with, the FCC Radio Frequency
(RF) exposure limits. Devices such as Desktop computers and Access Points (AP) that contain wireless functions (such as 802.11, Bluetooth, 3G or 4G) must be installed to provide a separation distance of at least 20cm from people to ensure compliance with the RF exposure requirements. Certain laptop/notebook computers, with antennas located toward the top of the screen, may require a separation distance of at least 20cm between the antennas and persons when they are operating to ensure compliance with the RF exposure requirements. These laptop/notebook computers are designed such that, during normal use with the screen open, the antenna-to-user distance is greater than 20cm. Some devices may have additional requirements for operating conditions to ensure compliance with RF exposure requirements. Specific instructions, where required, will be contained in the manual for that device. Please read your operating manual carefully. Interference Statement This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer's instruction manual, may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Notice: The FCC regulations provide that changes or modifications not expressly approved by Dell Inc. could void your authority to operate this equipment. These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference with radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:
Reorient the receiving antenna. Relocate the system with respect to the receiver. Move the system away from the receiver. Plug the system into a different outlet so that the system and the receiver are on different branch circuits. If necessary, consult a representative of Dell Inc. or an experienced radio/television technician for additional suggestions. NOTE: Any additional Wireless module must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any other unauthorized installation or use will violate FCC Part 15 regulations. Modifications not expressly approved by Dell could void your authority to operate the equipment.
| 1 2 3 | Getting Started Guide | Users Manual | 1.15 MiB | April 05 2015 |
Dell Latitude 12 Rugged Extreme (7204) Getting Started Guide Regulatory Model: P18T Regulatory Type: P18T001 Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright 2015 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws. Dell and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be trademarks of their respective companies. 2014 - 02 Rev. A00 Contents 1 Finding Information and Resources.................................................................. 4 2 System Overview...................................................................................................5 3 Quick Setup............................................................................................................7 4 Removing and Installing Components............................................................. 9 Opening the Press-Latch Doors........................................................................................................... 9 Closing the Press-Latch Doors.............................................................................................................9 Removing the Battery............................................................................................................................9 Installing the Battery............................................................................................................................10 Removing the Hard Drive....................................................................................................................10 Installing the Hard Drive......................................................................................................................10 5 Working on Your Computer..............................................................................11 Using the Backlit Keyboard..................................................................................................................11 Turning the Keyboard Backlight On/Off or Adjusting Brightness................................................ 11 Changing the Keyboard Backlight Color...................................................................................... 12 Customizing the Backlit Keyboard in System Setup (BIOS)......................................................... 12 Function <Fn> Key Lock Features....................................................................................................... 12 Activating the Function (Fn) lock ..................................................................................................13 Turning Stealth Mode On/Off............................................................................................................. 13 Disabling Stealth Mode in the System Setup (BIOS).......................................................................... 14 Enabling and Disabling Wireless (WiFi) Feature..................................................................................14 Converting Between Notebook and Tablet Modes .......................................................................... 14 6 Quick Disconnect (QD) Connector................................................................. 16 Installing a QD connector...................................................................................................................16 Removing a QD connector.................................................................................................................16 7 Specifications.......................................................................................................17 Information para NOM (nicamente para Mxico)............................................................................ 21 8 Contacting Dell...................................................................................................22 3 Finding Information and Resources See the safety and regulatory documents that shipped with your computer and the regulatory compliance website at www.dell.com/regulatory_compliance for more information on:
1 Safety best practices Regulatory certification Ergonomics See www.dell.com for additional information on:
Warranty Terms and Conditions (U.S. only) End User License Agreement Additional information on your product is available at www.dell.com/support/manuals 4 System Overview 2 5 1. 3. 5. 7. 9. Display latch Privacy shutter Camera-status light Screen-rotate button Status lights 2. 4. 6. 8. 10. Microphones Camera (optional) Ambient light sensor Volume button Rotatable outdoor-readable display/
touchscreen 11. Flip-hinge 12. Smart Card reader 13. USB 3.0 connector and memory-card reader /
PCMCIA/ ExpressCard reader (optional) 14. Hard drive 15. Finger Print reader 17. WWAN configuration handle (Optional) 19. VGA connector 21. USB 2.0 connector Touchpad Stylus 23. 25. 27. 16. 18. 20. Power button Power connector Serial connector 22. Network connector 24. 26. Security cable slot Speaker Sealed thermal chamber 28. USB 3.0 connector with PowerShare 29. HDMI connector 31. Audio connector 33. Camera flash 35. Docking-device connector 37. Battery 30. 32. 34. 36. SIM card reader Rear camera Radio frequency pass-through connectors Battery latch WARNING: Do not block, push objects into, or allow dust to accumulate in the air vents. Do not store your Dell computer in a low-airflow environment, such as a closed briefcase, while it is running. Restricting the airflow can damage the computer or cause a fire. The computer turns on the fan when the computer gets hot. Fan noise is normal and does not indicate a problem with the fan or the computer. WARNING: EXPLOSION HAZARD-External Connections (Power Jack, HDMI Port, USB Ports, RJ45 Port, RS232 Port, Audio Port, Smart Card Reader, SD card Reader, Express Card Reader, PC-card Reader, SIM card Reader) are not to be used in a hazardous location. 6 3 Quick Setup WARNING: Before you begin any of the procedures in this section, read the safety information that shipped with your computer. For additional best practices information, see www.dell.com/
regulatory_compliance WARNING: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries. Using an incompatible cable or improperly connecting the cable to the power strip or electrical outlet may cause fire or equipment damage. CAUTION: When you disconnect the AC adapter cable from the computer, grasp the connector, not the cable itself, and pull firmly but gently to avoid damaging the cable. When you wrap the AC adapter cable, ensure that you follow the angle of the connector on the AC adapter to avoid damaging the cable. NOTE: Some devices may not be included if you did not order them. 1. Connect the AC adapter to the AC adapter connector on the computer and to the electrical outlet. Figure 1. AC Adapter 2. Connect the network cable (optional). Figure 2. Network Connector 3. Connect USB devices, such as a mouse or keyboard (optional). Figure 3. USB Connector 4. Connect IEEE 1394 devices, such as a 1394 hard drive (optional). 7 Figure 4. 1394 Connector 5. Open the computer display and press the power button to turn on the computer. Figure 5. Power Button NOTE: It is recommended that you turn on and shut down your computer at least once before you install any cards or connect the computer to a docking device or other external device, such as a printer. 8 4 Removing and Installing Components This section provides detailed information on how to remove or install the components from your computer. Opening the Press-Latch Doors There are six press-latch doors. Three on the back and two on the right side panel. An extra press-latch door is also present on the left side of the computer. To open the press-latch doors:
a. Left and right side press-latch doors: Slide the latch towards the back of the computer to lock and towards the front to unlock. b. Back press-latch door: Slide the latch to the right to lock and to the left to unlock. c. Press down the latch and pull the door in the direction away from the computer. Closing the Press-Latch Doors 1. Rotate the door back in position, towards the computer. 2. Engage the lock by sliding until the lock symbol is visible. Removing the Battery WARNING: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only with a compatible battery purchased from Dell. The battery is designed to work with your Dell computer. Do not use a battery from other computers with your computer. WARNING: Before removing or replacing the battery, turn off the computer, disconnect the AC adapter from the electrical outlet and the computer, disconnect the modem from the wall connector and computer, and remove any other external cables from the computer. WARNING: Not for use in hazardous locations. See installation instructions. WARNING: To prevent ignition in a hazardous atmosphere, batteries must only be changed or charged in an area known to be non-hazardous. 9 NOTE: The battery cannot be installed or removed with the optional accessory handle installed. The handle must be removed first (if present). 1. Unlock the battery release latch by pushing it upwards. 2. 3. Remove the battery from the computer. Slide the latch to the right to release the battery. Installing the Battery Slide the battery into its slot. 1. 2. Push the battery latch down to lock it. Removing the Hard Drive To open the hard drive latch door, push the latch button to the left (if locked). 1. 2. Open the hard-drive latch door by pushing the latch down. 3. Pull the hard drive outwards using the pull-tab and remove it from the computer. Installing the Hard Drive To secure the hard drive, push the hard drive into its compartment. 1. 2. Close and lock the hard-drive latch door. NOTE: Keep the hard drive pull-tab clear of the doors before closing. 10 5 Working on Your Computer This section provides information about Backlit Keyboard, Stealth Mode, Function keys and how to convert your computer to notebook and tablets modes. Using the Backlit Keyboard The Latitude rugged series comes equipped with a backlit keyboard that can be customized. The system comes with the following colors enabled:
Red 1. White 2. 3. Green 4. Blue Alternatively, the system can be configured with 2 additional custom colors in the System Setup (BIOS) Turning the Keyboard Backlight On/Off or Adjusting Brightness 1. Press <Fn> + < F10> to initialize the keyboard backlight switch. NOTE: <Fn> key is not needed if function key <Fn> lock is activated. NOTE: The first use of the above key combination turns on the backlight to its lowest setting. Additional pressing of the key combinations cycle the brightness settings through 25%, 50%,75%
and 100% . 2. Cycle through the key combination to either adjust the brightness or completely turn off the keyboard backlight. 11 Changing the Keyboard Backlight Color To change the keyboard backlight color:
Press <FN> + < C> keys to cycle through the available backlight colors. 1. 2. White, Red, Green and Blue are active by default; up to two custom colors can be added to the cycle in the System Setup (BIOS). Customizing the Backlit Keyboard in System Setup (BIOS) Power off the computer. 1. 2. Power on the computer and at the Dell logo, tap the <F2> key repeatedly to bring up the system 3. 4. setup menu. Expand and open the System Configuration menu. Select RGB Keyboard Backlight. You can enable/disable the standard colors (White, Red, Green and Blue). 5. To set a custom RGB value, use the input boxes on the right side of the screen. 6. Click Apply changes and click Exit close the system setup. Function <Fn> Key Lock Features NOTE: The keyboard has Function key <Fn> lock capability. When activated, the secondary functions on the top row of keys become default and will not require use of the <Fn> key. 12 Figure 6. <Fn> key callouts 1. 2. 3.
<Fn> Lock Key Affected <Fn> keys
<Fn> Key NOTE: <Fn> Lock affects only the above keys . Secondary functions will not require the <Fn> key to be pressed while enabled. Activating the Function (Fn) lock 1. Press the <Fn> + <Esc> keys NOTE: Other secondary functions on keys below the top row are not affected and requires the use of the <Fn> key. 2. Press the <Fn> + <Esc> keys again to deactivate the function lock feature. The function keys return to their default actions. Turning Stealth Mode On/Off 1. Press the <Fn> + <F7> key combination (<Fn> key not needed if Fn lock is activated) to turn on stealth mode. NOTE: Stealth mode is a secondary function of the <F7> key. The key can be used to perform other functions on the computer when not used with the <Fn> key to activate stealth mode. 2. All the lights and sounds are turned off. 3. Press the <Fn> + <F7> key combination again to turn off the stealth mode. 13 Disabling Stealth Mode in the System Setup (BIOS) Power off the computer. 1. 2. Power on the computer and at the Dell logo, tap the <F2> key repeatedly to bring up the System Setup menu. Expand and open the System Configuration menu. Select Stealth Mode Control. 3. 4. NOTE: Stealth mode is enabled by default. Select Disable to disable the stealth mode. 5. 6. When complete, Apply changes and Exit the BIOS or system setup. Enabling and Disabling Wireless (WiFi) Feature Press the <Fn> + <PrtScr> keys to enable wireless networking. 1. 2. Press the<Fn> + < PrtScr> keys again to disable wireless networking. Converting Between Notebook and Tablet Modes To undock the computer, press the display latch. 1. 2. Open the display lid by lifting it upwards. 14 3. To change to tablet mode:
a. Gently push the display panel in the direction indicated to pop the display from the display frame. b. Rotate the display by 180degrees until it clicks back into place. 4. Close the display lid. 5. The computer is now converted for use in the tablet mode. Repeat the steps, flipping the display in the opposite direction, to bring the computer back to notebook mode. 15 Quick Disconnect (QD) Connector Latitude fully rugged products come equipped with receptacles for QD (Quick-Disconnect) connectors at the corners. These receptacles allow the connection of optional accessories such as shoulder straps. 6 Installing a QD connector 1. Align the QD connector to the receptacle on the corner of the computer. 2. Insert the connector into the receptacle while holding the button pressed. 3. Press and hold the button on top of the QD connector. 4. Release the button after the connector is seated in the receptacle to secure it. Removing a QD connector Press and hold the button on top of the QD connector. 1. 2. Pull the connector out of the receptacle while holding the button pressed. 16 Specifications NOTE: Offerings may vary by region. Table 1. System Information Feature DRAM bus width Flash EPROM PCIe 2.0 bus Table 2. Processor Feature Types L3 cache External bus frequency Table 3. Memory Feature Memory connector Memory capacity Memory type Minimum memory Maximum memory Table 4. Audio Feature Type Controller Specification 64 bit SPI 32 Mbits 100MHz Specification Intel Core i3/i5/i7 series up to 4MB 1600MHz Specification two SODIMM slots 2GB, 4GB, or 8GB DDR3L SDRAM 1600 Mhz 4GB 16GB Specification four-channel high definition audio Realtek ALC3226 Stereo conversion 24 bit (analog-to-digital and digital-to-analog) Interface:
Internal External HD audio microphone-in/stereo headphones/external speakers connector 7 17 Feature Speakers Specification one mono speaker Internal speaker amplifier 2 W (RMS) Volume controls Volume Up/Volume Down buttons CAUTION: Adjustment of volume control, as well as the equalizer in the operating system and/or equalizer software, to other settings than the center position may increase the earphones and/or headphones output and cause hearing damage or loss. Table 5. Video Feature Type Controller (UMA) Intel Core i3/ i5 series Intel Core i7 Table 6. Communications Feature Network adapter Wireless Table 7. Ports and Connectors Feature Audio Video Specification integrated on system board Intel HD Graphics 4400 Intel HD Graphics 5000 Specification 10/100/1000 Mb/s Ethernet (RJ-45) WLAN with Bluetooth 4.0 enabled WWAN Specification one microphone/stereo headphone/speakers connector one 15-pin VGA connector one 19-pin HDMI connector Network adapter one RJ-45 connector USB 2.0 USB 3.0 Memory card reader Serial 18 one 4pin USB 2.0compliant connector one 4-pin USB 3.0-compliant connector with PowerShare one 4-pin USB 3.0-compliant connector (not present on configurations with ExpressCard or PCMCIA reader) one 8-in-1 memory card reader (not present on configurations with Express Card or PCMCIA reader) one optional ExpressCard Reader or optional PCMCIA Reader (choosing either replaces one USB 3.0 port and 8-
in-1 memory card reader) one DB9 pin serial connector Feature Docking port SIM Slot Table 8. Display Feature Type Size Dimensions:
Height Width Diagonal Active area (X/Y) Maximum resolution Operating angle Refresh rate Minimum Viewing angles:
Horizontal Vertical Pixel pitch Table 9. Keyboard Feature Number of keys Layout Table 10. Touchpad Feature Active Area:
X-axis Specification one one micro-SIM slot with security feature Specification WLED display 11.6 inches viewable 158.5 mm (6.24 inches) 268.0 mm (10.59 inches) 29.38 mm (1.15 inches) 256.12 mm 144 mm 1366 x 768 pixels 0 (closed) to 180 60 Hz
+/- 70 minimum for HD
+/-70 minimum for HD 0.1875 mm Specification 83 keys: US English, Thai, French-Canadian, Korean, Russian, Hebrew, English-International 84 keys: UK English, French Canadian Quebec, German, French, Spanish (Latin America), Nordic, Arabic, Canada Bilingual 85 keys: Brazilian Portuguese 87 keys: Japanese QWERTY/AZERTY/Kanji Specification 91 mm (3.58 inches) 19 Feature Y-axis Table 11. Battery Feature Type Dimensions:
Height Width Depth Weight Voltage Temperature range:
Operating Specification 51 mm (2.00 inches) Specification 4-cell "smart" lithium ion 16.5 mm (0.65 inches) 215 mm (8.46 inches) 72.6 mm (2.85 inches) 318 g 14.8 VDC Charging : 0 C to 60 C (32 F to 140 F) Discharging: 0 C to 70 C (32 F to 158 F) Non-Operating 40 C to 85 C (40 F to 185 F) NOTE: The battery pack is capable of safely withstanding the above storage temperatures with 100 percent charge. NOTE: The battery pack is also capable of withstanding storage temperatures from 20 C to +60 C with no degradation in its performance. Coin-cell battery 3 V CR2032 lithium-ion coin cell Table 12. AC Adapter Feature Type Input voltage Input current (maximum) Input frequency Output power Output current Rated output voltage Temperature range:
Operating Non-Operating 20 Specification 65 W 100240 VAC 1.7 A 5060 Hz 65 W 3.34 A (continuous) 19.5 +/ 1.0 VDC 0 C to 40 C (32 F to 104 F) 40 C to 70 C (40 F to 158 F) Table 13. Physical Feature Height Width Depth Weight Table 14. Environmental Feature Temperature:
Operating Storage Relative humidity (maximum):
Operating Storage Altitude (maximum):
Operating Non-Operating Specification 39.4 mm (1.55 inches) 311 mm (12.24 inches) 229 mm (9.01 inches) 5.9 lbs (2.71 kg) Specification 29 C to 63 C (20 F to 145 F) 51 C to 71 C (60 F to 160 F) 10 % to 90 % (non condensing) 0 % to 95 % (non condensing) 15.24 m to 4572 (50 ft to 15,000 ft ft) 15.24 m to 9144 m (50 ft to 30,000 ft) Airborne contaminant level G1 as defined by ISA-71.041985 Information para NOM (nicamente para Mxico) The following information is provided on the device described in this document in compliance with the requirements of the official Mexican standards (NOM). Voltaje de alimentacin 100 VAC 240 VAC Frecuencia Consumo elctrico Voltaje de salida Intensidad de salida 50 Hz 60 Hz 1.7 A 19,50 V de CC 3,34 A 21 8 Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues:
1. Go to dell.com/support. 2. 3. Verify your country or region in the Choose a Country/Region drop-down list at the bottom of the Select your support category. page. Select the appropriate service or support link based on your need. 4. 22
| 1 2 3 | TempConfidential 4112880 AirPrime Hardware Integration Guide v2 | Users Manual | 257.50 KiB | October 02 2013 |
AirPrime EM7355 Hardware Integration Guide 4112880 Rev 2 Distribution under NDA only Contents subject to change Important Notice Safety and Hazards Limitation of Liability Preface Due to the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Sierra Wireless modem are used in a normal manner with a well-constructed network, the Sierra Wireless modem should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Sierra Wireless accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Sierra Wireless modem, or for failure of the Sierra Wireless modem to transmit or receive such data. Do not operate the Sierra Wireless modem in areas where blasting is in progress, where explosive atmospheres may be present, near medical equipment, near life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the Sierra Wireless modem MUST BE POWERED OFF. The Sierra Wireless modem can transmit signals that could interfere with this equipment. Do not operate the Sierra Wireless modem in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the Sierra Wireless modem MUST BE POWERED OFF. When operating, the Sierra Wireless modem can transmit signals that could interfere with various onboard systems. Note: Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open. Sierra Wireless modems may be used at this time. The driver or operator of any vehicle should not operate the Sierra Wireless modem while in control of a vehicle. Doing so will detract from the driver or operator's control and operation of that vehicle. In some states and provinces, operating such communications devices while in control of a vehicle is an offence. The information in this manual is subject to change without notice and does not represent a commitment on the part of Sierra Wireless. SIERRA WIRELESS AND ITS AFFILIATES SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUE OR ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE ANY SIERRA WIRELESS PRODUCT, EVEN IF SIERRA WIRELESS AND/OR ITS AFFILIATES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR THEY ARE FORESEEABLE OR FOR CLAIMS BY ANY THIRD PARTY. Notwithstanding the foregoing, in no event shall Sierra Wireless and/or its affiliates aggregate liability arising under or in connection with the Sierra Wireless product, regardless of the number of events, occurrences, or claims giving rise to liability, be in excess of the price paid by the purchaser for the Sierra Wireless product. Rev 2 Feb.13 Proprietary and Confidential - Contents subject to change 3 Hardware Integration Guide Patents Copyright Trademarks Contact Information This product may contain technology developed by or for Sierra Wireless Inc. This product includes technology licensed from QUALCOMM. This product is manufactured or sold by Sierra Wireless Inc. or its affiliates under one or more patents licensed from InterDigital Group and MMP Portfolio Licensing. 2013 Sierra Wireless. All rights reserved. AirCard is a registered trademark of Sierra Wireless. Sierra Wireless, AirPrime, Watcher, and the Sierra Wireless logo are trademarks of Sierra Wireless. Windows is a registered trademark of Microsoft Corporation. QUALCOMM is a registered trademark of QUALCOMM Incorporated. Used under license. Other trademarks are the property of their respective owners. Sales Desk:
Post:
1-604-232-1488 8:00 AM to 5:00 PM Pacific Time sales@sierrawireless.com Phone:
Hours:
E-mail:
Sierra Wireless 13811 Wireless Way Richmond, BC Canada V6V 3A4 Technical support:
RMA support:
Fax:
Web:
support@sierrawireless.com repairs@sierrawireless.com 1-604-231-1109 www.sierrawireless.com Consult our website for up-to-date product descriptions, documentation, application notes, firmware upgrades, troubleshooting tips, and press releases:
Revision History www.sierrawireless.com Revision number Release date Changes 1 2 4 December 2012 FCC / IC certification February 2013 Updated CDMA frequency range for BC10 Proprietary and Confidential - Contents subject to change 4112880 Contents Introduction . 7 Accessories . 7 Required connectors . 7 Power . 9 Power supply . 9 Module power states . 9 RF Specifications . 11 RF connections . 12 Shielding . 12 Antenna and cabling . 13 Ground connection. 14 Interference and sensitivity. 14 Interference from other wireless devices . 14 Host-generated RF interference . 14 Device-generated RF interference . 15 Methods to mitigate decreased Rx performance . 15 Radiated Spurious Emissions (RSE) . 15 Radiated sensitivity measurement . 16 Regulatory Compliance and Industry Certifications . 17 Important notice . 17 Safety and hazards . 17 Important compliance information for North American users . 18 Acronyms . 21 Index . 27 Rev 2 Feb.13 Proprietary and Confidential - Contents subject to change 5 Hardware Integration Guide 6 Proprietary and Confidential - Contents subject to change 4112880 1: Introduction 1 The Sierra Wireless EM7355 Embedded Module is an M.2 modem that provides LTE, DC-HSPA+, HSPA+, HSDPA, HSUPA, WCDMA, GSM, GPRS, EDGE, CDMA, and GNSS connectivity for notebook, ultrabook, and tablet computers over several radio frequency bands. The device also supports 2G / 3G roaming. Accessories A hardware development kit is available for AirPrime M.2 modules. The kit contains hardware components for evaluating and developing with the module, including:
Other accessories Development board Cables Antennas For over-the-air LTE testing, ensure that suitable antennas are used. Required connectors Table 1-1 describes the connectors used to integrate the EM7355 Embedded Module into your host device. Table 1-1: Required host-module connectors Connector type Description RF cables
Mate with M.2-spec connectors
Three connector jacks EDGE (67 pin)
Slot B compatible Per the M.2 standard (PCI Express NGFF
(M.2) Electromechanical Specification Revision 0.7), a generic 75 pin position EDGE connector on the motherboard uses a mechanical key to mate with the 67 pin notched module connector.
Manufacturers include LOTES (part #APCI0018-P001A01), Kyocera, JAE, Tyco, and Longwell. SIM
Industry-standard connector. Rev 2 Feb.13 Proprietary and Confidential - Contents subject to change 7 Hardware Integration Guide 8 Proprietary and Confidential - Contents subject to change 4112880 2: Power 2 Power supply The host provides power to the EM7355 through multiple power and ground pins. The host must provide safe and continuous power (via battery or a regulated power supply) at all times; the module does not have an independent power supply, or protection circuits to guard against electrical issues. For detailed pinout and voltage / current requirements of this module, see the AirPrime EM7355 Product Technical Specification &
Customer Design Guidelines. Module power states The module has five power states, as described in Table 2-1. Table 2-1: Module power states State Details Normal
(Default state) Low power
(Airplane mode)
Module is active Default state. Occurs when VCC is first applied, Full_Card_Power_Off# is deasserted (pulled high), and W_DISABLE#1 is deasserted Module is capable of placing / receiving calls, or establishing data connections on the wireless network Current consumption is affected by several factors, including:
Radio band being used
Transmit power
Receive gain settings
Data rate Module is active Module enters this state:
Under host interface control:
Host issues AT+CFUN=0 ([1] AT Command Set for User Equipment (UE)
(Release 6) (Doc# 3GPP TS 27.007))), or Host asserts W_DISABLE#1, after AT!PCOFFEN=0 has been issued.
Automatically, when critical temperature or voltage trigger limits have been reached)) d e r e w o p s i e l u d o M d e r e w o p s i t s o H e v i t c a e c a f r e t n i B S U d e l b a n e F R Rev 2 Feb.13 Proprietary and Confidential - Contents subject to change 9 Hardware Integration Guide Table 2-1: Module power states (Continued) State Details Sleep Off
Normal state of module between calls or data connections Module cycles between wake (polling the network) and sleep, at network provider-
determined interval. Host keeps module powered off by asserting Full_Card_Power_Off# (signal pulled low or left floating) Module draws minimal current d e r e w o p s i e l u d o M d e r e w o p s i t s o H e v i t c a e c a f r e t n i B S U d e l b a n e F R Disconnected Host power source is disconnected from the module and all voltages associated with the module are at 0 V. 10 Proprietary and Confidential - Contents subject to change 4112880 3: RF Specifications 3 The EM7355 operates on the frequency bands listed below. Table 3-1: LTE frequency band support Band Frequencies Band 2 Band 4 (AWS) Band 5 Band 13 Band 17 Band 25 Tx: 18501910 MHz Rx: 19301990 MHz Tx: 17101755 MHz Rx: 21102155 MHz Tx: 824849 MHz Rx: 869894 MHz Tx: 777787 MHz Rx: 746756 MHz Tx: 704716 MHz Rx: 734746 MHz Tx: 18501915 MHz Rx: 19301995 MHz Table 3-2: WCDMA frequency band support1 Band Frequencies Band 1 WCDMA 2100 Band 2 WCDMA 1900 Tx: 19201980 MHz Rx: 21102170 MHz Tx: 18501910 MHz Rx: 19301990 MHz Band 4 AWS 1700/2100 Tx: 17101755 MHz Rx: 21102155 MHz Band 5 WCDMA 850 Band 8 WCDMA 900 Tx: 824849 MHz Rx: 869894 MHz Tx: 880915 MHz Rx: 925960 MHz 1. WCDMA channel spacing is 5 MHz, but this can be adjusted to optimize performance in a particular deployment scenario. Table 3-3: GSM frequency band support Band Frequencies GSM 850 EGSM 900 Tx: 824849 MHz Rx: 869894 MHz Tx: 880915 MHz Rx: 925960 MHz Rev 2 Feb.13 Proprietary and Confidential - Contents subject to change 11 Hardware Integration Guide Table 3-3: GSM frequency band support (Continued) Band Frequencies GSM 1800 GSM 1900 Tx: 17101785 MHz Rx: 18051880 MHz Tx: 18501910 MHz Rx: 19301990 MHz Table 3-4: CDMA frequency band support Band Frequencies Band Class 0
(Cellular 800 MHz) Tx: 824849 MHz Rx: 869894 MHz Band Class 1
(PCS) Tx: 18501910 MHz Rx: 19301990 MHz Band Class 10
(Secondary 800 MHz)1 Tx: 817824 MHz Rx: 862869 MHz 1. BC10 subclasses 2 and 3 (system designator C and D) are sup-
ported Table 3-5: GNSS frequency band support Band Frequencies Narrow-band GPS Rx: 1575.42 MHz Wide-band GPS + GLONASS Rx: 15651606 MHz RF connections When attaching antennas to the module:
Use any of the following (or compatible) 2x2 mm RF receptacle connectors to attach antennas to the modules connection points
Match coaxial connections between the module and the antenna to 50 .
Minimize RF cable losses to the antenna; the recommended maximum cable
loss for antenna cabling is 0.5 dB. To ensure best thermal performance, if possible use the mounting hole to attach (ground) the device to a metal chassis. Note: If the antenna connection is shorted or open, the modem will not sustain permanent damage. Shielding The module is fully shielded to protect against EMI and must not be removed. 12 Proprietary and Confidential - Contents subject to change 4112880 RF Specifications Antenna and cabling When selecting the antenna and cable, it is critical to RF performance to match antenna gain and cable loss. Choosing the correct antenna and cabling When matching antennas and cabling:
The antenna (and associated circuitry) should have a nominal impedance of 50 with a return loss of better than 10 dB across each frequency band of operation. The system gain value affects both radiated power and regulatory (FCC, IC, CE, etc.) test results. Designing custom antennas Consider the following points when designing custom antennas:
A skilled RF engineer should do the development to ensure that the RF performance is maintained. If both UMTS and CDMA modules will be installed in the same platform, you may want to develop separate antennas for maximum performance. Determining the antennas location When deciding where to put the antennas:
Antenna location may affect RF performance. Although the module is shielded to prevent interference in most applications, the placement of the antenna is still very important if the host device is insufficiently shielded, high levels of broadband or spurious noise can degrade the modules perfor-
mance. Connecting cables between the module and the antenna must have 50 impedance. If the impedance of the module is mismatched, RF performance is reduced significantly. Antenna cables should be routed, if possible, away from noise sources
(switching power supplies, LCD assemblies, etc.). If the cables are near the noise sources, the noise may be coupled into the RF cable and into the antenna. Disabling the diversity antenna
For LTE / UMTS bands, use the AT command !RXDEN=0 to disable receive diversity or !RXDEN=1 to enable receive diversity. For CDMA bands, use the AT command !DIVERSITY to enable or disable receive diversity.
Note: A diversity antenna is used to improve connection quality and reliability through redundancy. Because two antennas may experience difference interference effects (signal distortion, delay, etc.), when one antenna receives a degraded signal, the other may not be similarly affected. Rev 2 Feb.13 Proprietary and Confidential - Contents subject to change 13 Hardware Integration Guide Ground connection When connecting the module to system ground:
Prevent noise leakage by establishing a very good ground connection to the module through the host connector. Connect to system ground using the modules mounting hole.
Minimize ground noise leakage into the RF. Depending on the host board design, noise could potentially be coupled to the module from the host board. This is mainly an issue for host designs that have signals traveling along the length of the module, or circuitry operating at both ends of the module interconnects. Interference and sensitivity Several interference sources can affect the modules RF performance
(RF desense). Common sources include power supply noise and device-
generated RF. RF desense can be addressed through a combination of mitigation techniques
(Methods to mitigate decreased Rx performance on page 15) and radiated sensitivity measurement (Radiated sensitivity measurement on page 16). Note: The EM7355 is based on ZIF (Zero Intermediate Frequency) technologies. When performing EMC (Electromagnetic Compatibility) tests, there are no IF (Intermediate Frequency) components from the module to consider. Interference from other wireless devices Wireless devices operating inside the host device can cause interference that affects the module. To determine the most suitable locations for antennas on your host device, evaluate each wireless devices radio system, considering the following:
Any harmonics, sub-harmonics, or cross-products of signals generated by wireless devices that fall in the modules Rx range may cause spurious response, resulting in decreased Rx performance. The Tx power and corresponding broadband noise of other wireless devices may overload or increase the noise floor of the modules receiver, resulting in Rx desense.
The severity of this interference depends on the closeness of the other antennas to the modules antenna. To determine suitable locations for each wireless devices antenna, thoroughly evaluate your host devices design. Host-generated RF interference All electronic computing devices generate RF interference that can negatively affect the receive sensitivity of the module. 14 Proprietary and Confidential - Contents subject to change 4112880 RF Specifications Display panel and display drivers Switching-mode power supplies Proximity of host electronics to the antenna in wireless devices can contribute to decreased Rx performance. Components that are most likely to cause this include:
Microprocessor and memory
Device-generated RF interference The module can cause interference with other devices. Wireless devices such as AirPrime embedded modules transmit in bursts (pulse transients) for set durations
(RF burst frequencies). Hearing aids and speakers convert these burst frequencies into audible frequencies, resulting in audible noise. Methods to mitigate decreased Rx performance It is important to investigate sources of localized interference early in the design cycle. To reduce the effect of device-generated RF on Rx performance:
Put the antenna as far as possible from sources of interference. The drawback is that the module may be less convenient to use. Shield the host device. The module itself is well shielded to avoid external interference. However, the antenna cannot be shielded for obvious reasons. In most instances, it is necessary to employ shielding on the components of the host device (such as the main processor and parallel bus) that have the highest RF emissions. Filter out unwanted high-order harmonic energy by using discrete filtering on low frequency lines. Form shielding layers around high-speed clock traces by using multi-layer PCBs. Route antenna cables away from noise sources.
Radiated Spurious Emissions (RSE) When designing an antenna for use with AirPrime embedded modules, the host device with an AirPrime embedded module must satisfy the radiated spurious emission (RSE) test cases described in:
(CDMA) Refer to CDMA standards for receive-only mode, and local regulatory bodies for transmit mode (transmitter is operating). CE/ETSI EN 301 908 (WCDMA), test numbers 5.3.1 (Radiated Emissions
(UE)) CE/ETSI EN 301 511 (GSM), test 5.2.16 (Radiated Spurious Emissions - MS allocated a channel). This test uses the procedure and requirement outlined in 3GPP 51.010 (GSM) section 12.2.1 of the same test name.
Note that antenna impedance affects radiated emissions, which must be compared against the conducted 50-ohm emissions baseline. (AirPrime embedded modules meet the 50-ohm conducted emissions requirement.) Rev 2 Feb.13 Proprietary and Confidential - Contents subject to change 15 Hardware Integration Guide Note: GSM spurious emissions are most likely to have RSE issues, but in general, RSE requirements must be met on all models with user-designed antennas. Radiated sensitivity measurement A wireless host device contains many noise sources that contribute to a reduction in Rx performance. To determine the extent of any receiver performance desensitization due to self-
generated noise in the host device, over-the-air (OTA) or radiated testing is required. This testing can be performed by Sierra Wireless or you can use your own OTA test chamber for in-house testing. 16 Proprietary and Confidential - Contents subject to change 4112880 4: Regulatory Compliance and Industry Certifications 4 This module is designed to meet, and upon commercial release, will meet the requirements of the following regulatory bodies and regulations, where applicable:
Federal Communications Commission (FCC) of the United States The Certification and Engineering Bureau of Industry Canada
(IC) The National Communications Commission (NCC) of Taiwan, Republic of China
Upon commercial release, the following industry certifications will have been obtained, where applicable:
GCF-CC (For Verizon 2G / 3G approval)
PTCRB CDG2 Additional certifications may be obtained upon customer request contact your Sierra Wireless account representative for details. Additional testing and certification may be required for the end product with an embedded EM7355 modem and are the responsibility of the OEM. Sierra Wireless offers professional services-based assistance to OEMs with the testing and certification process, if required. Important notice Because of the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Sierra Wireless modem are used in a normal manner with a well-
constructed network, the Sierra Wireless modem should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Sierra Wireless and its affiliates accept no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Sierra Wireless modem, or for failure of the Sierra Wireless modem to transmit or receive such data. Safety and hazards Do not operate your EM7355 modem:
In areas where blasting is in progress Rev 2 Feb.13 Proprietary and Confidential - Contents subject to change 17 Hardware Integration Guide
Where explosive atmospheres may be present including refuelling points, fuel
depots, and chemical plants Near medical equipment, life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the EM7355 modem MUST BE POWERED OFF. Otherwise, the EM7355 modem can transmit signals that could interfere with this equipment. In an aircraft, the EM7355 modem MUST BE POWERED OFF. Otherwise, the EM7355 modem can transmit signals that could interfere with various onboard systems and may be dangerous to the operation of the aircraft or disrupt the cellular network. Use of a cellular phone in an aircraft is illegal in some jurisdictions. Failure to observe this instruction may lead to suspension or denial of cellular telephone services to the offender, or legal action or both. Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open. The EM7355 modem may be used normally at this time. Important compliance information for North American users Note: Details are preliminary and subject to change. The EM7355 modem has been granted modular approval for mobile applications. Integrators may use the EM7355 modem in their final products without additional FCC / IC (Industry Canada) certification if they meet the following conditions. Otherwise, additional FCC / IC approvals must be obtained. 1. At least 20 cm separation distance between the antenna and the users body must be maintained at all times. 2. To comply with FCC / IC regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed:
6.5 dBi in Cellular band 3.0 dBi in PCS band 3.0 dBi in LTE Band 2 6.0 dBi in LTE Band 4 6.5 dBi in LTE Band 5 9.0 dBi in LTE Band 13 (Note: LTE Band 13 is not permitted in Canada.) 9.0 dBi in LTE Band 17 (Note: LTE Band 17 is not permitted in Canada.) 3.0 dBi in LTE Band 25 3. The EM7355 modem may transmit simultaneously with other collocated radio transmitters within a host device, provided the following conditions are met:
Each collocated radio transmitter has been certfied by FCC / IC for mobile application. At least 20 cm separation distance between the antennas of the collocated transmitters and the users body must be maintained at all times. 18 Proprietary and Confidential - Contents subject to change 4112880 Regulatory Compliance and Industry Certifications The output power and antenna gain must not exceed the limits and configu-
rations stipulated in the following table. Device Technology Band Frequency
(MHz) EM7355 Embedded Module LTE UMTS 2 4 5 13 17 25 2 4 5 GSM 850 18501910 17101755 824849 777787 704716 18501915 18501910 17101755 824849 824849 CDMA Collocated transmitters1 WLAN WiMAX BT 1900 18501910 BC0 BC1 824849 18501910 BC10 817824 24002500 51505850 23002400 25002700 33003800 24002500 Maximum conducted power
(dBm) 24 24 24 24 24 24 24 24 24 33 30 25 25 25 29 29 29 29 29 15 Maximum antenna gain
(dBi) 3 6 3 6 6 3 3 6 3 3 3 3 3 3 5.0 5.0 5.0 5.0 5.0 5.0 1. Valid collocated transmitter combinations: WLAN+BT; WiMAX+BT.
(WLAN+WiMAX+BT is not permitted.) 4. A label must be affixed to the outside of the end product into which the EM7355 modem is incorporated, with a statement similar to the following:
This device contains FCC ID: N7NEM7355 Contains transmitter module IC: 2417C-EM7355 where 2417C-EM7355 is the modules certification number. 5. A user manual with the end product must clearly indicate the operating requirements and conditions that must be observed to ensure compliance with current FCC / IC RF exposure guidelines. Rev 2 Feb.13 Proprietary and Confidential - Contents subject to change 19 Hardware Integration Guide The end product with an embedded EM7355 modem may also need to pass the FCC Part 15 unintentional emission testing requirements and be properly authorized per FCC Part 15. Note: If this module is intended for use in a portable device, you are responsible for separate approval to satisfy the SAR requirements of FCC Part 2.1093 and IC RSS-102. 20 Proprietary and Confidential - Contents subject to change 4112880 5: Acronyms 5 Table 5-1: Acronyms and definitions Acronym or term Definition 1xEV-DO Single Carrier (1X) EVolution Data Only. A high-speed standard for cellular packet data communications. Supports Internet connections with data rates up to 3.1 Mbps (downlink from the network) and 1.8 Mbps (uplink to the network). Average data rates are roughly: for Rev. A: 600 1300 kbps (downlink from the network) and 300 400 kbps (uplink to the network); for Rev. 0: 400 700 kbps (downlink from the network) and 40 80 kbps (uplink to the network). Actual speed depends on the network conditions. Compare to 1X. 1X 3GPP 8PSK AGC A-GPS A-GNSS API BER BLER bluetooth CAIT CDG CDMA CQI COM CS CW Single Carrier (1X) Radio Transmission Technology. A high-speed standard for cellular packet data communications. Supports Internet connections with data rates up to 153 kbps (simultaneously in each directiondownlink and uplink). Actual speed depends on the network conditions. Compare to 1xEV-DO. 3rd Generation Partnership Project Octagonal Phase Shift Keying Automatic Gain Control Assisted GPS Assisted GNSS Application Programming Interface Bit Error Rate A measure of receive sensitivity Block Error Rate Wireless protocol for data exchange over short distances CDMA Air Interface Tool CDMA Development Groupa consortium of companies that develop and promote the products and services for CDMA wireless systems. Code Division Multiple Access. A wideband spread spectrum technique used in digital cellular, personal communications services, and other wireless networks. Wide channels (1.25 MHz) are obtained through spread spectrum transmissions, thus allowing many active users to share the same channel. Each user is assigned a unique digital code, which differentiates the individual conversations on the same channel. Channel Quality Indication Communication port Circuit-switched Continuous waveform Rev 2 Feb.13 Proprietary and Confidential - Contents subject to change 21 Hardware Integration Guide Table 5-1: Acronyms and definitions (Continued) Acronym or term Definition dB Decibel = 10 x log10 (P1 / P2) P1 is calculated power; P2 is reference power Decibel = 20 x log10 (V1 / V2) V1 is calculated voltage, V2 is reference voltage dBm DC-HSPA+
DCS DL DUN DRX DSM DUT EDGE eHRPD EIRP EMC EMI ERP ESD FCC FDMA FER firmware FOTA FOV A logarithmic (base 10) measure of relative power (dB for decibels); relative to milliwatts (m). A dBm value will be 30 units (1000 times) larger (less negative) than a dBW value, because of the difference in scale (milliwatts vs. watts). Dual Carrier HSPA+
Digital Cellular System A cellular communication infrastructure that uses the 1.8 GHz radio spectrum. Downlink (network to mobile) Dial-Up Networking Discontinuous Reception Distributed Shared Memory Device Under Test Enhanced Data rates for GSM Evolution Evolved High Rate Packet Data Enhances traditional 1xEV-DO to enable LTE to CDMA handover. Effective (or Equivalent) Isotropic Radiated Power Electromagnetic Compatibility Electromagnetic Interference Effective Radiated Power Electrostatic Discharge Federal Communications Commission The U.S. federal agency that is responsible for interstate and foreign communications. The FCC regulates commercial and private radio spectrum management, sets rates for communications services, determines standards for equipment, and controls broadcast licensing. Consult www.fcc.gov. Frequency Division Multiple Access Frame Error Rate A measure of receive sensitivity. Software stored in ROM or EEPROM; essential programs that remain even when the system is turned off. Firmware is easier to change than hardware but more permanent than software stored on disk. Firmware Over The Air Technology used to download firmware upgrades directly from the service provider, over the air. Field Of View 22 Proprietary and Confidential - Contents subject to change 4112880 Acronyms Table 5-1: Acronyms and definitions (Continued) Acronym or term Definition FSN Factory Serial NumberA unique serial number assigned to the mini card during manufacturing. GCF GLONASS Global Certification Forum Global Navigation Satellite System A Russian system that uses a series of 24 satellites in middle circular orbit to provide navigational data. GMSK GNSS GPRS GPS GSM Host HSDPA HSPA+
HSUPA Hz IC IF IMEI IMS inrush current inter-RAT IOT IS IS-2000 IS-95 LED LHCP LNA Gaussian Minimum Shift Keying modulation Global Navigation Satellite Systems (GPS plus GLONASS) General Packet Radio Service Global Positioning System An American system that uses a series of 24 satellites in middle circular orbit to provide navigational data. Global System for Mobile Communications The device into which an embedded module is integrated High Speed Downlink Packet Access Enhanced HSPA, as defined in 3GPP Release 7 and beyond High Speed Uplink Packet Access Hertz = 1 cycle / second Industry Canada Intermediate Frequency International Mobile Equipment Identity IP Multimedia Subsystem Architectural framework for delivering IP multimedia services. Peak current drawn when a device is connected or powered on Radio Access Technology Interoperability Testing Interim Standard. After receiving industry consensus, the TIA forwards the standard to ANSI for approval. 3G radio standards for voice and data (CDMA only) 2G radio standards targeted for voice (cdmaONE) Light Emitting Diode. A semiconductor diode that emits visible or infrared light. Left-Hand Circular Polarized Low Noise Amplifier Rev 2 Feb.13 Proprietary and Confidential - Contents subject to change 23 Hardware Integration Guide Table 5-1: Acronyms and definitions (Continued) Acronym or term Definition LPM LPT LTE Low Power Mode Line Print Terminal Long Term Evolutiona high-performance air interface for cellular mobile communication systems. MCS MHz MEID MIMO NAS / AS NC NIC NMEA OEM OFDMA OMA DM OTA PA packet PCB PCS PDN PMI PSS PST PTCRB QAM QMI Modulation and Coding Scheme Megahertz = 10e6 Hz Mobile Equipment Identifier The unique second-generation serial number assigned to the minicard for use on the wireless network. Multiple Input Multiple Outputwireless antenna technology that uses multiple antennas at both transmitter and receiver side. This improves performance. Network Access Server No Connect Network Interface Card National Marine Electronics Association Original Equipment Manufacturera company that manufactures a product and sells it to a reseller. Orthogonal Frequency Division Multiple Access Open Mobile Alliance Device Management A device management protocol. Over the air (or radiated through the antenna) Power Amplifier A short, fixed-length block of data, including a header, that is transmitted as a unit in a communications network. Printed Circuit Board Personal Communication System A cellular communication infrastructure that uses the 1.9 GHz radio spectrum. Packet Data Network Pre-coding Matrix Index Primary synchronisation signal Product Support Tools PCS Type Certification Review Board Quadrature Amplitude Modulation. This form of modulation uses amplitude, frequency, and phase to transfer data on the carrier wave. Qualcomm MSM/Modem Interface 24 Proprietary and Confidential - Contents subject to change 4112880 Table 5-1: Acronyms and definitions (Continued) Acronyms Quality of Service Acronym or term Definition QOS QPSK QPST RAT RF RI roaming Ring Indicator Radio Frequency Quadrature Phase-Shift Keying Qualcomm Product Support Tools Radio Access Technology A cellular subscriber is in an area where service is obtained from a cellular service provider that is not the subscribers provider. Radiated Spurious Emissions Received Signal Strength Indication RSE RSSI SDK SED Sensitivity
(Audio) Sensitivity (RF) Measure of lowest power signal at the receiver input that can provide a prescribed Measure of lowest power signal that the receiver can measure. Software Development Kit Smart Error Detection BER / BLER / SNR value at the receiver output. SG SIB SIM SIMO SISO SKU SMS S/N SNR SOF SSS An LTE signaling interface for SMS (SMS over SGs) System Information Block Subscriber Identity Module. Also referred to as USIM or UICC. Single Input Multiple Outputsmart antenna technology that uses a single antenna at the transmitter side and multiple antennas at the receiver side. This improves performance and security. Single Input Single Outputantenna technology that uses a single antenna at both the transmitter side and the receiver side. Stock Keeping Unitidentifies an inventory item: a unique code, consisting of numbers or letters and numbers, assigned to a product by a retailer for purposes of identification and inventory control. Short Message Service. A feature that allows users of a wireless device on a wireless network to receive or transmit short electronic alphanumeric messages (up to 160 characters, depending on the service provider). Signal-to-noise (ratio) Signal-to-Noise Ratio Start of Frame A USB function. Secondary synchronisation signal. Rev 2 Feb.13 Proprietary and Confidential - Contents subject to change 25 Hardware Integration Guide Table 5-1: Acronyms and definitions (Continued) Acronym or term Definition SUPL TIA/EIA Secure User Plane Location Telecommunications Industry Association / Electronics Industry Association. A standards setting trade organization, whose members provide communications and information technology products, systems, distribution services and professional services in the United States and around the world. Consult www.tiaonline.org. TIS TRP UDK UE UICC UL UMTS USB USIM VCC VSWR WAN WCDMA WLAN ZIF Total Isotropic Sensitivity Total Radiated Power Universal Development Kit (for PCI Express Mini Cards) User Equipment Universal Integrated Circuit Card (Also referred to as a SIM card.) Uplink (mobile to network) Universal Mobile Telecommunications System Universal Serial Bus Universal Subscriber Identity Module (UMTS) Supply voltage Voltage Standing Wave Ratio Wide Area Network Wideband Code Division Multiple Access (also referred to as UMTS) Wireless Local Area Network Zero Intermediate Frequency 26 Proprietary and Confidential - Contents subject to change 4112880 Index A accessories, 7 acronyms and definitions, 21 26 antenna connection considerations, 12 custom, design, 13 diversity antenna, disabling, 13 limit, matching coaxial connections, 12 location, considerations, 13 matching, considerations, 13 maximum cable loss, 12 routing, 13 approvals, regulatory and industry, 17 B bands supported, RF CDMA, 12 GSM, 11, 12 LTE, 11 WCDMA, 11 C cable loss antenna, maximum, 12 CDMA frequency band support, 12 connection grounding, 14 connectors, required host-module, 7 D desense. See RF diversity antenna disabling, 13 E EDGE connector, required, 7 F filtering, RF desense, 15 frequency band support CDMA, 12 GSM, 11, 12 LTE, 11 WCDMA, 11 G gain maximum, 18 grounding connection considerations, 14 GSM frequency band support, 11, 12 I impedance moduleantenna, 13 industry approvals, 17 interference device generated, 15 host-generated, 14 wireless devices, 14 L LTE frequency band support, 11 N noise leakage, minimizing, 14 P PCB multi-layer, shielding for RF desense, 15 R radiated sensitivity measurement, 16 radiated spurious emissions, 15 regulatory approvals, 17 regulatory information, 17 20 FCC, 18 limitation of liability, 17 safety and hazards, 17 Rev 2 Feb.13 Proprietary and Confidential - Contents subject to change 27 Hardware Integration Guide RF antenna cable loss, maximum, 12 antenna connection, considerations, 12 connectors, required, 7 desense device-generated, 14 harmonic energy, filtering, 15 mitigation suggestions, 15 shielding suggestions, 15 interference other devices, 15 wireless devices, 14 RF bands supported CDMA, 12 GSM, 11, 12 LTE, 11 WCDMA, 11 RF specifications, 11 16 RSE, 15 S sensitivity radiated measurement, overview, 16 shielding module, compliance, 12 reducing RF desense, 15 SIM connector, required, 7 specifications RF, 11 16 W WCDMA frequency band support, 11 Z ZIF (Zero Intermediate Frequency), 14 28 Proprietary and Confidential - Contents subject to change 4112880
| 1 2 3 | Warranty, Safety and Regulatory information | Users Manual | 464.72 KiB | April 05 2015 |
Warranty, Safety, and Regulatory Information Garantie, veiligheid en informatie over regelgeving Informations sur les rglementations, la garantie et la scurit WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Important Notice Your purchase and use of this product is subject to and governed by Dells applicable Terms of Sale which will be presented to you at setup and which are available online. If you are a consumer customer and you purchased directly from Dell, your purchase is governed by the U.S. Consumer Terms of Sale at www.dell.com/consumerterms. Para obtener una versin en espaol de las condiciones de venta, visite www.dell.com/condicionesdecompra. If you are a consumer customer and you purchased through a retail store, your purchase is governed by the Retail Purchaser End User Agreement at www.dell.com/retailagreement. If you are in Canada, the agreement that governs your purchase can be located at www.dell.ca/terms. Unless you have a separate written agreement with Dell that specifically applies to your order, if you are a commercial customer and you purchased this product directly from Dell for your internal use, your purchase is governed by the Commercial Terms of Sale: www.dell.com/CTS. YOUR AGREEMENT WITH DELL CONTAINS VERY IMPORTANT INFORMATION ABOUT YOUR RIGHTS AND OBLIGATIONS, AS WELL AS LIMITATIONS AND EXCLUSIONS. THE AGREEMENT REQUIRES THE USE OF ARBITRATION ON AN INDIVIDUAL BASIS TO RESOLVE DISPUTES, and where applicable, specifies arbitration INSTEAD OF JURY TRIALS OR CLASS ACTIONS. PLEASE REVIEW THE TERMS CAREFULLY. For the avoidance of doubt, to the extent that Dell is deemed under applicable law to have accepted an offer by you: (a) Dell hereby objects to and rejects all additional or inconsistent terms that may be contained in any purchase order or other documentation submitted by you in connection with your order; and (b) Dell hereby conditions its acceptance on your assent that the foregoing terms and conditions shall exclusively control. IF YOU DO NOT AGREE WITH THESE TERMS, DO NOT USE YOUR PRODUCT AND RETURN IT TO DELL IN ACCORDANCE WITH DELLS RETURN POLICY LOCATED AT www.dell.com/returnpolicy (United States) and www.dell.ca/terms (Canada-English) and www.dell.ca/conditions (Canada-French). About Dells Limited Hardware Warranty Download or print Dells Limited Hardware Warranty at www.dell.com/warranty (United States), www.dell.ca/warranty (Canada-English) and www.dell.ca/garantie (Canada-French), or call to request a hard copy of the Limited Hardware Warranty. U.S. Customers: 1-877-884-3355. Canadian Customers: 1-800-387-5757. What if I purchased a service contract?
If your service contract is with Dell or if you purchased a service contract through us with a third-party service provider you may download or print it from www.dell.com/servicecontracts. Safety and Regulatory Information You can find additional recommended Product Safety Best Practices and Regulatory Compliance information on Accessibility, Communications Devices (Radio and Modem), Electromagnetic Compatibility (EMC), Electrostatic Shock (ESD), Energy, Environmental (REACH and RoHS), Ergonomics, Material Safety (MSDS), Transportation, and TV Tuners on the Regulatory Compliance webpage, www.dell.com/regulatory_compliance. WARNING: Use of controls, adjustments, procedures, connections, or signal types other than those specified in your documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. WARNING: Dell products are not certified as medical electrical equipment, and are not intended for use in close proximity to patients or in oxygen rich environments. Dell products are not designed for use in hazardous environments. Dell products are not designed or intended for use in operating or calibrating medical devices. When setting up the equipment for use:
Place the equipment on a hard, level surface. Do not stack the equipment, place it in an enclosed space, or otherwise install it where it is subject to heated air. The equipment should have least 10.2 cm (4 inches) of clearance on all vented sides to permit the airflow required for proper ventilation. Restricting airflow can damage the equipment or cause overheating. If your device includes a modem, the cable used with the modem should be manufactured with a minimum wire size of 26 American Wire Gauge (AWG) and an FCC compliant RJ11 modular plug. WARNING: Do not operate your equipment with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, and so on) removed. Do not use your equipment in a wet environment. Protect equipment from liquid intrusion. Do not use damaged equipment, including exposed, frayed, or damaged power cords. Do not push any objects into the air vents or openings of your equipment. Doing so can cause fire or electric shock by shorting out interior components. Do not allow your portable computer or adapter to operate with the base resting directly on exposed skin for extended periods of time. The surface temperature of the base will rise during normal operation, particularly when AC power is present. Allowing sustained contact with exposed skin can cause discomfort or burn. To remove a portable computer from all power sources, turn the computer off, disconnect the AC adapter from the electrical outlet, and remove any battery installed in the battery bay or module bay. When Working Inside Your Device WARNING: Hazardous moving parts. Keep away from the moving fan blades. Do not attempt to service the equipment yourself, except as explained in your Dell documentation or in instructions otherwise provided to you by Dell. Always follow installation and service instructions closely. Internal components may become very hot during normal operation. Before touching any internal components, allow time for them to cool. Disconnect all cables from the portable computer including the phone cable before opening the memory/modem access door. Check the voltage rating before you connect the equipment to an electrical outlet to ensure that the required voltage and frequency match the available powersource. If your device has a manual voltage-selection switch, your voltage-selection switch on the back panel must be manually set to operate at the correct operating voltage used in your location. To prevent electric shock, plug the equipment power cables into properly grounded electrical outlets, and use only the approved power cables rated for the equipment. For 3-pin plugs, do not use adapter plugs without the ground pin or remove the ground pin from the plug. Adapter Safety WARNING:Use only the Dell-provided AC adapter approved for use with this device. Use of another AC adapter may cause a fire or explosion. The AC adapter may become hot during normal operation of your computer. Ensure adequate ventilation and use care when handling the adapter during or immediately after operation. Do not use an auto-adapter DC power cable connected via either an automobile cigarette lighter adapter or an empower-type connector in vehicles with high voltage (24 VDC), such as commercial transport vehicles. Battery Safety WARNING: Using an incompatible battery or a third-party battery may increase the risk of fire or explosion. Replace the battery only with a battery purchased from Dell that is designed to work with your Dell computer. Do not use a battery from other computers with your computer. A damaged battery may pose a risk of personal injury. Damage may include impact or shock that dents or punctures the battery, exposure to a flame, or other deformation. Do not disassemble the battery. Handle a damaged or leaking battery pack with extreme care. If the battery is damaged, electrolyte may leak from the cells or fire may result which may cause personal injury. ENERGY STAR Compliance The Environmental Protection Agencys (EPA) ENERGY STAR program is a joint effort between the EPA and manufacturers to reduce air pollution by promoting energy-efficient products. ENERGY STAR Label Any Dell product bearing the ENERGY STAR emblem electronically or physically on the product is certified to comply with the EPA ENERGY STAR requirements as configured when shipped by Dell. User Information available www.dell.com/energystar. For additional power-management specific information, see www.energystar.gov/powermanagement. For additional information on the ENERGY STAR program, see www.energystar.gov. Perchlorate Material This products coin-cell battery may contain perchlorate and may require special handling when recycled or disposed of. For more information, see www.dtsc.ca.gov/hazardouswaste/perchlorate. Recycling Information Dell recommends that customers dispose of their used computer hardware, monitors, printers, and other peripherals in an environmentally-sound manner. Potential methods include reuse of parts or whole products and recycling of products, components, and/or materials. For specific information on Dells worldwide recycling programs, see dell.com/recycle. Location of Radio Regulatory Labels For some portable computers, the radio regulatory labels may be found either in the battery compartment, or under the bottom access panel. Display Lamp Disposal Lamps inside this product contain mercury (Hg) and must be recycled or disposed of according to local, state, or federal laws. For more information, contact the electronic industries alliance at www.eiae.org. For lamp-specific disposal information check www.lamprecycle.org. GEVAAR: Een GEVAARMELDING duidt op de kans op schade aan eigendommen, lichamelijk letsel of overlijden. Informatie over veiligheid en regelgeving Meer informatie over best practices op het gebied van productveiligheid en overeenstemming met de richtlijnen inzake toegankelijkheid, communicatieapparatuur (radio en modem), elektromagnetische compatibiliteit (EMC), elektrostatische schokken (ESD), energie en milieutechniek
(REACH en RoHS), ergonomie, veiligheid (MSDS), transport en televisietuners vindt u op de website voor overeenstemming met de regelgeving:
www.dell.com/regulatory_compliance. WAARSCHUWING: Het gebruik van besturingselementen, instellingen, procedures, verbindingen of signaaltypen die niet in uw documentatie worden vermeld, kan blootstelling aan een elektrische schok, stroomstoringen en/of mechanische beschadiging tot gevolg hebben. WAARSCHUWING: De producten van Dell zijn niet gecertificeerd als medische apparatuur en zijn niet bestemd voor gebruik in de nabijheid van patinten ofin zuurstofrijke omgevingen. De producten van Dell zijn niet ontworpen voor gebruik in gevaarlijke omgevingen. De producten van Dell zijn niet ontworpen of bedoeld voor gebruik bij het bedienen of kalibreren van medische apparaten. Wanneer u het apparaat voor gebruik instelt:
Plaats de apparatuur op een hard, gelijkmatig oppervlak. Stapel geen apparatuur op elkaar, stel deze niet in een besloten ruimte op en installeer deze niet op locaties waar deze aan verwarmde lucht wordt blootgesteld. Aanalle zijden van de apparatuur met ventilatiegaten moet minimaal 10,2 cm vrije ruimte aanwezig zijn om de voor de juiste ventilatie vereiste luchtcirculatie te bieden. Een beperking van de luchtstroom kan ertoe leiden dat de apparatuur beschadigd of oververhit raakt. Als uw apparaat een modem bevat, moet de kabel die bij het modem gebruikt wordt een minimum draadgrootte hebben van 26 AWG (American Wire Gauge - 0.40386mm) en voorzien zijn van een RJ11 modulaire plug die aan de standaard FCC voldoet. WAARSCHUWING: Maak geen gebruik van de computer als er een computerhoes of -kap is verwijderd, zoals de computerbehuizing, montagekaders, beugels of voorpanelen. Gebruik de apparatuur niet in vochtige omgevingen. Bescherm de apparatuur tegen indringend vocht. Gebruik geen beschadigde apparatuur, zoals open, gespleten of beschadigde stroomsnoeren. Duw geen objecten in de ventilatieopeningen of andere openingen van de apparatuur. Als u dat wel doet, loopt u het risico brand of een elektrische schok te veroorzaken door kortsluiting in de interne onderdelen. Zorg ervoor dat uw draagbare computer of adapter niet gedurende een lange periode rechtstreeks in contact met uw huid komt. De oppervlaktetemperatuur van de onderkant zal tijdens normaal gebruik stijgen, met name wanneer er netstroom aanwezig is. Langdurig contact met de huid kan leiden tot een onprettig gevoel of zelfs tot brandwonden. Om alle stroomvoorziening naar een draagbare computer te verwijderen, moet u de computer uitzetten, de stekker van de netadapter uit het stopcontact verwijderen en alle batterijen verwijderen die in het batterij- of geheugenmodulecompartiment zijn genstalleerd. Tijdens het werken binnen de apparatuur WAARSCHUWING: Gevaarlijke bewegende onderdelen. Blijf uit de buurt van de bewegende ventilatorschoepen. Probeer zelf geen reparaties op het apparaat uit te voeren, tenzij dit gebeurt volgens aanwijzingen in de documentatie van Dell of andere instructies die u van Dellhebt ontvangen. Volg altijd nauwkeurig de installatie-
en onderhoudsinstructies. Interne onderdelen kunnen erg warm worden tijdens normaal gebruik. Geef interne onderdelen de tijd om af te koelen voordat u ze aanraakt. Verwijder alle kabel uit de draagbare computer, inclusief de telefoonkabel, alvorens u de klep voor toegang tot tot het geheugen/modemcompartiment opent. Controleer het toegestane voltage voordat u de apparatuur aansluit op een stopcontact om ervoor te zorgen dat het vereiste voltage en de vereiste stroomfrequentie overeenkomen met de beschikbare stroombron. Als het achterpaneel van uw computer is uitgerust met een handmatige voltageselectieschakelaar, dient u deze schakelaar handmatig in te stellen op het juiste voltageniveau voor uw locatie. Ter voorkoming van elektrische schokken dient u de stroomkabels van de apparatuur uitsluitend op geaarde stopcontacten aan te sluiten en dient u alleen stroomkabels te gebruiken die voor de apparatuur zijn goedgekeurd en die de juiste belasting aankunnen. Voor stekkers met drie pennen mag u geen adapterstekkers zonder aardpen gebruiken. Evenmin mag u de aardpen uit de stekker verwijderen. Veiligheidsinstructies adapter WAARSCHUWING: Gebruik alleen de door Dell meegeleverde netadapter die is goedgekeurd voor gebruik met deze handheld. Gebruik van een andere netadapter kan brand of explosiesveroorzaken. De netadapter kan bij normaal gebruik van de computer heet worden. Zorg ervoor dat er voldoende ventilatie is en wees voorzichtig wanneer u de adapter tijdens of onmiddellijk na werking aanraakt. Sluit geen gelijkstroomkabel op de adapter aan indien de stroomkabel is aangesloten op een auto-aansteker of op een aansluiting van het type Empower in autos met een hoge spanning
(24 V gelijkstroom), zoals bedrijfsvoertuigen. Veiligheid van de batterij WAARSCHUWING: Als u een incompatibele batterij of een batterij van een andere leverancier gebruikt, kan dit de kans op brand of een explosie vergroten. Vervang de batterij alleen door een batterij die u bij Dell hebt aangeschaft en die speciaal is ontwikkeld voor gebruik in combinatie met uw computer. Gebruik geen batterij van een andere computer bij uw computer. Een beschadigde batterij kan persoonlijk letsel veroorzaken. Schade kan onder meer omvatten een schok of botsing waardoor de batterij wordt doorboord of ingedeukt, blootstelling aan vuur of een andere vorm van vervorming. Maak de batterij niet open. U moet een beschadigde of lekkende batterij met de grootste voorzichtigheid behandelen. Als de batterij is beschadigd, kan er elektrolyt uit de cellen lekken of kan er brand ontstaan, hetgeen tot lichamelijk letsel kan leiden. ENERGY STAR-conformiteit Het ENERGY STAR-programma van de EPA (Environmental Protection Agency) is een gezamenlijk initiatief van de EPA en fabrikanten om de luchtvervuiling terug te dringen door het gebruik van energiezuinige producten te bevorderen. ENERGY STAR-label Alle Dell-producten die zijn voorzien van het ENERGY STAR- logo, het zij elektronisch het zij fysiek, voldoen bij verzending door Dell en in de configuratie waarmee ze worden verzonden aan de ENERGY STAR-vereisten van de EPA. Gebruikersinformatie is beschikbaar op www.dell.com/energystar. Voor meer informatie over energiebeheer kunt u terecht op www.energystar.gov/powermanagement. Voor meer informatie over het ENERGY STAR-programma kunt u terecht op www.energystar.gov. Materiaal met perchloraat De knoopcelbatterij in dit product bevat mogelijk perchloraat. Het afdanken of recyclen van dit product vereist dientengevolge een speciale procedure. Raadpleegvoor meer informatie www.dtsc.ca.gov/hazardouswaste/perchlorate. Informatie over recycling Dell adviseert gebruikers om zich zich op een milieuvriendelijke manier ontdoen van hun afgedankte computerhardware, monitors, printers en andere randapparatuur. Eventuele methodes omvatten het hergebruik van onderdelen of van het gehele product en het recycleren van producten, onderdelen en/of grondstoffen. Voor meer informatie over de wereldwijde recyclingprogrammas van Dell kunt u terecht op. Raadpleeg dell.com/recycle. Locatie van de labels met radioregelgevingsinformatie Bij sommige draagbare computers vindt u de labels met de radio-regelgevingsinformatie in het batterijvak of onder het toegangspaneel aan de onderkant van het apparaat. AVERTISSEMENT : un AVERTISSEMENT indique un risque dendommagement du matriel, de blessure corporelle ou de mort. propos de la Garantie matrielle limite Dell Tlchargez ou imprimez la Garantie matrielle limite Dell partir du site www.dell.com/warranty (tats-Unis), www.dell.ca/warranty (Anglais Canada) et www.dell.ca/garantie (Franais Canada), ou appelez pourdemander une copie imprime de la Garantie matrielle limite. Clients rsidant aux -U : 1-877-884-3355 Clients rsidant au Canada : 1-800-387-5757. 2013 - 2015 Dell Inc. Printed in U.S.A. 2015-01 Conformit ENERGY STAR Le programme ENERGY STAR de lEPA (Environmental Protection Agency) est le rsultat dun effort conjoint de lEPA et des fabricants dordinateurs visant rduire la pollution atmosphrique en encourageant lutilisation dappareils informatiques faible consommation dnergie. tiquette ENERGY STAR Tout produit Dell portant le symbole ENERGY STAR lectroniquement ou physiquement est conforme aux spcifications EPA ENERGY STAR tant que le systme garde sa configuration dorigine, telle que livre par Dell. Des informations destines lutilisateur sont disponibles sur www.dell.com/energystar. Vous trouverez des informations supplmentaires relatives la gestion de lalimentation sur www.energystar.gov/
powermanagement. Vous trouverez des informations supplmentaires concernant le programme ENERGY STAR sur www.energystar.gov. Matriaux contenant du perchlorate La pile bouton de ce produit peut contenir du perchlorate. Son recyclage et sa mise au rebut peuvent donc exiger une manutention particulire. Pour de plus amples informations, voir www.dtsc.ca.gov/hazardouswaste/perchlorate. Informations sur le recyclage Dell recommande ses clients de mettre au rebut leurs matriel informatique, moniteurs, imprimantes et autres priphriques usags dans le respect de lenvironnement. Les mthodes possibles incluent la rutilisation de pices ou de produits entiers et le recyclage des produits, composants, et/ou matriels. Pour obtenir des informations particulires sur les programmes mondiaux de recyclage de Dell, rendez-vous sur le site dell.com/recycle. Emplacement des tiquettes de conformit aux normesradio Les tiquettes de conformit aux normes radio peuvent se trouver dans le compartiment de batterie ou sous le panneau daccs infrieur de certains ordinateurs. Que se passe-t-il si jai souscrit un contrat de service ?
Si vous avez souscrit un contrat de service avec Dell ou si vous avez achet un contrat de service dun fournisseur tiers par lintermdiaire de Dell, vous pouvez le tlcharger ou limprimer partir du site. www.dell.com/servicecontracts. Informations sur les rglementations et la scurit Vous trouverez des informations sur les Product Safety Best Practices and Regulatory Compliance (Meilleures pratiques concernant la scurit des produits et la conformit aux rglementations) sappliquant lAccessibilit, aux Communications Devices (Dispositifs de communications)
(radio et modem), lElectromagnetic Compatibility
(Compatibilit lectromagntique (EMC)), lElectrostatic Shock (Dcharges lectrostatiques) (ESD), lnergie, aux Conditions environnementales (REACH et RoHS), lErgonomie, la Scurit du matriel (MSDS), aux Transports et aux Tuners TV sur la page Web Regulatory Compliance
(Conformit aux rglementations), sur www.dell.com/regulatory_compliance. AVERTISSEMENT : lutilisation de commandes, rglages, procdures, connexions ou types de signaux autres que ceux indiqus dans la documentation peut entraner des risques dlectrocution et de dommages mcaniques. AVERTISSEMENT : les produits Dell ne sont pas certifis en tant ququipement lectrique mdical et ne sont pas conus pour une utilisation proximit de patients ou dans des environnements riches en oxygne. Les produits Dell ne sont pas conus pour une utilisation dans des environnements dangereux. Les produits Dell ne sont pas conus pour une utilisation lors du calibrage dappareils mdicaux ou en conjonction avec lutilisation de tels appareils. Lorsque vous vous prparez utiliser lappareil :
Placez-le sur une surface rigide et plane. Nempilez pas lquipement, ne le placez pas dans un lieu confin ; en dautres termes, ne linstallez pas proximit dune source dair chaud. Laissez un dgagement dau moins 10,2 cm (4 po) au niveau des entres dair de lquipement afin de permettre lair de circuler. Restreindre la ventilation risque dendommager lquipement ou de provoquer une surchauffe. Si votre appareil comprend un modem, le cble utilis avec le modem doit avoir une taille minimale de 26 AWG
(American Wire Gauge) et une fiche modulaire RJ11 conforme la norme FCC. AVERTISSEMENT : ne faites pas fonctionner votre ordinateur lorsquun capot est retir (notamment les capots de lordinateur, les cadres, les languettes mtalliques, les caches du panneau avant, etc...). Nutilisez pas lquipement dans un environnement humide. Protgez lquipement contre les infiltrations de liquide. Nutilisez pas un quipement endommag, notamment avec un cordon dalimentation dnud, effiloch ou endommag. Nintroduisez pas dobjets dans les entres dair ou autres ouvertures de votre appareil. Cela risquerait de provoquer un incendie ou un choc lectrique d un court-circuit des composants internes. vitez de poser votre ordinateur portable ou votre adaptateur en fonctionnement sur vos genoux, mme la peau, pendant une priode prolonge. La temprature de la surface de la base augmente pendant le fonctionnement normal de lordinateur (notamment sil est aliment par le secteur). Le contact prolong avec la peau peut causer inconfort ou brlure. Pour mettre un ordinateur portable totalement hors tension, teignez-le, dbranchez ladaptateur secteur de la prise lectrique et retirez toutes les batteries installes dans la baie de la batterie ou la baie modulaire. Intervention sur votre appareil AVERTISSEMENT : pices mobiles dangereuses. Tenez-vous lcart des pales de ventilateur enmouvement. Ne tentez pas de dpanner lappareil par vous-mme, except si cela est indiqu dans votre documentation Dell ou dans des instructions qui vous ont t fournies dune autre manire par Dell. Suivez toujours de prs les instructions dinstallation et dentretien. Les composants internes peuvent surchauffer en fonctionnement normal. Avant de toucher des composants internes, laissez-les refroidir. Dbranchez tous les cbles de lordinateur portable, ycompris le cble tlphonique, avant douvrir le cache daccs la mmoire/au modem. Vrifiez la tension nominale avant de raccorder lappareil une prise lectrique, afin de vous assurer que la tension et la frquence requises sont compatibles avec la source dalimentation lectrique disponible. Si votre appareil est quip dun interrupteur de slection manuelle de la tension, vous devez vous assurer que linterrupteur de slection manuelle de la tension situ sur le panneau arrire est configur de sorte fonctionner la tension approprie lendroit o vous vous trouvez. Pour prvenir tout choc lectrique, branchez les cbles dalimentation de lquipement dans des prises lectriques correctement mises la terre et nutilisez que des cbles dalimentation approuvs dont lintensit nominale est approprie lquipement. Dans le cas des prises 3 broches, nutilisez pas de prise dadaptation sans broche de mise la masse et ne retirez pas de la prise la broche de mise la masse. Mesures de scurit relatives ladaptateur CA AVERTISSEMENT :Nutilisez que ladaptateur secteur fourni par Dell et homologu pour cet appareil. Lutilisation dun autre adaptateur secteur peut provoquer un incendie ou uneexplosion. Ladaptateur secteur peut chauffer lorsque vous utilisez votre ordinateur. Assurez-vous que la ventilation est adquate et prenez des prcautions lors de la manipulation de ladaptateur au cours de son fonctionnement ou immdiatement aprs. Nutilisez pas le cble dalimentation en CC dun adaptateur de voiture raccord via un adaptateur dallume-cigare dautomobile ou un connecteur de type empower dans des vhicules avec une tension leve
(24VCC), comme des vhicules de transport commercial. Scurit relative la batterie AVERTISSEMENT : lutilisation dune batterie incompatible ou de tiers peut accrotre les risques dincendie ou dexplosion. Remplacez la batterie uniquement par une batterie achete auprs de Dell, conue pour fonctionner avec votre ordinateur Dell. Nutilisez pas la batterie dun autre ordinateur. Une batterie endommage peut prsenter un risque de blessures corporelles. La batterie peut tre endommage en cas dimpact ou de choc, dexposition une flamme ou de soumission une dformation. Ne dmontez pas la batterie. Manipulez les batteries endommages ou perces avec une extrme prcaution. Si la batterie est endommage, llectrolyte peut fuir des lments ou un incendie se dclarer et provoquer des blessures corporelles.
| 1 2 3 | User Manual Draft Letter | Cover Letter(s) | 103.49 KiB |
Briggs, Mark From:
Sent:
To:
Cc:
Subject:
Attachments:
Thanh_Nguyen@Dell.com Friday, April 24, 2015 12:24 PM Briggs, Mark Hoque, Claire; Tsai, Lucy; Park, Daniel; Mitchell_Sebring@Dell.com;
Steve_L_Williams@Dell.com; ddixon@sierrawireless.com; jcheng@sierrawireless.com;
ywang@SierraWireless.com; echiu@sierrawireless.com; Vince_Lee@pegatroncorp.com;
Reese_Shen@pegatroncorp.com; Todd_Grabbe@Dell.com; Don_Bobo@Dell.com C2PC application for FCC ID N7NEM7355 Latitude-Setup Guide.pdf DearMark, ThanksforinformingmethesituationoftheusermanualofthehostPCsubmittedinthisC2PCapplication. DellwouldliketoconfirmthattheusermanualintheapplicationisthedraftanditisfortheWiFiversionofthehostPC DellwillprovidethefinalversionoftheusermanualthatshowstherigidhandlealongwithallotherFCCrequireduser informationforbothWiFiandWWAN. SincetheWWANantennasaremountedinsidetherigidhandle,WWANwillbenonfunctionaliftherigidhandleis removed.AttachedistheinstallationguidethatshowsthehostPCwiththerigidhandle.Pleaseacceptthisasan amendedexhibitoftheusermanualintheapplication.Thefinalusermanualcontainingtherigidhandlewillbe providedassoonasitisavailable. IhopethiswillsatisfytheTCBtoissuetheC2PCgrantassoonaspossibleforDelltolaunchtheproduct. Regards, ThanhNguyen GlobalRegulationsandStandards Dell|WorldwideRegulatoryCompliance OneDellWay,MSPS430,RoundRock,Texas78682,USA Phone:5127238862;emailaddress:[thanh_nguyen@dell.com]
1
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2015-04-24 | 1850 ~ 1915 | PCB - PCS Licensed Transmitter | Class II Permissive Change |
| 2 | 2013-05-22 | 1850 ~ 1915 | PCB - PCS Licensed Transmitter | |
| 3 | 2012-12-18 | 1850 ~ 1915 | PCB - PCS Licensed Transmitter | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 2 3 | Effective |
2015-04-24
|
||||
| 1 2 3 |
2013-05-22
|
|||||
| 1 2 3 |
2012-12-18
|
|||||
| 1 2 3 | Applicant's complete, legal business name |
Sierra Wireless Inc.
|
||||
| 1 2 3 | FCC Registration Number (FRN) |
0005810874
|
||||
| 1 2 3 | Physical Address |
13811 Wireless Way
|
||||
| 1 2 3 |
Richmond, BC, N/A
|
|||||
| 1 2 3 |
Canada
|
|||||
| app s | TCB Information | |||||
| 1 2 3 | TCB Application Email Address |
L******@ul.com
|
||||
| 1 2 3 |
h******@acbcert.com
|
|||||
| 1 2 3 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
| app s | FCC ID | |||||
| 1 2 3 | Grantee Code |
N7N
|
||||
| 1 2 3 | Equipment Product Code |
EM7355
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 2 3 | Name |
Y**** W******
|
||||
| 1 2 3 | Title |
Sr. Manager, Regulatory Compliance
|
||||
| 1 2 3 | Telephone Number |
604-2********
|
||||
| 1 2 3 | Fax Number |
604-2********
|
||||
| 1 2 3 |
y******@SierraWireless.com
|
|||||
| app s | Technical Contact | |||||
| 1 2 3 | Firm Name |
Sierra Wireless Inc.
|
||||
| 1 2 3 | Name |
Y**** W****
|
||||
| 1 2 3 | Physical Address |
13811 Wireless Way
|
||||
| 1 2 3 |
Richmond
|
|||||
| 1 2 3 |
Richmond, V6V 3A4
|
|||||
| 1 2 3 |
Canada
|
|||||
| 1 2 3 | Telephone Number |
60423********
|
||||
| 1 2 3 |
604-2********
|
|||||
| 1 2 3 | Fax Number |
60423********
|
||||
| 1 2 3 |
604-2********
|
|||||
| 1 2 3 |
y******@sierrawireless.com
|
|||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 2 3 | No | |||||
| 1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/21/2015 | ||||
| 1 2 3 | 06/18/2013 | |||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 2 3 | Equipment Class | PCB - PCS Licensed Transmitter | ||||
| 1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | PCIe wireless WAN card | ||||
| 1 2 3 | Radio Module | |||||
| 1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 2 3 | Modular Equipment Type | Single Modular Approval | ||||
| 1 2 3 | Purpose / Application is for | Class II Permissive Change | ||||
| 1 2 3 | Original Equipment | |||||
| 1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 2 3 | Grant Comments | Class II Permissive Change to add installation into Dell Portable Host (convertible tablet model P18T with 802.11/Bluetooth module FCC ID: PD97260NGU). The highest reported SAR values for body and simultaneous transmission rf exposure conditions in this filing are 1.15 W/Kg and 1.51 W/Kg respectively. Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use. | ||||
| 1 2 3 | Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use. C2PC to implement 2-way BIOS lock for 3 Lenovo host PC models. In order to allow user installation of transmitter module, the final host PC must utilize the Bios Locking feature as documented in the this filing. | |||||
| 1 2 3 | Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use. | |||||
| 1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 2 3 | Yes | |||||
| 1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| 1 2 3 | Yes | |||||
| app s | Test Firm Name and Contact Information | |||||
| 1 2 3 | Firm Name |
SPORTON International Inc.
|
||||
| 1 2 3 |
China Telecommunication Technology Labs
|
|||||
| 1 2 3 | Name |
L**** H******
|
||||
| 1 2 3 |
Z**** D********
|
|||||
| 1 2 3 | Telephone Number |
886-3******** Extension:
|
||||
| 1 2 3 |
86-10********
|
|||||
| 1 2 3 | Fax Number |
886-3********
|
||||
| 1 2 3 |
86-10********
|
|||||
| 1 2 3 |
l******@sporton.com.tw
|
|||||
| 1 2 3 |
e******@chinattl.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 22H | BC | 824 | 849 | 1.841 | 2.5 ppm | 249KGXW | |||||||||||||||||||||||||||||||||
| 1 | 2 | 22H | BC | 824 | 849 | 0.551 | 2.5 ppm | 240KG7W | |||||||||||||||||||||||||||||||||
| 1 | 3 | 24E | BC | 1850 | 1910 | 0.91 | 2.5 ppm | 244KGXW | |||||||||||||||||||||||||||||||||
| 1 | 4 | 24E | BC | 1850 | 1910 | 0.381 | 2.5 ppm | 240KG7W | |||||||||||||||||||||||||||||||||
| 1 | 5 | 9 | BC | 817 | 824 | 0.264 | 2.5 ppm | 1M28F9W | |||||||||||||||||||||||||||||||||
| 1 | 6 | 22H | BC | 824 | 849 | 0.274 | 2.5 ppm | 1M29F9W | |||||||||||||||||||||||||||||||||
| 1 | 7 | 24E | BC | 1850 | 1910 | 0.273 | 2.5 ppm | 1M28F9W | |||||||||||||||||||||||||||||||||
| 1 | 8 | 22H | BC | 824 | 849 | 0.197 | 2.5 ppm | 4M18F9W | |||||||||||||||||||||||||||||||||
| 1 | 9 | 24E | BC | 1850 | 1910 | 0.209 | 2.5 ppm | 4M20F9W | |||||||||||||||||||||||||||||||||
| 1 | 1 | 27 | BC | 1710 | 1755 | 0.2 | 2.5 ppm | 4M20F9W | |||||||||||||||||||||||||||||||||
| 1 | 11 | 24E | BC | 1850 | 1910 | 0.222 | 2.5 ppm | 4M52F9W | |||||||||||||||||||||||||||||||||
| 1 | 12 | 24E | BC | 1850 | 1910 | 0.218 | 2.5 ppm | 9M04F9W | |||||||||||||||||||||||||||||||||
| 1 | 13 | 24E | BC | 1850 | 1910 | 0.219 | 2.5 ppm | 13M5F9W | |||||||||||||||||||||||||||||||||
| 1 | 14 | 24E | BC | 1850 | 1910 | 0.211 | 2.5 ppm | 17M9F9W | |||||||||||||||||||||||||||||||||
| 1 | 15 | 22H | BC | 824 | 849 | 0.197 | 2.5 ppm | 4M52F9W | |||||||||||||||||||||||||||||||||
| 1 | 16 | 22H | BC | 824 | 849 | 0.195 | 2.5 ppm | 9M04F9W | |||||||||||||||||||||||||||||||||
| 1 | 17 | 24E | BC | 1850 | 1915 | 0.223 | 2.5 ppm | 4M50F9W | |||||||||||||||||||||||||||||||||
| 1 | 18 | 24E | BC | 1850 | 1915 | 0.219 | 2.5 ppm | 9M04F9W | |||||||||||||||||||||||||||||||||
| 1 | 19 | 24E | BC | 1850 | 1915 | 0.22 | 2.5 ppm | 13M4F9W | |||||||||||||||||||||||||||||||||
| 1 | 2 | 24E | BC | 1850 | 1915 | 0.218 | 2.5 ppm | 17M9F9W | |||||||||||||||||||||||||||||||||
| 1 | 21 | 27 | BC | 1710 | 1755 | 0.218 | 2.5 ppm | 4M48F9W | |||||||||||||||||||||||||||||||||
| 1 | 22 | 27 | BC | 1710 | 1755 | 0.217 | 2.5 ppm | 9M04F9W | |||||||||||||||||||||||||||||||||
| 1 | 23 | 27 | BC | 1710 | 1755 | 0.218 | 2.5 ppm | 13M4F9W | |||||||||||||||||||||||||||||||||
| 1 | 24 | 27 | BC | 1710 | 1755 | 0.214 | 2.5 ppm | 17M9F9W | |||||||||||||||||||||||||||||||||
| 1 | 25 | 27 | BC | 704 | 716 | 0.206 | 2.5 ppm | 4M48F9W | |||||||||||||||||||||||||||||||||
| 1 | 26 | 27 | BC | 704 | 716 | 0.196 | 2.5 ppm | 9M08F9W | |||||||||||||||||||||||||||||||||
| 1 | 27 | 27 | BC | 777 | 787 | 0.2 | 2.5 ppm | 4M52F9W | |||||||||||||||||||||||||||||||||
| 1 | 28 | 27 | BC | 777 | 787 | 0.187 | 2.5 ppm | 9M08F9W | |||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 2 | 1 | 22H | BC | 824 | 849 | 1.841 | 2.5 ppm | 249KGXW | |||||||||||||||||||||||||||||||||
| 2 | 2 | 22H | BC | 824 | 849 | 0.551 | 2.5 ppm | 240KG7W | |||||||||||||||||||||||||||||||||
| 2 | 3 | 24E | BC | 1850 | 1910 | 0.91 | 2.5 ppm | 244KGXW | |||||||||||||||||||||||||||||||||
| 2 | 4 | 24E | BC | 1850 | 1910 | 0.381 | 2.5 ppm | 240KG7W | |||||||||||||||||||||||||||||||||
| 2 | 5 | 9 | BC | 817 | 824 | 0.264 | 2.5 ppm | 1M28F9W | |||||||||||||||||||||||||||||||||
| 2 | 6 | 22H | BC | 824 | 849 | 0.274 | 2.5 ppm | 1M29F9W | |||||||||||||||||||||||||||||||||
| 2 | 7 | 24E | BC | 1850 | 1910 | 0.273 | 2.5 ppm | 1M28F9W | |||||||||||||||||||||||||||||||||
| 2 | 8 | 22H | BC | 824 | 849 | 0.197 | 2.5 ppm | 4M18F9W | |||||||||||||||||||||||||||||||||
| 2 | 9 | 24E | BC | 1850 | 1910 | 0.209 | 2.5 ppm | 4M20F9W | |||||||||||||||||||||||||||||||||
| 2 | 1 | 27 | BC | 1710 | 1755 | 0.2 | 2.5 ppm | 4M20F9W | |||||||||||||||||||||||||||||||||
| 2 | 11 | 24E | BC | 1850 | 1910 | 0.222 | 2.5 ppm | 4M52F9W | |||||||||||||||||||||||||||||||||
| 2 | 12 | 24E | BC | 1850 | 1910 | 0.218 | 2.5 ppm | 9M04F9W | |||||||||||||||||||||||||||||||||
| 2 | 13 | 24E | BC | 1850 | 1910 | 0.219 | 2.5 ppm | 13M5F9W | |||||||||||||||||||||||||||||||||
| 2 | 14 | 24E | BC | 1850 | 1910 | 0.211 | 2.5 ppm | 17M9F9W | |||||||||||||||||||||||||||||||||
| 2 | 15 | 22H | BC | 824 | 849 | 0.197 | 2.5 ppm | 4M52F9W | |||||||||||||||||||||||||||||||||
| 2 | 16 | 22H | BC | 824 | 849 | 0.195 | 2.5 ppm | 9M04F9W | |||||||||||||||||||||||||||||||||
| 2 | 17 | 24E | BC | 1850 | 1915 | 0.223 | 2.5 ppm | 4M50F9W | |||||||||||||||||||||||||||||||||
| 2 | 18 | 24E | BC | 1850 | 1915 | 0.219 | 2.5 ppm | 9M04F9W | |||||||||||||||||||||||||||||||||
| 2 | 19 | 24E | BC | 1850 | 1915 | 0.22 | 2.5 ppm | 13M4F9W | |||||||||||||||||||||||||||||||||
| 2 | 2 | 24E | BC | 1850 | 1915 | 0.218 | 2.5 ppm | 17M9F9W | |||||||||||||||||||||||||||||||||
| 2 | 21 | 27 | BC | 1710 | 1755 | 0.218 | 2.5 ppm | 4M48F9W | |||||||||||||||||||||||||||||||||
| 2 | 22 | 27 | BC | 1710 | 1755 | 0.217 | 2.5 ppm | 9M04F9W | |||||||||||||||||||||||||||||||||
| 2 | 23 | 27 | BC | 1710 | 1755 | 0.218 | 2.5 ppm | 13M4F9W | |||||||||||||||||||||||||||||||||
| 2 | 24 | 27 | BC | 1710 | 1755 | 0.214 | 2.5 ppm | 17M9F9W | |||||||||||||||||||||||||||||||||
| 2 | 25 | 27 | BC | 704 | 716 | 0.206 | 2.5 ppm | 4M48F9W | |||||||||||||||||||||||||||||||||
| 2 | 26 | 27 | BC | 704 | 716 | 0.196 | 2.5 ppm | 9M08F9W | |||||||||||||||||||||||||||||||||
| 2 | 27 | 27 | BC | 777 | 787 | 0.2 | 2.5 ppm | 4M52F9W | |||||||||||||||||||||||||||||||||
| 2 | 28 | 27 | BC | 777 | 787 | 0.187 | 2.5 ppm | 9M08F9W | |||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 3 | 1 | 22H | BC | 824 | 849 | 1.841 | 2.5 ppm | 249KGXW | |||||||||||||||||||||||||||||||||
| 3 | 2 | 22H | BC | 824 | 849 | 0.551 | 2.5 ppm | 240KG7W | |||||||||||||||||||||||||||||||||
| 3 | 3 | 24E | BC | 1850 | 1910 | 0.91 | 2.5 ppm | 244KGXW | |||||||||||||||||||||||||||||||||
| 3 | 4 | 24E | BC | 1850 | 1910 | 0.381 | 2.5 ppm | 240KG7W | |||||||||||||||||||||||||||||||||
| 3 | 5 | 9 | BC | 817 | 824 | 0.264 | 2.5 ppm | 1M28F9W | |||||||||||||||||||||||||||||||||
| 3 | 6 | 22H | BC | 824 | 849 | 0.274 | 2.5 ppm | 1M29F9W | |||||||||||||||||||||||||||||||||
| 3 | 7 | 24E | BC | 1850 | 1910 | 0.273 | 2.5 ppm | 1M28F9W | |||||||||||||||||||||||||||||||||
| 3 | 8 | 22H | BC | 824 | 849 | 0.197 | 2.5 ppm | 4M18F9W | |||||||||||||||||||||||||||||||||
| 3 | 9 | 24E | BC | 1850 | 1910 | 0.209 | 2.5 ppm | 4M20F9W | |||||||||||||||||||||||||||||||||
| 3 | 1 | 27 | BC | 1710 | 1755 | 0.2 | 2.5 ppm | 4M20F9W | |||||||||||||||||||||||||||||||||
| 3 | 11 | 24E | BC | 1850 | 1910 | 0.222 | 2.5 ppm | 4M52F9W | |||||||||||||||||||||||||||||||||
| 3 | 12 | 24E | BC | 1850 | 1910 | 0.218 | 2.5 ppm | 9M04F9W | |||||||||||||||||||||||||||||||||
| 3 | 13 | 24E | BC | 1850 | 1910 | 0.219 | 2.5 ppm | 13M5F9W | |||||||||||||||||||||||||||||||||
| 3 | 14 | 24E | BC | 1850 | 1910 | 0.211 | 2.5 ppm | 17M9F9W | |||||||||||||||||||||||||||||||||
| 3 | 15 | 22H | BC | 824 | 849 | 0.197 | 2.5 ppm | 4M52F9W | |||||||||||||||||||||||||||||||||
| 3 | 16 | 22H | BC | 824 | 849 | 0.195 | 2.5 ppm | 9M04F9W | |||||||||||||||||||||||||||||||||
| 3 | 17 | 24E | BC | 1850 | 1915 | 0.223 | 2.5 ppm | 4M50F9W | |||||||||||||||||||||||||||||||||
| 3 | 18 | 24E | BC | 1850 | 1915 | 0.219 | 2.5 ppm | 9M04F9W | |||||||||||||||||||||||||||||||||
| 3 | 19 | 24E | BC | 1850 | 1915 | 0.22 | 2.5 ppm | 13M4F9W | |||||||||||||||||||||||||||||||||
| 3 | 2 | 24E | BC | 1850 | 1915 | 0.218 | 2.5 ppm | 17M9F9W | |||||||||||||||||||||||||||||||||
| 3 | 21 | 27 | BC | 1710 | 1755 | 0.218 | 2.5 ppm | 4M48F9W | |||||||||||||||||||||||||||||||||
| 3 | 22 | 27 | BC | 1710 | 1755 | 0.217 | 2.5 ppm | 9M04F9W | |||||||||||||||||||||||||||||||||
| 3 | 23 | 27 | BC | 1710 | 1755 | 0.218 | 2.5 ppm | 13M4F9W | |||||||||||||||||||||||||||||||||
| 3 | 24 | 27 | BC | 1710 | 1755 | 0.214 | 2.5 ppm | 17M9F9W | |||||||||||||||||||||||||||||||||
| 3 | 25 | 27 | BC | 704 | 716 | 0.206 | 2.5 ppm | 4M48F9W | |||||||||||||||||||||||||||||||||
| 3 | 26 | 27 | BC | 704 | 716 | 0.196 | 2.5 ppm | 9M08F9W | |||||||||||||||||||||||||||||||||
| 3 | 27 | 27 | BC | 777 | 787 | 0.2 | 2.5 ppm | 4M52F9W | |||||||||||||||||||||||||||||||||
| 3 | 28 | 27 | BC | 777 | 787 | 0.187 | 2.5 ppm | 9M08F9W | |||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC