all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
Installation Instructions | Users Manual | 3.69 MiB | ||||
1 2 3 |
|
User Manual | Users Manual | 472.44 KiB | ||||
1 2 3 |
|
Cover Letters | Cover Letter(s) | 62.76 KiB | April 29 2020 | |||
1 2 3 | Operational Description | Operational Description | April 29 2020 | confidential | ||||
1 2 3 |
|
RF exposure info | RF Exposure Info | 104.25 KiB | April 29 2020 | |||
1 2 3 |
|
Test Report | Test Report | 3.98 MiB | April 29 2020 | |||
1 2 3 |
|
Test setup Photos | Test Setup Photos | 4.02 MiB | April 29 2020 | |||
1 2 3 | Block Diagram | Block Diagram | October 15 2018 | confidential | ||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Parts List | Parts List/Tune Up Info | October 15 2018 | confidential | ||||
1 2 3 | Cover Letter(s) | October 18 2018 | ||||||
1 2 3 | Schematics | Schematics | October 15 2018 | confidential | ||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Test Setup Photos |
1 2 3 | Installation Instructions | Users Manual | 3.69 MiB |
BGM13P Blue Gecko Bluetooth Module Data Sheet The BGM13P Blue Gecko Bluetooth Module (BGM13P) is a small form factor, certified module, enabling rapid development of Bluetooth Low Energy solutions. KEY FEATURES Based on the Silicon Labs EFR32BG13 Blue Gecko SoC, the BGM13P combines an en-
ergy- efficient, Bluetooth wireless SoC with a proven RF/antenna design and Bluetooth 5 compliant Bluetooth stack. This integration accelerates time-to-market and saves months of engineering effort and development costs. In addition, common software and develop-
ment tools enable seamless migration between modules, SIPs and SoC based designs. BGM13P modules can be used in a wide variety of applications:
IoT end devices and gateways Health, sports and wellness devices Industrial, home and building automation Smart phone, tablet and PC accessories Beacons Bluetooth 5 low energy compliant Integrated antenna or U.FL connector TX power up to 8 dBm RX sensitivity: -95 dBm Range: up to 200 meters 32-bit ARM Cortex-M4 core at 38.4 MHz Flash memory: 512 kB RAM: 64 kB Autonomous Hardware Crypto Accelerator and Random Number Generator Integrated DC-DC Converter Onboard Bluetooth stack Core / Memory ARM CortexTM M4 processor with DSP extensions, FPU and MPU Flash Program Memory Crystals 38.4 MHz Clock Management Energy Management H-F Crystal Oscillator H-F RC Oscillator Auxiliary H-F RC Oscillator L-F RC Oscillator Voltage Monitor Power-On Reset Voltage Regulator DC-DC Converter Brown-Out Detector Other CRYPTO CRC True Random Number Generator SMU ETM Debug Interface RAM Memory LDMA Controller 32.768 kHz L-F Crystal Oscillator Ultra L-F RC Oscillator 32-bit bus Peripheral Reflex System Antenna Radio Transceiver Chip Antenna or U.FL Connector Matching N U L A B LNA I RF Frontend PA Q DEMOD PGA IFADC Frequency Synthesizer AGC MOD C R F C F U B C R C C A R Serial Interfaces USART Low Energy UARTTM I/O Ports Timers and Triggers Analog I/F External Interrupts General Purpose I/O Timer/Counter Protocol Timer Low Energy Timer Low Energy Sensor Interface I2C Pin Reset Pulse Counter Watchdog Timer Pin Wakeup Real Time Counter and Calendar Cryotimer ADC Analog Comparator IDAC Capacitive Touch VDAC Op-Amp Lowest power mode with peripheral operational:
EM0Active EM1Sleep EM2Deep Sleep EM3Stop EM4Hibernate EM4Shutoff silabs.com | Building a more connected world. Rev. 1.0 1. Feature List The BGM13P highlighted features are listed below. Low Power Wireless System-on-Chip. High Performance 32-bit 38.4 MHz ARM Cortex-M4 with DSP instruction and floating-point unit for efficient signal processing Embedded Trace Macrocell (ETM) for advanced debugging 512 kB flash program memory 64 kB RAM data memory 2.4 GHz radio operation TX power up to 8 dBm Low Energy Consumption 9.9 mA RX current 8.5 mA TX current at 0 dBm output power 87 A/MHz in Active Mode (EM0) 1.4 A EM2 DeepSleep current (full RAM retention and RTCC running from LFXO) 1.14 A EM3 Stop current (State/RAM retention) Wake on Radio with signal strength detection, preamble pattern detection, frame detection and timeout High Receiver Performance
-103.2 dBm sensitivity at 125 kbit/s GFSK
-95 dBm sensitivity at 1 Mbit/s GFSK
-91.2 dBm sensitivity at 2 Mbit/s GFSK Supported Protocols Bluetooth Low Energy (Bluetooth 5) Support for Internet Security General Purpose CRC True Random Number Generator (TRNG) 2 Hardware Cryptographic Accelerators (CRYPTO) for AES 128/256, SHA-1, SHA-2 (SHA-224 and SHA-256) and ECC Regulatory Certifications FCC CE IC / ISEDC MIC / Telec BGM13P Blue Gecko Bluetooth Module Data Sheet Feature List Wide selection of MCU peripherals 12-bit 1 Msps SAR Analog to Digital Converter (ADC) 2 Analog Comparator (ACMP) 2 Digital to Analog Converter (VDAC) 3 Operational Amplifier (Opamp) Digital to Analog Current Converter (IDAC) Low-Energy Sensor Interface (LESENSE) Multi-channel Capacitive Sense Interface (CSEN) 25 pins connected to analog channels (APORT) shared be-
tween analog peripherals 25 General Purpose I/O pins with output state retention and asynchronous interrupts 8 Channel DMA Controller 12 Channel Peripheral Reflex System (PRS) 2 16-bit Timer/Counter 3 or 4 Compare/Capture/PWM channels 1 32-bit Timer/Counter 3 Compare/Capture/PWM channels 32-bit Real Time Counter and Calendar 16-bit Low Energy Timer for waveform generation 32-bit Ultra Low Energy Timer/Counter for periodic wake-up from any Energy Mode 16-bit Pulse Counter with asynchronous operation 2 Watchdog Timer 3 Universal Synchronous/Asynchronous Receiver/Trans-
mitter (UART/SPI/SmartCard (ISO 7816)/IrDA/I2S) Low Energy UART (LEUART) 2 I2C interface with SMBus support and address recogni-
tion in EM3 Stop Wide Operating Range 1.8 V to 3.8 V single power supply Integrated DC-DC
-40 C to +85 C Dimensions 12.9 15.0 2.2 mm (W L H) silabs.com | Building a more connected world. Rev. 1.0 | 2 BGM13P Blue Gecko Bluetooth Module Data Sheet Ordering Information 2. Ordering Information Table 2.1. Ordering Information Ordering Code Protocol Stack BGM13P22F512GA-V2R BGM13P22F512GA-V2 BGM13P22F512GE-V2R BGM13P22F512GE-V2 Bluetooth Low Energy Bluetooth Low Energy Bluetooth Low Energy Bluetooth Low Energy Frequency Band
@ Max TX Power 2.4 GHz @ 8 dBm Antenna Built-in 2.4 GHz @ 8 dBm Built-in 2.4 GHz @ 8 dBm 2.4 GHz @ 8 dBm U.FL U.FL Flash
(kB) 512 512 512 512 RAM
(kB) GPIO Packaging 64 64 64 64 25 25 25 25 Reel Tray Reel Tray Devices ship with the Gecko UART DFU bootloader 1.4.1 + NCP application from Bluetooth SDK 2.7.0.0. The firmware settings con-
form to the diagram shown in 5.1 Network Co-Processor (NCP) Application with UART Host. silabs.com | Building a more connected world. Rev. 1.0 | 3
. Table of Contents
. 1. Feature List . 2. Ordering Information . 3. System Overview . 3.1 Introduction. 3.2 Radio. 3.3 Power
. 3.2.1 Antenna Interface
. 3.2.2 RFSENSE . 3.2.3 Packet and State Trace
. 3.2.4 Random Number Generator . 3.3.1 Energy Management Unit (EMU)
. 3.3.2 DC-DC Converter
. 3.3.3 Power Domains . 3.4 General Purpose Input/Output (GPIO). 3.5 Clocking . 3.5.1 Clock Management Unit (CMU) . 3.5.2 Internal Oscillators and Crystals. 3.6 Counters/Timers and PWM . 3.6.1 Timer/Counter (TIMER)
. 3.6.2 Wide Timer/Counter (WTIMER) . 3.6.3 Real Time Counter and Calendar (RTCC)
. 3.6.4 Low Energy Timer (LETIMER)
. 3.6.5 Ultra Low Power Wake-up Timer (CRYOTIMER) . 3.6.6 Pulse Counter (PCNT) . 3.6.7 Watchdog Timer (WDOG) . 3.7.1 Universal Synchronous/Asynchronous Receiver/Transmitter (USART) . 3.7.2 Low Energy Universal Asynchronous Receiver/Transmitter (LEUART) . 3.7.3 Inter-Integrated Circuit Interface (I2C) . 3.7.4 Peripheral Reflex System (PRS)
. 3.7.5 Low Energy Sensor Interface (LESENSE)
. 3.8.1 GPCRC (General Purpose Cyclic Redundancy Check) . 3.8.2 Crypto Accelerator (CRYPTO)
. 3.8.3 True Random Number Generator (TRNG)
. 3.8.4 Security Management Unit (SMU) . 3.9.1 Analog Port (APORT)
. 3.9.2 Analog Comparator (ACMP) . 3.9.3 Analog to Digital Converter (ADC) . 3.9.4 Capacitive Sense (CSEN) . 3.9.5 Digital to Analog Current Converter (IDAC) . 3.7 Communications and Other Digital Peripherals . 3.8 Security Features. 3.9 Analog . 2
. 3
. 7
. 7
. 7
. 7
. 8
. 8
. 8
. 9
. 9
. 9
.10
.10
.10
.10
.10
.11
.11
.11
.11
.11
.11
.11
.11
.12
.12
.12
.12
.12
.12
.12
.12
.13
.13
.13
.13
.13
.13
.13
.13
.14 silabs.com | Building a more connected world. Rev. 1.0 | 4
. 3.10 Reset Management Unit (RMU)
. 3.11 Core and Memory . 3.9.6 Digital to Analog Converter (VDAC)
. 3.9.7 Operational Amplifiers . 3.11.1 Processor Core . 3.11.2 Memory System Controller (MSC) 3.11.3 Linked Direct Memory Access Controller (LDMA)
. 3.12 Memory Map . 3.13 Configuration Summary . 4.1 Electrical Characteristics . 4. Electrical Specifications
. 4.1.1 Absolute Maximum Ratings . 4.1.2 Operating Conditions . 4.1.3 DC-DC Converter
. 4.1.4 Current Consumption . 4.1.5 Wake Up Times . 4.1.6 Brown Out Detector (BOD)
. 4.1.7 Frequency Synthesizer . 4.1.8 2.4 GHz RF Transceiver Characteristics . 4.1.9 Oscillators . 4.1.10 Flash Memory Characteristics . 4.1.11 General-Purpose I/O (GPIO)
. 4.1.12 Voltage Monitor (VMON) . 4.1.13 Analog to Digital Converter (ADC)
. 4.1.14 Current Digital to Analog Converter (IDAC)
. 4.1.15 Analog Comparator (ACMP)
. 4.1.16 I2C . 4.1.17 USART SPI
. 5. Typical Connection Diagrams
. 6. Layout Guidelines
. 5.1 Network Co-Processor (NCP) Application with UART Host . 5.2 SoC Application . 6.1 Module Placement and Application PCB Layout Guidelines
. 6.2 Effect of Plastic and Metal Materials . 6.3 Locating the Module Close to Human Body . 6.4 2D Radiation Pattern Plots
. 7. Hardware Design Guidelines
. 7.3.1 Programming and Debug Connections 7.3.2 Packet Trace Interface (PTI) . 7.1 Power Supply Requirements . 7.2 Reset Functions . 7.3 Debug and Firmware Updates . 14
.14
.14
.14
.14
.14
.14
.15
.16
. 17
.17
.18
.19
.20
.21
.24
.24
.25
.26
.29
.31
.32
.34
.35
.37
.39
.41
.44
. 46
.46
.46
. 47
.47
.48
.48
.49
.51
.51
.51
.51
.51
.51 silabs.com | Building a more connected world. Rev. 1.0 | 5 8. Pin Definitions . 8.1 BGM13P Device Pinout
. 8.2 GPIO Functionality Table . 8.3 Alternate Functionality Overview . 8.4 Analog Port (APORT) Client Maps . 9.1 BGM13P Dimensions . 9.2 BGM13P Module Footprint 9.3 BGM13P Recommended PCB Land Pattern
. 9. Package Specifications
. 10. Tape and Reel Specifications . 10.1 Tape and Reel Specification
. 10.2 Reel Material and Dimensions . 10.3 Module Orientation and Tape Feed . 10.4 Cover Tape Information . 11.1 Soldering Recommendations . 11. Soldering Recommendations . 12. Certifications . 12.1 Qualified Antenna Types . 12.2 Bluetooth . 12.3 CE . 12.4 FCC. 12.5 ISED Canada 12.6 Japan . 13. Revision History. 52
.52
. 54
.64
. 74
. 83
. 83
. 83
. 84
. 85
.85
. 85
. 86
. 86
. 87
.87
. 88
.88
.88
.88
.89
.90
.92 93
. silabs.com | Building a more connected world. Rev. 1.0 | 6 BGM13P Blue Gecko Bluetooth Module Data Sheet System Overview 3. System Overview 3.1 Introduction The BGM13P product family combines an energy-friendly MCU with a highly integrated radio transceiver and a high performance, ultra robust antenna. The devices are well suited for any battery operated application, as well as other system where ultra-small size, reliable high performance RF, low-power consumption and easy application development are key requirements. This section gives a short intro-
duction to the full radio and MCU system. A detailed block diagram of the BGM13P Bluetooth Smart module is shown in the figure below. Antenna Radio Transciever Chip Antenna or U.FL Connector Matching DEMOD N U L A B RF Frontend I LNA PGA IFADC PA Q Frequency Synthesizer AGC MOD C R F C F U B C R C C A R RESETn Debug Signals
(shared w/GPIO) Serial Wire and ETM Debug /
Programming Reset Management Unit Brown Out /
Power-On Reset IOVDD 1V8 VBAT Energy Management PAVDD / RFVDD / DVDD bypass DC-DC Converter VREGVDD / AVDD Voltage Monitor Voltage Regulator Internal Crystals 32.768 kHz Crystal 38.4 MHz Crystal ARM Cortex-M4 Core 512 KB ISP Flash Program Memory 64 KB RAM Memory Protection Unit Floating Point Unit DMA Controller Watchdog Timer Clock Management ULFRCO AUXHFRCO LFRCO LFXO HFRCO HFXO Port I/O Configuration IOVDD Digital Peripherals LETIMER TIMER CRYOTIMER PCNT RTC / RTCC USART LEUART I2C CRYPTO CRC LESENSE A H B A P B Port Mapper Analog Peripherals Port A Drivers Port B Drivers Port C Drivers Port D Drivers Port F Drivers PAn PBn PCn PDn PFn IDAC VDAC Internal Reference 12-bit ADC Capacitive Touch B F
&
x u M
-
+
Op-Amp T R O P A x u M t u p n I VDD Temp Sense
+
-
Analog Comparator Figure 3.1. BGM13P Block Diagram 3.2 Radio The BGM13P features a radio transceiver supporting Bluetooth low energy protocol. 3.2.1 Antenna Interface BGM13P module family includes options for either a high-performance, integrated chip antenna (BGM13PxxFxxxGA), or external an-
tenna via a U.FL connector (BGM13PxxFxxxGE). The table below includes performance specifications for the integrated chip antenna. silabs.com | Building a more connected world. Rev. 1.0 | 7 BGM13P Blue Gecko Bluetooth Module Data Sheet System Overview Table 3.1. Antenna Efficiency and Peak Gain With optimal layout Note
-2 to -4 dB 1 dBi Antenna efficiency, gain and radiation pattern are highly depend-
ent on the application PCB layout and mechanical design. Refer to 6. Layout Guidelines for PCB layout and antenna integration guidelines for optimal performance. Typical efficiency gain is ex-
pected to be from -3.5 to -5.5 dB. Parameter Efficiency Peak gain 3.2.2 RFSENSE The RFSENSE module generates a system wakeup interrupt upon detection of wideband RF energy at the antenna interface, providing true RF wakeup capabilities from low energy modes including EM2, EM3 and EM4. RFSENSE triggers on a relatively strong RF signal and is available in the lowest energy modes, allowing exceptionally low energy con-
sumption. RFSENSE does not demodulate or otherwise qualify the received signal, but software may respond to the wakeup event by enabling normal RF reception. Various strategies for optimizing power consumption and system response time in presence of false alarms may be employed using available timer peripherals. 3.2.3 Packet and State Trace The BGM13P Frame Controller has a packet and state trace unit that provides valuable information during the development phase. It features:
Non-intrusive trace of transmit data, receive data and state information Data observability on a single-pin UART data output, or on a two-pin SPI data output Configurable data output bitrate / baudrate Multiplexed transmitted data, received data and state / meta information in a single serial data stream 3.2.4 Random Number Generator The Frame Controller (FRC) implements a random number generator that uses entropy gathered from noise in the RF receive chain. The data is suitable for use in cryptographic applications. Output from the random number generator can be used either directly or as a seed or entropy source for software-based random num-
ber generator algorithms such as Fortuna. silabs.com | Building a more connected world. Rev. 1.0 | 8 3.3 Power The BGM13P has an Energy Management Unit (EMU) and efficient integrated regulators to generate internal supply voltages. Only a single external supply voltage is required, from which all internal voltages are created. An integrated DC-DC buck regulator is utilized to further reduce the current consumption. Figure 3.2 Power Supply Configuration for +8 dBm Devices on page 9 shows how the exter-
nal and internal supplies of the module are connected. BGM13P Blue Gecko Bluetooth Module Data Sheet System Overview DVDD PAVDD RFVDD Digital RF PA RF VDD VREGVDD AVDD IOVDD DC-DC Analog I/O Interfaces Figure 3.2. Power Supply Configuration for +8 dBm Devices 3.3.1 Energy Management Unit (EMU) The Energy Management Unit manages transitions of energy modes in the device. Each energy mode defines which peripherals and features are available and the amount of current the device consumes. The EMU can also be used to turn off the power to unused RAM blocks, and it contains control registers for the dc-dc regulator and the Voltage Monitor (VMON). The VMON is used to monitor multiple supply voltages. It has multiple channels which can be programmed individually by the user to determine if a sensed supply has fallen below a chosen threshold. 3.3.2 DC-DC Converter The DC-DC buck converter covers a wide range of load currents and provides up to 90% efficiency in energy modes EM0, EM1, EM2 and EM3. Patented RF noise mitigation allows operation of the DC-DC converter without degrading sensitivity of radio components. Protection features include programmable current limiting, short-circuit protection, and dead-time protection. The DC-DC converter may also enter bypass mode when the input voltage is too low for efficient operation. In bypass mode, the DC-DC input supply is internally connected directly to its output through a low resistance switch. Bypass mode also supports in-rush current limiting to prevent input supply voltage droops due to excessive output current transients. silabs.com | Building a more connected world. Rev. 1.0 | 9 3.3.3 Power Domains The BGM13P has two peripheral power domains for operation in EM2 and lower. If all of the peripherals in a peripheral power domain are configured as unused, the power domain for that group will be powered off in the low-power mode, reducing the overall current consumption of the device. BGM13P Blue Gecko Bluetooth Module Data Sheet System Overview Table 3.2. Peripheral Power Subdomains Peripheral Power Domain 1 Peripheral Power Domain 2 ACMP0 PCNT0 ADC0 LETIMER0 LESENSE APORT
-
ACMP1 CSEN VDAC0 LEUART0 I2C0 I2C1 IDAC 3.4 General Purpose Input/Output (GPIO) BGM13P has up to 25 General Purpose Input/Output pins. Each GPIO pin can be individually configured as either an output or input. More advanced configurations including open-drain, open-source, and glitch-filtering can be configured for each individual GPIO pin. The GPIO pins can be overridden by peripheral connections, like SPI communication. Each peripheral connection can be routed to sev-
eral GPIO pins on the device. The input value of a GPIO pin can be routed through the Peripheral Reflex System to other peripherals. The GPIO subsystem supports asynchronous external pin interrupts. 3.5 Clocking 3.5.1 Clock Management Unit (CMU) The Clock Management Unit controls oscillators and clocks in the BGM13P. Individual enabling and disabling of clocks to all peripheral modules is performed by the CMU. The CMU also controls enabling and configuration of the oscillators. A high degree of flexibility al-
lows software to optimize energy consumption in any specific application by minimizing power dissipation in unused peripherals and oscillators. 3.5.2 Internal Oscillators and Crystals The BGM13P fully integrates several oscillator sources and two crystals. The high-frequency crystal oscillator (HFXO) and integrated 38.4 MHz crystal provide a precise timing reference for the MCU and radio. The low-frequency crystal oscillator (LFXO) and integrated 32.768 kHz crystal provide an accurate timing reference for low energy modes and the real-time-clock circuits. An integrated high frequency RC oscillator (HFRCO) is available for the MCU system, when crystal accuracy is not required. The HFRCO employs fast startup at minimal energy consumption combined with a wide frequency range. An integrated auxilliary high frequency RC oscillator (AUXHFRCO) is available for timing the general-purpose ADC and the Serial Wire Viewer port with a wide frequency range. An integrated low frequency 32.768 kHz RC oscillator (LFRCO) for low power operation where high accuracy is not required. An integrated ultra-low frequency 1 kHz RC oscillator (ULFRCO) is available to provide a timing reference at the lowest energy con-
sumption in low energy modes. silabs.com | Building a more connected world. Rev. 1.0 | 10 BGM13P Blue Gecko Bluetooth Module Data Sheet System Overview 3.6 Counters/Timers and PWM 3.6.1 Timer/Counter (TIMER) TIMER peripherals keep track of timing, count events, generate PWM outputs and trigger timed actions in other peripherals through the PRS system. The core of each TIMER is a 16-bit counter with up to 4 compare/capture channels. Each channel is configurable in one of three modes. In capture mode, the counter state is stored in a buffer at a selected input event. In compare mode, the channel output reflects the comparison of the counter to a programmed threshold value. In PWM mode, the TIMER supports generation of pulse-width modulation (PWM) outputs of arbitrary waveforms defined by the sequence of values written to the compare registers, with optional dead-time insertion available in timer unit TIMER_0 only. 3.6.2 Wide Timer/Counter (WTIMER) WTIMER peripherals function just as TIMER peripherals, but are 32 bits wide. They keep track of timing, count events, generate PWM outputs and trigger timed actions in other peripherals through the PRS system. The core of each WTIMER is a 32-bit counter with up to 4 compare/capture channels. Each channel is configurable in one of three modes. In capture mode, the counter state is stored in a buffer at a selected input event. In compare mode, the channel output reflects the comparison of the counter to a programmed thresh-
old value. In PWM mode, the WTIMER supports generation of pulse-width modulation (PWM) outputs of arbitrary waveforms defined by the sequence of values written to the compare registers, with optional dead-time insertion available in timer unit WTIMER_0 only. 3.6.3 Real Time Counter and Calendar (RTCC) The Real Time Counter and Calendar (RTCC) is a 32-bit counter providing timekeeping in all energy modes. The RTCC includes a Binary Coded Decimal (BCD) calendar mode for easy time and date keeping. The RTCC can be clocked by any of the on-board oscilla-
tors with the exception of the AUXHFRCO, and it is capable of providing system wake-up at user defined instances. When receiving frames, the RTCC value can be used for timestamping. The RTCC includes 128 bytes of general purpose data retention, allowing easy and convenient data storage in all energy modes down to EM4H. A secondary RTC is used by the RF protocol stack for event scheduling, leaving the primary RTCC block available exclusively for appli-
cation software. 3.6.4 Low Energy Timer (LETIMER) The unique LETIMER is a 16-bit timer that is available in energy mode EM2 Deep Sleep in addition to EM1 Sleep and EM0 Active. This allows it to be used for timing and output generation when most of the device is powered down, allowing simple tasks to be performed while the power consumption of the system is kept at an absolute minimum. The LETIMER can be used to output a variety of wave-
forms with minimal software intervention. The LETIMER is connected to the Real Time Counter and Calendar (RTCC), and can be con-
figured to start counting on compare matches from the RTCC. 3.6.5 Ultra Low Power Wake-up Timer (CRYOTIMER) The CRYOTIMER is a 32-bit counter that is capable of running in all energy modes. It can be clocked by either the 32.768 kHz crystal oscillator (LFXO), the 32.768 kHz RC oscillator (LFRCO), or the 1 kHz RC oscillator (ULFRCO). It can provide periodic Wakeup events and PRS signals which can be used to wake up peripherals from any energy mode. The CRYOTIMER provides a wide range of inter-
rupt periods, facilitating flexible ultra-low energy operation. 3.6.6 Pulse Counter (PCNT) The Pulse Counter (PCNT) peripheral can be used for counting pulses on a single input or to decode quadrature encoded inputs. The clock for PCNT is selectable from either an external source on pin PCTNn_S0IN or from an internal timing reference, selectable from among any of the internal oscillators, except the AUXHFRCO. The module may operate in energy mode EM0 Active, EM1 Sleep, EM2 Deep Sleep, and EM3 Stop. 3.6.7 Watchdog Timer (WDOG) The watchdog timer can act both as an independent watchdog or as a watchdog synchronous with the CPU clock. It has windowed monitoring capabilities, and can generate a reset or different interrupts depending on the failure mode of the system. The watchdog can also monitor autonomous systems driven by PRS. silabs.com | Building a more connected world. Rev. 1.0 | 11 BGM13P Blue Gecko Bluetooth Module Data Sheet System Overview 3.7 Communications and Other Digital Peripherals 3.7.1 Universal Synchronous/Asynchronous Receiver/Transmitter (USART) The Universal Synchronous/Asynchronous Receiver/Transmitter is a flexible serial I/O module. It supports full duplex asynchronous UART communication with hardware flow control as well as RS-485, SPI, MicroWire and 3-wire. It can also interface with devices sup-
porting:
ISO7816 SmartCards IrDA I2S 3.7.2 Low Energy Universal Asynchronous Receiver/Transmitter (LEUART) The unique LEUARTTM provides two-way UART communication on a strict power budget. Only a 32.768 kHz clock is needed to allow UART communication up to 9600 baud. The LEUART includes all necessary hardware to make asynchronous serial communication possible with a minimum of software intervention and energy consumption. 3.7.3 Inter-Integrated Circuit Interface (I2C) The I2C module provides an interface between the MCU and a serial I2C bus. It is capable of acting as both a master and a slave and supports multi-master buses. Standard-mode, fast-mode and fast-mode plus speeds are supported, allowing transmission rates from 10 kbit/s up to 1 Mbit/s. Slave arbitration and timeouts are also available, allowing implementation of an SMBus-compliant system. The interface provided to software by the I2C module allows precise timing control of the transmission process and highly automated trans-
fers. Automatic recognition of slave addresses is provided in active and low energy modes. 3.7.4 Peripheral Reflex System (PRS) The Peripheral Reflex System provides a communication network between different peripheral modules without software involvement. Peripheral modules producing Reflex signals are called producers. The PRS routes Reflex signals from producers to consumer periph-
erals which in turn perform actions in response. Edge triggers and other functionality such as simple logic operations (AND, OR, NOT) can be applied by the PRS to the signals. The PRS allows peripheral to act autonomously without waking the MCU core, saving power. 3.7.5 Low Energy Sensor Interface (LESENSE) The Low Energy Sensor Interface LESENSETM is a highly configurable sensor interface with support for up to 16 individually configura-
ble sensors. By controlling the analog comparators, ADC, and DAC, LESENSE is capable of supporting a wide range of sensors and measurement schemes, and can for instance measure LC sensors, resistive sensors and capacitive sensors. LESENSE also includes a programmable finite state machine which enables simple processing of measurement results without CPU intervention. LESENSE is available in energy mode EM2, in addition to EM0 and EM1, making it ideal for sensor monitoring in applications with a strict energy budget. 3.8 Security Features 3.8.1 GPCRC (General Purpose Cyclic Redundancy Check) The GPCRC module implements a Cyclic Redundancy Check (CRC) function. It supports both 32-bit and 16-bit polynomials. The sup-
ported 32-bit polynomial is 0x04C11DB7 (IEEE 802.3), while the 16-bit polynomial can be programmed to any value, depending on the needs of the application. silabs.com | Building a more connected world. Rev. 1.0 | 12 BGM13P Blue Gecko Bluetooth Module Data Sheet System Overview 3.8.2 Crypto Accelerator (CRYPTO) The Crypto Accelerator is a fast and energy-efficient autonomous hardware encryption and decryption accelerator. EFR32 devices sup-
port AES encryption and decryption with 128- or 256-bit keys, ECC over both GF(P) and GF(2m), SHA-1 and SHA-2 (SHA-224 and SHA-256). Supported block cipher modes of operation for AES include: ECB, CTR, CBC, PCBC, CFB, OFB, GCM, CBC-MAC, GMAC and CCM. Supported ECC NIST recommended curves include P-192, P-224, P-256, K-163, K-233, B-163 and B-233. The CRYPTO1 block is tightly linked to the Radio Buffer Controller (BUFC) enabling fast and efficient autonomous cipher operations on data buffer content. It allows fast processing of GCM (AES), ECC and SHA with little CPU intervention. CRYPTO also provides trigger signals for DMA read and write operations. 3.8.3 True Random Number Generator (TRNG) The TRNG module is a non-deterministic random number generator based on a full hardware solution. The TRNG is validated with NIST800-22 and AIS-31 test suites as well as being suitable for FIPS 140-2 certification (for the purposes of cryptographic key genera-
tion). 3.8.4 Security Management Unit (SMU) The Security Management Unit (SMU) allows software to set up fine-grained security for peripheral access, which is not possible in the Memory Protection Unit (MPU). Peripherals may be secured by hardware on an individual basis, such that only priveleged accesses to the peripheral's register interface will be allowed. When an access fault occurs, the SMU reports the specific peripheral involved and can optionally generate an interrupt. 3.9 Analog 3.9.1 Analog Port (APORT) The Analog Port (APORT) is an analog interconnect matrix allowing access to many analog modules on a flexible selection of pins. Each APORT bus consists of analog switches connected to a common wire. Since many clients can operate differentially, buses are grouped by X/Y pairs. 3.9.2 Analog Comparator (ACMP) The Analog Comparator is used to compare the voltage of two analog inputs, with a digital output indicating which input voltage is high-
er. Inputs are selected from among internal references and external pins. The tradeoff between response time and current consumption is configurable by software. Two 6-bit reference dividers allow for a wide range of internally-programmable reference sources. The ACMP can also be used to monitor the supply voltage. An interrupt can be generated when the supply falls below or rises above the programmable threshold. 3.9.3 Analog to Digital Converter (ADC) The ADC is a Successive Approximation Register (SAR) architecture, with a resolution of up to 12 bits at up to 1 Msps. The output sample resolution is configurable and additional resolution is possible using integrated hardware for averaging over multiple samples. The ADC includes integrated voltage references and an integrated temperature sensor. Inputs are selectable from a wide range of sources, including pins configurable as either single-ended or differential. 3.9.4 Capacitive Sense (CSEN) The CSEN module is a dedicated Capacitive Sensing block for implementing touch-sensitive user interface elements such a switches and sliders. The CSEN module uses a charge ramping measurement technique, which provides robust sensing even in adverse condi-
tions including radiated noise and moisture. The module can be configured to take measurements on a single port pin or scan through multiple pins and store results to memory through DMA. Several channels can also be shorted together to measure the combined ca-
pacitance or implement wake-on-touch from very low energy modes. Hardware includes a digital accumulator and an averaging filter, as well as digital threshold comparators to reduce software overhead. silabs.com | Building a more connected world. Rev. 1.0 | 13 BGM13P Blue Gecko Bluetooth Module Data Sheet System Overview 3.9.5 Digital to Analog Current Converter (IDAC) The Digital to Analog Current Converter can source or sink a configurable constant current. This current can be driven on an output pin or routed to the selected ADC input pin for capacitive sensing. The full-scale current is programmable between 0.05 A and 64 A with several ranges consisting of various step sizes. 3.9.6 Digital to Analog Converter (VDAC) The Digital to Analog Converter (VDAC) can convert a digital value to an analog output voltage. The VDAC is a fully differential, 500 ksps, 12-bit converter. The opamps are used in conjunction with the VDAC, to provide output buffering. One opamp is used per single-
ended channel, or two opamps are used to provide differential outputs. The VDAC may be used for a number of different applications such as sensor interfaces or sound output. The VDAC can generate high-resolution analog signals while the MCU is operating at low frequencies and with low total power consumption. Using DMA and a timer, the VDAC can be used to generate waveforms without any CPU intervention. The VDAC is available in all energy modes down to and including EM3. 3.9.7 Operational Amplifiers The opamps are low power amplifiers with a high degree of flexibility targeting a wide variety of standard opamp application areas, and are available down to EM3. With flexible built-in programming for gain and interconnection they can be configured to support multiple common opamp functions. All pins are also available externally for filter configurations. Each opamp has a rail to rail input and a rail to rail output. They can be used in conjunction with the VDAC module or in stand-alone configurations. The opamps save energy, PCB space, and cost as compared with standalone opamps because they are integrated on-chip. 3.10 Reset Management Unit (RMU) The RMU is responsible for handling reset of the BGM13P. A wide range of reset sources are available, including several power supply monitors, pin reset, software controlled reset, core lockup reset, and watchdog reset. 3.11 Core and Memory 3.11.1 Processor Core The ARM Cortex-M processor includes a 32-bit RISC processor integrating the following features and tasks in the system:
ARM Cortex-M4 RISC processor achieving 1.25 Dhrystone MIPS/MHz Memory Protection Unit (MPU) supporting up to 8 memory segments Up to 512 kB flash program memory Up to 64 kB RAM data memory Configuration and event handling of all modules 2-pin Serial-Wire debug interface 3.11.2 Memory System Controller (MSC) The Memory System Controller (MSC) is the program memory unit of the microcontroller. The flash memory is readable and writable from both the Cortex-M and DMA. The flash memory is divided into two blocks; the main block and the information block. Program code is normally written to the main block, whereas the information block is available for special user data and flash lock bits. There is also a read-only page in the information block containing system and device calibration data. Read and write operations are supported in en-
ergy modes EM0 Active and EM1 Sleep. 3.11.3 Linked Direct Memory Access Controller (LDMA) The Linked Direct Memory Access (LDMA) controller allows the system to perform memory operations independently of software. This reduces both energy consumption and software workload. The LDMA allows operations to be linked together and staged, enabling so-
phisticated operations to be implemented. silabs.com | Building a more connected world. Rev. 1.0 | 14 3.12 Memory Map The BGM13P memory map is shown in the figures below. RAM and flash sizes are for the largest memory configuration. BGM13P Blue Gecko Bluetooth Module Data Sheet System Overview Figure 3.3. BGM13P Memory Map Core Peripherals and Code Space silabs.com | Building a more connected world. Rev. 1.0 | 15 BGM13P Blue Gecko Bluetooth Module Data Sheet System Overview Figure 3.4. BGM13P Memory Map Peripherals 3.13 Configuration Summary The features of the BGM13P are a subset of the feature set described in the device reference manual. The table below describes de-
vice specific implementation of the features. Remaining modules support full configuration. Table 3.3. Configuration Summary Module USART0 USART1 USART2 TIMER0 TIMER1 WTIMER0 Configuration IrDA SmartCard IrDA I2S SmartCard IrDA SmartCard with DTI
-
with DTI Pin Connections US0_TX, US0_RX, US0_CLK, US0_CS US1_TX, US1_RX, US1_CLK, US1_CS US2_TX, US2_RX, US2_CLK, US2_CS TIM0_CC[2:0], TIM0_CDTI[2:0]
TIM1_CC[3:0]
WTIM0_CC[2:0], WTIM0_CDTI[2:0]
silabs.com | Building a more connected world. Rev. 1.0 | 16 BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications 4. Electrical Specifications 4.1 Electrical Characteristics All electrical parameters in all tables are specified under the following conditions, unless stated otherwise:
Typical values are based on TAMB=25 C and VDD= 3.3 V, by production test and/or technology characterization. Radio performance numbers are measured in conducted mode, based on Silicon Laboratories reference designs using output pow-
er-specific external RF impedance-matching networks for interfacing to a 50 antenna. Minimum and maximum values represent the worst conditions across supply voltage, process variation, and operating temperature, unless stated otherwise. The BGM13P module has only one external supply pin (VDD). There are several internal supply rails mentioned in the electrical specifi-
cations, whose connections vary based on transmit power configuration. Refer to for the relationship between the module's external VDD pin and internal voltage supply rails. Refer to for more details about operational supply and temperature limits. silabs.com | Building a more connected world. Rev. 1.0 | 17 4.1.1 Absolute Maximum Ratings Stresses above those listed below may cause permanent damage to the device. This is a stress rating only and functional operation of the devices at those or any other conditions above those indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability. For more information on the available quality and relia-
bility data, see the Quality and Reliability Monitor Report at http://www.silabs.com/support/quality/pages/default.aspx. BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Parameter Storage temperature range Voltage on any supply pin Symbol TSTG VDDMAX VDDRAMPMAX Voltage ramp rate on any supply pin DC voltage on any GPIO pin VDIGPIN Table 4.1. Absolute Maximum Ratings Test Condition 5V tolerant GPIO pins1 2 3 Standard GPIO pins Maximum RF level at input PRFMAX2G4 Total current into supply pins IVDDMAX IVSSMAX Total current into VSS ground lines Current per I/O pin IIOMAX Current for all I/O pins IIOALLMAX Junction temperature TJ Note:
Source Sink Sink Source Sink Source Min
-40
-0.3
-0.3
-0.3
-40 Typ Max 85 3.8 1 Min of 5.25 and IOVDD
+2 IOVDD+0.3 10 200 200 50 50 200 200 105 Unit C V V / s V V dBm mA mA mA mA mA mA C 1. When a GPIO pin is routed to the analog module through the APORT, the maximum voltage = IOVDD. 2. Valid for IOVDD in valid operating range or when IOVDD is undriven (high-Z). If IOVDD is connected to a low-impedance source below the valid operating range (e.g. IOVDD shorted to VSS), the pin voltage maximum is IOVDD + 0.3 V, to avoid exceeding the maximum IO current specifications. 3. To operate above the IOVDD supply rail, over-voltage tolerance must be enabled according to the GPIO_Px_OVTDIS register. Pins with over-voltage tolerance disabled have the same limits as Standard GPIO. silabs.com | Building a more connected world. Rev. 1.0 | 18 4.1.2 Operating Conditions The following subsections define the operating conditions for the module. 4.1.2.1 General Operating Conditions BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Table 4.2. General Operating Conditions Parameter Operating ambient tempera-
ture range Symbol TA Test Condition
-G temperature grade VDD operating supply volt-
age VVDD HFCORECLK frequency fCORE HFCLK frequency fHFCLK DCDC in regulation DCDC in bypass, 50mA load VSCALE2, MODE = WS1 VSCALE0, MODE = WS0 VSCALE2 VSCALE0 Min
-40 2.4 1.8 Typ 25 3.3 3.3 Max 85 3.8 3.8 40 20 40 20 Unit C V V MHz MHz MHz MHz silabs.com | Building a more connected world. Rev. 1.0 | 19 4.1.3 DC-DC Converter Test conditions: V_DCDC_I=3.3 V, V_DCDC_O=1.8 V, I_DCDC_LOAD=50 mA, Heavy Drive configuration, F_DCDC_LN=7 MHz, un-
less otherwise indicated. BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Parameter Input voltage range Symbol VDCDC_I Output voltage programma-
ble range1 VDCDC_O Max load current ILOAD_MAX Table 4.3. DC-DC Converter Test Condition Bypass mode, IDCDC_LOAD = 50 mA Low noise (LN) mode, 1.8 V out-
put, IDCDC_LOAD = 100 mA, or Low power (LP) mode, 1.8 V out-
put, IDCDC_LOAD = 10 mA Low noise (LN) mode, Medium or Heavy Drive2 Low noise (LN) mode, Light Drive2 Low power (LP) mode, LPCMPBIASEMxx3 = 0 Low power (LP) mode, LPCMPBIASEMxx3 = 3 Min 1.8 2.4 1.8 Typ Max Unit VVREGVDD_ MAX VVREGVDD_ MAX VVREGVDD 70 50 75 10 V V V mA mA A mA Note:
1. Due to internal dropout, the DC-DC output will never be able to reach its input voltage, VVREGVDD. 2. Drive levels are defined by configuration of the PFETCNT and NFETCNT registers. Light Drive: PFETCNT=NFETCNT=3; Medi-
um Drive: PFETCNT=NFETCNT=7; Heavy Drive: PFETCNT=NFETCNT=15. 3. LPCMPBIASEMxx refers to either LPCMPBIASEM234H in the EMU_DCDCMISCCTRL register or LPCMPBIASEM01 in the EMU_DCDCLOEM01CFG register, depending on the energy mode. silabs.com | Building a more connected world. Rev. 1.0 | 20 BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications 4.1.4 Current Consumption 4.1.4.1 Current Consumption 3.3 V using DC-DC Converter Unless otherwise indicated, typical conditions are: VDD = 3.3 V. T = 25 C. Minimum and maximum values in this table represent the worst conditions across supply voltage and process variation at T = 25 C. Table 4.4. Current Consumption 3.3 V using DC-DC Converter Test Condition Min Parameter Current consumption in EM0 mode with all peripherals dis-
abled, DCDC in Low Noise DCM mode2 Symbol IACTIVE_DCM Current consumption in EM0 mode with all peripherals dis-
abled, DCDC in Low Noise CCM mode1 IACTIVE_CCM 38.4 MHz crystal, CPU running while loop from flash4 38 MHz HFRCO, CPU running Prime from flash 38 MHz HFRCO, CPU running while loop from flash 38 MHz HFRCO, CPU running CoreMark from flash 26 MHz HFRCO, CPU running while loop from flash 1 MHz HFRCO, CPU running while loop from flash 38.4 MHz crystal, CPU running while loop from flash4 38 MHz HFRCO, CPU running Prime from flash 38 MHz HFRCO, CPU running while loop from flash 38 MHz HFRCO, CPU running CoreMark from flash 26 MHz HFRCO, CPU running while loop from flash 1 MHz HFRCO, CPU running while loop from flash Current consumption in EM0 mode with all peripherals dis-
abled and voltage scaling enabled, DCDC in Low Noise CCM mode1 Current consumption in EM1 mode with all peripherals dis-
abled, DCDC in Low Noise DCM mode2 Current consumption in EM1 mode with all peripherals dis-
abled and voltage scaling enabled, DCDC in Low Noise DCM mode2 IACTIVE_CCM_VS 19 MHz HFRCO, CPU running while loop from flash 1 MHz HFRCO, CPU running while loop from flash IEM1_DCM 38.4 MHz crystal4 38 MHz HFRCO 26 MHz HFRCO 1 MHz HFRCO IEM1_DCM_VS 19 MHz HFRCO 1 MHz HFRCO Typ 87 69 70 82 76 615 97 80 81 92 94 1145 101 1124 56 39 46 588 50 572 Max Unit A/MHz A/MHz A/MHz A/MHz A/MHz A/MHz A/MHz A/MHz A/MHz A/MHz A/MHz A/MHz A/MHz A/MHz A/MHz A/MHz A/MHz A/MHz A/MHz A/MHz silabs.com | Building a more connected world. Rev. 1.0 | 21 Parameter Current consumption in EM2 mode, with voltage scaling enabled, DCDC in LP mode3 Symbol IEM2_VS Current consumption in EM3 mode, with voltage scaling enabled IEM3_VS Current consumption in EM4H mode, with voltage scaling enabled IEM4H_VS BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Test Condition Min Full 64 kB RAM retention and RTCC running from LFXO Full 64 kB RAM retention and RTCC running from LFRCO 1 bank RAM retention and RTCC running from LFRCO5 Full 64 kB RAM retention and CRYOTIMER running from ULFR-
CO 128 byte RAM retention, RTCC running from LFXO 128 byte RAM retention, CRYO-
TIMER running from ULFRCO 128 byte RAM retention, no RTCC Typ 1.4 1.5 1.3 1.14 0.75 0.44 0.42 0.07 Max Unit A A A A A A A A Current consumption in EM4S mode Note:
IEM4S No RAM retention, no RTCC 1. DCDC Low Noise CCM Mode = Light Drive (PFETCNT=NFETCNT=3), F=6.4 MHz (RCOBAND=4), ANASW=DVDD. 2. DCDC Low Noise DCM Mode = Light Drive (PFETCNT=NFETCNT=3), F=3.0 MHz (RCOBAND=0), ANASW=DVDD. 3. DCDC Low Power Mode = Medium Drive (PFETCNT=NFETCNT=7), LPOSCDIV=1, LPCMPBIASEM234H=0, LPCLIMILIM-
SEL=1, ANASW=DVDD. 4. CMU_HFXOCTRL_LOWPOWER=0. 5. CMU_LFRCOCTRL_ENVREF = 1, CMU_LFRCOCTRL_VREFUPDATE = 1 silabs.com | Building a more connected world. Rev. 1.0 | 22 4.1.4.2 Current Consumption Using Radio Unless otherwise indicated, typical conditions are: VBATT = 3.3 V. T = 25 C. DC-DC on. Minimum and maximum values in this table represent the worst conditions across supply voltage and process variation at T = 25 C. BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Symbol IRX_ACTIVE Parameter Current consumption in re-
ceive mode, active packet reception (MCU in EM1 @
38.4 MHz, peripheral clocks disabled), T 85 C IRX_LISTEN Current consumption in re-
ceive mode, listening for packet (MCU in EM1 @ 38.4 MHz, peripheral clocks disa-
bled), T 85 C Current consumption in transmit mode (MCU in EM1
@ 38.4 MHz, peripheral clocks disabled), T 85 C ITX Table 4.5. Current Consumption Using Radio Test Condition Min 125 kbit/s, 2GFSK, F = 2.4 GHz, Radio clock prescaled by 4 500 kbit/s, 2GFSK, F = 2.4 GHz, Radio clock prescaled by 4 1 Mbit/s, 2GFSK, F = 2.4 GHz, Radio clock prescaled by 4 2 Mbit/s, 2GFSK, F = 2.4 GHz, Radio clock prescaled by 4 125 kbit/s, 2GFSK, F = 2.4 GHz, No radio clock prescaling 500 kbit/s, 2GFSK, F = 2.4 GHz, No radio clock prescaling 1 Mbit/s, 2GFSK, F = 2.4 GHz, No radio clock prescaling 2 Mbit/s, 2GFSK, F = 2.4 GHz, No radio clock prescaling F = 2.4 GHz, CW, 0 dBm output power, Radio clock prescaled by 3 F = 2.4 GHz, CW, 0 dBm output power, Radio clock prescaled by 1 F = 2.4 GHz, CW, 3.5 dBm output power F = 2.4 GHz, CW, 8 dBm output power Typ 10.5 10.4 9.9 10.6 10.5 10.5 10.9 11.6 8.5 9.6 20.2 27.1 Max Unit mA mA mA mA mA mA mA mA mA mA mA silabs.com | Building a more connected world. Rev. 1.0 | 23 BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications 4.1.5 Wake Up Times Parameter Wakeup time from EM1 Wake up from EM2 Symbol tEM1_WU tEM2_WU Table 4.6. Wake Up Times Test Condition Min Code execution from flash Code execution from RAM Wake up from EM3 tEM3_WU Code execution from flash Wake up from EM4H1 Wake up from EM4S1 Time from release of reset source to first instruction ex-
ecution tEM4H_WU tEM4S_WU tRESET Power mode scaling time tSCALE Code execution from RAM Executing from flash Executing from flash Soft Pin Reset released Any other reset released VSCALE0 to VSCALE2, HFCLK =
19 MHz4 2 VSCALE2 to VSCALE0, HFCLK =
19 MHz3 Typ 3 10.9 3.8 10.9 3.8 90 300 51 358 31.8 4.3 Max Unit AHB Clocks s s s s s s s s s s Note:
1. Time from wakeup request until first instruction is executed. Wakeup results in device reset. 2. VSCALE0 to VSCALE2 voltage change transitions occur at a rate of 10 mV/s for approximately 20 s. During this transition, peak currents will be dependent on the value of the DECOUPLE output capacitor, from 35 mA (with a 1 F capacitor) to 70 mA
(with a 2.7 F capacitor). 3. Scaling down from VSCALE2 to VSCALE0 requires approximately 2.8 s + 29 HFCLKs. 4. Scaling up from VSCALE0 to VSCALE2 requires approximately 30.3 s + 28 HFCLKs. 4.1.6 Brown Out Detector (BOD) Table 4.7. Brown Out Detector (BOD) Parameter AVDD BOD threshold Symbol VAVDDBOD Test Condition AVDD rising AVDD falling (EM0/EM1) AVDD falling (EM2/EM3) AVDD BOD hysteresis AVDD BOD response time EM4 BOD threshold VAVDDBOD_HYST tAVDDBOD_DELAY Supply drops at 0.1V/s rate VEM4DBOD AVDD rising AVDD falling EM4 BOD hysteresis EM4 BOD response time VEM4BOD_HYST tEM4BOD_DELAY Supply drops at 0.1V/s rate Min 1.62 1.53 1.45 Typ 20 2.4 25 300 Max 1.8 1.7 Unit V V V mV s V V mV s silabs.com | Building a more connected world. Rev. 1.0 | 24 4.1.7 Frequency Synthesizer BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Table 4.8. Frequency Synthesizer Parameter RF synthesizer frequency range Symbol fRANGE LO tuning frequency resolu-
tion with 38.4 MHz crystal fRES Frequency deviation resolu-
tion with 38.4 MHz crystal Maximum frequency devia-
tion with 38.4 MHz crystal dfRES dfMAX Test Condition 2400 - 2483.5 MHz 2400 - 2483.5 MHz 2400 - 2483.5 MHz 2400 - 2483.5 MHz Min 2400 Typ Max 2483.5 73 73 Unit MHz Hz Hz 1677 kHz silabs.com | Building a more connected world. Rev. 1.0 | 25 BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications 4.1.8 2.4 GHz RF Transceiver Characteristics 4.1.8.1 RF Transmitter General Characteristics for 2.4 GHz Band Unless otherwise indicated, typical conditions are: T = 25 C, VDD = 3.3 V. DC-DC on. Crystal frequency=38.4 MHz. RF center fre-
quency 2.45 GHz. Conducted measurement from the antenna feedpoint. Table 4.9. RF Transmitter General Characteristics for 2.4 GHz Band Parameter Maximum TX power1 Minimum active TX Power Output power step size Symbol POUTMAX POUTMIN POUTSTEP Test Condition 8 dBm-rated part numbers CW
-5 dBm< Output power < 0 dBm 0 dBm < output power <
POUTMAX 2.4 V < VVDD < 3.3 V, BGM13P22 Output power variation vs supply at POUTMAX Output power variation vs temperature at POUTMAX Output power variation vs RF frequency at POUTMAX RF tuning frequency range Note:
POUTVAR_V POUTVAR_T From -40 to +85 C, BGM13P22 POUTVAR_F Over RF tuning frequency range FRANGE Min 2400 Typ 8
-27 0.8 0.5 0.05 1.7 0.3 Max Unit dBm dBm dB dB dB dB dB 2483.5 MHz 1. Supported transmit power levels are determined by the ordering part number (OPN). Transmit power ratings for all devices cov-
ered in this datasheet can be found in the Max TX Power column of the Ordering Information Table. 4.1.8.2 RF Receiver General Characteristics for 2.4 GHz Band Unless otherwise indicated, typical conditions are: T = 25 C, VDD = 3.3 V. DC-DC on. Crystal frequency=38.4 MHz. RF center fre-
quency 2.45 GHz. Conducted measurement from the antenna feedpoint. Table 4.10. RF Receiver General Characteristics for 2.4 GHz Band Parameter RF tuning frequency range Receive mode maximum spurious emission Symbol FRANGE SPURRX Test Condition 30 MHz to 1 GHz 1 GHz to 12 GHz Max spurious emissions dur-
ing active receive mode, per FCC Part 15.109(a) SPURRX_FCC 216 MHz to 960 MHz, Conducted Measurement Above 960 MHz, Conducted Measurement Min 2400 Typ
-87.3
-81.0
-84.2
-73.1 Max 2483.5 Unit MHz dBm dBm dBm dBm silabs.com | Building a more connected world. Rev. 1.0 | 26 BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications 4.1.8.3 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4GHz Band, 125 kbps Data Rate Unless otherwise indicated, typical conditions are: T = 25 C, VDD = 3.3 V. DC-DC on. Crystal frequency=38.4 MHz. RF center fre-
quency 2.45 GHz. Conducted measurement from the antenna feedpoint. Table 4.11. RF Receiver Characteristics for Bluetooth Low Energy in the 2.4GHz Band, 125 kbps Data Rate Parameter Sensitivity, 0.1% BER Symbol SENS Test Condition Signal is reference signal1. Using DC-DC converter. With non-ideal signals as speci-
fied in RF-PHY.TS.4.2.2, section 4.6.1. Min Typ
-103.2
-102.8 Max Unit dBm dBm Note:
1. Reference signal is defined 2GFSK at -67 dBm, Modulation index = 0.5, BT = 0.5, Bit rate = 125 kbps, desired data = PRBS9;
interferer data = PRBS15; frequency accuracy better than 1 ppm. 4.1.8.4 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4GHz Band, 500 kbps Data Rate Unless otherwise indicated, typical conditions are: T = 25 C, VDD = 3.3 V. DC-DC on. Crystal frequency=38.4 MHz. RF center fre-
quency 2.45 GHz. Conducted measurement from the antenna feedpoint. Table 4.12. RF Receiver Characteristics for Bluetooth Low Energy in the 2.4GHz Band, 500 kbps Data Rate Parameter Sensitivity, 0.1% BER Symbol SENS Test Condition Signal is reference signal1. Using DC-DC converter. With non-ideal signals as speci-
fied in RF-PHY.TS.4.2.2, section 4.6.1. Min Typ
-98.8
-97.6 Max Unit dBm dBm Note:
1. Reference signal is defined 2GFSK at -67 dBm, Modulation index = 0.5, BT = 0.5, Bit rate = 500 kbps, desired data = PRBS9;
interferer data = PRBS15; frequency accuracy better than 1 ppm. 4.1.8.5 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4GHz Band, 1 Mbps Data Rate Unless otherwise indicated, typical conditions are: T = 25 C, VDD = 3.3 V. DC-DC on. Crystal frequency=38.4 MHz. RF center fre-
quency 2.45 GHz. Conducted measurement from the antenna feedpoint. Table 4.13. RF Receiver Characteristics for Bluetooth Low Energy in the 2.4GHz Band, 1 Mbps Data Rate Parameter Sensitivity, 0.1% BER Symbol SENS Test Condition Signal is reference signal1. Using DC-DC converter. With non-ideal signals as speci-
fied in RF-PHY.TS.4.2.2, section 4.6.1. Min Typ
-95
-94.8 Max Unit dBm dBm Note:
1. Reference signal is defined 2GFSK at -67 dBm, Modulation index = 0.5, BT = 0.5, Bit rate = 1 Mbps, desired data = PRBS9;
interferer data = PRBS15; frequency accuracy better than 1 ppm. silabs.com | Building a more connected world. Rev. 1.0 | 27 BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications 4.1.8.6 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4GHz Band, 2 Mbps Data Rate Unless otherwise indicated, typical conditions are: T = 25 C, VDD = 3.3 V. DC-DC on. Crystal frequency=38.4 MHz. RF center fre-
quency 2.45 GHz. Conducted measurement from the antenna feedpoint. Table 4.14. RF Receiver Characteristics for Bluetooth Low Energy in the 2.4GHz Band, 2 Mbps Data Rate Parameter Sensitivity, 0.1% BER Symbol SENS Test Condition Signal is reference signal1. Using DC-DC converter. With non-ideal signals as speci-
fied in RF-PHY.TS.4.2.2, section 4.6.1. Min Typ
-91.2
-91.2 Max Unit dBm dBm Note:
1. Reference signal is defined 2GFSK at -67 dBm, Modulation index = 0.5, BT = 0.5, Bit rate = 2 Mbps, desired data = PRBS9;
interferer data = PRBS15; frequency accuracy better than 1 ppm. silabs.com | Building a more connected world. Rev. 1.0 | 28 4.1.9 Oscillators 4.1.9.1 Low-Frequency Crystal Oscillator (LFXO) BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Table 4.15. Low-Frequency Crystal Oscillator (LFXO) Parameter Crystal frequency Overall frequency tolerance in all conditions1 Note:
Symbol fLFXO FTLFXO Test Condition Min
-100 Typ 32.768 Max 100 Unit kHz ppm 1. Nominal crystal frequency tolerance of 20 ppm. 4.1.9.2 High-Frequency Crystal Oscillator (HFXO) Table 4.16. High-Frequency Crystal Oscillator (HFXO) Parameter Crystal frequency Frequency tolerance for the crystal Symbol fHFXO FTHFXO Test Condition 38.4 MHz required for radio trans-
ciever operation Min
-40 Typ 38.4 Max 40 Unit MHz ppm 4.1.9.3 Low-Frequency RC Oscillator (LFRCO) Table 4.17. Low-Frequency RC Oscillator (LFRCO) Parameter Oscillation frequency Startup time Current consumption 1 Symbol fLFRCO tLFRCO ILFRCO Test Condition ENVREF2 = 1 ENVREF2 = 0 ENVREF = 1 in CMU_LFRCOCTRL ENVREF = 0 in CMU_LFRCOCTRL Min 31.3 31.3 Typ 32.768 32.768 500 342 494 Max 33.6 33.4 Unit kHz kHz s nA nA Note:
1. Block is supplied by AVDD if ANASW = 0, or DVDD if ANASW=1 in EMU_PWRCTRL register. 2. In CMU_LFRCOCTRL register. silabs.com | Building a more connected world. Rev. 1.0 | 29 4.1.9.4 High-Frequency RC Oscillator (HFRCO) Table 4.18. High-Frequency RC Oscillator (HFRCO) BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Parameter Frequency accuracy Symbol fHFRCO_ACC Start-up time tHFRCO Current consumption on all supplies IHFRCO Coarse trim step size (% of period) Fine trim step size (% of pe-
riod) SSHFRCO_COARS E SSHFRCO_FINE Period jitter Frequency limits PJHFRCO fHFRCO_BAND Test Condition At production calibrated frequen-
cies, across supply voltage and temperature fHFRCO 19 MHz 4 < fHFRCO < 19 MHz fHFRCO 4 MHz fHFRCO = 38 MHz fHFRCO = 32 MHz fHFRCO = 26 MHz fHFRCO = 19 MHz fHFRCO = 16 MHz fHFRCO = 13 MHz fHFRCO = 7 MHz fHFRCO = 4 MHz fHFRCO = 2 MHz fHFRCO = 1 MHz FREQRANGE = 0, FINETUNIN-
GEN = 0 FREQRANGE = 3, FINETUNIN-
GEN = 0 FREQRANGE = 6, FINETUNIN-
GEN = 0 FREQRANGE = 7, FINETUNIN-
GEN = 0 FREQRANGE = 8, FINETUNIN-
GEN = 0 FREQRANGE = 10, FINETUNIN-
GEN = 0 FREQRANGE = 11, FINETUNIN-
GEN = 0 FREQRANGE = 12, FINETUNIN-
GEN = 0 Min
-2.5 3.47 6.24 11.3 13.45 16.5 23.11 27.27 33.33 Typ 300 1 2.5 267 224 189 154 133 118 89 34 29 26 0.8 0.1 0.2 Max 2.5 Unit
%
299 248 211 172 148 135 100 44 40 36 ns s s A A A A A A A A A A
%
%
% RMS 6.15 MHz 11.45 MHz 19.8 22.8 29.0 MHz MHz MHz 40.63 MHz 48 54 MHz MHz silabs.com | Building a more connected world. Rev. 1.0 | 30 4.1.9.5 Ultra-low Frequency RC Oscillator (ULFRCO) BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Table 4.19. Ultra-low Frequency RC Oscillator (ULFRCO) Parameter Oscillation frequency Symbol fULFRCO Test Condition Min 0.95 Typ 1 Max 1.07 Unit kHz 4.1.10 Flash Memory Characteristics5 Parameter Flash erase cycles before failure Flash data retention Word (32-bit) programming time Symbol ECFLASH RETFLASH tW_PROG Page erase time4 Mass erase time1 Device erase time2 3 Erase current6 Write current6 Supply voltage during flash erase and write Note:
tPERASE tMERASE tDERASE IERASE IWRITE VFLASH Table 4.20. Flash Memory Characteristics5 Test Condition Burst write, 128 words, average time per word Single word Page Erase Min 10000 10 20 62 20 20 1.62 Typ 26.3 68.9 29.5 30 56.2 Max 30 80 40 40 70 2.0 3.5 3.6 Unit cycles years s s ms ms ms mA mA V 1. Mass erase is issued by the CPU and erases all flash. 2. Device erase is issued over the AAP interface and erases all flash, SRAM, the Lock Bit (LB) page, and the User data page Lock Word (ULW). 3. From setting the DEVICEERASE bit in AAP_CMD to 1 until the ERASEBUSY bit in AAP_STATUS is cleared to 0. Internal setup and hold times for flash control signals are included. 4. From setting the ERASEPAGE bit in MSC_WRITECMD to 1 until the BUSY bit in MSC_STATUS is cleared to 0. Internal setup and hold times for flash control signals are included. 5. Flash data retention information is published in the Quarterly Quality and Reliability Report. 6. Measured at 25 C. silabs.com | Building a more connected world. Rev. 1.0 | 31 BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications 4.1.11 General-Purpose I/O (GPIO) Parameter Input low voltage Input high voltage Output high voltage relative to IOVDD Symbol VIL VIH VOH Table 4.21. General-Purpose I/O (GPIO) Test Condition GPIO pins GPIO pins Min IOVDD*0.7 Sourcing 3 mA, IOVDD 3 V, IOVDD*0.8 DRIVESTRENGTH1 = WEAK Sourcing 1.2 mA, IOVDD 1.62 V, IOVDD*0.6 DRIVESTRENGTH1 = WEAK Sourcing 20 mA, IOVDD 3 V, IOVDD*0.8 DRIVESTRENGTH1 = STRONG Sourcing 8 mA, IOVDD 1.62 V, IOVDD*0.6 Output low voltage relative to IOVDD VOL Input leakage current IIOLEAK DRIVESTRENGTH1 = STRONG Sinking 3 mA, IOVDD 3 V, DRIVESTRENGTH1 = WEAK Sinking 1.2 mA, IOVDD 1.62 V, DRIVESTRENGTH1 = WEAK Sinking 20 mA, IOVDD 3 V, DRIVESTRENGTH1 = STRONG Sinking 8 mA, IOVDD 1.62 V, DRIVESTRENGTH1 = STRONG All GPIO except LFXO pins, GPIO IOVDD LFXO Pins, GPIO IOVDD Input leakage current on 5VTOL pads above IOVDD I5VTOLLEAK IOVDD < GPIO IOVDD + 2 V I/O pin pull-up/pull-down re-
sistor RPUD Pulse width of pulses re-
moved by the glitch suppres-
sion filter tIOGLITCH 30 15 Typ Max Unit 0.1 0.1 3.3 40 25 IOVDD*0.3 IOVDD*0.2 IOVDD*0.4 IOVDD*0.2 IOVDD*0.4 30 50 15 65 45 V V V V V V V V V V nA nA A k ns silabs.com | Building a more connected world. Rev. 1.0 | 32 Symbol tIOOF Test Condition CL = 50 pF, BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Min Typ 1.8 Max Unit ns Parameter Output fall time, From 70%
to 30% of VIO DRIVESTRENGTH1 = STRONG, SLEWRATE1 = 0x6 CL = 50 pF, DRIVESTRENGTH1 = WEAK, SLEWRATE1 = 0x6 CL = 50 pF, DRIVESTRENGTH1 = STRONG, SLEWRATE = 0x61 CL = 50 pF, DRIVESTRENGTH1 = WEAK, SLEWRATE1 = 0x6 4.5 2.2 7.4 ns ns ns Output rise time, From 30%
to 70% of VIO tIOOR Note:
1. In GPIO_Pn_CTRL register. silabs.com | Building a more connected world. Rev. 1.0 | 33 4.1.12 Voltage Monitor (VMON) Parameter Supply current (including I_SENSE) Symbol IVMON Table 4.22. Voltage Monitor (VMON) Test Condition Min In EM0 or EM1, 1 supply moni-
tored In EM0 or EM1, 4 supplies moni-
tored In EM2, EM3 or EM4, 1 supply monitored and above threshold In EM2, EM3 or EM4, 1 supply monitored and below threshold In EM2, EM3 or EM4, 4 supplies monitored and all above threshold In EM2, EM3 or EM4, 4 supplies monitored and all below threshold BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Typ 6.3 12.5 62 62 99 99 2 2 200 20 460 26 Max 8 15 3.4 Unit A A nA nA nA nA A nA V mV mV ns mV 1.62 Loading of monitored supply ISENSE In EM0 or EM1 Threshold range Threshold step size Response time Hysteresis VVMON_RANGE NVMON_STESP tVMON_RES VVMON_HYST In EM2, EM3 or EM4 Coarse Fine Supply drops at 1V/s rate silabs.com | Building a more connected world. Rev. 1.0 | 34 4.1.13 Analog to Digital Converter (ADC) Specified at 1 Msps, ADCCLK = 16 MHz, BIASPROG = 0, GPBIASACC = 0, unless otherwise indicated. Table 4.23. Analog to Digital Converter (ADC) BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Parameter Resolution Input voltage range5 Input range of external refer-
ence voltage, single ended and differential Power supply rejection2 Analog input common mode rejection ratio Current from all supplies, us-
ing internal reference buffer. Continous operation. WAR-
MUPMODE4 = KEEPADC-
WARM Current from all supplies, us-
ing internal reference buffer. Duty-cycled operation. WAR-
MUPMODE4 = NORMAL Current from all supplies, us-
ing internal reference buffer. Duty-cycled operation. AWARMUPMODE4 = KEEP-
INSTANDBY or KEEPIN-
SLOWACC Current from all supplies, us-
ing internal reference buffer. Continous operation. WAR-
MUPMODE4 = KEEPADC-
WARM Current from all supplies, us-
ing internal reference buffer. Duty-cycled operation. WAR-
MUPMODE4 = NORMAL Current from all supplies, us-
ing internal reference buffer. Duty-cycled operation. AWARMUPMODE4 = KEEP-
INSTANDBY or KEEPIN-
SLOWACC Symbol VRESOLUTION VADCIN VADCREFIN_P Test Condition Single ended Differential PSRRADC CMRRADC At DC At DC IADC_CONTI-
NOUS_LP 1 Msps / 16 MHz ADCCLK, BIA-
SPROG = 0, GPBIASACC = 1 3 250 ksps / 4 MHz ADCCLK, BIA-
SPROG = 6, GPBIASACC = 1 3 62.5 ksps / 1 MHz ADCCLK, BIA-
SPROG = 15, GPBIASACC = 1 3 IADC_NORMAL_LP 35 ksps / 16 MHz ADCCLK, BIA-
SPROG = 0, GPBIASACC = 1 3 5 ksps / 16 MHz ADCCLK BIA-
SPROG = 0, GPBIASACC = 1 3 IADC_STAND-
BY_LP 125 ksps / 16 MHz ADCCLK, BIA-
SPROG = 0, GPBIASACC = 1 3 35 ksps / 16 MHz ADCCLK, BIA-
SPROG = 0, GPBIASACC = 1 3 IADC_CONTI-
NOUS_HP 1 Msps / 16 MHz ADCCLK, BIA-
SPROG = 0, GPBIASACC = 0 3 250 ksps / 4 MHz ADCCLK, BIA-
SPROG = 6, GPBIASACC = 0 3 62.5 ksps / 1 MHz ADCCLK, BIA-
SPROG = 15, GPBIASACC = 0 3 IADC_NORMAL_HP 35 ksps / 16 MHz ADCCLK, BIA-
SPROG = 0, GPBIASACC = 0 3 5 ksps / 16 MHz ADCCLK BIA-
SPROG = 0, GPBIASACC = 0 3 IADC_STAND-
BY_HP 125 ksps / 16 MHz ADCCLK, BIA-
SPROG = 0, GPBIASACC = 0 3 35 ksps / 16 MHz ADCCLK, BIA-
SPROG = 0, GPBIASACC = 0 3 Current from HFPERCLK IADC_CLK HFPERCLK = 16 MHz Min 6
-VFS/2 1 Typ 80 80 270 125 80 45 8 105 70 325 175 125 85 16 160 125 140 Max 12 VFS VFS/2 VAVDD 290 Unit Bits V V V dB dB A A A A A A A A A A A A A A A silabs.com | Building a more connected world. Rev. 1.0 | 35 BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Test Condition Min Typ Max Parameter ADC clock frequency Throughput rate Conversion time1 Symbol fADCCLK fADCRATE tADCCONV 6 bit 8 bit 12 bit Startup time of reference generator and ADC core tADCSTART WARMUPMODE4 = NORMAL WARMUPMODE4 = KEEPIN-
STANDBY WARMUPMODE4 = KEEPINSLO-
WACC SNDR at 1Msps and fIN =
10kHz SNDRADC Internal reference7, differential measurement External reference6, differential measurement Spurious-free dynamic range
(SFDR) SFDRADC 1 MSamples/s, 10 kHz full-scale sine wave Differential non-linearity
(DNL) Integral non-linearity (INL), End point method DNLADC INLADC Offset error Gain error in ADC VADCOFFSETERR VADCGAIN Temperature sensor slope VTS_SLOPE Note:
12 bit resolution, No missing co-
des 12 bit resolution Using internal reference Using external reference 58
-1
-6
-3 7 9 13 67 68 75 0
-0.2
-1
-1.84 16 1 5 2 1 2 6 3 3.5 Unit MHz Msps cycles cycles cycles s s s dB dB dB LSB LSB LSB
%
%
mV/C 1. Derived from ADCCLK. 2. PSRR is referenced to AVDD when ANASW=0 and to DVDD when ANASW=1 in EMU_PWRCTRL. 3. In ADCn_BIASPROG register. 4. In ADCn_CNTL register. 5. The absolute voltage allowed at any ADC input is dictated by the power rail supplied to on-chip circuitry, and may be lower than the effective full scale voltage. All ADC inputs are limited to the ADC supply (AVDD or DVDD depending on EMU_PWRCTRL_ANASW). Any ADC input routed through the APORT will further be limited by the IOVDD supply to the pin. 6. External reference is 1.25 V applied externally to ADCnEXTREFP, with the selection CONF in the SINGLECTRL_REF or SCANCTRL_REF register field and VREFP in the SINGLECTRLX_VREFSEL or SCANCTRLX_VREFSEL field. The differential input range with this configuration is 1.25 V. 7. Internal reference option used corresponds to selection 2V5 in the SINGLECTRL_REF or SCANCTRL_REF register field. The differential input range with this configuration is 1.25 V. Typical value is characterized using full-scale sine wave input. Minimum value is production-tested using sine wave input at 1.5 dB lower than full scale. silabs.com | Building a more connected world. Rev. 1.0 | 36 4.1.14 Current Digital to Analog Converter (IDAC) Table 4.24. Current Digital to Analog Converter (IDAC) BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Parameter Number of ranges Output current Symbol NIDAC_RANGES IIDAC_OUT Test Condition RANGSEL1 = RANGE0 RANGSEL1 = RANGE1 RANGSEL1 = RANGE2 RANGSEL1 = RANGE3 Linear steps within each range NIDAC_STEPS Step size SSIDAC RANGSEL1 = RANGE0 RANGSEL1 = RANGE1 RANGSEL1 = RANGE2 RANGSEL1 = RANGE3 Total accuracy, STEPSEL1 =
0x10 ACCIDAC EM0 or EM1, AVDD=3.3 V, T = 25 C EM0 or EM1, Across operating temperature range EM2 or EM3, Source mode, RANGSEL1 = RANGE0, AVDD=3.3 V, T = 25 C EM2 or EM3, Source mode, RANGSEL1 = RANGE1, AVDD=3.3 V, T = 25 C EM2 or EM3, Source mode, RANGSEL1 = RANGE2, AVDD=3.3 V, T = 25 C EM2 or EM3, Source mode, RANGSEL1 = RANGE3, AVDD=3.3 V, T = 25 C EM2 or EM3, Sink mode, RANG-
SEL1 = RANGE0, AVDD=3.3 V, T
= 25 C EM2 or EM3, Sink mode, RANG-
SEL1 = RANGE1, AVDD=3.3 V, T
= 25 C EM2 or EM3, Sink mode, RANG-
SEL1 = RANGE2, AVDD=3.3 V, T
= 25 C EM2 or EM3, Sink mode, RANG-
SEL1 = RANGE3, AVDD=3.3 V, T
= 25 C Output within 1% of steady state value Start up time tIDAC_SU Min 0.05 1.6 0.5 2
-3
-18 Typ Max 4 32 50 100 500 2
-2
-1.7
-0.8
-0.5
-0.7
-0.6
-0.5
-0.5 5 1.6 4.7 16 64 3 22 Unit ranges A A A A steps nA nA nA A
%
%
%
%
%
%
%
%
%
%
s silabs.com | Building a more connected world. Rev. 1.0 | 37 Parameter Settling time, (output settled within 1% of steady state val-
ue), Symbol tIDAC_SETTLE Test Condition Range setting is changed Step value is changed Current consumption2 IIDAC Output voltage compliance in source mode, source current change relative to current sourced at 0 V ICOMP_SRC Output voltage compliance in sink mode, sink current change relative to current sunk at IOVDD ICOMP_SINK EM0 or EM1 Source mode, ex-
cluding output current, Across op-
erating temperature range EM0 or EM1 Sink mode, exclud-
ing output current, Across operat-
ing temperature range EM2 or EM3 Source mode, ex-
cluding output current, T = 25 C EM2 or EM3 Sink mode, exclud-
ing output current, T = 25 C EM2 or EM3 Source mode, ex-
cluding output current, T 85 C EM2 or EM3 Sink mode, exclud-
ing output current, T 85 C 2-100 mv) 2-100 mV) RANGESEL1=0, output voltage =
min(VIOVDD, VAVDD RANGESEL1=1, output voltage =
min(VIOVDD, VAVDD RANGESEL1=2, output voltage =
min(VIOVDD, VAVDD RANGESEL1=3, output voltage =
min(VIOVDD, VAVDD RANGESEL1=0, output voltage =
100 mV 2-150 mV) 2-250 mV) RANGESEL1=1, output voltage =
100 mV RANGESEL1=2, output voltage =
150 mV RANGESEL1=3, output voltage =
250 mV BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Min Typ Max Unit 5 1 11 13 0.023 0.041 11 13 0.11 0.06 0.04 0.03 0.12 0.05 0.04 0.03 15 18 s s A A A A A A
%
%
%
%
%
%
%
%
Note:
1. In IDAC_CURPROG register. 2. The IDAC is supplied by either AVDD, DVDD, or IOVDD based on the setting of ANASW in the EMU_PWRCTRL register and PWRSEL in the IDAC_CTRL register. Setting PWRSEL to 1 selects IOVDD. With PWRSEL cleared to 0, ANASW selects be-
tween AVDD (0) and DVDD (1). silabs.com | Building a more connected world. Rev. 1.0 | 38 4.1.15 Analog Comparator (ACMP) Parameter Input voltage range Symbol VACMPIN Supply voltage VACMPVDD Active current not including voltage reference2 IACMP Current consumption of inter-
nal voltage reference2 IACMPREF BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Table 4.25. Analog Comparator (ACMP) Test Condition ACMPVDD =
ACMPn_CTRL_PWRSEL 1 BIASPROG4 0x10 or FULL-
BIAS4 = 0 0x10 < BIASPROG4 0x20 and FULLBIAS4 = 1 BIASPROG4 = 1, FULLBIAS4 = 0 BIASPROG4 = 0x10, FULLBIAS4
= 0 BIASPROG4 = 0x02, FULLBIAS4
= 1 BIASPROG4 = 0x20, FULLBIAS4
= 1 VLP selected as input using 2.5 V Reference / 4 (0.625 V) VLP selected as input using VDD VBDIV selected as input using 1.25 V reference / 1 VADIV selected as input using VDD/1 Min 1.8 2.1 Typ Max Unit 50 306 6.1 74 50 20 4.1 2.4 VACMPVDD VVREGVDD_ MAX VVREGVDD_ MAX 11 92 V V V nA nA A A nA nA A A silabs.com | Building a more connected world. Rev. 1.0 | 39 Parameter Hysteresis (VCM = 1.25 V, BIASPROG4 = 0x10, FULL-
BIAS4 = 1) Symbol VACMPHYST Test Condition HYSTSEL5 = HYST0 HYSTSEL5 = HYST1 HYSTSEL5 = HYST2 HYSTSEL5 = HYST3 HYSTSEL5 = HYST4 HYSTSEL5 = HYST5 HYSTSEL5 = HYST6 HYSTSEL5 = HYST7 HYSTSEL5 = HYST8 HYSTSEL5 = HYST9 HYSTSEL5 = HYST10 HYSTSEL5 = HYST11 HYSTSEL5 = HYST12 HYSTSEL5 = HYST13 HYSTSEL5 = HYST14 HYSTSEL5 = HYST15 Comparator delay3 tACMPDELAY BIASPROG4 = 1, FULLBIAS4 = 0 BIASPROG4 = 0x10, FULLBIAS4
= 0 BIASPROG4 = 0x02, FULLBIAS4
= 1 BIASPROG4 = 0x20, FULLBIAS4
= 1 BIASPROG4 =0x10, FULLBIAS4
= 1 Offset voltage VACMPOFFSET Reference voltage VACMPREF Internal 1.25 V reference Internal 2.5 V reference Capacitive sense internal re-
sistance RCSRES CSRESSEL6 = 0 CSRESSEL6 = 1 CSRESSEL6 = 2 CSRESSEL6 = 3 CSRESSEL6 = 4 CSRESSEL6 = 5 CSRESSEL6 = 6 CSRESSEL6 = 7 BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Min Typ Max Unit
-3 5 12 17 23 26 30 34
-3
-27
-50
-67
-86
-104
-130
-155
-35 1 1.98 0 18 33 46 57 68 79 90 0
-18
-33
-45
-57
-67
-78
-88 30 3.7 3 27 50 67 86 104 130 155 3
-5
-12
-17
-23
-26
-30
-34 95 10 360 1000 35 1.25 2.5 infinite 15 27 39 51 102 164 239 35 1.47 2.8 mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV mV s s ns ns mV V V k k k k k k k k silabs.com | Building a more connected world. Rev. 1.0 | 40 BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Parameter Note:
Symbol Test Condition Min Typ Max Unit 1. ACMPVDD is a supply chosen by the setting in ACMPn_CTRL_PWRSEL and may be IOVDD, AVDD or DVDD. 2. The total ACMP current is the sum of the contributions from the ACMP and its internal voltage reference. IACMPTOTAL = IACMP +
IACMPREF. 3. 100 mV differential drive. 4. In ACMPn_CTRL register. 5. In ACMPn_HYSTERESIS registers. 6. In ACMPn_INPUTSEL register. 4.1.16 I2C 4.1.16.1 I2C Standard-mode (Sm)1 Parameter SCL clock frequency2 SCL clock low time SCL clock high time SDA set-up time SDA hold time3 Repeated START condition set-up time Symbol fSCL tLOW tHIGH tSU_DAT tHD_DAT tSU_STA
(Repeated) START condition hold time tHD_STA STOP condition set-up time Bus free time between a STOP and START condition Note:
tSU_STO tBUF Table 4.26. I2C Standard-mode (Sm)1 Test Condition Min 0 4.7 4 250 100 4.7 4 4 4.7 Typ Max 100 3450 Unit kHz s s ns ns s s s s 1. For CLHR set to 0 in the I2Cn_CTRL register. 2. For the minimum HFPERCLK frequency required in Standard-mode, refer to the I2C chapter in the reference manual. 3. The maximum SDA hold time (tHD_DAT) needs to be met only when the device does not stretch the low time of SCL (tLOW). silabs.com | Building a more connected world. Rev. 1.0 | 41 4.1.16.2 I2C Fast-mode (Fm)1 Parameter SCL clock frequency2 SCL clock low time SCL clock high time SDA set-up time SDA hold time3 Repeated START condition set-up time Symbol fSCL tLOW tHIGH tSU_DAT tHD_DAT tSU_STA
(Repeated) START condition hold time tHD_STA STOP condition set-up time Bus free time between a STOP and START condition Note:
tSU_STO tBUF Table 4.27. I2C Fast-mode (Fm)1 Test Condition BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Min 0 1.3 0.6 100 100 0.6 0.6 0.6 1.3 Typ Max 400 900 Unit kHz s s ns ns s s s s 1. For CLHR set to 1 in the I2Cn_CTRL register. 2. For the minimum HFPERCLK frequency required in Fast-mode, refer to the I2C chapter in the reference manual. 3. The maximum SDA hold time (tHD,DAT) needs to be met only when the device does not stretch the low time of SCL (tLOW). silabs.com | Building a more connected world. Rev. 1.0 | 42 BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Table 4.28. I2C Fast-mode Plus (Fm+)1 Test Condition Min 0 0.5 0.26 50 100 0.26 0.26 0.26 0.5 Typ Max 1000 Unit kHz s s ns ns s s s s 4.1.16.3 I2C Fast-mode Plus (Fm+)1 Parameter SCL clock frequency2 SCL clock low time SCL clock high time SDA set-up time SDA hold time Repeated START condition set-up time Symbol fSCL tLOW tHIGH tSU_DAT tHD_DAT tSU_STA
(Repeated) START condition hold time tHD_STA STOP condition set-up time Bus free time between a STOP and START condition Note:
tSU_STO tBUF 1. For CLHR set to 0 or 1 in the I2Cn_CTRL register. 2. For the minimum HFPERCLK frequency required in Fast-mode Plus, refer to the I2C chapter in the reference manual. silabs.com | Building a more connected world. Rev. 1.0 | 43 4.1.17 USART SPI SPI Master Timing Parameter SCLK period 1 3 2 CS to MOSI 1 3 SCLK to MOSI 1 3 MISO setup time 1 3 MISO hold time 1 3 Note:
Symbol tSCLK tCS_MO tSCLK_MO tSU_MI tH_MI BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Table 4.29. SPI Master Timing Test Condition Min Typ Max Unit 2 *
tHFPERCLK
-12.5
-8.5 90 42
-9 14 10.5 ns ns ns ns ns ns IOVDD = 1.62 V IOVDD = 3.0 V 1. Applies for both CLKPHA = 0 and CLKPHA = 1 (figure only shows CLKPHA = 0). 2. tHFPERCLK is one period of the selected HFPERCLK. 3. Measurement done with 8 pF output loading at 10% and 90% of VDD (figure shows 50% of VDD). CS SCLK CLKPOL = 0 SCLK CLKPOL = 1 MOSI MISO tCS_MO tSCKL_MO tSCLK tSU_MI tH_MI Figure 4.1. SPI Master Timing Diagram silabs.com | Building a more connected world. Rev. 1.0 | 44 SPI Slave Timing Parameter SCLK period 1 3 2 SCLK high time1 3 2 Symbol tSCLK tSCLK_HI SCLK low time1 3 2 tSCLK_LO CS active to MISO 1 3 CS disable to MISO 1 3 MOSI setup time 1 3 MOSI hold time 1 3 2 SCLK to MISO 1 3 2 Note:
tCS_ACT_MI tCS_DIS_MI tSU_MO tH_MO tSCLK_MI BGM13P Blue Gecko Bluetooth Module Data Sheet Electrical Specifications Table 4.30. SPI Slave Timing Test Condition Min Typ Max Unit 6 *
tHFPERCLK 2.5 *
tHFPERCLK 2.5 *
tHFPERCLK 4 4 12.5 13 6 + 1.5 *
tHFPERCLK 70 50 45 + 2.5 *
tHFPERCLK ns ns ns ns ns ns ns ns 1. Applies for both CLKPHA = 0 and CLKPHA = 1 (figure only shows CLKPHA = 0). 2. tHFPERCLK is one period of the selected HFPERCLK. 3. Measurement done with 8 pF output loading at 10% and 90% of VDD (figure shows 50% of VDD). CS SCLK CLKPOL = 0 SCLK CLKPOL = 1 MOSI MISO tCS_ACT_MI tCS_DIS_MI tSCLK_HI tSCLK_LO tSU_MO tH_MO tSCLK tSCLK_MI Figure 4.2. SPI Slave Timing Diagram silabs.com | Building a more connected world. Rev. 1.0 | 45 BGM13P Blue Gecko Bluetooth Module Data Sheet Typical Connection Diagrams 5. Typical Connection Diagrams 5.1 Network Co-Processor (NCP) Application with UART Host The BGM13P can be controlled over the UART interface as a peripheral to an external host processor. Typical power supply, program-
ming/debug, and host interface connections are shown in the figure below. Refer to AN958: Debugging and Programming Interfaces for Custom Designs for more details.
+3.3 V RESETn D D V I O P G Host CPU S S V RX TX RTS CTS GND PD13 PD14 PD15 PA0 PA1 PA2 PA3 PA4 PA5 PB11 GND GND RESETn VDD PF7 PF6 PF5 PF4 PF3 PF2 PF1 PF0 GND Wireless Module 3 1 B P 6 C P 7 C P 8 C P 9 C P 0 1 C P 1 1 C P PTI_FRAME PTI_DATA
(optional) RESETn
+3.3 V
+3.3 V RESETn TMS / SWDIO (PF1) PTI_FRAME (PB13) 1 3 5 7 9 2 4 6 8 10 TDO / SWO (PF2) TCK / SWCLK (PF0) PTI_DATA (PB11) Mini Simplicity Debug Connector TDI TDO / SWO TMS / SWDIO TCK / SWCLK Figure 5.1. Connection Diagram: UART NCP Configuration 5.2 SoC Application The BGM13P can be used in a standalone SoC configuration with no external host processor. Typical power supply and programming/
debug connections are shown in the figure below. Refer to AN958: Debugging and Programming Interfaces for Custom Designs for more details.
+3.3 V RESETn TMS / SWDIO (PF1) PTI_FRAME (PB13) 1 3 5 7 9 2 4 6 8 10 TDO / SWO (PF2) TCK / SWCLK (PF0) PTI_DATA (PB11) Mini Simplicity Debug Connector PTI_DATA
(optional) PTI_FRAME GND PD13 PD14 PD15 PA0 PA1 PA2 PA3 PA4 PA5 PB11 GND GND RESETn VDD PF7 PF6 PF5 PF4 PF3 PF2 PF1 PF0 GND Wireless Module 3 1 B P 6 C P 7 C P 8 C P 9 C P 0 1 C P 1 1 C P RESETn
+3.3 V
+3.3 V D D V TDI TDO / SWO TMS / SWDIO TCK / SWCLK nCS SCLK MISO MOSI Serial Flash
(optional) S S V Figure 5.2. Connection Diagram: SoC Configuration silabs.com | Building a more connected world. Rev. 1.0 | 46 BGM13P Blue Gecko Bluetooth Module Data Sheet Layout Guidelines 6. Layout Guidelines For optimal performance of the BGM13P (with integrated antenna), please follow the PCB layout guidelines and ground plane recom-
mendations indicated in this section. 6.1 Module Placement and Application PCB Layout Guidelines Place the module at the edge of the PCB, as shown in Figure 6.1 Recommended Application PCB Layout for BGM13P with Integra-
ted Antenna on page 47. Do not place any metal (traces, components, battery, etc.) within the clearance area of the antenna. Connect all ground pads directly to a solid ground plane. Place the ground vias as close to the ground pads as possible. Do not place plastic or any other dielectric material in contact with the antenna. Align module edge with PCB edge GND Antenna Clearance No metal in this area GND Place vias close to each of the modules GND pads Wireless Module
(Top View) GND GND Place vias along all PCB edges Figure 6.1. Recommended Application PCB Layout for BGM13P with Integrated Antenna silabs.com | Building a more connected world. Rev. 1.0 | 47 Figure 6.2 Non-optimal Module Placements for BGM13P with Integrated Antenna on page 48 shows examples of layouts that will result in severely degraded RF performance. BGM13P Blue Gecko Bluetooth Module Data Sheet Layout Guidelines Figure 6.2. Non-optimal Module Placements for BGM13P with Integrated Antenna The amount of ground plane surrounding the sides of the module will also impact the maximum RF range, as shown in Figure 6.3 Impact of GND Plane Size vs. Range for BGM13P on page 48. Figure 6.3. Impact of GND Plane Size vs. Range for BGM13P 6.2 Effect of Plastic and Metal Materials Do not place plastic or any other dielectric material in close proximity to the antenna. Any metallic objects in close proximity to the antenna will prevent the antenna from radiating freely. The minimum recommended dis-
tance of metallic and/or conductive objects is 10 mm in any direction from the antenna except in the directions of the application PCB ground planes. 6.3 Locating the Module Close to Human Body Placing the module in contact with or very close to the human body will negatively impact antenna efficiency and reduce range. silabs.com | Building a more connected world. Rev. 1.0 | 48 6.4 2D Radiation Pattern Plots BGM13P Blue Gecko Bluetooth Module Data Sheet Layout Guidelines Figure 6.4. Typical 2D Radiation Pattern Front View Figure 6.5. Typical 2D Radiation Pattern Side View silabs.com | Building a more connected world. Rev. 1.0 | 49 BGM13P Blue Gecko Bluetooth Module Data Sheet Layout Guidelines Figure 6.6. Typical 2D Radiation Pattern Top View silabs.com | Building a more connected world. Rev. 1.0 | 50 BGM13P Blue Gecko Bluetooth Module Data Sheet Hardware Design Guidelines 7. Hardware Design Guidelines The BGM13P is an easy-to-use module with regard to hardware application design. The additional guidelines in this section should be followed to guarantee optimal performance. 7.1 Power Supply Requirements Coin cell batteries cannot withstand high peak currents (e.g. higher than 15 mA). If the peak current exceeds 15 mA it is recommended to place a 47 - 100 F capacitor in parallel with the coin cell battery to improve battery life time. Note that the total current consumption of the application is a combination of the radio, peripherals and MCU current consumption, and all power consumers must be taken into account. BGM13P should be powered by a unipolar supply voltage with nominal value of 3.3 V. 7.2 Reset Functions The BGM13P can be reset by three different methods: by pulling the RESET line low, by the internal watchdog timer or by software command. The reset state in BGM13P does not provide any power saving functionality and is not recommended as a means to con-
serve power. BGM13P has an internal system power-up reset function. The RESET pin includes an on-chip pull-up resistor and can be left unconnected if no external reset switch or source is used. 7.3 Debug and Firmware Updates This section contains information on debugging and firmware update methods. For additional information, refer to the following applica-
tion note: AN958: Debugging and Programming Interfaces for Custom Designs. 7.3.1 Programming and Debug Connections It is recommended to expose the debug pins in your own hardware design for firmware update and debug purposes. The following table lists the required pins for JTAG connection and SWD connections. Certain debug pins have internal pull-down or pull-ups enabled by default, and leaving them enabled may increase current consumption if left connected to supply or ground. If the JTAG pins are enabled, the module must be power cycled to return to a SWD debug config-
uration. Table 7.1. Debug Pins Pin Name Pin Number JTAG Signal SWD Signal Comments PF3 PF2 PF1 PF0 24 23 22 21 TDI TDO TMS TCK N/A N/A SWDIO SWCLK This pin is disabled after reset. Once enabled the pin has a built-in pull-up. This pin is disabled after reset. Pin is enabled after reset and has a built-in pull-up. Pin is enabled after reset and has a built-in pull-down. 7.3.2 Packet Trace Interface (PTI) The BGM13P integrates a true PHY-level packet trace interface (PTI) with the MAC, allowing complete, non-intrusive capture of all packets to and from the EFR32 Wireless STK development tools. The PTI_DATA and PTI_FRAME signals are accessed via the PB11 and PB12 pins, respectively. silabs.com | Building a more connected world. Rev. 1.0 | 51 8. Pin Definitions 8.1 BGM13P Device Pinout BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions Figure 8.1. BGM13P Device Pinout The following table provides package pin connections and general descriptions of pin functionality. For detailed information on the sup-
ported features for each GPIO pin, see 8.2 GPIO Functionality Table or 8.3 Alternate Functionality Overview. Table 8.1. BGM13P Device Pinout Pin Name Pin(s) Description Pin Name Pin(s) Description GND PD14 PA0 PA2 1 12 20 31 3 5 7 Ground GPIO GPIO GPIO PD13 PD15 PA1 PA3 2 4 6 8 GPIO GPIO GPIO GPIO silabs.com | Building a more connected world. Rev. 1.0 | 52 Pin Name Pin(s) Description Pin Name Pin(s) Description BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions PA4 PB11 PC6 PC8 PC10 PF0 PF2 PF4 PF6 9 11 14 16 18 21 23 25 27 GPIO GPIO GPIO (5V) GPIO (5V) GPIO (5V) GPIO (5V) GPIO (5V) GPIO (5V) GPIO (5V) PA5 PB13 PC7 PC9 PC11 PF1 PF3 PF5 PF7 VDD 29 Module Power Supply RESETn Note:
1. GPIO with 5V tolerance are indicated by (5V). 10 13 15 17 19 22 24 26 28 30 GPIO (5V) GPIO GPIO (5V) GPIO (5V) GPIO (5V) GPIO (5V) GPIO (5V) GPIO (5V) GPIO (5V) Reset input, active low. To apply an ex-
ternal reset source to this pin, it is re-
quired to only drive this pin low during reset, and let the internal pull-up ensure that reset is released. silabs.com | Building a more connected world. Rev. 1.0 | 53 BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions 8.2 GPIO Functionality Table A wide selection of alternate functionality is available for multiplexing to various pins. The following table shows the name of each GPIO pin, followed by the functionality available on that pin. Refer to 8.3 Alternate Functionality Overview for a list of GPIO locations available for each function. Table 8.2. GPIO Functionality Table GPIO Name Pin Alternate Functionality / Description Analog Timers Communication Radio Other PD13 VDAC0_OUT0ALT /
OPA0_OUTALT #1 BUSCY BUSDX OPA1_P PD14 BUSDY BUSCX VDAC0_OUT1 /
OPA1_OUT PD15 VDAC0_OUT0ALT /
OPA0_OUTALT #2 BUSCY BUSDX OPA1_N TIM0_CC0 #21 TIM0_CC1 #20 TIM0_CC2 #19 TIM0_CDTI0 #18 TIM0_CDTI1 #17 TIM0_CDTI2 #16 TIM1_CC0 #21 TIM1_CC1 #20 TIM1_CC2 #19 TIM1_CC3 #18 WTIM0_CDTI0 #29 WTIM0_CDTI1 #27 WTIM0_CDTI2 #25 LETIM0_OUT0 #21 LETIM0_OUT1 #20 PCNT0_S0IN #21 PCNT0_S1IN #20 TIM0_CC0 #22 TIM0_CC1 #21 TIM0_CC2 #20 TIM0_CDTI0 #19 TIM0_CDTI1 #18 TIM0_CDTI2 #17 TIM1_CC0 #22 TIM1_CC1 #21 TIM1_CC2 #20 TIM1_CC3 #19 WTIM0_CDTI0 #30 WTIM0_CDTI1 #28 WTIM0_CDTI2 #26 LETIM0_OUT0 #22 LETIM0_OUT1 #21 PCNT0_S0IN #22 PCNT0_S1IN #21 TIM0_CC0 #23 TIM0_CC1 #22 TIM0_CC2 #21 TIM0_CDTI0 #20 TIM0_CDTI1 #19 TIM0_CDTI2 #18 TIM1_CC0 #23 TIM1_CC1 #22 TIM1_CC2 #21 TIM1_CC3 #20 WTIM0_CDTI0 #31 WTIM0_CDTI1 #29 WTIM0_CDTI2 #27 LETIM0_OUT0 #23 LETIM0_OUT1 #22 PCNT0_S0IN #23 PCNT0_S1IN #22 US0_TX #21 US0_RX #20 US0_CLK #19 US0_CS #18 US0_CTS #17 US0_RTS #16 US1_TX #21 US1_RX #20 US1_CLK #19 US1_CS #18 US1_CTS #17 US1_RTS #16 LEU0_TX #21 LEU0_RX #20 I2C0_SDA #21 I2C0_SCL #20 US0_TX #22 US0_RX #21 US0_CLK #20 US0_CS #19 US0_CTS #18 US0_RTS #17 US1_TX #22 US1_RX #21 US1_CLK #20 US1_CS #19 US1_CTS #18 US1_RTS #17 LEU0_TX #22 LEU0_RX #21 I2C0_SDA #22 I2C0_SCL #21 US0_TX #23 US0_RX #22 US0_CLK #21 US0_CS #20 US0_CTS #19 US0_RTS #18 US1_TX #23 US1_RX #22 US1_CLK #21 US1_CS #20 US1_CTS #19 US1_RTS #18 LEU0_TX #23 LEU0_RX #22 I2C0_SDA #23 I2C0_SCL #22 FRC_DCLK #21 FRC_DOUT #20 FRC_DFRAME #19 MODEM_DCLK #21 MODEM_DIN #20 MODEM_DOUT #19 MODEM_ANT0 #18 MODEM_ANT1 #17 PRS_CH3 #12 PRS_CH4 #4 PRS_CH5 #3 PRS_CH6 #15 ACMP0_O #21 ACMP1_O #21 LES_CH5 FRC_DCLK #22 FRC_DOUT #21 FRC_DFRAME #20 MODEM_DCLK #22 MODEM_DIN #21 MODEM_DOUT #20 MODEM_ANT0 #19 MODEM_ANT1 #18 FRC_DCLK #23 FRC_DOUT #22 FRC_DFRAME #21 MODEM_DCLK #23 MODEM_DIN #22 MODEM_DOUT #21 MODEM_ANT0 #20 MODEM_ANT1 #19 CMU_CLK0 #5 PRS_CH3 #13 PRS_CH4 #5 PRS_CH5 #4 PRS_CH6 #16 ACMP0_O #22 ACMP1_O #22 LES_CH6 GPIO_EM4WU4 CMU_CLK1 #5 PRS_CH3 #14 PRS_CH4 #6 PRS_CH5 #5 PRS_CH6 #17 ACMP0_O #23 ACMP1_O #23 LES_CH7 DBG_SWO #2 silabs.com | Building a more connected world. Rev. 1.0 | 54 GPIO Name Pin Alternate Functionality / Description Analog Timers Communication Radio Other BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions PA0 BUSDY BUSCX ADC0_EXTN PA1 BUSCY BUSDX ADC0_EXTP VDAC0_EXT PA2 VDAC0_OUT1ALT /
OPA1_OUTALT #1 BUSDY BUSCX OPA0_P TIM0_CC0 #0 TIM0_CC1 #31 TIM0_CC2 #30 TIM0_CDTI0 #29 TIM0_CDTI1 #28 TIM0_CDTI2 #27 TIM1_CC0 #0 TIM1_CC1 #31 TIM1_CC2 #30 TIM1_CC3 #29 WTIM0_CC0 #0 LE-
TIM0_OUT0 #0 LE-
TIM0_OUT1 #31 PCNT0_S0IN #0 PCNT0_S1IN #31 TIM0_CC0 #1 TIM0_CC1 #0 TIM0_CC2 #31 TIM0_CDTI0 #30 TIM0_CDTI1 #29 TIM0_CDTI2 #28 TIM1_CC0 #1 TIM1_CC1 #0 TIM1_CC2 #31 TIM1_CC3 #30 WTIM0_CC0 #1 LE-
TIM0_OUT0 #1 LE-
TIM0_OUT1 #0 PCNT0_S0IN #1 PCNT0_S1IN #0 TIM0_CC0 #2 TIM0_CC1 #1 TIM0_CC2 #0 TIM0_CDTI0 #31 TIM0_CDTI1 #30 TIM0_CDTI2 #29 TIM1_CC0 #2 TIM1_CC1 #1 TIM1_CC2 #0 TIM1_CC3 #31 WTIM0_CC0 #2 WTIM0_CC1 #0 LE-
TIM0_OUT0 #2 LE-
TIM0_OUT1 #1 PCNT0_S0IN #2 PCNT0_S1IN #1 US0_TX #0 US0_RX
#31 US0_CLK #30 US0_CS #29 US0_CTS #28 US0_RTS #27 US1_TX #0 US1_RX
#31 US1_CLK #30 US1_CS #29 US1_CTS #28 US1_RTS #27 LEU0_TX #0 LEU0_RX #31 I2C0_SDA #0 I2C0_SCL #31 US0_TX #1 US0_RX
#0 US0_CLK #31 US0_CS #30 US0_CTS #29 US0_RTS #28 US1_TX #1 US1_RX
#0 US1_CLK #31 US1_CS #30 US1_CTS #29 US1_RTS #28 LEU0_TX #1 LEU0_RX #0 I2C0_SDA #1 I2C0_SCL #0 US0_TX #2 US0_RX
#1 US0_CLK #0 US0_CS #31 US0_CTS #30 US0_RTS #29 US1_TX #2 US1_RX
#1 US1_CLK #0 US1_CS #31 US1_CTS #30 US1_RTS #29 LEU0_TX #2 LEU0_RX #1 I2C0_SDA #2 I2C0_SCL #1 FRC_DCLK #0 FRC_DOUT #31 FRC_DFRAME #30 MODEM_DCLK #0 MODEM_DIN #31 MODEM_DOUT #30 MODEM_ANT0 #29 MODEM_ANT1 #28 CMU_CLK1 #0 PRS_CH6 #0 PRS_CH7 #10 PRS_CH8 #9 PRS_CH9 #8 ACMP0_O #0 ACMP1_O #0 LES_CH8 FRC_DCLK #1 FRC_DOUT #0 FRC_DFRAME #31 MODEM_DCLK #1 MODEM_DIN #0 MODEM_DOUT #31 MODEM_ANT0 #30 MODEM_ANT1 #29 CMU_CLK0 #0 PRS_CH6 #1 PRS_CH7 #0 PRS_CH8 #10 PRS_CH9 #9 ACMP0_O #1 ACMP1_O #1 LES_CH9 FRC_DCLK #2 FRC_DOUT #1 FRC_DFRAME #0 MODEM_DCLK #2 MODEM_DIN #1 MODEM_DOUT #0 MODEM_ANT0 #31 MODEM_ANT1 #30 PRS_CH6 #2 PRS_CH7 #1 PRS_CH8 #0 PRS_CH9 #10 ACMP0_O #2 ACMP1_O #2 LES_CH10 silabs.com | Building a more connected world. Rev. 1.0 | 55 GPIO Name Pin Alternate Functionality / Description Analog Timers Communication Radio Other BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions PA3 BUSCY BUSDX VDAC0_OUT0 /
OPA0_OUT PA4 VDAC0_OUT1ALT /
OPA1_OUTALT #2 BUSDY BUSCX OPA0_N PA5 VDAC0_OUT0ALT /
OPA0_OUTALT #0 BUSCY BUSDX TIM0_CC0 #3 TIM0_CC1 #2 TIM0_CC2 #1 TIM0_CDTI0 #0 TIM0_CDTI1 #31 TIM0_CDTI2 #30 TIM1_CC0 #3 TIM1_CC1 #2 TIM1_CC2 #1 TIM1_CC3 #0 WTIM0_CC0 #3 WTIM0_CC1 #1 LE-
TIM0_OUT0 #3 LE-
TIM0_OUT1 #2 PCNT0_S0IN #3 PCNT0_S1IN #2 TIM0_CC0 #4 TIM0_CC1 #3 TIM0_CC2 #2 TIM0_CDTI0 #1 TIM0_CDTI1 #0 TIM0_CDTI2 #31 TIM1_CC0 #4 TIM1_CC1 #3 TIM1_CC2 #2 TIM1_CC3 #1 WTIM0_CC0 #4 WTIM0_CC1 #2 WTIM0_CC2 #0 LE-
TIM0_OUT0 #4 LE-
TIM0_OUT1 #3 PCNT0_S0IN #4 PCNT0_S1IN #3 TIM0_CC0 #5 TIM0_CC1 #4 TIM0_CC2 #3 TIM0_CDTI0 #2 TIM0_CDTI1 #1 TIM0_CDTI2 #0 TIM1_CC0 #5 TIM1_CC1 #4 TIM1_CC2 #3 TIM1_CC3 #2 WTIM0_CC0 #5 WTIM0_CC1 #3 WTIM0_CC2 #1 LE-
TIM0_OUT0 #5 LE-
TIM0_OUT1 #4 PCNT0_S0IN #5 PCNT0_S1IN #4 US0_TX #3 US0_RX
#2 US0_CLK #1 US0_CS #0 US0_CTS #31 US0_RTS #30 US1_TX #3 US1_RX
#2 US1_CLK #1 US1_CS #0 US1_CTS #31 US1_RTS #30 LEU0_TX #3 LEU0_RX #2 I2C0_SDA #3 I2C0_SCL #2 US0_TX #4 US0_RX
#3 US0_CLK #2 US0_CS #1 US0_CTS #0 US0_RTS #31 US1_TX #4 US1_RX
#3 US1_CLK #2 US1_CS #1 US1_CTS #0 US1_RTS #31 LEU0_TX #4 LEU0_RX #3 I2C0_SDA #4 I2C0_SCL #3 US0_TX #5 US0_RX
#4 US0_CLK #3 US0_CS #2 US0_CTS #1 US0_RTS #0 US1_TX #5 US1_RX
#4 US1_CLK #3 US1_CS #2 US1_CTS #1 US1_RTS #0 US2_TX #0 US2_RX
#31 US2_CLK #30 US2_CS #29 US2_CTS #28 US2_RTS #27 LEU0_TX #5 LEU0_RX #4 I2C0_SDA #5 I2C0_SCL #4 FRC_DCLK #3 FRC_DOUT #2 FRC_DFRAME #1 MODEM_DCLK #3 MODEM_DIN #2 MODEM_DOUT #1 MODEM_ANT0 #0 MODEM_ANT1 #31 PRS_CH6 #3 PRS_CH7 #2 PRS_CH8 #1 PRS_CH9 #0 ACMP0_O #3 ACMP1_O #3 LES_CH11 GPIO_EM4WU8 FRC_DCLK #4 FRC_DOUT #3 FRC_DFRAME #2 MODEM_DCLK #4 MODEM_DIN #3 MODEM_DOUT #2 MODEM_ANT0 #1 MODEM_ANT1 #0 PRS_CH6 #4 PRS_CH7 #3 PRS_CH8 #2 PRS_CH9 #1 ACMP0_O #4 ACMP1_O #4 LES_CH12 FRC_DCLK #5 FRC_DOUT #4 FRC_DFRAME #3 MODEM_DCLK #5 MODEM_DIN #4 MODEM_DOUT #3 MODEM_ANT0 #2 MODEM_ANT1 #1 CMU_CLKI0 #4 PRS_CH6 #5 PRS_CH7 #4 PRS_CH8 #3 PRS_CH9 #2 ACMP0_O #5 ACMP1_O #5 LES_CH13 ETM_TCLK #1 silabs.com | Building a more connected world. Rev. 1.0 | 56 GPIO Name Pin Alternate Functionality / Description Analog Timers Communication Radio Other BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions PB11 BUSCY BUSDX OPA2_P PB13 BUSCY BUSDX OPA2_N PC6 BUSBY BUSAX TIM0_CC0 #6 TIM0_CC1 #5 TIM0_CC2 #4 TIM0_CDTI0 #3 TIM0_CDTI1 #2 TIM0_CDTI2 #1 TIM1_CC0 #6 TIM1_CC1 #5 TIM1_CC2 #4 TIM1_CC3 #3 WTIM0_CC0 #15 WTIM0_CC1 #13 WTIM0_CC2 #11 WTIM0_CDTI0 #7 WTIM0_CDTI1 #5 WTIM0_CDTI2 #3 LETIM0_OUT0 #6 LETIM0_OUT1 #5 PCNT0_S0IN #6 PCNT0_S1IN #5 TIM0_CC0 #8 TIM0_CC1 #7 TIM0_CC2 #6 TIM0_CDTI0 #5 TIM0_CDTI1 #4 TIM0_CDTI2 #3 TIM1_CC0 #8 TIM1_CC1 #7 TIM1_CC2 #6 TIM1_CC3 #5 WTIM0_CC0 #17 WTIM0_CC1 #15 WTIM0_CC2 #13 WTIM0_CDTI0 #9 WTIM0_CDTI1 #7 WTIM0_CDTI2 #5 LETIM0_OUT0 #8 LETIM0_OUT1 #7 PCNT0_S0IN #8 PCNT0_S1IN #7 TIM0_CC0 #11 TIM0_CC1 #10 TIM0_CC2 #9 TIM0_CDTI0 #8 TIM0_CDTI1 #7 TIM0_CDTI2 #6 TIM1_CC0 #11 TIM1_CC1 #10 TIM1_CC2 #9 TIM1_CC3 #8 WTIM0_CC0 #26 WTIM0_CC1 #24 WTIM0_CC2 #22 WTIM0_CDTI0 #18 WTIM0_CDTI1 #16 WTIM0_CDTI2 #14 LETIM0_OUT0 #11 LETIM0_OUT1 #10 PCNT0_S0IN #11 PCNT0_S1IN #10 US0_TX #6 US0_RX
#5 US0_CLK #4 US0_CS #3 US0_CTS #2 US0_RTS #1 US1_TX #6 US1_RX
#5 US1_CLK #4 US1_CS #3 US1_CTS #2 US1_RTS #1 LEU0_TX #6 LEU0_RX #5 I2C0_SDA #6 I2C0_SCL #5 US0_TX #8 US0_RX
#7 US0_CLK #6 US0_CS #5 US0_CTS #4 US0_RTS #3 US1_TX #8 US1_RX
#7 US1_CLK #6 US1_CS #5 US1_CTS #4 US1_RTS #3 LEU0_TX #8 LEU0_RX #7 I2C0_SDA #8 I2C0_SCL #7 FRC_DCLK #6 FRC_DOUT #5 FRC_DFRAME #4 MODEM_DCLK #6 MODEM_DIN #5 MODEM_DOUT #4 MODEM_ANT0 #3 MODEM_ANT1 #2 PRS_CH6 #6 PRS_CH7 #5 PRS_CH8 #4 PRS_CH9 #3 ACMP0_O #6 ACMP1_O #6 FRC_DCLK #8 FRC_DOUT #7 FRC_DFRAME #6 MODEM_DCLK #8 MODEM_DIN #7 MODEM_DOUT #6 MODEM_ANT0 #5 MODEM_ANT1 #4 CMU_CLKI0 #0 PRS_CH6 #8 PRS_CH7 #7 PRS_CH8 #6 PRS_CH9 #5 ACMP0_O #8 ACMP1_O #8 DBG_SWO #1 GPIO_EM4WU9 US0_TX #11 US0_RX #10 US0_CLK #9 US0_CS #8 US0_CTS #7 US0_RTS #6 US1_TX #11 US1_RX #10 US1_CLK #9 US1_CS #8 US1_CTS #7 US1_RTS #6 LEU0_TX #11 LEU0_RX #10 I2C0_SDA #11 I2C0_SCL #10 FRC_DCLK #11 FRC_DOUT #10 FRC_DFRAME #9 MODEM_DCLK #11 MODEM_DIN #10 MODEM_DOUT #9 MODEM_ANT0 #8 MODEM_ANT1 #7 CMU_CLK0 #2 CMU_CLKI0 #2 PRS_CH0 #8 PRS_CH9 #11 PRS_CH10 #0 PRS_CH11 #5 ACMP0_O #11 ACMP1_O #11 ETM_TCLK #3 silabs.com | Building a more connected world. Rev. 1.0 | 57 GPIO Name Pin Alternate Functionality / Description Analog Timers Communication Radio Other BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions PC7 BUSAY BUSBX PC8 BUSBY BUSAX PC9 BUSAY BUSBX TIM0_CC0 #12 TIM0_CC1 #11 TIM0_CC2 #10 TIM0_CDTI0 #9 TIM0_CDTI1 #8 TIM0_CDTI2 #7 TIM1_CC0 #12 TIM1_CC1 #11 TIM1_CC2 #10 TIM1_CC3 #9 WTIM0_CC0 #27 WTIM0_CC1 #25 WTIM0_CC2 #23 WTIM0_CDTI0 #19 WTIM0_CDTI1 #17 WTIM0_CDTI2 #15 LETIM0_OUT0 #12 LETIM0_OUT1 #11 PCNT0_S0IN #12 PCNT0_S1IN #11 TIM0_CC0 #13 TIM0_CC1 #12 TIM0_CC2 #11 TIM0_CDTI0 #10 TIM0_CDTI1 #9 TIM0_CDTI2 #8 TIM1_CC0 #13 TIM1_CC1 #12 TIM1_CC2 #11 TIM1_CC3 #10 WTIM0_CC0 #28 WTIM0_CC1 #26 WTIM0_CC2 #24 WTIM0_CDTI0 #20 WTIM0_CDTI1 #18 WTIM0_CDTI2 #16 LETIM0_OUT0 #13 LETIM0_OUT1 #12 PCNT0_S0IN #13 PCNT0_S1IN #12 TIM0_CC0 #14 TIM0_CC1 #13 TIM0_CC2 #12 TIM0_CDTI0 #11 TIM0_CDTI1 #10 TIM0_CDTI2 #9 TIM1_CC0 #14 TIM1_CC1 #13 TIM1_CC2 #12 TIM1_CC3 #11 WTIM0_CC0 #29 WTIM0_CC1 #27 WTIM0_CC2 #25 WTIM0_CDTI0 #21 WTIM0_CDTI1 #19 WTIM0_CDTI2 #17 LETIM0_OUT0 #14 LETIM0_OUT1 #13 PCNT0_S0IN #14 PCNT0_S1IN #13 US0_TX #12 US0_RX #11 US0_CLK #10 US0_CS #9 US0_CTS #8 US0_RTS #7 US1_TX #12 US1_RX #11 US1_CLK #10 US1_CS #9 US1_CTS #8 US1_RTS #7 LEU0_TX #12 LEU0_RX #11 I2C0_SDA #12 I2C0_SCL #11 US0_TX #13 US0_RX #12 US0_CLK #11 US0_CS #10 US0_CTS #9 US0_RTS #8 US1_TX #13 US1_RX #12 US1_CLK #11 US1_CS #10 US1_CTS #9 US1_RTS #8 LEU0_TX #13 LEU0_RX #12 I2C0_SDA #13 I2C0_SCL #12 US0_TX #14 US0_RX #13 US0_CLK #12 US0_CS #11 US0_CTS #10 US0_RTS #9 US1_TX #14 US1_RX #13 US1_CLK #12 US1_CS #11 US1_CTS #10 US1_RTS #9 LEU0_TX #14 LEU0_RX #13 I2C0_SDA #14 I2C0_SCL #13 FRC_DCLK #12 FRC_DOUT #11 FRC_DFRAME #10 MODEM_DCLK #12 MODEM_DIN #11 MODEM_DOUT #10 MODEM_ANT0 #9 MODEM_ANT1 #8 CMU_CLK1 #2 PRS_CH0 #9 PRS_CH9 #12 PRS_CH10 #1 PRS_CH11 #0 ACMP0_O #12 ACMP1_O #12 ETM_TD0 FRC_DCLK #13 FRC_DOUT #12 FRC_DFRAME #11 MODEM_DCLK #13 MODEM_DIN #12 MODEM_DOUT #11 MODEM_ANT0 #10 MODEM_ANT1 #9 PRS_CH0 #10 PRS_CH9 #13 PRS_CH10 #2 PRS_CH11 #1 ACMP0_O #13 ACMP1_O #13 ETM_TD1 FRC_DCLK #14 FRC_DOUT #13 FRC_DFRAME #12 MODEM_DCLK #14 MODEM_DIN #13 MODEM_DOUT #12 MODEM_ANT0 #11 MODEM_ANT1 #10 PRS_CH0 #11 PRS_CH9 #14 PRS_CH10 #3 PRS_CH11 #2 ACMP0_O #14 ACMP1_O #14 ETM_TD2 silabs.com | Building a more connected world. Rev. 1.0 | 58 GPIO Name Pin Alternate Functionality / Description Analog Timers Communication Radio Other BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions PC10 BUSBY BUSAX PC11 BUSAY BUSBX TIM0_CC0 #15 TIM0_CC1 #14 TIM0_CC2 #13 TIM0_CDTI0 #12 TIM0_CDTI1 #11 TIM0_CDTI2 #10 TIM1_CC0 #15 TIM1_CC1 #14 TIM1_CC2 #13 TIM1_CC3 #12 WTIM0_CC0 #30 WTIM0_CC1 #28 WTIM0_CC2 #26 WTIM0_CDTI0 #22 WTIM0_CDTI1 #20 WTIM0_CDTI2 #18 LETIM0_OUT0 #15 LETIM0_OUT1 #14 PCNT0_S0IN #15 PCNT0_S1IN #14 TIM0_CC0 #16 TIM0_CC1 #15 TIM0_CC2 #14 TIM0_CDTI0 #13 TIM0_CDTI1 #12 TIM0_CDTI2 #11 TIM1_CC0 #16 TIM1_CC1 #15 TIM1_CC2 #14 TIM1_CC3 #13 WTIM0_CC0 #31 WTIM0_CC1 #29 WTIM0_CC2 #27 WTIM0_CDTI0 #23 WTIM0_CDTI1 #21 WTIM0_CDTI2 #19 LETIM0_OUT0 #16 LETIM0_OUT1 #15 PCNT0_S0IN #16 PCNT0_S1IN #15 US0_TX #15 US0_RX #14 US0_CLK #13 US0_CS #12 US0_CTS #11 US0_RTS #10 US1_TX #15 US1_RX #14 US1_CLK #13 US1_CS #12 US1_CTS #11 US1_RTS #10 LEU0_TX #15 LEU0_RX #14 I2C0_SDA #15 I2C0_SCL #14 I2C1_SDA #19 I2C1_SCL #18 US0_TX #16 US0_RX #15 US0_CLK #14 US0_CS #13 US0_CTS #12 US0_RTS #11 US1_TX #16 US1_RX #15 US1_CLK #14 US1_CS #13 US1_CTS #12 US1_RTS #11 LEU0_TX #16 LEU0_RX #15 I2C0_SDA #16 I2C0_SCL #15 I2C1_SDA #20 I2C1_SCL #19 FRC_DCLK #15 FRC_DOUT #14 FRC_DFRAME #13 MODEM_DCLK #15 MODEM_DIN #14 MODEM_DOUT #13 MODEM_ANT0 #12 MODEM_ANT1 #11 CMU_CLK1 #3 PRS_CH0 #12 PRS_CH9 #15 PRS_CH10 #4 PRS_CH11 #3 ACMP0_O #15 ACMP1_O #15 ETM_TD3 GPIO_EM4WU12 FRC_DCLK #16 FRC_DOUT #15 FRC_DFRAME #14 MODEM_DCLK #16 MODEM_DIN #15 MODEM_DOUT #14 MODEM_ANT0 #13 MODEM_ANT1 #12 CMU_CLK0 #3 PRS_CH0 #13 PRS_CH9 #16 PRS_CH10 #5 PRS_CH11 #4 ACMP0_O #16 ACMP1_O #16 DBG_SWO #3 silabs.com | Building a more connected world. Rev. 1.0 | 59 GPIO Name Pin Alternate Functionality / Description Analog Timers Communication Radio Other BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions PF0 BUSBY BUSAX PF1 BUSAY BUSBX PF2 BUSBY BUSAX TIM0_CC0 #24 TIM0_CC1 #23 TIM0_CC2 #22 TIM0_CDTI0 #21 TIM0_CDTI1 #20 TIM0_CDTI2 #19 TIM1_CC0 #24 TIM1_CC1 #23 TIM1_CC2 #22 TIM1_CC3 #21 WTIM0_CDTI1 #30 WTIM0_CDTI2 #28 LETIM0_OUT0 #24 LETIM0_OUT1 #23 PCNT0_S0IN #24 PCNT0_S1IN #23 TIM0_CC0 #25 TIM0_CC1 #24 TIM0_CC2 #23 TIM0_CDTI0 #22 TIM0_CDTI1 #21 TIM0_CDTI2 #20 TIM1_CC0 #25 TIM1_CC1 #24 TIM1_CC2 #23 TIM1_CC3 #22 WTIM0_CDTI1 #31 WTIM0_CDTI2 #29 LETIM0_OUT0 #25 LETIM0_OUT1 #24 PCNT0_S0IN #25 PCNT0_S1IN #24 TIM0_CC0 #26 TIM0_CC1 #25 TIM0_CC2 #24 TIM0_CDTI0 #23 TIM0_CDTI1 #22 TIM0_CDTI2 #21 TIM1_CC0 #26 TIM1_CC1 #25 TIM1_CC2 #24 TIM1_CC3 #23 WTIM0_CDTI2 #30 LETIM0_OUT0 #26 LETIM0_OUT1 #25 PCNT0_S0IN #26 PCNT0_S1IN #25 US0_TX #24 US0_RX #23 US0_CLK #22 US0_CS #21 US0_CTS #20 US0_RTS #19 US1_TX #24 US1_RX #23 US1_CLK #22 US1_CS #21 US1_CTS #20 US1_RTS #19 US2_TX #14 US2_RX #13 US2_CLK #12 US2_CS #11 US2_CTS #10 US2_RTS #9 LEU0_TX #24 LEU0_RX #23 I2C0_SDA #24 I2C0_SCL #23 US0_TX #25 US0_RX #24 US0_CLK #23 US0_CS #22 US0_CTS #21 US0_RTS #20 US1_TX #25 US1_RX #24 US1_CLK #23 US1_CS #22 US1_CTS #21 US1_RTS #20 US2_TX #15 US2_RX #14 US2_CLK #13 US2_CS #12 US2_CTS #11 US2_RTS #10 LEU0_TX #25 LEU0_RX #24 I2C0_SDA #25 I2C0_SCL #24 US0_TX #26 US0_RX #25 US0_CLK #24 US0_CS #23 US0_CTS #22 US0_RTS #21 US1_TX #26 US1_RX #25 US1_CLK #24 US1_CS #23 US1_CTS #22 US1_RTS #21 LEU0_TX #26 LEU0_RX #25 I2C0_SDA #26 I2C0_SCL #25 FRC_DCLK #24 FRC_DOUT #23 FRC_DFRAME #22 MODEM_DCLK #24 MODEM_DIN #23 MODEM_DOUT #22 MODEM_ANT0 #21 MODEM_ANT1 #20 FRC_DCLK #25 FRC_DOUT #24 FRC_DFRAME #23 MODEM_DCLK #25 MODEM_DIN #24 MODEM_DOUT #23 MODEM_ANT0 #22 MODEM_ANT1 #21 FRC_DCLK #26 FRC_DOUT #25 FRC_DFRAME #24 MODEM_DCLK #26 MODEM_DIN #25 MODEM_DOUT #24 MODEM_ANT0 #23 MODEM_ANT1 #22 PRS_CH0 #0 PRS_CH1 #7 PRS_CH2 #6 PRS_CH3 #5 ACMP0_O #24 ACMP1_O #24 DBG_SWCLKTCK BOOT_TX PRS_CH0 #1 PRS_CH1 #0 PRS_CH2 #7 PRS_CH3 #6 ACMP0_O #25 ACMP1_O #25 DBG_SWDIOTMS BOOT_RX CMU_CLK0 #6 PRS_CH0 #2 PRS_CH1 #1 PRS_CH2 #0 PRS_CH3 #7 ACMP0_O #26 ACMP1_O #26 DBG_TDO DBG_SWO #0 GPIO_EM4WU0 silabs.com | Building a more connected world. Rev. 1.0 | 60 GPIO Name Pin Alternate Functionality / Description Analog Timers Communication Radio Other BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions PF3 BUSAY BUSBX TIM0_CC0 #27 TIM0_CC1 #26 TIM0_CC2 #25 TIM0_CDTI0 #24 TIM0_CDTI1 #23 TIM0_CDTI2 #22 TIM1_CC0 #27 TIM1_CC1 #26 TIM1_CC2 #25 TIM1_CC3 #24 WTIM0_CDTI2 #31 LETIM0_OUT0 #27 LETIM0_OUT1 #26 PCNT0_S0IN #27 PCNT0_S1IN #26 PF4 BUSBY BUSAX TIM0_CC0 #28 TIM0_CC1 #27 TIM0_CC2 #26 TIM0_CDTI0 #25 TIM0_CDTI1 #24 TIM0_CDTI2 #23 TIM1_CC0 #28 TIM1_CC1 #27 TIM1_CC2 #26 TIM1_CC3 #25 LE-
TIM0_OUT0 #28 LE-
TIM0_OUT1 #27 PCNT0_S0IN #28 PCNT0_S1IN #27 US0_TX #27 US0_RX #26 US0_CLK #25 US0_CS #24 US0_CTS #23 US0_RTS #22 US1_TX #27 US1_RX #26 US1_CLK #25 US1_CS #24 US1_CTS #23 US1_RTS #22 US2_TX #16 US2_RX #15 US2_CLK #14 US2_CS #13 US2_CTS #12 US2_RTS #11 LEU0_TX #27 LEU0_RX #26 I2C0_SDA #27 I2C0_SCL #26 US0_TX #28 US0_RX #27 US0_CLK #26 US0_CS #25 US0_CTS #24 US0_RTS #23 US1_TX #28 US1_RX #27 US1_CLK #26 US1_CS #25 US1_CTS #24 US1_RTS #23 US2_TX #17 US2_RX #16 US2_CLK #15 US2_CS #14 US2_CTS #13 US2_RTS #12 LEU0_TX #28 LEU0_RX #27 I2C0_SDA #28 I2C0_SCL #27 FRC_DCLK #27 FRC_DOUT #26 FRC_DFRAME #25 MODEM_DCLK #27 MODEM_DIN #26 MODEM_DOUT #25 MODEM_ANT0 #24 MODEM_ANT1 #23 CMU_CLK1 #6 PRS_CH0 #3 PRS_CH1 #2 PRS_CH2 #1 PRS_CH3 #0 ACMP0_O #27 ACMP1_O #27 DBG_TDI FRC_DCLK #28 FRC_DOUT #27 FRC_DFRAME #26 MODEM_DCLK #28 MODEM_DIN #27 MODEM_DOUT #26 MODEM_ANT0 #25 MODEM_ANT1 #24 PRS_CH0 #4 PRS_CH1 #3 PRS_CH2 #2 PRS_CH3 #1 ACMP0_O #28 ACMP1_O #28 silabs.com | Building a more connected world. Rev. 1.0 | 61 GPIO Name Pin Alternate Functionality / Description Analog Timers Communication Radio Other BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions PF5 BUSAY BUSBX PF6 BUSBY BUSAX TIM0_CC0 #29 TIM0_CC1 #28 TIM0_CC2 #27 TIM0_CDTI0 #26 TIM0_CDTI1 #25 TIM0_CDTI2 #24 TIM1_CC0 #29 TIM1_CC1 #28 TIM1_CC2 #27 TIM1_CC3 #26 LE-
TIM0_OUT0 #29 LE-
TIM0_OUT1 #28 PCNT0_S0IN #29 PCNT0_S1IN #28 TIM0_CC0 #30 TIM0_CC1 #29 TIM0_CC2 #28 TIM0_CDTI0 #27 TIM0_CDTI1 #26 TIM0_CDTI2 #25 TIM1_CC0 #30 TIM1_CC1 #29 TIM1_CC2 #28 TIM1_CC3 #27 LE-
TIM0_OUT0 #30 LE-
TIM0_OUT1 #29 PCNT0_S0IN #30 PCNT0_S1IN #29 US0_TX #29 US0_RX #28 US0_CLK #27 US0_CS #26 US0_CTS #25 US0_RTS #24 US1_TX #29 US1_RX #28 US1_CLK #27 US1_CS #26 US1_CTS #25 US1_RTS #24 US2_TX #18 US2_RX #17 US2_CLK #16 US2_CS #15 US2_CTS #14 US2_RTS #13 LEU0_TX #29 LEU0_RX #28 I2C0_SDA #29 I2C0_SCL #28 US0_TX #30 US0_RX #29 US0_CLK #28 US0_CS #27 US0_CTS #26 US0_RTS #25 US1_TX #30 US1_RX #29 US1_CLK #28 US1_CS #27 US1_CTS #26 US1_RTS #25 US2_TX #19 US2_RX #18 US2_CLK #17 US2_CS #16 US2_CTS #15 US2_RTS #14 LEU0_TX #30 LEU0_RX #29 I2C0_SDA #30 I2C0_SCL #29 FRC_DCLK #29 FRC_DOUT #28 FRC_DFRAME #27 MODEM_DCLK #29 MODEM_DIN #28 MODEM_DOUT #27 MODEM_ANT0 #26 MODEM_ANT1 #25 PRS_CH0 #5 PRS_CH1 #4 PRS_CH2 #3 PRS_CH3 #2 ACMP0_O #29 ACMP1_O #29 FRC_DCLK #30 FRC_DOUT #29 FRC_DFRAME #28 MODEM_DCLK #30 MODEM_DIN #29 MODEM_DOUT #28 MODEM_ANT0 #27 MODEM_ANT1 #26 CMU_CLK1 #7 PRS_CH0 #6 PRS_CH1 #5 PRS_CH2 #4 PRS_CH3 #3 ACMP0_O #30 ACMP1_O #30 silabs.com | Building a more connected world. Rev. 1.0 | 62 GPIO Name Pin Alternate Functionality / Description Analog Timers Communication Radio Other BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions PF7 BUSAY BUSBX TIM0_CC0 #31 TIM0_CC1 #30 TIM0_CC2 #29 TIM0_CDTI0 #28 TIM0_CDTI1 #27 TIM0_CDTI2 #26 TIM1_CC0 #31 TIM1_CC1 #30 TIM1_CC2 #29 TIM1_CC3 #28 LE-
TIM0_OUT0 #31 LE-
TIM0_OUT1 #30 PCNT0_S0IN #31 PCNT0_S1IN #30 US0_TX #31 US0_RX #30 US0_CLK #29 US0_CS #28 US0_CTS #27 US0_RTS #26 US1_TX #31 US1_RX #30 US1_CLK #29 US1_CS #28 US1_CTS #27 US1_RTS #26 US2_TX #20 US2_RX #19 US2_CLK #18 US2_CS #17 US2_CTS #16 US2_RTS #15 LEU0_TX #31 LEU0_RX #30 I2C0_SDA #31 I2C0_SCL #30 FRC_DCLK #31 FRC_DOUT #30 FRC_DFRAME #29 MODEM_DCLK #31 MODEM_DIN #30 MODEM_DOUT #29 MODEM_ANT0 #28 MODEM_ANT1 #27 CMU_CLKI0 #1 CMU_CLK0 #7 PRS_CH0 #7 PRS_CH1 #6 PRS_CH2 #5 PRS_CH3 #4 ACMP0_O #31 ACMP1_O #31 GPIO_EM4WU1 silabs.com | Building a more connected world. Rev. 1.0 | 63 BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions 8.3 Alternate Functionality Overview A wide selection of alternate functionality is available for multiplexing to various pins. The following table shows the name of the alter-
nate functionality in the first column, followed by columns showing the possible LOCATION bitfield settings and the associated GPIO pin. Refer to 8.2 GPIO Functionality Table for a list of functions available on each GPIO pin. Note: Some functionality, such as analog interfaces, do not have alternate settings or a LOCATION bitfield. In these cases, the pinout is shown in the column corresponding to LOCATION 0. Alternate Functionality ACMP0_O ACMP1_O ADC0_EXTN ADC0_EXTP BOOT_RX BOOT_TX CMU_CLK0 CMU_CLK1 CMU_CLKI0 Table 8.3. Alternate Functionality Overview LOCATION 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 Description 4: PA4 5: PA5 6: PB11 4: PA4 5: PA5 6: PB11 8: PB13 11: PC6 8: PB13 11: PC6 12: PC7 13: PC8 14: PC9 15: PC10 12: PC7 13: PC8 14: PC9 15: PC10 16: PC11 16: PC11 21: PD13 22: PD14 23: PD15 21: PD13 22: PD14 23: PD15 24: PF0 25: PF1 26: PF2 27: PF3 24: PF0 25: PF1 26: PF2 27: PF3 28: PF4 29: PF5 30: PF6 31: PF7 28: PF4 29: PF5 30: PF6 31: PF7 5: PD14 6: PF2 7: PF7 5: PD15 6: PF3 7: PF6 4: PA5 0: PA0 1: PA1 2: PA2 3: PA3 0: PA0 1: PA1 2: PA2 3: PA3 0: PA0 0: PA1 0: PF1 0: PF0 0: PA1 2: PC6 3: PC11 0: PA0 2: PC7 3: PC10 0: PB13 1: PF7 2: PC6 Analog comparator ACMP0, digital out-
put. Analog comparator ACMP1, digital out-
put. Analog to digital converter ADC0 ex-
ternal reference in-
put negative pin. Analog to digital converter ADC0 ex-
ternal reference in-
put positive pin. Bootloader RX. Bootloader TX. Clock Management Unit, clock output number 0. Clock Management Unit, clock output number 1. Clock Management Unit, clock input number 0. silabs.com | Building a more connected world. Rev. 1.0 | 64 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 Description LOCATION BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions Debug-interface Serial Wire clock input and JTAG Test Clock. Note that this func-
tion is enabled to the pin out of reset, and has a built-in pull down. Debug-interface Serial Wire data in-
put / output and JTAG Test Mode Select. Note that this func-
tion is enabled to the pin out of reset, and has a built-in pull up. Debug-interface Serial Wire viewer Output. Note that this func-
tion is not enabled after reset, and must be enabled by software to be used. Debug-interface JTAG Test Data In. Note that this func-
tion becomes avail-
able after the first valid JTAG com-
mand is received, and has a built-in pull up when JTAG is active. Debug-interface JTAG Test Data Out. Note that this func-
tion becomes avail-
able after the first valid JTAG com-
mand is received. Embedded Trace Module ETM clock . Alternate Functionality DBG_SWCLKTCK DBG_SWDIOTMS DBG_SWO DBG_TDI DBG_TDO 0: PF0 0: PF1 0: PF2 1: PB13 2: PD15 3: PC11 0: PF3 0: PF2 ETM_TCLK 1: PA5 3: PC6 silabs.com | Building a more connected world. Rev. 1.0 | 65 Alternate Functionality ETM_TD0 ETM_TD1 ETM_TD2 ETM_TD3 FRC_DCLK FRC_DFRAME FRC_DOUT GPIO_EM4WU0 GPIO_EM4WU1 GPIO_EM4WU4 GPIO_EM4WU8 GPIO_EM4WU9 GPIO_EM4WU12 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 Description LOCATION BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions 4: PA4 5: PA5 6: PB11 4: PB11 6: PB13 4: PA5 5: PB11 7: PB13 8: PB13 11: PC6 9: PC6 10: PC7 11: PC8 10: PC6 11: PC7 12: PC7 13: PC8 14: PC9 15: PC10 12: PC9 13: PC10 14: PC11 12: PC8 13: PC9 14: PC10 15: PC11 16: PC11 19: PD13 21: PD13 22: PD14 23: PD15 20: PD14 21: PD15 22: PF0 23: PF1 20: PD13 21: PD14 22: PD15 23: PF0 24: PF0 25: PF1 26: PF2 27: PF3 24: PF2 25: PF3 26: PF4 27: PF5 24: PF1 25: PF2 26: PF3 27: PF4 28: PF4 29: PF5 30: PF6 31: PF7 28: PF6 29: PF7 30: PA0 31: PA1 28: PF5 29: PF6 30: PF7 31: PA0 3: PC7 3: PC8 3: PC9 3: PC10 0: PA0 1: PA1 2: PA2 3: PA3 0: PA2 1: PA3 2: PA4 3: PA5 0: PA1 1: PA2 2: PA3 3: PA4 0: PF2 0: PF7 0: PD14 0: PA3 0: PB13 0: PC10 Embedded Trace Module ETM data 0. Embedded Trace Module ETM data 1. Embedded Trace Module ETM data 2. Embedded Trace Module ETM data 3. Frame Controller, Data Sniffer Clock. Frame Controller, Data Sniffer Frame active Frame Controller, Data Sniffer Out-
put. Pin can be used to wake the system up from EM4 Pin can be used to wake the system up from EM4 Pin can be used to wake the system up from EM4 Pin can be used to wake the system up from EM4 Pin can be used to wake the system up from EM4 Pin can be used to wake the system up from EM4 silabs.com | Building a more connected world. Rev. 1.0 | 66 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 Description LOCATION BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions 0: PA1 1: PA2 2: PA3 3: PA4 0: PA0 1: PA1 2: PA2 3: PA3 4: PA5 5: PB11 7: PB13 4: PA4 5: PA5 6: PB11 12: PC8 13: PC9 14: PC10 15: PC11 12: PC7 13: PC8 14: PC9 15: PC10 10: PC6 11: PC7 8: PB13 11: PC6 20: PD13 21: PD14 22: PD15 23: PF0 21: PD13 22: PD14 23: PD15 24: PF1 25: PF2 26: PF3 27: PF4 24: PF0 25: PF1 26: PF2 27: PF3 28: PF5 29: PF6 30: PF7 31: PA0 28: PF4 29: PF5 30: PF6 31: PF7 20: PC11 16: PC11 18: PC10 19: PC11 19: PC10 0: PD13 0: PD14 0: PD15 0: PA0 0: PA1 0: PA2 0: PA3 0: PA4 0: PA5 I2C0 Serial Clock Line input / output. I2C0 Serial Data in-
put / output. I2C1 Serial Clock Line input / output. I2C1 Serial Data in-
put / output. LESENSE channel 5. LESENSE channel 6. LESENSE channel 7. LESENSE channel 8. LESENSE channel 9. LESENSE channel 10. LESENSE channel 11. LESENSE channel 12. LESENSE channel 13. Alternate Functionality I2C0_SCL I2C0_SDA I2C1_SCL I2C1_SDA LES_CH5 LES_CH6 LES_CH7 LES_CH8 LES_CH9 LES_CH10 LES_CH11 LES_CH12 LES_CH13 silabs.com | Building a more connected world. Rev. 1.0 | 67 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 Description LOCATION BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions Alternate Functionality LETIM0_OUT0 LETIM0_OUT1 LEU0_RX LEU0_TX MODEM_ANT0 MODEM_ANT1 MODEM_DCLK MODEM_DIN MODEM_DOUT OPA0_N OPA0_P OPA1_N OPA1_P 4: PA4 5: PA5 6: PB11 4: PA5 5: PB11 7: PB13 4: PA5 5: PB11 7: PB13 4: PA4 5: PA5 6: PB11 5: PB13 4: PB13 7: PC6 4: PA4 5: PA5 6: PB11 4: PA5 5: PB11 7: PB13 4: PB11 6: PB13 8: PB13 11: PC6 10: PC6 11: PC7 10: PC6 11: PC7 8: PB13 11: PC6 8: PC6 9: PC7 10: PC8 11: PC9 8: PC7 9: PC8 10: PC9 11: PC10 8: PB13 11: PC6 10: PC6 11: PC7 9: PC6 10: PC7 11: PC8 12: PC7 13: PC8 14: PC9 15: PC10 12: PC8 13: PC9 14: PC10 15: PC11 12: PC8 13: PC9 14: PC10 15: PC11 12: PC7 13: PC8 14: PC9 15: PC10 12: PC10 13: PC11 12: PC11 12: PC7 13: PC8 14: PC9 15: PC10 12: PC8 13: PC9 14: PC10 15: PC11 12: PC9 13: PC10 14: PC11 16: PC11 16: PC11 18: PD13 19: PD14 17: PD13 18: PD14 19: PD15 16: PC11 19: PD13 21: PD13 22: PD14 23: PD15 20: PD13 21: PD14 22: PD15 23: PF0 20: PD13 21: PD14 22: PD15 23: PF0 21: PD13 22: PD14 23: PD15 20: PD15 21: PF0 22: PF1 23: PF2 20: PF0 21: PF1 22: PF2 23: PF3 21: PD13 22: PD14 23: PD15 20: PD13 21: PD14 22: PD15 23: PF0 20: PD14 21: PD15 22: PF0 23: PF1 24: PF0 25: PF1 26: PF2 27: PF3 24: PF1 25: PF2 26: PF3 27: PF4 24: PF1 25: PF2 26: PF3 27: PF4 24: PF0 25: PF1 26: PF2 27: PF3 24: PF3 25: PF4 26: PF5 27: PF6 24: PF4 25: PF5 26: PF6 27: PF7 24: PF0 25: PF1 26: PF2 27: PF3 24: PF1 25: PF2 26: PF3 27: PF4 24: PF2 25: PF3 26: PF4 27: PF5 28: PF4 29: PF5 30: PF6 31: PF7 28: PF5 29: PF6 30: PF7 31: PA0 28: PF5 29: PF6 30: PF7 31: PA0 28: PF4 29: PF5 30: PF6 31: PF7 28: PF7 29: PA0 30: PA1 31: PA2 28: PA0 29: PA1 30: PA2 31: PA3 28: PF4 29: PF5 30: PF6 31: PF7 28: PF5 29: PF6 30: PF7 31: PA0 28: PF6 29: PF7 30: PA0 31: PA1 0: PA0 1: PA1 2: PA2 3: PA3 0: PA1 1: PA2 2: PA3 3: PA4 0: PA1 1: PA2 2: PA3 3: PA4 0: PA0 1: PA1 2: PA2 3: PA3 0: PA3 1: PA4 2: PA5 3: PB11 0: PA4 1: PA5 2: PB11 0: PA0 1: PA1 2: PA2 3: PA3 0: PA1 1: PA2 2: PA3 3: PA4 0: PA2 1: PA3 2: PA4 3: PA5 0: PA4 0: PA2 0: PD15 0: PD13 silabs.com | Building a more connected world. Low Energy Timer LETIM0, output channel 0. Low Energy Timer LETIM0, output channel 1. LEUART0 Receive input. LEUART0 Transmit output. Also used as receive input in half duplex commu-
nication. MODEM antenna control output 0, used for antenna diversity. MODEM antenna control output 1, used for antenna diversity. MODEM data clock out. MODEM data in. MODEM data out. Operational Amplifi-
er 0 external nega-
tive input. Operational Amplifi-
er 0 external posi-
tive input. Operational Amplifi-
er 1 external nega-
tive input. Operational Amplifi-
er 1 external posi-
tive input. Rev. 1.0 | 68 Alternate Functionality OPA2_N OPA2_P PCNT0_S0IN PCNT0_S1IN PRS_CH0 PRS_CH1 PRS_CH2 PRS_CH3 PRS_CH4 PRS_CH5 PRS_CH6 PRS_CH7 PRS_CH8 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 Description LOCATION BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions 0: PB13 0: PB11 0: PA0 1: PA1 2: PA2 3: PA3 0: PA1 1: PA2 2: PA3 3: PA4 0: PF0 1: PF1 2: PF2 3: PF3 0: PF1 1: PF2 2: PF3 3: PF4 0: PF2 1: PF3 2: PF4 3: PF5 0: PF3 1: PF4 2: PF5 3: PF6 3: PD13 0: PA0 1: PA1 2: PA2 3: PA3 0: PA1 1: PA2 2: PA3 3: PA4 0: PA2 1: PA3 2: PA4 3: PA5 4: PA4 5: PA5 6: PB11 4: PA5 5: PB11 7: PB13 4: PF4 5: PF5 6: PF6 7: PF7 4: PF5 5: PF6 6: PF7 7: PF0 4: PF6 5: PF7 6: PF0 7: PF1 4: PF7 5: PF0 6: PF1 7: PF2 4: PD13 5: PD14 6: PD15 4: PD14 5: PD15 4: PA4 5: PA5 6: PB11 4: PA5 5: PB11 7: PB13 4: PB11 6: PB13 16: PC11 21: PD13 22: PD14 23: PD15 20: PD13 21: PD14 22: PD15 23: PF0 24: PF0 25: PF1 26: PF2 27: PF3 24: PF1 25: PF2 26: PF3 27: PF4 28: PF4 29: PF5 30: PF6 31: PF7 28: PF5 29: PF6 30: PF7 31: PA0 12: PC7 13: PC8 14: PC9 15: PC10 12: PC8 13: PC9 14: PC10 15: PC11 12: PC10 13: PC11 8: PB13 11: PC6 10: PC6 11: PC7 8: PC6 9: PC7 10: PC8 11: PC9 12: PD13 13: PD14 14: PD15 8: PB13 16: PD14 17: PD15 15: PD13 10: PA0 9: PA0 10: PA1 Operational Amplifi-
er 2 external nega-
tive input. Operational Amplifi-
er 2 external posi-
tive input. Pulse Counter PCNT0 input num-
ber 0. Pulse Counter PCNT0 input num-
ber 1. Peripheral Reflex System PRS, chan-
nel 0. Peripheral Reflex System PRS, chan-
nel 1. Peripheral Reflex System PRS, chan-
nel 2. Peripheral Reflex System PRS, chan-
nel 3. Peripheral Reflex System PRS, chan-
nel 4. Peripheral Reflex System PRS, chan-
nel 5. Peripheral Reflex System PRS, chan-
nel 6. Peripheral Reflex System PRS, chan-
nel 7. Peripheral Reflex System PRS, chan-
nel 8. silabs.com | Building a more connected world. Rev. 1.0 | 69 Alternate Functionality PRS_CH9 PRS_CH10 PRS_CH11 TIM0_CC0 TIM0_CC1 TIM0_CC2 TIM0_CDTI0 TIM0_CDTI1 TIM0_CDTI2 TIM1_CC0 TIM1_CC1 TIM1_CC2 TIM1_CC3 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 Description LOCATION BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions 0: PA3 1: PA4 2: PA5 3: PB11 0: PC6 1: PC7 2: PC8 3: PC9 0: PC7 1: PC8 2: PC9 3: PC10 0: PA0 1: PA1 2: PA2 3: PA3 0: PA1 1: PA2 2: PA3 3: PA4 0: PA2 1: PA3 2: PA4 3: PA5 0: PA3 1: PA4 2: PA5 3: PB11 0: PA4 1: PA5 2: PB11 0: PA5 1: PB11 3: PB13 0: PA0 1: PA1 2: PA2 3: PA3 0: PA1 1: PA2 2: PA3 3: PA4 0: PA2 1: PA3 2: PA4 3: PA5 0: PA3 1: PA4 2: PA5 3: PB11 5: PB13 4: PC10 5: PC11 4: PC11 5: PC6 4: PA4 5: PA5 6: PB11 4: PA5 5: PB11 7: PB13 4: PB11 6: PB13 5: PB13 4: PB13 7: PC6 6: PC6 7: PC7 4: PA4 5: PA5 6: PB11 4: PA5 5: PB11 7: PB13 4: PB11 6: PB13 5: PB13 16: PC11 8: PA0 9: PA1 10: PA2 11: PC6 12: PC7 13: PC8 14: PC9 15: PC10 8: PB13 11: PC6 10: PC6 11: PC7 9: PC6 10: PC7 11: PC8 8: PC6 9: PC7 10: PC8 11: PC9 8: PC7 9: PC8 10: PC9 11: PC10 8: PC8 9: PC9 10: PC10 11: PC11 8: PB13 11: PC6 10: PC6 11: PC7 9: PC6 10: PC7 11: PC8 8: PC6 9: PC7 10: PC8 11: PC9 12: PC7 13: PC8 14: PC9 15: PC10 12: PC8 13: PC9 14: PC10 15: PC11 12: PC9 13: PC10 14: PC11 12: PC10 13: PC11 12: PC11 12: PC7 13: PC8 14: PC9 15: PC10 12: PC8 13: PC9 14: PC10 15: PC11 12: PC9 13: PC10 14: PC11 12: PC10 13: PC11 16: PC11 19: PD13 18: PD13 19: PD14 17: PD13 18: PD14 19: PD15 16: PD13 17: PD14 18: PD15 19: PF0 16: PC11 19: PD13 18: PD13 19: PD14 21: PD13 22: PD14 23: PD15 20: PD13 21: PD14 22: PD15 23: PF0 20: PD14 21: PD15 22: PF0 23: PF1 20: PD15 21: PF0 22: PF1 23: PF2 20: PF0 21: PF1 22: PF2 23: PF3 20: PF1 21: PF2 22: PF3 23: PF4 21: PD13 22: PD14 23: PD15 20: PD13 21: PD14 22: PD15 23: PF0 20: PD14 21: PD15 22: PF0 23: PF1 20: PD15 21: PF0 22: PF1 23: PF2 24: PF0 25: PF1 26: PF2 27: PF3 24: PF1 25: PF2 26: PF3 27: PF4 24: PF2 25: PF3 26: PF4 27: PF5 24: PF3 25: PF4 26: PF5 27: PF6 24: PF4 25: PF5 26: PF6 27: PF7 24: PF5 25: PF6 26: PF7 27: PA0 24: PF0 25: PF1 26: PF2 27: PF3 24: PF1 25: PF2 26: PF3 27: PF4 24: PF2 25: PF3 26: PF4 27: PF5 24: PF3 25: PF4 26: PF5 27: PF6 28: PF4 29: PF5 30: PF6 31: PF7 28: PF5 29: PF6 30: PF7 31: PA0 28: PF6 29: PF7 30: PA0 31: PA1 28: PF7 29: PA0 30: PA1 31: PA2 28: PA0 29: PA1 30: PA2 31: PA3 28: PA1 29: PA2 30: PA3 31: PA4 28: PF4 29: PF5 30: PF6 31: PF7 28: PF5 29: PF6 30: PF7 31: PA0 28: PF6 29: PF7 30: PA0 31: PA1 28: PF7 29: PA0 30: PA1 31: PA2 Peripheral Reflex System PRS, chan-
nel 9. Peripheral Reflex System PRS, chan-
nel 10. Peripheral Reflex System PRS, chan-
nel 11. Timer 0 Capture Compare input /
output channel 0. Timer 0 Capture Compare input /
output channel 1. Timer 0 Capture Compare input /
output channel 2. Timer 0 Compli-
mentary Dead Time Insertion channel 0. Timer 0 Compli-
mentary Dead Time Insertion channel 1. Timer 0 Compli-
mentary Dead Time Insertion channel 2. Timer 1 Capture Compare input /
output channel 0. Timer 1 Capture Compare input /
output channel 1. Timer 1 Capture Compare input /
output channel 2. Timer 1 Capture Compare input /
output channel 3. silabs.com | Building a more connected world. Rev. 1.0 | 70 Alternate Functionality US0_CLK US0_CS US0_CTS US0_RTS US0_RX US0_TX US1_CLK US1_CS US1_CTS US1_RTS 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 Description LOCATION BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions 0: PA2 1: PA3 2: PA4 3: PA5 0: PA3 1: PA4 2: PA5 3: PB11 0: PA4 1: PA5 2: PB11 0: PA5 1: PB11 3: PB13 0: PA1 1: PA2 2: PA3 3: PA4 4: PB11 6: PB13 5: PB13 4: PB13 7: PC6 6: PC6 7: PC7 4: PA5 5: PB11 7: PB13 9: PC6 10: PC7 11: PC8 8: PC6 9: PC7 10: PC8 11: PC9 8: PC7 9: PC8 10: PC9 11: PC10 8: PC8 9: PC9 10: PC10 11: PC11 10: PC6 11: PC7 12: PC9 13: PC10 14: PC11 12: PC10 13: PC11 12: PC11 12: PC8 13: PC9 14: PC10 15: PC11 19: PD13 18: PD13 19: PD14 17: PD13 18: PD14 19: PD15 16: PD13 17: PD14 18: PD15 19: PF0 20: PD14 21: PD15 22: PF0 23: PF1 20: PD15 21: PF0 22: PF1 23: PF2 20: PF0 21: PF1 22: PF2 23: PF3 20: PF1 21: PF2 22: PF3 23: PF4 20: PD13 21: PD14 22: PD15 23: PF0 24: PF2 25: PF3 26: PF4 27: PF5 24: PF3 25: PF4 26: PF5 27: PF6 24: PF4 25: PF5 26: PF6 27: PF7 24: PF5 25: PF6 26: PF7 27: PA0 24: PF1 25: PF2 26: PF3 27: PF4 28: PF6 29: PF7 30: PA0 31: PA1 28: PF7 29: PA0 30: PA1 31: PA2 28: PA0 29: PA1 30: PA2 31: PA3 28: PA1 29: PA2 30: PA3 31: PA4 28: PF5 29: PF6 30: PF7 31: PA0 0: PA0 1: PA1 2: PA2 3: PA3 4: PA4 5: PA5 6: PB11 8: PB13 11: PC6 12: PC7 13: PC8 14: PC9 15: PC10 16: PC11 21: PD13 22: PD14 23: PD15 24: PF0 25: PF1 26: PF2 27: PF3 28: PF4 29: PF5 30: PF6 31: PF7 12: PC9 13: PC10 14: PC11 12: PC10 13: PC11 12: PC11 0: PA2 1: PA3 2: PA4 3: PA5 0: PA3 1: PA4 2: PA5 3: PB11 0: PA4 1: PA5 2: PB11 0: PA5 1: PB11 3: PB13 4: PB11 6: PB13 5: PB13 4: PB13 7: PC6 6: PC6 7: PC7 9: PC6 10: PC7 11: PC8 8: PC6 9: PC7 10: PC8 11: PC9 8: PC7 9: PC8 10: PC9 11: PC10 8: PC8 9: PC9 10: PC10 11: PC11 20: PD14 21: PD15 22: PF0 23: PF1 20: PD15 21: PF0 22: PF1 23: PF2 20: PF0 21: PF1 22: PF2 23: PF3 20: PF1 21: PF2 22: PF3 23: PF4 24: PF2 25: PF3 26: PF4 27: PF5 24: PF3 25: PF4 26: PF5 27: PF6 24: PF4 25: PF5 26: PF6 27: PF7 24: PF5 25: PF6 26: PF7 27: PA0 28: PF6 29: PF7 30: PA0 31: PA1 28: PF7 29: PA0 30: PA1 31: PA2 28: PA0 29: PA1 30: PA2 31: PA3 28: PA1 29: PA2 30: PA3 31: PA4 19: PD13 18: PD13 19: PD14 17: PD13 18: PD14 19: PD15 16: PD13 17: PD14 18: PD15 19: PF0 USART0 clock in-
put / output. USART0 chip se-
lect input / output. USART0 Clear To Send hardware flow control input. USART0 Request To Send hardware flow control output. USART0 Asynchro-
nous Receive. USART0 Synchro-
nous mode Master Input / Slave Out-
put (MISO). USART0 Asynchro-
nous Transmit. Al-
so used as receive input in half duplex communication. USART0 Synchro-
nous mode Master Output / Slave In-
put (MOSI). USART1 clock in-
put / output. USART1 chip se-
lect input / output. USART1 Clear To Send hardware flow control input. USART1 Request To Send hardware flow control output. silabs.com | Building a more connected world. Rev. 1.0 | 71 Alternate Functionality US1_RX US1_TX US2_CLK US2_CS US2_CTS US2_RTS US2_RX US2_TX 0: PA5 0: PA1 VDAC0_EXT 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 Description LOCATION BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions 0: PA1 1: PA2 2: PA3 3: PA4 4: PA5 5: PB11 7: PB13 12: PC8 13: PC9 14: PC10 15: PC11 10: PC6 11: PC7 20: PD13 21: PD14 22: PD15 23: PF0 24: PF1 25: PF2 26: PF3 27: PF4 28: PF5 29: PF6 30: PF7 31: PA0 0: PA0 1: PA1 2: PA2 3: PA3 4: PA4 5: PA5 6: PB11 8: PB13 11: PC6 12: PC7 13: PC8 14: PC9 15: PC10 16: PC11 21: PD13 22: PD14 23: PD15 24: PF0 25: PF1 26: PF2 27: PF3 28: PF4 29: PF5 30: PF6 31: PF7 USART1 Asynchro-
nous Receive. USART1 Synchro-
nous mode Master Input / Slave Out-
put (MISO). USART1 Asynchro-
nous Transmit. Al-
so used as receive input in half duplex communication. USART1 Synchro-
nous mode Master Output / Slave In-
put (MOSI). 11: PF0 10: PF0 11: PF1 9: PF0 10: PF1 11: PF3 12: PF0 13: PF1 14: PF3 15: PF4 12: PF1 13: PF3 14: PF4 15: PF5 12: PF3 13: PF4 14: PF5 15: PF6 12: PF4 13: PF5 14: PF6 15: PF7 13: PF0 14: PF1 15: PF3 14: PF0 15: PF1 16: PF5 17: PF6 18: PF7 16: PF6 17: PF7 16: PF7 16: PF4 17: PF5 18: PF6 19: PF7 16: PF3 17: PF4 18: PF5 19: PF6 30: PA5 USART2 clock in-
put / output. 29: PA5 USART2 chip se-
lect input / output. 28: PA5 31: PA5 27: PA5 20: PF7 USART2 Clear To Send hardware flow control input. USART2 Request To Send hardware flow control output. USART2 Asynchro-
nous Receive. USART2 Synchro-
nous mode Master Input / Slave Out-
put (MISO). USART2 Asynchro-
nous Transmit. Al-
so used as receive input in half duplex communication. USART2 Synchro-
nous mode Master Output / Slave In-
put (MOSI). Digital to analog converter VDAC0 external reference input pin. silabs.com | Building a more connected world. Rev. 1.0 | 72 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 Description LOCATION BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions Digital to Analog Converter DAC0 output channel number 0. Digital to Analog Converter DAC0 al-
ternative output for channel 0. Digital to Analog Converter DAC0 output channel number 1. Digital to Analog Converter DAC0 al-
ternative output for channel 1. Wide timer 0 Cap-
ture Compare in-
put / output channel 0. Wide timer 0 Cap-
ture Compare in-
put / output channel 1. Wide timer 0 Cap-
ture Compare in-
put / output channel 2. Wide timer 0 Com-
plimentary Dead Time Insertion channel 0. Wide timer 0 Com-
plimentary Dead Time Insertion channel 1. Wide timer 0 Com-
plimentary Dead Time Insertion channel 2. 4: PA4 5: PA5 17: PB13 15: PB11 13: PB11 15: PB13 13: PB13 11: PB11 9: PB13 7: PB11 5: PB11 7: PB13 5: PB13 18: PC6 19: PC7 16: PC6 17: PC7 18: PC8 19: PC9 16: PC8 17: PC9 18: PC10 19: PC11 14: PC6 15: PC7 28: PC8 29: PC9 30: PC10 31: PC11 28: PC10 29: PC11 29: PD13 30: PD14 31: PD15 28: PD14 29: PD15 30: PF0 31: PF1 28: PF0 29: PF1 30: PF2 31: PF3 26: PC6 27: PC7 24: PC6 25: PC7 26: PC8 27: PC9 24: PC8 25: PC9 26: PC10 27: PC11 27: PD13 25: PD13 26: PD14 27: PD15 22: PC6 23: PC7 20: PC8 21: PC9 22: PC10 23: PC11 20: PC10 21: PC11 0: PA3 0: PA5 1: PD13 2: PD15 0: PD14 1: PA2 2: PA4 0: PA0 1: PA1 2: PA2 3: PA3 0: PA2 1: PA3 2: PA4 3: PA5 0: PA4 1: PA5 Alternate Functionality VDAC0_OUT0 /
OPA0_OUT VDAC0_OUT0AL T / OPA0_OUT-
ALT VDAC0_OUT1 /
OPA1_OUT VDAC0_OUT1AL T / OPA1_OUT-
ALT WTIM0_CC0 WTIM0_CC1 WTIM0_CC2 WTIM0_CDTI0 WTIM0_CDTI1 WTIM0_CDTI2 3: PB11 silabs.com | Building a more connected world. Rev. 1.0 | 73 8.4 Analog Port (APORT) Client Maps The Analog Port (APORT) is an infrastructure used to connect chip pins with on-chip analog clients such as analog comparators, ADCs, DACs, etc. The APORT consists of a set of shared buses, switches, and control logic needed to configurably implement the signal rout-
ing. Figure 8.2 APORT Connection Diagram on page 74 shows the APORT routing for this device family (note that available features may vary by part number). A complete description of APORT functionality can be found in the Reference Manual. BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions PF0 PF1 PF2 PF3 PF4 PF5 PF6 PF7 X A Y A X B Y B P C 1 1 P C 1 0 P C 9 P C 8 P C 7 P C 6 ACMP0 ADC0 POS NEG POS NEG EXTP EXTN POS NEG OPA0 OUT POS NEG OPA2 OUT 1X 2X 3X 4X NEXT1 NEXT0 1Y 2Y 3Y 4Y NEXT1 NEXT0 1X 2X 3X 4X NEXT0 NEXT2 1Y 2Y 3Y 4Y NEXT1 OPA0_P 1X 1X 2X 3X 4X OPA0_N 1Y 2Y 3Y 4Y OUT0 OUT0ALT OUT1 OUT2 OUT3 OUT4 NEXT0 OPA2_P 1X 1X 2X 3X 4X OPA2_N 1Y 2Y 3Y 4Y OUT2 OUT2ALT OUT1 OUT2 OUT3 OUT4 NEXT2 CEXT CSEN CEXT_SENSE 1X 1Y 3X 3Y 2X 2Y 4X 4Y nX, nY APORTnX, APORTnY AX, BY, BUSAX, BUSBY, ... Y D X D Y C X C PB15 PB14 PB13 PB12 PB11 PA5 PA4 PA3 PA2 PA1 PA0 PD15 VDAC0_OUT0ALT VDAC0_OUT1ALT VDAC0_OUT1ALT VDAC0_OUT0ALT 1X 2X 3X 4X NEXT1 NEXT0 1Y 2Y 3Y 4Y NEXT1 NEXT0 POS NEG ACMP1 OPA1_P 1X 1X 2X 3X 4X OPA1_N 1Y 2Y 3Y 4Y OUT1 OUT1ALT OUT1 OUT2 OUT3 OUT4 NEXT1 POS NEG OPA1 OUT OPA2_N OUT2 OPA2_P IDAC0 1X 1Y OUT0ALT OPA0_N OUT1ALT OUT0 OPA0_P OUT1ALT ADC_EXTP ADC_EXTN OPA1_N OUT0ALT O U T 1 A L T O U T 0 A L T O P A 1 _ P O U T 1 V D A C 0 _ O U T 0 A L T V D A C 0 _ O U T 0 A L T P D 9 P D 1 0 P D 1 1 P D 1 2 P D 1 3 P D 1 4 Figure 8.2. APORT Connection Diagram Client maps for each analog circuit using the APORT are shown in the following tables. The maps are organized by bus, and show the peripheral's port connection, the shared bus, and the connection from specific bus channel numbers to GPIO pins. silabs.com | Building a more connected world. Rev. 1.0 | 74 In general, enumerations for the pin selection field in an analog peripheral's register can be determined by finding the desired pin con-
nection in the table and then combining the value in the Port column (APORT__), and the channel identifier (CH__). For example, if pin PF7 is available on port APORT2X as CH23, the register field enumeration to connect to PF7 would be APORT2XCH23. The shared bus used by this connection is indicated in the Bus column. BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions Table 8.4. ACMP0 Bus and Pin Mapping t r o P s u B 1 3 H C 0 3 H C 9 2 H C 8 2 H C 7 2 H C 6 2 H C 5 2 H C 4 2 H C 3 2 H C 2 2 H C 1 2 H C 0 2 H C 9 1 H C 8 1 H C 7 1 H C 6 1 H C 5 1 H C 4 1 H C 3 1 H C 2 1 H C 1 1 H C 0 1 H C 9 H C 8 H C 7 H C 6 H C 5 H C 4 H C 3 H C 2 H C 1 H C 0 H C X 1 T R O P A Y 1 T R O P A X 2 T R O P A Y 2 T R O P A X 3 T R O P A Y 3 T R O P A X 4 T R O P A Y 4 T R O P A X A S U B Y A S U B X B S U B Y B S U B X C S U B Y C S U B X D S U B Y D S U B 4 1 B P 2 1 B P 5 1 B P 5 1 B P 3 1 B P 3 1 B P 1 1 B P 1 1 B P 4 1 B P 2 1 B P 6 F P 4 F P 2 F P 0 F P 0 1 C P 8 C P 6 C P 7 F P 5 F P 3 F P 1 F P 7 F P 5 F P 3 F P 1 F P 1 1 C P 1 1 C P 9 C P 7 C P 9 C P 7 C P 6 F P 4 F P 2 F P 0 F P 0 1 C P 8 C P 6 C P 4 A P 2 A P 0 A P 4 1 D P 2 1 D P 0 1 D P 5 A P 3 A P 1 A P 5 A P 3 A P 1 A P 5 1 D P 5 1 D P 3 1 D P 3 1 D P 1 1 D P 1 1 D P 9 D P 9 D P 4 A P 2 A P 0 A P 4 1 D P 2 1 D P 0 1 D P silabs.com | Building a more connected world. Rev. 1.0 | 75 BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions Table 8.5. ACMP1 Bus and Pin Mapping t r o P s u B 1 3 H C 0 3 H C 9 2 H C 8 2 H C 7 2 H C 6 2 H C 5 2 H C 4 2 H C 3 2 H C 2 2 H C 1 2 H C 0 2 H C 9 1 H C 8 1 H C 7 1 H C 6 1 H C 5 1 H C 4 1 H C 3 1 H C 2 1 H C 1 1 H C 0 1 H C 9 H C 8 H C 7 H C 6 H C 5 H C 4 H C 3 H C 2 H C 1 H C 0 H C X 1 T R O P A Y 1 T R O P A X 2 T R O P A Y 2 T R O P A X 3 T R O P A Y 3 T R O P A X 4 T R O P A Y 4 T R O P A X A S U B Y A S U B X B S U B Y B S U B X C S U B Y C S U B X D S U B Y D S U B 4 1 B P 2 1 B P 5 1 B P 5 1 B P 3 1 B P 3 1 B P 1 1 B P 1 1 B P 4 1 B P 2 1 B P 6 F P 4 F P 2 F P 0 F P 0 1 C P 8 C P 6 C P 7 F P 5 F P 3 F P 1 F P 7 F P 5 F P 3 F P 1 F P 1 1 C P 1 1 C P 9 C P 7 C P 9 C P 7 C P 6 F P 4 F P 2 F P 0 F P 0 1 C P 8 C P 6 C P 4 A P 2 A P 0 A P 4 1 D P 2 1 D P 0 1 D P 5 A P 3 A P 1 A P 5 A P 3 A P 1 A P 5 1 D P 5 1 D P 3 1 D P 3 1 D P 1 1 D P 1 1 D P 9 D P 9 D P 4 A P 2 A P 0 A P 4 1 D P 2 1 D P 0 1 D P silabs.com | Building a more connected world. Rev. 1.0 | 76 BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions Table 8.6. ADC0 Bus and Pin Mapping t r o P s u B 1 3 H C 0 3 H C 9 2 H C 8 2 H C 7 2 H C 6 2 H C 5 2 H C 4 2 H C 3 2 H C 2 2 H C 1 2 H C 0 2 H C 9 1 H C 8 1 H C 7 1 H C 6 1 H C 5 1 H C 4 1 H C 3 1 H C 2 1 H C 1 1 H C 0 1 H C 9 H C 8 H C 7 H C 6 H C 5 H C 4 H C 3 H C 2 H C 1 H C 0 H C X 1 T R O P A Y 1 T R O P A X 2 T R O P A Y 2 T R O P A X 3 T R O P A Y 3 T R O P A X 4 T R O P A Y 4 T R O P A X A S U B Y A S U B X B S U B Y B S U B X C S U B Y C S U B X D S U B Y D S U B 4 1 B P 2 1 B P 5 1 B P 5 1 B P 3 1 B P 3 1 B P 1 1 B P 1 1 B P 4 1 B P 2 1 B P 6 F P 4 F P 2 F P 0 F P 0 1 C P 8 C P 6 C P 7 F P 5 F P 3 F P 1 F P 7 F P 5 F P 3 F P 1 F P 1 1 C P 1 1 C P 9 C P 7 C P 9 C P 7 C P 6 F P 4 F P 2 F P 0 F P 0 1 C P 8 C P 6 C P 4 A P 2 A P 0 A P 4 1 D P 2 1 D P 0 1 D P 5 A P 3 A P 1 A P 5 A P 3 A P 1 A P 5 1 D P 5 1 D P 3 1 D P 3 1 D P 1 1 D P 1 1 D P 9 D P 9 D P 4 A P 2 A P 0 A P 4 1 D P 2 1 D P 0 1 D P silabs.com | Building a more connected world. Rev. 1.0 | 77 BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions Table 8.7. CSEN Bus and Pin Mapping 1 3 H C 0 3 H C 9 2 H C 8 2 H C 7 2 H C 6 2 H C 5 2 H C 4 2 H C 3 2 H C 2 2 H C 1 2 H C 0 2 H C 9 1 H C 8 1 H C 7 1 H C 6 1 H C 5 1 H C 4 1 H C 3 1 H C 2 1 H C 1 1 H C 0 1 H C 9 H C 8 H C 7 H C 6 H C 5 H C 4 H C 3 H C 2 H C 1 H C 0 H C 6 F P 4 F P 2 F P 0 F P 0 1 C P 8 C P 6 C P 7 F P 5 F P 3 F P 1 F P 1 1 C P 9 C P 7 C P 4 1 B P 2 1 B P 5 1 B P 3 1 B P 1 1 B P 4 A P 2 A P 0 A P 4 1 D P 2 1 D P 0 1 D P 5 A P 3 A P 1 A P 5 1 D P 3 1 D P 1 1 D P 9 D P t r o P s u B CEXT X 1 T R O P A Y 1 T R O P A X 3 T R O P A Y 3 T R O P A X A S U B Y A S U B X C S U B Y C S U B CEXT_SENSE X 2 T R O P A Y 2 T R O P A X 4 T R O P A Y 4 T R O P A X B S U B Y B S U B X D S U B Y D S U B 5 1 B P 3 1 B P 1 1 B P 4 1 B P 2 1 B P 7 F P 5 F P 3 F P 1 F P 1 1 C P 9 C P 7 C P 6 F P 4 F P 2 F P 0 F P 0 1 C P 8 C P 6 C P 5 A P 3 A P 1 A P 5 1 D P 3 1 D P 1 1 D P 9 D P 4 A P 2 A P 0 A P 4 1 D P 2 1 D P 0 1 D P Table 8.8. IDAC0 Bus and Pin Mapping t r o P s u B 1 3 H C 0 3 H C 9 2 H C 8 2 H C 7 2 H C 6 2 H C 5 2 H C 4 2 H C 3 2 H C 2 2 H C 1 2 H C 0 2 H C 9 1 H C 8 1 H C 7 1 H C 6 1 H C 5 1 H C 4 1 H C 3 1 H C 2 1 H C 1 1 H C 0 1 H C 9 H C 8 H C 7 H C 6 H C 5 H C 4 H C 3 H C 2 H C 1 H C 0 H C X 1 T R O P A Y 1 T R O P A X C S U B Y C S U B 4 1 B P 2 1 B P 5 1 B P 3 1 B P 1 1 B P 4 A P 2 A P 0 A P 4 1 D P 2 1 D P 0 1 D P 5 A P 3 A P 1 A P 5 1 D P 3 1 D P 1 1 D P 9 D P silabs.com | Building a more connected world. Rev. 1.0 | 78 BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions Table 8.9. VDAC0 / OPA Bus and Pin Mapping 0 3 H C 9 2 H C 8 2 H C 7 2 H C 6 2 H C 5 2 H C 4 2 H C 3 2 H C 2 2 H C 1 2 H C 0 2 H C 9 1 H C 8 1 H C 7 1 H C 6 1 H C 5 1 H C 4 1 H C 3 1 H C 2 1 H C 1 1 H C 0 1 H C 9 H C 8 H C 7 H C 6 H C 5 H C 4 H C 3 H C 2 H C 1 H C 0 H C t r o P s u B 1 3 H C OPA0_N Y 1 T R O P A Y 2 T R O P A Y 3 T R O P A Y 4 T R O P A Y A S U B Y B S U B Y C S U B Y D S U B 5 1 B P 3 1 B P 1 1 B P 4 1 B P 2 1 B P OPA0_P X 1 T R O P A X 2 T R O P A X 3 T R O P A X 4 T R O P A X A S U B X B S U B X C S U B X D S U B 4 1 B P 2 1 B P 5 1 B P 3 1 B P 1 1 B P 7 F P 5 F P 3 F P 1 F P 1 1 C P 9 C P 7 C P 6 F P 4 F P 2 F P 0 F P 0 1 C P 8 C P 6 C P 5 A P 3 A P 1 A P 5 1 D P 3 1 D P 1 1 D P 9 D P 4 A P 2 A P 0 A P 4 1 D P 2 1 D P 0 1 D P 6 F P 4 F P 2 F P 0 F P 0 1 C P 8 C P 6 C P 7 F P 5 F P 3 F P 1 F P 1 1 C P 9 C P 7 C P 4 A P 2 A P 0 A P 4 1 D P 2 1 D P 0 1 D P 5 A P 3 A P 1 A P 5 1 D P 3 1 D P 1 1 D P 9 D P silabs.com | Building a more connected world. Rev. 1.0 | 79 0 3 H C 9 2 H C 8 2 H C 7 2 H C 6 2 H C 5 2 H C 4 2 H C 3 2 H C 2 2 H C 1 2 H C 0 2 H C 9 1 H C 8 1 H C 7 1 H C 6 1 H C 5 1 H C 4 1 H C 3 1 H C 2 1 H C 1 1 H C 0 1 H C 9 H C 8 H C 7 H C 6 H C 5 H C 4 H C 3 H C 2 H C 1 H C 0 H C BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions t r o P s u B 1 3 H C OPA1_N Y 1 T R O P A Y 2 T R O P A Y 3 T R O P A Y 4 T R O P A Y A S U B Y B S U B Y C S U B Y D S U B 5 1 B P 3 1 B P 1 1 B P 4 1 B P 2 1 B P OPA1_P X 1 T R O P A X 2 T R O P A X 3 T R O P A X 4 T R O P A X A S U B X B S U B X C S U B X D S U B 4 1 B P 2 1 B P 5 1 B P 3 1 B P 1 1 B P OPA2_N Y 1 T R O P A Y 2 T R O P A Y 3 T R O P A Y 4 T R O P A Y A S U B Y B S U B Y C S U B Y D S U B 5 1 B P 3 1 B P 1 1 B P 4 1 B P 2 1 B P 7 F P 5 F P 3 F P 1 F P 1 1 C P 9 C P 7 C P 6 F P 4 F P 2 F P 0 F P 0 1 C P 8 C P 6 C P 5 A P 3 A P 1 A P 5 1 D P 3 1 D P 1 1 D P 9 D P 4 A P 2 A P 0 A P 4 1 D P 2 1 D P 0 1 D P 6 F P 4 F P 2 F P 0 F P 0 1 C P 8 C P 6 C P 7 F P 5 F P 3 F P 1 F P 1 1 C P 9 C P 7 C P 4 A P 2 A P 0 A P 4 1 D P 2 1 D P 0 1 D P 5 A P 3 A P 1 A P 5 1 D P 3 1 D P 1 1 D P 9 D P 7 F P 5 F P 3 F P 1 F P 1 1 C P 9 C P 7 C P 6 F P 4 F P 2 F P 0 F P 0 1 C P 8 C P 6 C P 5 A P 3 A P 1 A P 5 1 D P 3 1 D P 1 1 D P 9 D P 4 A P 2 A P 0 A P 4 1 D P 2 1 D P 0 1 D P silabs.com | Building a more connected world. Rev. 1.0 | 80 t r o P s u B 1 3 H C 0 3 H C 9 2 H C 8 2 H C 7 2 H C 6 2 H C 5 2 H C 4 2 H C 3 2 H C 2 2 H C 1 2 H C 0 2 H C 9 1 H C 8 1 H C 7 1 H C 6 1 H C 5 1 H C 4 1 H C 3 1 H C 2 1 H C 1 1 H C 0 1 H C 9 H C 8 H C 7 H C 6 H C 5 H C 4 H C 3 H C 2 H C 1 H C 0 H C OPA2_OUT BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions Y 1 T R O P A Y 2 T R O P A Y 3 T R O P A Y 4 T R O P A Y A S U B Y B S U B Y C S U B Y D S U B 5 1 B P 3 1 B P 1 1 B P 4 1 B P 2 1 B P OPA2_P X 1 T R O P A X 2 T R O P A X 3 T R O P A X 4 T R O P A X A S U B X B S U B X C S U B X D S U B 4 1 B P 2 1 B P 5 1 B P 3 1 B P 1 1 B P VDAC0_OUT0 / OPA0_OUT Y 1 T R O P A Y 2 T R O P A Y 3 T R O P A Y 4 T R O P A Y A S U B Y B S U B Y C S U B Y D S U B 5 1 B P 3 1 B P 1 1 B P 4 1 B P 2 1 B P 7 F P 5 F P 3 F P 1 F P 1 1 C P 9 C P 7 C P 6 F P 4 F P 2 F P 0 F P 0 1 C P 8 C P 6 C P 5 A P 3 A P 1 A P 5 1 D P 3 1 D P 1 1 D P 9 D P 4 A P 2 A P 0 A P 4 1 D P 2 1 D P 0 1 D P 6 F P 4 F P 2 F P 0 F P 0 1 C P 8 C P 6 C P 7 F P 5 F P 3 F P 1 F P 1 1 C P 9 C P 7 C P 4 A P 2 A P 0 A P 4 1 D P 2 1 D P 0 1 D P 5 A P 3 A P 1 A P 5 1 D P 3 1 D P 1 1 D P 9 D P 7 F P 5 F P 3 F P 1 F P 1 1 C P 9 C P 7 C P 6 F P 4 F P 2 F P 0 F P 0 1 C P 8 C P 6 C P 5 A P 3 A P 1 A P 5 1 D P 3 1 D P 1 1 D P 9 D P 4 A P 2 A P 0 A P 4 1 D P 2 1 D P 0 1 D P silabs.com | Building a more connected world. Rev. 1.0 | 81 BGM13P Blue Gecko Bluetooth Module Data Sheet Pin Definitions 5 2 H C 4 2 H C 3 2 H C 2 2 H C 1 2 H C 0 2 H C 9 1 H C 8 1 H C 7 1 H C 6 1 H C 5 1 H C 4 1 H C 3 1 H C 2 1 H C 1 1 H C 0 1 H C 9 H C 8 H C 7 H C 6 H C 5 H C 4 H C 3 H C 2 H C 1 H C 0 H C 7 F P 5 F P 3 F P 1 F P 1 1 C P 9 C P 7 C P 6 F P 4 F P 2 F P 0 F P 0 1 C P 8 C P 6 C P 5 A P 3 A P 1 A P 5 1 D P 3 1 D P 1 1 D P 9 D P 4 A P 2 A P 0 A P 4 1 D P 2 1 D P 0 1 D P t r o P s u B 0 3 H C 1 3 H C 6 2 H C VDAC0_OUT1 / OPA1_OUT 9 2 H C 8 2 H C 7 2 H C Y 1 T R O P A Y 2 T R O P A Y 3 T R O P A Y 4 T R O P A Y A S U B Y B S U B Y C S U B Y D S U B 5 1 B P 3 1 B P 1 1 B P 4 1 B P 2 1 B P silabs.com | Building a more connected world. Rev. 1.0 | 82 9. Package Specifications 9.1 BGM13P Dimensions BGM13P Blue Gecko Bluetooth Module Data Sheet Package Specifications Figure 9.1. BGM13P Package Dimensions 9.2 BGM13P Module Footprint The figure below shows the Module footprint and PCB dimensions. Figure 9.2. BGM13P Footprint silabs.com | Building a more connected world. Rev. 1.0 | 83 9.3 BGM13P Recommended PCB Land Pattern The figure below shows the recommended land pattern. The antenna clearance section is not required for BGM13P module versions with a U.FL connector. BGM13P Blue Gecko Bluetooth Module Data Sheet Package Specifications Figure 9.3. BGM13P Recommended PCB Land Pattern silabs.com | Building a more connected world. Rev. 1.0 | 84 10. Tape and Reel Specifications 10.1 Tape and Reel Specification This section contains information regarding the tape and reel packaging for the BGM13P Blue Gecko Bluetooth Module. BGM13P Blue Gecko Bluetooth Module Data Sheet Tape and Reel Specifications 10.2 Reel Material and Dimensions Reel material: Polystyrene (PS) Reel diameter: 13 inches (330 mm) Number of modules per reel: 1000 pcs Disk deformation, folding whitening and mold imperfections: Not allowed Disk set: consists of two 13 inch (330 mm) rotary round disks and one central axis (100 mm) Antistatic treatment: Required Surface resistivity: 104 - 109 /sq. Figure 10.1. Reel Dimension Side View Symbol W0 W1 Dimensions [mm]
44.0 +0.5/-.0.0 48.0 silabs.com | Building a more connected world. Rev. 1.0 | 85 10.3 Module Orientation and Tape Feed The user direction of feed, start and end of tape on reel and orientation of the modules on the tape are shown in the figure below. BGM13P Blue Gecko Bluetooth Module Data Sheet Tape and Reel Specifications Figure 10.2. Module Orientation and Feed Direction 10.4 Cover Tape Information Figure 10.3. Cover Tape Information Symbol Thickness (T) Width (W) Dimensions [mm]
0.055 +0.005/-0.003 37.50 +0.30/-0.10 silabs.com | Building a more connected world. Rev. 1.0 | 86 BGM13P Blue Gecko Bluetooth Module Data Sheet Soldering Recommendations 11. Soldering Recommendations 11.1 Soldering Recommendations This section describes the soldering recommendations for the BGM13P module. BGM13P is compatible with industrial standard reflow profile for Pb-free solders. The reflow profile used is dependent on the thermal mass of the entire populated PCB, heat transfer efficiency of the oven, and particular type of solder paste used. Refer to technical documentations of particular solder paste for profile configurations. Avoid usining more than two reflow cycles. A no-clean, type-3 solder paste is recommended. A stainless steel, laser-cut and electro-polished stencil with trapezoidal walls should be used to assure good solder paste release. Recommended stencil thickness is 0.100mm (4 mils). Refer to the recommended PCB land pattern for an example stencil aperture size. For further recommendation, please refer to the JEDEC/IPC J-STD-020, IPC-SM-782 and IPC 7351 guidelines. silabs.com | Building a more connected world. Rev. 1.0 | 87 BGM13P Blue Gecko Bluetooth Module Data Sheet Certifications 12. Certifications 12.1 Qualified Antenna Types The BGM13P has been designed to operate with a standard 2.14 dBi dipole antenna. Any antenna of a different type or with a gain higher than 2.14 dBi is strictly prohibited for use with this device. Using an antenna of a different type or gain more than 2.14 dBi will require additional testing for FCC, CE and IC. The required antenna impedance is 50 . Table 12.1. Qualified Antennas for BGM13P Maximum Gain 2.14 dBi Antenna Type Dipole 12.2 Bluetooth BGM13P is based on prequalified RF-PHY component QDID 101562. To make a Bluetooth end product listing the module integrator should combine this QDID with the prequalified Wireless Gecko Link Layer and Wireless Gecko Host components. 12.3 CE The BGM13P22 module is in conformity with the essential requirements and other relevant requirements of the Radio Equipment Direc-
tive (RED) (2014/53/EU). Please note that every application using the BGM13P22 will need to perform the radio EMC tests on the end product, according to EN 301 489-17. Separate RF testing is not required provided that the customer follows the module manufacturer's recommendations and instructions and does not make modifications (e.g. to the provided antenna solutions or requirements). A formal DoC is available via www.silabs.com silabs.com | Building a more connected world. Rev. 1.0 | 88 BGM13P Blue Gecko Bluetooth Module Data Sheet Certifications 12.4 FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesirable operation. Any changes or modifications not expressly approved by Silicon Labs could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specif-
ic operating instructions for satisfying RF exposure compliance. This transmitter meets both portable and mobile limits as demonstrated in the RF Exposure Analysis and SAR test report. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM Responsibilities to comply with FCC Regulations:
OEM integrator is responsible for testing their end-product for any additional compliance requirements required with this module instal-
led (for example, digital device emissions, PC peripheral requirements, etc.). With BGM13P22 the antenna(s) must be installed such that a minimum separation distance of 9 mm is maintained between the radi-
ator (antenna) and all persons at all times. The transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter except in accord-
ance with FCC multi-transmitter product procedures. Important Note:
In the event that the above conditions cannot be met (for certain configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM inte-
grator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling The variants of BGM13P Modules are labeled with their own FCC ID. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the final end product must be labeled in a visible area with the following:
"Contains Transmitter Module FCC ID: QOQBGM13P"
Or
"Contains FCC ID: QOQBGM13P"
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module or change RF related parameters in the user manual of the end product. silabs.com | Building a more connected world. Rev. 1.0 | 89 BGM13P Blue Gecko Bluetooth Module Data Sheet Certifications 12.5 ISED Canada ISEDC This radio transmitter (IC: 5123A-BGM13P) has been approved by Industry Canada to operate with the antenna types listed above, with the maximum permissible gain indicared. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. This device complies with Industry Canadas license-exempt RSS standards. Operation is subject to the following two conditions:
1. This device may not cause interference; and 2. This device must accept any interference, including interference that may cause undesired operation of the device RF Exposure Statement Exception from routine SAR evaluation limits are given in RSS-102 Issue 5. The models BGM13P22A and BGM13P22E meet the given requirements when the minimum separation distance to human body is 20 mm. RF exposure or SAR evaluation is not required when the separation distance is same or more than stated above. If the separation dis-
tance is less than stated above the OEM integrator is responsible for evaluating the SAR. OEM Responsibilities to comply with IC Regulations The BGM13P modules have been certified for integration into products only by OEM integrators under the following conditions:
The antenna(s) must be installed such that a minimum separation distance as stated above is maintained between the radiator (an-
tenna) and all persons at all times. The transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter. As long as the two conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still respon-
sible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE In the event that these conditions cannot be met (for certain configurations or co-location with another transmitter), then the ISEDC authorization is no longer considered valid and the IC ID cannot be used on the final product. In these circumstances, the OEM integra-
tor will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate ISEDC authorization. End Product Labeling The BGM13P module is labeled with its own IC ID. If the IC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the final end product must be labeled in a visible area with the following:
Contains Transmitter Module IC: 5123A-BGM13P or Contains IC: 5123A-BGM13P The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module or change RF related parameters in the user manual of the end product. silabs.com | Building a more connected world. Rev. 1.0 | 90 BGM13P Blue Gecko Bluetooth Module Data Sheet Certifications ISEDC (Franais) Industrie Canada a approuv lutilisation de cet metteur radio (IC: 5123A-BGM13P) en conjonction avec des antennes de type dipo-
laire 2.14dBi ou des antennes embarques, intgre au produit. Lutilisation de tout autre type dantenne avec ce composant est pro-
scrite. Ce composant est conforme aux normes RSS, exonres de licence d'Industrie Canada. Son mode de fonctionnement est soumis aux deux conditions suivantes:
1. Ce composant ne doit pas gnrer dinterfrences. 2. Ce composant doit pouvoir est soumis tout type de perturbation y compris celle pouvant nuire son bon fonctionnement. Dclaration d'exposition RF L'exception tire des limites courantes d'valuation SAR est donne dans le document RSS-102 Issue 5. Les modules BGM13P22A and BGM13P22E rpondent aux exigences requises lorsque la distance minimale de sparation avec le corps humain est de 20 mm. La dclaration dexposition RF ou l'valuation SAR n'est pas ncessaire lorsque la distance de sparation est identique ou suprieure celle indique ci-dessus. Si la distance de sparation est infrieure celle mentionnes plus haut, il incombe l'intgrateur OEM de procd une valuation SAR. Responsabilits des OEM pour une mise en conformit avec le Rglement du Circuit Intgr Le module BGM13P a t approuv pour l'intgration dans des produits finaux exclusivement raliss par des OEM sous les conditions suivantes:
L'antenne (s) doit tre installe de sorte qu'une distance de sparation minimale indique ci-dessus soit maintenue entre le radiateur
(antenne) et toutes les personnes avoisinante, ce tout moment. Le module metteur ne doit pas tre localis ou fonctionner avec une autre antenne ou un autre transmetteur que celle indique plus haut. Tant que les deux conditions ci-dessus sont respectes, il nest pas ncessaire de tester ce transmetteur de faon plus pousse. Ce-
pendant, il incombe lintgrateur OEM de sassurer de la bonne conformit du produit fini avec les autres normes auxquelles il pour-
rait tre soumis de fait de lutilisation de ce module (par exemple, les missions des priphriques numriques, les exigences de p-
riphriques PC, etc.). REMARQUE IMPORTANTE ans le cas o ces conditions ne peuvent tre satisfaites (pour certaines configurations ou co-implantation avec un autre metteur), l'au-
torisation ISEDC n'est plus considre comme valide et le numro didentification ID IC ne peut pas tre appos sur le produit final. Dans ces circonstances, l'intgrateur OEM sera responsable de la rvaluation du produit final (y compris le transmetteur) et de l'ob-
tention d'une autorisation ISEDC distincte. tiquetage des produits finis Les modules BGM13P sont tiquets avec leur propre ID IC. Si l'ID IC n'est pas visible lorsque le module est intgr au sein d'un autre produit, cet autre produit dans lequel le module est install devra porter une tiquette faisant apparaitre les rfrence du module int-
gr. Dans un tel cas, sur le produit final doit se trouver une tiquette aisment lisible sur laquelle figurent les informations suivantes:
Contient le module transmetteur: 5123A-BGM13P or Contient le circuit: 5123A-BGM13P L'intgrateur OEM doit tre conscient quil ne doit pas fournir, dans le manuel dutilisation, d'informations relatives la faon d'installer ou de denlever ce module RF ainsi que sur la procdure suivre pour modifier les paramtres lis la radio. silabs.com | Building a more connected world. Rev. 1.0 | 91 BGM13P Blue Gecko Bluetooth Module Data Sheet Certifications 12.6 Japan The BGM13P22A and BGM13P22E are certified in Japan with certification number 209-J00282. Since September 1, 2014 it is allowed (and highly recommended) that a manufacturer who integrates a radio module in their host equipment can place the certification mark and certification number (the same marking/number as depicted on the label of the radio module) on the outside of the host equipment. The certification mark and certification number must be placed close to the text in the Japanese language which is provided below. This change in the Radio Law has been made in order to enable users of the combination of host and radio module to verify if they are actually using a radio device which is approved for use in Japan. Certification Text to be Placed on the Outside Surface of the Host Equipment:
Translation of the text:
This equipment contains specified radio equipment that has been certified to the Technical Regulation Conformity Certification under the Radio Law. The "Giteki" marking shown in the figures below must be affixed to an easily noticeable section of the specified radio equipment. Note that additional information may be required if the device is also subject to a telecom approval. Figure 12.1. GITEKI Mark and ID Figure 12.2. GITEKI Mark silabs.com | Building a more connected world. Rev. 1.0 | 92 BGM13P Blue Gecko Bluetooth Module Data Sheet Revision History 13. Revision History Revision 1.0 February 2018 Updated 4.1 Electrical Characteristics with latest characterization data and test limits. Added certification details. Revision 0.2 December 2017 Added V2 part numbers to Table 2.1 Ordering Information on page 3. Revision 0.1 September 15, 2017 Initial Release. silabs.com | Building a more connected world. Rev. 1.0 | 93 http://www.silabs.comSilicon Laboratories Inc.400 West Cesar ChavezAustin, TX 78701USASimplicity StudioOne-click access to MCU and wireless tools, documentation, software, source code libraries & more. Available for Windows, Mac and Linux!IoT Portfoliowww.silabs.com/IoTSW/HWwww.silabs.com/simplicityQualitywww.silabs.com/qualitySupport and Communitycommunity.silabs.comDisclaimerSilicon Labs intends to provide customers with the latest, accurate, and in-depth documentation of all peripherals and modules available for system and software implementers using or intending to use the Silicon Labs products. Characterization data, available modules and peripherals, memory sizes and memory addresses refer to each specific device, and "Typical" parameters provided can and do vary in different applications. Application examples described herein are for illustrative purposes only. Silicon Labs reserves the right to make changes without further notice and limitation to product information, specifications, and descriptions herein, and does not give warranties as to the accuracy or completeness of the included information. Silicon Labs shall have no liability for the consequences of use of the information supplied herein. This document does not imply or express copyright licenses granted hereunder to design or fabricate any integrated circuits. The products are not designed or authorized to be used within any Life Support System without the specific written consent of Silicon Labs. A "Life Support System" is any product or system intended to support or sustain life and/or health, which, if it fails, can be reasonably expected to result in significant personal injury or death. Silicon Labs products are not designed or authorized for military applications. Silicon Labs products shall under no circumstances be used in weapons of mass destruction including (but not limited to) nuclear, biological or chemical weapons, or missiles capable of delivering such weapons.Trademark InformationSilicon Laboratories Inc. , Silicon Laboratories, Silicon Labs, SiLabs and the Silicon Labs logo, Bluegiga, Bluegiga Logo, Clockbuilder, CMEMS, DSPLL, EFM, EFM32, EFR, Ember, Energy Micro, Energy Micro logo and combinations thereof, "the worlds most energy friendly microcontrollers", Ember, EZLink, EZRadio, EZRadioPRO, Gecko, ISOmodem, Micrium, Precision32, ProSLIC, Simplicity Studio, SiPHY, Telegesis, the Telegesis Logo, USBXpress, Zentri and others are trademarks or registered trademarks of Silicon Labs. ARM, CORTEX, Cortex-M3 and THUMB are trademarks or registered trademarks of ARM Holdings. Keil is a registered trademark of ARM Limited. All other products or brand names mentioned herein are trademarks of their respective holders.
1 2 3 | User Manual | Users Manual | 472.44 KiB |
INSTALLATION GUIDE Alberga Business Park, Bertel Jungin aukio 3 FI-02600 Espoo, Finland Phone: +358 9 435 5060 www.silabs.com Figure 9.4: Recommended PCB Land Pattern Qualified Antenna Types This device has been designed to operate with a standard 2.14 dBi dipole antenna. Any antenna of a different type or with a gain higher than 2.14 dBi is strictly prohibited for use with this device. Using an antenna of a different type or gain more than 2.14 dBi will require additional testing for FCC, CE and IC. The required antenna impedance is 50 . Antenna type Dipole Maximum gain 2.14 dBi Table 1: Qualified antennas for BGM13Px Japan BGM13P22A and BGM13P22E models are certified in Japan with certification number 209-
J00282. Since September 1, 2014 it is allowed (and highly recommended) that a manufacturer who integrates a radio module in their host equipment can place the certification mark and certification number (the same marking/number as depicted on the label of the radio module) on the outside of the host equipment. The certification mark and certification number must be placed close to the text in the Japanese language which is provided below. This change in the Radio Law has been made in order to enable users of the combination of host and radio module to verify if they are actually using a radio device which is approved for use in Japan. Certification Text to be Placed on the Outside Surface of the Host Equipment:
Page 2 of 7 Translation of the text:
This equipment contains specified radio equipment that has been certified to the Technical Regulation Conformity Certification under the Radio Law. The "Giteki" marking shown in the figure below must be affixed to an easily noticeable section of the specified radio equipment. Note that additional information may be required if the device is also subject to a telecom approval. Figure 1: GITEKI mark and ID CE Figure 2:GITEKI mark The BGM13P22 modules are in conformity with the essential requirements and other relevant requirements of the Radio Equipment Directive(RED). Please note that every application using the BGM13P will need to perform the radio EMC tests on the end product according toEN 301 489-17. Separate RF testing is not required provided that the customer follows the module manufacturer's recommendations and instructions and does not make modifications e.g. to the provided antenna solutions or requirements. A formal DoC is available via www.silabs.com Page 3 of 7 BGM13P32 module is in conformity with the essential requirements and other relevant requirements of the Radio Equipment Directive(RED) at nominal 10 dBm transmit power. The transmit power of the module is not limited and when an end product is using BGM13P32, the end product manufacturer is responsible that the end product is in inconformity of all relevant requirements of the RED. FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Silicon Labs could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter meets both portable and mobile limits as demonstrated in the RF Exposure Analysis. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM Responsibilities to comply with FCC Regulations OEM integrator is responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). With BGM13P32 the antenna(s) must be installed such that a minimum separation distance of 50.5 mm is maintained between the radiator (antenna) and all persons at all times. With BGM13P22 the antenna(s) must be installed such that a minimum separation distance of 9 mm is maintained between the radiator (antenna) and all persons at all times. The transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. IMPORTANT NOTE: In the event that the above conditions cannot be met (for certain configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization. Page 4 of 7 End Product Labeling The variants of BGM13P Modules are labeled with their own FCC ID. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the final product must be labeled in a visible area with the following:
Contains Transmitter Module FCC ID: QOQBGM13P or Contains FCC ID: QOQBGM13P The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module or change RF related parameters in the user manual of the end product. ISED Canada This radio transmitter (IC: 5123A-BGM13P) has been approved by Industry Canada to operate with the antenna types listed above with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device This device complies with Industry Canadas license-exempt RSS standards. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device RF Exposure Statement Exception from routine SAR evaluation limits are given in RSS-102 Issue 5. The models BGM13P32E and BGM13P32A meet the given requirements when the minimum separation distance to human body is 40 mm. The models BGM13P22A and BGM13P22E meet the given requirements when the minimum separation distance to human body is 20 mm. RF exposure or SAR evaluation is not required when the separation distance is same or more than stated above. If the separation distance is less than stated above the OEM integrator is responsible for evaluating the SAR. OEM Responsibilities to comply with IC Regulations The BGM13P modules has been certified for integration into products only by OEM integrators under the following conditions:
The antenna(s) must be installed such that a minimum separation distance as stated above is maintained between the radiator (antenna) and all persons at all times. Page 5 of 7 The transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter. As long as the two conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions cannot be met (for certain configurations or co-location with another transmitter), then the ISEDC authorization is no longer considered valid and the IC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate ISEDC authorization. End Product Labeling The BGM13P modules are labeled with their own IC ID. If the IC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the final end product must be labeled in a visible area with the following:
Contains Transmitter Module IC: 5123A-BGM13P or Contains IC: 5123A-BGM13P The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module or change RF related parameters in the user manual of the end product ISEDC (Franais) Industrie Canada a approuv lutilisation de cet metteur radio (IC: 5123A-BGM13P) en conjonction avec des antennes de type dipolaire 2.14dBi ou des antennes embarques, intgre au produit. Lutilisation de tout autre type dantenne avec ce composant est proscrite. Ce composant est conforme aux normes RSS, exonres de licence d'Industrie Canada. Son mode de fonctionnement est soumis aux deux conditions suivantes :
1. Ce composant ne doit pas gnrer dinterfrences 2. Ce composant doit pouvoir est soumis tout type de perturbation y compris celle pouvant nuire son bon fonctionnement. Dclaration d'exposition RF L'exception tire des limites courantes d'valuation SAR est donne dans le document RSS-
102 Issue 5. Les modules BGM13P32GA et BGM13P32GE rpondent aux exigences requises lorsque la distance minimale de sparation avec le corps humain est de 40 mm. Les modules BGM13P22GA et BGM13P22GA rpondent aux exigences requises lorsque la distance minimale de sparation avec le corps humain est de 20 mm. La dclaration dexposition RF ou l'valuation SAR n'est pas ncessaire lorsque la distance de sparation est identique ou suprieure celle indique ci-dessus. Si la distance de sparation est infrieure celle mentionnes plus haut, il incombe l'intgrateur OEM de procd une valuation SAR. Page 6 of 7 Responsabilits des OEM pour une mise en conformit avec le Rglement du Circuit Intgr Le module BGM13P a t approuv pour l'intgration dans des produits finaux exclusivement raliss par des OEM sous les conditions suivantes:
L'antenne (s) doit tre installe de sorte qu'une distance de sparation minimale indique ci-dessus soit maintenue entre le radiateur
(antenne) et toutes les personnes avoisinante, ce tout moment. Le module metteur ne doit pas tre localis ou fonctionner avec une autre antenne ou un autre transmetteur que celle indique plus haut. Tant que les deux conditions ci-dessus sont respectes, il nest pas ncessaire de tester ce transmetteur de faon plus pousse. Cependant, il incombe lintgrateur OEM de sassurer de la bonne conformit du produit fini avec les autres normes auxquelles il pourrait tre soumis de fait de lutilisation de ce module (par exemple, les missions des priphriques numriques, les exigences de priphriques PC, etc.). REMARQUE IMPORTANTE: dans le cas o ces conditions ne peuvent tre satisfaites (pour certaines configurations ou co-implantation avec un autre metteur), l'autorisation ISEDC n'est plus considre comme valide et le numro didentification ID IC ne peut pas tre appos sur le produit final. Dans ces circonstances, l'intgrateur OEM sera responsable de la rvaluation du produit final (y compris le transmetteur) et de l'obtention d'une autorisation ISEDC distincte. tiquetage des produits finis Les modules BGM13P sont tiquets avec leur propre ID IC. Si l'ID IC n'est pas visible lorsque le module est intgr au sein d'un autre produit, cet autre produit dans lequel le module est install devra porter une tiquette faisant apparaitre les rfrence du module intgr. Dans un tel cas, sur le produit final doit se trouver une tiquette aisment lisible sur laquelle figurent les informations suivantes :
"Contient le module transmetteur : 5123A-BGM13P"
ou
"Contient le circuit: 5123A-BGM13P L'intgrateur OEM doit tre conscient quil ne doit pas fournir, dans le manuel dutilisation, d'informations relatives la faon d'installer ou de denlever ce module RF ainsi que sur la procdure suivre pour modifier les paramtres lis la radio. Page 7 of 7
1 2 3 | Cover Letters | Cover Letter(s) | 62.76 KiB | April 29 2020 |
SILICON LARS Letter of Authorization to Act as Agent Atm:
Re:
To Whom it May Concern I Application Examiner / Review Engineer I Officer in Charge Authority to Act as Agent for FCC and ISED Permissive Changes Dear Madam or Sir, We, Silicon Laboratories Finland Dy, a corporation validly organized and existing under the laws of Finland, having its principal place of business at Alberga Business Park, Bertel Jungin aukio 3, 02600 Espoo, Finland, hereby authorize Jenny Gibbs, Project Manager at Nemko Direct for Telecom (Nemko USA, Inc., 2648 FM 407, Suite 200, Bartonville, Texas 76226 USA! Tel: +1 800-614-3458 EXT 703! Mobile: +1 214-493-3604) to act on our behalf, as our agent, in FCC and ISED Permissive Change applications relating to the addition of four external antenna models to the one(s) already listed with our Bluetooth Low Energy wireless radio module with model name of BGM13P32E and having FCC ID: QOQ-BGM13P and lC:5123A-BGM13P This agent authorization includes report submittal, associated correspondence, signing of all documents relating to the Permissive Changes, and any other lawful activity necessary to obtain the equipment authorization. Submitted documents properly describe the device or system for which equipment evaluation is sought. Each unit manufactured, imported or marketed, as defined in FCC and ISED regulations will have affixed to it a label identical to that submitted for approval with this application. Any and all acts carried out by our authorized agent within the scope of this authorization shall have the same effect as acts of our own. For instances where our authorized agent signs the applications on our behalf, we acknowledge that all responsibility for complying with the relevant terms and conditions still resides with us. We also hereby certify that neither we nor any party to this application, as defined in 47 CFR 1.2002 (b), is subject to denial of U.S. federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-
Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. This authorization expires six months from the date of issue. Should there be any query regarding this letter, please do not hesitate to contact the undersigned. Thank you for your attention to this matter. Place and date of issue (of this letter):
Espoo, March 13, 2020 Senior Contact: Pasi Rahikkala Job Title: Staff Hardware Engineer, loT Wireless Modules eMail: pasi.rahikkala@silabs.com Silicon Laboratories Finland Oy Alberga Business Park Bertel Jungin aukio 3 Fl-02600 Espoo, Finland Phone: +358 9 435 5060 www.silabs.com Ref: SF00220248
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-04-29 | 2402 ~ 2480 | DTS - Digital Transmission System | Class II Permissive Change |
2 | 2018-10-18 | 2402 ~ 2480 | DTS - Digital Transmission System | Class II permissive change or modification of presently authorized equipment |
3 | 2018-02-20 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2020-04-29
|
||||
1 2 3 |
2018-10-18
|
|||||
1 2 3 |
2018-02-20
|
|||||
1 2 3 | Applicant's complete, legal business name |
Silicon Laboratories Finland Oy
|
||||
1 2 3 | FCC Registration Number (FRN) |
0007782659
|
||||
1 2 3 | Physical Address |
Alberga Business Park, Bertel Jungin aukio 3
|
||||
1 2 3 |
Espoo, N/A
|
|||||
1 2 3 |
Espoo, N/A 02600
|
|||||
1 2 3 |
Finland
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
S******@nemko.com
|
||||
1 2 3 |
h******@acbcert.com
|
|||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
QOQ
|
||||
1 2 3 | Equipment Product Code |
BGM13P
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
P****** R********
|
||||
1 2 3 | Title |
Staff HW Engineer
|
||||
1 2 3 | Telephone Number |
+3589********
|
||||
1 2 3 | Fax Number |
+3589********
|
||||
1 2 3 |
p******@silabs.com
|
|||||
app s | Technical Contact | |||||
1 2 3 | Firm Name |
Silicon Laboratories Finland Oy
|
||||
1 2 3 | Name |
P**** R******
|
||||
1 2 3 | Physical Address |
Alberga Business Park
|
||||
1 2 3 |
Espoo, 02600
|
|||||
1 2 3 |
Finland
|
|||||
1 2 3 | Telephone Number |
35840********
|
||||
1 2 3 |
p******@silabs.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Bluetooth 5.0 module | ||||
1 2 3 | BGM13P Bluetooth 5.0 module | |||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Single Modular Approval | ||||
1 2 3 | Purpose / Application is for | Class II Permissive Change | ||||
1 2 3 | Class II permissive change or modification of presently authorized equipment | |||||
1 2 3 | Original Equipment | |||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Output power is conducted. Modular Approval. Certified for mobile and portable use with the separation distances shown in the filing. Co-location with other transmitter antennas would require the use of FCC multi-transmitter product procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for use of this module in all configurations remains with the Grantee. C2PC application for adding additional antennae. | ||||
1 2 3 | Output power is conducted. Modular Approval. Certified for mobile and portable use with the separation distances shown in the filing. Co-location with other transmitter antennas would require the use of FCC multi-transmitter product procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for use of this module in all configurations remains with the Grantee. C2PC application for hardware changes as shown in the filing. | |||||
1 2 3 | Output power is conducted. Modular Approval. Certified for mobile and portable use with the separation distances shown in the filing. Co-location with other transmitter antennas would require the use of FCC multi-transmitter product procedures. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for use of this module in all configurations remains with the Grantee. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Nemko Canada Inc. (Montreal)
|
||||
1 2 3 |
SGS Fimko Oy
|
|||||
1 2 3 | Name |
C****** N********
|
||||
1 2 3 |
J******** M******
|
|||||
1 2 3 | Telephone Number |
613-7******** Extension:
|
||||
1 2 3 |
358-9********
|
|||||
1 2 3 | Fax Number |
613-7********
|
||||
1 2 3 |
358-9********
|
|||||
1 2 3 |
c******@nemko.com
|
|||||
1 2 3 |
j******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0912000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0912000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0912000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC