Zero Earbuds Product overview and operation manual O Overview Zero Earbuds is a wearable device for measuring multiple biosignals. It is connected to a smartphone or tablet PC by wireless and can measure 4-channel EEG, 1-channel ECG, and 1-channel angular velocity using the dedicated APP. O Signal processing module Integrated signal processing board :
EEG module, ECG module, Gyroscope sensor O Appearance Overview Device Cradle Internal board Internal board O Specification Charging Voltage and current Operating Voltage Operation Temp. Frequency Size Weight Device Cradle Device Cradle 5Vdc 300mA 3.7Vdc 10 ~ 40 2402 ~ 2480 MHz 67.1 * 47 * 14.2 (), cable 285mm 186.7 * 68.8 * 41.2 33g 210g O Operation 1. Attach the electrode to the device. 2. Turn on the switch on the right side device. If device turn on, the Blue LED blink. 3. Open the ST BLE Demoapplication on the smartphone. 4. Select the EEGS1V1, and click CONNECTbutton. 5. Slide the P2P Notify slider, and the received data will display. If the application works properly, the characters are scrolled on the screen as shown below. 6. Scrolling may be interrupted by temporary disconnection caused by external shock, but scrolling is restored soon, and this is a normal operation. 7. Exit the application for ending test. FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.