FCC ID: RS2SXVRBT2 Satellite Radio with FM Transmitter and Bluetooth

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6804089.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case e r e H t r a t S 1 Find a Location for the Roady BT Display and Mount it 2 Mount the Magnetic Mount Antenna 5 Verify Signal Reception Select either the Dash Mount method or the Vent Mount method for mounting the Roady BT, or, if there is a metal surface in the vehicle, the Magnet can be attached directly to the metal surface without using the Dash or Vent Mount. Other magnetic type mounts may also be purchased separately from other vendors. Dash Mount Method:

Vent Mount Method:

A. Mount the Magnetic Mount Antenna outside your vehicle, on a clean and dry horizontal surface that will always face the sky. B. Choose the location for the antenna according to your type of vehicle. Center it between the left and right sides, and away from other antennas. IMPORTANT: The air temperature needs to be at least 60F to install the Dash Mount. If needed, turn on the heater in your vehicle. A. Select a flat surface for the Dash Mount with ample room for the Roady BT display. Avoid mounting on leather surfaces. Choose a location that doesnt interfere with the drivers vision or access to driving controls, one that wont interfere with the deployment of airbags or other safety equipment, and makes the Roady BT display easily accessible for operation. (Airbag locations are typically marked with SRS logos.) 1 1 2 A. Select a vent with ample room for the Roady BT display, one that wont interfere with the deployment of airbags or other safety equipment, and makes the Roady BT display easily accessible for operation.

(Airbag locations are typically marked with SRS logos.) B. Orient the adhesive foot so that Roady BT is easily accessible. Loosen the knob and adjust the adhesive foot to position 1, 2, or 3, and then tighten it. Knob Adhesive Foot Option 1 Option 2 Option 3 Vent Mount Rear View Slide Left Clamp to Hole in Center Pull Clamp Out Towards You Insert Round End of the Extended Clamp in the Center Hole Slide Clamp to Left to Complete Installation Repeat to Replace Right Clamp 3 B. Some vents have recessed louvers. If yours are recessed, remove the regular vent clamps and install the extended vent clamps. C. You can tilt the Dash Mount in your preferred direction. Mounting Surface for Magnet D. Remove the adhesive liner from the back of the Magnet and adhere the adhesive side of the Magnet to the Dash Mount. E. Clean the mounting surface in the vehicle with the alcohol preparation pad and let it dry thoroughly. F. Once the surface is dry, remove the adhesive liner from the Dash Mount. Press and hold the Dash Mount in place for 30 seconds. Allow the adhesive to cure for 2-4 hours. G. Attach the Roady BT Display to the magnet on the Dash Mount. Round End Orientation C. Remove the adhesive liner from the back of the Magnet and adhere the adhesive side of the Magnet to the Vent Mount. D. Install the Vent Mount onto the vehicle vent. i. Insert the vent mount into the vent opening. ii. Push until hooked on the rear of the vent louver. Rest the foot against the bottom of the vent. iii. If necessary, adjust the tilt of the Vent Mount by repositioning the foot to a different tilt adjustment hole. I Dash PUSH FOOT Vent Louver II Dash HOOKED Vent III Dash Vent TILT ADJUSTMENT HOLES E. Attach the Roady BT Display to the magnet on the Vent Mount. Sedans and Coupes

(above front windshield or rear window) Pickups

(above front windshield) Convertibles

(leading edge of trunk) SUVs

(rear of roof) TIP: Use the Alcohol Prep Pad to clean the surface. 3 Route the Antenna Cable NOTE: These instructions are for a sedan or coupe where the antenna is mounted above the front windshield. The Roady BT User Guide has detailed antenna cable routing instructions for all types of vehicles. Go to www.siriusxm.com/guides for the User Guide. Intelligent Power Adapter Location A. Tuck the antenna cable under the rubber molding around the glass and run it to the nearest corner. B. Route the cable out of the molding and into the rubber weather stripping around the door opening. C. Lift the weather stripping. Tuck and run the cable inside it to the bottom of the door opening. Replace the weather stripping. D. Pull the cable out and route it to the Roady BT Intelligent Power Adapter. AUDIO FM ANT E. Plug the Magnetic Mount Antenna connector into the ANT connector on the Intelligent Power Adapter. TIP: Include enough slack in your routing to accommodate open doors or the hood lid. Coil any excess cable in a hidden location and keep it away from any vehicle pedals or controls. 4 Connect the Intelligent Power Adapter A. Connect one end of the Display Cable to the Intelligent Power Adapter and the other end to the Roady BT display. B. Insert the Intelligent Power Adapter into your vehicles cigarette lighter or power adapter socket. C. Roady BT should power on automatically. If not, press the Power button on Roady BT to turn it on. A. Be sure the vehicle is outside and the antenna has a clear view of the sky. B. Verify that you are receiving the XM signal. The Roady BT Radio should be tuned to XM channel 1, the XM Preview channel. There should at least be two bars in the upper right corner of the Now Playing screen that denotes antenna signal strength. If not, be sure that you have mounted the antenna on the outside of the vehicle, as shown in step 2, and that the vehicle is parked outdoors with a clear view of the sky. Move the vehicle away from any obstructed area, for example, if you are parked in a garage, or parked near a large structure. C. You can also press the Menu button and then press to scroll to and highlight Signal Indicator. Press the Select button. The Satellite and Terrestrial bars show the strength of the signal being received. If the signal reception is good, press and hold the Menu button to return to XM channel 1, the XM Preview channel. 6 Connect the Audio Decide on one of the in-box audio connection options, Aux or Bluetooth, or you can connect the audio using an FM Direct Adapter (FMDA25) (sold separately, professional installation recommended). Refer to the three following sections for each audio option installation. Note that initially no audio connection option is selected for Roady BT. For each of the following audio connection options you will first need to select the desired audio option before the SiriusXM audio can be heard. Aux: Best: Connect the audio using the provided Aux Audio Cable if your vehicles radio/headunit has an auxiliary input jack. A. Plug one end of the Aux Audio Cable into the AUDIO connector of the Intelligent Power Adapter and the other end into the auxiliary input (Aux or Audio) jack in the vehicle. B. Turn on your vehicles radio/headunit and set it to play from the A U X auxiliary input source. AUDIO FM ANT C. Press the Menu button on Roady BT and then, press to highlight Audio Settings and press Select. D. Audio Output will be highlighted. Press the Select button until AUX is shown as the selected audio output. E. Wait a moment while the Aux audio is enabled and then you should hear channel 1 playing through the radio/headunit. TIP! Refer to your vehicle owners manual to find the location of the auxiliary input jack, or consult the vehicle dealer. Bluetooth: Best: Connect the audio using Bluetooth if your vehicles radio/headunit supports Bluetooth. Note that Roady BT is only compatible with radios and headunits which support the Bluetooth audio streaming protocol. If the vehicle radio/headunit only supports the Bluetooth phone protocol, Bluetooth cannot be used for the Roady BT audio connection. A. Temporarily turn off Bluetooth capability in any devices that you may have with you during the installation, such as a cellphone, to avoid other devices connecting to the vehicles radio/headunit instead of Roady BT. B. Place the vehicles radio/headunit in Bluetooth pairing mode. Refer to the vehicle owners manual for instructions on how to do this. C. Press the Menu button on Roady BT and then, press to highlight Audio Settings and press the Select button. D. Audio Output will be highlighted. Press the Select button until Bluetooth is shown as the selected audio output, and then wait a moment while Bluetooth is enabled. E. Press to highlight Bluetooth Settings and press the Select button. 6 7 offers for activation Scan here QUICK START GUIDE Self installation instructions and tips are provided for your convenience. It is your responsibility to determine if you have the knowledge, skills and physical ability required to properly perform an installation. SiriusXM shall have no liability for damage or injury resulting from the installation or use of any SiriusXM or third party products. It is your responsibility to ensure that all products are installed in adherence with local laws and regulations and in such a manner as to allow a vehicle to be operated safely and without distraction. SiriusXM product warranties do not cover the installation, removal or reinstallation of any product. Sirius XM Radio Inc. 1221 Avenue of the Americas, 36th Floor New York, NY 10020 siriusxm.com 1.866.635.2349 2022 Sirius XM Radio Inc. SXVRBT1QSG 220120a 6 Connect the Audio (continued) 7 Subscribe F. Add New Bluetooth Device will be highlighted. Press the Select button. G. The Pair Bluetooth Device message is displayed. Verify that the vehicles radio/headunit is on, is discoverable and in pairing mode and press the Select button to continue. H. Wait as Roady BT searches for discoverable Bluetooth devices. When the vehicles radio/headunit is shown in the list, press to highlight the name and press the Select button. (If you dont know the Bluetooth name of the radio/headunit, refer to the vehicle owners manual for the name.) I. Roady BT will begin pairing and when connected will display a Successfully Connected message. Wait a moment until you hear channel 1 playing through the radio/headunit. J. Press the Select button. Press and hold the Menu button to exit to the Now Playing screen. If Roady BT was unsuccessful in pairing and connecting, a different Bluetooth pairing and connecting method may necessary for this vehicles radio/headunit. Please refer to the Roady BT User Guide for additional pairing and connecting methods (siriusxm.com/guides), and also the Roady BT FAQs for the very latest Bluetooth tips and information. FM: Good: Connect the audio using the FM feature of Roady BT to play the audio through your vehicles FM radio. A. Purchase an FM Direct Adapter (FMDA25) and follow the instructions included with the FM Direct Adapter and install the FMDA25. AUDIO FM ANT B. Connect the FM cable from the FMDA25 to the FM connector on the Intelligent Power Adapter. C. Press the Menu button on Roady BT and then, press to highlight Audio Settings and press the Select button. D. Audio Output will be highlighted. Press the Select button until FM is shown as the selected audio output and wait a moment while the FM audio is enabled. E. Set Roady BT to transmit on the same FM channel that you have selected on your vehicles FM radio:

i. Press the Menu button on Roady BT and then press to scroll to and highlight Audio Settings and press the Select button. ii. Press iii. Press iv. Press to scroll to and highlight FM Channels and press the Select button. to scroll to and highlight FM2. Press the Select button. and to tune in steps of .2, or press and to tune in steps of 1 to select the available FM channel you have chosen. Press the Select button to select the FM channel. vi. The selected FM channel will be confirmed on the display screen. Press and hold the Menu button to return to the Now Playing screen. 99.3 1 2 3 4 5 6 7 8 9 0 99.3 You can follow either the general activation and subscription process or use the on-board activation guide to activate your Roady BT and subscribe to the SiriusXM service. General Activation and Subscription Process:

A. Make sure Roady BT is turned on, receiving the XM signal, and tuned to XM Preview channel 1 so that you can hear SiriusXM audio. B. Make a note of your SiriusXM Radio ID. You can find it by selecting Radio ID in menu items, by tuning to channel 0, on a label on the bottom of the gift box, and on the label on the Intelligent Power Adapter. NOTE! The SiriusXM Radio ID does not use the letters I, O, S, or F. C. To subscribe:

Online: Go to www.siriusxm.com/activatenow to access or set up an online account, subscribe to the service, and activate your Radio. OR By phone: Call 1-866-587-4225. Activation usually takes 10 to 15 minutes after you have completed the subscription process, but may take up to an hour. We recommend that your Radio remain on until subscribed. Once subscribed, the Radio will receive and you can tune to the channels in your subscription plan. Press to browse the different categories of channels. Learn what all the Roady BT buttons do in the panel below. to tune to other channels, and or or Activation Guide:

For your convenience, Roady BT has an on-board activation guide. You can activate your radio and subscribe to the XM service by using this guide, where you will be guided step-by-step through the subscription process. To access and use the guide, simply follow these steps:

A. Turn Roady BT on and press the Menu button. B. Activate Radio will be highlighted. Press the Select button. C. Follow the directions on each successive screen until you complete the subscription process. Roady BT Button Functions Day/Night Brightness Button Press to toggle between day and night brightness setting; press and hold to enter display settings in the Menu. Up and Down Buttons Press to navigate up/down through channels, menus, and lists; press and hold to scroll continuously. Power Button Press to turn Roady BT on and off. Menu Button Press to access advanced features and configuration options; when in configuration options, press and hold to return to the Now Playing screen. Select Button Press to confirm selection of highlighted item in a menu or list; press and hold to set a Song, Artist, or Game Alert at the Now Playing screen. Left and Right Buttons Press to search for channels by category. Bank/Direct Tune Button Press to toggle between favorite banks A & B; press and hold to enter Direct Tune and enter a channel number to tune. Play/Pause, Rewind, Fast-Forward Buttons Play/Pause: Press to pause or resume playing the channel; press and hold to jump to live. Rewind: Press to skip back to the beginning of the song/segment; press and hold to continuously skip back. Fast-Forward: Press to skip forward when listening behind live broadcast; press and hold to continuously skip forward when listening behind live broadcast. MATCH FM CHANNELS 1 2 3 4 5 6 7 8 9 0 F. You should hear channel 1 playing through the vehicles FM radio. If you are not satisfied with the audio quality, try a different FM channel. TIP! You may find an FM channel with static or silence on the vehicles FM radio that does not work with Roady BT. It is possible that some type of inaudible interference is present that prevents reception of the SiriusXM broadcast. The options are to use another FM channel or a different audio connection method. Number Buttons Press to tune to a stored favorite channel; press and hold to store a favorite channel. Also used to enter channel numbers when the Direct button is pressed. Jump Button Press to go back to the previous channel to which you were listening. Roady BT Now Playing Screen Channel Logo Audio Source (Bluetooth, Aux, FM) When listening to a channel, information about the channel and what is currently playing is displayed on the Now Playing screen. Channel Number Favorite Channel Artist or Show Name or Talk Show Host Or Sports Teams/Score Song Name or Talk Show Schedule Or Game Time/Details Content/Channel Information Channel Category Signal Strength Album Art Replay Timeline TuneStart (or mute) Indicator Current Favorite Bank

*The phone number shown above may differ from the one shown on Roady BT. All numbers are valid. The Roady BT User Guide is available at:

www.siriusxm.com/guides. Specifications System Power Requirements:

Operating Temperature:

Audio Output:

9-16 V DC,500 mA (max)

-4F to +140F (-20C to +60C) 1.0 Vrms (max) Roady BT Display Dimensions:

Weight:

Intelligent Power Adapter Dimensions:

Weight:

Input / Output:

Audio Connector:

5.0 in (W) x 2.7 in (H) x 0.64 in (D) 128 mm (W) x 68 mm (H) x 16.35 mm (D) 4.1 oz (117 g) 3.7 in (W) x 2.1 in (H) x 1.2 in (D) 94 mm (W) x 54 mm (H) x 31 mm (D) 1.9 oz (57 g) 9-16 V DC / 5 V DC, 1.0 A 1/8 in (3.5 mm) female Antenna Connector:

FM Connector:

SMB male 3/32 in (2.5 mm) female Vehicle Antenna Type:

Connector:

Cable Length:

Aux Audio Cable Connectors:

Cable Length:

Display Cable Connectors:

Cable Length:

SiriusXM Magnetic Mount SMB female, right angle Approximately 23 ft (7.0 m) 1/8 in (3.5 mm) stereo male to 1/8 in (3.5 mm) stereo male Approximately 4 ft (1.2 m) USB Micro-B male to male Approximately 6 ft (1.8 m)

Important Legal Information

Whats in the Box?

CAUTION: Do not attempt to install, activate, or adjust any of the setting options described in this Quick Start Guide unless your vehicle is parked in a safe location. 1 2 3 4 5 6 7 8 9 0 Roady BT Display Intelligent Power Adapter Vent Mount and Extended Vent Clamps Dash Mount Magnetic Adapter Extra Adhesive Antenna & Dash Mount Alcohol Preparation Pads Display Cable Aux Audio Cable Magnetic Mount Antenna

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6804090.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case USER GUIDE Scan here for activation offers Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety and Care Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Whats in the Box? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Roady BT Button Functions and Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Step 1: Choose a Location for Your Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Step 2: Install the Dash or Vent Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Step 3: Mount the Magnetic Mount Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 13 Step 4: Route the Antenna Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Step 5: Connect the Magnetic Mount Antenna and Display Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Step 6: Connect the Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 General Activation and Subscription . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 On-Board Activation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Using Your Roady BT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Navigation Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Now Playing Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Returning to the Now Playing Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Tuning to a Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Jump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Direct Tune . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Categories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Favorite Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Pause & Replay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Song/Artist Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Game Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 My Sports Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 xL Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Day/Night Brightness Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Night Comfort Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 TuneStart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Configuring Your Roady BT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Radio ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Online Product Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Channel Browsing/Tuning Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Feature Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 xL Lock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Signal Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Auto Shut Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Factory Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Demo Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Patent and Environmental Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 FCC Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Copyrights and Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 2 Roady BT User Guide Introduction Features Thank you for purchasing Roady BT!

SiriusXM Roady BT has these exciting features to enhance your overall listening experience:

Hear SiriusXM through your existing vehicle stereo with easy, do-it-yourself installation1 Very neat installation - only a single wire solution from the Display Control Unit (DCU) to the Intelligent Power Adapter (IPA) Newly designed magnetic mounting solution for the display (DCU) using the in-box vent and dash mounts, or other aftermarket mounting solutions (purchased separately) Antenna, and optional AUX or FM cable connections, are made to the IPA Bluetooth audio streaming to in-vehicle audio systems AUX and FM audio connection options (FM requires the use of the SiriusXM FM Direct Adapter sold separately) View artist or show name, song or program title and content or channel information on an easy-

to-read large high-resolution full color display Single button access to day or night screen brightness setting Store up to 20 of your favorite channels for one touch access Song, Artist, and Game Alerts (up to 50) Pause, Rewind, and Replay of the current channel (live broadcast and smart favorite channels) Easily lock and unlock channels with mature content Browse whats playing on other channels while listening to the current one One-Touch Jump to the previous channel to which you were listening Listen in multiple vehicles, at home, in the office or outdoors - all with just one subscription Compatible with the SiriusXM Remote Control 2 .0 Works on the XM network and receives all SiriusXM audio packages Please review this User Guide to familiarize yourself with Roady BT!

1 . Requires Aux In or Bluetooth capability . Use the included Aux Audio Cable if your vehicle has Aux In capability for best performance . 3 Roady BT User Guide Introduction Safety and Care Information IMPORTANT! Self installation instructions and tips are provided for your convenience . It is your responsibility to determine if you have the knowledge, skills, and physical ability required to properly perform an installation . SiriusXM shall have no liability for damage or injury resulting from the installation or use of any SiriusXM or third party products . It is your responsibility to ensure that all products are installed in adherence with local laws and regulations and in such a manner as to allow a vehicle to be operated safely and without distraction . SiriusXM product warranties do not cover the installation, removal or reinstallation of any product . Do not expose to extreme temperatures (above 140F or below -4F, or above 60C or below

-20C) . Do not expose to moisture . Do not use device near or in water . Do not touch the device with wet hands . Do not let any foreign matter spill into device . Do not store in dusty areas . Do not expose to chemicals such as benzene and thinners . Do not use liquid or aerosol cleaners . Clean with a soft damp cloth only . Do not expose to direct sunlight for a prolonged period of time, and do not expose to fire, flame, or other heat sources . Do not try to disassemble and/or repair device yourself . Do not drop your device or subject it to severe impact . Do not place heavy objects on device . Do not subject device to excessive pressure . If the LCD screen is damaged, do not touch the liquid crystal fluid . Warning!

Opening the case may result in electric shock . If the liquid crystal fluid comes in contact with your skin, wipe the skin area with a cloth and then wash the skin thoroughly with soap and running water . If the liquid crystal fluid comes into contact with your eyes, flush the eyes with clean water for at least 15 minutes and seek medical care . If the liquid crystal fluid is ingested, flush your mouth thoroughly with water . Drink large quantities of water, and induce vomiting . Seek medical care . Make sure that you insert the Intelligent Power Adapter all the way into the vehicles cigarette lighter or power adapter socket . When using this product, it is always important to keep your eyes on the road and hands on the steering wheel . Not doing so could result in personal injury, death, and/or damage to your device, accessories, and/or to your vehicle or other property . Vehicle installation, service activation, and Radio configuration functions should not be performed while driving . Park your vehicle in a safe location before beginning installation . This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm . Your device should be placed in your vehicle where it will not interfere with the function of safety features, e .g ., deployment of airbags . Failure to correctly place device may result in injury to you or others, if the unit becomes detached during an accident and/or obstructs the deployment of an airbag . 4 Roady BT User Guide Whats in the Box?

Introduction 1 2 3 4 5 6 7 8 9 0 Roady BT Radio Intelligent Power Adapter Vent Mount and Extended Vent Clamps Dash Mount Aux Audio Cable Magnetic Adapter Extra Adhesive Magnetic Mount Antenna Display Cable Antenna Alcohol Preparation Pads 5 Roady BT User Guide Introduction Roady BT Button Functions and Connections Roady BT Button Functions Day/Night Brightness Button Press to toggle between day and night brightness setting; press and hold to enter display settings in the menu . Up and Down Buttons Press to preview and tune to channels through the channel lineup; press and hold to continuously scroll through channels; also press to scroll through lists and highlight items in lists . Power Button Press to turn Radio on and off . Menu Button Press to access advanced features and configuration options; when in configuration options, press and hold to return to Now Playing screen . Left and Right Buttons Press to search for channels by category; press and hold to continuously scroll through categories . Select Button Press to confirm selection of highlighted item in a menu or list;

press and hold to set a Song, Artist, or Game Alert at the Now Playing screen . Favorite Bank/Direct Tune Button Press to toggle between favorite banks A & B; press and hold to enter Direct Tune and enter a channel number to tune . Play/Pause, Rewind, Fast-Forward Buttons Play/Pause: Press to pause or resume playing the channel; press and hold to jump to live . Rewind: Press to skip back to the beginning of the song/segment; press and hold to continuously skip back . Fast-Forward: Press to skip forward when listening behind live broadcast;

press and hold to continuously skip forward when listening behind live broadcast . 1 2 3 4 5 6 7 8 9 0 Number Buttons Press to tune to a stored favorite channel; press and hold to store a favorite channel . Also used to enter channel numbers when the Direct Tune button is pressed . Jump Button Press to go back to the previous channel to which you were listening . 6 Roady BT User Guide Introduction Roady BT Connections Roady BT Side View Display Cable Connection Intelligent Power Adapter Rear View Display Cable Connection Intelligent Power Adapter Side View AUDIO FM ANT Aux Cable Connection FM Cable Connection Antenna Cable Connection 7 Roady BT User Guide Installation WARNING! DO NOT attempt to install Roady BT while driving . Park your vehicle in a safe location before beginning installation . Step 1: Choose a Location for Your Radio When installing Roady BT in your vehicle, choose a location where it will not block your vision, interfere with the controls, or obstruct the air bag . The location should be easily accessible and provide good visibility of the display, and should not be located where it will be in direct sunlight, which will affect the visibility of the display screen . Several examples of Roady BT mounted in a vehicle are shown: A is the on dash method using the Dash Mount, and B is the vent clip method using the Vent Mount . Option 1 A. Option 2 A. Option 3 A. Option 4 A. Option 5 Option 6 B. B. 8 Roady BT User Guide Installation Step 2: Install the Dash or Vent Mount Follow the instructions on the next several pages for the mounting method you have selected . Installing the Adhesive Mount CAUTION! The adhesive used on the Adhesive Mount may be difficult to remove . Do not install this mount on leather surfaces (contact your automobile dealership if you are unsure about your dash surface), and make sure the air temperature is at least 60F (15C) during installation . If its not at least 60F, turn on the heater in your vehicle to bring the temperature up to 60F . 1. Locate a flat surface for the Adhesive Mount . Make sure there is ample room for the Intelligent Vehicle Dock and Roady BT Radio when installed . 2. Set the orientation of the Adhesive Mount before adhering it . Loosen the knob and adjust the adhesive foot for the location you selected in Step 1: Choose a Location for Your Radio on page 8 . Option 1 Option 3 Option 2 Option 4 3. The dock mounting plate can be tilted in different directions . Adjust as necessary for your particular vehicle . When the orientation is correct, tighten the knob . Knob Adhesive Foot Mounting Surface for Magnet 4. Remove the adhesive liner from the back of the Magnet and adhere the adhesive side of the Magnet to the Dash Mount . 5. Clean the mounting surface in the vehicle with the alcohol preparation pad and let it dry thoroughly . 6. Once the surface is dry, remove the adhesive liner from the Dash Mount . Press and hold the Dash Mount in place for 30 seconds . Allow the adhesive to cure for 2-4 hours . 7. Attach the Roady BT Display to the magnet on the Dash Mount . IMPORTANT! Allow the Adhesive Mount adhesive to cure (dry) for a minimum of 2-4 hours before using the mount . The best adhesion occurs after 24 hours . TIP! To remove the Adhesive Mount, carefully lift the adhesive pad with your fingers or a spoon . Warming the pad with a hair dryer for several minutes will help soften the adhesive . 9 Roady BT User Guide Installation Installing the Vent Mount 1. Locate a vent with horizontal louvers sturdy enough to hold the Roady Extended Vent Clamps BT Radio . 2. If the vent louvers in your vehicle are recessed, you may need to use the longer vent clamps with the Vent Mount . If so, remove the shorter vent clamps and install the longer ones into the Vent Mount . Be sure to observe the orientation of the vent clamps as shown, and replace both vent clamps . Vent Mount Rear View Short Vent Clamps Vent Mount Rear View Slide Left Clamp to Hole in Center Pull Clamp Out Towards You Insert Round End of the Extended Clamp in the Center Hole Slide Clamp to Left to Complete Installation Repeat to Replace Right Clamp Round End Orientation 3. Remove the adhesive liner from the back of the Magnet and adhere the adhesive side of the Magnet to the Vent Mount . 4. Install the Vent Mount onto the vehicle vent . i. Insert the vent mount into the vent opening . ii. Push until hooked on the rear of the vent louver . Rest the foot against the bottom of the vent . iii. If necessary, adjust the tilt of the Vent Mount by repositioning the foot to a different tilt adjustment hole . I Dash PUSH FOOT Vent Louver II Dash HOOKED Vent III Dash Vent TILT ADJUSTMENT HOLES 5. Attach the Roady BT Display to the magnet on the Vent Mount . TIP! To remove the Vent Mount, push the mount into the vent . Then lift up until disengaged from the rear of the vent louver, and remove the Vent Mount . 10 Roady BT User Guide Installation Step 3: Mount the Magnetic Mount Antenna Mount the Magnetic Mount Antenna on the outside of your vehicle, on a horizontal surface that will always face the sky . The antenna contains a strong magnet which will stick to any metal part of your vehicle, but will not damage the vehicle . 1. Choose the best location for your antenna considering your vehicle type . Pay particular attention to any accessories that you may have like luggage racks and how frequently you may use them . 2. Sedan/Coupe: We recommend mounting the antenna just above either the front windshield or the back window as shown . Magnet 3. SUV: We recommend mounting the antenna at the rear of the roof as shown . 4. Convertible: We recommend mounting the antenna at the leading edge of the trunk as shown . 5. Pickup Truck: We recommend mounting the antenna just above the front windshield as shown . IMPORTANT! Consult a professional installer if your vehicle roof or hood is non-metallic

(i .e ., fiberglass), or you have difficulty finding a location for your antenna . 6. Clean the surface of the selected mounting location using the alcohol preparation pad and let it dry thoroughly . 11 Roady BT User Guide Installation 7. Place the antenna in the location you selected . Follow the Tips and Cautions shown below . TIP! Mount the antenna on the roof (for most vehicles) or trunk (for convertibles) where it has a clear view of the sky in all directions

. CAUTION! Dont mount the antenna inside the vehicle, for example, on the dashboard . CAUTION! Dont mount the antenna on any of the vehicles front, back or side pillars . CAUTION! Dont mount the antenna close to a roof rack . Adjust the rack so its further away from the antenna or move the antenna closer to the center of the roof . CAUTION! Dont mount the antenna close to another antenna . Mount it at least 3 inches away . 12 Roady BT User Guide Installation Step 4: Route the Antenna Cable Before you begin routing the antenna cable, read these general instructions for how to route and hide the antenna cable . Then route your antenna cable according to the step-by-step instructions which follow for your specific type of vehicle . Use care when routing the antenna cable into and through the vehicle interior, avoiding sharp objects that can damage the cable . Keep the antenna cable away from moving parts such as gas, clutch, and brake pedals, trunk and door hinges, and sliding seat brackets . Hide the antenna wire inside the vehicle cabin by routing the cable under the carpet and behind plastic trim, toward the Tuner Module location . Coil and secure any excess cable in a hidden location, such as under the carpet, using wire ties (not included) . CAUTION! Do not kink or sharply fold the antenna cable . Use a blunt plastic putty knife, a credit card, a plastic knife, or a similar blunt tool to lift the rubber window moulding Tuck the cable under the moulding around the window Feed cable under rubber moulding around window 13 Roady BT User Guide Installation Route cable out from under rear windshield moulding and tuck into weatherstripping around trunk opening Avoid sharp bends by running cable through weatherstripping for several inches Pull weatherstripping from trunk opening Tuck cable into weatherstripping. Route cable through weatherstripping several inches to avoid sharp bends Pull cable out of weatherstripping and route through trunk to cabin Route cable out of window moulding and into weather-

stripping around trunk opening Bring cable out of weatherstripping and into trunk Route cable along trunk wall and into cabin through gap or conduit, along existing wiring harness Route cable along trunk wall and into cabin 14 Roady BT User Guide Installation Use a blunt plastic putty knife or similar blunt tool to lift edge of interior trim and tuck cable under trim. Continue towards front of vehicle Route cable under trim or upholstery Continue routing cable under trim or carpet towards front of vehicle Route cable from trunk under interior trim, into cabin and towards front of vehicle Continue routing cable under carpet or console to Intelligent Power Adapter location Pull carpet or mat back Coil excess cable under carpet or mat Bring cable out from trim and route under carpet to dashboard or console Bring cable out from trim TIP! Always be careful to include enough slack in your cable to accommodate open doors or trunk lids . Use things typically found around the home, like electrical tape, to secure cables in areas so that hinges do not pinch the cable with the door . Hide any excess cable in the trim . 15 Roady BT User Guide Installation Sedan/Coupe With Antenna Placed at the Rear of the Roof:

1. Feed the antenna cable from the antenna underneath the rubber molding around the rear window . Use a blunt plastic putty knife or similar blunt tool to lift the rubber molding around the rear window and tuck the antenna cable underneath the molding . Route the antenna cable around and down the window to the lowest point . If your rear window does not have rubber molding, we recommend consulting a professional installer . 2. Route the antenna cable out of the window molding and into the rubber weather stripping around the trunk opening . Lift the weather stripping from the opening and tuck the cable inside it, then replace the weather stripping . To avoid sharp bends in the cable, run the cable inside the weather stripping for a few inches, then remove the cable from the weather stripping inside the trunk . Keep the cable away from hinges, gears, etc ., that could damage it . 3. Route the cable out from the rubber weather stripping and along the trunk wall . Continue routing the cable into the vehicle cabin through a conduit or along an existing wiring harness . 4. Route the cable through the main cabin area under the interior trim, towards the front of the vehicle . Use a blunt plastic putty knife or similar blunt tool to lift the plastic trim just enough to tuck the cable under underneath . Avoid side airbag locations on back pillars and above the doors . Airbag locations are marked with SRS logos . Be careful not to crimp or cut the cable . 5. Bring the cable out from the trim near the front of the cabin and route it under the carpet toward the dashboard or console . Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls . Secure the excess cable with wire ties (purchased separately) . 6. Bring the end of the cable out at the Intelligent Vehicle Dock location . Leave yourself enough cable so you can easily connect it to the antenna connector of the dock . 7. Continue with Step 5: Connect the Magnetic Mount Antenna and Display Cable on page 18 . Sedan/Coupe With Antenna Placed at the Front of the Roof 1. Feed the antenna cable from the antenna underneath the rubber molding around the windshield . Use a blunt plastic putty knife or similar blunt tool to lift the rubber molding around the windshield and tuck the antenna cable underneath the molding . Route the antenna cable around and down the windshield to the lowest point . 2. At the lowest corner of the windshield, route the cable out of the windshield molding and into the rubber weather stripping around the door opening . Lift the weather stripping from the opening and tuck the cable inside it, then replace the weather stripping . Run the cable inside of the weather stripping to the bottom of the door opening . 3. Pull the cable out of the weather stripping at the bottom of the door opening and route it under the carpet toward the dashboard . Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls . Secure the excess cable with wire ties . 4. Bring the end of the cable out at the Intelligent Vehicle Dock location . Leave yourself enough cable so you can easily connect it to the antenna connector of the dock . 5. Continue with Step 5: Connect the Magnetic Mount Antenna and Display Cable on page 18 . 16 Roady BT User Guide Installation Sport Utility Vehicle (SUV) 1. Feed the antenna cable underneath the rubber weather stripping of the rear tailgate window/

door and route the cable along the rear hatch . Lift the weather stripping from the opening and tuck the cable inside it, then replace the weather stripping . Pull the cable out from weather stripping and route it into the cabin under the interior trim . Avoid hinges or gears that could crimp or cut the cable . 2. Route the cable through the SUVs main cabin area under the interior trim, towards the front of the vehicle . Use a blunt plastic putty knife or similar blunt tool to lift the plastic trim just enough to tuck the cable under underneath . Avoid side airbag locations on back pillars and above the doors . Airbag locations are marked with SRS logos . Be careful not to crimp or cut the cable . 3. Bring the cable out from the trim near the front of the cabin and route it under the carpet toward the dashboard or console . Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls . Secure the excess cable with wire ties (purchased separately) . 4. Bring the end of the cable out at the Intelligent Vehicle Dock location . Leave yourself enough cable so you can easily connect it to the antenna connector of the dock . 5. Continue with Step 5: Connect the Magnetic Mount Antenna and Display Cable on page 18 . Convertible 1. Bring the antenna cable from the antenna into the trunk at the front edge of the trunk lid . Keep any bends in the cable loose . Tape or tie the cable along the inside of the trunk lid to the trunk lid hinge strut . 2. Allow enough slack in the cable so the trunk lid can easily open and close and keep the cable away from hinges, gears, etc ., that could crimp or cut it . Route the cable along the trunk wall and into the cabin through a conduit or along an existing wiring harness . 3. Route the cable through the main cabin area under the interior trim, towards the front of the vehicle . Use a blunt plastic putty knife or similar blunt tool to lift the plastic trim just enough to tuck the cable under underneath . Avoid side airbag locations on back pillars and above the doors . Airbag locations are marked with SRS logos . Be careful not to crimp or cut the cable . 4. Bring the cable out from the trim near the front of the cabin and route it under the carpet toward the dashboard or console . Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls . Secure the excess cable with wire ties (purchased separately) . 5. Bring the end of the cable out at the Intelligent Vehicle Dock location . Leave yourself enough cable so you can easily connect it to the antenna connector of the dock . 6. Continue with Step 5: Connect the Magnetic Mount Antenna and Display Cable on page 18 . Pickup Truck 1. Use a blunt plastic putty knife or similar blunt tool to lift the rubber molding around the windshield and tuck the antenna cable underneath it . 2. Continue tucking the cable underneath the windshield molding around the windshield to the 17 Roady BT User Guide Installation lowest corner . 3. At the lowest corner of the windshield, route the cable out of the windshield molding and into the rubber weather stripping around the door opening . Lift the weather stripping from the opening and tuck the cable inside it, then replace the weather stripping . Run the cable inside of the weather stripping to the bottom of the door opening . 4. Pull the cable out of the weather stripping at the bottom of the door opening and route it under the carpet toward the dashboard . Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls . Secure the excess cable with wire ties . 5. Bring the end of the cable out at the Intelligent Vehicle Dock location . Leave yourself enough cable so you can easily connect it to the antenna connector of the dock . 6. Continue with Step 5: Connect the Magnetic Mount Antenna and Display Cable on page 18 . Step 5: Connect the Magnetic Mount Antenna and Display Cable 1. Plug the Magnetic Mount Antenna connector into the ANT connector on the Intelligent Power Adapter . AUDIO FM ANT 2. Connect one end of the Display Cable to the Intelligent Power Adapter and the other end to the Roady BT display . 3. Insert the Intelligent Power Adapter into your vehicles cigarette lighter or power adapter socket . 4. Roady BT should power on automatically . If not, press the Power button on Roady BT to turn it on . 18 Roady BT User Guide Installation Step 6: Connect the Audio To play the SiriusXM audio through your vehicles radio/headunit, decide on one of the following audio connection options:

Option 1: Best: Use the provided Aux Audio Cable if your vehicles radio/headunit has an auxiliary input connection or jack . Refer to your vehicles owners manual to find the location of the auxiliary input jack, or consult the vehicle dealer . TIP! The auxiliary input jack may be located on the face plate of the vehicle radio/headunit, on the back of the radio/headunit, anywhere on the front dash panel, inside the glove compartment, or inside the center console between the front seats . Option 2: Best: Connect the audio using Bluetooth if your vehicles radio/headunit supports Bluetooth, and supports the Bluetooth audio streaming protocol . If the vehicle radio/headunit supports only the Bluetooth phone protocol, Bluetooth cannot be used for the Roady BT audio connection . Option 3: Good: Connect the audio using the FM feature of Roady BT . If none of the previous two audio connection options will work in your vehicle, then you will need to use the FM Direct Adapter (FMDA) (sold separately) . The FMDA needs to be installed by a professional installer and directly connects Roady BT to your vehicles FM radio . To learn more, check with the retailer where you bought your Roady BT, or go to www .siriusxm .com/accessories . Follow the installation instructions in the next several sections for the audio connection option that you have selected . 19 Roady BT User Guide Installation Option 1: Aux Audio Cable Installation Instructions 1. Plug one end of the Aux Audio Cable into the AUDIO connector of the Intelligent Power Adapter and the other end into the auxiliary input (Aux or Audio) jack in the vehicle . AUDIO FM ANT A U X 2. Turn on your vehicles radio/headunit and set it to play from the auxiliary input source . 3. Press Menu on Roady BT, and then press to highlight Audio Settings and press Select . 4. Audio Output will be highlighted . Press the Select button until AUX is shown as the selected audio output . 5. Wait a moment while the Aux audio is enabled and then you should hear the SiriusXM audio playing through the radio/headunit . 6. Be sure the vehicle is outside and the antenna has a clear view of the sky . Verify that you are receiving the SiriusXM signal . There should be at least two bars on the upper left corner of the Now Playing screen that denotes antenna signal strength . You can also press Menu and then press down to scroll to and highlight Signal Indicator . Press the Select button . The Satellite and Terrestrial bars show the strength of the signal being received . If the signal reception is good, press and hold Menu to return to the main display screen . 7. Ensure Roady BT is tuned to channel 1, the SiriusXM Preview channel . Upon power up, Roady BT should tune to channel 1 by default, when its not yet activated . If its not on channel 1, refer to Tuning to a Channel on page 32 to learn about how to tune a channel . 8. The audio installation is complete . Continue to Activation on page 29 . The audio level output of Roady BT can be increased or decreased as necessary to match the audio levels of other sources in your vehicle . Refer to Audio Level on page 50 . If the signal reception is good, showing at least two bars in the lower left corner of the display, but there is no SiriusXM audio, be sure the vehicles radio/headunit is set to the auxiliary input source (step 8) . Also be sure that the audio level is set high enough to be heard (step 8) . Refer to Troubleshooting on page 58 for additional help . 20 Roady BT User Guide Installation Option 2: Bluetooth Installation Instructions Important! Roady BT is only compatible with radios and headunits which support the Bluetooth audio streaming protocol . If the vehicle radio/headunit only supports the Bluetooth phone protocol, Bluetooth cannot be used for the Roady BT audio connection . There are two methods of pairing Roady BT with your radio/headunit:

A. Pairing from Roady BT to the radio/headunit . In this method you will place the radio/headunit into pairing mode to passively wait for a pairing request from Roady BT . You will select your radio/headunit from a list of Bluetooth devices that Roady BT has discovered, and complete the pairing and connection to the radio/headunit . B. Pairing from the vehicle radio/headunit to Roady BT . Using this method you will place Roady BT into pairing mode to passively wait for a pairing request from the vehicle radio/

headunit . You will select Roady BT from a list of Bluetooth devices that the radio/headunit has discovered, and complete the pairing and connection to Roady BT . While many vehicle radio/headunits support method A, not all do, and you may need to use method B . Begin with Method A: Bluetooth pairing from Roady BT to the radio/headunit on page 22 . If you discover that Bluetooth pairing must be initiated from your radio/headunit skip ahead to Method B:

Bluetooth pairing from the vehicle radio/headunit to Roady BT on page 24 . Bluetooth Support Please be aware that there are many nuances in vehicle radio/headunits as to how each manufacturer has implemented Bluetooth pairing and connection . To help make your Bluetooth installation as easy as possible, SiriusXM has done extensive testing with many different radio/headunits and has provided FAQs with tips and information to assist you if you encounter any difficulties with Bluetooth

(and other features) . Using a mobile device such as your phone, scan the following QR code:

or go to www .siriusxm .com/roadybt-support for additional assistance . SiriusXM also has a dedicated email where you can receive personalized support from SiriusXM experts: roadybt@siriusxm .com . 21 Roady BT User Guide Installation Method A: Bluetooth pairing from Roady BT to the radio/headunit 1. Temporarily turn off Bluetooth capability in any devices that you may have with you during the installation, such as a cellphone, to avoid other devices connecting to the vehicles radio/

headunit instead of Roady BT . 2. Turn on the vehicles radio/headunit and place it in Bluetooth pairing mode . Refer to the vehicle owners manual for instructions on how to do this . 3. Press Menu on Roady BT and then, press to highlight Audio Settings and press the Select button . 4. Audio Output will be highlighted . Press the Select button until Bluetooth is shown as the selected audio output, and then wait a moment while Bluetooth audio is enabled . 5. Press to highlight Bluetooth Settings and press the Select button . 6. Highlight Add New Bluetooth Device and press the Select button . 7. The Pair Bluetooth Device message is displayed . Verify that the vehicles radio/headunit is on, is discoverable and in pairing mode and press the Select button to continue . 8. Wait as Roady BT searches for discoverable Bluetooth devices . When the vehicles radio/headunit to highlight the name and press the Select button . (If you dont know is shown in the list, press the Bluetooth name of the radio/headunit, refer to the vehicle owners manual for the name .) 22 Roady BT User Guide Installation 9. Roady BT will begin pairing . During the process you may or may not be prompted to confirm a PIN/Passcode, or enter a PIN/Passcode . If prompted, follow the displayed instructions and confirm or enter the PIN/Passcode . 10. When connected will display a Successfully Connected message . If the Bluetooth pairing and connection failed, skip to step 14 . 11. Press the Select button . Press and hold Menu to exit to the Now Playing screen . Wait a moment and then you should hear the SiriusXM audio playing through the radio/headunit . 12. Be sure the vehicle is outside and the antenna has a clear view of the sky . Verify that you are receiving the SiriusXM signal . There should be at least two bars on the upper left corner of the Now Playing screen that denotes antenna signal strength . You can also press Menu and then press down highlight Signal Indicator . Press the Select button . The Satellite and Terrestrial bars show the strength of the signal being received . If the signal reception is good, press and hold Menu to return to the main display screen . to scroll to and 13. Ensure Roady BT is tuned to channel 1, the SiriusXM Preview channel . Upon power up, Roady BT should tune to channel 1 by default, when its not yet activated . If its not on channel 1, refer to Tuning to a Channel on page 32 to learn how to tune a channel . 14. The audio installation is complete . Continue to Activation on page 29 . Note that the audio level output of Roady BT can be increased or decreased as necessary to match the audio levels of other sources in your vehicle . Refer to Audio Level on page 50 . 15. If the Bluetooth pairing and connection failed, try again using the alternate Bluetooth Device Class . Follow the steps in Changing the Bluetooth Device Class on page 26, and then return here to step 6 . If method A was unable to pair and connect Roady BT to your radio/headunit try Method B:

Bluetooth pairing from the vehicle radio/headunit to Roady BT on page 24 . Also refer to Bluetooth Support on page 21 for the Roady BT FAQs which have the very latest Bluetooth tips and information . 23 Roady BT User Guide Installation Method B: Bluetooth pairing from the vehicle radio/headunit to Roady BT 1. Temporarily turn off Bluetooth capability in any devices that you may have with you during the installation, such as a cellphone, to avoid other devices connecting to the vehicles radio/

headunit instead of Roady BT . 2. Press Menu on Roady BT and then, press to highlight Audio Settings and press the Select button . 3. Audio Output will be highlighted . Press the Select button until Bluetooth is shown as the selected audio output, and then wait a moment while Bluetooth audio is enabled . 4. Press to highlight Bluetooth Settings and press the Select button . 5. Highlight Add New Bluetooth Device and press the Select button 6. The Pair Bluetooth Device message is displayed . Press the Select button to continue . 7. Press to highlight Pair from headunit/radio and press the Select button . (Note that Pair from headunit/radio will not be shown if Roady BT found any Bluetooth devices . Thats OK, just skip this step and continue with the next step .) 8. Next go to the vehicles radio/headunit in Bluetooth and initiate pairing . Refer to the vehicle owners manual for instructions on how to do this . Look for Roady BT in the list of Bluetooth devices and pair and connect to it . 24 Roady BT User Guide Installation 9. Pairing will begin . During the process you may or may not be prompted to confirm a PIN/

Passcode, or enter a PIN/Passcode . If prompted, follow the displayed instructions and confirm or enter the PIN/Passcode . 10. If pairing and connection was successful, Roady BT will display a Successfully Connected message . If the Bluetooth pairing and connection failed, skip to step 15 . 11. Press the Select button . Press and hold Menu to exit to the Now Playing screen . Wait a moment and then you should hear the SiriusXM audio playing through the radio/headunit . 12. Be sure the vehicle is outside and the antenna has a clear view of the sky . Verify that you are receiving the SiriusXM signal . There should be at least two bars on the upper left corner of the Now Playing screen that denotes antenna signal strength . You can also press Menu and then press down highlight Signal Indicator . Press the Select button . The Satellite and Terrestrial bars show the strength of the signal being received . If the signal reception is good, press and hold Menu to return to the main display screen . to scroll to and 13. Ensure Roady BT is tuned to channel 1, the SiriusXM Preview channel . Upon power up, Roady BT should tune to channel 1 by default, when its not yet activated . If its not on channel 1, refer to Tuning to a Channel on page 32 to learn how to tune a channel . 14. The audio installation is complete . Continue to Activation on page 29 . Note that the audio level output of Roady BT can be increased or decreased as necessary to match the audio levels of other sources in your vehicle . Refer to Audio Level on page 50 . 15. If the Bluetooth pairing and connection failed try again using the alternate Bluetooth Device Class . Follow the steps in Changing the Bluetooth Device Class on page 26, and then return here to step 5 . If you were unable to pair and connect, refer to Bluetooth Support on page 21 for the Roady BT FAQs which have the very latest Bluetooth tips and information . 25 Roady BT User Guide Installation Changing the Bluetooth Device Class If Bluetooth pairing and connection failed you can try again using the alternate Bluetooth Device Class . Switch to the class and then return to Method A or B . 1. Press Menu once or twice to return to the Bluetooth Audio screen . 2. Press to highlight Bluetooth Device Class and press the Select button . 3. Press the Select button again to confirm changing the Bluetooth Device Class to alternate . 4. For method A, continue with step 6 in Method A: Bluetooth pairing from Roady BT to the radio/headunit on page 22 . For method B continue with step 5 in Method B: Bluetooth pairing from the vehicle radio/

headunit to Roady BT on page 24 . 26 Roady BT User Guide Installation Option 3: FM Installation Instructions The FM Direct Adapter (required, and sold separately) should be installed by a professional installer . Professional installation can help improve your Roady BTs reception and significantly reduce the visibility of wires . To learn more, check with the retailer where you bought Roady BT, or go to www . siriusxm .com/accessories . 1. Purchase an FM Direct Adapter (FMDA25) and have it installed by a professional, or install it by following the installation instructions included with the FMDA25 . 2. Connect the FM cable from the FMDA25 to the FM connector on the AUDIO FM ANT Intelligent Power Adapter . 3. Press Menu on Roady BT and then, press Settings and press the Select button . to highlight Audio 4. Audio Output will be highlighted . Press the Select button until FM is shown as the selected audio output . Wait a moment while FM audio is enabled . 5. Be sure the vehicle is outside and the SiriusXM antenna has a clear view of the sky . Verify that you are receiving the SiriusXM signal . There should be at least two bars in the upper right corner of the Now Playing screen that denotes antenna signal strength . You can also press Menu and then press Signal Indicator . Press the Select button . The Satellite and Terrestrial bars show the strength of the signal being received . If the signal reception is good, press and hold Menu to return to the Now Playing screen . to scroll to and highlight 6. Youll first need to find an available FM channel . An available FM channel is one thats not being used by an FM radio station in your area . When you tune your vehicles FM radio to an available channel, you should only hear static or silence not talk or music . We recommend one of the following methods to find an available FM channel:

a . Use the SiriusXM FM Channel Finder at www .siriusxm .com/fmchannel . Go to the website and enter your zip code . The Channel Finder will suggest a list of available FM channels in your area . For convenience, write down or print out the list . OR b . Manually tune through your local FM channels on your vehicles FM radio . Locate and create a list of channels that arent being used by any FM radio station . Write down the list . Once you have created your list of available FM channels, you will need to find the one that provides the best match for Roady BT . TIP! Youll need to use the Manual tune function on your vehicles FM radio to tune through every FM channel one-by-one . Turn on your vehicles FM radio . Start at 88 .1 and use the Manual tune function on your vehicles FM radio to tune through each FM channel one-by-one (88 .1 followed by 88 .3 etc .) to locate channels that arent being used by a local 27 Roady BT User Guide Installation FM radio station . Write down each FM channel that has only static or silence on it, until you reach 107 .9 . 7. Ensure Roady BT is tuned to channel 1, the SiriusXM Preview channel . Upon power up, Roady BT should tune to channel 1 by default, when its not yet activated . If its not on channel 1, refer to Tuning to a Channel on page 32 to learn about how to tune a channel . 8. Pick the first FM channel on your list from step 6 . Turn on your vehicles FM radio (if you have not already done so) and tune it to this FM channel . 99.3 1 2 3 4 5 6 7 8 9 0 MATCH FM CHANNELS 9. Set your Roady BT to transmit on the same FM channel that you have selected in step 8:

i . Press Menu . ii . Press to scroll to and highlight Audio Settings and press the Select button . iii . Press to scroll to and highlight FM Channels and press the Select button . iv . Press to scroll to and highlight the storage location FM 2 and press the Select button . v . Tune to the available FM channel you choose in step 8 . Press and to tune in steps of .2, i .e ., 99 .3 to 99 .5 . Press to tune in steps of 1, i .e ., 99 .3 to 100 .3 . Press the Select button to select the FM channel . and vi . The FM channel you selected will be confirmed on the display screen . Press Menu . 10. You should hear SiriusXM audio through your vehicles FM radio . If you are satisfied with the sound quality, the audio installation is complete . Continue to Activation on page 29 . Note that the audio level output of Roady BT can be increased or decreased as necessary to match the audio levels of other sources in your vehicle . Refer to Audio Level on page 50 . 11. If the selected FM channel doesnt work well for you, work down the list of FM channels until you find one with which you are satisfied . Each time, you will need to tune your vehicles FM radio to the FM channel and then set your Roady BT to transmit on the same FM channel (steps 8 & 9) . If the signal reception is good, showing at least two bars in the lower left corner of the display, but there is no SiriusXM audio, verify that both Roady BT and your vehicles FM radio are tuned to the same FM channel (steps 8 & 9) . Also ensure the chosen FM channel is a suitable one to use in your area (step 6) . Refer to Troubleshooting on page 58 for additional help . 28 Roady BT User Guide Activation You can follow either the General Activation and Subscription Process or use the On-Board Activation Guide to activate your Roady BT and subscribe to the SiriusXM service . General Activation and Subscription Subscribe to the SiriusXM service by following these steps:

1. Make sure your Roady BT is turned on, tuned to SiriusXM Preview channel 1, and receiving the SiriusXM signal so that you can hear the SiriusXM audio . 2. Make a note of the SiriusXM Radio ID . You can find it:

by selecting Radio ID in menu items on channel 0 (zero) on a label on the bottom of the gift box on the label on the back of your Roady BT NOTE! The SiriusXM Radio ID does not use the letters I, O, S, or F .

*The phone number show above may differ from the one shown on your Roady BT . All numbers are valid . 3. To subscribe:

Online: Go to www .siriusxm .com/activatenow to access or set up an online account, subscribe to the service, and activate your Radio . OR By phone: Call 1-866-635-2349 . Activation usually takes 10 to 15 minutes after you have completed the subscription process, but may take up to an hour . We recommend that your Radio remain on until subscribed . Once subscribed, the Radio will receive and you can tune to channels in your subscription plan . or down Press up categories of channels . Learn what all the buttons do by turning to Navigation Basics on page 30 . to tune to other channels, and left or right to browse the different On-Board Activation Guide For your convenience, Roady BT has an on-board activation guide . You can activate your radio and subscribe to the SiriusXM service by using this guide, where you will be guided step-by-step through the subscription process . To access and use the activation guide, follow these steps:

1. Turn Roady BT on and press Menu . 2. Activate Radio will be highlighted . Press the Select button . 3. Follow the directions on each successive screen until you complete the subscription process . 29 Roady BT User Guide Using Your Roady BT Navigation Basics Power Button Pressing the Power button turns Roady BT On or Off . Navigation Buttons Pressing Left, Right, Up, and Down navigates through various features and functions of Roady BT . Left or Right button: Displays the channel categories such as Rock, Pop, Sports, Talk/

News, etc . Repeated presses cycle through the categories one at a time . Also, decreases or increases the settings of various menu options such as Brightness, Audio Level, etc . or Down Up the channel lineup . Also, scrolls through lists and highlights an item in the list . button (press and release): Immediately tunes to the next or previous channel in or Down button (press and hold): Continuously scrolls through any list . While on the main Up display screen, continuously scrolls through the channel lineup and briefly displays the information of each channel . When the button is released, Radio tunes to the last channel it had scrolled to in the channel lineup . Select Button Pressing the Select button displays and dismisses the favorite channel preview pane at the main display screen . Pressing the Select button selects a highlighted item in a list and confirms settings . Menu Button Pressing the Menu button displays various options to make setup and feature changes . Pressing Menu when in menu options returns to the previous menu option screen until menu options is exited . Pressing and holding Menu returns to the main display screen in most instances . Day/Night Brightness Button Pressing the Day/Night Brightness button toggles between the day and night screen brightness setting . Pressing and holding the Day/Night Brightness button enters the display settings in the menu where day and night brightness settings can be adjusted . Jump Button Depending on how it is configured, pressing Jump either tunes to the previous channel that was being played, or tunes to the channel broadcasting traffic and weather conditions of a city of your choice which has been selected from a list of cities . Pressing and holding Jump toggles the display screen between black background with white text and white background with black text . 30 Roady BT User Guide Using Your Roady BT Favorite Bank/Direct Tune Button Press the Favorite Bank/Direct Tune button to toggle between favorite banks A & B . Press and hold the Favorite Bank/Direct Tune button to enter a channel number using the number buttons . Once the channel number is entered the Radio directly tunes to the new channel . Favorite Bank/Direct Tune Button Press to toggle between favorite banks A & B; press and hold to enter Direct Tune and enter a channel number to tune . Play/Pause, Rewind, Fast-Forward Buttons Press the Play/Pause button to pause or resume playing the channel . Press and hold the Play/Pause button to jump to live . Press the Rewind button to skip back to the beginning of the song/segment . Press and hold the Rewind button to continuously skip back . Press the Fast-Forward button to skip forward when listening behind live broadcast . Press and hold the Fast-Forward button to continuously skip forward when listening behind live broadcast . Number Buttons

... 0 1 Each number button stores a favorite channel in its button location and provides one touch access to tune the channel . Number buttons also directly tune to a channel when the channel number is entered after pressing and holding the Favorite Bank/Direct Tune button . Now Playing Screen When listening to a channel, information about the channel and what is currently playing is displayed on the Now Playing screen . Channel Logo Audio Source (Bluetooth, Aux, FM) Channel Number Favorite Channel Artist or Show Name or Talk Show Host Or Sports Teams/Score Song Name or Talk Show Schedule Or Game Time/Details Content/Channel Information Channel Category Current Favorite Bank Signal Strength Album Art Replay Timeline TuneStart (or mute Indicator 31 Roady BT User Guide Using Your Roady BT Returning to the Now Playing Screen Pressing and holding Menu in most instances will return you to the Now Playing screen when not at the Now Playing screen . In some instances, you may need to follow the instructions displayed on the screen to return to the Now Playing screen . Tuning to a Channel Press and release and to immediately tune to the next or previous channel . and to quickly scroll through the channels . Release to tune to the channel that is Press and hold displayed . Jump Pressing Jump will jump back to the immediate previous channel to which you were listening . Use Jump to toggle back and forth between two channels . Direct Tune A channel can be tuned directly by entering the channel number . 1. To directly tune to a channel press and hold Favorite Bank/Direct Tune button until the Direct Tune screen is displayed . 2. Use the number buttons 0-9 to enter the channel number and wait until the channel is tuned, or press the Select button to immediately tune to the channel . If you make a mistake while entering the channel number, press to delete the number that was entered . Note that invalid channel numbers cannot be tuned . For example, you can enter channel 9 and channel 99, but if you attempt to enter channel 999, Roady BT will not allow you to enter the third 9 digit . Categories Channels are organized into categories to make it easier for you to find channels, such as Pop, Rock, Country, Family, etc . In addition to the regular categories, there are special category for Favorite channels, Sports Games, and Replay List . When you press from the Now Playing screen the these categories are shown . Also, if you are tuned to a favorite channel, when you press category shown . the Favorites category is the first Browsing Categories 1. To view channels in a category in a list press or

. 32 Roady BT User Guide Using Your Roady BT 2. Scroll through the channels in a category by using and Press the Select button to tune to a highlighted channel, or press or previous or next category . to find the channel you want to tune . to view channels in the Scanning Channels in a Category You can scan a category and listen to each channel for 10 seconds as Roady BT automatically tunes to each channel in the category . If you want to stay tuned to the channel being played and stop the scan, just press the Select button . To scan a category:

1. Press or until the desired category is displayed . 2. Scroll down and highlight the last item in the category which will be Scan and the category name . 3. Press the Select button . The scan will begin . 4. Press the Select button to stop the scan and to continue to listen to the channel currently being or Menu to return to the channel you were listening to before you began or played, or press the scan . 33 Roady BT User Guide Using Your Roady BT Favorite Channels You can select up to 20 of your favorite channels so you can easily tune to them . Each favorite channel can be assigned to a number button . To assign or replace a favorite channel to a number button:

1. Tune to the channel to be saved as a favorite . 2. Press the Favorite Bank/Direct Tune button to select favorite bank A or B . 3. Press and hold a number button between 0-9 that you want to assign for the favorite channel . An advisory with the channel number and name will be displayed on the screen confirming that the channel has been assigned . 4. If a favorite channel is already assigned to the number button, an advisory will be displayed prompting you to replace the favorite channel or to cancel saving . Press the Select button to replace the favorite channel or Menu to cancel the replacement . To listen to a favorite channel:

1. Select the favorite bank by pressing the Favorite Bank/Direct Tune button to select favorite bank A or B . 2. Press the number button between 0-9 that was assigned to the desired favorite channel . Roady BT will tune to the favorite channel . TIP! When you are at the Now Playing screen, press to see your list of favorite channels . Scroll to highlight a favorite channel and press the Select button to listen to that channel . To erase favorite channels:

All favorite channels, or just the favorite channels in bank A or B, can be erased all-at-once . 1. Press Menu . 2. Press to scroll to and highlight Feature Settings . Press the Select button . 3. Press to scroll to and highlight Erase Favorite Channels . Press the Select button . 4. Highlight your choice, Erase All Favorites, Erase All Favorites In Bank A, or Erase All Favorites In Bank B and press the Select button . 5. You will be prompted that favorite channels are about to be erased . Press the Select button to erase all favorite channels or Menu to cancel . 6. A confirmation message will be displayed . Press the Select button to confirm or press Menu to cancel . 7. Press and hold Menu to return to the Now Playing screen . 34 Roady BT User Guide Using Your Roady BT Pause & Replay Pause & Replay gives you the opportunity to hear that again by temporarily storing and then letting you access the stored content . For the currently tuned channel, you can pause and replay for as long as you have been tuned to the channel, up to a maximum of approximately 60 minutes . A replay timeline is displayed when you are not listening to the channel live . You can also Pause and Replay up to approximately 30 minutes from channels which you have saved as smart favorite channels, and also from the channel that was tuned immediately prior to the currently tuned channel . Pressing places the Radio into Pause & Replay mode . or Turning Roady BT off removes the temporarily stored content from the Radio . To Play/Pause:

1. Press and release to pause the audio . At this point the Radio will mute and continue to store live audio . 2. Pressing and releasing again will begin playing stored audio from the point at which the Radio was paused . TIP! Pressing (or pressing twice if favorite channels are stored) will show the Replay List . A listing of artist names and song or show titles are shown for the stored audio from most recent to oldest, beginning with entry called Go to Live . Press up to scroll to and highlight a song or program and press the Select button to play it . Choosing Go to Live exits Pause & Replay mode and resumes playing the live broadcast . or down To listen to the previous track:

1. Press and release to rewind to the beginning of the current song or program . 2. Repeated press and releases skips backwards to the start of the previous songs or programs until the beginning of the stored audio is reached . When the beginning is reached, playback automatically begins . TIP! Pressing and holding rewinds through stored audio in 5 second intervals, which increases to 15 and then 30 second intervals the longer the button is pressed . Playback begins when the button is released . If the beginning of the stored audio is reached, playback automatically begins . To listen to the next track:

1. Press and release to skip forward to the start of the next song or program . 2. Repeated press and releases skips forward to the beginning of the next songs or programs until the end of stored audio is reached . When the end is reached, the Radio will exit Pause & Replay mode and resume playing the live broadcast . advances through the stored audio in 5 second intervals, TIP! Pressing and holding which increases to 15 and then 30 second intervals the longer the button is pressed . Playback begins when button is released . If end of stored audio is reached, the Radio exits Pause & Replay mode and resumes playing the live broadcast . To listen to live broadcast:

1. Pressing and holding while the Radio is in Pause & Replay mode exits Pause & Replay mode and resumes playing the live broadcast . 35 Roady BT User Guide Using Your Roady BT Song/Artist Alerts You can set your Roady BT to alert you when the following events occur:

Song Alert: Alerts can be set for your favorite songs, so that whenever the song begins to play on any music channel, you will be alerted and given the opportunity to tune to the channel . Artist Alert: Alerts can be set for your favorite artists, so that whenever a song by that artist begins to play on any music channel, you will be alerted and given the opportunity to tune to the channel . Song and artist alerts can be saved while you are tuned to a channel where the song or artist is currently playing . Alerts can be set while listening to the live broadcast and in Pause and Replay mode . You can save up to 100 Song and Artist Alerts . If the alert list is full you will be prompted to replace an existing alert . Alerts are displayed visually and are accompanied by an optional audible alert beep, except when you are not at the Now Playing screen . If you are not at the Now Playing screen, you will hear the audible alert beep (provided its turned on), but the visual alert will be delayed until you have returned to the Now Playing screen . If a single alert is displayed, you can press the Select button to tune to the channel, or press Menu to dismiss the alert, or wait for the alert to time out . There may be occasions when several Song/Artist Alerts happen simultaneously, and then a list of alerts will be displayed . These multiple alerts can be a mixture of Song, Artist, and Game alerts, depending upon what alerts you have saved . You can browse through the multiple alerts by pressing up Once you have selected an alert from the list, all other alerts in the list are dismissed . to scroll to and highlight an alert, and press the Select button to tune to the channel . or down To save a Song or Artist Alert:

1. While the song is playing press and hold the Select button . TIP! You can save an alert for a song or artist that you had listened to previously on the channel . Press to rewind to the song . 2. You will be prompted to select whether to save a Song Alert or an and press the Artist Alert . Highlight your choice by pressing Select button, or press Menu to cancel . or 3. A message will confirm that you have successfully saved the alert, and how many alerts you have saved, and how many are still available to save . 4. Press and hold Menu to return to the Now Playing screen . TIP! If you saved an Artist Alert for a song, you will not be able to save a song alert, and the message Artist Alert Already Saved will be displayed . This happens because you will be alerted whenever any song by that artist begins to play, so it is not necessary to save individual songs by the artist . 36 Roady BT User Guide Using Your Roady BT To edit Song and Artist Alerts:

Individual Song and Artist alerts can be edited in the following ways:

Turn specific alerts on or off (on/off): An individual Song or Artist alert can be turned off so you no longer receive the alert, but it is still kept in the alert list so you can turn it back on . Switch alert (switch): Roady BT remembers both the Song and the Artist for each saved alert, although you will only receive an alert for what you had selected . Switching the alert provides the ability to turn a Song Alert into an Artist Alert, and an Artist Alert into a Song Alert . Delete alert (delete): Song and Artist alerts can be permanently deleted . 1. Press Menu . 2. Press to highlight Feature Settings and press the Select button . 3. Press to highlight Song/Artist Alerts and press the Select button . 4. Press to highlight Edit Song/Artist Alerts and press the Select button . 5. From the list of alerts, highlight the alert you want to edit by pressing or

. Songs are shown in yellow and artists in blue . 6. Press and release the Select button to move through the editing options and select an option:

Switch To switch the alert from an Artist Alert to a Song Alert and vice versa . Wait a moment for the confirmation screen to appear and press the Select button to confirm the switch or press Menu to cancel . Delete Delete the alert . Wait a moment for the confirmation screen to appear and press the Select button to confirm the deletion or press Menu to cancel . Off On Turn the alert off, but keep it in the list . Turn the alert on . 7. Press and hold Menu to return to the Now Playing screen . To turn all Song and Artist Alerts on or off:

You can turn all Song or Artist Alerts on or off without deleting the saved alerts . If you turn them off, you will no longer receive any Song or Artist alerts . 1. Press Menu . 2. Press to highlight Feature Settings and press the Select button . 3. Press to highlight Song/Artist Alerts and press the Select button . 4. Song/Artist Alerts should be highlighted . Press the Select button to toggle between oOn and off . 5. Press and hold Menu to return to the Now Playing screen . 37 Roady BT User Guide Using Your Roady BT To delete Song and Artist Alerts:

There are several options for deleting Song and Artist alerts:

Delete All: Deletes all Song and Artist alerts . Delete All Song Alerts: Deletes all song alerts, keeps all artist alerts . Delete All Artist Alerts: Deletes all artist alerts, keeps all song alerts . 1. Press Menu . 2. Press to highlight Feature Settings and press the Select button . 3. Press to highlight Song/Artist Alerts and press the Select button . 4. Press to highlight Delete Alerts and press the Select button . 5. Press or to select Delete All, Delete All Song Alerts, or Delete All Artist Alerts . 6. A confirmation message will be displayed . Press the Select button to confirm deletion or press Menu to cancel . 7. Press and hold Menu to return to the Now Playing screen . 38 Roady BT User Guide Using Your Roady BT Game Alerts If your subscription package includes the play-by-play sports channels for your desired sports leagues, and SiriusXM broadcasts the games, you can set your Roady BT to alert you when your favorite sports teams so that whenever SiriusXM begins broadcasting a game in which your favorite sports team is playing, you will be alerted and given the opportunity to tune to the game . IMPORTANT! A subscription package which includes the play-by-play sports channels of the desired leagues is required . For example, if you selected an alert for an NFL team, and your subscription package did not include NFL play-by-play sports channels, you cannot receive Game Alerts . We recommend you do not select alerts for teams in a league which are not included in your subscription package . Check your subscription package to confirm that it includes the play-by-play sports channels for the desired leagues before selecting any teams for alerts in the leagues . Game Alerts can be saved while you are tuned to a channel where a game is being broadcast, or you can preselect teams through the menu options . There is no limit on the number of sports teams which can be saved for Game Alerts . Alerts are displayed visually and are accompanied by an optional audible alert beep, except when you are not at the Now Playing screen . If you are not at the Now Playing screen, you will hear the audible alert beep (provided its turned on), but the visual alert will be delayed until you have returned to the Now Playing screen . When a single alert is displayed, you can press the Select button to tune to the game, or press Menu to dismiss the alert, or wait for the alert to time out . There may be occasions when several Game Alerts happen simultaneously and then a list of alerts will be displayed . These multiple alerts can be a mixture of Game, Song, and Artist alerts . You can or browse through the multiple alerts by pressing button to tune to the channel . Once you have selected an alert from the list, all other alerts in the list are dismissed . to highlight an alert, and press the Select Tips for Obtaining the Best Experience With Game Alerts Before selecting teams for Game Alerts, familiarize yourself with the following tips to help you obtain the best experience with Game Alerts:

Game Alerts normally do not occur if you are tuned to the channel which is broadcasting the game in which the selected team is playing . However, its possible that the same game may be broadcast on multiple SiriusXM channels simultaneously . If so, you will receive Game Alerts for the other channels where the game is being broadcast . You can temporarily turn off Game Alerts if desired (page 41) . Avoid selecting all teams in a league for alerts . Select only those teams you are most interested in following . 39 Roady BT User Guide Using Your Roady BT To save a team for Game Alert while listening to a game:

1. While tuned to the channel where the game is being broadcast press and hold the Select button . 2. You will be prompted to select the team for the Game Alert . Highlight your choice by pressing button, or press Menu to cancel . or and press the Select 3. A message will confirm that you have successfully saved the alert, and how many alerts you have saved . 4. Press and hold Menu to return to the Now Playing screen . To preselect (or deselect) teams for Game/Score Alerts:

1. Press Menu . 2. Press to highlight Feature Settings and press the Select button . 3. Press to highlight Game Alerts and press the Select button . 4. Press to highlight Manage Teams and press the Select button . 5. Press or to highlight a league and press the Select button . 6. Press or to highlight a team and press the Select button . to toggle the team selection . Selected teams have an X in the box to the left of the team name . 7. Continue selecting (or deselecting) teams and press Menu when complete . 8. Highlight and select another league and teams in the league, as desired . 9. When done press and hold Menu to return to the Now Playing screen . To remove all teams from Game Alerts:

All teams you had previously selected can be removed for Game Alerts . 1. Press Menu . 2. Press to highlight Feature Settings and press the Select button . 3. Press to highlight Game Alerts and press the Select button . 4. Press to highlight Remove Teams and press the Select button . 5. A confirmation message will be displayed . Press the Select button to confirm removing all teams or press Menu to cancel . 6. Press and hold Menu to return to the Now Playing screen . 40 Roady BT User Guide Using Your Roady BT To turn Game Alerts on or off:

You can turn all Game Alerts on or off without deleting the saved alerts . If you turn them off, you will no longer receive Game alerts . 1. Press Menu . 2. Press to highlight Feature Settings and press the Select button . 3. Press to highlight Game Alerts and press the Select button . 4. Game Alerts should be highlighted . Press the Select button to toggle between on and off . 5. Press and hold Menu to return to the Now Playing screen . 41 Roady BT User Guide Using Your Roady BT My Sports Zone If your subscription package includes the play-by-play sports channels for your desired sports leagues, the My Sports Zone category is a virtual category which will display sports games which are currently being broadcast on SiriusXM along with the current score and game details . You can select the sports leagues which you wish to be shown in My Sports Zone, and when a team in the league is playing a game, you can tune to a game from My Sports Zone . My Sports Zone is accessed using the category buttons . Press or category is shown . until the My Sports Zone To select or deselect leagues for My Sports Zone:

1. Press Menu . 2. Press to highlight Feature Settings and press the Select button . 3. Press to highlight My Sport Zone and press the Select button . 4. Manage Leagues will be highlighted . Press the Select button . 5. Press or to highlight a league (or All Leagues) and press the Select button . Selected leagues have an X in the box to the left of the league name . 6. Continue selecting (or deselecting) leagues and press Menu when complete . 7. Press and hold Menu to return to the Now Playing screen . Tuning a game from My Sports Zone:

1. Press or until the My Sports Zone category is displayed . 2. Press or to highlight a sports game, and press the Select button . 3. Listen to Game? will be highlighted . Press the Select button to tune to the game . 42 Roady BT User Guide Using Your Roady BT xL Lock Explicit (xL) channels can be locked so that these channels are not shown in channel lists, and are shown as locked in categories . When explicit channels are locked, if an attempt is made to tune an explicit channel, you will be prompted for the lock code . When you browse a category, the channel number and channel logo of the locked channel will be shown but not the artist and song/program information . Instead, a lock icon and Press Select to unlock channel is shown . If you tune through the channels using are skipped and are neither displayed or tuned .

, the locked channels and If you attempt to tune to a locked channel, either by using Direct Tune or through the category list, youll be prompted to enter the 4-digit lock code . When the correct code is entered, youll be able to tune to and listen to the channel, and all locked channels will become unlocked and remain unlocked until you turn Roady BT Off and back On . In the category list, the previously locked channels will show an unlocked icon

. To turn xL Lock on or off:

1. Press Menu . 2. Press to scroll to and highlight xL Lock Settings . Press the Select button . 3. If this is the first time you are turning on Parental Controls, xL Lock will be highlighted . Press the Select button . You will be prompted to select a 4-digit lock code:

i . For each digit, press one of the 0-9 keys (or press or to select digits and then press to advance to the next digit .) Press if you need to go back and edit a previous digit . ii . When you have selected all 4 digits of your lock code press the Select button . iii . The Lock Code Confirmation screen will be displayed . For your records, write down the lock code you have selected . Press the Select button . Continue with step 5 . 4. If you had previously selected a 4-digit lock code you will be prompted to enter your existing lock code:

i . For each digit, press one of the 0-9 keys (or press or to select digits and then press to advance to the next digit .) Press if you need to go back and edit a previous digit . ii . When you have selected all 4 digits of the lock code press the Select button . 5. At the xL Lock Settings screen, xL Lock will be highlighted . Press the Select button to toggle the xL lock setting on or off . 6. Press and hold Menu to return to the Now Playing screen . To change the xL Lock code:

1. Press Menu . 2. Press to scroll to and highlight xL Lock Settings . Press the Select button . 43 Roady BT User Guide Using Your Roady BT 3. Press to scroll to and highlight Change Lock Code and press the Select button . 4. You will be prompted to enter your existing 4-digit lock code . For each digit, press one of the 0-9 keys (or press if you need to go back and edit a previous digit . or to select digits and then press to advance to the next digit .) Press 5. When you have entered all 4 digits of the existing lock code press the Select button . 6. You will be prompted to enter a new 4-digit lock code . For each digit, press one of the 0-9 (or to select digits keys and then press to advance to the next digit .) Press if you or press need to go back and edit a previous digit . 7. The Lock Code Confirmation screen will be displayed . For your records, write down the lock code you have selected . Press the Select button . 8. Press and hold Menu to return to the Now Playing screen . To listen to a locked channel:

There are two ways to tune to a channel which has been locked . The first is to directly tune to the locked channel using Direct Tune, and the second is to select the locked channel from a category list . 1. Directly tune a channel, or select the locked channel from a category list:

To directly tune to a locked channel:

i . Press and hold the Favorite Bank/Direct Tune Button and enter the channel number using the 0-9 keys . To select a locked channel from the category list:

i . Press or to view the category list of the locked channel to which you wish to tune . ii . Press to scroll to and highlight the locked channel . Press the Select button . 2. You will be prompted to enter your existing 4-digit lock code . For to select digits each digit, press one of the 0-9 keys (or press and then press to advance to the next digit .) Press if you need to go back and edit a previous digit . or 3. When you have entered all 4 digits of the lock code, press the Select button . If your lock code is correct the channel will be tuned . All locked channels will become unlocked and will remain unlocked until you turn Roady BT Off and back On . In the category list, the previously locked channels will show an unlocked icon

. 44 Roady BT User Guide Using Your Roady BT Day/Night Brightness Selection The display screen on the Roady BT can be toggled for day and night brightness settings . To switch between day and night brightness settings:

1. Press the Day/Night Brightness button to toggle between the day and night mode . To adjust the brilliance of the day or the night setting:

1. Press Menu (or press and hold the Day/Night Brightness button and skip to step 3) . 2. Press to highlight Display Settings and press the Select button . 3. Press to highlight Brightness - Day or Brightness - Night and press the Select button . 4. Press or to adjust the screen brilliance and press the Select button to save the setting . 5. Press and hold Menu to return to the Now Playing screen . Night Comfort Mode Night Comfort Mode will automatically turn off the display screen on Roady BT after a period of 5, 15, 30, or 60 minutes when Roady BT is in the night brightness mode . Press any button when in night comfort mode to turn the display screen back on . To adjust Night Comfort Mode:

1. Press Menu (or press and hold the Day/Night Brightness button and skip to step 3) . 2. Press to highlight Display Settings and press the Select button . 3. Press to highlight Night Comfort Mode . 4. Press the Select button to toggle between off, 5, 15, 30, or 60 minutes . 5. Press and hold Menu to return to the Now Playing screen . 45 Roady BT User Guide Using Your Roady BT TuneStart The TuneStart feature plays the current song from the beginning when you tune to a music channel which you have saved as a smart favorite channel . TuneStart is on by default . TuneStart also occurs if you tune back to the channel that was tuned immediately prior to the currently tuned channel, either by pressing Jump, or by directly tuning the channel . When a TuneStart occurs, the TuneStart icon will be displayed for 10 seconds on the Now Playing screen to show that a TuneStart has occurred . Should you wish to return to the live broadcast, press and hold Play/Pause . In order for a TuneStart to occur, the beginning of the song must be present in the TuneStart memory . If Roady BT is powered on after a song has already begun to be broadcast, a TuneStart will not be possible for that song . TuneStart will only occur once per song . For example, if you tune to smart favorite music channel A1 and a TuneStart occurs, then tune channel B1, and then tune back to channel A1 while the same song is still playing on channel A1, a TuneStart will not occur . However, if you want to hear the song from the beginning, you can always press and release to return to the beginning of the song . NOTE: Certain music channels are not eligible for TuneStart due to the way in which they are broadcast . While these music channels can be saved as smart favorites, TuneStart will not occur for these channels . To turn TuneStart on or off:

1. Press Menu . 2. Press to scroll to and highlight Feature Settings and press the Select button . 3. Press to scroll to and highlight TuneStart and press the Select button . 4. Press the Select button to toggle between on and off . 5. Press and hold Menu to return to the Now Playing screen . 46 Roady BT User Guide Configuring Your Roady BT Before attempting to change any of Roady BTs settings you should park your vehicle in a safe location . Radio ID Radio ID is where the Radio ID and Radio Information is displayed . The Radio ID is an 8 character alphanumeric ID which uniquely identifies the Radio, and is used for the subscription process . Radio Information shows subscription state and software revisions . To display the Radio ID:

1. Press Menu . 2. Radio ID will be highlighted . Press the Select button to display the Radio ID . 3. Press and hold Menu to return to the Now Playing screen . To display Radio Information:

1. Press Menu . 2. Radio ID will be highlighted . Press the Select button . 3. Press to display the Radio Information screen . 4. Press and hold Menu to return to the Now Playing screen . Online Product Support Online Product Support displays a QR code and website URL where you can go to find additional support information for Roady BT . Using a mobile device such as your phone, scan the QR code which is displayed or use a browser to go to the website for additional assistance . SiriusXM also has a dedicated email address where you can receive personalized support from SiriusXM experts:

roadybt@siriusxm .com . 47 Roady BT User Guide Configuring Your Roady BT Audio Settings Audio Settings is where the Audio Output for Roady BT is selected (Aux, Bluetooth, or FM), and where the Audio Level can be adjusted . To select the Audio Output:

Detailed instructions for each type of audio output may be found in the following sections:

Aux: Refer to Option 1: Aux Audio Cable Installation Instructions on page 20 for detailed information . Bluetooth: Refer to Option 2: Bluetooth Installation Instructions on page 21 for detailed information . FM: Refer to Option 3: FM Installation Instructions on page 27 and the sections below for detailed information . (The FM audio option requires an FM Direct Adapter which is sold separately .) The following sections contain further detail for the FM audio option, and assumes that you have selected FM as your audio output option . To find available FM channels in your area:

You need to find an available FM channels that are not being used by an FM radio station in your area . When you tune your vehicles FM radio to an available channel, you should only hear static or silence not talk or music . Once you have found an available FM channel, youll need to tune Roady BT and your vehicles radio to the same FM channel to receive the SiriusXM audio through your vehicles radio . We recommend one of the following methods to find an available FM channel:

1. Use the SiriusXM FM Channel Finder Use the SiriusXM FM Channel Finder at www .siriusxm .com/fmchannel . Go to the website and enter your zip code . The Channel Finder will suggest a list of available FM channels in your area . For convenience, write down or print out the list . Tune Roady BT to a SiriusXM channel (or to channel 1, if its not activated) . Turn on your vehicles FM radio . Pick the first FM channel on your Channel Finder list and tune the FM radio to that channel . If you do not hear a local FM station broadcast, then tune Roady BT to the same FM channel . (Refer to To set and select an FM Channel: on page 49 .) You should hear the SiriusXM audio through your vehicles radio . If you are satisfied with the sound quality, youre done! If this FM channel doesnt work well for you, work down the list until you find an FM channel that allows you to hear the SiriusXM audio clearly . OR 2. Manually tune through your local FM channels Manually tune through your local FM channels on your vehicles FM radio . Turn on your vehicles FM radio . Start at 88 .1 and use the Manual tune function on your vehicles FM radio to tune through each FM channel one-by-one (88 .1 followed by 88 .3 etc .) to locate channels that arent being used by a local FM radio station . Write down each FM channel that has only static or silence on it, until you reach 107 .9 . Once you have created your list of available FM channels, you will need to find the one that provides the best match for Roady BT . 48 Roady BT User Guide Configuring Your Roady BT Tune Roady BT to a SiriusXM channel (or to channel 1, if its not activated) . Pick the first FM channel on your list and tune the FM radio to that channel . Then tune Roady BT to the same FM channel . (Refer to To set and select an FM Channel: on page 49 for instructions on how to do this .) You should hear the SiriusXM audio through your vehicles radio . If you are satisfied with the sound quality, youre done! If this FM channel doesnt work well for you, work down the list until you find an FM channel that allows you to hear the SiriusXM audio clearly . NOTE! You may find an FM channel with static or silence that does not work with Roady BT . It is possible that some type of inaudible interference is present that prevents reception of the SiriusXM audio . Your only options are to use another FM channel or a different audio connection method . TIP! If you regularly drive from one location to another, such as your daily commute, you may need to use different FM channels along your route for best performance . If this is the case, we recommend saving the best FM channels as presets on your FM radio and Roady BT . Then you simply select and match the best channel for the area you are in . TIP! It will be much more difficult to find available FM channels in large cities than in most suburban or rural locations . A direct audio connection using Aux or Bluetooth, or professional installation is your best solution if you drive in or near large metropolitan areas . NOTE! The SiriusXM FM Channel Finder relies on data from the Federal Communications Commission . The data may not reflect the latest stations in your area . In addition, local geography and weather conditions can impact reception, so your results may be different from the list . NOTE! The performance of FM radios are different, based on manufacturer and vehicle style . Some may not work well with the type of FM transmitter used by Roady BT . This is why we recommend a using the Aux or Bluetooth if they can be used in your vehicle . Professional installation can also resolve almost any performance issue . To set and select an FM Channel:

Roady BT allows you to easily store (i .e ., preset) up to 5 different FM channels . At any time, you can select any one of these 5 FM presets to hear SiriusXM through your existing vehicle radio . Having a choice of 5 FM presets also makes it easy to switch to the appropriate FM channel as you travel from one area to another . Each FM preset is stored in its own storage location . You can easily add or edit the FM preset in any one of the 5 storage locations . IMPORTANT! Roady BT and the vehicles FM radio need to be tuned to the same FM channel in order to hear the audio . TIP! The FM 1 storage location is preset with FM channel 97 .9 . 1. Press Menu . 2. Press to highlight Audio Settings and press the Select button . 3. Press to highlight FM Channels and press the Select button . 4. Press or to highlight to scroll to and highlight the storage location (FM 1 to FM 5) you want as a preset and press the Select button . You can choose among the following options:

i . If the chosen storage location is empty (denoted by ---), or if the storage location contains the FM preset currently being used

(denoted by current), then the FM channel tuning screen is displayed . ii . If the chosen storage location has an FM preset that is not 49 Roady BT User Guide Configuring Your Roady BT currently being used, and you want to edit it, Edit Channel is highlighted . Press the Select button . The FM channel tuning screen is displayed . iii . If the chosen storage location has an FM preset that is not currently being used, and you want to start using it, press to highlight Start Using and press the Select button . Skip to step 7 . 5. Press and to tune to the desired FM channel in steps of .2, i .e ., 99 .3 to 99 .5 . Press to tune to the desired channel in steps of 1, i .e ., 99 .3 to 100 .3 . Press the Select button to select the FM channel . and 6. If you are editing the storage location that has the current FM preset, skip to step 7 . Otherwise, Start Using will be highlighted . Press the Select button . NOTE! You can also set an FM preset without having to start using it right away . Just press Menu and exit the screen . 7. The chosen FM channel will be confirmed on the display screen and Roady BT will tune to that FM channel . 8. Set your vehicles FM radio to same FM channel . IMPORTANT! Youll first need to find a suitable FM channel that is unused or available in your area . To select a different FM preset:

FM presets make it easy to choose a new FM channel from the saved presets . FM presets are used when you use FM as your audio connection . 1. Press Menu . 2. Press to highlight Audio Settings and press the Select button . 3. Press to highlight FM Channels and press the Select button . 4. Press or to highlight the desired FM channel and press the Select button . 5. Press to highlight Start Using and press the Select button . 6. Press and hold Menu to return to the Now Playing screen . 7. Set your vehicles FM radio to the same FM channel . IMPORTANT! You need to ensure that your vehicles FM radio is tuned to the same FM channel as Roady BT . Audio Level The audio level of Roady BT can be adjusted when an audio connection is made between Roady BT and the vehicles radio/headunit . Audio level is used to adjust Roady BTs volume level to match the volume of other audio sources you may use, such as a other apps, CD player, FM radio, etc . Do not use the audio level as a volume control . Use the volume control on your vehicles radio/

headunit instead . 50 Roady BT User Guide Configuring Your Roady BT To adjust the Audio Level:

1. Press Menu . 2. Press to highlight Audio Settings and press the Select button . 3. Press to highlight Audio Level and press the Select button . 4. Press or to adjust the audio level and press the Select button to confirm the new setting . 5. Press and hold Menu to return to the Now Playing screen . Display Settings Display Settings is where the Day and Night Brightness, Night Comfort Mode, and Text Scrolling options are adjusted . Day and Night Brightness Refer to Day/Night Brightness Selection on page 45 for detailed information . Night Comfort Mode Refer to Night Comfort Mode on page 45 for detailed information . Text Scrolling When an artists name or a song title is too long to be completely displayed on the Now Playing screen, the artist name and/or song title will scroll after a few seconds . This feature can be adjusted as follows:

Off Once Metadata never scrolls (default) . Metadata scrolls once and then does not scroll again until the metadata changes . Continuous Metadata will continuously scroll . 1. Press Menu . 2. Press to highlight Display Settings and press the Select button . 3. Press to highlight Text Scrolling . 4. Press the Select button to toggle between off, once, and continuous . 5. Press and hold Menu to return to the Now Playing screen . 51 Roady BT User Guide Configuring Your Roady BT Channel Browsing/Tuning Settings Display Settings is where the Channel Browsing Auto Select, Channel Tuning, and Show/Hide Categories options are adjusted . Channel Browsing Auto Select Roady BT is configured to automatically tune channels when browsing a category list so that when you highlight a channel in the list and pause for a few seconds, the channel is tuned . This feature can be turned off so that channels are not tuned automatically, if desired . 1. Press Menu . 2. Press to scroll to and highlight Channel Browsing/Tuning Settings . Press the Select button . 3. Press to scroll to and highlight Channel Browsing Auto Select . 4. Press the Select button to toggle between on and off . 5. Press and hold Menu to return to the main display screen . Channel Tuning Channel Tuning controls the way channels are displayed when browsing through channels using or

, and when browsing channels in category browsing . There are two different channel tuning modes, Tune by Channel (default) and Tune by Category . Tune by Channel: Channels are displayed in ascending or descending numerical order, regardless of their category . The numerical channel numbers are shown when channels in a category are viewed in list mode . This is the default method . Tune by Category: Channels are grouped and displayed according to their category (Rock, Pop, Family, etc .), regardless of their numerical channel number . Once you have scrolled through all the channels in a category, the channels in the next category are shown . 1. Press Menu . 2. Press to highlight Channel Browsing/Tuning Settings and press the Select button . 3. Press to highlight Channel Tuning . 4. Press to scroll to and highlight Tune by Channel or Tune by Category . Press the Select button . 5. Press and hold Menu to return to the Now Playing screen . Show/Hide Categories Categories can be hidden if you do not wish to have a category shown in the category carousel . Channels in hidden categories may still be tuned by using Direct Tune to enter the channel number . To show or hide a category:

1. Press Menu . 52 Roady BT User Guide Configuring Your Roady BT 2. Press to highlight Channel Browsing/Tuning Setting and press the Select button . 3. Press to highlight Show/Hide Categories and press the Select button . 4. Press or to highlight a category and press the Select button to toggle the show/hide selection . Categories to be hidden have an X in the box to the left of the category name . 5. Continue selecting (or deselecting) categories and press Menu when complete . 6. Press and hold Menu to return to the Now Playing screen . To show all categories:

1. Press Menu . 2. Press to highlight Channel Browsing/Tuning Setting and press the Select button . 3. Press to highlight Show/Hide Categories and press the Select button . 4. If any categories have been hidden, Show All Categories will be highlighted . Press the Select button to show all categories . 5. Press and hold Menu to return to the Now Playing screen . Feature Settings Feature Settings is where the Audible Beep, Song/Artist Alerts, Game Alerts, My Sports Zone, and TuneStart options are adjusted . Audible Beep Audible Beep controls the beep that is heard when an advisory message or alert screen is displayed . The audible beep can be turned on or off . If the audible beep is turned off you will still continue to receive any associated visual alert . 1. Press Menu . 2. Press to highlight Feature Settings and press the Select button . 3. Press to highlight Audible Beep . 4. Press the Select button to toggle between on and off . 5. Press and hold Menu to return to the Now Playing screen . Song/Artist Alerts Refer to Song/Artist Alerts on page 36 for detailed information . 53 Roady BT User Guide Configuring Your Roady BT Game Alerts Refer to Game Alerts on page 39 for detailed information . My Sports Zone Refer to My Sports Zone on page 42 for detailed information . TuneStart Refer to TuneStart on page 46 for detailed information . xL Lock Setting Explicit (xL) channels can be locked so that these channels are not shown in channel lists, and are shown as locked in categories . Refer to xL Lock on page 43 for detailed information . Signal Indicator For best reception the Magnetic Mount Antenna should have an unobstructed view of the SiriusXM satellites . In large cities, there are terrestrial transmitters (ground repeaters) to help supplement the signal coverage . Your Roady BT can display the received strength of the satellite and terrestrial signals being received . 1. Press Menu . 2. Press to highlight Signal Indicator and press the Select button . 3. The Satellite and Terrestrial bars show the strength of the signal being received . 4. If necessary, reposition the antenna if you are having trouble receiving the signal . Be sure your vehicle is outside with an unobstructed view of the sky . 5. Press and hold Menu to return to the Now Playing screen . Auto Shut Off Auto Shut Off will automatically turn Roady BT off after 8 hours of inactivity, i .e ., when no buttons have been pressed for 8 hours . This feature prevents the vehicle battery from being accidentally discharged if you forgot to turn Roady BT off . Auto Shut Off is on by default, but can be disabled if the feature is not desired . When Roady BT is about to shut off, an advisory will be displayed . If you wish to continue listening, press any button to cancel the auto shut off . 1. Press Menu . 2. Press to highlight Auto Shut Off and press the Select button . 54 Roady BT User Guide Configuring Your Roady BT 3. Auto Shut Off will be highlighted . Press the Select button to toggle between enabled or disabled . 4. Press and hold Menu to return to the Now Playing screen . Factory Settings Configuration changes and personal settings can be removed with a factory reset, and Roady BT returned to its original out-of-the-box condition . Please note that a factory reset will not change or affect Roady BTs subscription status . NOTE! Factory Settings permanently removes all configuration and personal settings and cannot be undone . In particular, the audio connection configuration will have to be done again after a factory reset . 1. Press Menu . 2. Press to scroll to and highlight Factory Settings and press the Select button . 3. A confirmation screen will be displayed . If you are certain that you want to reset your Roady BT to the factory settings, press the Select button to proceed, or press Menu to cancel . 4. Press and hold Menu to return to the Now Playing screen . 5. Note that the No Audio Connection message will be displayed on the Now Playing screen because the audio output selection has been reset to none selected . Refer to Step 6: Connect the Audio on page 19 for audio connection options . Software Update Software Update is where a new software release for Roady BT is installed . Until a software update has been copied to the Roady BT display, Software Update is not selectable . There are several requirements for a software update:

1. A special cable (which will be made available on the Roady BT product support page) . 2. A Microsoft Windows based computer, or an Apple computer, with Internet access, is required for downloading the software update from SiriusXM . Also, a USB A-type connection on the computer is required to copy the software update to the Roady BT display . Detailed information will be made available on the Roady BT product support page if a software update is available . 55 Roady BT User Guide Configuring Your Roady BT Demo Mode Roady BT has a demo mode that can play that shows some of its features . The ability for Roady BT to enter demo mode is enabled by default . If you dont want Roady BT to enter the demo mode you can disable the demo feature . You can enable it again at another time, if desired . To enable or disable Demo Mode:

1. Press Menu . 2. Press to highlight Demo Mode and press the Select button . 3. Status will be highlighted . Press the Select button to toggle between enabled or disabled . 4. Press and hold Menu to return to the Now Playing screen . To enter Demo Mode 1. Press Menu . 2. Press to highlight Demo Mode and press the Select button . 3. Press to highlight Enter Demo Mode and press the Select button . 4. Roady BT will begin a 10 second countdown before entering Demo Mode . Press the Select button if you want to cancel entering Demo Mode . 5. To exit Demo Mode press and hold the Select button for 10 seconds until the Demo Mode menu is displayed . 6. Press and hold Menu to return to the Now Playing screen . 56 Roady BT User Guide Configuring Your Roady BT Regulatory Information Regulatory Information displays specific information about the radio . 1. Press Menu . 2. Press to highlight Regulatory Information and press the Select button . 3. Press and hold Menu to return to the Now Playing screen . 57 Roady BT User Guide Troubleshooting Roady BT has been designed and built to be trouble-free but if you experience a problem, try this:

Check that all connections are firm and secure . Make sure the vehicle power socket is clean and free of corrosion . Make sure you have connected Roady BT as described in this User Guide . Verify that the Intelligent Power Adapter is plugged into the vehicles cigarette lighter or power adapter socket, and that the LED on the Intelligent Power Adapter is lit (on) . If not, your vehicle may need to be running to provide power to the socket . If you see this on the screen:

Try this:

Acquiring Signal Make sure that the vehicle is outdoors with a clear view of the Check Antenna Connection sky . Make sure the Magnetic Mount Antenna is mounted outside of the vehicle . Move the antenna away from any obstructed area . For example, if you are parked in an underground garage, you should receive a signal after leaving the garage . Make sure that the antenna cable is firmly and securely plugged into the Intelligent Power Adapter . Make sure the cable is not bent or broken . Turn Roady BT Off, then On, to reset this message . If the message persists, most likely the Magnetic Mount Antenna cable has been damaged . Replace the antenna . Channel Off Air The channel youve selected is not currently broadcasting . Tune Loading Updating to another channel . Your Roady BT is acquiring audio or program information This message usually goes away in a few seconds . Your Roady BT is updating with the latest encryption code . Wait until the update is done . You may be trying to tune to a channel that is blocked or unavailable . Tune to another channel . No program information, such as artist name, song title, or channel exists . No Audio Connection An audio option must be selected, and the audio connection made before audio can be heard . Refer to Step 6: Connect the Audio on page 19 for instructions on selecting and installing an audio connection . If this happens:

Try this:

You do not receive all the channels to which you subscribed Ensure that you have subscribed to the service by following the steps in Activation on page 29 . Go to www .siriusxm .com/refresh and follow the directions to refresh your Radio . Call 1-866-635-2349 for further assistance . Audio sounds too soft Raise the volume of your vehicles radio/headunit or increase the audio level of your Roady BT until the sound quality improves . Refer to Audio Level on page 50 . 58 Roady BT User Guide Troubleshooting If this happens:

Try this:

Audio fades or has static when listening No audio when using the FM audio connection option No song title or artist name is displayed Bluetooth will not pair and connect Check all cables for a firm and secure connection . If you are using the FM audio connection option to listen via your vehicles FM radio, and the problem persists, it most likely is interference from another commercial or broadcast FM station . You will need to find an unused or available FM channel in your area . Refer to To find available FM channels in your area: on page 48 . Check that your Roady BT and your vehicles FM radio are tuned to the same FM channel . The information may not be available or updates may be in progress . Please read the information in Option 2: Bluetooth Installation Instructions on page 21, and also refer to the Roady BT FAQs for Bluetooth referenced there . The demo is playing Press and hold the Select button for 10 seconds to exit Demo Mode . You can disable Demo Mode . Refer to Demo Mode on page 56 . 59 Roady BT User Guide Product Specifications System Power Requirements: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16 V DC, 500 mA (max) Operating Temperature: . . . . . . . . . . . . . . . . . . . . . . . . . . . . -4F to +140F (-20C to +60C) Audio Output: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 .0 Vrms (max) Roady BT Display Dimensions: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 .0 in (W) x 2 .7 in (H) x 0 .64 in (D) 128 mm (W) x 68 mm (H) x 16 .35 mm (D) Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 .1 oz (117 g) Intelligent Power Adapter Dimensions: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 .7 in (W) x 2 .1 in (H) x 1 .2 in (D) Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Input / Output: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Audio Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Antenna Connector: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SMB male FM Connector: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/32 in (2 .5 mm) female 94 mm (W) x 54 mm (H) x 31 mm (D) 1 .9 oz (57 g) 1/8 in (3 .5 mm) female 1/8 in (3 .5 mm) female Vehicle Antenna Type: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SiriusXM Magnetic Mount Connector: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SMB female, right angle Cable Length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Approximately 23 ft (7 .0 m) Aux Audio Cable Connectors: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/8 in (3 .5 mm) stereo male to 1/8 in (3 .5 mm) stereo male Cable Length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Approximately 4 ft (1 .2 m) Display Cable Connectors: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USB Micro-B male to male Cable Length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Approximately 6 ft (1 .8 m) 60 Roady BT User Guide Patent and Environmental Information Patent Information It is prohibited to, and you agree that you will not, copy, decompile, disassemble, reverse engineer, hack, manipulate, or otherwise access and/or make available any technology incorporated in this product . Furthermore, the AMBE voice compression software included in this product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc . The software is licensed solely for use within this product . The music, talk, news, entertainment, data, and other content on the Services are protected by copyright and other intellectual property laws and all ownership rights remain with the respective content and data service providers . You are prohibited from any export of the content and/or data (or derivative thereof ) except in compliance with applicable export laws, rules and regulations . The user of this or any other software contained in a Sirius XM Radio Inc is explicitly prohibited from attempting to copy, decompile, reverse engineer, hack, manipulate or disassemble the object code, or in any other way convert the object code into human-readable form . Environmental Information Follow local guidelines for waste disposal when discarding packaging and electronic appliances . Perchlorate Material - special handling may apply . See www .dtsc .ca .gov/hazardouswaste/perchlorate

(Applicable to California, U .S .A .) 61 Roady BT User Guide FCC Statements FCC Statement The user is cautioned that changes or modifications not expressly approved by Sirius XM Radio Inc . can void the users authority to operate this device . This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions:

1. This device may not cause harmful interference . 2. This device must accept any interference received, including interference that may cause undesired operation . This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules . These limits are designed to provide reasonable protection against harmful interference in a residential installation . This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the installation instructions, may cause harmful interference to radio communications . However, there is no guarantee that interference will not occur in a particular installation . If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna of the affected receiver . Increase the separation between the SiriusXM equipment and the affected receiver . Connect the SiriusXM equipment into an outlet on a circuit different from that to which the affected receiver is connected . Consult the dealer or an experienced radio/TV technician for help . Part 15 Device Warning: Modifications by anyone other than the party responsible for compliance with the FCC rules may void the authority granted under FCC regulations to operate this device . FCC RF Exposure Statement This Intelligent Power Adapter complies with FCC RF exposure limits set forth for an uncontrolled environment . This Intelligent Power Adapter should be installed and operated with a minimum distance of 20 cm (8 in) from your body . WARNING! The FCC and FAA have not certified this Satellite Radio Receiver use in any aircraft

(neither portable nor permanent installation) . Therefore, Sirius XM Radio Inc . cannot support this type of application or installation . 62 Roady BT User Guide Copyrights and Trademarks IMPORTANT NOTICE: REQUIRED SUBSCRIPTION Hardware and subscription sold separately . Activation fee, other fees, and taxes required . All fees, content and features are subject to change . Our satellite service is available only to those at least 18 and older . Installation instructions are provided . You must determine if you have the knowledge, skills and ability required to properly perform installation . Professional installation recommended . You must ensure that all products are installed in adherence with local laws and regulations and in such a manner as to allow a vehicle to be operated safely and without distraction . SiriusXM product warranties do not cover the installation, removal or reinstallation of any product . 2022 SiriusXM Radio Inc . SiriusXM, Pandora and all related logos are trademarks of Sirius XM Radio Inc . and its respective subsidiaries . Other marks, channel names and logos are the property of their respective owners . All rights reserved . All rights reserved . The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc . and any use of such marks by SiruisXM is under license . WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm . 63 Roady BT User Guide Sirius XM Radio Inc . 1221 Avenue of the Americas, 36th Floor New York, NY 10020 1 .866 .635 .2349 siriusxm .com 2022 Sirius XM Radio Inc . SXVRBT1QSG 220204a

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6814193.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case 3. Menu - Page 1 3.0 Menu Structure 3.0.1 First Level Second Level Third Level Fourth Level Fih Level Shi Menu Map Radio ID Audio Output [toggle: None Selected/Bluetooth/AUX/FM]

Bluetooth Sengs

[toggle: on/o ]

Bluetooth

[Shown only when Bluetooth is the selected Add New Bluetooth Device Audio Output]

Radio Information Acvate Radio Radio ID Audio Sengs Display Sengs FM Channels [Shown only when FM is the selected Audio Output]

Audio Level Brightness - Day Brightness - Night Night Comfort Mode Text Scrolling [toggle: o/once/connuous]

Channel Browsing/Tuning Sengs Channel Browsing Auto Select

[toggle: on/o]

Channel Tuning Show/Hide Categories Feature Sengs Audible Beep Song/Arst Alerts

[toggle: on/off ]

Bluetooth Device Class [toggle: default/extended]

BT Device 1 BT Device 2 BT Device ()

[on/o toggle]

FM Transmier [toggle: on/o]

FM Channels Day Brightness Seng Night Brightness Seng

[toggle: o/5 minutes/15/30/60]

Tune by Channel Tune by Category Show All Categories Pop Rock Hip Hop/R&B ()

[toggle: on/off ]

Song/Arst Alerts Edit Song/Arst Alert Audio Sengs Delete Alerts

[song/arst alert list]

[toggle: o/on/sw/del]

Delete All Alerts Delete All Song Alerts Delete All Arst Alerts

[on/o toggle]

3.0.2 3.0.3 3.0.4 Game Alerts Game Alerts [toggle: on/off ]

Manage Teams My Sports Zone Remove All Teams Manage Leagues NFL MLB NHL ( NBA, CFB, CBK, WCBK) Teams A-Z Teams A-Z Teams A-Z All Leagues NFL MLB NHL ( NBA, CFB, CBK,WCBK) Remove All Leagues Erase All Favorites (x of 20) Erase All Favorites in Bank A Erase All Favorites in Bank B TuneStart Album Art Erase Favorite Channels

[toggle: on/off ]

[toggle: on/off ]

[toggle: on/off ]

xL Lock Change Lock Code Status

[toggle: enabled/disabled]

Status [toggle: enabled/disabled]

Enter Demo Mode xL Lock Seng Signal Indicator Auto Shut O Factory Sengs Soware Update Demo Mode Regulatory Informaon Page 6 3. Menu - Page 24 3.14 Diagnostics & NAND Update - NAND Update 3.14.1 3.14.2 3.14.4 3.14.6 Copy software update to Shift DCU:

1. Disconnect the Shift DCU from the CLA 2. Connect the Shift DCU to a computer with a USB cable 3. Shift is recognised as a USB drive 4. Copy the NAND SW update to Shift DCU (drag & drop) 5. Eject Shift device from computer 6. Reconnect Shift DCU to the CLA 7. Power Shift on Highlight Radio ID Press Select button 3.14.3

- Default timeout to Now Playing screen

- Press Menu to Now Playing screen

- No timeout

- Press Menu to previous screen 1. Press and hold Direct button for 3 seconds 2. Press and release Right button 3. Press and hold 6 button until Diagnostics menu 3.14.5 Highlight NAND Update Press Select button 3.14.7

- NAND update is gray and not selectable if no NAND software update file is found

- Current NAND version is displayed

- No timeout

- Press Menu to return to the Menu screen Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magn a 3.14.10 3.14.12 3.14.13 3.14.14

- Radio automatically powers off

- Radio automatically powers back on

- Radio powers on to the preview channel 1 Is the NAND file valid and the next version?

Yes 3.14.8 No 3.14.9

- New NAND software is installed

- Installation icon is animated during installation

- No timeout 3.14.15 NAND installation completes 3.14.11 Press Select button 3.14.16

- No timeout

- Press Menu to Menu screen 3.15 Regulatory Information 3.14.2 Highlight Regulatory Information Press Select button 3.14.3

- Default timeout to Now Playing screen

- Press Menu to Now Playing screen

- Default timeout to Now Playing screen Page 29 1 2 3 4 5 A B C D 9 8 3 Note 1. Material : 56T white card 2. Drawing Perspective : Printing Side 3. Die Cut : Cut in Front 4. Color : 5C(4C+PT293C)/0C 5. Varnish laminate : Aqueous coating 6. Outer Diameter : 179.777.7214 mm 7. Tolerance : 1 mm 8. Burst Strength : kgf/cm 9. Adhesive : Yes / No 10. Flute / Grain Direction :

REV. Modification Description B / 0 56T A / 0 (34.GUPSS.02JFF1) Giftbox_56T white card

. 8 1 4

. 7 6 7 MODEL: SXVRBT1 Glue on Front 107.5 103.6 2 2 MODEL: SXVRBT1

. 2 7 7 Satellite radio designed for in-vehicle use Warranty statement inside. Details also at siriusxm.com/productwarranty or call 1.855.842.3506

. 3 4 G U P S S 0 3 2 0 1

. Roady BT Vehicle Satellite Radio F E AT U R E S 5 6 7 V E R S AT I L E M O U N T I N G O P T I O N S 1 Satellite radio designed for in-vehicle use 4 3 2 8 Magnetic Adapter with Dash Mount 1. Single Wire Connection 4. Channel Presets to the display to save your favorite 20 channels 2. Pause, Rewind, & Replay 5. Get Alerts*

live satellite radio 3. TuneStart automatically start songs from the beginning on your favorite channels when your favorite songs, artists, or sports teams are playing on another channel 6. Bluetooth Audio Capability**

7. Day/Night Settings easily switch between day and night brightness 8. Aux and FM Audio Connections to stream SiriusXM to your vehicles audio system Placed EPS URL link:

https://qrcodes.pro/NpgY1I Magnetic Adapter with Vent Mount CONTENTS Roady BT Display Intelligent Power Adapter Display Cable Aux Audio Cable 15.4 Magnetic Adapter Vent & Dash Mounts Magnetic Mount Antenna Scan for latest offers & to activate or visit siriusxm.com/activatenow Additional documents available at siriusxm.com/guides This product, and its respective promotions, intended for use in the contiguous US. SiriusXM subscriptions are sold separately. See our Customer Agreement for complete terms at siriusxm.com, including how to cancel, which includes calling SiriusXM at 1-866-635-2349. See bottom panel for DETAILS with important notices and safety information. 179.15 Magnetic Adapter Mount Compatible with alternative mounting solutions (sold separately) 77.2 Rewind & Replay Live Radio 179.15 Magnetic Mounting Options Bluetooth Compatible WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. MODEL: SXVRBT1 Subscription sold separately. See DETAILS on bottom panel. Radio ID AREA FOR LABEL 35MM X 25.5MM Made in Taiwan

(ROADYBT.V.07.23) Retail Packaging IC ID: 5750A-SXVRBT2C FCC ID: RS2SXVRBT2 CONTAINS Please Recycle PANTONE 293 C

* Access to Alerts depends on subscription plan. ** Requires vehicle audio to support Bluetooth streaming audio. Requires an FMDA25 FM adapter, sold separately. DETAILS: Hardware and subscription sold separately.Activation fee, other fees, and taxes required. All fees, content, and features are subject to change. Our service is available only to those at least 18 and older. Installation instructions are provided. You must determine if you have the knowledge, skills, and ability required to properly perform installation. Professional installation recommended. You must ensure that all products are installed in adherence with local laws and regulations and in such a manner as to allow a vehicle to be operated safely and

. without distraction. SiriusXM product warranties do not cover the installation, removal, or reinstallation of any product. 2022 Sirius XM Radio Inc. Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. Other marks, channel names and logos are the property of their respective owners. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by SiriusXM is under license. All rights reserved. 6 8 3

. 6 8 5

. 6 8 5 527.6 Vehicle Everything you want to hear. 3 1 2 Sports Talk Comedy News 76.7 Listen on the SXM App U18 D e s c r i p t i o n o f p r o p e r t i e s Glue on Front Glue on Back Name Date Edan 22-11-30 Edan 22-08-04 Score (Crease) Die Cut Perforation V-groove 55 Cut Crease Reverse Crease Kiss Cut Reference FUDY Printing Co.,Ltd. Product No. 221130_SIR.15285 Roady BT Package 2022_D2_FINAL_Callouts(En) Part No. 34.GUPSS.03201(FD.....) REV. B / 0 Product Name SIR.15285 Roady BT Package 2022_D2_FINAL_Callouts_Giftbox Designed by Edan Checked by Edan/Kira Approved by Shaun 2022-11-30 2023-07-10 2023-07-10 Scale Sheet Unit 1 : 1 1 / 1 mm QD2-01-09-A1 Music

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6804054.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6811591.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Sirius XM Radio Inc. 1500 Eckington Place NE Washington, DC 20002 T: 202-380-4000 F: 202-380-4500 Element Materials Technology Washington DC LLC 7185 Oakland Mills Road Columbia, MD 21045 Confidentiality request regarding the application for certification for the Sirius XM Roady BT, Model Number: SXVRBT1; FCC ID: RS2SXVRBT2 To Whom It May Concern:

Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request long term confidential treatment of information accompanying this application as outlined below:

Schematic Diagrams Block Diagrams Operational Descriptions Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Also, pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request short term confidential treatment of information accompanying this application as outlined below:

Product internal, external, and test photographs User guide and installation guides Technical information regarding coupling devices The above materials are considered proprietary and confidential until such time as the official product launch takes place. Public disclosure of these materials may be harmful to the applicant The applicant understands that pursuant to Section 0.457 of the rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. siriusxm.com Sirius XM Radio Inc. 1500 Eckington Place NE Washington, DC 20002 T: 202-380-4000 F: 202-380-4500 Further, the applicant understands that the exhibits described above as requiring long term confidential treatment will remain undisclosed indefinitely, and that the exhibits described above as requiring short term confidential treatment will remain undisclosed for a period of 45 days from the date of the grant of equipment authorization, or until the product is publicly announced, whichever comes first. Sincerely, James S. Blitz, SVP Regulatory Counsel Sirius XM Satellite Radio, Inc. siriusxm.com

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6804055.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Sirius XM Radio Inc. 1500 Eckington Place NE Washington, DC 20002 T: 202-380-4000 F: 202-380-4500 US AGENT DESIGNATION FOR SERVICE OF PROCESS

(Applicant and US Agent are different parties) Date: 08/28/2023 TO: Element Materials Technology Washington DC LLC Certification Body Division 7185 Oakland Mills Road Columbia, MD 21046 This letter is to confirm that the below Designated U.S. Agent is accepting the responsibility to act as the U.S. based Agent for service of process as required by 47CFR 2.911(d)(7) for SIRIUS XM RADIO INC. DESIGNATED U.S. AGENT INFORMATION 0006345730 FCC Registration Number (FRN):

Company Name:

Contact Person:

Company Address: 1500 Eckington Pl NE Washington DC 20002 Telephone No:

Email:

202-380-1383 James.blitz@siriusxm.com SIRIUS XM RADIO INC James Blitz Signature:

Title:

Date:

SVP Regulatory Counsel 08/28/2023 The applicant accepts and acknowledges the obligation to maintain this agent in the US for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment, later per section 2.911(d)(7)(c) of CFR Title 47. The Applicant whichever the further acknowledges Designated U.S. Agent information changes. The agent is not affiliated with a test lab or TCB. the FCC whenever their responsibility inform to is APPLICANT INFORMATION FCC Registration Number (FRN): 0006345730 Company Name:

Grantee Code:

Contact Person:

SIRIUS XM RADIO INC RS2 James Blitz Company Address: 1500 Eckington Pl NE Washington DC 20002 Telephone No: 202-380-1383 Email:

James.blitz@siriusxm.com siriusxm.com Signature:

Title: SVP Regulatory Counsel Date: 08/28/2023 Sirius XM Radio Inc. 1500 Eckington Place NE Washington, DC 20002 T: 202-380-4000 F: 202-380-4500 siriusxm.com

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6804056.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case