CUASOO Wireless Transmitter& Receiver Model : KH-26 User Manual Charging 1.Connected the micro-USB end of the cable to the charging port of the bluetooth receiver 2.Plug the USB end of charging cable to a USB charging port or any active USB port 3.LED indicator will tur red when charging and will automatically turnoff when fully charged, eS charging wih Micro USB 1LPls don't tum it on before fully charged, and we don't advise you use it when itis charging, it may affect the battery life 2We recommend charging the unit for at least 2 hours before using it for the first time. 1 Product Overview ~
2Package contents ~
3,Product Specification -
Basic Operation ----
4.1 Use as Transmitter 42 Use as Receiver ~
SHow to use 6.How to pairing ~~
6.1 Pair in TX mode:
62 Pairin RX Mode Pair with two devices atthe same time 7A In TK mode 72 In RX mode Care and maintenance 1 Set the BTI-016 to TX mode and connect it to your audio transmitting device. 2Place your bluetooth audio receiving device within a3 feet/1 meter range and set it to paring mode. 3.Press and hold the power button for 3 seconds and tap twice to enter pairing mode (If BT1-016 do not connect any device before it wll auto in pairing mode after power on). A. Wireless Transmitter Receiver x 1 B. 355mm Audio Cable x 1 C.USB Charging Cable x 1 3.5mm Female to 2 RCA Male Cable xt User Manual x 1 6.2 Pair in RX Mode Press and hold the power button of the adapter for 3 seconds, it will start paiting 1 Activate the bluetooth function on your phone and search for the nearby Bluetooth devices:
For i0S: Setting > Bluetooth > On For Androic: Settings > Wireless & Networks > Bluetooth:On > Scan for devices 2Find "BTI-016" in the search results and tap on it to connect. Once connected, the LED indicator will turn sold blue, The adapter enters pairing mode automatically when powered on for the first time. Tae original paring memory will be cleared after a mode switch It will automatically start pairing each time when powered on. Ifa PIN code is required for paiing, try 0000, 8888, 1111 or 1234, The adapter can remember two recently paired devices and will automatically, without
{going into pairing mode. Tem Ne: arate Bietooth Version v5.0 Bletooth Chipset SRBCEETO 4d Use as Transmit 42 Use as Receiver Fonation Operation Funation Operation When power off press and hold the power button for Power on Sane When power off press and hold the power button for Power on 2:3 seconds Operation Fequency 2a02Gre 2400GH About hours (|
About hours (D0 About 2 hours
[AZDP AVRCP Working Time Charging Time Bustooth Profle When power on, press and hold the power button for Fowsteft 2:3 Seconds Wien power on, press and hold the power button for fone i 2:3 Seconds When powered on, pres the power button tice to Paling start Ping When power on, press the power Button twice to start ena paving When power of sich the TK mode and long press the Senne. power button for 3 seconds to power on Wien power off svtch the AX made and ong press the ee aah power button for 3 seconds to pomer on Password forconnecion | 000, 1171, 1234, 6886 TX: apt Low Lateney, 90% SBC RX: pth Low Latency. apt, SBG AAC Range 33h/10m dio Codec Short Press Power button to reconnect taal connected devices If no connected afte 12 seconds wl ato in paring mode. Reconnect all connected devices When power off press and hold power buon T seconds Clear pai ist wil cles all connected deve information IN RX mode, Press the power bution once to playipause Short Press Power button to veconnect tall connected cevies If no connected ate 12 seconds wil ato in pring mode, Play/Pause Reconnect to all connected devices Battery Capacity Charging Power Operating Temperature 160 mA Lithium polymer Battery 327
'SVDG100-240V AC adapter, 23000. 055 Weight About 145g When power on press power button and charging wil reset the device Device wil auto power off battery lone han 3.1 eset Ato Power OF Tito Power OFF Device wl ato power off battery loner than 3.1 Device wil have ow battery alarm every 3 minutes if battery lower than 33V Low battery Alarm Device wil have low batey alarm every 3 minutes Low barery arm T patery lower than 3.3 Dimension 6mm'33 29.7 LED indiestore Sats 7.1 In TX mode:
The adapter is able to pair with two bluetooth stereo earphones/speaker at the same time. 1. Follow the previous instructions in the Pairing selection to pair the BTI-016 with your frst device. 2. Tum off the "Bluetooth" function on your frst device, tap the power button twice to pair and connect to your second device 3. Tum on the bluetooth function on your frst device. In approximately 12 seconds, the first device will automatically connect in Notes:
When you pair with two devices, both can play music at the same time, The adapter will automatically re-pair when powered on. 7.2 In RX mode:
The adapter is able to pair with two bluetooth devices atthe same time. 1. Follow previous instructions in the pairing section to pair the BTI-O16 with your first device. Disable the Bluetooth function on your fist device. Tap the power button twice to pair with the second device. 2. Turn on the bluetooth of the frst device, now BTI-016 adapter is successfully paired with both two devices. Notes:
Only one device can play musi at any time. You have to stop the music on tone device to play on the other. The adapter will automatically re-pair when powered on
\When connecting a phone, the Bluetooth receiver cannot be used when answering and making a call Solid Red LED ED OFF Fully charge Facing Red and ale | Paring Charging TED nda Status Sold Red LED LED OF Fully charged ashing Red and Blue [ pang Flashing Red Low battery Solid Blue 1 Successfully Paved Charging ashing Red Toa battery Solid Blue LD Successful Pred Flashing lve
{Greer Second _| Powered on but not pared wth Bluetooth devices ashing Blve
(Every 1 Second) Sofi Blue 1 Powered on but nat pated with Bluetooth devices Paired bik Standby Sod Bue 1 Flashing Blue tice
(Every 3 seconds) Pare bik Standby Unpired and Standby 4 Keep the adapter away from heat and humidity. Do not expose the adapter to direct sunlight or extreme heat. Do not try to take the adapter apart. It may cause serious damage. Do not drop or knock the adapter on hard surfaces as it damages. the interior circuit. Do not use chemicals or detergents to clean the product. Do not scrape the surface with sharp objects. FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's, authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferencein a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this, equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.