FCC ID: 2AHY3-PX11 PicassoTab_X11

3 6 7 8 9 11.6 1920*1200 241.4x160.8x10.35mm 520g 10 FCC Statement PicassoTab_X11 has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modi cations to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Specific Absorption Rate (SAR) information:

PicassoTab_X11 meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: PicassoTab_X11 has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the PicassoTab_X11 kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an 0mm separation distance between the user's body and the back of the PicassoTab_X11. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

Page 1 of 1 FCC ID: 2AHY3-PX11 LABEL AND LOCATION Label Location Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: webmaster@lcs-cert.com | Web: www.lcs-cert.com Scan code to check authenticity

Simbans Limited 3412, 34/F, Cable TV tower 9 Hoi Shing Road, Tsuen Wan, Hong Kong Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-4-8 To whom it may concer:

We, Simbans Limited, hereby certify that the equipment for which authorization is sought (FCC ID:

2AHY3-PX11) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www foc. gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 DO1 Sincerely, Signature Shelly Garg Director Simbans Limited

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2024-4-8>

Pursuant to Paragraphs 0.457 and 0.459 of the Commission's Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID Model name 2AHY3-PX11 PicassoTab_X11 For the product stated above, we request that the following information be held confidential;

Long-Term Exhibits Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days Extemal Photos Internal Photos. Block Diagram Schematics Test Setup Photos:

User's Manual Parts List Tune Up BeOoaeReoo Operational Descriptions:

Dopooo0ol The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device If you have any questions, please feel free to contact me at the address shown below. Sincerely, Wz Name/Title; Shelly Garg/Director Company: Simbans Limited Address: 3412, 34/F, Cable TV tower 9 Hoi Shing Road, Tsuen Wan, Hong Kong Phone: +852-96557430 Fax: +852-39565760 E-Mail: shelly.garg@simbans.com

Simbans Limited 3412, 34/F, Cable TV tower 9 Hoi Shing Road, Tsuen Wan, Hong Kong. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-4-8 To whom it may concer:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act.on our behaffin all matters relating to applications for equipment authorization FCC ID: 2AHY3-PX11 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, 4g org. Name/Title: Shelly Garg/Director Simbans Limited 3412, 34/F, Cable TV tower 9 Hoi Shing Road, Tsuen Wan, Hong Kong

+852-96557430

+852-39565760 shelly.garg@simbans.com

Simbans Limited 3412, 34/F, Cable TV tower 9 Hoi Shing Road, Tsuen Wan, Hong Kong Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-4-9 U.S. Agent Designation Simbans Limited acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2AHY3-PX11) Name and company of U.S. agent: REP America LLC Physical U.S. address of agent 6510 S Academy Blvd, Ste A #523, Springs, CO 80906, United States FRN of US. agent: 0034192500 Email address of U.S. agent: dzeng@rep-europe.de REP America LLC acknowledges their obligation to accept service of process on behalf of Simbans Limited. Simbans Limited with the FRN [0028481276] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation ofthe applicable equipment within the U.S... or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(4\7) The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 Dot An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Signature Shelly Garg Ben Xu Director Manager Simbans Limited REP America LLC

Simbans Limited 3412, 34/F, Cable TV tower 9 Hoi Shing Road, Tsuen Wan, Hong Kong Date: 2024-4-8 FCC ID: 2AHY3-PX11 Model Number: PicassoTab_X11 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Simbans Limited, declare that this EUT (FCC ID: 2AHY3-PX11) doesnt have Ad Hoc mode function on non-US/Canada frequencies. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS. part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention Sincerely, aa Name/Title: Shelly Garg/Director Company: Simbans Limited Address: 3412, 34/F, Cable TV tower 9 Hoi Shing Road, Tsuen Wan, Hong Kong Phone: +852.96557430 Fax +852-39565760 E-Mail: shelly.garg@simbans.com

Simbans Limited 3412, 34/F, Cable TV tower 9 Hoi Shing Road, Tsuen Wan, Hong Kong UNII Device Declaration Letter To whom it may concern:

We have declared below featured for FCC equipment authorization, Device FCC ID: 2AHY3-PX11

(1)

(2)

(3)

(4)

(5) DFS Device: (Master [Client with Radar detection capability RNA (C Client without radar detection capability, Active / Passive Scanning , adhoc mode access point capability Active Scanning | passive scanning Frequency | (the device can | (where the device | Ad Hoc Mode Band (MHz) | transmita probe | is can listen only capability

(beacon)) with no probes) 5180-5240 [| [Yes | BdNo | Bives [ TINo | []ves[ DiNo [| []es | BNo 5190-5230 [| []Yes | DdNo | Pives { [jNo | []Yes | hiNo [ []es | No 5210-5210 | []Yes | No | Yes | [No | [Jes | No | []es | DX[No 5745-5825 | []Yes | No | MlYes [ [INo | [les | No | []Yes | X[No. 5755-5795 | []Yes | No | Yes | [No | [Jes | No | []es | DX[No 5775-5775 | []Yes | No | Yes | [No | [Jes | DiNo | []es | DX[No Country code selection ability [Yes BINo Ifyes, pls explain how it was implemented:

Meet 15.202 requirement Byes ONo pls check below DA master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode itis able to select a channel and initiate @ network by sending enabling signals to other devices BJA client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. DaApply Bd Does not apply

(if apply, pls help to provide explanation on it was implement, and how software was controlled) Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Ter

(Signed) Name/Title: Shelly Garg/Director Company: Simbans Limited Address: 3412, 34/F, Cable TV tower 9 Hoi Shing Road, Tsuen Wan, Hong Kong Phone: +852-96557430 Fax: +852-39565760 E-Mail: shelly.garg@simbans.com