| all | frequencies |
|
|
|
|
exhibits | applications |
|---|---|---|---|---|---|---|---|
| manual | photos | label | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
Users Manual | Users Manual | 2.99 MiB | July 29 2020 | |||
| 1 |
|
Internal Photos | Internal Photos | 345.18 KiB | July 29 2020 | |||
| 1 |
|
External Photos | External Photos | 837.86 KiB | July 29 2020 | |||
| 1 |
|
Label | ID Label/Location Info | 362.55 KiB | July 29 2020 | |||
| 1 |
|
Agent Authorization Letter | Cover Letter(s) | 8.21 KiB | July 29 2020 | |||
| 1 | BOM | Parts List/Tune Up Info | July 29 2020 | confidential | ||||
| 1 | Block Diagram | Block Diagram | July 29 2020 | confidential | ||||
| 1 |
|
Differences Description | Cover Letter(s) | 80.25 KiB | July 29 2020 | |||
| 1 |
|
Long term Confidentiality Letter | Cover Letter(s) | 16.10 KiB | July 29 2020 | |||
| 1 | Operation Description | Operational Description | July 29 2020 | confidential | ||||
| 1 |
|
RF Exposure | RF Exposure Info | 153.80 KiB | July 29 2020 | |||
| 1 | Schematics | Schematics | July 29 2020 | confidential | ||||
| 1 |
|
Single modular app letter | Cover Letter(s) | 158.04 KiB | July 29 2020 | |||
| 1 |
|
Test Report | Test Report | 1.05 MiB | July 29 2020 | |||
| 1 |
|
Test Setup Photos | Test Setup Photos | 697.29 KiB | July 29 2020 | |||
| 1 |
|
Text report Appendix A | Test Report | 2.87 MiB | July 29 2020 | |||
| 1 |
|
Text report Appendix B Part 1 | Test Report | 3.55 MiB | July 29 2020 | |||
| 1 |
|
Text report Appendix B Part2 | Test Report | 3.43 MiB | July 29 2020 | |||
| 1 |
|
Text report Appendix C | Test Report | 3.15 MiB | July 29 2020 | |||
| 1 |
|
Text report Appendix D | Test Report | 2.37 MiB | July 29 2020 | |||
| 1 | Tune Up Procedure | Parts List/Tune Up Info | July 29 2020 | confidential |
| 1 | Users Manual | Users Manual | 2.99 MiB | July 29 2020 |
SIM7600NA-H,SIM7600NA-H miniPCIE_User Manual Smart Machine Smart Decision Document Title SIM7600NA-H,SIM7600NA-H miniPCIE_user manual Version Date Status 1.00 2020-1-7 Released Document Control ID SIM7600NA-H,SIM7600NA-H miniPCIE _user manual _V1.00 General Notes SIMCom offers this information as a service to its users to support the application and engineering efforts that use the products designed by SIMCom. The information provided is based on the requirements specifically from the users. SIMCom has not undertaken any independent search for additional relevant information, including any information that may be in the users possession. Furthermore, the system validation of the product designed by SIMCom within a larger electronic system remains the responsibility of the user or the users system integrator. All specifications supplied herein are subject to change without notice. IC Caution:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. SIM7600NA-H_user manual _V1.00 2 2020-1-7 Smart Machine Smart Decision Ce matriel est complt par une exposition de rayonnements IC pour un environnement naturel. Ce matriel doit tre install et se faire avec une distance minimale de 20cm entre les radiateurs et les autresYour body shop. For a host manufactures using a certified modular, if (1) the modules IC number is not visible when installed in the host, or (2) if the host is marketed so that end users do not have straightforward commonly used methods for access to remove the module so that the IC number of the module is visible; then an additional permanent label referring to the enclosed module: Contains Transmitter Module IC: 23761-8PYA006 or Contains IC:
23761-8PYA006 must be used. This radio transmitter IC: 23761-8PYA006 has been approved by Imovation,Science and Economic Development Canada to operate with the antenna types listed below,with the maximm permissible gain indicated.Antenna types not included in this list that have gain greater than the maximm gain indicated for any type listed are strictly prohibilted for use with this device. Antenna List:
Type: Dipole antenna with non-standard SMA connector(50ohm) Model: MF25D Antenna Gain: Band 2:1.87dBi,Band 4:3.12dBi, Band 5:0.91dBi, Band 12:0.95dBi, Band 13:2.23dBi, Band 14:2.18dBi, Band 25:1.87dBi,Band 26:1.40dBi, Band 41:3.20dBi, Band 66:3.12dBi, Band 71:-0.48dBi Single Module FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The modular can be installed or integrated in mobile or fix devices only. This modular cannot be installed in any portable device. FCC Radiation Exposure Statement This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other SIM7600NA-H_user manual _V1.00 3 2020-1-7 Smart Machine Smart Decision antenna or transmitter. This modular must be installed and operated with a minimum distance of 20 cm between the radiator and user body. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following:
Contains Transmitter Module FCC ID: 2AJYU-8PYA005 Or Contains FCC ID:
2AJYU-8PYA005 When the module is installed inside another device, the user manual of the host must contain below warning statements;
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any company of the host device which install this modular with Single modular approval should perform the test of radiated emissionand spurious emission according to FCC part 15C : 15.247 and 15.209 requirement,Only if the test result comply with FCC part 15C : 15.247 and 15.209 requirementthen the host can be sold legally. Copyright This document contains the proprietary technical information which is the property of SIMCom Limited, copying of this document, giving it to others, the using or communication of the contents thereof are forbidden without the official authority by SIMCom. Offenders are liable to the payment of the damages. All rights are reserved in the event of grant of a patent or the registration of a utility model or design. All specifications supplied herein are subject to change without notice Copyright SIMCom Wireless Solutions Co., Ltd. 2020 SIM7600NA-H_user manual _V1.00 4 2020-1-7 Smart Machine Smart Decision 3 Contents Contents ............................................................................................................................................. 5 Revision History ................................................................................................................................ 7 1 Introduction ................................................................................................................................ 8 1.1 Product Outline ..................................................................................................................... 8 1.2 Hardware Interface Overview ............................................................................................... 8 1.3 Hardware Block Diagram.................................................................................................... 10 1.4 Functional Overview ........................................................................................................... 11 2 Package Information ............................................................................................................... 13 2.1 Pin Assignment Overview ................................................................................................... 13 2.2 Pin Description .................................................................................................................... 16 2.3 Mechanical Information ...................................................................................................... 21 2.4 Footprint Recommendation ................................................................................................. 22 Interface Application ............................................................................................................... 23 3.1 Power Supply ...................................................................................................................... 23 3.1.1 Power Supply Design Guide ........................................................................................ 24 3.1.2 Recommended Power Supply Circuit .......................................................................... 25 3.1.3 Voltage Monitor ............................................................................................................ 25 3.2 Power on/Power off/Reset Function .................................................................................... 26 3.2.1 Power on ....................................................................................................................... 26 Power off ...................................................................................................................... 27 3.2.2 3.2.3 Reset Function .............................................................................................................. 28 3.3 UART Interface ................................................................................................................... 29 3.3.1 UART Design Guide .................................................................................................... 29 3.3.2 RI and DTR Behavior ................................................................................................... 31 3.4 USB Interface ...................................................................................................................... 32 3.5 HSIC interface ..................................................................................................................... 33 3.7 SGMII Interface .................................................................................................................. 33 3.7.1 Reference schematic with AR8033 .............................................................................. 34 3.7.2 Reference schematic with BCM89820 ......................................................................... 35 3.8 USIM Interface.................................................................................................................... 36 3.8.1 USIM Application Guide .............................................................................................. 36 3.9 PCM Interface ..................................................................................................................... 40 PCM timing .................................................................................................................. 40 PCM Application Guide ............................................................................................... 41 SD Interface ..................................................................................................................... 42 I2C Interface .................................................................................................................... 44 SDIO Interface ................................................................................................................. 44 SPI Interface .................................................................................................................... 45 Network status ................................................................................................................. 45 3.10 3.11 3.12 3.13 3.14 3.9.1 3.9.2 SIM7600NA-H_user manual _V1.00 5 2020-1-7 Smart Machine Smart Decision 3.15 3.16 Flight Mode Control ........................................................................................................ 46 Other interface ................................................................................................................. 46 Sink Current Source .................................................................................................. 46 ADC .......................................................................................................................... 47 LDO .......................................................................................................................... 47 3.16.1 3.16.2 3.16.3 4 RF Specifications ...................................................................................................................... 49 4.7 GSM/UMTS/LTE RF Specifications .................................................................................. 49 4.8 GSM /UMTS/LTE Antenna Design Guide .......................................................................... 50 4.9 GNSS .................................................................................................................................. 52 4.9.1 GNSS Technical specification ...................................................................................... 52 4.9.2 GNSS Application Guide ............................................................................................. 52 5 Electrical Specifications ........................................................................................................... 54 5.7 Absolute maximum ratings ................................................................................................. 54 5.8 Operating conditions ........................................................................................................... 54 5.9 Operating Mode .................................................................................................................. 55 5.9.1 Operating Mode Definition .......................................................................................... 55 5.9.2 Sleep mode ................................................................................................................... 56 5.9.3 Minimum functionality mode and Flight mode ............................................................ 56 Current Consumption ....................................................................................................... 57 ESD Notes ....................................................................................................................... 57 5.10 5.11 6 SMT Production Guide ........................................................................................................... 59 6.7 Top and Bottom View of MODULE ................................................................................... 59 6.8 Label Information ................................................................................................................ 60 6.9 Typical SMT Reflow Profile ............................................................................................... 60 6.10 Moisture Sensitivity Level (MSL) ................................................................................... 61 Stencil Foil Design Recommendation ............................................................................. 62 6.11 7 Packaging .................................................................................................................................. 63 Appendix .......................................................................................................................................... 65
. Coding Schemes and Maximum Net Data Rates over Air Interface ....................................... 65
. Related Documents .................................................................................................................. 65
. Terms and Abbreviations ........................................................................................................ 68
. Safety Caution ......................................................................................................................... 70 SIM7600NA-H_user manual _V1.00 6 2020-1-7 Smart Machine Smart Decision Revision History Data Version Description of change 2020-1-7 1.00 Original Author Xutao.Jiang Qiang.Zhang SIM7600NA-H_user manual _V1.00 7 2020-1-7 Smart Machine Smart Decision 1 Introduction This document describes the electronic specifications, RF specifications, interfaces, mechanical characteristics and testing results of the SIMCom MODULE. With the help of this document and other software application notes/user guides, users can understand and use MODULE to design and develop applications quickly. 1.1 Product Outline Aimed at the North American market, the MODULE support GSM, WCDMA, LTE-TDD and LTE-FDD. Users can choose the MODULE according to the wireless network configuration. The supported radio frequency bands are described in the following table. Table 1: Module frequency bands Standar d Frequency SIM7600NA SIM7600NA-H FDD B14 FDD B2 FDD B4 FDD B5 FDD B12 FDD B13 FDD B25 FDD B26 FDD B71 FDD B66 TDD B41 Category CAT1 CAT4 With a small physical dimension of 30*30*2.9 mm and with the functions integrated, the MODULE can meet almost any space requirement in users applications, such as smart phone, PDA, industrial handheld, machine-to-machine and vehicle application, etc. 1.2 Hardware Interface Overview The interfaces are described in detail in the next chapters include:
Power Supply USB2.0 Interface UART Interface MMC/SD Interface SDIO Interface USIM Interface SPI Interface SIM7600NA-H_user manual _V1.00 8 2020-1-7 Smart Machine Smart Decision GPIO ADC LDO Power Output Current Sink Source PCM Interface SPI Interface I2C Interface HSIC Interface SGMII Interface SIM7600NA-H_user manual _V1.00 9 2020-1-7 Smart Machine Smart Decision 1.3 Hardware Block Diagram The block diagram of the MODULE is shown in the figure below. Figure 1: MODULE block diagram SIM7600NA-H_user manual _V1.00 10 2020-1-7 Smart Machine Smart Decision 1.4 Functional Overview Table 2: General features Implementation Single supply voltage 3.44.2V, Recommend supply voltage 3.8V Feature Power supply Power saving Current in sleep mode : <5mA Radio frequency bands Please refer to the table 1 Transmitting power Data Transmission Throughput Antenna GNSS SMS LTE power class: 3 (0.25W) LTE CAT 1: 10 Mbps(DL) 5 Mbps(UL) LTE CAT 4 :150 Mbps (DL) 50 Mbps (UL) LTE main antenna. LTE auxiliary antenna GNSS antenna GNSS engine (GPS,GLONASS and BD) Protocol: NMEA 0183 MT, MO, CB, Text and PDU mode SMS storage: USIM card or ME(default) Transmission of SMS alternatively over CS or PS. USIM interface Support identity card: 1.8V/ 3V USIM application toolkit Support SAT class 3, GSM 11.14 Release 98 Support USAT Phonebook management Support phonebook types: DC,MC,RC,SM,ME,FD,ON,LD,EN Audio feature Support PCM interface Only support PCM master mode and short frame sync, 16-bit linear data formats UART interface A full modem serial port by default Baud rate: 300bps to 4Mbps(default:115200bps) Auto baud rate: 9600,19200,38400,57600,115200bps Can be used as the AT commands or data stream channel Support RTS/CTS hardware handshake Multiplex ability according to GSM 07.10 Multiplexer Protocol MMC/SD Support MMC and SD cards with 2.85 V on SD port SDIO USB Support SDIO with 1.8 V only on SDIO port USB 2.0 high speed interface, Can used be send AT command, Software update, GNSS NMEA,USB voice function etc. Firmware upgrade Firmware upgrade over USB interface or FOTA SIM7600NA-H_user manual _V1.00 11 2020-1-7 Smart Machine Smart Decision Physical characteristics Size:30*30*2.9m Weight:5.7 g Temperature range Normal operation temperature: -30C to +80C Extended operation temperature: -40C to +85C*
Storage temperature -45C to +90C
*Note: Module is able to make and receive voice calls, data calls, SMS and make GPRS/UMTS/HSPA+/LTE traffic in -40 ~ +85. The performance will be reduced slightly from the 3GPP specifications if the temperature is outside the normal operating temperature range and still within the extreme operating temperature range. SIM7600NA-H_user manual _V1.00 12 2020-1-7 Smart Machine Smart Decision 2 Package Information 2.1 Pin Assignment Overview All functions of the MODULE will be provided through 135 pads that will be connected to the users platform. The following Figure is a high-level view of the pin assignment of the MODULE. GND GND PWRKEY RESET GND
*SPI_CLK
*SPI_MISO
*SPI_MOSI
*SPI_CS GND USB_VBUS USB_DN USB_DP GND VDD_1V8 USB_ID USIM_DATA USIM_RST USIM_CLK USIM_VDD GND 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 81 GND 110 FLIGHTMODE*
88 89 90 91 92 93 94 95 RESERVED RESERVED RESERVED RESERVED RESERVED GND GPIO4 GPIO2 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 RESERVED 111 SGMII_INT_N 109 SGMII_RST_N 108 RESERVED 107 DBG_RXD 106 RESERVED 105 RESERVED 104 120-135 GND 85 USB_BOOT*
60 GND AUX_ANT 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 82 GND GND SDA SCL USIM_DET*
GPIO41*
NETLIGHT GPIO43*
STATUS SD_DET ADC1 ADC2 ISINK VDD_AUX GND GND DBG_TXD MAIN_ANT PCM I2C SPI RESERVED GND UART USB SDC VBAT USIM SDIO SGMII Figure 2: Pin assignment overview SIM7600NA-H_user manual _V1.00 13 2020-1-7 Smart Machine Smart Decision Table 3: Pin definition Pin No. Pin name Pin No. Pin name 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 GND PWRKEY GND SPI_MISO*
SPI_CS*
USB_VBUS USB_DP VDD_1V8 USIM_DATA USIM_CLK SD_CMD SD_DATA1 SD_DATA3 SDIO_DATA1 SDIO_CMD SDIO_DATA3 GPIO3*
HSIC_STROBE GND VBAT GND GND ISINK ADC1 SCL GND GND VBAT GND CTS STATUS NETLIGHT USIM_DET*
AUX_ANT 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 GND RESET SPI_CLK*
SPI_MOSI*
GND USB_DN GND USB_ID USIM_RST USIM_VDD SD_DATA0 SD_DATA2 SD_CLK SDIO_DATA2 SDIO_DATA0 SDIO_CLK GPIO6*
HSIC_DATA VBAT GND DBG_TXD VDD_AUX ADC2 SD_DET GPIO43*
GPIO41*
SDA GND GND VBAT GND RTS RXD FLIGHTMODE*
SIM7600NA-H_user manual _V1.00 14 2020-1-7 Smart Machine Smart Decision 69 71 73 75 77 79 81 83 85 87 89 91 93 95 97 99 101 103 105 107 109 111 113 115 117 119 121 123 125 127 129 131 133 135 BOOT_CFG0*
RI TXD PCM_OUT PCM_SYNC GND GNSS_ANT GND COEX1*
GPIO77 RESERVED RESERVED GND GPIO2 GPIO_54 RESERVED RESERVED RESERVED RESERVED RESERVED SGMII_INT_N RESERVED SGMII_RX_M SGMII_TX_P SGMII_MDC GPIO_19 GND GND GND GND GND GND GND GND 70 72 74 76 78 80 82 84 86 88 90 92 94 96 98 100 102 104 106 108 110 112 114 116 118 120 122 124 126 128 130 132 134 DCD DTR PCM_IN PCM_CLK GND GND MAIN_ANT COEX2*
COEX3*
RESERVED RESERVED RESERVED GPIO4 GPIO1 GND RESERVED RESERVED RESERVED DBG_ RXD SGMII_RST_N GND SGMII_RX_P SGMII_TX_M SGMII_MDIO GND GND GND GND GND GND GND GND GND NOTE: Means Before the normal power up, COEX1, COEX3 or BOOT_CFG0 cannot be pulled up, otherwise module will not be powered up normally. SIM7600NA-H_user manual _V1.00 15 2020-1-7
* Means that pins has MUX function. Smart Machine Smart Decision 2.2 Pin Description Table 4: IO parameters definition Pin type Description Power input Power output Analog input PI PO AI AIO I/O DI DO DOH DOL PU PD Analog input/output Bidirectional input /output Digital input Digital output Digital output with high level Digital output with low level Pull up Pull down Table 5: Pin description Power supply VBAT 38,39, 62,63 PI VDD_AUX 44 PO VDD_1V8 15 PO GND Ground 1,2,5, 10,14,37
,40,41,4 3,57,58, 60,61,64
,65,77,7 8,80,81, 93,96,11 0,118,12 0,121,12 2,123,12 4,125,12 6,127,12 8,129,13 Pin name Pin No. Description Comment Default status Power supply, voltage range:
3.44.2V. LDO power output for other external circuits with Max 150mA current output. Its output voltage is 2.85V by default.The voltage can be configured from 1.7V to 3.05V by AT command. 1.8 output with Max 50mA current output for external circuit, such as level shift circuit. If used SGMII function ,this pin used for SGMII function. If unused, keep it open. If unused, keep it open. SIM7600NA-H_user manual _V1.00 16 2020-1-7 3 4 21 22 23 24 25 26 48 18 19 6 7 8 9 System Control PWRKEY RESET SD interface SD_CMD SD_DATA0 SD_DATA1 SD_DATA2 SD_DATA3 SD_CLK Smart Machine Smart Decision 0,131,13 2,133,13 4135 DI,PU System power on/off control input, active low. DI, PU System reset control input, active low. The high voltage is 0.8V;
RESET has been pulled up to 1.8V via 40Kohm resistor internally. I/O,PD SDIO command I/O,PD I/O,PD I/O,PD I/O,PD SDIO data DO SDIO clock SD_DET DI,PU USIM interface SD card insertion detect H: SD card is removed L: SD card is inserted USIM Card data I/O, which has been pulled up via a 10KR resistor to USIM_VDD internally. Do not pull it up or down externally. USIM_DATA 17 I/O,PU USIM_RST DO,PD USIM Reset USIM_CLK DO,PD USIM clock USIM_VDD 20 PO,PD Power output for USIM card, its output Voltage depends on USIM card type automatically. Its output current is up to 50mA. If unused, keep them open. All lines of USIM interface should be protected against ESD. SPI interface SPI_CLK*
SPI_MISO*
SPI_MOSI*
SPI_CS*
USB DO DI DO DO SPI clock output SPI master in/slave out data SPI master out/slave in data SPI chip-select output Default SPI Optional: BT uart function USB_VBUS 11 AI USB_DN 12 AI, AO Valid USB detection input with 3.0~5.25V detection voltage Negative line of the differential, bi-directional USB signal. SIM7600NA-H_user manual _V1.00 17 2020-1-7 Smart Machine Smart Decision AI, AO Positive line of the differential, bi-directional USB signal. AI High-speed USB ID input Keep it open. USB_DP USB_ID 13 16 SGMII interface SGMII_RX_P 112 SGMII receive positive SGMII_RX_M 113 SGMII receive - negative SGMII_TX_M 114 SGMII transmit - negative SGMII_TX_P 115 SGMII transmit positive SGMII_RST_N 108 Ethernet PHY reset SGMII_INT_N 109 DI,PU Ethernet PHY interrupt AI AI AO AO DO SGMII_MDIO 116 DIO Management data input/output-data SGMII_MDC 117 DO Management data input/output-clock UART interface RTS CTS RXD RI DCD TXD DTR DBG_UART I2C interface SCL SDA SDIO interface SDIO_DATA1 SDIO_DATA2 66 67 68 69 70 71 72 55 56 27 28 DOH Request to send DI DI DOH DOH DOH DI,PU Clear to Send Receive Data Ring Indicator Carrier detects Transmit Data DTE get ready OD I2C clock output OD I2C data input/output I/O I/O SDIO data1 SDIO data2 DBG_TXD 42 DO Log output DBG_RXD 106 DI Log input SDIO_CMD SIM7600NA-H_user manual _V1.00 18 2020-1-7 SDIO command I/O 29 If unused, keep them open. External 1.5K pull-up resistor from 3.3V/2.5V to MDIO_DATA and 10K pull-up resistor from VDD_1V8 to ETH_INT_N are needed when the Ethernet PHY is connected. If unused, please keep them open. If unused, keep them open. If unused, keep them open. If unused, keep open, or else pull them up via 2.2K resistors to 1.8V. It can be used for WLAN function. If unused, please SDIO_DATA0 SDIO_DATA3 SDIO_CLK HSIC interface 30 31 32 PCM interface PCM_OUT PCM_IN PCM_SYNC PCM_CLK GPIO GPIO4 GPIO2 GPIO1 GPIO_54 GPIO_19 RF interface MAIN _ANT GNSS_ANT AUX_ANT Other interface ISINK ADC1 ADC2 73 74 75 76 49 94 95 96 97 82 79 59 45 47 Smart Machine Smart Decision SDIO data0 SDIO data3 SDIO clock I/O I/O DO I/O I/O HSIC_STROBE 35 HSIC strobe wakeup HSIC_DATA 36 HSIC data DO,PD PCM data output. DI,PD PCM data input. I/O,PD PCM data frame sync signal. I/O,PU PCM data bit clock. NETLIGHT 51 DO,PU STATUS DO,PU LED control output as network status indication. Operating status output. High level: Power on and firmware ready Low level: Power off IO,PD Default: GPIO IO,PD Default: GPIO IO,PD Default: GPIO IO,PD Default: GPIO 119 IO,PD Default: GPIO keep them open. If use, please refer to document [27]
Otherwise keep them open. please If unused, please keep them open. unused, If them open. keep AIO MAIN antenna soldering pad GNSS antenna soldering pad Auxiliary antenna soldering pad Ground-referenced current sink. Analog-digital converter input 1 Analog-digital converter input 2 If unused, please keep them open. AI AI PI AI AI 46 88,89,90
,91,92,9 9,100,10 1,102,10 3,104,10 5,107,11 1 RESERVED Reserved for future use Please keep open. them Mux function interface COEX1*
83 I/O RF synchronizing between Wi-Fi and LTE. Default:COEX1*
Option:WLAN_EN SIM7600NA-H_user manual _V1.00 19 2020-1-7 Smart Machine Smart Decision COEX2*
COEX3*
84 86 I/O I/O RFsynchronizing between Wi-Fi and LTE. RF synchronizing between Wi-Fi and LTE. Default:COEX2*
Option: WoWWAN Default:COEX3*
Option:BT_PCM_C LK Default:
BOOT_CFG0*
Option:COEX_RX D Do place 2 test points for debug. DO NOT PULL UP BOOT_CFG0 DURING NORMAL POWER UP!
Default:
FLIGHTMODE*
Option:BT_PCM_I N Default:GPIO3*
Option:WL_PWR_ EN Default:GPIO6*
Option:WL_SLP_C LK Default:USIM_DE T*
Option:BT_EN Default:GPIO77*
Option:BT_PCM_O UT Default:GPIO43*
Option:COEX_TX D Default:GPIO41*
Option:BT_PCM_S YNC Boot configuration input. Module will be forced into USB download mode by connect 85 pin to VDD_1V8 during power up. Flight Mode control input. High level(or open): Normal Mode Low level: Flight Mode Default: GPIO Optional: USIM card detecting input. H: USIM is removed L: USIM is inserted BOOT_CFG0* 85 DI,PD FLIGHTMODE*
54 DI,PU GPIO3*
33 IO GPIO GPIO6*
34 IO GPIO USIM_DET*
53 IO GPIO77*
87 IO GPIO GPIO43*
I/O,PD GPIO GPIO41*
I/O,PD GPIO 50 52 SIM7600NA-H_user manual _V1.00 20 2020-1-7 Smart Machine Smart Decision 2.3 Mechanical Information The following figure shows the package outline drawing of MODULE. Figure 3: Dimensions (Unit: mm) SIM7600NA-H_user manual _V1.00 21 2020-1-7 Smart Machine Smart Decision 2.4 Footprint Recommendation Figure 4: Footprint recommendation (Unit: mm) SIM7600NA-H_user manual _V1.00 22 2020-1-7 Smart Machine Smart Decision 3 Interface Application 3.1 Power Supply The power supply pins of MODULE include 4 pins (pin 62&63, pin 38&39) named VBAT. The 4 VBAT pads supply the power to RF and baseband circuits directly. On VBAT pads, the ripple current up to 2A typically, due to GSM/GPRS emission burst (every 4.615ms), may cause voltage drop. So the power supply for these pads must be able to provide sufficient current up to more than 2A in order to avoid the voltage drop is more than 300mV. The following figure shows the VBAT voltage ripple wave at the maximum power transmit phase. Figure 5: VBAT voltage drop during burst emission (GSM/GPRS) Note: The test condition: The voltage of power supply for VBAT is 3.8V, Cd=100 F tantalum capacitor (ESR=0.7) and Cf=100nF (Please refer to Figure 6Application circuit). Table 6: VBAT pins electronic characteristic Symbol Description VBAT Module power voltage IVBAT(peak) Module power peak current in normal mode. IVBAT(average) Module power average current in normal mode IVBAT(sleep) Power supply current in sleep mode Min. Typ. Max. Unit 3.4 3.8
2 4.2
V A Please refer to the table 34 IVBAT(power-off) Module power current in power off mode.
20 uA SIM7600NA-H_user manual _V1.00 23 2020-1-7 Smart Machine Smart Decision 3.1.1 Power Supply Design Guide Make sure that the voltage on the VBAT pins will never drop below 3.4V, even during a transmit burst, when current consumption may rise up to 2A. If the voltage drops below 3.4V, the RF performance may be affected. Note: If the power supply for VBAT pins can support up to 2A, more than 300uF capacitors are recommended .Otherwise users must use a total of 1000uF capacitors typically, in order to avoid of the voltage drop more than 300mV. Some multi-layer ceramic chip (MLCC) capacitors (0.1/1uF) with low ESR in high frequency band can be used for EMC. These capacitors should be put as close as possible to VBAT pads. Also, users should keep VBAT trace on circuit board wider than 2 mm to minimize PCB trace impedance. The following figure shows the recommended circuit. Recommend Bead for vbat filter is BLM21PG300SN1D and MPZ2012S221A Figure 6: Power supply application circuit In addition, in order to guard for over voltage protection, it is suggested to use TVS. Note: user could only power pin 62, 63 or only power pin 38, 39, for these pins are connected inside the MODULE. Table 7: Recommended TVS list No. Manufacturer Part Number Power dissipation Package 1 2 3 4 5*
6*
JCET ESDBW5V0A1 WAYON WS05DPF-B WILLSEMI ESD5611N WILLSEMI ESD56151W05 PRISEMI PESDHC2FD4V5BH WAYON WS4.5DPV 5V 5V 5V 5V 4.5V 4.5V DFN1006-2L DFN1006-2L DFN1006-2L SOD-323 DFN1006-2L DFN1610-2L Note: If user chooses TVS, please pay attention to Clamping Voltage in your datasheet . For example when the surge input is 100V,the Clamping Voltage is less than 10V.
* If vbat is higher than 3.8V, do not choose 5 and 6. SIM7600NA-H_user manual _V1.00 24 2020-1-7 Smart Machine Smart Decision 3.1.2 Recommended Power Supply Circuit It is recommended that a switching mode power supply or a linear regulator power supply is used. It is important to make sure that all the components used in the power supply circuit can resist a peak current up to 2A. The following figure shows the linear regulator reference circuit with 5V input and 3.8V output. D N G Figure 7: Linear regulator reference circuit If there is a big voltage difference between input and output for VBAT power supply, or the efficiency is extremely important, then a switching mode power supply will be preferable. The following figure shows the switching mode power supply reference circuit. Figure 8: Switching mode power supply reference circuit Note: The Switching Mode power supply solution for VBAT must be chosen carefully against Electro Magnetic Interference and ripple current from depraving RF performance. 3.1.3 Voltage Monitor To monitor the VBAT voltage, the AT command AT+CBC can be used. For monitoring the VBAT voltage outside or within a special range, the AT command AT+CVALARM can be used to enable the under-voltage warning function. If users need to power off MODULE, when the VBAT voltage is out of a range, the AT command AT+CPMVT can be used to enable under-voltage power-off function. Note: Under-voltage warning function and under-voltage power-off function are disabled by default. For more information about these AT commands, please refer to Document [1]. SIM7600NA-H_user manual _V1.00 25 2020-1-7 Smart Machine Smart Decision 3.2 Power on/Power off/Reset Function 3.2.1 Power on MODULE can be powered on by pulling the PWRKEY pin down to ground. The PWRKEY pin has been pulled up with a diode to 1.8V internally, so it does not need to be pulled up externally. It is strongly recommended to put a100nF capacitor, an ESD protection diode, close to the PWRKEY pin as it would strongly enhance the ESD performance of PWRKEY pin. Please refer to the following figure for the recommended reference circuit. Figure 9: Reference power on/off circuit Note: Module could be automatically power on by connecting PWRKEY pin to ground via 0R resistor directly. The power-on scenarios are illustrated in the following figure. VBAT PWRKEY
(Input) STATUS
(Output) Ton Ton(status Ton(uart
) Ton(usb) UART Port Undefined USB Port Undefined VDD_AUX Ton(vdd_aux) Active Active Figure 10: Power on timing sequence SIM7600NA-H_user manual _V1.00 26 2020-1-7 Smart Machine Smart Decision Ton Ton(status) VIH VIL Table 8: Power on timing and electronic characteristic Symbol Parameter Min. Max. Unit The time of active low level impulse of PWRKEY pin to power on MODULE 100 500
ms The time from power-on issue to STATUS pin output high level(indicating power up ready ) 15 16 Ton(uart) The time from power-on issue to UART port ready 13 Ton(vdd_aux) The time from power-on issue to VDD_AUX ready Ton(usb) The time from power-on issue to USB port ready Input high level voltage on PWRKEY pin Input low level voltage on PWRKEY pin
-0.3 0 11 0.6 Ty p. 14 2.5 12 0.8
1.8 0.5 s s s s V V 3.2.2 Power off The following methods can be used to power off MODULE. Method 1: Power off MODULE by pulling the PWRKEY pin down to ground. Method 2: Power off MODULE by AT command AT+CPOF. Method 3: over-voltage or under-voltage automatic power off. The voltage range can be set by AT command AT+CPMVT. Method 4: over-temperature or under-temperature automatic power off. Note: If the temperature is outside the range of -30~+80, some warning will be reported via AT port. If the temperature is outside the range of -40~+85, MODULE will be powered off automatically. For details about AT+CPOF and AT+CPMVT, please refer to Document [1]. These procedures will make MODULE disconnect from the network and allow the software to enter a safe state, and save data before MODULE be powered off completely. The power off scenario by pulling down the PWRKEY pin is illustrated in the following figure. SIM7600NA-H_user manual _V1.00 27 2020-1-7 Smart Machine Smart Decision Toff Toff-on Ton PWRKEY
( Input ) STATUS
(Output) Toff(status) Toff(uart) Toff(usb) UART Port Active Undefined USB Port Active Undefined Figure 11: Power off timing sequence Table 9: Power off timing and electronic characteristic Symbol Parameter Time value Min. Typ. Max. Unit Toff Toff(status) Toff(uart) Toff(usb) Toff-on The active low level time pulse on PWRKEY pin to power off MODULE
2.5
The time from power-off issue to STATUS pin output low level(indicating power off )*
The time from power-off issue to UART port off The time from power-off issue to USB port off The buffer time from power-off issue to power-on issue 25 14 27 0 26 15 28
s s s s s
*Note: The STATUS pin can be used to detect whether MODULE is powered on or not. When MODULE has been powered on and firmware goes ready, STATUS will be high level, or else STATUS will still low level. 3.2.3 Reset Function MODULE can be reset by pulling the RESET pin down to ground. Note: This function is only used as an emergency reset, when AT command AT+CPOF and the PWRKEY pin all have lost efficacy. The RESET pin has been pulled up with a 40K resistor to 1.8V internally, so it does not need to be pulled up externally. It is strongly recommended to put a100nF capacitor and an ESD protection diode close to the RESET pin. Please refer to the following figure for the recommended reference circuit. SIM7600NA-H_user manual _V1.00 28 2020-1-7 Smart Machine Smart Decision Figure 12: Reference reset circuit Treset VIH VIL Table 10: RESET pin electronic characteristic Symbol Description The active low level time impulse on RESET pin to reset MODULE Input high level voltage Input low level voltage Min. Typ. Max. Unit 100 200 500 ms 1.17
-0.3 1.8 0 2.1 0.8 V V 3.3 UART Interface MODULE provides a 7-wire UART (universal asynchronous serial transmission) interface as DCE
(Data Communication Equipment). AT commands and data transmission can be performed through UART interface. 3.3.1 UART Design Guide The following figures show the reference design. SIM7600NA-H_user manual _V1.00 29 2020-1-7 Smart Machine Smart Decision Figure 13: UART full modem Figure 14: UART null modem The MODULE UART is 1.8V voltage interface. If users UART application circuit is 3.3V voltage interface, the level shifter circuits should be used for voltage matching. The TXB0108RGYR provided by Texas Instruments is recommended. The following figure shows the voltage matching reference design. Figure 15: Reference circuit of level shift User can use another level shifter circuits as follow SIM7600NA-H_user manual _V1.00 30 2020-1-7 Smart Machine Smart Decision Figure 16: level matching circuit To comply with RS-232-C protocol, the RS-232-C level shifter chip should be used to connect MODULE to the RS-232-C interface, for example SP3238ECA, etc. Note1: User needs to use high speed transistors such as MMBT3904. Note2: MODULE supports the following baud rates: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600, 3200000, 3686400, 4000000bps. The default band rate is 115200bps. 3.3.2 RI and DTR Behavior The RI pin can be used to interrupt output signal to inform the host controller such as application CPU. Normally RI will keep high level until certain conditions such as receiving SMS, or a URC report coming, and then it will change to low level. Figure 17: RI behaviourSMS and URC report SIM7600NA-H_user manual _V1.00 31 2020-1-7 Smart Machine Smart Decision Normally RI will be kept at a high level until a voice call, then it will output periodic rectangular wave with 5900ms low level and 100ms high level. It will output this kind of periodic rectangular wave until the call is answered or hung up. Figure 18 : RI behaviourvoice call Note: For more details of AT commands about UART, please refer to document [1] and [22]. DTR pin can be used to wake MODULE from sleep. When MODULE enters sleep mode, pulling down DTR can wake MODULE. 3.4 USB Interface The MODULE contains a USB interface compliant with the USB2.0 specification as a peripheral, but the USB charging function is not supported. MODULE can be used as a USB device. MODULE supports the USB suspend and resume mechanism which can reduce power consumption. If there is no data transmission on the USB bus, MODULE will enter suspend mode automatically, and will be resumed by some events such as voice call, receiving SMS, etc. v Figure 19: USB reference circuit SIM7600NA-H_user manual _V1.00 32 2020-1-7 Smart Machine Smart Decision Because of the high bit rate on USB bus, more attention should be paid to the influence of the junction capacitance of the ESD component on USB data lines. Typically, the capacitance should be less than 1pF. It is recommended to use an ESD protection component such as ESD9L5.0ST5G provided by On Semiconductor (www.onsemi.com ). D3 is suggested to select the diode with anti-ESD and voltage surge function, or user could add a TVS for surge clamping. The recommend TVS please refer to table 7. NoteThe USB_DN and USB_DP nets must be traced by 90Ohm+/-10% differential impedance. 3.5 HSIC interface HSIC is a 2-signal source synchronous serial interface which uses 240MHz DDR signaling to provide High-Speed 480Mbps USB transfers which are 100% host driver compatible with traditional USB cable-connected topologies. Full-Speed (FS) and Low-Speed (LS) USB transfers are not directly supported by the HSIC interface (a HSIC enabled hub can provide FS and LS support, as well as IC_USB support) The differences between HSIC and USB2.0 are listed below:
Table 11: Key differences between HSIC and HS-USB HSIC Signal-ended signaling at 1.2 V Two signals STROBE, DATA Double data rate signaling HS-USB 480 Mbps only USB2.0 Differential signaling Four wires Ground, D+, D-, VBUS Data inferred from differential signaling HS/FS/LS support Maximum trace length of 10 cm Maximum cable length of 5 m No HS chirp protocol HS chirp protocol Lower power consumption (digital) Higher power consumption (analog) No concept of disconnect Hot plug/play support module implements a HSIC interface compliant with the HSIC1.0 specification which can be used to connect to the external IC. Note: The module HSIC default work as HSIC to LAN function, if user have any other questions , please contact simcom for more details. 3.6 SGMII Interface MODULE provides a SGMII interface with an Ethernet MAC embedded, users could add a PHY to connect to the Ethernet, and the PHY device could be controlled by the MDIO interface and other dedicated signals. Two Ethernet PHY are supported: AR8031/AR8033 (Qualcomm) and BCM89820 (Broadcom). The AR8031/AR8033 is used for the industrial field and the BCM89820 is dedicated for the automotive field. Main features of SGMII:
Ethernet Mac integrated in the module Supports IEEE 1588, Precision Time Protocol (PTP) IEEE 802.3 Ethernet 10/100/1000Mbps, SGMII IF SIM7600NA-H_user manual _V1.00 33 2020-1-7 Smart Machine Smart Decision Full duplex rated to 1 Gbps Half/full duplex for 10/100 Mbps Can be external Ethernet PHY 10/100/1000Mbps), BCM89820(automotive 10/100Mbps) connected to like AR8031/AR8033(industrial Uses 8B10B encoding of data with effective baud data rate of 1 Gbps, data rate is always 1.25 Gbps (or DDR clock is always at 625 MHz) Main features of MDIO:
Host mode only Dual voltage: 1.8 V or 2.85 V operation Default signal frequency: 6.25MHz MDIO_DATA is OD-gate, and requires an external 1.5 k pull-up resistor to VMDIO. For the AR8031/AR8033, User should provide 3.3V to power the external Ethernet PHY system and the current should be more than 200mA. 3.6.1 Reference schematic with AR8033 Figure20: Reference SGMII circuit with AR8033 For the BCM89820, Users should provide 3.3V and 1.2V to power the external Ethernet PHY system and the data interface of PHY. The current of 3.3V and 1.2V should be more than 100mA and 150mA. SIM7600NA-H_user manual _V1.00 34 2020-1-7 Smart Machine Smart Decision 3.6.2 Reference schematic with BCM89820 Figure21: Reference SGMII circuit with BCM89820 Note: The module SGMII function default closed. If user need, please contact SIMCom for more details or refer to document [28]
SIM7600NA-H_user manual _V1.00 35 2020-1-7 Smart Machine Smart Decision 3.7 USIM Interface USIM_ VDD VIH VIL VOH VOL USIM_ VDD VIH VIL VOH VOL MODULE supports both 1.8V and 3.0V USIM Cards. Table 12: USIM electronic characteristic in 1.8V mode (USIM_VDD=1.8V) Symbol Parameter Min. Typ. Max. LDO power output voltage 1.75 1.8 1.95 High-level input voltage 0.65*USIM_VDD USIM_VDD +0.3 V Low-level input voltage
-0.3 0.35*USIM_VDD V High-level output voltage USIM_VDD -0.45 USIM_VDD Low-level output voltage 0 0.45 Table 13: USIM electronic characteristic 3.0V mode (USIM_VDD=2.95V) Symbol Parameter Min. Typ. Max. LDO power output voltage 2.75 2.95 3.05 High-level input voltage 0.65*USIM_VDD USIM_VDD +0.3 V Low-level input voltage
-0.3 0.25*USIM_VDD V High-level output voltage USIM_VDD -0.45 USIM_VDD Low-level output voltage 0 0.45 3.7.1 USIM Application Guide It is recommended to use an ESD protection component such as ESDA6V1W5 produced by ST
(www.st.com ) or SMF15C produced by ON SEMI (www.onsemi.com ). Note that the USIM peripheral circuit should be close to the USIM card socket. The following figure shows the 6-pin SIM card holder reference circuit.
0
0
0
0 Unit V V V Unit V V V SIM7600NA-H_user manual _V1.00 36 2020-1-7 Smart Machine Smart Decision Figure 202: USIM interface reference circuit Note: USIM_DATA has been pulled up with a 10K resistor to USIM_VDD in MODULE. A 100nF capacitor on USIM_VDD is used to reduce interference. For more details of AT commands about USIM, please refer to document [1].USIM_CLK is very important signal, the rise time and fall time of USIM_CLK should be less than 40ns, otherwise the USIM card might not be initialized correctly. The USIM_DET pin is used for detection of the USIM card hot plug in. User can select the 8-pin USIM card holder to implement USIM card detection function. The following figure shows the 8-pin SIM card holder reference circuit. Figure 213: USIM interface reference circuit with USIM_DET If the USIM card detection function is not used, user can keep the USIM_DET pin open. SIM7600NA-H_user manual _V1.00 37 2020-1-7 Smart Machine Smart Decision SIM card circuit is susceptible, the interference may cause the SIM card failures or some other situations, so it is strongly recommended to follow these guidelines while designing:
Make sure that the SIM card holder should be far away from the antenna while in PCB layout. SIM traces should keep away from RF lines, VBAT and high-speed signal lines. The traces should be as short as possible. Keep SIM holders GND connect to main ground directly. Recommended to place a 0.11uF capacitor on USIM_VDD line and keep close to the Shielding the SIM card signal by ground. holder. The rise/fall time of USIM_CLK should not be more than 40ns. Add some TVS and the parasitic capacitance should not exceed 60pF. SIM7600NA-H_user manual _V1.00 38 2020-1-7 Smart Machine Smart Decision Recommended USIM Card Holder It is recommended to use the 6-pin USIM socket such as C707 10M006 512 produced by Amphenol. User can visit http://www.amphenol.com for more information about the holder. Figure 224: Amphenol SIM card socket Table 14: Amphenol USIM socket pin description Signal USIM_VDD USIM_RST USIM_CLK GND VPP USIM_DATA Description USIM Card Power supply. USIM Card Reset. USIM Card Clock. Connect to GND. NC USIM Card data I/O. Pin C1 C2 C3 C5 C6 C7 SIM7600NA-H_user manual _V1.00 39 2020-1-7 Smart Machine Smart Decision 3.8 PCM Interface MODULE provides a PCM interface for external codec, which can be used in master mode with short sync and 16 bits linear format. Table 15: PCM format Characteristics Specification Line Interface Format Linear(Fixed) Data length 16bits(Fixed) PCM Clock/Sync Source Master Mode(Fixed) PCM Clock Rate 2048 KHz (Fixed) PCM Sync Format Short sync(Fixed) Data Ordering MSB 3.8.1 PCM timing Note: For more details about PCM AT commands, please refer to document [1]. MODULE supports 2.048 MHz PCM data and sync timing for 16 bits linear format codec. Figure 235: PCM_SYNC timing Figure 246: EXT codec to MODULE timing SIM7600NA-H_user manual _V1.00 40 2020-1-7 Smart Machine Smart Decision s ns s ns ns ns ns ns ns ns ns ns 125 488 124.5 488 244 244 244 60 244 60 Figure 257: Module to EXT codec timing Parameter Description Min. Typ. Max. Unit Table 16: PCM timing parameters T(sync) PCM_SYNC cycle time T(synch) PCM_SYNC high level time T(syncl) PCM_SYNC low level time T(clk) PCM_CLK cycle time T(clkh) PCM_CLK high level time T(clkl) PCM_CLK low level time T(susync) PCM_SYNC setup time high before falling edge of PCM_CLK T(hsync) T(sudin) PCM_SYNC hold time after falling edge of PCM_CLK PCM_IN setup time before falling edge of PCM_CLK T(hdin) PCM_IN hold time after falling edge of PCM_CLK 10 T(pdout) Delay from PCM_CLK rising to PCM_OUT valid T(zdout) Delay from PCM_CLK falling HIGH-Z to PCM_OUT 160
3.8.2 PCM Application Guide The following figure shows the external codec reference design. SIM7600NA-H_user manual _V1.00 41 2020-1-7 Smart Machine Smart Decision Figure 268: Audio codec reference circuit 3.9 SD Interface MODULE provides a 4-bit SD/MMC/eMMC interface with clock rate up to 200 MHz. When connected to a SD or MMC card, the voltage of SD interface is 1.8/2.85V, which is compatible with Secure Digital Physical Layer Specification version 3.0 and SDIO Card Specification version 3.0.It supports up to 128GB SD cards. When connected to a eMMC card, the interface voltage will be a single 1.8V, which is compatible with eMMC Specification, version 4.5. It supports up to 128GB eMMC cards. Table 17: SD/MMC electronic characteristic as 2.85V (SD_DATA0-3SD_CLK and SD_CMD) Symbol Parameter Min. Typ. Max. Unit High-level input voltage 0.65*2.85 Low-level input voltage
-0.3 2.85+0.3 0.25*2.85 High-level output voltage 0.75*2.85 2.85 2.85 Low-level output voltage 0 0.15*2.85 Table 18: SD/MMC/eMMC electronic characteristic as 1.8V (SD_DATA0-3SD_CLK and SD_CMD) Symbol Parameter Min. Typ. Max. Unit High-level input voltage 0.7*1.8 Low-level input voltage
-0.3 1.8+0.2 0.3*1.8 High-level output voltage 1.8-0.4 1.8 1.8 Low-level output voltage 0 0.45 SIM7600NA-H_user manual _V1.00 42 2020-1-7 VIH VIL VOH VOL VIH VIL VOH VOL V V V V V V V V
0 0
0 0 Smart Machine Smart Decision Users should provide 2.85V to power SD card system and the current should more than 350mA, which is showed below as VCC_SD. ESD/EMI components should be arranged beside SD card socket. Refer to the following application circuit. Figure29: SD reference circuit Users should provide 2.85V to power eMMC card system and 1.8V to power the SDIO_DATA/CMD/CLK signals. The source of 2.85V should be able to provide more than 500mA* which showed below as VCC_eMMC, as the source of 1.8V should be able to provide more than 300mA* which showed below as VCCQ_1V8. ESD/EMI components should be arranged close to the eMMC card. Refer to the following application circuit. VCC_eMMC eMMC Module VCCQ_1V8 VCCQ_1V8 SD_CMD RESOUT_N SD_CLK SD_DATA0 SD_DATA1 SD_DATA2 SD_DATA3 VCC VCC VCC VCC VCCQ VCCQ VCCQ VCCQ VDDIM CMD RST CLK D0 D1 D2 D3 D4 D5 D6 D7 DS Figure 30: eMMC reference circuit
*NOTE: For the current of VCC_eMMC and VCCQ_1V8, users should better refer to the SIM7600NA-H_user manual _V1.00 43 2020-1-7 Smart Machine Smart Decision related datasheet of eMMC which is used. The listed current of 500mA and 300mA are just for your reference. SD/MMC/eMMC card layout guide lines:
Protect SD card signals from noisy signals (clocks, SMPS, etc.). Up to 200 MHz clock rate, 50 nominal, 10% trace impedance CLK to DATA/CMD length matching < 1 mm Total routing length < 50 mm Spacing to all other signals = 2x line width Bus capacitance < 10 pF 3.10 I2C Interface MODULE provides a I2C interface compatible with I2C specification, version 5.0, with clock rate up to 400 kbps. Its operation voltage is 1.8V. The following figure shows the I2C bus reference design. Figure31: I2C reference circuit NoteSDA and SCL do not have pull-up resistors in MODULE. So, 2 external pull up resistors are needed in application circuit. AT+CRIIC and AT+CWIIC AT commands could be used to read/write register values of the I2C peripheral devices. For more details about AT commands please refer to document [1]. 3.11 SDIO Interface MODULE provides a 4 bit 1.8V SDIO interface for WLAN solution with W58 module. The SDIO interface can be used for WLAN solution. Note: Special software version for CAT4 MODULEs supports this function. SIM7600NA-H_user manual _V1.00 44 2020-1-7 Smart Machine Smart Decision 3.12 SPI Interface SIM7600NA provides a SPI interface as a master only. It provides a duplex, synchronous, serial communication link with peripheral devices. Its operation voltage is 1.8V, with clock rates up to 50 MHz NoteFor more details of the AT commands about the SPI, please refer to document [1]. 3.13 Network status The NETLIGHT pin is used to control Network Status LED, its reference circuit is shown in the following figure. Figure32: NETLIGHT reference circuit Note: The value of the resistor named R depends on the LED characteristic. Table 19: NETLIGHT pin status NETLIGHT pin status Module status Always On Searching Network; Call Connect(include VOLTE,SRLTE) 200ms ON, 200ms OFF Data Transmit; 4G registered;
800ms ON, 800ms OFF 2G/3G registered network OFF Power off ;Sleep Note: NETLIGHT output low level as OFF, and high level as ON. SIM7600NA-H_user manual _V1.00 45 2020-1-7 Smart Machine Smart Decision 3.14 Flight Mode Control The FLIGHTMODE pin can be used to control MODULE to enter or exit the Flight mode. In Flight mode, the RF circuit is closed to prevent interference with other equipments and minimize current consumption. Bidirectional ESD protection component to add on FLIGHTMODE pin, its reference circuit is shown in the following figure. is suggested Figure 33: Flight mode switch reference circuit Table 20: FLIGHTMODE pin status FLIGHTMODE pin status Input Low Level Input High Level Module operation Flight Mode: RF is closed AT+CFUN=0: RF is closed AT+CFUN=1:RF is working 3.15 Other interface 3.15.1 Sink Current Source The ISINK pin is VBAT tolerant and intended to drive some passive devices, such as LCD backlight and white LED, etc. Its output current can be up to 40mA and be set by the AT command AT+ CLEDITST. Table 21: Sink current electronic characteristic Symbol Description VISINK IISINK Voltage tolerant Current tolerant Min. 0.5 0 Typ.
Max. VBAT 40 Unit V mA SIM7600NA-H_user manual _V1.00 46 2020-1-7 Smart Machine Smart Decision ISINK is a ground-referenced current sink. The following figure shows its reference circuit. Figure34: ISINK reference circuit Note: The sinking current can be adjusted to meet the design requirement through the AT command AT+ CLEDITST =<0>, <value>.The value ranges from 0 to 8, on behalf of the current from 0mA to 40mA by 5mA step. 3.15.2 ADC MODULE has 2 dedicated ADC pins named ADC1 and ADC2.They are available for digitizing analog signals such as battery voltage and so on. These electronic specifications are shown in the following table. Table 22: ADC1 and ADC2 electronic characteristics Min. Typ. Max. 0.1 1 15 442 1.7 Unit Bits ms V M Note: AT+CADC and AT+CADC2 can be used to read the voltage of the ADC1 and ADC2 pins, for more details, please refer to document [1]. Characteristics Resolution Conversion time Input Range Input serial resistance 3.15.3 LDO MODULE has a LDO power output, named VDD_AUX. its output voltage is 2.85V by default, Users can switch the LDO on or off by the AT command AT+CVAUXS and configure its output voltage by the AT command AT+CVAUXV. SIM7600NA-H_user manual _V1.00 47 2020-1-7 Smart Machine Smart Decision Table 23: Electronic characteristic Symbol Description VVDD_AUX Output voltage IO Output current Min. 1.7
Typ. 2.85
Max. 3.05 150 Unit V mA NoteFor more details of AT commands about VDD_AUX, please refer to document [1]. SIM7600NA-H_user manual _V1.00 48 2020-1-7 Smart Machine Smart Decision 4 RF Specifications 4.1 GSM/UMTS/LTE RF Specifications Table 24: Conducted transmission power Power 23dBm +/-2.7dB 23dBm +/-2.7dB 23dBm +/-2.7dB 23dBm +/-2.7dB 23dBm +/-2.7dB 23dBm +/-2.7dB 23dBm +/-2.7dB 23dBm +/-2.7dB 23dBm +/-2.7dB 23dBm +/-2.7dB 23dBm +/-2.7dB Min.
<-40dBm
<-40dBm
<-40dBm
<-40dBm
<-40dBm
<-40dBm
<-40dBm
<-40dBm
<-40dBm
<-40dBm
<-40dBm Frequency LTE-FDD B2 LTE-FDD B4 LTE-FDD B5 LTE-FDD B12 LTE-FDD B13 LTE-FDD B14 LTE-FDD B25 LTE-FDD B26 LTE-FDD B71 LTE-FDD B66 LTE-TDD B41 Table 25: Operating frequencies Frequency Receiving Transmission The LTE Operating frequencies are shown in the following table 26. Note: Operating frequencies of LTE TDD B41 for the MODULE is 200MHz BW, 24962690 MHz GPS
GLONASS BD 1574.4 1576.44 MHz 1598 1606 MHz 1559 1563 MHz
Table 26: E-UTRA operating bands E-UTRA Operating Band Uplink (UL) operating band Downlink (DL) operating band Duplex Mode 2 4 5 12 13 14 25 26 71 66 41 1850~1910 MHz 1930~1990 MHz 1710~1755MHz 824849 MHz 699~716MHz 777~787MHz 788~798MHz 2110~2155MHz 869894MHz 728~746MHz 746~757MHz 758~768MHz 1850~1915MHz 1930~1995MHz 814~849MHz 663~698MHz 859~894MHz 617~652MHz 1710~1780MHz 2110~2200MHz 2496~2690 MHz 2496~2690 MHz FDD FDD FDD FDD FDD FDD FDD FDD FDD FDD TDD SIM7600NA-H_user manual _V1.00 49 2020-1-7 Smart Machine Smart Decision Table 27: Conducted receive sensitivity Frequency LTE FDD/TDD Receive sensitivity(Typical) See table 28. Receive sensitivity(MAX) 3GPP Table 28: Reference sensitivity (QPSK) E-UTR 1.4 MHz 3 MHz 5 MHz 10 MHz 15 MHz 20 MHz Duplex A band Standard Standard Standard Standard Standard Standard Mode
-102.7
-99.7
-104.7
-101.7
-103.2
-100.2
-101.7
-98.7
-101.2
-102.7
-98.2
-99.7
-104.7
-101.7
-98
-100
-98
-97
-97
-97
-96.5
-97.5
-97.2
-100
-99
-95
-97
-95
-94
-94
-94
-93.5
-94.5
-94.2
-97
-96
-93.2
-95.2
-92
-94
-91.7
-92.7
-92
-95.2
-94.2
-90.5
-87.5
-94
-93 FDD FDD FDD FDD FDD FDD FDD FDD FDD FDD TDD 2 4 5 12 13 14 25 26 71 66 41 4.2 GSM /UMTS/LTE Antenna Design Guide Users should connect antennas to MODULEs antenna pads through micro-strip line or other types of RF trace and the trace impedance must be controlled in 50. SIMCom recommends that the total insertion loss between the antenna pads and antennas should meet the following requirements:
Table 29: Trace loss Frequency 700MHz-960MHz 1710MHz-2170MHz 2300MHz-2650MHz Loss
<0.5dB
<0.9dB
<1.2dB To facilitate the antenna tuning and certification test, a RF connector and an antenna matching circuit should be added. The following figure is the recommended circuit. SIM7600NA-H_user manual _V1.00 50 2020-1-7 Smart Machine Smart Decision Figure35: Antenna matching circuit (MAIN_ANT) In above figure, the components R1, C1, C2 and R2 are used for antenna matching, the values of components can only be achieved after the antenna tuning and usually provided by antenna vendor. By default, the R1, R2 are 0 resistors, and the C1, C2 are reserved for tuning. The component D1 is a TVS for ESD protection, and it is optional for users according to application environment. The RF test connector is used for the conducted RF performance test, and should be placed as close as to the MODULEs MAIN_ANT pin. The traces impedance between MODULE and antenna must be controlled in 50. Figure 276: Antenna matching circuit (AUX_ANT) In above figure, R3, C3, C4 and R4 are used for auxiliary antenna matching. By default, the R3, R4 are 0resistors, and the C3, C4 are reserved for tuning. D2 is a TVS for ESD protection, and it is optional for users according to application environment. Two TVS are recommended in the table below. SIM7600NA-H_user manual _V1.00 51 2020-1-7 Smart Machine Smart Decision Table 30: Recommended TVS Package Part Number 0201 0402 LXES03AAA1-154 LXES15AAA1-153 Vender Murata Murata NoteSIMCom suggests the LTE auxiliary antenna to be kept on, since there are many high bands in the designing of LTE-TDD, such as band38, band40 and band41. Because of the high insert loss of the RF cable and layout lines, the receiver sensitivity of these bands above will have risk to meet the authentication without the diversity antenna. For more details about auxiliary antenna design notice, please refer to document [25]. 4.3 GNSS MODULE merges GNSS (GPS/GLONASS/BD) satellite and network information to provide a high-availability solution that offers industry-leading accuracy and performance. This solution performs well, even in very challenging environmental conditions where conventional GNSS receivers fail, and provides a platform to enable wireless operators to address both location-based services and emergency mandates. 4.3.1 GNSS Technical specification Tracking sensitivity: -159 dBmGPS/-158 dBmGLONASS/-159 dBmBD Cold-start sensitivity: -148 dBm Accuracy (Open Sky): 2.5m (CEP50) TTFF (Open Sky) : Hot start <1s, Cold start<35s Receiver Type: 16-channel, C/A Code GPS L1 Frequency: 1575.421.023MHz GLONASS: 1597.5~1605.8 MHz BD: 1559.05~1563.14 MHz Update rate: Default 1 Hz GNSS data format: NMEA-0183 GNSS Current consumption : 100mA (GSM/UMTS/LTE Sleep ,in total on VBAT pins) GNSS antenna: Passive/Active antenna Note: If the antenna is active type, the power should be given by main board because there is no power supply on the GPS antenna pad. If the antenna is passive, it is suggested that the external LNA should be used. 4.3.2 GNSS Application Guide Users can adopt an active antenna or a passive antenna to MODULE. If using a passive antenna, an external LNA is a must to get better performance. The following figures are the reference circuits. SIM7600NA-H_user manual _V1.00 52 2020-1-7 Smart Machine Smart Decision Figure 287: Active antenna circuit Figure 298: Passive antenna circuit (Default) In above figures, the components C1, L1 and L2 are used for antenna matching. Usually, the values of the components can only be achieved after antenna tuning and usually provided by antenna vendor. C2 is used for DC blocking. L3 is the matching component of the external LNA, and the value of L3 is determined by the LNA characteristic and PCB layout. Both VDD of active antenna and V_LNA need external power supplies which should be considered according to active antenna and LNA characteristic. LDO/DCDC is recommended to get lower current consuming by shutting down active antennas and LNA when GNSS is not working. GNSS can be tested by NMEA port. NMEA sentences can be obtained through UART or USB automatically. NMEA sentences include GSV, GGA, RMC, GSA, and VTG. Before using GNSS, user should configure MODULE in proper operating mode by AT command. Please refer to related documents for details. MODULE can also get position location information through AT directly. Note: GNSS is closed by default and can be started by AT+CGPS. The AT command has two parameters, the first is on/off, and the second is GNSS mode. Default mode is standalone mode. AGPS mode needs more support from the mobile telecommunication network. Please refer to document [24] for more details. SIM7600NA-H_user manual _V1.00 53 2020-1-7 VIH VIL VOH VOL IOH IOL IIH IIL Smart Machine Smart Decision 5 Electrical Specifications 5.1 Absolute maximum ratings Table 31: Absolute maximum ratings Absolute maximum rating for digital and analog pins of MODULE are listed in the following table:
Parameter Voltage at VBAT Voltage at USB_VBUS Voltage at digital pins
(RESET,SPI,Keypad,GPIO,I2C,UART,PCM) Voltage at digital pins (SD,USIM) Voltage at PWRKEY Min.
-0.5
-0.5
-0.3
-0.3
-0.3 Typ.
Max. 6.0 5.85 2.1 3.05 1.8 Unit V V V V 5.2 Operating conditions Table 32: Recommended operating ratings Parameter Voltage at VBAT Voltage at USB_VBUS Min. 3.4 3.0 Typ. 3.8 5.0 Max. 4.2 5.25 Unit V V Table 33: 1.8V Digital I/O characteristics*
Parameter Description Max. Unit Min. 1.17
-0.3 1.35 0
High-level input voltage Low-level input voltage High-level output voltage Low-level output voltage High-level output current(no pull down resistor) Low-level output current(no pull up resistor) Input high leakage current (no pull down resistor) Input low leakage current(no pull up resistor)
-1 Typ. 1.8 0
2
-2
2.1 0.63 1.8 0.45
1
V V V V mA mA uA uA SIM7600NA-H_user manual _V1.00 54 2020-1-7 Smart Machine Smart Decision
*Note: These parameters are for digital interface pins, such as SPI, GPIOs (NETLIGHT, FLIGHTMODE, STATUS, USIM_DET, SD_DET), SDIO, I2C, UART, PCM, COEXn, and BOOT_CFG0. The operating temperature of MODULE is listed in the following table. Table 34: Operating temperature Parameter Normal operation temperature Extended operation temperature*
Storage temperature Min.
-30
-40
-45 Typ. 25 25 25 Max. 80 85
+90 Unit
*Note: Module is able to make and receive voice calls, data calls, SMS and make GSM/
UMTX/LTE traffic in -40 ~ +85. The performance will be reduced slightly from the 3GPP specifications if the temperature is outside the normal operating temperature range and still within the extreme operating temperature range. 5.3 Operating Mode 5.3.1 Operating Mode Definition Table 35: Operating mode Definition Mode Function The table below summarizes the various operating modes of MODULE product. n o i t a r e p o l a m r o N GSM /UMTS/LTE Sleep In this case, the current consumption of MODULE will be reduced to the minimal level and the MODULE can still receive paging message and SMS. GSM/UMTS/LTE Idle Software is active. Module is registered to the network, and the MODULE is ready to communicate. GSM/UMTS/LTE Talk GPRS/EDGE/
UMTS/LTE Standby Connection between two subscribers is in progress. In this case, the power consumption depends on network settings such as DTX off/on, FR/EFR/HR, hopping sequences, and antenna. Module is ready for data transmission, but no data is currently sent or received. In this case, power consumption depends on network settings. GPRS/EDGE/
UMTS/LTE Data transmission There is data transmission in progress. In this case, power consumption is related to network settings (e.g. power control level);
uplink/downlink data rates, etc. Minimum functionality mode AT command AT+CFUN=0 AT+CSCLK=1 can be used to set the MODULE to a minimum functionality mode without removing the power supply. In this mode, the RF part of the MODULE will not work and the USIM card will not be accessible, but the serial port and SIM7600NA-H_user manual _V1.00 55 2020-1-7 Smart Machine Smart Decision USB port are still accessible. The power consumption in this mode is lower than normal mode. AT command AT+CFUN=4 or pulling down the FLIGHTMODE pin can be used to set the MODULE to flight mode without removing the power supply. In this mode, the RF part of the MODULE will not work, but the serial port and USB port are still accessible. The power consumption in this mode is lower than normal mode. Module will go into power off mode by sending the AT command AT+CPOF or pull down the PWRKEY pin, normally. In this mode the power management unit shuts down the power supply, and software is not active. The serial port and USB are is not accessible. Flight mode Power off 5.3.2 Sleep mode In sleep mode, the current consumption of MODULE will be reduced to the minimal level, and MODULE can still receive paging message and SMS. Several hardware and software conditions must be satisfied together in order to let MODULE enter into sleep mode:
1. UART condition 2. USB condition 3. Software condition Note: Before designing, pay attention to how to realize sleeping/waking function and refer to Document [26] for more details. 5.3.3 Minimum functionality mode and Flight mode Minimum functionality mode ceases a majority function of MODULE, thus minimizing the power consumption. This mode is set by the AT command which provides a choice of the functionality levels. AT+CFUN=0: Minimum functionality AT+CFUN=1: Full functionality (Default) AT+CFUN=4: Flight mode If MODULE has been set to minimum functionality mode, the RF function and USIM card function will be closed. In this case, the serial port and USB are still accessible, but RF function and USIM card will be unavailable. If MODULE has been set to flight mode, the RF function will be closed. In this case, the serial port and USB are still accessible, but RF function will be unavailable. When MODULE is in minimum functionality or flight mode, it can return to full functionality by the AT command AT+CFUN=1. SIM7600NA-H_user manual _V1.00 56 2020-1-7 Smart Machine Smart Decision 5.4 Current Consumption The current consumption is listed in the table below. Table 36: Current consumption on VBAT Pins (VBAT=3.8V) GNSS GNSS supply current
(AT+CFUN=0,with USB connection) LTE sleep/idle mode LTE supply current
(GNSS offwithout USB connection) LTE data
@ -140dBmTracking Typical:TBD Sleep mode Typical: TBD Idle mode Typical: TBD
@5MHz 22.1dBm Typical: TBD
@10MHz 22.4dBm Typical: TBD
@20MHz 22.3dBm Typical: TBD
@5MHz 22.0dBm Typical: TBD
@10MHz 22.1dBm Typical: TBD
@20MHz 22.6dBm Typical: TBD
@5MHz 22.2dBm Typical: TBD
@10MHz 22.1dBm Typical: TBD
@5MHz 22.7dBm Typical: TBD
@10MHz 22.7dBm Typical: TBD
@5MHz 21.9dBm Typical: TBD
@10MHz 22.0dBm Typical: TBD
@5MHz 21.3dBm Typical: TBD
@10MHz 22.5dBm Typical: TBD
@15MHz 22.6dBm Typical: TBD
@5MHz 22dBm Typical: TBD
@10MHz 22dBm Typical: TBD
@20MHz 22dBm Typical: TBD
@5MHz 22.4dBm Typical: TBD
@10MHz 22.7dBm Typical: TBD
@15MHz 22.3dBm Typical: TBD
@5MHz 22.4dBm Typical: TBD
@10MHz 22.5dBm Typical: TBD
@20MHz 22.4dBm Typical: TBD
@5MHz 22dBm Typical: TBD
@10MHz 22dBm Typical: TBD
@20MHz 22dBm Typical: TBD
@5MHz 21.6dBm Typical: TBD
@10MHz 21.7dBm Typical: TBD
@20MHz 21.7dBm Typical: TBD LTE-FDD B2 LTE-FDD B4 LTE-FDD B5 LTE-FDD B12 LTE-FDD B13 LTE-FDD B14 LTE-FDD B25 LTE-FDD B26 LTE-FDD B71 LTE-FDD B66 LTE-TDD B41 5.5 ESD Notes MODULE is sensitive to ESD in the process of storage, transporting, and assembling. When MODULE is mounted on the users mother board, the ESD components should be placed beside SIM7600NA-H_user manual _V1.00 57 2020-1-7 Smart Machine Smart Decision the connectors which human body may touch, such as USIM card holder, audio jacks, switches, keys, etc. The following table shows the MODULE ESD measurement performance without any external ESD component. Table 37: The ESD performance measurement table (Temperature: 25, Humidity: 45%) Part VBAT,GND Antenna port Other PADs Contact discharge Air discharge TBD TBD TBD TBD TBD TBD SIM7600NA-H_user manual _V1.00 58 2020-1-7 Smart Machine Smart Decision 6 SMT Production Guide 6.1 Top and Bottom View of MODULE Figure 309: Top and bottom view of MODULE SIM7600NA-H_user manual _V1.00 59 2020-1-7 Smart Machine Smart Decision 6.2 Label Information Figure 40: Label information Table 38: The description of label information No. A B C D E Description LOGO Module part number Project name Serial number International mobile equipment identity 6.3 Typical SMT Reflow Profile SIMCom provides a typical soldering profile. Therefore the soldering profile shown below is only SIM7600NA-H_user manual _V1.00 60 2020-1-7 Smart Machine Smart Decision a generic recommendation and should be adjusted to the specific application and manufacturing constraints. Figure41: The ramp-soak-spike reflow profile of MODULE Note: For more details about secondary SMT, please refer to the document [21]. 6.4 Moisture Sensitivity Level (MSL) MODULE is qualified to Moisture Sensitivity Level (MSL) 3 in accordance with JEDEC J-STD-033. If the prescribed time limit is exceeded, users should bake MODULE for 192 hours in drying equipment (<5% RH) at 40+5/-0C, or 72 hours at 85+5/-5C. Note that plastic tray is not heat-resistant, and only can be baked at 45 C. Table 39: Moisture Sensitivity Level and Floor Life Moisture Sensitivity Level
(MSL) Floor Life (out of bag) at factory ambient30C/60% RH or as stated Unlimited at 30/85% RH 2a 1 2 3 4 5 5a 6 1 year 4 weeks 168 hours 72 hours 48 hours 24 hours Mandatory bake before use. After bake, it must be reflowed within the time limit specified on the label. NOTE: IPC / JEDEC J-STD-033 standard must be followed for production and storage. SIM7600NA-H_user manual _V1.00 61 2020-1-7 Smart Machine Smart Decision 6.5 Stencil Foil Design Recommendation The recommended thickness of stencil foil is more than 0.15mm. Figure 42 : Stencil Foil SIM7600NA-H_user manual _V1.00 62 2020-1-7 Smart Machine Smart Decision 7 Packaging MODULE support tray packaging. Figure43: packaging diagram Module tray drawing Figure 314: Tray drawing SIM7600NA-H_user manual _V1.00 63 2020-1-7 Smart Machine Smart Decision Table 40: Tray size Length3mm Width3mm 242.0 161.0 Number 15 Small carton drawing Figure 325: Small carton drawing Table 41: Small Carton size Length10mm Width10mm Height10mm 270 180 120 Number 15*20=300 Big carton drawing Figure 46: Big carton drawing Table 42: Big Carton size Length10mm Width10mm Height10mm Number SIM7600NA-H_user manual _V1.00 64 2020-1-7 Smart Machine Smart Decision 380 280 280 300*4=1200
. Coding Schemes and Maximum Net Data Rates over Air Interface Table 43: Coding Schemes and Maximum Net Data Rates over Air Interface LTE-FDD device category Max data ratepeak Modulation type LTE-FDD device category Max data ratepeak Modulation type 10Mbps 50Mbps 100Mbps 150Mbps 5Mbps 25Mbps 50Mbps 50Mbps QPSK/16QAM/64QAM QPSK/16QAM/64QAM QPSK/16QAM/64QAM QPSK/16QAM/64QAM QPSK/16QAM QPSK/16QAM QPSK/16QAM QPSK/16QAM
. Related Documents Table 44: Related Documents NO. Title Description SIM7500_SIM7600 Series_AT Command Manual_V1.xx ITU-T Draft new recommendationV.25ter AT Command Manual Serial asynchronous automatic dialing and control Digital cellular telecommunications (Phase 2+); AT command set for GSM Mobile Equipment (ME) Support GSM 07.10 multiplexing protocol Digital cellular telecommunications (Phase 2+); Use of Data Terminal Equipment Data Circuit terminating Equipment
(DTE DCE) interface for Short Message Service (SMS) and Cell Broadcast Service (CBS) Digital cellular telecommunications system (Phase 2+);
Specification of the Subscriber Identity Module Mobile Equipment (SIM ME) interface Digital cellular telecommunications system (Phase 2+);
the SIM Application Toolkit for SIM7600NA-H_user manual _V1.00 65 2020-1-7 Appendix
(Downlink) Category 1 Category 2 Category 3 Category 4
(Uplink) Category 1 Category 2 Category 3 Category 4
[1]
[2]
[3]
[4]
GSM 07.07 GSM 07.10
[5]
GSM 07.05
[6]
GSM 11.14
[7]
GSM 11.11 Smart Machine Smart Decision
[8]
GSM 03.38
[9]
GSM 11.10
[10]
3GPP TS 51.010-1
[11]
3GPP TS 34.124
[12]
3GPP TS 34.121
[13]
3GPP TS 34.123-1
[14]
3GPP TS 34.123-3
[15] EN 301 908-02 V2.2.1
[16] EN 301 489-24 V1.2.1 Specification of the Subscriber Identity Module Mobile Equipment (SIM ME) interface Digital cellular telecommunications system (Phase 2+);
Alphabets and language-specific information Digital cellular telecommunications system (Phase 2) Mobile Station (MS) conformance specification Part 1:
Conformance specification Digital cellular telecommunications system (Release 5);
Mobile Station (MS) conformance specification Electromagnetic Compatibility (EMC) for mobile terminals and ancillary equipment. Electromagnetic Compatibility (EMC) for mobile terminals and ancillary equipment. Technical Specification Group Radio Access Network;
Terminal conformance specification; Radio transmission and reception (FDD) User Equipment (UE) conformance specification; Part 3:
Abstract Test Suites. Electromagnetic compatibility and Radio spectrum Matters
(ERM); Base Stations (BS) and User Equipment (UE) for IMT-2000. Third Generation cellular networks; Part 2:
Harmonized EN for IMT-2000, CDMA Direct Spread
(UTRA FDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive Electromagnetic compatibility and Radio Spectrum Matters
(ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE) radio and ancillary equipment
[17]
IEC/EN60950-1(2001) Safety of information technology equipment (2000)
[18]
3GPP TS 51.010-1 Digital cellular telecommunications system (Release 5);
Mobile Station (MS) conformance specification
[19] GCF-CC V3.23.1 Global Certification Forum - Certification Criteria
[21] Module Module secondary SMT Guidelines Directive of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(RoHS) This document describes how to use UART interface of SIMCom modules.
[20]
2002/95/EC
[22]
[23]
[24]
secondary-SMT-UGD-V1.xx SIM7X00 Series_UART_Application Note_V1.xx SIM7100_SIM7500_SIM7600 Series_USB AUDIO_Application Note_V1.xx SIM7X00 Series_GPS_Application Note_V1.xx diversity receiver system
[25] Antenna design guidelines for Antenna design guidelines for diversity receiver system SIM7600NA-H_user manual _V1.00 66 2020-1-7 USB AUDIO Application Note GPS Application Note Smart Machine Smart Decision SIM7100_SIM7500_SIM7600 _Sleep Mode_Application Note_V1.xx 7600CE-LAN-Reference Design V1.0 SIM7600_Series_SGMII-Refe rence_Design_V1.00 Sleep Mode Application Note HSIC Application Note SGMII Reference Design
[26]
[27]
[28]
SIM7600NA-H_user manual _V1.00 67 2020-1-7 Smart Machine Smart Decision
. Terms and Abbreviations Table 45: Terms and Abbreviations Abbreviation ADC ARP BER BTS CS CSD CTS DAC DRX DSP DTE DTR DTX EFR EGSM EMC ESD ETS EVDO FCC FD FDMA FR GMSK GNSS GPRS GPS GSM HR HSPA I2C IMEI LTE MO MS MT NMEA PAP PBCCH PCB PCS Description Analog-to-Digital Converter Antenna Reference Point Bit Error Rate Base Transceiver Station Coding Scheme Circuit Switched Data Clear to Send Digital-to-Analog Converter Discontinuous Reception Digital Signal Processor Data Terminal Equipment (typically computer, terminal, printer) Data Terminal Ready Discontinuous Transmission Enhanced Full Rate Enhanced GSM Electromagnetic Compatibility Electrostatic Discharge European Telecommunication Standard Evolution Data Only Federal Communications Commission (U.S.) SIM fix dialing phonebook Frequency Division Multiple Access Full Rate Gaussian Minimum Shift Keying Global Navigation Satellite System General Packet Radio Service Global Positioning System Global Standard for Mobile Communications Half Rate High Speed Packet Access Inter-Integrated Circuit International Mobile Equipment Identity Long Term Evolution Mobile Originated Mobile Station (GSM engine), also referred to as TE Mobile Terminated National Marine Electronics Association Password Authentication Protocol Packet Switched Broadcast Control Channel Printed Circuit Board Personal Communication System, also referred to as GSM 1900 SIM7600NA-H_user manual _V1.00 68 2020-1-7 Smart Machine Smart Decision RF RMS RTC SIM SMS SPI SMPS TDMA TE TX UART VSWR SM NC EDGE HSDPA HSUPA ZIF WCDMA VCTCXO USIM UMTS UART Radio Frequency Root Mean Square (value) Real Time Clock Subscriber Identification Module Short Message Service serial peripheral interface Switched-mode power supply Time Division Multiple Access Terminal Equipment, also referred to as DTE Transmit Direction Universal Asynchronous Receiver & Transmitter Voltage Standing Wave Ratio SIM phonebook Not connect Enhanced data rates for GSM evolution High Speed Downlink Packet Access High Speed Uplink Packet Access Zero intermediate frequency Wideband Code Division Multiple Access Voltage control temperature-compensated crystal oscillator Universal subscriber identity module Universal mobile telecommunications system Universal asynchronous receiver transmitter SIM7600NA-H_user manual _V1.00 69 2020-1-7 Smart Machine Smart Decision
. Safety Caution Table 46: Safety Caution Marks Requirements When in a hospital or other health care facility, observe the restrictions about the use of mobiles. Switch the cellular terminal or mobile off, medical equipment may be sensitive and not operate normally due to RF energy interference. Switch off the cellular terminal or mobile before boarding an aircraft. Make sure it is switched off. The operation of wireless appliances in an aircraft is forbidden to prevent interference with communication systems. Forgetting to think much of these instructions may impact the flight safety, or offend local legal action, or both. Do not operate the cellular terminal or mobile in the presence of flammable gases or fumes. Switch off the cellular terminal when you are near petrol stations, fuel depots, chemical plants or where blasting operations are in progress. Operation of any electrical equipment in potentially explosive atmospheres can constitute a safety hazard. Your cellular terminal or mobile receives and transmits radio frequency energy while switched on. RF interference can occur if it is used close to TV sets, radios, computers or other electric equipment. Road safety comes first! Do not use a hand-held cellular terminal or mobile when driving a vehicle, unless it is securely mounted in a holder for hands free operation. Before making a call with a hand-held terminal or mobile, park the vehicle. GSM cellular terminals or mobiles operate over radio frequency signals and cellular networks and cannot be guaranteed to connect in all conditions, especially with a mobile fee or an invalid SIM card. While you are in this condition and need emergent help, please remember to use emergency calls. In order to make or receive calls, the cellular terminal or mobile must be switched on and in a service area with adequate cellular signal strength. Some networks do not allow for emergency call if certain network services or phone features are in use (e.g. lock functions, fixed dialing etc.). You may have to deactivate those features before you can make an emergency call. Also, some networks require that a valid SIM card be properly inserted in the cellular terminal or mobile. SIM7600NA-H_user manual _V1.00 70 2020-1-7 Smart Machine Smart Decision Contact us:
Shanghai SIMCom Wireless Solutions Ltd. Add: SIM Technology Building, No.633, Jinzhong Road, Changning District, Shanghai P.R. China 200335 Tel+86 21 3157 5100\3157 5200 URLwww.simcom.com SIM7600NA-H_user manual _V1.00 71 2020-1-7 Antenna requirements 1. Antenna List:
Type: Dipole antenna with non-standard SMA connector(50ohm);
Model: MF25D Antenna Gain:
Band2:1.87dBi, Band4:3.12dBi, Band5:0.91dBi, Band12:0.95dBi, Band13:2.23dBi, Band25:1.87dBi, Band26:1.40dBi, Band41:3.20dBi, Band66:3.12dBi, Band71:-0.48dBi 2. The user must match the MF25D antenna with the non-standard SMA connector and cannot change the antenna. This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-
product for any additional compliance requirements required with this module installed. Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes:
(Pour utilisation de dispositif module) 1) L'antenne doit tre installe de telle sorte qu'une distance de 20 cm est respecte entre l'antenne et les utilisateurs, et 2) Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplmentaires sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformit supplmentaires requis pour ce module install. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The modular can be installed or integrated in mobile or fix devices only. This modular cannot be installed in any portable device. FCC Radiation Exposure Statement This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This modular must be installed and operated with a minimum distance of 20 cm between the radiator and user body. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: 2AJYU-8PYA005 Or Contains FCC ID: 2AJYU-8PYA005 When the module is installed inside another device, the user manual of the host must contain below warning statements;
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any company of the host device which install this modular with limit modular approval should perform the test of radiated emissionand spurious emission according to FCC Part 22H and 24E, 47 CFR Part 2, 22H, 24(E), 27 and 47 CFR Part 2, 22H, 24(E), 27, 90 requirement,Only if the test result comply with FCC Part 22H and 24E, 47 CFR Part 2, 22H, 24(E), 27 and 47 CFR Part 2,22H, 24(E), 27, 90 requirement, then the host can be sold legally. IC Warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. The modular can be installed or integrated in mobile or fix devices only. This modular cannot be installed in any portable device. IC Radiation Exposure Statement This modular complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This modular must be installed and operated with a minimum distance of 20 cm between the radiator and user body. For a host manufacture's using a certified modular, if (1) the module's IC number is not visible when installed in the host, or (2) if the host is marketed so that end users do not have straightforward commonly used methods for access to remove the module so that the IC number of the module is visible; then an additional permanent label referring to the enclosed module: "Contains Transmitter Module IC: " 23761-
8PYA006" or "Contains IC: 23761-8PYA006" must be used. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement Le modular peut tre install ou intgr dans un mobile ou rparer une seule chose Installation dans nimporte quel appareil portable. Dclaration de rayonnement IC Ce modular complies avec des radiations mettrices de rayonnement Environnement. Ceci ne doit pas tre co-localis ou oprer avec des autres Ce modular doit tre install et obtenu avec une distance minimale de 20 cm entre les radiateurs et le corps de lutilisateur. Pour un hte, on utilise un modular, si (1) le numro de module est non visible Quand on est install dans le serveur, or (2) si le propritaire est commercialis Straightforward commonly used for the access to remove travail so that the number IC en vue Le module est visible; Ensuite, le label permanent a t attribu au module:
"Contient le Module IC:" 23761-8PYA006" ou "contenu IC: 23761-8PYA006" doit" be use
| 1 | Label | ID Label/Location Info | 362.55 KiB | July 29 2020 |
= ia J i ses BEER EEG
@eec
ee, SIMZ600NA
=F TTT. Tt. P/N:S2-XXXXX-XXXXX SN:XXXXXXXKXKXKXKKXKXKK IMEI:X XXXXXKK FCC ID:2AJYU-8PYA005 1C:23761-8PYA006
- - . 7 . ' S| . 7 7
| 1 | Agent Authorization Letter | Cover Letter(s) | 8.21 KiB | July 29 2020 |
SIMCom Wireless Solutions Limited 2020.07.22 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:
We, SIMCom Wireless Solutions Limited hereby authorize (Shenzhen STS Test Services Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Name: yongsheng Li Signature:
Title:Manager Telephone: +86 21 32523134 E-mail: yongsheng.li@sim.com TCBJ FORM-4 Issued by: TCB Administrator Revision 6 12/06/10
| 1 | Differences Description | Cover Letter(s) | 80.25 KiB | July 29 2020 |
Differences Description We SIMCom Wireless Solutions Limited state:
Product LTE /GNSS MODULE Model Name SIM7600NA-H, SIM7600NA-H miniPCIE Trade Name: SIMCom FCC ID: 2AJYU-8PYA005 The electrical circuit design, layout, components used and internal wiring for above models are identical, only different in model name and appearance. Signatory Date 2020-07-22 Signature Name: yongsheng Li Title: Manager Company: SIMCom Wireless Solutions Limited Address: Bldg.B, SIM Technology Bldg.,No.633, Jinzhong Rd, Changing Dist., Shanghai, P.R.China
| 1 | Long term Confidentiality Letter | Cover Letter(s) | 16.10 KiB | July 29 2020 |
SIMCom Wireless Solutions Limited 2020.07.22 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (LTE /GNSS MODULE / SIM7600NA-H, SIM7600NA-H miniPCIE /FCC ID: 2AJYU-8PYA005) To Whom It May Concern:
This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. required to be submitted with this application be permanently withheld from public review. Please contact me if there is any information you may need. Sincerely, Name: yongsheng Li Schematics Block diagram Operation description Part List Tune Up Procedure Signature:
Title: Manager Telephone: +86 21 32523134 E-mail: yongsheng.li@sim.com TCBJ FORM-4 Issued by: TCB Administrator Revision 6 12/06/10
| 1 | Single modular app letter | Cover Letter(s) | 158.04 KiB | July 29 2020 |
Single Modular approval Declaration letter We ,apply Single modular approval for Product Name: LTE /GNSS MODULE Model: SIM7600NA-H, SIM7600NA-H miniPCIE FCC ID: 2AJYU-8PYA005 According to 996369 D01 Module Equip Auth Guide v01r04 and 15.212 requirement:
1) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must beon the module assembly;
Answer Yeswith shielded 2)The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal;
Answer Yes All inputs to the modules are buffered through logic or microprocessor inputs. 3)The modular transmitter must have its own power supply regulation. Answer Yes A low drop out regulator is used for modular power supply regulation. 4)The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b);
Answer Yes Device is equipped with Dipole antenna.
(5)The module must demonstrate compliance in a stand-alone configuration;
Answer Yesdistance between modular and all AEs are longer than 20cm refer to setup photo.
(6) The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements);
Answer Yes The modular has a permanent fixed label, and below statement was listed in the User Manual;The host device must be labeled to display the FCC ID of the module Contains FCC ID: 2AJYU-8PYA005
(7)The module must comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee;
Answer Yes The module comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee, Refer to test report and user manual .
(8)The module must comply with RF exposure requirements Answer Yes Transmitter meets MPE calculation of 47 CFR 1.1307 . Refer to MPEReports and Refer to modular installation manual Sincerely, Name: yongsheng Li Signature:
Title: Manager Telephone: +86 21 32523134 E-mail: yongsheng.li@sim.com
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2020-07-29 | 2498.5 ~ 2687.5 | PCB - PCS Licensed Transmitter | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2020-07-29
|
||||
| 1 | Applicant's complete, legal business name |
SIMCom Wireless Solutions Limited
|
||||
| 1 | FCC Registration Number (FRN) |
0025948449
|
||||
| 1 | Physical Address |
No.633 Jinzhong Road, Shanghai
|
||||
| 1 |
Shanghai, N/A
|
|||||
| 1 |
China
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
J******@metlabs.com
|
||||
| 1 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
2AJYU
|
||||
| 1 | Equipment Product Code |
8PYA005
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
Y****** L******
|
||||
| 1 | Title |
Manage
|
||||
| 1 | Telephone Number |
+86 2********
|
||||
| 1 | Fax Number |
+86 2********
|
||||
| 1 |
y******@simcom.com
|
|||||
| app s | Technical Contact | |||||
| 1 | Firm Name |
Shenzhen STS Test Services Co., Ltd.
|
||||
| 1 | Name |
B******** Y******
|
||||
| 1 | Physical Address |
A 1/F, Bldg B, Zhuoke Science Park, No.190
|
||||
| 1 |
Baoan District, Shenzhen, Guangdong
|
|||||
| 1 |
China
|
|||||
| 1 | Telephone Number |
86-07********
|
||||
| 1 | Fax Number |
86-07********
|
||||
| 1 |
b******@stsapp.com
|
|||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | PCB - PCS Licensed Transmitter | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LTE /GNSS MODULE | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Single Modular Approval | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Single Modular Approval. Output power listed is ERP for frequencies below 1 GHz and EIRP for frequencies above 1 GHz. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for the operations described in this filing. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For mobile and fixed operating configurations the antenna circuit matching , antenna gain, including cable loss, must not exceed 0.91 dBi at 850 MHz, 3.12 dBi at 1700 MHz and 1.87 dBi at 1900 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22, 1W eirp Part 27 and 2W eirp Part 24 power limits. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
SHENZHEN STS TEST SERVICES CO.,LTD.
|
||||
| 1 | Name |
B******** Y******
|
||||
| 1 | Telephone Number |
+86 7********
|
||||
| 1 |
B******@stsapp.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 27 | 699.7 | 715.3 | 0.173 | 0.05 ppm | 9M79G7D | ||||||||||||||||||||||||||||||||||
| 1 | 2 | 27 | 699.7 | 715.3 | 0.16 | 0.051 ppm | 9M72W7D | ||||||||||||||||||||||||||||||||||
| 1 | 3 | 27 | 779.5 | 784.5 | 0.128 | 0.04 ppm | 9M68G7D | ||||||||||||||||||||||||||||||||||
| 1 | 4 | 27 | 779.5 | 784.5 | 0.121 | 0.049 ppm | 9M57W7D | ||||||||||||||||||||||||||||||||||
| 1 | 5 | 27 | 790.5 | 795.5 | 0.117 | 0.047 ppm | 9M72G7D | ||||||||||||||||||||||||||||||||||
| 1 | 6 | 27 | 790.5 | 795.5 | 0.109 | 0.05 ppm | 9M64W7D | ||||||||||||||||||||||||||||||||||
| 1 | 7 | 24E | 1850.7 | 1914.3 | 0.13 | 0.019 ppm | 19M6G7D | ||||||||||||||||||||||||||||||||||
| 1 | 8 | 24E | 1850.7 | 1914.3 | 0.122 | 0.019 ppm | 19M3W7D | ||||||||||||||||||||||||||||||||||
| 1 | 9 | 22H | 824.7 | 848.3 | 0.222 | 0.019 ppm | 14M8G7D | ||||||||||||||||||||||||||||||||||
| 1 | 1 | 22H | 824.7 | 848.3 | 0.209 | 0.021 ppm | 14M7W7D | ||||||||||||||||||||||||||||||||||
| 1 | 11 | 9 | 814.7 | 823.3 | 0.221 | 0.021 ppm | 9M74G7D | ||||||||||||||||||||||||||||||||||
| 1 | 12 | 9 | 814.7 | 823.3 | 0.21 | 0.019 ppm | 9M63W7D | ||||||||||||||||||||||||||||||||||
| 1 | 13 | 27 | 2498.5 | 2687.5 | 0.201 | 0.013 ppm | 19M6G7D | ||||||||||||||||||||||||||||||||||
| 1 | 14 | 27 | 2498.5 | 2687.5 | 0.187 | 0.014 ppm | 21M2W7D | ||||||||||||||||||||||||||||||||||
| 1 | 15 | 27 | 1710.7 | 1779.3 | 0.144 | 0.019 ppm | 19M2G7D | ||||||||||||||||||||||||||||||||||
| 1 | 16 | 27 | 1710.7 | 1779.3 | 0.138 | 0.021 ppm | 19M3W7D | ||||||||||||||||||||||||||||||||||
| 1 | 17 | 27 | 665.5 | 695.5 | 0.11 | 0.05 ppm | 19M3G7D | ||||||||||||||||||||||||||||||||||
| 1 | 18 | 27 | 665.5 | 695.5 | 0.108 | 0.048 ppm | 19M2W7D | ||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC