S802G01 Simple specification Controller model and size Product features S802G01 is a single channel remote controller Power supplyTwo 3V Button cellCR2325 Working temperature0~+50 Emission Frequency915 MHz Emission power25 mW Emission distance200 meters outdoor,35 meters indoor Standby current30 uA Antenna Gain2 dBi Button description UPIt can control the motor to rotate upward or combine with other keys to change the direction of the motor. DOWNControl the motor to turn downward. STOPIt can control the motor to stop turning. It can also be combined with other keys to match the motor or delete the channel. Signal lightLED Indicator. Pairing buttonIt can be combined with other keys to log in or delete channels. Channel declaration Normal mode915MHz Intelligent mode914MHz916MHzAutomatic selection of one of two channels Operational instructionsThe part that transmits the signal Norma mode 1.PressUPbutton once and it will send aUP signal. 2.PressDOWNbutton once and it will send aDOWN signal. 3.PressSTOPbutton once and it will send aSTOP signal. 4. First, press the Pairing button once, you can see the Signal light will shine, then immediately press the STOP button, as long as the STOP button has been pressed, it will always send the landing signal, release the STOP button, signal stop transmitting. Intelligent modeNeed to link RPT_Node of Hub 1.PressUPbutton once and it will send aUPsignal. 2.PressDOWNbutton once and it will send aDOWNsignal. 3.PressSTOPbutton once and it will send aSTOPsignal. 4. Press Pairing button once, see the signal light on, press STOPonce, signal lignt flash blue quickly, at this time has sent a signal. 15.21&15.105 statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference.
(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.