US Plug User Manual Safety Please read all of the safety and operating instructions before using your device:
1. The Products are only for indoor use. 1. Do not disassembly the device or attempt to repair. 2. Plug the power cables into properly grounded electrical outlets in order to help prevent against electrical shock. 3. Disconnect the power before you clean the device. 4. The devices are not suitable for use in situations or environments where failure, delay or errors or inaccuracies in the data or information provided by the devices could lead to death, personal injury or severe physical or environmental damage, including without limitation in connection with the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, or life support systems. Specification Model No: SPG-US-01 Input/ Output: 100-120V AC, 50/60Hz, 15A Humidity: 10% to 90% Non-condensing (Operating), 5% to 90% Non-condensing (Storage) Temperature: 0 to 40
(Operating) , -20 to 65
(Storage) Step 1:
To install SmartiBlue app Download the SmartiBlue app from App Store or Google Play. connected with Wi-Fi and Bluetooth. Installation and Setup of SmartiBlue Devices Once SmartiBlue app is installed, launch the app. Make sure your mobile device are Step 2:
Log into your Smart iBlue account, or sign up a new account by following the instruction in the app. Step 4:
After you have logged in your account, tag + icon in the home page of your Smart iBlue app Step 1:
Instruction For US Plug Plug your US Plug into an available outlet and power on the plug, the small LED light at the front will blink steadily, waiting to be associated with your mobile device. Step 2:
In My Device page, tap -Search Device to search the device and finish the association process. You can also name your device after you clicked on it. The small LED light at the front will blink blue rapidly when associating. The light becomes solid blue when the device associated successfully. The notice would be popped out to indicate that the association process is finished. The plug will be shown on the Associated Devices list if associated successfully. Tap the return icon in the top left corner Step 3:
In the home page you will see the name of the associated plug. It means you have successfully associated the plug. Now you can tap the plug to enter the control panel. Here is the control panel. You have successfully set up your Smart iBlue US Plug now. Product name: Smart Plug Model name: SPG-US-01 FCC ID: 2AKSESPGUS-01 Note This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Connect the equipment into an outlet on a circuit different from that to which Increase the separation between the equipment and receiver the receiver is connected
Consult the dealer or an experienced radio/TV technician for help.