SENSIT 3 USER MANUAL Table of contents Table of contents ..................................................................................................................................... 1 SENSIT 3 - 5 SENSORS, ONE BUTTON, SO MANY POSSIBILITIES ............................................................ 1 DEVICE ACTIVATION ................................................................................................................................ 1 USER INSTRUCTIONS ............................................................................................................................... 1 AVAILABLE MODES .................................................................................................................................. 2 TECHNICAL SPECIFICATIONS .................................................................................................................... 2 SENSIT FOR DEVELOPERS ....................................................................................................................... 3 SENSIT 3 - 5 SENSORS, ONE BUTTON, SO MANY POSSIBILITIES Sensit is a configurable multi-sensor device: you can adapt it to many use cases, and build your own usage. The number of sensors it provides, along with its ability to communicate wherever there is Sigfox coverage, open it to a wide array of possibilities. DEVICE ACTIVATION It only takes a few minutes to get started with your Sensit:
1. Visit www.sensit.io and click on Start with my Sensit. 2. Use the ID that is printed on the back of the Sensit. 3. Make a long press (two seconds) on the button to change mode and send a message. The main LED will turn light up in the color of the chosen mode (see below). 4. Wait until the LED blinks: this shows that data is being transmitted. 5. You can now access your sensit.io dashboard and see the transmitted data. USER INSTRUCTIONS The Sensit is easy to configure:
1. Select the mode you want to use (see below). 2. Place the Sensit on asset or in the location about which you want information and leave it. or press the Sensit button twice to send data. 3. Keep track of your data on the online dashboard. or receive notifications when a threshold is passed. The Sensit button has a different action depending on how it is pressed:
Indicate the current mode: one short press. The LED will blink in the current mode color.
-
- Change mode: one long press. The LED changes color depending on the active mode. You can keep pressing the button and it will keep switching mode until you stop. Once a mode is chosen, the Sensit sends data. Send data with the current measurement: 2 short presses. This can be used to send an alert.
-
- Reset the Sensit: 4 shorts presses (in Button mode only). The Sensit returns to factory settings. AVAILABLE MODES The Sensit can be configured in 6 different modes. Each mode has a specific color:
- Green: Temperature and Humidity mode. The Sensit sends sensor data at a defined frequency.
- Yellow: Light mode. The Sensit either sends light sensor data at a defined frequency.
-
Light blue: Door opening detection. The Sensit is affixed to a door, and sends data every time the door is being opened (through its magnetometer).
- Dark blue: Vibration detection. The Sensit sends data every time the accelerometer has detected a movement.
- Pink: Magnet mode. The Sensit sends data every time a magnet is put near the right side of the Sensit.
- White: Button mode. The Sensit sends data every time the button is pressed. You can change mode by doing a long press on the button. The sending frequency can be defined on the online app: every 10 minutes, every hour, every 6 hours, every 24 hours. You can also trigger an immediate data transmission by making two short presses on the button. By default, only one mode can be selected at a time. TECHNICAL SPECIFICATIONS RADIO CHARACTERISTICS 3.1 3.2 3.3 3.4 TX frequency 868.13 MHz 902.2 MHz 923.2 MHz 920.8 MHz RX frequency 869.525 MHz 905.2 MHz 922.2 MHz 922.3 MHz TX power 14 dBm 22 dBm 7 dBm 22 dBm Sigfox Ready class U0 U0 U1 U0 MECHANICAL CHARACTERISTICS
- Dimensions (W x H x D): 52 mm x 82 mm x 15 mm
- Weight: 50 g
-
Solid particle protection: IP54 ENVIRONMENTAL CHARACTERISTICS
- Operating temperature: -10 C to +55 C
- Relative humidity: 30 % to 90 %
-
Storage temperature: -20 C to +75 C POWER SUPPLY CHARACTERISTICS
- Battery type: LiPo
-
- Recharge: 5 V, via USB Technical characteristics: 250 mAh, 3.7 V SENSIT FOR DEVELOPERS Sensit introduces everyone to the possibilities of Sigfox through a configurable end-to-end solution. With the Sensit SDK, developers can use their Sensit as a devkit, build their own firmware, have access to the Sigfox Cloud all that with Sigfox connectivity included!
Learn more about the Sensit SDK on www.sensit.io!