FCC ID: REY-STB001 LocusTag

LocusTag Model: STB001 User Manual

(V1.0) Item Overview Strap connection hole Button Battery cover groove Operation Press the button Once, until you hear a ringing chime. Press the button four times rapidly. and then hold it a fth time until you hear a ringing chime. Function Re-enter the pairing state Factory Reset Get Started 1. Remove the battery insulating tab. 2. Tap Items in the Find My app, tap , then choose Add Other Item.

3. The Find My app is searching your item, then tap Connect. 4. Enter a name, choose an emoji and follow instructions from the app.

*The Find My app requires an iPhone or iPod touch with iOS 14.5 or later, iPad with iPadOS 14.5 or later, or a Mac with MacOS 11.1 or later.

* The device will leave the pairing state and turn o when there is no operation with pairing within 3 minutes, and Find My app cannot bind it at this time. Re-enter the pairing state by pressing the device button once, you will hear the beeps from LocusTag then rebind it. Reset your item 1. Tap Items in the Find My app. 2. Remove the item from your Apple ID Optional:

Tap the item you want to remove. Swipe to the bottom of the screen and tap Remove Item, then follow the onscreen instructions. Cell swipe to delete the item you want to remove. 3. After successfully removing the LocusTag from Find My app, press the LocusTag's function button four times rapidly, and then hold it a fth time until you hear a ringing chime.

*If the item is registered to someone elses Apple ID, they need to remove the relevant tag before you can add it.

*LocusTag does not reset itself if it is outside the Bluetooth range of your iPhone, iPad, or iPod touch, even if the tag is removed from your Apple ID. You need to reset the LocusTag manually as above, then reconnect it to your device. Replace the Battery 1. Pry the back cover o with a plastic opening tool, or your ngernail in the groove on the side of the device. 2. Install a new CR2032 battery then close the back cover.

CR2032

CR2032 Note:

*The built-in battery is non-rechargeable. Please replace battery only with CR2032. Important tips Ensure your phone connects to the Apple server before pairing LocusTag on the Find My App. The failure of pairing may be due to the network, the following operations are recommended:

Change your phone's network: switching between WLAN and Cellular data. Factory reset your LocusTag. Re-pair the device on Find My App. Specication Name: LocusTag Model: STB001 Size: 36x36x7.5 mm (1.42x1.42x0.30 inches) Weight: 10 g (0.35 oz) Speaker: Build-in Buzzer Battery: CR2032 Battery Life: More than 1 year Sensor: Accelerometer Operating Ambient Temperature:

20 to 60 C ( 4 to 140 F) System Requirements and Compatibility: Apple ID iPhone and iPod touch models with iOS 14.5 or later iPad models with iPadOS 14.5 or later Works with Apple Find My The Work with the Apple Find My program allows third-party products to use Apple's Find My network's private and secure nding capabilities. The program opens up the global Find My network to MFI* certied third-party manufacturers to build products to use the Find My app to locate and keep track. There is a "Works with Apple Find My" badge on websites or product packaging to identify the certied products or accessories:

Proudly, SkyRC is one of the certied manufacturers!

What is MFi ?

Made for iPhone (MFi) is a program curated by Apple to allow third-party manufacturers and developers to make authorized accessories for Apple devices such as iPhone, iPod Touch, and Apple Watch. In exchange for such program, Apple will allow the manufacturers to use the appropriate badges, sell them through both physical and online stores. To apply for the program, Apple will scrutinize the company and the product for certication. Warnings 1. Radio waves are generated by this device could interfere with implantable or personal medical devices, such as cardiac pacemakers, cochlear implants, hearing aids when used nearby. Keep a distance of at least 15 cm from the device. For added assurance, please also consult the restrictions on the use of this device provided by its manufacturer. 2. Please use this product within the range of -20C to

+60C(-4F to 140F), it may result in device unable, re or explosion when the ambient temperature is too high or too low. 3. This product contains a coin cell battery. Do not drop, push or puncture battery. External pressure may lead to battery internal short-circuit and overheating, leakage, re or explosion. 4. Attached battery is not rechargeable, only CR2032 battery available to replace, using other type battery may be an explosion risk. 5. Do not expose batteries to ames, explosion or other hazards. 6. Do not use sharp tools to take out the battery. 7. Keep the device, accessories dry and away from moisture, dust. 8. Do not use if the compartment is not closed securely, please keep the battery out of children's reach. 9. This product includes a coin battery and accessories, please keep the battery out of children's reach. Swallowed batteries may cause chemical burns to a child's esophagus in just 2 hours, even leading to death. Seek immediate help. 10. Avoid skin or eye contact with leaking battery acid. If the skin, eye is splashed with battery acid, Call the local poison control hotline for help immediately. 11. We encourage used device and battery recycling. Do not dispose the batteries as household waste. Improperly disposed batteries contribute to explosion, contact your local or regional waste administration with more information on the collection systems for e-waste. Legal Requirement Use of the Works with Apple badge means that a product has been designed to work specically with the technology identied in the badge and has been certied by the product manufacturer to meet Apple Find My network product specications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards. FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Declaration Of Conformity European Notice Hereby, Revogi Innovation Co., Ltd. declares that this product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU, 2011/65/EU. This product must not be disposed of as normal household waste, in accordance with EU directive for waste electrical and electronic equipment

(WEEE-2012/19/EU) . Instead, it should be disposed of by returning it to the point of sale, or to a municipal recycling collection point. Made in China Manufacturer: SkyRC Technology Co.,Ltd. Address: Floors 4,5,8, Building 4, Meitai Industrial Park, Guanguang Road, Guanlan, Longhua District, Shenzhen, China Warranty Terms Within the period of warranty, if the product fails with no fault of user operations, it will be repaired at Revogi's expense. The warranty will not cover product failure in examples below:

1. Intentional damage to the product by the user or third party. 2. Failure to operate or maintain the product following the

(QIG) Quick Installation Guide Instructions. 3. Failure by natural wear and tear including but not limited to scratching, corrosion, oxidation and rusting. 4. Failure by non-authorized repair of the product including but not limited to user's own or third-party repairing attempts or modications.

*Actual product may vary from the description in this instruction due to product upgrade.

SkyRC Technology Co., Ltd. Section 2.911(d)(5)(i) Certification Equipment Type Company name: SkyRC Technology Co., Ltd. Address:4,5,8/F, Building No.4, Meitai Science Park, Guanguang South Road, Guihua, Guanlan, Longhua District, Shenzhen 518110, China Product Name:LocusTag FCC ID: REY-STB001 Model(s):STB001 2.911(d)(5)(i) Equipment Type We, [SKYRC Technology Co., Ltd.] certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Signature:

Name: Jun Meng Date:

2023.5.12 Title and Company name: Manager / SkyRC Technology Co., Ltd. NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

SkyRC Technology Co., Ltd. Section 2.911(d)(5)(ii) Certification Applicant (Covered List) Company name: SkyRC Technology Co., Ltd. Address:4,5,8/F, Building No.4, Meitai Science Park, Guanguang South Road, Guihua, Guanlan, Longhua District, Shenzhen 518110, China Product Name:LocusTag FCC ID: REY-STB001 Model(s):STB001 2.911(d)(5)(ii) Applicant filing We, [ SKYRC Technology Co., Ltd.] certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Signature:

Name: Jun Meng Date:

2023.5.12 Title and Company name: Manager / SkyRC Technology Co., Ltd. NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.2

SkyRC Technology Co.,Ltd. eee ee eee el Section 2.911(d)(7) USA Agent for Service of Process Company name: SkyRC Technology Co.,Ltd. Address: 4,5,8/F, Building No.4, Meitai Science Park, Guanguang South Road, Guihua, Guanlan, Longhua District, Shenzhen 518110, China Product Name: LocusTag FCC ID: REY-STBO01 Model(s): STB001 2.911(d)(7) USA Designated Agent for Service of Process We, [SkyRC Technology Co.,Ltd.] designate [RCJUICE] '*" for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. 2.911 (d)(7)USA Agent v1.2 SkyRC Technology Co.,Ltd. il USA Agent Company name: _ RCJUICE Address: 1830 Vernon St. Unit 7 Roseville, CA 95678 USA FRN: 0033426248 Contact Name: John Balzowski Telephone No: +1-925-389-1903 Email: support@rcjuice.com Signature: sat Title: or Date: May 12" 2023 Appiicant Company name: SkyRC Technology Co.,Ltd. Address: 4,5,8/F, Building No.4, Meitai Science Park, Guanguang South Road, Guihua, Guanian, Longhua District, Shenzhen 518110, China FCC Grantee Code: REY Contact Name: Jun Meng Telephone No: = +86-755-83860222 Emait. jay@skyrc.com Signature:

Title: Manager Date: _ jz 2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference: Federal Register document 2022-28263 published on 02/06/23 httos:/Avww.federalregister.gov/documents/2023/ 2/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.2

SkyRC Technology Co., Ltd. Agent Authorization Company: SkyRC Technology Co., Ltd. Address:4,5,8/F, Building No.4, Meitai Science Park, Guanguang South Road, Guihua, Guanlan, Longhua District, Shenzhen 518110, China Model Number(s):STB001 Product Description: LocusTag We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Title:

Jun Meng Manager Company: SkyRC Technology Co., Ltd. Date: 2023.3.20

SkyRC Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: REY-STB001 Date: 2023.3.20 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Jun Meng Title: Manager