Compass Series HSPA USB Modem Installation Guide 2130961 Rev 1.0 Important Notice Safety and Hazards Limitation of Liability Preface Due to the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Sierra Wireless modem are used in a normal manner with a well-constructed network, the Sierra Wireless modem should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Sierra Wireless accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Sierra Wireless modem, or for failure of the Sierra Wireless modem to transmit or receive such data. Do not operate the Sierra Wireless modem in areas where blasting is in progress, where explosive atmospheres may be present, near medical equipment, near life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the Sierra Wireless modem MUST BE POWERED OFF. The Sierra Wireless modem can transmit signals that could interfere with this equipment. Do not operate the Sierra Wireless modem in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the Sierra Wireless modem MUST BE POWERED OFF. When operating, the Sierra Wireless modem can transmit signals that could interfere with various onboard systems. Note: Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open. Sierra Wireless modems may be used at this time. The driver or operator of any vehicle should not operate the Sierra Wireless modem while in control of a vehicle. Doing so will detract from the driver or operator's control and operation of that vehicle. In some states and provinces, operating such communications devices while in control of a vehicle is an offence. The information in this manual is subject to change without notice and does not represent a commitment on the part of Sierra Wireless. SIERRA WIRELESS AND ITS AFFILIATES SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR Rev 1.0 Apr.08 3 Compass Series HSPA USB Modem Installation Guide REVENUE OR ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE ANY SIERRA WIRELESS PRODUCT, EVEN IF SIERRA WIRELESS AND/OR ITS AFFILIATES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR THEY ARE FORESEEABLE OR FOR CLAIMS BY ANY THIRD PARTY. Notwithstanding the foregoing, in no event shall Sierra Wireless and/or its affiliates aggregate liability arising under or in connection with the Sierra Wireless product, regardless of the number of events, occurrences, or claims giving rise to liability, be in excess of the price paid by the purchaser for the Sierra Wireless product. Patents 5,847,553 6,191,741 6,516,204 6,785,830 6,886,049 7,106,569 5,878,234 5,845,216 6,199,168 6,169,884 6,561,851 6,400,336 6,845,249 6,697,030 6,968,171 6,879,585 7,053,843 7,145,267 7, 287,162 D442,170 D459,303 Portions of this product may be covered by some or all of the following US patents:
5,515,013 5,629,960 5,929,815 5,890,057 6,359,591 6,339,405 6,653,979 6,643,501 6,847,830 6,876,697 7,023,878 6,985,757 7,200,512 7,295,171 D599,256 D560,911 and other patents pending. This product includes technology licensed from:
Licensed by QUALCOMM Incorporated under one or more of the following United States patents and/or their counterparts in other nations:
4,901,307 5,267,261 5,490,165 5,544,196 5,710,784 Manufactured or sold by Sierra Wireless or its licensees under one or more patents licensed from InterDigital Group. 5,056,109 5,267,262 5,504,773 5,568,483 5,778,338 5,101,501 5,337,338 5,506,865 5,600,754 5,228,054 5,416,797 5,535,239 5,659,569 5,109,390 5,414,796 5,511,073 5,657,420 QUALCOMM 3G Copyright Trademarks 2008 Sierra Wireless. All rights reserved. Heart of the Wireless Machine is a registered trademark of Sierra Wireless. Watcher is a trademark of Sierra Wireless, registered in the European Community. Sierra Wireless, the Sierra Wireless logo, the red wave design, the red-tipped antenna, and TRU-Install are trademarks of Sierra Wireless. 4 2130961 Preface Windows is a registered trademark of Microsoft Corporation. QUALCOMM is a registered trademark of QUALCOMM Incorporated. Used under license. Macintosh is a trademark of Apple Inc., registered in the U.S. and other countries. Other trademarks are the property of the respective owners. Sales Desk:
Phone: 1-604-232-1488 Hours: 8:00 AM to 5:00 PM Pacific Time E-mail: sales@sierrawireless.com Contact Information Post: Sierra Wireless 13811 Wireless Way Richmond, BC Canada V6V 3A4 Fax: 1-604-231-1109 Web: www.sierrawireless.com Consult our website for up-to-date product descriptions, documentation, application notes, firmware upgrades, trouble shooting tips, and press releases:
www.sierrawireless.com Revision History Revision number Release date 1.0 April 2008 New document Changes Rev 1.0 Apr.08 5 Compass Series HSPA USB Modem Installation Guide 6 2130961 Contents Introducing the Compass USB Modem . 9 Services supported . 9 Your account and coverage area. 10 Compass USB modem software. 11 Frequency band support . 11 Getting Started . 13 Overview of installation steps . 13 System requirements . 13 Insert the SIM card . 14 Insert the Compass USB modem into the USB slot . 14 Connect to the network . 15 Attach the Compass USB modem to the lanyard . 16 Using your Compass USB Modem . 19 LEDs . 20 Removing a SIM card . 21 Using the microSD card. 21 Removing the microSD card . 23 Using the extension cable and laptop clip . 23 Connection management software . 24 Launching 3G Watcher . 25 The 3G Watcher window . 25 Indicators in 3G Watcher . 27 Status icons . 27 Turning the radio on and off . 27 Frequency band and network selection . 27 Reinstalling the software . 28 Rev 1.0 Apr.08 7 Compass Series HSPA USB Modem Installation Guide Care and Maintenance of Your Compass USB Modem . 31 Technical Specifications . 33 Radio frequency and electrical specifications . 33 Environmental specifications . 34 Regulatory and Safety Information . 35 Important notice . 35 Safety and hazards . 35 Important safety/compliance information for North American users. 36 Information pertaining to OEM customers . 38 EU regulatory conformity. 39 Index. 41 8 2130961 1: Introducing the Compass USB 1 Modem Services supported Your account and coverage area Compass USB modem software Frequency band support The Compass USB third generation (3G) wireless modem enables you to connect to the Internet, send and receive email, connect to a corporate network or virtual private network
(VPN), or view streaming video, without the need for a cable. The modem fits into Type A USB ports. The Compass USB modem is TRU-Install enabled. All the required software is on the modem. When you set up your modem, the software is installed on your computer. You do not need an installation CD. The modem has a built-in antenna plus an external jack for a remote antenna. A slot on the end of the modem accommo dates a microSD external memory card. Depending on your service provider, a microSD card may be included in your package, or you may need to purchase it separately. Services supported The services supported on your Compass USB modem depend on the model and your service provider. (Contact your service provider and visit www.sierrawireless.com for details.) GPRS, EDGE, UMTS, and HSDPA/HSUPA service support GPRS, EDGE, UMTS, and HSDPA/HSUPA are add-on data services to Global System for Mobile Communications (GSM) mobile phone networks. Maximum theoretical data speeds are:
High Speed Download Packet Access (HSDPA)up to 7.2 Megabits per second (Mbps) High Speed Upload Packet Access (HSUPA)up to 2.0 Mbps Concurrent HSDPA/HSUPA (HSPA)up to 3.6 Mbps download and up to 1.5 Mbps upload Universal Mobile Telecommunications System (UMTS) 384 kilobits per second (kbps) Rev 1.0 Apr.08 9 Compass Series HSPA USB Modem Installation Guide Enhanced Data rates for GSM Evolution (EDGE) 236 kbps General Packet Radio Service (GPRS)56 kbps GPRS and EDGE are second generation (2G) data services. UMTS and HSDPA/HSUPA are 3G data services. When establishing a connection, your Compass USB modem uses the fastest available service. If, for example, you are using a Compass USB modem in an area that has GPRS and EDGE service but not UMTS or HSDPA/HSUPA service, the Compass USB modem connects using EDGE service. Once the connection is established, you have access to all Internet services. Your account and coverage area You must have an account with a GSM service provider to use the Compass USB modem. To use the modems 3G capability, your account must be with a service provider that offers HSDPA/HSUPA or UMTS service. (The Compass USB modem is backwards compatible with 2G service.) When you obtain your account, you are given a Subscriber Identity Module (SIM) card containing account information. Before you use the Compass USB modem, you must insert the SIM card into it. Your ability to obtain service depends on these factors:
GSM network coverageYou must be within the coverage area of a GSM network. Service providerIf you are within the coverage area of a network that is not operated by your own service provider, you can obtain service only if there is a roaming agreement between your service provider and the network operator. Account provisionsYour account may restrict your usage to certain networks or limit the amount of time you can use the network. Frequency bandYou cannot connect to networks operating in bands not supported by your Compass USB modem, regardless of roaming agreements or account provisions. Most service providers have coverage maps on their web sites. Note: If you purchased the Compass USB modem from a GSM service provider, you may already have an account and a SIM card. Otherwise, your retailer should be able to give you the names of companies that provide these items. Note: The fee for service is usually higher when you are roaming (connected to a network other than the one belonging to your service provider). 10 2130961 Introducing the Compass USB Modem Compass USB modem software The Compass USB modem comes with connection management software. Depending on your carrier, it may come with carrier-specific software or the following software made by Sierra Wireless:
3G Watcher for Windows. Use this software to manage the Compass USB modem and monitor your connections. Driver software that forms the interface between the Compass USB modem and your Windows operating system For information on Watcher features and using Watcher, see Connection management software on page 24. Frequency band support Frequency bands supported by the Compass USB modem:
Technology Bands Location 2G 850 MHz (cellular band) North America 900 MHz 1800 MHz Europe Europe and Asia 1900 MHz (PCS band) North America 3G WCDMA 800 WCDMA 850 WCDMA 1900 WCDMA 2100 Japan North America and Australia North America Europe, Asia, and Australia Rev 1.0 Apr.08 11 Compass Series HSPA USB Modem Installation Guide 12 2130961 2: Getting Started 2 Note: Keep a written record in a secure place of the account information that your service provider gives you. Note: If you are running Mac OS X, please refer to the Watcher Quick Start Guide for Mac OS X found at www.sierrawireless.com/mac. Follow the instructions in this chapter to set up and start using your Compass USB modem. To use your Compass USB modem, youll need:
An account with a service provider A SIM card (supplied by the service provider) A profile, which may be:
Already stored on your modem when you purchase it Set up automatically Selected from a drop-down list Created manually Overview of installation steps 1. Check the system requirements. 2. 3. Insert the SIM card. Insert the Compass USB modem into your computers USB port. (The necessary software is installed and either the profile is set up automatically or Watcher prompts you to create a profile.) System requirements The Compass USB modem is supported on:
Windows Vista Windows XP (Home and Professional versions) Windows 2000 Macintosh OS X 10.4.11 or later To install the Compass USB modem, you require the following:
USB port 1 USB Type A slot (USB 1.1 or 2.0) I/O resources 1 IRQ, 40 bytes I/O space Memory 32 MB Rev 1.0 Apr.08 13 Compass Series HSPA USB Modem Installation Guide Note: To prevent the SIM card from becoming jammed in its slot, ensure the edge of the card is smooth before inserting it. Do not attach labels to your SIM card as this may also cause it to jam. Note: If you are running Windows 2000, Windows Installer Redistrib-
utable 2.0 must be installed. This is available on the Microsoft web site, www.microsoft.com. Insert the SIM card 1. If your SIM card is attached to a larger card, detach the SIM card and remove any fragments stuck to it. 2. Remove the cap from the end of the Compass USB 3. 4. modem. If there is a non-functional SIM card in the upper slot:
a. Press it in and then release it. b. Gently remove the non-functional SIM card. Insert the SIM card into the top slot, as shown in the illus tration. The SIM card clicks into place. Insert the Compass USB modem into the USB slot 1. Gently insert the modem into the USB slot. Note: Users of Windows 2000 must be logged in with adminis-
trative privileges. Users of Windows XP may require admin-
istrative privileges. 14 2130961 Note: Do not forcefully insert the Compass USB modem as you may damage connector pins. Getting Started Note: Do not insert the Compass USB modem into a USB hub or a USB slot on a keyboard. The Compass USB modem comes with TRU-Install, a Sierra Wireless feature that installs the necessary software the first time you insert the Compass USB modem into your computer. (You do not need an installation CD.) 2. The installation process starts automatically when you insert the modem. If it does not, select Start > Run and type d:\setup.exe (where d is your TRU-Install CD-ROM drive letter1). 3. Follow the on-screen instructions. Note: Do not remove the modem until the software installation is complete. If you have inadvertently removed the modem too soon, see Reinstalling the software on page 28. Connect to the network To use your account (and connect to your service providers network), you need to have at least one profile set up on your modem. Depending on how your modem is configured, the profile may already be set up or you may need to create one. Scenario Required action Watcher automatically detects or creates a default profile. Click Connecta . Watcher prompts you to create a data profile. 1. Click Yes, then.... If Watcher opens the Options window Profile pane and pre-selects an appropriate profile
(normally the name of your service provider) from the drop-down list... If Watcher opens the Options window Profile pane, the Profile name field is blank, and your service provider is not included in the drop-down list... a. Click OK to accept that profile (or choose another from the drop-down list). b. Click Connecta . You need to create a profile manually. Refer to the Watcher online help for details. a. The first time you insert the modem in the computer, it takes a few seconds for the modem to locate the net work. While it is scanning for a network, the Connect button is unavailable. 1. The drive appears as a CD-ROM drive, even though there is no physical CD required for installation. Rev 1.0 Apr.08 15 Compass Series HSPA USB Modem Installation Guide Once the software is successfully installed and the profile is set up, the Compass USB modem is ready to use. Anytime you use the Compass USB modem with the same computer, TRU-Install verifies that the correct software is already installed. This process takes a few seconds. If you need to re-install the software, see page 28. For information on using Watcher, see Connection management software on page 24 or consult the Online Help that comes with Watcher (from the main window, select Help >
Help Topics). Attach the Compass USB modem to the lanyard To keep everything together, thread the lanyard through the cap and the modem, as shown in the illustrations. 16 2130961 Getting Started You can also attach the lanyard to the cap. Rev 1.0 Apr.08 17 Compass Series HSPA USB Modem Installation Guide 18 2130961 3: Using your Compass USB 3 Modem Removing a SIM card Using the microSD card Connection management software Your HSPA Compass USB modem has connectors for an external antenna and a USB port. It also has slots for a SIM card and a microSD external storage card. LEDs on the front of the modem provide status information. Cap microSD card and SIM card slots External antenna connector USB connector Data LED Power LED Rev 1.0 Apr.08 19 Compass Series HSPA USB Modem Installation Guide LEDs The Compass USB modem has two LEDs that show the current status of the modem. LED State Indicates Power Off Indicates one of the following states:
The modem is not inserted in the computer. The computer is off or in suspend and resume mode. The modem radio has been turned off using Watcher (Tools > Turn Radio Off) or another connection client. Solid Blue The power is on, the modem is working normally. Blinking Blue The firmware is being updated. Do not remove the modem from the computer. Blinking Amber The modem is searching for service (initializing). Solid Amber Modem erroreither the modem is having a problem initializing (searching for service) or is offline because of a failure. Contact your service provider. Data Off The modem is unable to detect 2G or 3G service. Blinking Amber The modem has detected a 2G network (EDGE, GPRS, GSM) and is ready to connect. Solid Amber The modem is connected to a 2G network and is able to send and receive data. Blinking Blue The modem has detected a 3G network (UMTS, HSPA) and is ready to connect. Solid Blue The modem is connected to a 3G network and can send and receive data. 20 2130961 Using your Compass USB Modem Removing a SIM card Chapter 2 provides instructions for inserting the SIM. To remove the SIM card from the Compass USB modem:
1. Remove the cap. 2. Push the SIM card in and then release it. 3. Remove the SIM card. Using the microSD card The Compass USB modem is built to accommodate a microSD external storage card. Note: Complete the software installation before using a microSD card. See Getting Started on page 13. Rev 1.0 Apr.08 21 Compass Series HSPA USB Modem Installation Guide To use a microSD card:
1. If there is a non-functional microSD card in the lower slot:
a. Press it in and then release it. b. Gently remove the non-functional microSD card. Insert the microSD card into the lower slot at the end of the modem, as shown in the illustration. 2. SIM card slot microSD card slot 3. Insert the Compass USB modem into the computers USB slot. If the computer does not have Watcher installed, you may be given the option to install it. If you do not want to install Watcher, cancel the installation. You can use the microSD without having Watcher installed. The microSD card appears as an external drive. You can copy, paste, and drag files to and from it the same way as you can with any other external drive. 22 2130961 Using your Compass USB Modem Removing the microSD card Tip: To help conserve battery life, remove the microSD card when you are not using it. To remove the microSD card:
1. Remove the cap. 2. Push the microSD card in and then release it. 3. Gently pull the microSD card out. Using the extension cable and laptop clip Depending on your service provider, your Compass USB modem may come with an extension cable and clip. The clip fits on the top of your laptop and holds your Compass USB modem. In some areas, using the clip will improve the perfor mance of your modem. To use the extension cable and clip:
1. Place the clip on top of the laptop. 2. Connect the extension cable to the modem. Rev 1.0 Apr.08 23 Compass Series HSPA USB Modem Installation Guide 3. Place the modem in the clip holder. 4. Connect the other end of the extension cable to the USB slot on your computer. Clip Compass USB modem Extension cable Note: Your clip may look slightly different from the one shown in the illustration. Connection management software Your Compass USB modem comes with Sierra Wireless 3G Watcher or other connection management software, depending on your carrier. Note: 3G Watcher is also compatible with earlier Sierra Wireless modems such as the AirCard 88xU USB modem, AirCard 88xE ExpressCard modem, and the AirCard 88x PC card modem. 3G Watcher enables you to:
Initiate data connections Determine signal strength, roaming status, GPRS, EDGE, UMTS, or HSDPA/HSUPA availability, and other network connection parameters Monitor the status of the Compass USB modem and GSM service Send and receive SMS messages Enable or disable SIM security that prevents others from using your SIM card if it is lost or stolen 24 2130961 Using your Compass USB Modem Set options related to notifications and the 3G Watcher window Create or modify an account profile You do not need to run 3G Watcher when you use the Compass USB modem, but 3G Watcher does provide useful status information. Launching 3G Watcher Unless this feature has been disabled, 3G Watcher launches automatically anytime you insert the Compass USB modem. You can also launch 3G Watcher by:
Double-clicking the desktop shortcut Selecting Start > Programs > Sierra Wireless > 3G Watcher >
, or 3G Watcher Depending on how your profile is configured, your browser, VPN, or other program may launch automatically anytime you launch 3G Watcher. The 3G Watcher window Note: To view the online Help in 3G Watcher, select Help > Help Topics. You can also display help by pressing <F1>. GPRS, EDGE, UMTS, or HSDPA/HSUPA coverage Roaming Compact view Signal strength Service Provider Connect/Disconnect button Profile drop-down list Device status. If an icon of the Compass USB modem with an X is displayed, 3G Watcher is unable to detect the modem. This indicates that the modem is not fully inserted into the computer or the device is powered down. You may be able to resolve this problem by restarting 3G Watcher, stopping, removing, and reinserting the Compass USB modem, or restarting your computer. Rev 1.0 Apr.08 25 Compass Series HSPA USB Modem Installation Guide Signal strength and service status. The number of bars beside the antenna increases as signal strength increases, to a maximum of five bars. The ToolTip that displays when you position the mouse pointer over this indicator shows the numeric value of the RSSI (Received Signal Strength Indication) in dBm. An antenna with a line through it indicates no service is available (Not in Service). You are outside of the coverage area or have insufficient signal strength to maintain a GSM data connection. Coverage. The icon indicates the fastest service that is:
- Available in your current coverage area.
- Supported by your Compass USB modem. HSPA iconconcurrent HSDPA and HSUPA HSUPA iconHigh-Speed Uplink Packet Access (HSUPA) HSDPA iconHigh-Speed Downlink Packet Access (HSDPA) 3G iconUniversal Mobile Telecommunications System (UMTS) EDGE iconEnhanced Data rates for GSM Evolution (EDGE) GPRS iconGeneral Packet Radio Service
(GPRS) When only the letters are displayed, (for example
), you are within the coverage area, but have not yet acquired the service. When the indicator has an outline (
and are able to establish a data connection.
), you have acquired service When the indicator is filled (
wireless service.
), you have a data connection on the Roaming. You are connected to a network other than your local service provider's. There may be a surcharge for roaming service.
(Support for roaming depends on your service provider.) New SMS message. Click the icon to open the SMS Express window and read your messages. When your SIM becomes full, this icon flashes and turns red. 26 2130961 Using your Compass USB Modem Indicators in 3G Watcher Data transmission. When the modem is connected to the network, the main 3G Watcher window shows the amount of data received and sent. Status icons These icons appear in the system tray (usually in the lower right corner of your screen). Watcher cannot detect the Compass USB modem. Ensure that the Compass USB modem is inserted properly and powered on. You do not have an active high-speed connection. You have an active high-speed connection. You have new (unread) SMS messages. Turning the radio on and off This option allows you to conserve your computers battery by turning off the Compass USB modems radio transmitter/
receiver when you are not using it. To turn off the radio:
1. Select Tools > Turn Radio Off. When the radio is turned off, the menu option switches to Turn Radio On and the message Radio is off is displayed in the 3G Watcher window. To turn on the radio:
1. Select Tools > Turn Radio On. Frequency band and network selection 3G Watcher has two options that affect your ability to obtain GPRS, EDGE, UMTS, or HSDPA/HSUPA service:
The frequency band you want to use The network you want to use, if you are within the coverage area of more than one network Rev 1.0 Apr.08 27 Compass Series HSPA USB Modem Installation Guide Frequency band selection Every GSM network operates on one set of frequency bands. The Compass USB modem is designed to change frequency bands automatically to obtain network service. You can also change frequency bands manually from the Network tab of the User Options window (Tools > Options > Network). Note: Unless your service provider specifies otherwise, it is recom-
mended that you use the Automatic setting. Network selection This option is set in the Network pane of the User Options window (Tools > Options > Network > Network Selection Mode). Depending on your location, you may be within the coverage area of several networks. Your ability to obtain service on each network depends on your account. Your options for network selection are:
AutomaticThe Compass USB modem automatically selects a network based on your account and network availability. ManualThe Compass USB modem scans the area and displays a list of detected GSM networks. If you select a network on which you cannot obtain service, the message, Failed to register with network appears. Choose a different network. More information is available in the Watcher Online Help. From the main Watcher window, select Help > Help Topics. Reinstalling the software If you need to reinstall or repair the 3G Watcher software:
1. Open the Control Panel. 2. Double-click TRU-Install. 3. Follow the on-screen instructions. Or, in Watcher:
1. Select Tools > Software Installation Mode. 2. Follow the on-screen instructions. 28 2130961 Using your Compass USB Modem If you have canceled the software installation process or removed the modem from the computer before the software installation process was complete, you may receive error messages when you try to reinstall the software. If that happens:
1. Go to Start > Control Panel > Add or Remove Programs and remove TRU-Install. Insert the modem into the computer. 2. Note: Do not remove the modem until the software installation process is complete. Rev 1.0 Apr.08 29 Compass Series HSPA USB Modem Installation Guide 30 2130961 4: Care and Maintenance of Your Compass USB Modem 4 As with any electronic device, the Compass USB modem must be handled with care to ensure reliable operation. Follow these guidelines when you use and store your Compass USB modem:
Do not apply adhesive labels to the SIM card. This may cause it to jam inside the slot, or prevent it from being inserted properly. When not installed in your computer, store the Compass USB modem and SIM card in a safe place. The Compass USB modem should fit easily into your computers USB port. Forcing the Compass USB modem into the port may damage the connector pins. Protect the Compass USB modem from liquids, dust, and excessive heat. (See the Environmental specifications on page 34 for maximum tolerances.) Rev 1.0 Apr.08 31 Compass Series HSPA USB Modem Installation Guide 32 2130961 5: Technical Specifications 5 Radio frequency and electrical specifications Table 5-1: Radio frequency and electrical specifications Compliance Transmit Receive GSM Release 6 GSM 1900 (PCS): 1850 to 1910 MHz GSM 1800 (DCS):1710 to 1785 MHz EGSM 900: 880 to 915 MHz GSM 850: 824 to 849 MHz WCDMA 2100 (Band I): 1920 to 1980 MHz WCDMA 1900 (Band II): 1850 to 1910 MHz WCDMA 850 (Band V): 824 to 849 MHz GSM 1900 (PCS): 1930 to 1990 MHz GSM 1800 (DCS): 1805 to 1880 MHz EGSM 900: 925 to 960 MHz GSM 850: 869 to 894 MHz WCDMA 2100 (Band I): 2110 to 2170 MHz WCDMA 1900 (Band II): 1930 to 1990 MHz WCDMA 850 (Band V): 869 to 894 MHz Channel spacing 200 kHz (GSM) 5 MHz (WCDMA) Channel raster Frequency stability 200 kHz 0.1 ppm Rev 1.0 Apr.08 33 Compass Series HSPA USB Modem Installation Guide Environmental specifications Operating temperature Storage temperature Humidity Vibration 0C to +50C
(+32F to +122F)
-20C to +85C
(-4F to +185F) 85%, non-condensing Random vibration, 10 to 1000 Hz, nominal 6G RMS in each of 3 mutually perpendicular axes. Test duration of 60 minutes for each axis, for a total test time of 3 hours (non-operating). Drop 1 m on concrete on each of 6 faces, 2 times 34 2130961 6: Regulatory and Safety Information 6 Important notice Because of the nature of wireless communications, trans mission and reception of data can never be guaranteed. Data may be delayed, corrupted (that is, have errors), or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Sierra Wireless modem are used in a normal manner with a well-constructed network, the Sierra Wireless modem should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Sierra Wireless and its affiliates accept no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Sierra Wireless modem, or for failure of the Sierra Wireless modem to transmit or receive such data. Safety and hazards The Compass USB modem MUST BE POWERED OFF in all areas that may be susceptible to radio interference, in particular:
Prohibited areas Obey all signs and notices and follow all rules and regula tions. Power off the Compass 885 USB modem when instructed to do so or when you suspect that it may cause interference or danger. In areas where blasting is in progress Where explosive atmospheres may be present Areas with a potentially explosive atmosphere are not always clearly marked. Such areas include gas stations, fuel depots, chemical transfer or storage facilities, areas where blasting is in progress, areas where the air contains chemicals or particles such as grain, dust, or metal pow ders, and any other area where you would normally be advised to turn off your cellular phone or vehicle engine. Near medical or life-support equipment Medical equipment may be susceptible to any form of radio interference. In such areas the Compass 885 USB modem can transmit signals that could interfere with this equipment. Rev 1.0 Apr.08 35 Compass Series HSPA USB Modem Installation Guide On board aircraft In addition to Federal Aviation Authority (FAA) require ments, many airline regulations state that you must sus pend wireless operations before boarding an aircraft. The Compass 885 USB modem is capable of transmitting sig nals that could interfere with various onboard systems and controls. Failure to observe this instruction may lead to suspension or denial of cellular telephone services to the offender, legal action, or both. Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open. The Compass 885 USB modem may be used normally at this time. While operating a vehicle The driver or operator of any vehicle should not use a wireless data device while in control of a vehicle. Doing so detracts from the driver or operator's ability to control and operate the vehicle. In some countries, using such commu nications devices while in control of a vehicle is an offence. Important safety/compliance information for North American users CAUTION: Unauthorized modifications or changes not expressly approved by Sierra Wireless, Inc. could void compliance with regulatory rules, and thereby your authority to use this equipment. The design of the Compass 885 USB modem complies with U.S. Federal Communications Commission (FCC) and Industry Canada (IC) guidelines respecting safety levels of radio frequency (RF) exposure for portable devices, which in turn are consistent with the following safety standards previ ously set by Canadian, U.S. and international standards bodies:
ANSI/IEEE C95.1-1999, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromag-
netic Fields, 3kHz to 300 GHz National Council on Radiation Protection and Measure ments (NCRP) Report 86, -1986, Biological Effects and Exposure Criteria for Radio Frequency Electromagnetic Fields 36 2130961 Regulatory and Safety Information Health Canada, Safety Code 6, 1999, Limits of Human Exposure to Radio frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz International Commission on Non-Ionising Radiation Protection (ICNIRP) 1998, Guidelines for limiting exposure to time-varying electric, magnetic, and electromagnetic fields (up to 300 GHz) These devices are only authorized to be used in laptop computers that are identical or substantially similar to those in its grant application. These devices comply with Part 15 of the FCC Rules. Operation is subject to the condition that these devices do not cause harmful interference. Where appropriate, the use of the equipment is subject to the following conditions:
Warning: (EMI) United States FCC Information This equipment has been tested and found to comply with the limits pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in an appropriate installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help Rev 1.0 Apr.08 37 Compass Series HSPA USB Modem Installation Guide If you have purchased this product under a United States Government contract, it shall be subject to restrictions as set forth in subparagraph (c)(1)(ii) of Defense Federal Acquisitions Regulations (DFARs) Section 252.227-7013 for Department of Defense contracts, and as set forth in Federal Acquisitions Regulations (FARs) Section 52.227-19 for civilian agency contracts or any successor regulations. If further government regulations apply, it is your responsibility to ensure compliance with such regulations. Information pertaining to OEM customers The Compass 885 USB wireless modem has been granted modular approval for mobile applications. Integrators may use the Compass 885 USB wireless modem in their final products without additional FCC/IC certification if they meet the following conditions. Otherwise, additional FCC/IC approvals must be obtained. 1. At least 20 cm separation distance between the antenna and the users body must be maintained at all times. 2. The Compass 885 USB wireless modem and its antenna must not be colocated with any other transmitter or antenna within a host device. 3. A user manual with the end product must clearly indicate the operating requirements and conditions that must be observed to ensure compliance with current FCC/IC RF exposure guidelines. 4. The end product with an embedded Compass 885 USB wireless modem must pass the unintentional emission testing and properly authorized per FCC Part 15 require ments where applicable. Note: If these wireless modems are intended for use in a portable device, you are responsible for separate approval to satisfy the SAR requirements of FCC Part 2.1093 and IC RSS-102. 5. To comply with FCC/IC regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum antenna gain must not exceed 5 dBi in the Cellular band and 4 dBi in the PCS band. 6. A label must be affixed to the outside of the end product into which the Compass 885 USB wireless modem is incor porated, with a statement similar to the following:
This device contains FCC ID: N7NC885. This equipment contains equipment certified under IC:
2417C-C885. 38 2130961 Regulatory and Safety Information EU regulatory conformity Sierra Wireless hereby declares that the Compass 885 USB wireless modem conforms to all the essential requirements of Directive 1999/5/EC:
The Declaration of Conformity made under Directive 1999/5/
EC is available for viewing at the following location in the EU community:
Sierra Wireless (UK), Limited Lakeside House 1 Furzeground Way, Stockley Park East Uxbridge, Middlesex UB11 1BD England Rev 1.0 Apr.08 39 Compass Series HSPA USB Modem Installation Guide 40 2130961 Index Numerics 3G Watcher introduction, 24 launching, 25 A account, 10 antenna description, 9 icon, 26 C channel raster, 33 channel spacing, 33 clip, 23 Compass USB modem, inserting, 14 connect to the network, 15 coverage, 26 coverage area, 10 D data transmission, 27 device not available, 25 device not responding, 25 driver, 11 E EDGE connection status, 26 indicator, 26 electrical specifications, 33 envelope icon main window, 26 system tray, 27 environmental specifications, 34 error messages, 29 extension cable, 23 external memory storage, 9, 21 external SD, 9, 21 external storage card, 21 frequencies receive, 33 transmit, 33 frequency stability, 33 G GPRS connection status, 26 indicator, 26 H HSDPA connection status, 26 indicator, 26 HSDPA / HSUPA connection status, 26 HSDPA / HSUPA indicator, 26 HSPA connection, 26 HSUPA connection status, 26 HSUPA indicator, 26 humidity, 34 I I/O space (input/output space), 13 icon antenna, 26 device status, 25 roaming, 26 signal strength, 26 SMS message, 26 indicator device status, 25 EDGE coverage, 26 GPRS coverage, 26 HSDPA / HSUPA coverage, 26 HSDPA coverage, 26 HSUPA coverage, 26 roaming, 26 signal strength, 26 SMS message, 26 status, 27 UMTS coverage, 26 installing, error messages, 29 IRQ (interrupt request), 13 F flash drive, 21 L lanyard, 16 laptop clip, 23 launching 3G Watcher, 25 Rev 1.0 Apr.08 41 Compass Series HSPA USB Modem Installation Guide LEDs, 20 M Macintosh OSX support, 13 memory card, 9 memory required, 13 micro external memory card, 21 microSD, 9, 21 modem, inserting, 14 N network overview, 10 selection, 28 O online help, 25 operating systems supported, 13 P power options, power up/down, 27 profile, 13, 15 R radio frequency specifications, 33 receive frequencies, 33 regulatory information, 35 remote antenna, 9 requirements, software, 14 RF specifications, 33 roaming, 10 roaming indicator, 26 RSSI, 26 S safety notice, 35 service, 26 HSDPA, 26 UMTS, 26 signal strength indicator, 26 SIM card inserting, 14 removing, 21 SMS messages indicator, 26 status, 27 software installation, 15 software requirements, 14 specifications, 33 34 electrical, 33 environmental, 34 radio frequency, 33 status concurrent HSDPA / HSUPA service, 26 connection, 27 data transmission, 27 device, 25 EDGE connection, 26 EDGE service, 26 GPRS connection, 26 GPRS service, 26 HSDPA / HSUPA, 26 HSDPA connection, 26 HSDPA service, 26 HSUPA connection, 26 HSUPA service, 26 roaming, 26 signal strength, 26 SMS messages, 26, 27 system tray icons, 27 UMTS connection, 26 UMTS service, 26 storage temperature, 34 when not using card, 31 system requirements, 13 system tray icons, 27 T technical specifications, 33 34 temperature, 34 transmit frequencies, 33 triangle icon, 26 TRU-Install, 9, 15, 15 U UMTS connection status, 26 UMTS indicator, 26 USB port requirements, 13 V vibration, 34 W Watcher icons and indicators, 27 main window, 25 Watcher, description, 11 Windows 2000 support, 13 Windows Vista support, 13 Windows XP support, 13 42 2130961