FCC ID: 2AU8HSRT321-CBRS Indoor CPE

Introduction Panel of Device The IDU is a premium indoor LTE CPE, designed for 802.11a/b/ g/n/ac dual band Wi-Fi access. The product provides optimized high through-

put data and a wide area coverage network for residential, commercial and enterprise users, supporting multiple services. Customers enjoy reliable dual-band Wi-Fi AP functions, broadband access and hot-spot Wi-Fi connections with the IDU. I/O Panel of Router Configure Hardware Insert SIM Card If you want to remove the SIM card, please lightly press the SIM card, the SIM card will pop out. Make sure the CPE is turned off before you insert or remove your SIM card. Otherwise, the CPE and SIM card may be damaged. Please insert your SIM card (3FF) as following:

LED Panel of Router Packing List How does it Work LTE BTS Make sure you have everything you need to properly configure the device. to your requirements. The figure is just for reference only, please connect according LTE Indoor CPE SRT321 Quick Start Guide Configure The CPE Login to the Website Use a browser to access the management web page to configure and manage the CPE. The following procedure describes how to use a computer running Windows 7 or above version and Internet Explorer to connect to the CPE webpage. Connect the CPE correctly. Start Internet Explorer, go to http://192.168.1.1 in the Step 1 Step 2 address bar, and press Enter. Enter the user name (admin) and password (admin), and Step 3 click Log In. You can connect to the management web page after the password is verified. Step 1 Connect the supplied power adapter to the CPE. Step 2 Connect other devices. You can connect your computer or classic Switch via Ethernet cable to LAN port. You can connect your laptop via Wi-Fi. You can connect your telephone via TEL port. When you are using the CPE, you can adjust the position and direction of CPE to get stronger LTE signal, you can judge from the LTE signal LED indicators. LED Indicators When set up the IDU, you will see the following LED indicators:

Indicator Status Description Steady on Power On No Power Supply Steady on Internet Available POWER Off Off INTERNET Blinking

(500ms interval) Internet Unavailable Searching network of LTE Steady on WiFi Available WiFi Off WiFi unavailable Steady on VOICE Available VOICE Off VOICE Unavailable Steady on Display the current LTE network signal, the stronger signal, the more bars on Off SIGNAL No Signal Blinking one by one Firmware upgrade Power Adapter Indoor CPE 1 Wi-Fi 11 a/b/g/n/ac IDU Power supply Ethernet cable 2 3 4 5 Step 1 Connect the CPE correctly. Step 2 Enter the management website. Step 3 Choose Settings Network LTE Settings. Step 4 Set the connection mode and scan mode. Connect the CPE correctly. Enter the management website. Choose Settings Wi-Fi WLAN Settings. In the General Settings, set Wi-Fi Enable or enable Wi-Fi with the Step 1 Step 2 Step 3 Step 4 Wi-Fi button. Step 5 In the Setting, change the SSID, such as "LTE-Router"

To ensure data security, it is recommended that you change Step 6 the Wi-Fi password by default. Step 7 Click Submit to save the settings. Configuration of Wi-Fi Configuration of LTE Troubleshooting This product has reached the standard of shipment inspection. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This equipment has been tested and found to comply with the limits for a

(1) this device may not cause harmful interference, and Class B digital device, pursuant to part 15 of the FCC Rules. These limits

(2) this device must accept any interference received, including are designed to provide reasonable protection against harmful interference that may cause undesired operation. interference in a residential installation. This equipment generates, uses Caution!

and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to Any changes or modifications not expressly approved by the party radio communications. However, there is no guarantee that interference responsible for compliance could void the user's authority to operate the will not occur in a particular installation. If this equipment does cause equipment. Verify that the CPE is correctly connected to the computer through may not be activated or may be limited by local network operators or Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and network service providers, thus the descriptions herein may not exactly match the product or its accessories you purchase. We reserves the right to change or modify any information or specifica-

tions contained in this manual without prior notice or obligation. The POWER indicator does not turn on. Make sure that the power cable is connected properly and the CPE is powered on. Make sure that the power adapter is compatible with the CPE. Fails to login the web management page. Make sure that the CPE is started. Wi-Fi or a network cable. The CPE fails to search for the wireless network. Check that the power adapter is connected properly. Check that the CPE is placed in an open area that is far away from obstructions, such as concrete or wooden walls. Check that the CPE is placed far away from household electrical appliances that generate strong electromagnetic field, such as micro-

wave ovens, refrigerators, and satellite dishes. The power adapter of the CPE is overheated. The CPE will be overheated after being used for a long time. There-

fore, power off the CPE when you are not using it. Check that the CPE is properly ventilated and shielded from direct sunlight. The parameters are restored to default values. If the CPE is powered off unexpectedly while being configured, the parameters may be restored to the default settings. After configuring the parameters, download the configuration file to quickly restore the CPE to the desired settings. If the problem persists,please contact authorized local service suppliers. harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement. The default setting is automatically connection and full band scanning,if you want to connect the LTE network according to your needs,you can set the connection mode as manual,and simply scan a specified band. 6 7 8 FCC ID2AU8HSRT321-CBRS

Fsmawnve B42/43/48 Model: SRT321 Wi-Fi SSID (2.4G) : Altice_XXXX

- . Wi-Fi SSID (5G) : Altice_5 XXXX Device IP: 192.168.1.1 WPAD-PSK: XO RXXKK User Name: admin S/N: 1234567890123456 Password: admin UTAOOUAU ALANA see IMEI: 12345678901234 UAL AAT a MAG: 123456789012 Imtcrerence tat ay inca IANO AAMT ccc"

FCC ID: 2AU8HSRT321-CBRS POWER RATING: 12V==2.0A MADE IN CHINA Size: 69.8x39.8mm QTY: 1pcs

a) b) c) d) e) f) g) SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Smawave Technology Co. ,Ltd 3/F, Building 8, 1001 North Qinzhou Road, Xuhui District, Shanghai, China Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name Leven Liang 2AU8H 2AU8HSRT321-CBRS leven.liang@smawave.com 13956549394 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date: 2022-03-03 Print Name:

Leven Liang Certification engineer Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

Smawave Technology Co. ,Ltd TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Date: 2022-03-03 Regarding: 2AU8HSRT321-CBRS To whom it may concern:

We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Smawave Technology Co. ,Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Leven Liang Signature:

On behalf of Company: Smawave Technology Co. ,Ltd Telephone: 13956549394 Title: Certification engineer

Confidentiality Request regarding application for FCC ID: 2AU8HSRT321-CBRS SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Smawave Technology Co. ,Ltd To:

From: Smawave Technology Co. ,Ltd 3/F, Building 8, 1001 North Qinzhou Road, Xuhui District, Shanghai, China Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions NII Software Security Info Tune-up BOM The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature:

Printed Name (on file with the FCC associated with the Grantee Code): Leven Liang Title: Certification engineer Company Name: Smawave Technology Co. ,Ltd

Smawave Technology Co. ,Ltd Date: 2022-03-15 Declaration Letter about Spectrum Access Mechanism To whom it may concern, WE (Smawave Technology Co. ,Ltd) HEREBY DECLARED THAT Our product Product Description:

Indoor CPE Model No:

FCC ID:

SRT321 2AU8HSRT321-CBRS The LTE Band 42 (frequency 3550MHz-3600MHz) and Band43(frequency 3600MHz-3700MHz) uses the same spectrum access mechanism with SAS as Band 48. Name (Printed): Leven Liang Signature:

Title: Certification engineer On behalf of Company: Smawave Technology Co. ,Ltd

Smawave Technology Co. ,Ltd We Smawave Technology Co. ,Ltd declare that this EUT (FCC ID: 2AU8HSRT321-CBRS) doesnt have ad Hoc Mode function on non-US/Canada frequencies. In addition, the frequency selection feature is disabled by firmware for devices marketed to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America. Country code selection is disabled Should you have any question or comments regarding this matter, please have my best attestation Sincerely yours Print Name: Leven Liang Title: Certification engineer Signature: