FCC ID: 2AU8HSRT321 LTE-A Hotspot

Introduction Panel of Device The IDU is a premium indoor LTE CPE, designed for 802.11a/b/ g/n/ac dual band Wi-Fi access. The product provides optimized high through-

put data and a wide area coverage network for residential, commercial and enterprise users, supporting multiple services. Customers enjoy reliable dual-band Wi-Fi AP functions, broadband access and hot-spot Wi-Fi connections with the IDU. I/O Panel of Router Configure Hardware Insert SIM Card If you want to remove the SIM card, please lightly press the SIM card, the SIM card will pop out. Make sure the CPE is turned off before you insert or remove your SIM card. Otherwise, the CPE and SIM card may be damaged. Please insert your SIM card (3FF) as following:

LED Panel of Router Packing List How does it Work LTE BTS Make sure you have everything you need to properly configure the device. to your requirements. The figure is just for reference only, please connect according LTE Indoor CPE SRT321 Quick Start Guide Configure The CPE Login to the Website Use a browser to access the management web page to configure and manage the CPE. The following procedure describes how to use a computer running Windows 7 or above version and Internet Explorer to connect to the CPE webpage. Connect the CPE correctly. Start Internet Explorer, go to http://192.168.1.1 in the Step 1 Step 2 address bar, and press Enter. Enter the user name (admin) and password (admin), and Step 3 click Log In. You can connect to the management web page after the password is verified. Step 1 Connect the supplied power adapter to the CPE. Step 2 Connect other devices. You can connect your computer or classic Switch via Ethernet cable to LAN port. You can connect your laptop via Wi-Fi. You can connect your telephone via TEL port. When you are using the CPE, you can adjust the position and direction of CPE to get stronger LTE signal, you can judge from the LTE signal LED indicators. LED Indicators When set up the IDU, you will see the following LED indicators:

Indicator Status Description Steady on Power On No Power Supply Steady on Internet Available POWER Off Off INTERNET Blinking

(500ms interval) Internet Unavailable Searching network of LTE Steady on WiFi Available WiFi Off WiFi unavailable Steady on VOICE Available VOICE Off VOICE Unavailable Steady on Display the current LTE network signal, the stronger signal, the more bars on Off SIGNAL No Signal Blinking one by one Firmware upgrade Power Adapter Indoor CPE 1 Wi-Fi 11 a/b/g/n/ac IDU Power supply Ethernet cable 2 3 4 5 Step 1 Connect the CPE correctly. Step 2 Enter the management website. Step 3 Choose Settings Network LTE Settings. Step 4 Set the connection mode and scan mode. Connect the CPE correctly. Enter the management website. Choose Settings Wi-Fi WLAN Settings. In the General Settings, set Wi-Fi Enable or enable Wi-Fi with the Step 1 Step 2 Step 3 Step 4 Wi-Fi button. Step 5 In the Setting, change the SSID, such as "LTE-Router"

To ensure data security, it is recommended that you change Step 6 the Wi-Fi password by default. Step 7 Click Submit to save the settings. Configuration of Wi-Fi Configuration of LTE Troubleshooting This product has reached the standard of shipment inspection. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This equipment has been tested and found to comply with the limits for a

(1) this device may not cause harmful interference, and Class B digital device, pursuant to part 15 of the FCC Rules. These limits

(2) this device must accept any interference received, including are designed to provide reasonable protection against harmful interference that may cause undesired operation. interference in a residential installation. This equipment generates, uses Caution!

and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to Any changes or modifications not expressly approved by the party radio communications. However, there is no guarantee that interference responsible for compliance could void the user's authority to operate the will not occur in a particular installation. If this equipment does cause equipment. Verify that the CPE is correctly connected to the computer through may not be activated or may be limited by local network operators or Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and network service providers, thus the descriptions herein may not exactly match the product or its accessories you purchase. We reserves the right to change or modify any information or specifica-

tions contained in this manual without prior notice or obligation. The POWER indicator does not turn on. Make sure that the power cable is connected properly and the CPE is powered on. Make sure that the power adapter is compatible with the CPE. Fails to login the web management page. Make sure that the CPE is started. Wi-Fi or a network cable. The CPE fails to search for the wireless network. Check that the power adapter is connected properly. Check that the CPE is placed in an open area that is far away from obstructions, such as concrete or wooden walls. Check that the CPE is placed far away from household electrical appliances that generate strong electromagnetic field, such as micro-

wave ovens, refrigerators, and satellite dishes. The power adapter of the CPE is overheated. The CPE will be overheated after being used for a long time. There-

fore, power off the CPE when you are not using it. Check that the CPE is properly ventilated and shielded from direct sunlight. The parameters are restored to default values. If the CPE is powered off unexpectedly while being configured, the parameters may be restored to the default settings. After configuring the parameters, download the configuration file to quickly restore the CPE to the desired settings. If the problem persists,please contact authorized local service suppliers. harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement. The default setting is automatically connection and full band scanning,if you want to connect the LTE network according to your needs,you can set the connection mode as manual,and simply scan a specified band. 6 7 8

omnwave 82/4/42 Model: SRT321 Wi-Fi SSID (2.4G) : Altice_XXXX eee ree Device IP: 192.168.1.1 WAZ PSK: XSCGOOOX User Name: admin Password: admin UNL AMTUINITTct a POWER RATING: 12V=2.0A MADE IN CHINA Size: 69.8x39.8mm QTY: 1pces 7 18 1920 21 82/4/82 Wo Ss

wn

=_ CULL AM initiation FE POWER RATING: 12V 2.0 MADE IN CHINA ai : & a Box label Foprwwe B2/4/42 Model: SRT321 Device IP: 192.168.1.1 SIN: 1234567890123456 UIA AU IMEI: 12345678901234 UU AANUUA NAUKA MAC: 123456789012 a UNAM POWER RATING:12V = 2.0A MADE IN CHINA Size: 80x50mm QTY: 1pes

Smawave Technology Co. ,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD21046 Subject; Request for Long Term Confidentiality FCC ID: 2AU8HSRT321 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Description UNII declaration letter It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Date: 2021-12-4 Signature:

Name(in print): Leven Liang Company: Smawave Technology Co. ,Ltd Adreess: 3F Building 8 1001 North Qinzhou RoadXuhui District Shanghai China

Company: Smawave Technology Co. ,Ltd Date:2021/12/7 DTS-UNII Declaration Letter To whom it may concern We have declared below featured for FCC equipment authorization. Device FCC ID:

2AU8HSRT321 1. Active/ Passive Scanning, ad Hoc mode access point capability 2412-2462MHz yes No 5150-5250MHz yes No 5725-5825MHz yes No yes No yes No yes No yes No yes No yes No yes No yes No yes No Meet FCC part 15.202 /RSS-247, Issue 2, Section 6.4 a)requirement- Yes, No pls check below A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.... Sincerely, Signature:

China Name(in print): Leven Liang Company: Smawave Technology Co. ,Ltd Adreess:

3F Building 8 1001 North Qinzhou RoadXuhui District Shanghai

Smawave Technology Co. ,Ltd POWER OF ATTORNEY DATE:December 4, 2021 To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 We, the undersigned, hereby authorize TA Technology (Shanghai) Co., Ltd./zhao junlin on our behalf, to apply to FCC on our equipment for FCC ID: 2AU8HSRT321. Any and all acts carried out by TA Technology (Shanghai) Co., Ltd. on our behalf shall have the same effect as acts of our own for this certificate. Sincerely, Signature:

Name(in print): Leven Liang Company: Smawave Technology Co. ,Ltd Adreess: 3F Building 8 1001 North Qinzhou RoadXuhui District Shanghai China