Bluetooth Headset M103 User Manual Contents:
1.Product Overview --------------------------------------------------------------1 2.Basic Operation ----------------------------------------------------------------2 3.Bluetooth Pairing and Connection ------------------------------------------- 3 4.Connection with Two devices ------------------------------------------------ 4 5.LED Indicator ---------------- ------------------------------------------------- 5 6.Charging ---------------------------------------------------------------------- 6 7.TT Voice prompt tone ---------------------------------------------------------8 8.Product Specification ----------------------------------------------------------9 9.Attentions and Q & A ---------------------------------------------------------10 10.NOTE: -------------------------------------------------------------------------12 1. Product Overview:
Package Contents A. Bluetooth Headset RKING1000 x 1 B. Type-C charging cable x 1 C. User manual x 1 D. Car Chargers x 1 E. Sponge microphone cover x 1 F. Drawstring bag x 1 2. Basic Operation:
Button Function Operation Instruction Power On Power Off In off state, long press the multi-function button for 2 seconds to start up, and the startup prompt tone is "Power on". In on state, long press the multi-function button for 3 seconds to shut down, and the power-off prompt tone is "Power off". Enter into Pairing Mode Turn on the phone and Bluetooth, search "M103" Bluetooth device, and click "M103" for pairing. After a few seconds, you hear a tone indicating that pairing is successful. The LED turns to blue and blinks slowly (the blue light blinks once for 10s). Play / Pause When playing music, press the MFB to pause / play music Redial a call Double press MFB to dial the last call. Voice dialing Long press 1 second MFB then release. MFB Audio switch When talking, long press the multi-function button for 2 seconds to switch between mobile phone and earphone. A. When an incoming call occurs during a call, press the multi-
function button to answer a new call and hang up the current call. Three-way calling B. Double-click the multi-function button to answer an incoming call and reserve the current call. C. Long press the multi-function button for 2 seconds to hold the current call and reject the new call. D. In a three-way call, double-click the multi-function key to switch between the current phone and the reserved phone Answer a call Short press (when call coming) Hang up a call Short press ( during a call ) Reject a call Long press 1 second (when call coming) Volume +
Volume -
Volume Up During a call/music, short press the volume plus key to increase the volume (press to the loudest and continue to press the volume plus key, and the prompt sound "di" will appear) Next Song Music Status Long press volume plus key for 1 second to switch to the next song. Volume Down During a call/music, press the volume reduction button to reduce the volume. Previous Song Music Status Long press the volume down key for 1 second to switch to the previous song. Mute Microphone mute To mute a call, press the mute button. To unmute a call, press the mute button again. 3. Bluetooth Pairing and Connection:
A. Power off state, long press the multi-function button for 2 seconds after the power on, red and blue flashing alternately. B. Turn on the bluetooth of the mobile phone and click Search. When "M103" appears, click Pair connection. After the connection is successful, the LED turns blue and blinks slowly. C. You can use the multi-function button, volume increase button, volume decrease button on the Bluetooth headset to control the answering and ending of the phone, the playing/pausing of music, up and down, volume increase and decrease, and other functions. 1 Pairing: In off statusLong press MFB 2 seconds to enter pairing mode with LED Blue
& Red alternately flash. 2 Connection: Search and click to connect M103 on your phone Bluetooth lists 4. Connection with Two devices:
The mobile phone connected with M103 is divided into A and B;
First connect machine A, hold down the multi-function button for 2 seconds and then start the machine, flashing red and blue alternately. Then enter the pairing mode, turn on the Bluetooth function of machine A and search the device, search "M103" and click to connect. After the connection is successful, turn off the Bluetooth function of machine A, and M103 enters the pairing state again. Then use phone B to pair with M103 and follow the method of phone A to pair. After the pairing is successful, turn on the Bluetooth function of phone A and click M103 to connect
(some mobile phones may have automatic connection function).
* Music from one mobile phone can only be played when paired with two. To play music from another mobile phone, you must first pause or turn off the music from the previous mobile phone. The same is true for calls. 5. LED Indicator Mode Power on Power off LED Indicator LED Blue flash 2 second LED Red flash 2 second Pairing mode LED Red & Blue flash alternately Connected standby mode LED Blue flash once every 10 seconds Playing Music LED Blue flash once every 10 seconds Talking LED Blue flash once every 10 seconds Delete paired record Red and blue LED lights up for 1 second Charging Solid LED Red (Charging in the boot state will overlap with the Bluetooth function status light, which is a normal phenomenon) Full charged LED Red turn off, LED Blue turn on Low battery Red LED flash 6.Charging When the M103 is low, the red light blinks. Please charge it immediately. About 2 hours after charging, when the red light is off and the blue light is on, the battery is fully charged. Charge Connections charging cable. Connect to M103 through the Type_C connector of the Type_C Charging port, USB head connected to USB charger (car charge, travel charge, computer USB, etc.) 1. Pls charge the M103 at least one time every 2 months when dont
*Note:
use it. 7.TT Voice prompt tone TT Voice prompt tone Mode Power on Pairing Paired Power off Mute on Mute off Power on Pairing Paired Power off Mute on Mute off Connected Your headset is connected Disconnected Your headset is disconnected 8.Product Specification Bluetooth Version Bluetooth Chipset Operation Range Bluetooth Protocols Charging Time Talking Time Working Time Bluetooth V5.0 QCC3024 10 meters HSPv1.2 HFP v1.6 A2DP v1.3 AVRCP v1.5 About 2 hours About 33 hours(70% volume) About 35 hours(70% volume) Headset Net Weight About 223g Headset Dimension 197.54*18174.78*68.55mm
*Actual use time will differ from environment and music 9. Attentions and Q & A A How to return connection? What if I can't connect back?How to reconnect the remote disconnection?
When the M103 is connected to your mobile phone successfully, it will automatically connect to your mobile phone every time you turn on the phone. If the connection fails, please connect the M103 to your phone again.After 10 minutes, the headset will be automatically turned off. After being disconnected from a distance, you will report Your headset is connected only once. B. How to delete paired records?
Press the MFB and volume - on the earphone for 5 seconds at the same time to clear the pairing record in the earphone. If the pairing record is cleared, the connection cannot be called back, and you need to re-pair the connection. C. Whats the password for pairing?
Some connection devices require password for pairing, pls try 0000 or 8888 or 1111 or 1234. D.What devices could charge for the headphone?
As long as the DC voltage meets 5V, current above 500mA car charger, travel charger, computer USB, etc., can charge the M103. E. How to do if can not power on or connection problem?
You can try charging reset, the method is: plug in the charging cable to charge, you can complete the reset shutdown, restart after the normal use. If it still cannot be used normally, contact customer service or the manufacturer for technical support. F. Why power off automatically?
No connection for over 10 minutes or battery voltage is less than 3.1V. G.How does a three-way call work?
Short press the multi-function button to answer a new call and hang up the current call. Double click the multi-function button to answer the new call and reserve the current call. When calling, long press the multi-function button for 2 seconds to hold the current call and reject the new call;
In a three-party call, double-click the multi-function key to switch between the current phone and the reserved phone. 10.NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.