digital basics Bluetooth earbu In-Ear Bluetooth Headphones Product Description 1. Ear Piece 2. Volume Up / Skip to Next Song 3. Power Button (ON/OFF) / Pause/Play Answer / Hang-up Call 4, Volume Down / Previous Song eR How to place the headset on your ears 1. Hang the neck band over the back of your neck. 2. Gently insert the earbuds into your ear ensuring a comfortable fit. 3. Do the same for the other ear. NOTE: There is a small L and R on the earbuds indicating which side ear the buds should go into. Using your Bluetooth Headphones Pairing Your Earbuds For the First Time NOTE: Make sure you fully charge your Bluetooth Earbuds prior to pairing. 1. On your mobile device or computer, make sure your Bluetooth is on. 2. Place the Bluetooth Earbuds in your ears. NOTE: You can connect your Bluetooth Earbuds to more than one device however not at the same time. For example, you can pair them to your mobile phone as well as your computer however if you have them connected to your phone, you cannot connect them to your computer at the same time. Charging the Built-In Battery
+ Charge your Bluetooth Earbuds by using the included USB charging cable. Note: The LED light is lit red while the battery is charging.
+ The LED light is lit blue when the battery is fully charged.
+ It takes around 1.5 - 2 hours to fully charge the battery. 1. Connect the USB charging cable to the unit. QUICK START GUIDE 3. To turn ON, press the center Power Button on the controller unit for 3-5 seconds. 2. Connect the USB charging cable to your PC or USB wall charger. A blue & red light will appear and a voice prompt says Powering On. Ensuring a Good Fit Then you can now release the power button. | | |
Package Contents: g 4. On your Bluetooth device, select Air Earbuds * When the battery is low, you will hear a voice prompt that
* To enjoy better sound quality and comfortable fit, change the size of the earbuds | | says Battery is Low,Please charge, and the LED light will 1 x Bluetooth Earbud Headphones that best fit in your ears. DO NOT force the earbuds in. When changing earbuds 6. Once your Bluetooth Earbuds have been successfully paired, you will hear a A hi : hil di , ill ff and UxiMico Se Charging Cable with the additional silicone earbuds, rotate while pressing down to install firmly on voice prompt that says Connected blink red. After a short while, product will turn off and you 1 x Extra Sizing Silicone Earbuds pr 9 oo y ' A - will hear a voice prompt that says Powering Off 1 x Users Manual your headset and prevent the earbud from detaching and remaining in your ear. Your Bluetooth headphones are now paired to your device. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the Basic Operation Battery Information following two conditions:
To turn ON, simply hold down the power button for 3 - 5 seconds and you will hear a voice prompt that says Powering On. If the device is already paired and your Bluetooth on your device is ON, the LED light will quickly flash blue/red and you will hear a voice prompt that says Connected.
+ To Turn OFF, simply hold down the power button for 3-5 seconds. You will hear a voice prompt that says Powering Off. The LED light will turn red for 1 second.
+ To Answer a call, quickly press the center power button to accept the call.
+ To End the call, quickly press the power button once.
+ You can make a call by quickly pressing the power button twice it will redial your last call.
+ To Pause / Play music, simply tap the center power button once (quickly). Note - This function will only operate if your music playing application is open. Otherwise, it will dial the last number you dialed.
+ To increase volume: Hold down the volume up button; to decrease volume, Hold down the volume down button. When you have reached the maximum volume, you will hear a brief tone which indicates you have reached the maximum volume level.
+ To skip a song, quickiy press the volume up button for 2 seconds and you'll go to the next song.
+ To replay a song, quickiy press the volume down button for 2 seconds and it will replay the previous song.
+ DO NOT leave a fully charged battery connected to a charger; overcharging may shorten the battery life.
+ If left unused a fully charged battery will lose its charge over time.
+ NEVER use any charger that is damaged.
+ NEVER leave your Bluetooth Earbuds in excess heat. Store in a cool, dry location. Bluetooth is a registered trademark of Bluetooth SIG Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc.. All other trademarks and trade names are owned by their respective owners. 2019 by Digital Gadgets, LLC digital basics
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. lIncrease the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposurere quirement. The device can be used in portable exposure condition without RF striction.