FCC ID: 2AJUN-ES02USB 2.4GHz wireless computer power and reset remote switch

Product Model No. SST-ES02-USB Product Description : 2.4GHz wireless computer power and reset remote switch Package Content 1 x ES02 adapter 1 x 250mm cable 1 x Remote To install ES02 properly, please follow the steps listed below:

Turn off your computer and unplug the power cord and all cables Remove your computers case cover Unplug the power cable and reset cable from motherboard Installation Guide STEP 1 Carefully install ES02 into the USB 9 pin connector on the motherboard (Figure 1.1), then connect the POWER SW and RESET SW to the corresponding pin headers on the motherboard. (Figure 1.2) Figure 1.1 USB 9 pin Connector Figure 1.2 Power / Rest pin photo

* If you cannot find the corresponding pin header to connect on your motherboard, please refer to your motherboard manual.

** If you have difficulty connecting to the motherboards USB 9 pin header, please use the included 90 degree adapter. STEP 2 Please remove the screw on the remote to insert the CR 2032 battery. Then secure the remote by reinstalling the removed screw. STEP 3 Plug in the power cord and other required cables by your computer then press the power button to turn it on. Q & A 1. Why cant I turn on the computer by pressing the power button?

Please check if the LED indicator blinks when pressing the Power or Reset button, if it doesnt blink, then you should change the battery. If it blinks, but still cant turn on the computer, please try the following steps:

1Unplug the computers power cord. 2Check if the POWER SW and RESET SW are connected in the correct position, be sure they are not loose. If these steps do not work, then check in motherboards BIOS / UEFI menu to make sure USB power on functions have been enabled. 2. Both LED indicators on the remote and the ES02 adapter both lit up, why doesnt my computer turn on when I press the button?

Solution: Resync the remote and the ES02 adapter. STEP 1: Please press and hold the black button for 3 seconds on the ES02 adapter until its indicator lights up STEP 2: Press any button on the remote until the indicator light turns off on the ES02 adapter Warranty Information:

This product has a limited 1 year warranty in North America, Europe, and Australia. For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor. Additional info & contacts For North America (usasupport@silverstonetek.com) SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested. Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All power supplies should be sent back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology in USA by first downloading the USA RMA form for end-users form from the below link and follow its instructions. http://silverstonetek.com/contactus.php For Australia only

(support@silverstonetek.com) Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Please refer to above Warranty terms &

conditions for further warranty details. SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238 (standard international call charges apply) For Europe

(support.eu@silverstonetek.de) For all other regions (support@silverstonetek.com) Notice ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynot causeharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause undesiredoperation. Changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser'sauthorityto operatetheequipment Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart15ofthe FCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation. Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththe instructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewill notoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,which canbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneor moreofthefollowingmeasures:

Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

SilverStone Technology Co., Ltd Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Request for Confidentiality Company name: SilverStone Technology Co., Ltd FCC ID : 2AJUN-ES02USB FCC Part 15 Certification Gentlemen, Pursuant to 47 CFR 0.457(d)(1)(ii) and 0.459 we hereby requests permanent confidentiality of the following documents for the subject application:

Exhibit Type Schematics Block Diagrams Operational Description Note: Exhibit types that are commonly held confidential are: (1) Schematics, (2) Block Diagrams, (3) Bill Of Materials, (4) Operational Descriptions. Any exhibit NOT granted confidentiality is viewable on the FCC website as soon as a grant is issued. These documents contain detailed system and equipment description and related information about the product which we considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Since the design is a basis from which future technological products will evolve, we consider that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Yours sincerely, Description All circuitry of devices and component values Details of device showing the frequency of all oscillators Description of the circuit functions Signatory Name Position Company Name SilverStone Technology Co., Ltd Address SCOTT YANG Manager 12F., No.168, Jiankang Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.)

+886-2-8228-1238

+886 2 8228 7123 Scott.yang@silverstonetek.com.tw Tel Fax Email

SilverStone Technology Co., Ltd SilverStone Technology Co., Ltd Product Certification 12F., No.168, Jiankang Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.) Date: 22.09.2016 Authority to Act as an Agent We declare that the following representative (agent) Name Position Company Name Shenzhen Alpha Product Testing Co., Ltd. Address Mark Zhu Manager Building B, East Area of Nanchang Second, Industrial Zone, Gushu 2nd Road, Bao'an, Shenzhen, China 0755-86375541/0755-26736857 mark@a-lab.cn Tel / Fax Email to act on our behalf on all matters concerning the application and documents submitted to PHOENIX TEST-LAB for product certification below Product Name Model Name Brand Name 2.4GHz wireless computer power and reset remote switch SST-ES02-USB N/A 2AJUN-ES02USB FCC ID:

Yours sincerely, Signatory Name Position Company Name SilverStone Technology Co., Ltd Address SCOTT YANG Manager 12F., No.168, Jiankang Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.)

+886-2-8228-1238

+886 2 8228 7123 Scott.yang@silverstonetek.com.tw Tel Fax Email In case of FCC, we certify that we are not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance.