all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Hot Tips Guide | Users Manual | 131.35 KiB | ||||
1 |
|
Quick Tips Guide | Users Manual | 1.16 MiB | ||||
1 |
|
Sure Connect Manual | Users Manual | 246.40 KiB | ||||
1 |
|
Users Guide | Users Manual | 3.18 MiB | ||||
1 | Test Report | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Operational Description | |||||||
1 | Test Report | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | External Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | ID Label/Location Info | |||||||
1 | External Photos | |||||||
1 | Test Setup Photos |
1 | Hot Tips Guide | Users Manual | 131.35 KiB |
portable wireless effortless XM2go Hot Tips Helpful Tips to Enjoy Your MyFi XM2go In Your Vehicle Because every vehicle is different, we can only provide some general guidelines. If you need help, consult a professional installer.
Decide which method (cassette adapter, professional wired FM, or self install via the XM SureConnect) is best for your vehicle and location.
Always do a trial run before installing anything permanently. Temporarily connect all power, audio, and antenna lines. Make sure that you receive the XM signal and that you hear XM programming through your vehicles audio system. You must have your vehicle antenna plugged in to the cradle or the XM SureConnect to receive the signal.
In the rare situation when you cant find a clear FM frequency or you experience interference, we recommend use of the optional Delphi FM Direct adapter (model SA10112, available separately at www.shopdelphi.com). TO XM RADIO XM ANT Made in Malaysia TO FM RADIO TO FM ANT In Your Home
Use the home stand to access the antenna, power, and audio cables for best sound quality.
Face your XM antenna south through a window so you have at least two bars of signal strength for recording.
If you need to place the antenna at a location more than 25 feet away, XM offers an extension kit (model XMAC1000) at www.xmradio.com (click XM Store). On the Go
Keep your MyFi receiver pointing straight up when listening to live programming. Built-in antenna
The belt clip is ideal for carrying your MyFi, and listening to recorded music. To wear your MyFi and listen to live programming, we recommend using the antenna headset (model X2GLHP01) available separately at www.xmradio.com. Receiving the Best Signal
Use the built-in signal strength meters for aiming the MyFi internal antenna or external antennas. Press menu, rotate the dial to Antenna Aiming, and press the dial. You will see two rows of bars. Move your MyFi or external antenna to a position that gives you the highest number of bars on either meter. Using the 2go Button
When you use the 2go feature for recording on the go, ensure that you have at least two bars of signal strength on the main screen. This will help prevent accidental cancellation of your recording if there is a fade in signal strength.
To start you recording, press 2go. Press it again to confirm recording.
To stop your recording, press 2go again. Scheduling a Recording Session
You must have your MyFi in the home stand with power adapter and an XM antenna connected.
Be sure you have at least two bars of signal strength.
To set up your scheduled recording time, go to menu. Select Schedule MY XM and then Session 1 or 2. IMPORTANT: Turn your MyFi off or it will not record at the scheduled time. It will turn on automatically to record.
When you want to listen to your recordings, press mode to switch to MY XM. Questions For more information, see your MyFi manuals or contact XM Listener Care at 1.800.XM.RADIO (967.2346). 2007 XM Satellite Radio Inc. MyFi and related logos are trademarks of Delphi Corporation. The XM name, XM2go, and related logos are registered trademarks of XM Satellite Radio Inc.
1 | Quick Tips Guide | Users Manual | 1.16 MiB |
Please note that the power cable that has been supplied with your device is supplied with permanently attached ferrite beads. It is the responsibility of the user to use the power cable with the ferrite beads. The user is cautioned that changes or modifications not expressly approved by XM Satellite Radio Inc. can void the users authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interfer-
ence that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the installation instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna of the affected receiver.
- Increase the separation between the XM equipment and the affected receiver.
- Connect the XM equipment into an outlet on a circuit different from that to which the affected receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Warning: The FCC and FAA have not certified this Satellite Radio Receiver for use in any aircraft (neither portable nor permanent installation). Therefore, XM Satellite Radio cannot support this type of application or installation stuff... Whats in the box?
MyFi receiver belt clip/stand home stand protective case remote control home power adaptor home antenna audio cable headphones rechargeable lithium ion battery vehicle cradle vehicle antenna cassette adaptor swivel mount
(with extra adhesive pad) vehicle power adaptor cleaning kit flush mount vent mount XM SureConnect Delphi Corporation 1441 West Long Lake Road Troy, Michigan 48098-5090 U.S.A. Customer Service: [1] 877.GO DELPHI www.delphi.com Printed on Recycled Paper 2007 Delphi Corporation. All rights reserved. DPSS-04-E-078 MyFi is a registered trademark of Delphi Corporation. The XM name, XM2Go, and related logos are trademarks of XM Satellite Radio Inc. Satellite Radio Receiver Quick Guide Model SA10113 Warning: This manual contains important safety and operating information. Please read, understand, and follow the instructions in this manual. Failure to do so could result in personal injury, death, and/or damage to your MyFi receiver, accessories, and/or to your vehicle or other property. ready... Getting set up 1 Install the battery Be sure to charge your battery for several hours on the home stand before use. Assemble your MyFi and its home stand as shown. 2 Set up 3 Connect to stereo Plug the AC adaptor into an outlet. Connect the home antenna and connect the line out to either your home stereo or powered (PC type) speakers. 5V DCANTLINE OUT 4 Controls Turn on your MyFi by pressing the power button. You should be able to hear channel 1, the XM Preview Channel, through your head-
phones or attached stereo/speakers. display backlit high-
resolution LCD display IR lens aim your remote control here 2go button store up to five hours of XM programming using the MY XM Time-
shifting Memory Mode mode button switch between LIVE XM and MY XM Time-shifting Memory Mode arrow buttons cycle through channel categories
(LIVE); skip to previous or next song (MY XM) preset/direct button select between direct channel entry or up to 30 presets number keys enter a channel directly or select your favorite presets 5 Aiming the home antenna If you do not hear channel 1, the XM Preview Channel, and the screen displays NO SIGNAL, try moving your MyFis antenna to another location. Make sure the antenna points south outdoors or through a window. Complete instructions, including an optional activation setup in a vehicle, the availability of accessories designed to improve your signal reception, and more useful information and tips about your MyFi can be found in your MyFi User Guide. Before you begin, take a moment to familiarize yourself with your MyFis controls. Most basic functions can be accessed using the front panel buttons and the dial. More advanced features are accessed using the menu button and the dial. power button press and hold to turn your MyFi on and off dial rotate to highlight a channel or menu option; push in to make selection, or press and hold for TuneSelect menu button access advanced features and configuration options memory button save and recall song information such as artist and song title volume buttons raise or lower volume only when headphones are plugged in display button change the appearance of the display, including access to different modes that display stocks or sports scores mute/pause/lock button press once to mute audio (LIVE) or pause playback (MY XM); press and hold to lock or unlock your MyFi controls Your MyFi can help you aim the home antenna to pull in the strongest signal. 1. Using the menu button and dial, choose Antenna Aiming. 2. Slowly turn and tilt the antenna. The signal bars on the display will change. Find the position that gives at least two bars on either satellite or terrestrial. 3. When youve found the best position, press the menu button to return to normal operation. set... Activate and explore Turn the dial to highlight channel 0, and press the dial in to select it. You should see an 8-character XM Radio ID in the display. (The XM Radio ID should also be on your MyFis package and under the battery.) Write the ID here:
The XM Radio ID does not use the letters I, O, S, and F. XM subscription required for reception of XM service. Not available in Alaska or Hawaii. Activate your XM Satellite Radio service by contacting XM at http://activate.xmradio.com or by calling 1.800.XM.RADIO (1.800.967.2346). You will need the XM Radio ID and a major credit card. XM will send a signal from the satellites to activate the full channel lineup. Activation normally takes 10 to 15 minutes, but during peak busy periods, you may need to keep your MyFi on for up to an hour to complete the activation process. lock indicator channel selection mode direct entry or preset banks A, B, or C signal strength 0 to 3 bars channel name listening mode show current listening mode
(LIVE or MY XM) alarm indicator battery level and charging status clock channel number artist name additional info volume/playback bars, Stock Ticker, and Info Extras song or program title Rotate the dial to preview a list of channels. When you find one youre interested in, press the dial in to tune to that channel!
If you want to tune to a channel and know its channel number, you can use the number keys. Press the pre/dir button until DIRECT flashes in the display. Press the number keys corresponding to the channel number, e.g., 4 followed by 5 for channel 45. XMs channels are organized into categories such as Rock, Country, News, and Sports. Press the and buttons to explore these categories; rotate the dial to view the channels within each category. go!
Charge the battery and store some music MY XM Time-shifting Memory Mode Feature 2go: Store and play back with a single button Your MyFi lets you store up to five hours of programming and play it back at a later time. Listen to XM wherever you are, including on an airplane, subway, or anywhere satellite coverage may be limited. While the battery is charging in the home stand, try storing some XM programming from XMs lineup of over 150 channels!
TO STORE:
1. Turn on your MyFi and select a channel. 2. Press the 2go button. To prevent you from accidentally storing over a previously stored program, your MyFi will ask you to confirm. Press the 2go button again. The center of the top line of your MyFis screen switches from LIVE to REC. 3. To stop storing and continue with live programming, press the 2go button again. The display reverts to LIVE. TO PLAY BACK:
1. Press the mode button. Your MyFi switches from LIVE to MY XM, and will begin to play back from the begin-
ning or where you last stopped or paused. 2. MY XM holds up to five hours of programming. Press either the or button to skip to the previous or to the next song. 3. You can also rotate the dial to view a list of the stored artists and songs. Simply highlight an artist using the dial;
the artist, song title, and other useful information will scroll by. Then press the dial in to listen to it. go further... Advanced features & additional info Check out the User Guide for advanced features, trouble-
shooting guidelines, and additional information.
1 | Sure Connect Manual | Users Manual | 246.40 KiB |
XM SureConnectVehicle Installation GuideImportant: Be sure to readthe information on pages4and5carefullytodetermineifthe XM SureConnect vehicle installation method is appropriate for your vehicle. Please referencethe user and installation guides for your XM Satellite Radioreceiver for additionalinformation about optional installation methodslike using thecassetteadapter or ProfessionalWired FM. IC & FCC Information Please note that the power cable that has been supplied with your device is supplied with permanently attached ferrite beads. It is the responsibility of the user to use the power cable with the ferrite beads. The user is cautioned that changes or modifications not expressly approved by XM Satellite Radio Inc. can void the users authority to operate this device. This device has been designed to operate with the antenna provided in the original packaging. Use of antenna other than the antenna provided will result in improper operation, and is strictly prohibited per regulations of Industry Canada. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the installation instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna of the affected receiver.
- Increase the separation between the XM equipment and the affected receiver.
- Connect the XM equipment into an outlet on a circuit different from that to which the affected receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Warning: The FCC and FAA have not certified the receiver for use in any aircraft (nei ther portable nor permanent installation). Therefore, XM Satellite Radio cannot support this type of application or installation. 2 Table of Contents IC & FCC Information
. 2 Choosing the Proper XM SureConnect Installation . 4 Installation Locations . 5 Installation Setup Overview for Option 1 and Option 2 . 6 Option 1 External FM Antenna Coupling Clip Installation . 8 External FM Antenna Cable Routing . 9 Option 2 Internal On Glass FM Antenna Installation . 10 Internal On Glass Antenna Contact Bracket Installation. 12 Internal On Glass Antenna Cable Routing . 14 Additional Information . 15 Warning: This guide contains important installation information. Please read, understand, and follow the instructions in this guide. Failure to do so could result in personal injury, death, and/or damage to your XM Satellite Radio receiver, accessories, and/or to your vehicle or property. Caution: Use your XM SureConnect accessory with only the enclosed compo-
nents and approved connectors. Do not modify wires or other connectors in any way; you could cause a malfunction, which could damage your receiver and will void your warranty. 3 Choosing the Proper XM SureConnect Installation To choose the proper XM SureConnect installation method, first you need to determine the location of your vehicles FM antenna, and plan how to properly route the XM SureConnect cables to your FM antenna location. The FM antenna type and location will determine which option you will need. The chart below and illustrations on page 5 will assist you in locating your vehicles FM antenna from one of seven most common locations. Note: XM SureConnect was not designed for use on retractable (automatic up and down) FM antennas and some FM antennas that are custom shapes that were designed to match the styling of the vehicle. If your vehicle has either of these types of FM antennas, you will not be able to use the XM SureConnect accessory. You will need to use the professional wired FM method of installation. For best audio performance, you will either install the XM SureConnect by clip-
ping directly to an external FM antenna (locations 1 through 4) or directly on an internal on-glass FM antenna (locations 5 through 7) using the window Contact Bracket included. You will either use... 4 1234FrontfenderRear fenderRoof top frontRoof top backLocated at top of windshieldLocated at top of rearwindowLocated on rear side glass(in some SUVs)567Option1Option2orExternalFMAntennaInternal On-Glass FM Antenna Installation Locations 5 1342567 Installation Setup Overview for both Options 1 and 2 TThhee ffoolllloowwiinngg sstteeppss wwiillll gguuiiddee yyoouu tthhrroouugghh tthhee iinnssttaallllaattiioonn ooff yyoouurr XXMM SSuurreeCCoonnnneecctt uussiinngg eeiitthheerr ooppttiioonn 11 oorr ooppttiioonn 22.. 1. Install your XM Radio in your vehicle as described in your XM Radio user and installation guides, but do not connect the XM antenna plug to the dock at this time. 2. Now that you have located your vehicles FM antenna, determine the best routing method to get the XM SureConnect output cable to the FM antenna. For eexxtteerrnnaall aanntteennnnaass (Figure 1b), the Coupling Clip needs to be routed outside the vehicle. For iinntteerrnnaall oonn--ggllaassss aanntteennnnaass (Figure 1c), all routing is inside the passenger compartment and the Contact Bracket is used. 3. To route the output cable with Coupling Clip to your vehicle FM antenna, follow the instructions on the next pages . There are separate instructions for external antenna vs the internal on-glass antenna. Follow the instruc-
tions that apply to your vehicles antenna type. NNoottee:: This guide assumes you have already installed your XM antenna per the instructions in your XM radio user guide. The positions of the XM antenna in the illustrations on page 9 are for example only. There is no need to change your XM antenna installation. 4. Connect the XM antenna to the XM SureConnect antenna input, located on the coupler module about 2 feet from the end of the input cable (see Figure 1a). Tuck any excess input cable and the coupler module behind the dash or in another hidden location for a professional looking installation. 5. Now connect the XM SureConnect input cable to the XM radio or vehicle docks XM antenna input. 6 Installation Setup 7 no boot necessaryglasscontactbracketinside your vehicleoutsidecar dockXM car antennacoupling clipcoupling moduleinput cableoutput cableExternal AntennaConnecting the ComponentsInternal on-glass antennabootpowerXM antennaorFigure 1aFigure 1bFigure 1cOption 1Option 2Common connections for both options 1 and 2 Option 1: External FM Antenna Coupling Clip Installation NNoottee:: IIff yyoouu ddeetteerrmmiinneedd yyoouu nneeeedd ttoo uussee OOppttiioonn 22,, ttuurrnn ttoo ppaaggee 1100 aanndd bbeeggiinn.. SStteepp 11::
If you have an external or roof mount FM antenna, attach the Coupling Clip directly to the base of the antenna as illustrated in Figure 2. Cover the clip with the rubber boot provided to protect and secure the clip. Secure the cable inside the trunk or hood to avoid interference or accidental damage. Installing the Coupling Clip first will avoid having excess cable outside the vehicle. a. Snap the Antenna Coupling Clip into place. b. Slide the boot over the top of your antenna. c. Slide the boot down the antenna so it covers the clip. Figure 2 8 NNoottee:: You may want to use the optional cable wrap for a more secure solution. car antennarubberbootcoupling clip(a)(b)(c) External FM Antenna Cable Routing In the front, route the cable across the weather seal near the bottom of the door to reduce water leaks. Once inside the car, tuck the XM SureConnect output cable into the door jam up to the dash or under the carpet as shown in Figure 3. Figure 3 In the rear, always cross the weather seal at the lowest part of the trunk to reduce water leaks. Route the cable from the trunk into the vehicle through available wire channels. Next, route through the rear passenger compartment. Tuck the cable under the door jam trim or under the carpet to the XM Receiver as shown in Figure 4. Figure 4 NNoottee:: XM antenna cables are not illustrated. 9 XM car antennaXM receivercoupler clipcoupler moduleXM car antennaXM receivercoupler clipcoupler module Option 2: Internal OnGlass FM Antenna Installation Identifying the OnGlass FM Antenna in Your Vehicle UUsseeffuull IInnffoorrmmaattiioonn ffoorr SStteepp 11::
CCAAUUTTIIOONN:: Do not attach the contact bracket to the rear defogger elements. In some vehicles they look similar to the FM Antenna. You can distinguish the FM Antenna Elements from the Defogger Elements by several key features. See Figure 5. Figure 5 10 single contactdual contactopen endsverticalelementnon-uniformspacinguniform spacingFM AntennaRear Window(may be hidden)(may be hidden)DO NOT PLACE ON DEFOGGER Option 2 (continued) 1. The FM antenna is typically found on the top 6 to 8 inches of the rear window while the Defogger is located below. 2. The FM antenna has open ends (connected to nothing) and the Defogger does not. 3. The FM antenna will have a single contact point and the Defogger will have two, which are typically on opposite sides of the window. The contact points may be hidden behind interior liners or exterior glass tinting but the key is to locate where the elements extend beyond the window edge. The FM antenna will have only one location while the defogger can have two or more. 11 Internal OnGlass FM Antenna Contact Bracket Installation Step 1:
Install the Contact Bracket on the interior window surface over the antenna element using the adhesive pad provided and the following steps. It may be mounted either vertical or horizontal depending on the portion of the antenna element most easily accessed. Select a bracket position that allows room to attach the Coupling Clip and cleanly run cables without blocking the drivers view. Install the on-glass antenna Coupling Clip before routing the cable to avoid excess cable. See Figure 6. a. Clean the mounting location on the glass for the Contact Bracket with any household window cleaner that will remove grime. Be sure the surface is com-
pletely dry before proceeding. You may need to use your vehicles air conditioning and/or defogger to keep the cleaned surface dry during the installation for the adhesive to set properly. b. Remove the red liner from the adhesive pad and press the Contact Bracket firmly to the identified mounting location on the glass. You can also view the alignment through the glass from outside the vehicle. You will have only a limited amount of time to reposition the Contact Bracket before the adhesive cures. c. The Contact Bracket has alignment arrows on the side opposite the adhesive pads. These arrows indicate the contact strip location on the base of the bracket. Align the arrows with the on-glass antenna element to ensure direct contact between the strip and the element. Press and hold the Contact Bracket in place for 10 to 15 seconds. d. Once the Bracket is in place, attach the Coupling Clip to the bracket flange and route any excess cable behind liners for a professional look. 12 Contact Bracket and Coupling Clip Installation (continued) Clean this area. Must be dry. Figure 6 13 contact bracket witharrows for alignmentcontact stripadhesive padsantenna element in glassno bootrequired(a)(b)(c)(d) Internal OnGlass FM Antenna Cable Routing Step 2:
In the rear, route the XM SureConnect output cable from the antenna element, along the window edge, down to the win-
dow liner. From the rear passen-
ger compartment tuck the cable under the carpet or door jam trim until you reach the front dash area, ending at the XM Receiver. (See Figure 7.) Figure 7 In the front, route the XM SureConnect output cable from the antenna element, along the windshield edge, down to the window liner along the floor and up to the dash as shown in Figure 8. 14 Figure 8 NNoottee:: XM antenna cables are not illustrated. coupler clipwith contact bracketinternal on glass antennaXM car antennaXM receivercoupler moduleXM car antennaXM receivercoupler clipwith contact bracketinternal on glass antennacoupler module Additional Information NNoottee:: When routing the XM SureConnect cable use pre-existing wire channels whenever possible to avoid loose wires on the interior of the vehicle which are susceptible to damage and to maintain a professional looking installation. Route cable carefully by taking notice of how doors open and close, as well as how seats move when they are adjusted so you can be certain there is ample clearance provided for the cable. Avoid inadvertent damage that may be caused by kinking, crimping, twisting or chafing the cables. Secure and tie wrap the excess cable under your dash board, between the seat and the console, or on the floor under a seat or floor mat. Securing the excess cable will help to prevent it from interfering with the everyday use of your vehicle, improve the appearance of the installation, and avoid any undesirable accidental damage to the cables that might result in loss of satellite signal or XM SureConnect performance. Important Information:
- When attempting to remove the XM SureConnect from either method of installation, be sure to remove the boot first if applicable and pull the Coupling Clip away by lifting from the end where the cable enters the clip. Squeezing the Coupling Clip in the middle may pinch the contacts inside and make removing the clip more difficult.
- Once installed, if you experience interference problems with your AM reception, your vehicles electrical system may require you to unplug the power adapter when your XM Satellite Radio is not in use.
If you installed the XM SureConnect using Option 1, it is recommended that you use brushless or touchfree car washes or hand wash your vehicle to avoid damaging the XM SureConnect or your vehicle. Follow the infor-
mation provided by the vehicle manufacturer for instructions on removing the FM antenna. 15 2006 XM Satellite Radio Inc. The XM name and related logos are trademarks of XM Satellite Radio Inc. XMTH-SZ04513-00
1 | Users Guide | Users Manual | 3.18 MiB |
Satellite Radio Receiver User Guide Model SA10113 Delphi Corporation 1441 West Long Lake Road Troy, Michigan 48098-5090 U.S.A. Customer Service: [1] 877.GO DELPHI www.delphi.com Printed on Recycled Paper 2007 Delphi Corporation. All rights reserved. DPSS-06-E-062 MyFi is a registered trademark of Delphi Corporation. The XM name, XM2Go, and related logos are registered trademarks of XM Satellite Radio Inc. Warning: This manual contains important safety and operating information. Please read, understand, and follow the instructions in this manual. Failure to do so could result in personal injury, death, and/or damage to your MyFi receiver, accessories, and/or to your vehicle or other property. FCC Statement Please note that the power cable that has been supplied with your device is supplied with permanently attached fer-
rite beads. It is the responsibility of the user to use the power cable with the ferrite beads. The user is cautioned that changes or modifications not expressly approved by XM Satellite Radio Inc. can void the users authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Important: The FCC and FAA have not certified the Delphi XM MyFi Satellite Radio Receiver for use in any aircraft (neither portable nor permanent installation). Therefore, Delphi cannot support this type of application or installation. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Table of Contents A Brief History . 4 About Delphi. 5 About XM . 5 Lets Get Started . 6 Controls . 6 Main controls . 6 Remote control . 8 Display screen . 8 On the flip side . 9 Whats in the box? . 10 Setting Up . 12 Assembly. 12 Connecting to a stereo . 13 Receiving the XM signal . 13 Activating Your MyFi . 14 Go Ahead! . 14 Listening To XM. 15 Changing channels . 15 Saving favorite channels into presets. 16 Storing song information in memory. 17 TuneSelect: Always find your favorite songs or artists . 17 MY XM Time-shifting Memory Mode . 18 2go: Store and play back . 18 Scheduling a session . 19 Personalizing Your MyFi. 20 Adjusting audio. 20 Changing display information . 21 Make your vehicles FM radio an XM radio . 23 Stock Ticker . 24 Info Extras. 24 Direct Tune: Select channels faster . 25 Setting time features. 25 Skipping channels . 26 Returning to factory defaults. 26 Using MyFi At Home . 27 Aiming the home antenna . 28 Using MyFi In Your Vehicle . 29 Audio quality . 29 Placing the antenna . 31 Mounting your MyFi on the dash . 32 Using MyFi On The Go . 33 Signal reception guidelines . 34 Other Things You Should Know. 35 Care . 35 Important battery informationplease read . 35 Accessories (sold separately) . 36 Troubleshooting . 37 Contacting Technical Support and Customer Service . 40 Technical information . 40 Warranty . 41 Delphi limited consumer warranty. 41 How you (the Customer) can get service . 42 How state law relates to the warranty. 42 About Delphi Delphi is a worldwide leader in mobile electronics, vehicle components, and audio technology. Delphi created the first in-dash car radio in 1936 and continues its strong tradition of innovation in the audio industry. Now Delphi technology has helped make satellite radio a reality, and Delphi continues to expand its in-vehicle and consumer electronics technologies. With its exciting line of satellite radio products, Delphi offers a broad portfolio of products to answer a wide variety of information and entertainment needsin the vehicle, home, office, or virtually anywhere. About XM XM is America's number one satellite radio service with more than 7 million subscribers. Broadcasting live daily from studios in Washington, DC, New York City, the Country Music Hall of Fame in Nashville, Toronto and Montreal, XM's 2007 lineup includes more than 170 digital channels of choice from coast to coast: the most commercial-free music channels, sports, talk, comedy, children's and entertainment programming; and the most advanced traffic and weather information. XM, the leader in satellite-delivered entertainment and data services for the automobile market through part-
nerships with General Motors, Honda, Toyota, Hyundai, Nissan, Subaru, Suzuki and Porsche, is available in more than 140 different vehicle models for 2007. XM's industry-leading products are available at consumer electronics retailers nationwide. For more information about XM hardware, programming and partnerships, please visit http://www.xmradio.com A Brief History Ever since XM Satellite Radio signed up its first subscriber in 2001, Delphi and XM have been working constantly to create the best satellite radio receiver. We imagined a radio that works not only in a vehicle, a home, or an office, but something you can take with you virtually anywhere you go. Now we have it: introducing MyFi, the worlds first truly portable satellite radio receiver. With your MyFi, you can:
listen to live XM programming at home, in your car, and now virtually anywhere outdoors
(page 15) use the exclusive satellite radio memory mode feature MY XM to easily save up to five hours of the most current XM programming for listening at another time or where live signal reception may be limited (page 18) program your MyFi to store fresh XM programming at a specific time every day (page 19), and per-
sonalize it to suit your lifestyle (page 20) 4
*To receive the XM service, you must subscribe to XM. Available in the continental United States and Canada only. Satellite radio reception depends on the ability of the antenna to receive a signal. The signal may not be available in buildings or if obstructed (e.g., by mountains, trees, bridges, etc). 5 Lets Get Started First, some important reminders We know youre eager to turn on your brand new MyFi and listen to XM. Please take a moment to remember the following:
Warning: This manual contains important safety and operating information. Please read, understand, and follow the instructions in this manual. Failure to do so could result in personal injury, death, and/or damage to your MyFi receiver, accessories, and/or to your vehicle or other property. Caution: Use your MyFi only with the enclosed components or approved accessories. Do not modify wires or other connections in any way; you could cause a malfunction, which could damage your MyFi and will void your warranty. Controls Before you begin, take a moment to familiarize yourself with your MyFis controls. Most basic functions can be accessed using the front panel buttons and the dial. More advanced features are accessed using the menu button and the dial. MAIN CONTROLS display backlit high-
resolution LCD display IR lens aim your remote control here 2go button store up to five hours of XM programming using the MY XM Time-
shifting Memory Mode mode button switch between LIVE XM and MY XM Time-shifting Memory Mode arrow buttons cycle through channel categories
(LIVE); skip to previous or next song (MY XM) preset/direct button select between direct channel entry or up to 30 presets Warning: If you use your MyFi in a moving vehicle or watercraft, keep your eyes on the road or water, and hands on the wheel or controls. Not doing so could result in personal injury, death, and/or damage to your MyFi receiver, accessories, and/or to your vehicle or other property. Caution: Your MyFi is not waterproof. Avoid splashing it with liquids and never submerge it. Were always concerned for your safety and want you to have the best MyFi experience possible!
power button press and hold to turn your MyFi on and off dial rotate to highlight a channel or menu option; push in to make selection, or press and hold for TuneSelect menu button access advanced features and configuration options memory button save and recall song information such as artist and song title volume buttons raise or lower volume only when headphones are plugged in display button change the appearance of the display, including access to different modes that display stocks or sports scores mute/pause/lock button press once to mute audio (LIVE) or pause playback (MY XM); press and hold to lock or unlock your MyFi controls number keys enter a channel directly or select your favorite presets 6 7 REMOTE CONTROL search button search by scanning presets or by scanning all channels 2go button store up to five hours of XM programming using the MY XM Time-
shifting Memory Mode jump button switch to previous channel arrow buttons view channel categories (LIVE);
skip to previous or next song (MY XM) preset/direct button switch between direct channel entry or up to 30 presets number keys enter a channel directly or select your favorite presets power button press to turn your MyFi on and off mode button switch between LIVE XM and MY XM Time-shifting Memory Mode channel buttons preview channels (LIVE); preview songs
(MY XM) menu button customize options and access advanced features XM button select channel or menu option; push and hold to add artist/song to your TuneSelect list pause button pause MY XM playback volume buttons raise or lower volume only when headphones are plugged in mute button mute live XM display button change the appearance of the display, including access to different modes that display stock quotes and Info Extras such as sports scores memory button save and recall song information such as artist and song title DISPLAY SCREEN lock indicator channel selection mode direct entry or preset banks A, B, or C signal strength 0 to 3 bars channel name listening mode show current listening mode
(LIVE or MY XM) alarm indicator battery level and charging status ON THE FLIP SIDE battery door latch push inward to slide battery door open belt clip lock clock reset button channel number artist name battery compartment additional info volume/playback bars, Stock Ticker, and Info Extras song or program title 8 universal connector headphone jack your ear buds or headphones plug in here antenna jack for use with an external antenna XM Radio ID use this to activate your radio 9 RESE Whats in the box?
Your MyFi includes these components:
MyFi receiver belt clip/stand rechargeable lithium ion battery headphones vehicle antenna home stand remote control vehicle cradle protective case swivel mount (with extra adhesive pad) cassette adapter vehicle power adapter flush mount home power adapter home antenna audio cable 10 cleaning kit vent mount XM SureConnect 11 Setting Up Assembly Insert the battery and assemble your MyFi and its home stand as shown; plug the AC adapter into an outlet. Let the battery charge for at least three hours. Connecting to a stereo Plug the AC adapter into an outlet. Connect the home antenna and connect the line out to either your home stereo or powered (PC type) speakers. Connect to stereo Receiving the XM signal Turn your MyFi on by pressing the power button. You should be able to hear channel 1, the XM Preview Channel. If you do not, and the screen displays NO SIGNAL, try moving your MyFis antenna to another location. Make sure the antenna points south, either outdoors or through a window. If the NO SIGNAL message persists, refer to Aiming the home antenna
(page 28). Please read the TIP below the illustration for optional setup and activation procedure information. Insert battery Important: You will need to fully charge your MyFi battery for at least three hours to have sufficient battery power for portable use. Assemble home stand Aim antenna TIP: Establishing a good signal environment in the home setup is highly desirable, but this is not the only way you can receive the XM signal. As an option, you can refer to Using MyFi In Your Vehicle (page 29) and continue this setup and activation process with your MyFi installed in a vehicle. 12 13 5VDCANTLINE OUT Listening To XM Changing channels 1. Rotate the dial to preview a list of channels. 2. When your desired channel is highlighted, press the dial in to select that channel.
-OR-
1. Press the pre/dir button until the word DIRECT flashes in the display. 2. Press the number keys corresponding to a channel number. For channel 8, press 8. For channel 130, press 1, then 3, then 0.
-OR-
1. Press the or buttons while in LIVE mode. You will see the channels organized by category. 2. Rotate the dial to highlight a channel. Press the dial in to select that channel. Activating Your MyFi Turn the dial to highlight channel 0, and press the dial in to select it. You should see an 8-character XM Radio ID in the display. (The XM Radio ID should also be on your MyFis package and under the battery.) Write the ID here:
The XM Radio ID does not use the letters I, O, S, and F. Activate your XM Satellite Radio service by contacting XM at http://activate.xmradio.com or by calling 1.800.XM.RADIO (1.800.967.2346). You will need the XM Radio ID and a major credit card. XM will send a signal from the satellites to activate the full channel lineup. Activation normally takes 10 to 15 minutes, but during peak busy periods, you may need to keep your MyFi on for up to an hour to complete the activation process. When you can access the full channel lineup on your MyFi, youre done!
Go Ahead!
Rotate the dial to preview a list of channels. When you find one youre interested in, press the dial in to tune to that channel. 14 15 Saving favorite channels into presets Your MyFi can store up to 30 of your favorite channels as presets. The presets are organized into three banks
(A, B, or C) that each contain 10 presets. TO SAVE A CHANNEL INTO A PRESET:
1. Tune to the channel using the dial or by entering the channel number. 2. Press the pre/dir button until PRESET A, PRESET B, or PRESET C appears in the display. 3. Press and hold a number key to save that channel into that preset. For example, by pressing and holding the 3 key, you can save channel 45 into the A-3 preset. Use the 0 key for the tenth preset. TO RECALL A PRESET:
1. Press the pre/dir button until PRESET A, PRESET B, or PRESET C appears in the display. 2. Press the number key corresponding to your desired preset. In the example, press the 3 key and your MyFi should tune to channel 45. You can use the preset banks to organize your channels in different ways. You might want to store your favorite channels in bank A, and someone elses favorite channels in bank B. Or store music channels in one bank, news and talk channels in another. Storing song information in memory Ever hear a song and later forget the artists name or song title? Let your MyFi remember for you. TO STORE A SONGS INFORMATION IN MEMORY: Press and release the mem button while the song or program is playing. Your MyFi will beep to confirm. TO RECALL A SONGS INFORMATION FROM MEMORY:
Press and hold the mem button until your MyFi beeps and you see Memory Recall in the display. If you have stored more than one songs information, you can rotate the dial to view each entry. Your MyFi can hold up to 20 entries, after which any new entry replaces the oldest entry in memory. TuneSelect: Always find your favorite songs or artists If you cant get enough of a certain artist or song, your MyFi can tell you when its being played on any XM channel. 1. Press the menu button and choose the TuneSelect option. 2. Choose either Select by Song or Select by Artist. Select by Song finds a song or program by its title;
Select by Artist searches using the artists name. 3. When you hear one of your favorite songs or artists, press in and hold the dial. Your MyFi will beep and flash Song Selected or Artist Selected on the display. This signals that your chosen song title or artist name is saved in the TuneSelect list. The list holds up to 20 entries (either artist names or song titles); when the list is full, any new entry replaces the oldest song title or artist in the list. 4. When any song or artist on the list is currently playing on any other XM channel, your MyFi will beep and flash Artist/Song Found on the screen. Switch to that channel by pressing in the dial. 5. You may erase individual song titles or artists from the list, or all the songs and artists. Using the menu button and dial, choose the TuneSelect option and then select either Erase All or Erase Some. Follow the instructions on your MyFis display. 16 17 MY XM Time-shifting Memory Mode 2go: Store and play back Your MyFi lets you store up to five hours of programming and play it back at a later time or where live signal reception is limited. Listen to XM wherever you are, whenever you prefer. TO STORE BY PRESSING ONE BUTTON:
1. Turn on your MyFi and select a channel. 2. Press the 2go button. To prevent you from accidentally recording over a previously stored program, your MyFi will ask you to confirm. Press the 2go button again. The center of the top line of your MyFis screen switches from LIVE to REC. TIP: Press and hold the 2go button and you can automatically bypass the second confirmation 2go button press. 3. To stop storing and continue with live programming, press the 2go button again. The display reverts to LIVE mode. TO PLAY BACK:
1. Press the mode button. Your MyFi switches from LIVE to MY XM and will begin to play back from the beginning or where you last stopped or paused. 2. MY XM holds up to five hours of programming. Press either the or button to skip to the previous or to the next song. 3. You can also rotate the dial to view a list of the stored artists and songs. Simply highlight an artist with the dial, then press the dial in to listen to it. 4. To return to LIVE listening, press the mode button again. Scheduling a session You can set your MyFi to store XM programming at a specific time using the MY XM Time-shifting Memory Mode. 1. Press the menu button and use the dial to select MY XM. 2. Select Schedule MY XM. 3. You can schedule up to two sessions. Choose Session 1 or Session 2. 4. Rotate the dial to change and press the dial in to fill in the How Often?, starting time, ending time, and channel fields. The How Often? option allows you to activate the session Once, Every Day, or Off
(postponing until another time). TIP: You can use the number buttons to enter the channel number. You can also use the up, down, and XM buttons on the remote to enter time and make selections. 5. Set up the second session, if you desire. The combined time for both sessions should not exceed five hours in one day and the sessions may not overlap each other. Your MyFi will advise you if either condition occurs, and will give you another chance to schedule the sessions. 6. Press the menu button. 7. Turn off your MyFi. When the session starts, the display will show Session 1 (or 2) Recording. If your MyFi is already on when the session is supposed to start, MyFi skips the session and does not interrupt your listening. When the session starts, it writes over the oldest stored programs first, ensuring that youre always listening to the freshest programming. Important: You can only store a session if your MyFi is turned off and plugged into the home stand, with the AC adapter connected and receiving power. You must connect the home antenna to receive the XM signal. TIP: If you set the alarm to turn on your MyFi before a session is scheduled to start, that session could be can-
celled if the MyFi is on and not off to begin the session. 8. To erase the stored content, choose the Clear MY XM option under the MY XM menu. All previously recorded content can no longer be accessed. 18 19 Personalizing Your MyFi You can easily adapt your MyFi to the way you listen and use the satellite radio. You can change how the display appears, track stocks and other information, adjust your MyFis audio output, and change how you use the display. Simply press the menu button, rotate the dial to high-
light an option, and press the dial in to select. Your MyFi guides you with instructions right on the screen. If you ever get lost or decide not to change anything, press the menu button to return to normal operation. Or wait for about 15 seconds and your MyFi reverts by itself. Adjusting audio You can ADJUST THE BASS OR TREBLE, which affects both the headphones and audio outputs of the home stand and vehicle cradle. 1. Press the menu button and use the dial to select Set Audio. 2. Select Set Tone. 3. Rotate the dial to high-
light either Bass or Treble. Press the dial in to select. 4. Rotate the dial to change the bass or treble level. Press the dial in to confirm. 5. When youre done, press the menu button until you return to normal operation. TO CHANGE THE AUDIO LEVEL of the cassette adapter, FM transmitter, or line-level audio output:
1. Press the menu button and use the dial to select Set Audio. 2. Select Line Out Level. Your MyFi can detect when youre using the FM transmitter or cassette adapter and will make the appropriate changes to the settings. 3. Rotate the dial to change the audio level. Push the dial in to confirm. 4. When youre done, press the menu button until you return to normal operation. Changing display information TO DISPLAY DIFFERENT INFORMATION ON THE SCREEN, press the display button to cycle through these options:
Primary display format Stock Ticker format Caution: Before putting on the headset, always adjust the volume setting at the lowest level to avoid possible hearing damage. Info Extras format Scrolling text format 20 21 TO CHANGE THE APPEARANCE OF THE SCREEN, press the menu button and select Change Display. You can change the brightness and contrast, set how long the backlight remains on, flip the screen between positive
(black characters on white background) or negative (white characters on black background) modes, and set the way the Stock Ticker and Info Extras appear on the screen. Make your vehicles FM radio an XM radio Your MyFi contains a built-in FM transmitter that sends the XM audio signal to your vehicles FM radio. You can use the FM modulator in your vehicle cradle only. You will first need to determine if your installation will require the use of the FM modulator or the use of the cassette adapter. If your vehicles radio does not have a cassette player, you will need to use either the Professional installed FM Direct Adapter (sold separately) or the self install XM SureConnect method of installa-
tion. Please read the XM SureConnect installation guide before installing. 1. Turn on your vehicles FM radio and turn off your MyFi. Unplug any headphone or audio cable from your MyFis headphone jack and any audio cables connected to the vehicle cradle. 2. You need to find an FM frequency that is not being used by any commercial FM station. Tune your FM radio to the following frequencies:
88.1, 88.3, 88.5, 88.7, 88.9, 106.7, 106.9, 107.1, 107.3, 107.5, 107.7, and 107.9. Note which frequency has no FM station or the least amount of interference. 3. Turn on your MyFi. 4. Using the menu button and the dial, select Set FM Frequency. 5. Rotate the dial to highlight the FM frequency you found in step 2. Press the dial in to select that frequency. 6. You should now hear XM programming on your FM radio. If the sound isnt clear or you hear noise or static, try another FM frequency. If youre traveling, you may need to retune periodically; this is due to the differences in signal strength of local FM stations and is not a problem associated with your MyFi. TIP: When you plug a cassette adapter into your head-
phone jack, your MyFi automatically turns off the FM transmitter. TIP: In the rare situation that you cannot find an open FM frequency, consult a professional car audio installer. You can improve the audio performance in your vehicle by using the Delphi FM Direct Adapter (model SA10112, sold separately). 22 23 Stock Ticker With your MyFi, you can track up to 20 stock symbols and see their prices and movements right on the screen.*
TO ADD A STOCK SYMBOL:
1. Using the menu button and dial, select Stock Ticker. 2. Rotate the dial to highlight Add Stocks and press the dial in to select. 3. Rotate the dial to add each letter of the desired stock symbol. Press the dial in after choosing each letter.
(Your MyFi has a list of more than 9,000 stock symbols, and will not only help you complete each entry but prevents you from entering incorrect symbols.) 4. When youve entered all your desired stock symbols, press the menu button several times (or simply wait a few seconds) until your MyFi returns to normal operation. 5. Press the display button until you see Stocks and a scrolling ticker across the bottom of the screen. This display mode only works when youre listening to LIVE programming. TO ERASE some or all of the stock symbols, use the menu button and dial to select Stock Ticker, then to select Erase Stocks. Follow the directions on your MyFis screen. Info Extras XM Satellite Radio will broadcast information such as sports scores and other features from time to time. To see whats available, press the menu button and select Info Extras. Simply follow the instructions on the display to select which Info Extras youre interested in. To view your chosen Info Extras, press the display button until you see the Info Extras items at the bottom of the screen. You can also affect how you view Info Extras by selecting the Change Display option in the menu. Direct Tune: Select channels faster Normally as you rotate the dial, you can preview whats playing on other XM channels before you push the dial in to select a channel. To automatically tune to the channel without pressing the dial, you can set the following option:
1. Use the menu button and dial to select Channel Access. 2. Select Direct Tune. 3. Select Direct Tune On. (To return to the factory-
default method, select Direct Tune Off.) Setting time features XM automatically sets the minutes of your MyFis built-in clock. You can adjust the hours by time zone, choose 12- or 24-hour formats, and choose whether daylight-
saving time is used in your area. Your MyFi also has a sleep timer and an alarm. You can set the sleep timer to shut off your MyFi automatically after 15 minutes or up to an hour. The alarm turns on your MyFi at a certain time; you can choose to be alerted by a beep or by XM programming. Important: If you use your MyFi in your vehicle, you can choose whether your ignition key automatically powers on your MyFi. Choose the Vehicle Mode menu, and then the Auto On/Off. Set to On to turn MyFi on or off with the ignition key. Set this option to Off if your MyFi is connected to power that is always live; you must then use MyFis power button to turn it on or off. For vehicles with power outlets that are always powered, we recommend that you use the Delayed Power OFF feature. This avoids draining your vehicle battery if your MyFi is left on.
*Quotes are provided by ComStock, Inc. and cover most stocks listed on the NYSE, AMEX, or NASDAQ. Market information is delayed by approximately 25 minutes. 24 25 Skipping channels You can simplify the list of channels that you see when you rotate the dial. To skip over a channel:
1. Use the menu button and dial to select Channel Access. 2. Choose the Channel Skip/Add option. 3. You will see a list of channels. There is a
+ or a - in front of each channel. To skip a channel, high-
light that channel and press the dial in to change the + to -. To add a channel, change the - to a +. 4. When youre done, press the menu button twice
(or do nothing for 15 seconds) until your MyFi returns to normal operation. TIP: You can still tune to any channel by entering the channel number or by pressing a preset. Skipping a channel does not remove it from use. TIP: This should not be used for parental control. To completely block access to any XM channel, contact XM Listener Care at 1.800.XM.RADIO (1.800.967.2346). Returning to factory defaults You can return your MyFi to its factory-installed format. Be careful: This feature erases all settings, including Stock Ticker, display options, audio options, channel skip/add, Info Extras, and anything stored in MY XM. 1. Use the menu button and dial to select Set Factory Defaults. 2. Select Yes to restore your MyFi to the factory settings. Using MyFi At Home Turn off your MyFi and your audio system. Connect your MyFi to your audio system in either way illustrated below. If you use the home stand and connect it to a stereo, you must plug in the AC adapter and home antenna. Your MyFis audio output will not work if these are not connected. If you attach your MyFi to powered speakers, adjust the audio level using the speakers volume control. TIP: If you hear nothing, try adjusting the volume controls located on your MyFi. If there does not appear to be power, check all connections and make sure all plugs are inserted completely. 26 27 Aiming the home antenna Your MyFi can help you aim the home antenna to pull in the strongest signal available. 1. Using the menu button and dial, choose Antenna Aiming. 2. Slowly turn and tilt the antenna. The signal bars on the display will change. Find the position that gives at least two bars on either satellite or terrestrial. 3. The antenna aiming screen remains as long as its needed to help you position the antenna. When youve found the best position, press the menu button to return to normal operation. Using MyFi In Your Vehicle Because every vehicle is different, we can only provide some general guidelines. If you need help, consult a professional installer. 1. Decide which method (cassette adapter, professional wired FM, or self install via the XM SureConnect) is best for your vehicle and location. 2. Always do a trial run before installing anything permanently. Temporarily connect all power, audio, and antenna lines. Make sure that you receive the XM signal and that you hear XM programming through your vehicles audio system. You must have your vehicle antenna plugged in to the cradle or the XM SureConnect to receive the signal. TIP: Your MyFi battery will charge in the vehicle cradle only while the MyFi power is turned ON. Please refer to Other Things You Should Know (page 35) for addi-
tional information regarding charging the MyFi battery. TIP: If you experience difficulty obtaining a strong antenna signal based on your particular home setup conditions, a home antenna extension cable (model XMAC1000, sold separately) was designed specifically to help you and is available at www.xmradio.com along with many other cool XM Satellite Radio accessories. Audio quality 28 Use the CASSETTE ADAPTER if your vehicles audio system has a built-in cassette player. 29 Placing the antenna Your XM antenna should be mounted on the vehicles metallic roof, at least 6" from any window or sunroof. Keep excess cable behind or under the dashboard. Avoid crimping, twisting, or chafing the XM antenna cable. Try to use existing holes, body grommets, and other wiring channels. If the vehicle is a hard- or soft-top convertible, you may mount the antenna on the metal trunk lid. It should be at least 4" from the rear window. Ensure that the antenna and cable dont interfere with the opening or closing of the convertible top and the trunk lid. TIP: If you route the antenna cable through the trunk seal, use the lowest part of the weather seal. This should minimize any water leaks. TIP: Dont install the XM antenna inside your vehicle or on a nonmetallic surface. Doing so will likely degrade the signal and you will probably experience more signal interruptions. For a neat, fully integrated installation, use the DELPHI FM DIRECT ADAPTER (model SA10112, sold separately). We recommend that you consult a professional installer. Self Install (XM SureConnect), See the XM SureConnct Installation Guide for more information. 30 31 TOFMANTXMANTTO XMRADIOTO FMRADIOMade in Malaysiaoption2option1 Using MyFi On The Go Your MyFi contains a built-in antenna that works best when your MyFi receiver is upright. Use the belt clip to hold your MyFi in the proper position; laying your MyFi down flat may weaken reception. TIP: If you carry your MyFi in a bag or use it while exercising, you can lock the buttons and dial and prevent something from accidentally pressing the buttons. Press and hold the mute/pause/lock button until you see the lock indicator in the display. To unlock the controls, press and hold the mute/pause/lock button until the lock indicator disappears. TIP: The belt clip doubles as a table stand; just pull out the back leg. TIP: You can plug the AC or cigarette lighter adapter directly into the bottom of your MyFi. Mounting your MyFi on the dash Weve included three types of mounts to help you install your MyFi in your vehicles interior. FLUSH MOUNT: Attach the included adhesive pad to the back of your MyFis vehicle cradle. Stick the vehicle cradle onto a flat surface in your vehicle, preparing the surface as described below. Do not install the mount on a leather surface. Doing so could permanently damage the surface. VENT MOUNT: Assemble the vent mount as shown. Find a horizontal air vent that is strong enough to hold the weight of your MyFi and its cradle. Clip the vent mount into the vent. SWIVEL MOUNT: Find a suitable location; the mount uses a strong adhesive and youll have difficulty repositioning it after installation. Do not install this mount on a leather surface. Doing so could permanently damage the surface. Make sure the air temperature is at least 60F (15C). 1. Clean the mounting surface with the enclosed surface preparation kit. Allow to air-dry. 2. Clean the same surface with the alcohol prep pad. Allow to air-dry. 3. You may warm the adhesive pad using a hair dryer or the vehicles defroster. Place the swivel mount accurately since it will bond on the first try. 4. For best results, do not touch or apply any pressure to the vehicle mount for 72 hours. To remove the swivel mount, first try lifting the adhesive pad with your fingers or a spoon. You may warm it with a hair dryer for 2-3 minutes to help soften the adhesive. Remove any leftover adhesive from the dash surface by rubbing with your finger, or you can use a mild cleaner as recommended by your vehicles manufacturer. Warning: MyFi should be placed in your vehicle where it will not interfere with the function of safety features, e.g., deployment of airbags. Failure to correctly place MyFi may result in injury to you or others if the unit becomes detached during an accident and/or obstructs the deployment of an airbag. 32 33 Signal reception guidelines Your MyFis antenna should have an unobstructed view of the XM satellites in the southern sky. In large cities, XM also has a network of ground repeaters to help increase the signal coverage. Other Things You Should Know Care You should be able to take your MyFi along with you during most of your daily activities. Still, you should remember:
Your MyFi is not waterproof. Avoid splashing it with liquids and never submerge it. Take your MyFi with you when you leave your vehicle, especially on a hot day. Not only can you continue to enjoy XM programming, but youll also prolong the life of your MyFis case, display, and battery. If your MyFi gets dirty, wipe the case with a soft cloth lightly moistened with water, then wipe dry with another cloth. Avoid chemicals such as paint thinner, alcohol, or abrasive cleansers. When the battery Important battery informationplease read Your MyFis battery should be charged before you use the radio. The amount of charge is indicated by the battery level meter in your MyFis display. When youre charging the battery, you will see is exhausted, you will see When you use your MyFi for the first time, charge the battery until the meter indicates its fully charged
. Then use your MyFi until the battery is exhausted. This charge/discharge cycle calibrates the battery level meter so that it accurately reports the state of the battery. Your battery performs best when used and charged in an ambient temperature of between 50F to 90F (10C to 32C). Do not leave your MyFi inside a hot vehicle or in direct sunlight. Batteries gradually wear down and require longer charging times. When a battery no longer holds its charge, you should purchase a new battery. Always use authorized batteries and power adapters. Replacement batteries and power adapters can be ordered online at www.xmradio.com. To prevent injuring yourself or damaging your MyFi, do not disassemble, crush, or puncture the battery. Never allow metal to touch the battery terminals. Your MyFis rechargeable battery should be disposed of properly and may need to be recycled. Contact your local recycler for details. Never dispose of batteries in a fire or in water as they may explode. 34 To remove the battery, follow the steps as shown. Use the clear tab to help you pull the battery out. 35 TIP: Both the home and vehicle power adapters can be used independently from the home stand and vehicle cradle, plugging directly into the MyFi power connector. This feature provides a convenient alternative for battery charging and powered operation when traveling or for using your MyFi away from home. Accessories (sold separately) Were always developing useful and clever accessories for your MyFi. Check out www.xmradio.com or visit your favorite electronics retailers frequently. Troubleshooting Your MyFi should provide you with trouble-free performance without needing any servicing. If it does not appear to be working properly, first try to remedy the problem by following these steps:
1. Attach all connections firmly and securely. 2. Make sure the battery is fully charged. 3. Reset your MyFi by removing the battery cover and inserting a paper clip into the hole marked RESET at the upper left-hand corner of the case. If you see this on the display:
You should:
NO SIGNAL Cause: The XM signal is being blocked. Move your MyFi away from obstructed area, e.g., an underground garage. ANTENNA Cause: Possible problem with the built-in or external XM antenna. Connect the external antenna. Make sure the cable and connector are not damaged or kinked. Cause: When using home stand or vehicle cradle, home or vehicle antenna is not plugged in. OFF AIR Cause: The channel is not currently broadcasting. LOADING Cause: Your MyFi is acquiring audio or program information from the XM signal. UPDATING Cause: Your MyFi is being updated with the latest encryption code. Cause: You may have tried to tune to a channel that you have blocked or that you cannot receive with your subscription package. Make sure the home or vehicle antenna is plugged into the home stand or vehicle cradle. Tune to another channel. This message should disappear in a few seconds in good signal conditions. Simply wait a few seconds until the update is done. To receive that channel, contact XM Satellite Radio at 1.800.967.2346. 36 37 If this happens:
You should:
If this happens:
You should:
Your MyFis controls do not respond. The display does not change or the backlight does not turn on or turn off. Battery level meter doesnt match the charging or expected playback time. Check whether the lock indicator is being displayed. If so, unlock the controls by pressing and holding the mute/pause/lock button until the lock indicator disappears
(see page 33). If you have unlocked the controls and they still do not respond, reset your MyFi by carefully inserting the tip of a paper clip into the RESET hole under the battery cover. You can also reset your MyFi by removing and reinserting the battery. Reset your MyFi by following the procedure above. Fully charge the battery, then use your MyFi until the battery is fully exhausted. This calibrates the battery level meter. There is no power, or your MyFi shuts off quickly. Insert your MyFi into its home stand and plug the AC adapter into the wall to charge the battery. Your MyFis battery is low
(see page 12). You do not receive all XM channels you have sub-
scribed to. Contact XM Satellite Radio. Your MyFi may not be activated
(see page 14). Audio sounds distorted when using the built-in FM transmitter. Reduce audio output level
(see page 21). Audio is too soft when using the built-in FM transmitter. No audio when using the home stand that is con-
nected to a stereo system. You cannot tune to a channel. No song title or artist name displayed. Increase audio output level
(see page 21). Check to see if you have plugged the AC adapter into the home stand. The audio line output only works when the AC adapter is plugged in. Check that you have not chosen to skip that channel (see page 26). If the problem persists, contact XM Satellite Radio at 1.800.967.2346. Verify that you are authorized to receive that channel as part of your XM subscription, and that you have not asked XM Satellite Radio to block that channel. Nothing is wrong with your MyFi. That information may be in the process of being updated. On some sports and news channels, there is no title or artist information. No audio when listening through your vehicles FM radio. Make sure that the FM radio and your MyFi are set to the same frequency (see page 23). Audio has static while listening through your vehicles FM radio. Change to another FM frequency
(see page 23). If the problem persists, you probably live in an area with few vacant FM frequencies. You may want to change to a hard-wired FM transmitter (see page 29). Audio on XM Instant Traffic and Weather channels sounds different from other XM channels. Nothing is wrong with your MyFi. These channels use a different audio technology than the other XM channels. 38 39 Contacting Technical Support and Customer Service For additional information in solving problems with your MyFi, contact Delphi Technical Support at 1.877.GODELPHI (1.877.463.3574) 8:00 a.m. to 8:00 p.m. Eastern Time, MondayFriday. Technical Support is also available at www.delphi.com. Technical information DIMENSIONS MyFi receiver: 4.5 in. H x 2.8 in. W x 1.2 in. D
(114 mm H x 71 mm W x 30 mm D) MyFi remote: 4.8 in. H x 1.9 in. W x 1.2 in. D
(122 mm H x 48 mm W x 30 mm D) WEIGHT MyFi receiver: 7.2 oz. (196 g) with battery MyFi remote: 2.9 oz. (82 g) BATTERY MyFi receiver: 3.6 V lithium-ion MyFi remote: 2 AAA cells INPUTS AND OUTPUTS Antenna (home stand and vehicle cradle):
1 RF SMB connector Antenna (MyFi receiver): 1 RF SSMB connector Power: 5 V, 2000 mA maximum current, positive polarity Audio output: 3.5 mm diameter mini-stereo jack Warranty Delphi limited consumer warranty Delphi Product and Service Solutions (Delphi) warrants all XM Satellite Radio Products sold by Delphi (each Product) to be free of defects in material and workmanship, subject to the following conditions:
Subject to express limitations with respect to the battery and ear bud com-
ponents of any Product, the duration of Delphis warranty with respect to each Product is limited to one (1) year from the date of sale to the original consumer purchaser. The duration of Delphis warranty with respect to the battery and ear bud components of any Product is limited to thirty (30) days from the date of sale to the original consumer purchaser. No other express warranties are made with respect to any Product. All implied warranties, including warranties of merchantability and fitness for a particular purpose are limited to the warranty period set forth above. This warranty is not transferable and applies only to the original consumer purchaser of the Product. Delphi will, as its sole obligation under this warranty, replace or repair, at its option, any Product that does not conform to this warranty. Products may be repaired or replaced with new or with refurbished items. This limited warranty does not cover defects in appearance, cosmetic or decorative items, including any non-operative parts. Under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied warranties. These remedies are the customers exclusive remedies for breach of warranty. This limited warranty only extends to customers who purchase the Products in the United States. Delphi will not be responsible for damage resulting from any (i) deviation of Delphis operating instructions as printed in Delphis catalog or on any packaging, labels or other literature provided with a Product, (ii) installation of a Product in a manner which is inconsistent with Delphis written instruc-
tions, (iii) alteration or modification of a Product, (iv) misuse, (v) neglect,
(vi) abuse, (vii) accident, (viii) normal wear and tear, (ix) commercial use,
(x) improper storage, (xi) environmental conditions, including excessive temperature or humidity, (xii) service by anyone other than a Delphi authorized repair facility, (xiii) other improper application, installation or operation of this Product, or (xiv) defects or malfunctions of which Delphi is not advised within ten (10) days of the expiration of the limited warranty period. 40 41 How you (the Customer) can get service To obtain warranty service during the first thirty (30) days after the date of purchase, you must return the defective Product with the original receipt to the original place of purchase. To obtain warranty service during the first thirty (30) days for Products purchased from www.delphi.com and for all Products for the remainder of the limited warranty period, you must contact Delphi by phone at 1.877.GO DELPHI (1.877.463.3574) or by fax at 1.866.790.3675. When contacting Delphi by fax, please include a letter detailing your complaint and a daytime telephone number where you can be reached. If further clarification or additional information is required from Delphi, you may call Delphi at 1.877.GO DELPHI (1.877.463.3574). If warranty service is needed at any time during the warranty period, the purchaser will be required to furnish a sales receipt/proof of purchase indicating the date of purchase, amount paid and place of purchase. Customers who fail to provide such proof of purchase will be charged for the repair/replacement of any Product. How state law relates to the warranty Some states do not allow limitations on the duration of implied warranties, or the exclusion or the limitation of incidental or consequential damages. So the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights. You may also have other rights that may vary from state to state. NO PERSON IS AUTHORIZED BY DELPHI TO MODIFY OR ADD TO THIS LIMITED WARRANTY. 42 43
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-10-16 | 106.7 ~ 107.9 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2007-10-16
|
||||
1 | Applicant's complete, legal business name |
Sirius XM Radio Inc.
|
||||
1 | FCC Registration Number (FRN) |
0007714579
|
||||
1 | Physical Address |
1500 Eckington Place, NE
|
||||
1 |
Washington, Dist of Columbia 20002
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
h******@ATCB.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
RS2
|
||||
1 | Equipment Product Code |
SA10113A
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J****** S****** B******
|
||||
1 | Telephone Number |
(954)********
|
||||
1 | Fax Number |
202-3********
|
||||
1 |
J******@siriusxm.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
XM Satellite Radio, Inc.
|
||||
1 | Name |
J******** B********
|
||||
1 | Physical Address |
1500 Eckington Place
|
||||
1 |
Washington, Dist of Columbia 20002
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
202 3********
|
||||
1 | Fax Number |
202 3********
|
||||
1 |
j******@xmradio.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
XM Satellite Radio, Inc.
|
||||
1 | Name |
J**** B******
|
||||
1 | Physical Address |
1500 Ekington Place, NE
|
||||
1 |
Washington, Dist of Columbia 20002
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
202 3********
|
||||
1 | Fax Number |
202 3********
|
||||
1 |
j******@xmradio.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 11/30/2007 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | XM Satellite RX with FM Transmitter | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
ADVANCED COMPLIANCE SOLUTIONS, INC.
|
||||
1 | Name |
V******** U********
|
||||
1 | Telephone Number |
561-3********
|
||||
1 | Fax Number |
561 3********
|
||||
1 |
u******@fau.edu
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 88.1 | 88.9 | |||||||||||||||||||||||||||||||||||||
1 | 2 | 15C | 106.7 | 107.9 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC