FCC ID: 2ASTZ-SMARTBOX Smart Box for Auto

Smart Box for Auto Product manual 1 / 4 Catalogue overview ......................................................................... !

Specification parameters ................................................ !

Operating instructions .................................................... !

3.1 Power on the device .............................................................................. 1 3.2 Device Connect ..................................................................................... 1 3.3 Frequency signal reception ..................................................................... 1 after-sale service ............................................................ !

3 overview The Smart Box for Auto series is a hardware device used for vehicle fault diagnosis detection and key programming functions. This device is connected to the standard OBDII diagnostic seat in automobiles to detect the status of vehicle electronic control units and key programming. Specification parameters Name Smart Box for auto Interface BLUETOOTH rated operational voltage OBDII Port 2.4GHz DC 12V Maximum operating current 2A Maximum power consumption 24W Weight 0.3kg Equipment size 190mm*95mm*34mm Ambient Temperature

-20~65 Operating instructions 3.1 Power on the device Insert this device into the OBDII diagnostic seat of the car, the POWER blue power indicator light remains on, and the device is powered on normally. 3.2 Device Connect After the device is powered on normally, the APP connects to the device through Bluetooth, and the TABLET blue Bluetooth connection indicator light remains on. Then functional operations can be implemented on the APP end. 3 3.3 Frequency signal reception Place the car remote control(433.92MHz) near the signal sensing area, and then press the unlock or lock button on the remote control to automatically detect the frequency of the car remote control. after-sale service 4.1 The equipment provides a one-year free warranty service from the date of purchase, and provides 7 * 24 hour technical support. 4.2 After a hardware malfunction occurs, after confirmation by after-sales personnel, the equipment is first sent to the customer's site. After the malfunction is resolved, the customer sends the faulty equipment back. 4.3 The serial number is displayed on the physical nameplate of the equipment. If the customer reports a malfunction, please provide the accurate serial number. 3 reasonable frequency harmful FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide protection againstharmful interference in a residential installation. This equipment generates, with energy uses and can radiateradio and, maycause interference the there thatinterference occur is equipment cause determined by turning the equipmentoff interference Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is harmfulinterference to radio or television reception, which can be user in communications. installation. instructions, guarantee does accordance However, this If thefollowing measures:

radio a encouraged if to in particular installed correct more used one and and will not not the on, the try no by or to to of is connected. Consult the dealer or an experienced radio/TV technician for help. Any Caution:

could void your authority to operate this equipment. modications changes this or to device not explicitly approved by manufacturer 15 part with complies device This conditions:

(1)This interference received, including interference that may cause undesired operation. interference, Operation harmful subject device device Rules. cause may and FCC this not the

(2) to of is the following two must accept any complies equipment FCC This environment. should between the radiator and your body. equipment with This radiation be installed exposure and limits operated set with forth for an minimum uncontrolled 20cm distance

Smart Box Technology LLC 1600 Broadway Ste 1600 Denver Colorado United States Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-8-17 To whom it may concern:

We, Smart Box Technology LLC , hereby certify that the equipment for which authorization is sought

(FCC ID: 2ASTZ-SMARTBOX) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered

(https://www foc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.914(b) and (4)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 DO1 Sincerely, Signature Robert Smith Manager Smart Box Technology LLC

Smart Box Technology LLC Add: 1600 Broadway Ste 1600 Denver Colorado United States Date: 2023-8-17 FCC ID: 2ASTZ-SMARTBOX Dear Sir/Madam, We, Smart Box Technology LLC Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model:

Product name: Smart Box for Auto Model no.: Smart Box V3 for Auto, Smart Box V3(A/B) for Auto Sincerely, p Sent Robes 74 Name/Title : Robert Smith/Manager Company: Smart Box Technology LLC Address: 1600 Broadway Ste 1600 Denver Colorado United States Phone: (855) 767-8291 Fax: N/A E-Mail: info@smartboxauto.com

Sincerely, Name/Title Robert Smith/Manager Company:

Address:

Phone:

Fax:

E-Mail:

Smart Box Technology LLC 1600 Broadway Ste 1600 Denver Colorado United States

(855) 767-8291 N/A info@smartboxauto.com

Smart Box Technology LLC 1600 Broadway Ste 1600 Denver Colorado United States Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-8-17 To whom it may concern:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behaffin all matters tions for equipment authorization FCC ID: 2ASTZ-SMARTBOX including the signing of all documents related to these matters. relating to appli Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website wwweurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 Sincerely,

) | th f overt Smith Name/Title: Robert Smith/Manager Company: Smart Box Technology LLC Address: 1600 Broadway Ste 1600 Denver Colorado United States Phone: (855) 767-8291 Fax: N/A E-Mail: info@smartboxauto.com

Smart Box Technology LLC 1600 Broadway Ste 1600 Denver Colorado United States Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 2023-8-17 Smart Box Technology LLC acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought

(FCC ID: 2ASTZ-SMARTBOX):

Name and company of U.S. agent:

Smart Box Technology LLC Physical U.S. address of agent:

1600 Broadway Ste 1600 Denver Colorado United States FRN of U.S. agent:

0028339000 Email address of U.S. agent:

info@smartboxauto.com Smart Box Technology LLC acknowledges their obligation to accept service of process on behalf of Smart Box Technology LLC . Smart Box Technology LLC with the FRN [0028339000] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. 5 0 V

, U

) 7

) d

1 1 9 2 _ t n e g A _ S U

l e d o m

_ 8 4 Sincerely, Signature Robert Smith Manager Smart Box Technology LLC Signature Robert Smith Manager Smart Box Technology LLC