FCC ID: ZID-AP301-PT10 PHONE TOASTER

Phone ToasTer English www.aprilstone.com www.instagram.com/aprilstone_official

"" . Features Table of Contents Mobile Phone Sterilization by UV-C LED 6 UV-C LeDs are placed 360 to kill 99.9% of toxic bacteria from the mobile phone in 5 minutes. UV-C LeD with strong sterilizing power destroys the Dna of bacteria and viruses, and neutralizing them. Phone ToasTer is designed in a closed structure that blocks UV-C LeD, it is safe because the LeD will not operate if the phone slot is not closed. Mobile Phone Wired/Wireless Fast Charging at the same time as UV sterilization, the phone charges wirelessly at high speed. Mobile phone sterilization and charging proceed at the same time, so it prevents bacteria and saves time. also, an UsB charging terminal is mounted, it allows fast charging of the mobile phone via wire. It allows charging multiple mobile phones quickly at the same time with wired/wireless fast charging. High Quality Bluetooth Speaker equipped with the latest version of Bluetooth 5.1 chipset, stable data transmission with low power is possible with smart devices. With an output of 8W rated, various contents are reproduced more realistically. enjoy high quality audio by connecting wirelessly to smart devices such as smartphones, tablets and laptops. Analog Alarm Clock The current time and alarm can be easily set using the dial, and the time can be viewed even in dark places with the light switch. Precautions for Safety Product Composition and Specifications Product Composition -----------------------------------------------------------------5 Product specifications ----------------------------------------------------------------5 Part Names and Functions Front side ---------------------------------------------------------------------------------6 Top/Left/Back sides -------------------------------------------------------------------7 Sterilization/Wireless Charging Checking the operation status -----------------------------------------------------9 setting the time/alarm ------------------------------------------------------------- 10 Turn on the clock light -------------------------------------------------------------- 10 Using the Bluetooth Speaker Using the Alarm Clock Wired Charging of Mobile Phone Troubleshooting 4 5 6 8 10 10 10 11 2 3 PHONE TOASTER User ManualMobile Phone Wireless ChargingSterilizer Precautions for Safety Product Composition and Specifications This is to keep the user safe and prevent pr operty damage. Please read carefully before using the Please check the components and specifications before using the product, and use it correctly. Product Composition product and use it correctly. Warning Failure to observe the warnings may result in death or serious injury. Do not look directly at the UV-C LED or let UV rays hit your skin. Direct contact with the light from the UV-C LeD may be harmful to the human body. Do not touch the product or power adapter in operation with wet hands. electric shock may result. Do not allow electro-conductive materials (i.e. metal, liquid, etc.) to come into contact with the power adapter or USB connection terminal. a fire may result from corrosion of the connection terminal or a temporary short circuit. Do not place the product in a high temperature environment, or near heat sources, heating cookware, or high pressure containers. It may cause heat or fire in the product. Be careful not to let children or pets suck or bite the product. There is a risk of suffocation due to damage on the product or small parts. Do not disassemble, repair, or modify at your discretion. There is a risk of product failure or electric shock. Caution Failure to observe the precautions may result in personal injury or property damage. Do not drop the product or give strong impact to it. The product may be damaged. Do not apply excessive force to the sterilization/charging lever. The product may be damaged. Do not force your phone into the slot. The product and mobile phone may be damaged. Remove accessories such as thick cases and straps from the phone and insert it. The product may not operate normally. Do not insert anything other than mobile phones into the product. The product may malfunction. Do not use the product for any purpose other than its intended use. The product may malfunction. Be careful when cleaning the product. Be sure to disconnect the power adapter before cleaning the product. Do not put the product into water. Do not use thinner, alcohol or cleaning spray. When cleaning the product 4 s connection terminal, wipe it with a cotton swab or soft cloth. PHONE TOASTER Power Adapter User Manual Product Specifications Product Name PHONE TOASTER Model Name AP301-PT10 Sterilization Method 6 UV-C LEDs (Max. 20,000 hours of use) Input Power DC 12 V, 2 A (Max. 30 W) Temperature Operation

-10

~ 50 Storage

-40

~ 85 Size (WxHxD) 232 mm x 154 mm x 110 mm Weight PHONE TOASTER : 1180 g 20 g Maximum Size of Mobile Phone 80.8 mm x 172.3 mm x 11.9 mm Wireless Charging 9 V, 1.7 A, 15 W, Fast Charging Frequency: 125 KHz USB Charging USB-A Type, 9 V, 1.7 A, 18 W, Fast Charging Bluetooth Speaker 8 W/4 , 5.0VER BDR, EDR Frequency: 2.4 GHz 5 Mobile Phone Wireless ChargingSterilizerPHONE TOASTER User Manual Part Names and Functions Front Side Top/Left/Back Sides 8 7 6 5 1 2 3 1 2 3 4 Number Name Functions 1 Speaker Bluetooth. Output the sound from a device connected via 2 Volume Control Bar Adjust the volume of the Bluetooth speaker. 3 Timer Setting Bar Set the sterilization/charging time. 4 Status Light Indicate Bluetooth, sterilization and wireless charging status.

: Indicate Bluetooth pairing

: Indicate Sterilization

: Indicate Wireless charging 5 Clock Light Switch Turn the clock s light on or off. Bluetooth Connection 6 Switch Turn the Bluetooth connection on or off. 7 Alarm Setting Dial Set the alarm time. 8 Time Setting Dial Set the current time. 6 6 5 4 Number Name Functions 1 Mobile Phone Slot Insert the phone for sterilization/wireless charging. 2 Alarm Stop Button Turn off the alarm sound. Sterilization/Charging Start or stop sterilization and wireless charging of the 3 Lever phone. 4 Power Button Turn the product on or off. 5 USB Charging Terminal Connect the USB-A cable to charge the phone. Power Adapter Connect the power adapter to supply power to the 6 Connection Terminal product. 7 Mobile Phone Wireless ChargingSterilizerPHONE TOASTER User Manual Sterilization/Wireless Charging This product is a mobile phone sterilizer using UV-C LeD. not only sterilize the phone, but also wirelessly charge it at the same time. Check Before Use Make sure if the product is powered. Make sure if the Sterilization/Charging Lever is raised all the way. Make sure if the inside of the product is empty. 1 Place the mobile phone horizontally in the slot with its front facing forward. 2 Use the Timer Setting Bar to set the sterilization/wireless charging time. It is set to quick mode when the Timer Setting Bar is lowered to the bottom, and sterilization proceeds for 5 minutes in quick mode. Sterilization proceeds for 15 minutes in normal mode. When the timer ends, the mobile phone comes up with the Sterilization/Charging Lever. 3 Slowly lower the Sterilization/Charging Lever until a click sound is heard to fix it. The mobile phone slot is closed, and then it starts to sterilize and charge wirelessly. 4 To stop during operation, press the Sterilization/Charging Lever again until a The Sterilization/Charging Lever is raised and the operation stops. sound is heard. click When the Sterilization/Charging Lever is down, the time does not change even if the Timer Setting Bar is adjusted. The product does not operate when the mobile phone slot is open, and it stops if the mobile phone slot is opened during operation. Checking the operation status It is possible to check the operation status through the LED indicator on the front of the product.

(Sterilization) LED

(Wireless Charging) LED Standby for sterilization: LED off During sterilization: LED on (15 minutes) Sterilization completed: LED off Operation error: LED blinks (quickly) Standby for charging: LED off While charging: LED on Charging completed: LED on Operation error: LED blinks (quickly) 8 9 Mobile Phone Wireless ChargingSterilizerPHONE TOASTER User Manual Using the Bluetooth Speaker Troubleshooting 1 Turn on the Bluetooth Connection Switch. In the pairing standby status, the

(Bluetooth) LED blinks slowly. 2 Select PHONE TOASTER on the device to be connected. When pairing is complete, the

(Bluetooth) LED on with a beep sound. After initial connection, turn on the Bluetooth Connection Switch to automatically connect with the last paired device. It is possible to connect to other devices via Bluetooth only when there is no device connected to the product or the Bluetooth connection is disconnected. When a Bluetooth device is already connected, pairing detection is not possible. Using the Alarm Clock Setting the time/alarm Use the Time/Alarm Setting Dial to set the current time and alarm. When the power is cut off, the clock stops after running for a certain period of time, so you need to set If an alarm is set, it is possible to turn it off by pressing the Stop Alarm button. (The alarm does not the time again. sound when the button is being pressed.) Turn on the clock light If the surrounding is dark, it is possible to use the Clock Light Switch to turn on the clock. Wired Charging of Mobile Phone Problems Confirmation and Measures It does not operate at all. Make sure if the power is properly connected. The power is on, but the sterilization indicator does not light up. Make sure if the mobile phone slot on the top of the product is closed well. The mobile phone does not come out. Remove the power and remove the mobile phone manually with the slot opened. The sterilization indicator is turned off after 15 minutes. This product is sterilized for up to 15 minutes. If further sterilization is required, operate it again. The charging indicator is off. The foreign substance on the mobile phone has not disappeared. For mobile phones with wireless charging function, make sure if the phone is placed in the center of the slot with the phone facing the front. Remove the mobile phone case and insert it into the slot. This product operates only the sterilization function and does not support the cleaning function. FCC Part 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment. FCC Part 15.105 Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by the manufacturer could void your authority to operate the equipment under FCC rules. RF Radiation Exposure Statement :

This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. Check before use Make sure if the product is powered. a standard USB cable. 10 Connect the mobile phone to the USB Charging Terminal on the back of the product using Name of Company : SK Networks Co., Ltd. Manufacturer / Country : Devatec Co., Ltd. / Korea Product Name : PHONE TOASTER 11 Mobile Phone Wireless ChargingSterilizerPHONE TOASTER User Manual

50mm X 40mm NAME : PHONE TOASTER MODEL : AP301-PT10 MFD : Nov-2020 INPUT : 12V 2A A/S(Korea): 070-5147-3993 FCC ID : ZID-AP301-PT10 WARNING : FCC Part 15.19 KC ID : R-R-SKn-PT10 006-xxxxxx This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

[Label Location]

FCC Agent Authorization letter October 30 2020 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 LETTER FOR AUTHROZATION FCC ID : ZID-AP301-PT1O To Whom It May Concern:

I, the undersigned, hereby authorize Lab Manager Hyunchae, You of SGS Korea Co., Ltd. and hereafter referred to as SGS Korea, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Lab Manager Hyunchae, You (or Jinhyoung Cho) of SGS Korea Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing SGS Korea as our agent, we still recognize that we are responsible to:

a) d) comply with the relevant provisions of the certification program;

make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect of the scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product f) h) k) FCC Agent Authorization letter which the Certification Division may consider misleading or unauthorized;

upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

use certification only to indicate the products are certified as being in conformity with specified standards;

endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

keep a record of all complaints made known to the us relating to the product's compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

Document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely yours,

(Sign) Name/Title : Jonggeun Lee / Manager Company Name : SK Networks Co., Ltd.

a) b) c) d) e) f) g) SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration 4, Maesan-ro 52beon-gil, Paldal-gu, Suwon-si, Gyeonggi-do, Republic of Korea Applicant Legal Business Name SK NETWORKS CO., LTD. Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name ZID ZID-AP301-PT10 Jonggeun Lee xtyle@sk.com

+82 10 4587 2006 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date: 2020-12-18 Print Name:

Title:

Jonggeun Lee Manager

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

FCC Confidentiality Request Letter December 18, 2020 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 RE : Request of Confidentiality for FCC ID : ZID-AP301-PT10 To Whom It May Concern:

Pursuant to Sections 0.457 and 0.459 of the Commissions Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, SK Networks Co., Ltd. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give SK Networks Co., Ltd. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows:

Permanent Short-Term CONFIDENTIAL LIST 1 2 3 4 5 6 7 8 Block Diagram Operational Descriptions Schematics Tune-up procedure External Photos Internal Photos Test-Setup Photos Users Manual FCC Confidentiality Request Letter The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely yours,

(Sign) Name/Title : Jonggeun Lee / Manager Company Name : SK Networks Co., Ltd.

a 4

L _

(Signature1) Title: Sone oy On behalf of: SGS Korea Co. Ltd. (Company Name) Telephone: +82-31-428-0903 FCC ID: ZID-AP301-PT10 Cfo lonilore Theres a AP301-PT10 that would like to have your authorization as an Inductive wireless power transfer applications approval. The specific product as below, AP301-PT10, with its designed features and specified description, considers special requirements for KDB 680106 DO1 v03 section 5, b) requirements. SOUT E Les PHONE TOASTER AP301-PT10 ZID-AP301-PT10 Product Name:

Model Number:

FCC ID:

OM RUS UME Cortes iste

(1) Power transfer frequency is less that 1 MHz

(2) Output power from each primary coil is less than ce RES

(3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils

(4) Client device is placed directly in contact with the transmitter

(5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion).

(6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Sincerely, he SK NETWORKS CoO., LTD Date: 15 Dec, 2020 Product Technical Specification:

0.1101 0.150 MHz 15 W OU areesom Alon TCO inetsae SEEDER OUT) tc primary coils are to detect and allow only between individual pairs mee lke Client device is placed directly in contact with the transmitter. Mobile conditions only H-Field: 0.147 A/m (at 15 cm)

< 0.815 A/m (50% of the limit) Jungmin Yang

(Print name) Result:

Complied Complied Complied Complied Complied Complied Cover Letter-Wireless Charger Approval